OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
b246eebb0a
qemu-e2k/hw/acpi_piix4.c
Isaku Yamahata ac4040955b pci hotadd, acpi_piix4: remove global variables 
remove global variables, gpe and pci0_status by moving them
into PIIX4PMState.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-15 16:28:56 +00:00

622 lines
16 KiB
C
Raw Blame History

/*
* ACPI implementation
*
* Copyright (c) 2006 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2 as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>
*/
#include "hw.h"
#include "pc.h"
#include "apm.h"
#include "pm_smbus.h"
#include "pci.h"
#include "sysemu.h"
#include "i2c.h"
#include "smbus.h"
#include "acpi.h"
//#define DEBUG
#define ACPI_DBG_IO_ADDR 0xb044
#define GPE_BASE 0xafe0
#define PCI_BASE 0xae00
#define PCI_EJ_BASE 0xae08
struct gpe_regs {
uint16_t sts; /* status */
uint16_t en; /* enabled */
};
struct pci_status {
uint32_t up;
uint32_t down;
};
typedef struct PIIX4PMState {
PCIDevice dev;
uint16_t pmsts;
uint16_t pmen;
uint16_t pmcntrl;
APMState apm;
QEMUTimer *tmr_timer;
int64_t tmr_overflow_time;
PMSMBus smb;
uint32_t smb_io_base;
qemu_irq irq;
qemu_irq cmos_s3;
qemu_irq smi_irq;
int kvm_enabled;
/* for pci hotplug */
struct gpe_regs gpe;
struct pci_status pci0_status;
} PIIX4PMState;
static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s);
#define ACPI_ENABLE 0xf1
#define ACPI_DISABLE 0xf0
static uint32_t get_pmtmr(PIIX4PMState *s)
{
uint32_t d;
d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY, get_ticks_per_sec());
return d & 0xffffff;
}
static int get_pmsts(PIIX4PMState *s)
{
int64_t d;
d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
get_ticks_per_sec());
if (d >= s->tmr_overflow_time)
s->pmsts |= ACPI_BITMASK_TIMER_STATUS;
return s->pmsts;
}
static void pm_update_sci(PIIX4PMState *s)
{
int sci_level, pmsts;
int64_t expire_time;
pmsts = get_pmsts(s);
sci_level = (((pmsts & s->pmen) &
(ACPI_BITMASK_RT_CLOCK_ENABLE |
ACPI_BITMASK_POWER_BUTTON_ENABLE |
ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
ACPI_BITMASK_TIMER_ENABLE)) != 0);
qemu_set_irq(s->irq, sci_level);
/* schedule a timer interruption if needed */
if ((s->pmen & ACPI_BITMASK_TIMER_ENABLE) &&
!(pmsts & ACPI_BITMASK_TIMER_STATUS)) {
expire_time = muldiv64(s->tmr_overflow_time, get_ticks_per_sec(),
PM_TIMER_FREQUENCY);
qemu_mod_timer(s->tmr_timer, expire_time);
} else {
qemu_del_timer(s->tmr_timer);
}
}
static void pm_tmr_timer(void *opaque)
{
PIIX4PMState *s = opaque;
pm_update_sci(s);
}
static void pm_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
{
PIIX4PMState *s = opaque;
addr &= 0x3f;
switch(addr) {
case 0x00:
{
int64_t d;
int pmsts;
pmsts = get_pmsts(s);
if (pmsts & val & ACPI_BITMASK_TIMER_STATUS) {
/* if TMRSTS is reset, then compute the new overflow time */
d = muldiv64(qemu_get_clock(vm_clock), PM_TIMER_FREQUENCY,
get_ticks_per_sec());
s->tmr_overflow_time = (d + 0x800000LL) & ~0x7fffffLL;
}
s->pmsts &= ~val;
pm_update_sci(s);
}
break;
case 0x02:
s->pmen = val;
pm_update_sci(s);
break;
case 0x04:
{
int sus_typ;
s->pmcntrl = val & ~(ACPI_BITMASK_SLEEP_ENABLE);
if (val & ACPI_BITMASK_SLEEP_ENABLE) {
/* change suspend type */
sus_typ = (val >> 10) & 7;
switch(sus_typ) {
case 0: /* soft power off */
qemu_system_shutdown_request();
break;
case 1:
/* ACPI_BITMASK_WAKE_STATUS should be set on resume.
