6574232fff
Migration downtime estimation is calculated based on bandwidth and remaining migration data. This assumes that loading of migration data in the destination takes a negligible amount of time and that downtime depends only on network speed. While this may be true for RAM, it's not necessarily true for other migrated devices. For example, loading the data of a VFIO device in the destination might require from the device to allocate resources, prepare internal data structures and so on. These operations can take a significant amount of time which can increase migration downtime. This patch adds a new capability "switchover ack" that prevents the source from stopping the VM and completing the migration until an ACK is received from the destination that it's OK to do so. This can be used by migrated devices in various ways to reduce downtime. For example, a device can send initial precopy metadata to pre-allocate resources in the destination and use this capability to make sure that the pre-allocation is completed before the source VM is stopped, so it will have full effect. This new capability relies on the return path capability to communicate from the destination back to the source. The actual implementation of the capability will be added in the following patches. Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Tested-by: YangHang Liu <yanghliu@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com>
2163 lines
67 KiB
Python
2163 lines
67 KiB
Python
# -*- Mode: Python -*-
|
|
# vim: filetype=python
|
|
#
|
|
|
|
##
|
|
# = Migration
|
|
##
|
|
|
|
{ 'include': 'common.json' }
|
|
{ 'include': 'sockets.json' }
|
|
|
|
##
|
|
# @MigrationStats:
|
|
#
|
|
# Detailed migration status.
|
|
#
|
|
# @transferred: amount of bytes already transferred to the target VM
|
|
#
|
|
# @remaining: amount of bytes remaining to be transferred to the
|
|
# target VM
|
|
#
|
|
# @total: total amount of bytes involved in the migration process
|
|
#
|
|
# @duplicate: number of duplicate (zero) pages (since 1.2)
|
|
#
|
|
# @skipped: number of skipped zero pages (since 1.5)
|
|
#
|
|
# @normal: number of normal pages (since 1.2)
|
|
#
|
|
# @normal-bytes: number of normal bytes sent (since 1.2)
|
|
#
|
|
# @dirty-pages-rate: number of pages dirtied by second by the guest
|
|
# (since 1.3)
|
|
#
|
|
# @mbps: throughput in megabits/sec. (since 1.6)
|
|
#
|
|
# @dirty-sync-count: number of times that dirty ram was synchronized
|
|
# (since 2.1)
|
|
#
|
|
# @postcopy-requests: The number of page requests received from the
|
|
# destination (since 2.7)
|
|
#
|
|
# @page-size: The number of bytes per page for the various page-based
|
|
# statistics (since 2.10)
|
|
#
|
|
# @multifd-bytes: The number of bytes sent through multifd (since 3.0)
|
|
#
|
|
# @pages-per-second: the number of memory pages transferred per second
|
|
# (Since 4.0)
|
|
#
|
|
# @precopy-bytes: The number of bytes sent in the pre-copy phase
|
|
# (since 7.0).
|
|
#
|
|
# @downtime-bytes: The number of bytes sent while the guest is paused
|
|
# (since 7.0).
|
|
#
|
|
# @postcopy-bytes: The number of bytes sent during the post-copy phase
|
|
# (since 7.0).
|
|
#
|
|
# @dirty-sync-missed-zero-copy: Number of times dirty RAM
|
|
# synchronization could not avoid copying dirty pages. This is
|
|
# between 0 and @dirty-sync-count * @multifd-channels. (since
|
|
# 7.1)
|
|
#
|
|
# Since: 0.14
|
|
##
|
|
{ 'struct': 'MigrationStats',
|
|
'data': {'transferred': 'int', 'remaining': 'int', 'total': 'int' ,
|
|
'duplicate': 'int', 'skipped': 'int', 'normal': 'int',
|
|
'normal-bytes': 'int', 'dirty-pages-rate' : 'int',
|
|
'mbps' : 'number', 'dirty-sync-count' : 'int',
|
|
'postcopy-requests' : 'int', 'page-size' : 'int',
|
|
'multifd-bytes' : 'uint64', 'pages-per-second' : 'uint64',
|
|
'precopy-bytes' : 'uint64', 'downtime-bytes' : 'uint64',
|
|
'postcopy-bytes' : 'uint64',
|
|
'dirty-sync-missed-zero-copy' : 'uint64' } }
|
|
|
|
##
|
|
# @XBZRLECacheStats:
|
|
#
|
|
# Detailed XBZRLE migration cache statistics
|
|
#
|
|
# @cache-size: XBZRLE cache size
|
|
#
|
|
# @bytes: amount of bytes already transferred to the target VM
|
|
#
|
|
# @pages: amount of pages transferred to the target VM
|
|
#
|
|
# @cache-miss: number of cache miss
|
|
#
|
|
# @cache-miss-rate: rate of cache miss (since 2.1)
|
|
#
|
|
# @encoding-rate: rate of encoded bytes (since 5.1)
|
|
#
|
|
# @overflow: number of overflows
|
|
#
|
|
# Since: 1.2
|
|
##
|
|
{ 'struct': 'XBZRLECacheStats',
|
|
'data': {'cache-size': 'size', 'bytes': 'int', 'pages': 'int',
|
|
'cache-miss': 'int', 'cache-miss-rate': 'number',
|
|
'encoding-rate': 'number', 'overflow': 'int' } }
|
|
|
|
##
|
|
# @CompressionStats:
|
|
#
|
|
# Detailed migration compression statistics
|
|
#
|
|
# @pages: amount of pages compressed and transferred to the target VM
|
|
#
|
|
# @busy: count of times that no free thread was available to compress
|
|
# data
|
|
#
|
|
# @busy-rate: rate of thread busy
|
|
#
|
|
