qemu-e2k/hw/misc/max111x.c
Peter Maydell 3029681235 hw/misc/max111x: Create header file for documentation, TYPE_ macros
Create a header file for the hw/misc/max111x device, in the
usual modern style for QOM devices:
 * definition of the TYPE_ constants and macros
 * definition of the device's state struct so that it can
   be embedded in other structs if desired
 * documentation of the interface

This allows us to use TYPE_MAX_1111 in the spitz.c code rather
than the string "max1111".

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200628142429.17111-12-peter.maydell@linaro.org
2020-07-03 16:59:45 +01:00

236 lines
6.0 KiB
C

/*
* Maxim MAX1110/1111 ADC chip emulation.
*
* Copyright (c) 2006 Openedhand Ltd.
* Written by Andrzej Zaborowski <balrog@zabor.org>
*
* This code is licensed under the GNU GPLv2.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "hw/misc/max111x.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#include "qemu/module.h"
#include "hw/qdev-properties.h"
/* Control-byte bitfields */
#define CB_PD0 (1 << 0)
#define CB_PD1 (1 << 1)
#define CB_SGL (1 << 2)
#define CB_UNI (1 << 3)
#define CB_SEL0 (1 << 4)
#define CB_SEL1 (1 << 5)
#define CB_SEL2 (1 << 6)
#define CB_START (1 << 7)
#define CHANNEL_NUM(v, b0, b1, b2) \
((((v) >> (2 + (b0))) & 4) | \
(((v) >> (3 + (b1))) & 2) | \
(((v) >> (4 + (b2))) & 1))
static uint32_t max111x_read(MAX111xState *s)
{
if (!s->tb1)
return 0;
switch (s->cycle ++) {
case 1:
return s->rb2;
case 2:
return s->rb3;
}
return 0;
}
/* Interpret a control-byte */
static void max111x_write(MAX111xState *s, uint32_t value)
{
int measure, chan;
/* Ignore the value if START bit is zero */
if (!(value & CB_START))
return;
s->cycle = 0;
if (!(value & CB_PD1)) {
s->tb1 = 0;
return;
}
s->tb1 = value;
if (s->inputs == 8)
chan = CHANNEL_NUM(value, 1, 0, 2);
else
chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2);
if (value & CB_SGL)
measure = s->input[chan] - s->com;
else
measure = s->input[chan] - s->input[chan ^ 1];
if (!(value & CB_UNI))
measure ^= 0x80;
s->rb2 = (measure >> 2) & 0x3f;
s->rb3 = (measure << 6) & 0xc0;
/* FIXME: When should the IRQ be lowered? */
qemu_irq_raise(s->interrupt);
}
static uint32_t max111x_transfer(SSISlave *dev, uint32_t value)
{
MAX111xState *s = MAX_111X(dev);
max111x_write(s, value);
return max111x_read(s);
}
static const VMStateDescription vmstate_max111x = {
.name = "max111x",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_SSI_SLAVE(parent_obj, MAX111xState),
VMSTATE_UINT8(tb1, MAX111xState),
VMSTATE_UINT8(rb2, MAX111xState),
VMSTATE_UINT8(rb3, MAX111xState),
VMSTATE_INT32_EQUAL(inputs, MAX111xState, NULL),
VMSTATE_INT32(com, MAX111xState),
VMSTATE_ARRAY_INT32_UNSAFE(input, MAX111xState, inputs,
vmstate_info_uint8, uint8_t),
VMSTATE_END_OF_LIST()
}
};
static void max111x_input_set(void *opaque, int line, int value)
{
MAX111xState *s = MAX_111X(opaque);
assert(line >= 0 && line < s->inputs);
s->input[line] = value;
}
static int max111x_init(SSISlave *d, int inputs)
{
DeviceState *dev = DEVICE(d);
MAX111xState *s = MAX_111X(dev);
qdev_init_gpio_out(dev, &s->interrupt, 1);
qdev_init_gpio_in(dev, max111x_input_set, inputs);
s->inputs = inputs;
return 0;
}
static void max1110_realize(SSISlave *dev, Error **errp)
{
max111x_init(dev, 8);
}
static void max1111_realize(SSISlave *dev, Error **errp)
{
max111x_init(dev, 4);
}
static void max111x_reset(DeviceState *dev)
{
MAX111xState *s = MAX_111X(dev);
int i;
for (i = 0; i < s->inputs; i++) {
s->input[i] = s->reset_input[i];
}
s->com = 0;
s->tb1 = 0;
s->rb2 = 0;
s->rb3 = 0;
s->cycle = 0;
}
static Property max1110_properties[] = {
/* Reset values for ADC inputs */
DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0),
DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0),
DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0),
DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0),
DEFINE_PROP_END_OF_LIST(),
};
static Property max1111_properties[] = {
/* Reset values for ADC inputs */
DEFINE_PROP_UINT8("input0", MAX111xState, reset_input[0], 0xf0),
DEFINE_PROP_UINT8("input1", MAX111xState, reset_input[1], 0xe0),
DEFINE_PROP_UINT8("input2", MAX111xState, reset_input[2], 0xd0),
DEFINE_PROP_UINT8("input3", MAX111xState, reset_input[3], 0xc0),
DEFINE_PROP_UINT8("input4", MAX111xState, reset_input[4], 0xb0),
DEFINE_PROP_UINT8("input5", MAX111xState, reset_input[5], 0xa0),
DEFINE_PROP_UINT8("input6", MAX111xState, reset_input[6], 0x90),
DEFINE_PROP_UINT8("input7", MAX111xState, reset_input[7], 0x80),
DEFINE_PROP_END_OF_LIST(),
};
static void max111x_class_init(ObjectClass *klass, void *data)
{
SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
k->transfer = max111x_transfer;
dc->reset = max111x_reset;
dc->vmsd = &vmstate_max111x;
}
static const TypeInfo max111x_info = {
.name = TYPE_MAX_111X,
.parent = TYPE_SSI_SLAVE,
.instance_size = sizeof(MAX111xState),
.class_init = max111x_class_init,
.abstract = true,
};
static void max1110_class_init(ObjectClass *klass, void *data)
{
SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
k->realize = max1110_realize;
device_class_set_props(dc, max1110_properties);
}
static const TypeInfo max1110_info = {
.name = TYPE_MAX_1110,
.parent = TYPE_MAX_111X,
.class_init = max1110_class_init,
};
static void max1111_class_init(ObjectClass *klass, void *data)
{
SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
k->realize = max1111_realize;
device_class_set_props(dc, max1111_properties);
}
static const TypeInfo max1111_info = {
.name = TYPE_MAX_1111,
.parent = TYPE_MAX_111X,
.class_init = max1111_class_init,
};
static void max111x_register_types(void)
{
type_register_static(&max111x_info);
type_register_static(&max1110_info);
type_register_static(&max1111_info);
}
type_init(max111x_register_types)