Pretend that resume was caused by power button */
s->pmsts |= (ACPI_BITMASK_WAKE_STATUS |
ACPI_BITMASK_POWER_BUTTON_STATUS);
qemu_system_reset_request();
if (s->cmos_s3) {
qemu_irq_raise(s->cmos_s3);
}
default:
break;
}
}
}
break;
default:
break;
}
#ifdef DEBUG
printf("PM writew port=0x%04x val=0x%04x\n", addr, val);
#endif
}
static uint32_t pm_ioport_readw(void *opaque, uint32_t addr)
{
PIIX4PMState *s = opaque;
uint32_t val;
addr &= 0x3f;
switch(addr) {
case 0x00:
val = get_pmsts(s);
break;
case 0x02:
val = s->pmen;
break;
case 0x04:
val = s->pmcntrl;
break;
default:
val = 0;
break;
}
#ifdef DEBUG
printf("PM readw port=0x%04x val=0x%04x\n", addr, val);
#endif
return val;
}
static void pm_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
{
// PIIX4PMState *s = opaque;
#ifdef DEBUG
addr &= 0x3f;
printf("PM writel port=0x%04x val=0x%08x\n", addr, val);
#endif
}
static uint32_t pm_ioport_readl(void *opaque, uint32_t addr)
{
PIIX4PMState *s = opaque;
uint32_t val;
addr &= 0x3f;
switch(addr) {
case 0x08:
val = get_pmtmr(s);
break;
default:
val = 0;
break;
}
#ifdef DEBUG
printf("PM readl port=0x%04x val=0x%08x\n", addr, val);
#endif
return val;
}
static void apm_ctrl_changed(uint32_t val, void *arg)
{
PIIX4PMState *s = arg;
/* ACPI specs 3.0, 4.7.2.5 */
if (val == ACPI_ENABLE) {
s->pmcntrl |= ACPI_BITMASK_SCI_ENABLE;
} else if (val == ACPI_DISABLE) {
s->pmcntrl &= ~ACPI_BITMASK_SCI_ENABLE;
}
if (s->dev.config[0x5b] & (1 << 1)) {
if (s->smi_irq) {
qemu_irq_raise(s->smi_irq);
}
}
}
static void acpi_dbg_writel(void *opaque, uint32_t addr, uint32_t val)
{
#if defined(DEBUG)
printf("ACPI: DBG: 0x%08x\n", val);
#endif
}
static void pm_io_space_update(PIIX4PMState *s)
{
uint32_t pm_io_base;
if (s->dev.config[0x80] & 1) {
pm_io_base = le32_to_cpu(*(uint32_t *)(s->dev.config + 0x40));
pm_io_base &= 0xffc0;
/* XXX: need to improve memory and ioport allocation */
#if defined(DEBUG)
printf("PM: mapping to 0x%x\n", pm_io_base);
#endif
register_ioport_write(pm_io_base, 64, 2, pm_ioport_writew, s);
register_ioport_read(pm_io_base, 64, 2, pm_ioport_readw, s);
register_ioport_write(pm_io_base, 64, 4, pm_ioport_writel, s);
register_ioport_read(pm_io_base, 64, 4, pm_ioport_readl, s);
}
}
static void pm_write_config(PCIDevice *d,
uint32_t address, uint32_t val, int len)
{
pci_default_write_config(d, address, val, len);
if (range_covers_byte(address, len, 0x80))
pm_io_space_update((PIIX4PMState *)d);
}
static int vmstate_acpi_post_load(void *opaque, int version_id)
{
PIIX4PMState *s = opaque;
pm_io_space_update(s);
return 0;
}
static const VMStateDescription vmstate_acpi = {
.name = "piix4_pm",
.version_id = 1,
.minimum_version_id = 1,
.minimum_version_id_old = 1,
.post_load = vmstate_acpi_post_load,
.fields = (VMStateField []) {
VMSTATE_PCI_DEVICE(dev, PIIX4PMState),
VMSTATE_UINT16(pmsts, PIIX4PMState),
VMSTATE_UINT16(pmen, PIIX4PMState),
VMSTATE_UINT16(pmcntrl, PIIX4PMState),
VMSTATE_STRUCT(apm, PIIX4PMState, 0, vmstate_apm, APMState),
VMSTATE_TIMER(tmr_timer, PIIX4PMState),
VMSTATE_INT64(tmr_overflow_time, PIIX4PMState),
VMSTATE_END_OF_LIST()
}
};
static void piix4_reset(void *opaque)
{
PIIX4PMState *s = opaque;
uint8_t *pci_conf = s->dev.config;
pci_conf[0x58] = 0;
pci_conf[0x59] = 0;
pci_conf[0x5a] = 0;
pci_conf[0x5b] = 0;
if (s->kvm_enabled) {
/* Mark SMM as already inited (until KVM supports SMM). */
pci_conf[0x5B] = 0x02;
}
}
static void piix4_powerdown(void *opaque, int irq, int power_failing)
{
PIIX4PMState *s = opaque;
if (!s) {
qemu_system_shutdown_request();
} else if (s->pmen & ACPI_BITMASK_POWER_BUTTON_ENABLE) {
s->pmsts |= ACPI_BITMASK_POWER_BUTTON_STATUS;
pm_update_sci(s);
}
}
static int piix4_pm_initfn(PCIDevice *dev)
{
PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev, dev);
uint8_t *pci_conf;
pci_conf = s->dev.config;
pci_config_set_vendor_id(pci_conf, PCI_VENDOR_ID_INTEL);
pci_config_set_device_id(pci_conf, PCI_DEVICE_ID_INTEL_82371AB_3);
pci_conf[0x06] = 0x80;
pci_conf[0x07] = 0x02;
pci_conf[0x08] = 0x03; // revision number
pci_conf[0x09] = 0x00;
pci_config_set_class(pci_conf, PCI_CLASS_BRIDGE_OTHER);
pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
pci_conf[0x3d] = 0x01; // interrupt pin 1
pci_conf[0x40] = 0x01; /* PM io base read only bit */
/* APM */
apm_init(&s->apm, apm_ctrl_changed, s);
register_ioport_write(ACPI_DBG_IO_ADDR, 4, 4, acpi_dbg_writel, s);
if (s->kvm_enabled) {
/* Mark SMM as already inited to prevent SMM from running. KVM does not
* support SMM mode. */
pci_conf[0x5B] = 0x02;
}
/* XXX: which specification is used ? The i82731AB has different
mappings */
pci_conf[0x5f] = (parallel_hds[0] != NULL ? 0x80 : 0) | 0x10;
pci_conf[0x63] = 0x60;
pci_conf[0x67] = (serial_hds[0] != NULL ? 0x08 : 0) |
(serial_hds[1] != NULL ? 0x90 : 0);
pci_conf[0x90] = s->smb_io_base | 1;
pci_conf[0x91] = s->smb_io_base >> 8;
pci_conf[0xd2] = 0x09;
register_ioport_write(s->smb_io_base, 64, 1, smb_ioport_writeb, &s->smb);
register_ioport_read(s->smb_io_base, 64, 1, smb_ioport_readb, &s->smb);
s->tmr_timer = qemu_new_timer(vm_clock, pm_tmr_timer, s);
qemu_system_powerdown = *qemu_allocate_irqs(piix4_powerdown, s, 1);
pm_smbus_init(&s->dev.qdev, &s->smb);
qemu_register_reset(piix4_reset, s);
piix4_acpi_system_hot_add_init(dev->bus, s);
return 0;
}
i2c_bus *piix4_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
qemu_irq sci_irq, qemu_irq cmos_s3, qemu_irq smi_irq,
int kvm_enabled)
{
PCIDevice *dev;
PIIX4PMState *s;
dev = pci_create(bus, devfn, "PIIX4_PM");
qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
s = DO_UPCAST(PIIX4PMState, dev, dev);
s->irq = sci_irq;
s->cmos_s3 = cmos_s3;
s->smi_irq = smi_irq;
s->kvm_enabled = kvm_enabled;
qdev_init_nofail(&dev->qdev);
return s->smb.smbus;
}
static PCIDeviceInfo piix4_pm_info = {
.qdev.name = "PIIX4_PM",
.qdev.desc = "PM",
.qdev.size = sizeof(PIIX4PMState),
.qdev.vmsd = &vmstate_acpi,
.init = piix4_pm_initfn,
.config_write = pm_write_config,
.qdev.props = (Property[]) {
DEFINE_PROP_UINT32("smb_io_base", PIIX4PMState, smb_io_base, 0),
DEFINE_PROP_END_OF_LIST(),
}
};
static void piix4_pm_register(void)
{
pci_qdev_register(&piix4_pm_info);
}
device_init(piix4_pm_register);
static uint32_t gpe_read_val(uint16_t val, uint32_t addr)
{
if (addr & 1)
return (val >> 8) & 0xff;
return val & 0xff;
}
static uint32_t gpe_readb(void *opaque, uint32_t addr)
{
uint32_t val = 0;
struct gpe_regs *g = opaque;
switch (addr) {
case GPE_BASE:
case GPE_BASE + 1:
val = gpe_read_val(g->sts, addr);
break;
case GPE_BASE + 2:
case GPE_BASE + 3:
val = gpe_read_val(g->en, addr);
break;
default:
break;
}
#if defined(DEBUG)
printf("gpe read %x == %x\n", addr, val);
#endif
return val;
}
static void gpe_write_val(uint16_t *cur, int addr, uint32_t val)
{
if (addr & 1)
*cur = (*cur & 0xff) | (val << 8);
else
*cur = (*cur & 0xff00) | (val & 0xff);
}
static void gpe_reset_val(uint16_t *cur, int addr, uint32_t val)
{
uint16_t x1, x0 = val & 0xff;
int shift = (addr & 1) ? 8 : 0;
x1 = (*cur >> shift) & 0xff;
x1 = x1 & ~x0;
*cur = (*cur & (0xff << (8 - shift))) | (x1 << shift);
}
static void gpe_writeb(void *opaque, uint32_t addr, uint32_t val)
{
struct gpe_regs *g = opaque;
switch (addr) {
case GPE_BASE:
case GPE_BASE + 1:
gpe_reset_val(&g->sts, addr, val);
break;
case GPE_BASE + 2:
case GPE_BASE + 3:
gpe_write_val(&g->en, addr, val);
break;
default:
break;
}
#if defined(DEBUG)
printf("gpe write %x <== %d\n", addr, val);
#endif
}
static uint32_t pcihotplug_read(void *opaque, uint32_t addr)
{
uint32_t val = 0;
struct pci_status *g = opaque;
switch (addr) {
case PCI_BASE:
val = g->up;
break;
case PCI_BASE + 4:
val = g->down;
break;
default:
break;
}
#if defined(DEBUG)
printf("pcihotplug read %x == %x\n", addr, val);
#endif
return val;
}
static void pcihotplug_write(void *opaque, uint32_t addr, uint32_t val)
{
struct pci_status *g = opaque;
switch (addr) {
case PCI_BASE:
g->up = val;
break;
case PCI_BASE + 4:
g->down = val;
break;
}
#if defined(DEBUG)
printf("pcihotplug write %x <== %d\n", addr, val);
#endif
}
static uint32_t pciej_read(void *opaque, uint32_t addr)
{
#if defined(DEBUG)
printf("pciej read %x\n", addr);
#endif
return 0;
}
static void pciej_write(void *opaque, uint32_t addr, uint32_t val)
{
BusState *bus = opaque;
DeviceState *qdev, *next;
PCIDevice *dev;
int slot = ffs(val) - 1;
QLIST_FOREACH_SAFE(qdev, &bus->children, sibling, next) {
dev = DO_UPCAST(PCIDevice, qdev, qdev);
if (PCI_SLOT(dev->devfn) == slot) {
qdev_free(qdev);
}
}
#if defined(DEBUG)
printf("pciej write %x <== %d\n", addr, val);
#endif
}
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state);
static void piix4_acpi_system_hot_add_init(PCIBus *bus, PIIX4PMState *s)
{
struct gpe_regs *gpe = &s->gpe;
struct pci_status *pci0_status = &s->pci0_status;
register_ioport_write(GPE_BASE, 4, 1, gpe_writeb, gpe);
register_ioport_read(GPE_BASE, 4, 1, gpe_readb, gpe);
register_ioport_write(PCI_BASE, 8, 4, pcihotplug_write, pci0_status);
register_ioport_read(PCI_BASE, 8, 4, pcihotplug_read, pci0_status);
register_ioport_write(PCI_EJ_BASE, 4, 4, pciej_write, bus);
register_ioport_read(PCI_EJ_BASE, 4, 4, pciej_read, bus);
pci_bus_hotplug(bus, piix4_device_hotplug, &s->dev.qdev);
}
static void enable_device(PIIX4PMState *s, int slot)
{
s->gpe.sts |= 2;
s->pci0_status.up |= (1 << slot);
}
static void disable_device(PIIX4PMState *s, int slot)
{
s->gpe.sts |= 2;
s->pci0_status.down |= (1 << slot);
}
static int piix4_device_hotplug(DeviceState *qdev, PCIDevice *dev, int state)
{
int slot = PCI_SLOT(dev->devfn);
PIIX4PMState *s = DO_UPCAST(PIIX4PMState, dev,
DO_UPCAST(PCIDevice, qdev, qdev));
s->pci0_status.up = 0;
s->pci0_status.down = 0;
if (state) {
enable_device(s, slot);
} else {
disable_device(s, slot);
}
if (s->gpe.en & 2) {
qemu_set_irq(s->irq, 1);
qemu_set_irq(s->irq, 0);
}
return 0;
}
Reference in New Issue View Git Blame Copy Permalink