# @compressed-size: amount of bytes after compression
|
|
#
|
|
# @compression-rate: rate of compressed size
|
|
#
|
|
# Since: 3.1
|
|
##
|
|
{ 'struct': 'CompressionStats',
|
|
'data': {'pages': 'int', 'busy': 'int', 'busy-rate': 'number',
|
|
'compressed-size': 'int', 'compression-rate': 'number' } }
|
|
|
|
##
|
|
# @MigrationStatus:
|
|
#
|
|
# An enumeration of migration status.
|
|
#
|
|
# @none: no migration has ever happened.
|
|
#
|
|
# @setup: migration process has been initiated.
|
|
#
|
|
# @cancelling: in the process of cancelling migration.
|
|
#
|
|
# @cancelled: cancelling migration is finished.
|
|
#
|
|
# @active: in the process of doing migration.
|
|
#
|
|
# @postcopy-active: like active, but now in postcopy mode. (since
|
|
# 2.5)
|
|
#
|
|
# @postcopy-paused: during postcopy but paused. (since 3.0)
|
|
#
|
|
# @postcopy-recover: trying to recover from a paused postcopy. (since
|
|
# 3.0)
|
|
#
|
|
# @completed: migration is finished.
|
|
#
|
|
# @failed: some error occurred during migration process.
|
|
#
|
|
# @colo: VM is in the process of fault tolerance, VM can not get into
|
|
# this state unless colo capability is enabled for migration.
|
|
# (since 2.8)
|
|
#
|
|
# @pre-switchover: Paused before device serialisation. (since 2.11)
|
|
#
|
|
# @device: During device serialisation when pause-before-switchover is
|
|
# enabled (since 2.11)
|
|
#
|
|
# @wait-unplug: wait for device unplug request by guest OS to be
|
|
# completed. (since 4.2)
|
|
#
|
|
# Since: 2.3
|
|
##
|
|
{ 'enum': 'MigrationStatus',
|
|
'data': [ 'none', 'setup', 'cancelling', 'cancelled',
|
|
'active', 'postcopy-active', 'postcopy-paused',
|
|
'postcopy-recover', 'completed', 'failed', 'colo',
|
|
'pre-switchover', 'device', 'wait-unplug' ] }
|
|
##
|
|
# @VfioStats:
|
|
#
|
|
# Detailed VFIO devices migration statistics
|
|
#
|
|
# @transferred: amount of bytes transferred to the target VM by VFIO
|
|
# devices
|
|
#
|
|
# Since: 5.2
|
|
##
|
|
{ 'struct': 'VfioStats',
|
|
'data': {'transferred': 'int' } }
|
|
|
|
##
|
|
# @MigrationInfo:
|
|
#
|
|
# Information about current migration process.
|
|
#
|
|
# @status: @MigrationStatus describing the current migration status.
|
|
# If this field is not returned, no migration process has been
|
|
# initiated
|
|
#
|
|
# @ram: @MigrationStats containing detailed migration status, only
|
|
# returned if status is 'active' or 'completed'(since 1.2)
|
|
#
|
|
# @disk: @MigrationStats containing detailed disk migration status,
|
|
# only returned if status is 'active' and it is a block migration
|
|
#
|
|
# @xbzrle-cache: @XBZRLECacheStats containing detailed XBZRLE
|
|
# migration statistics, only returned if XBZRLE feature is on and
|
|
# status is 'active' or 'completed' (since 1.2)
|
|
#
|
|
# @total-time: total amount of milliseconds since migration started.
|
|
# If migration has ended, it returns the total migration time.
|
|
# (since 1.2)
|
|
#
|
|
# @downtime: only present when migration finishes correctly total
|
|
# downtime in milliseconds for the guest. (since 1.3)
|
|
#
|
|
# @expected-downtime: only present while migration is active expected
|
|
# downtime in milliseconds for the guest in last walk of the dirty
|
|
# bitmap. (since 1.3)
|
|
#
|
|
# @setup-time: amount of setup time in milliseconds *before* the
|
|
# iterations begin but *after* the QMP command is issued. This is
|
|
# designed to provide an accounting of any activities (such as
|
|
# RDMA pinning) which may be expensive, but do not actually occur
|
|
# during the iterative migration rounds themselves. (since 1.6)
|
|
#
|
|
# @cpu-throttle-percentage: percentage of time guest cpus are being
|
|
# throttled during auto-converge. This is only present when
|
|
# auto-converge has started throttling guest cpus. (Since 2.7)
|
|
#
|
|
# @error-desc: the human readable error description string, when
|
|
# @status is 'failed'. Clients should not attempt to parse the
|
|
# error strings. (Since 2.7)
|
|
#
|
|
# @postcopy-blocktime: total time when all vCPU were blocked during
|
|
# postcopy live migration. This is only present when the
|
|
# postcopy-blocktime migration capability is enabled. (Since 3.0)
|
|
#
|
|
# @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU.
|
|
# This is only present when the postcopy-blocktime migration
|
|
# capability is enabled. (Since 3.0)
|
|
#
|
|
# @compression: migration compression statistics, only returned if
|
|
# compression feature is on and status is 'active' or 'completed'
|
|
# (Since 3.1)
|
|
#
|
|
# @socket-address: Only used for tcp, to know what the real port is
|
|
# (Since 4.0)
|
|
#
|
|
# @vfio: @VfioStats containing detailed VFIO devices migration
|
|
# statistics, only returned if VFIO device is present, migration
|
|
# is supported by all VFIO devices and status is 'active' or
|
|
# 'completed' (since 5.2)
|
|
#
|
|
# @blocked-reasons: A list of reasons an outgoing migration is
|
|
# blocked. Present and non-empty when migration is blocked.
|
|
# (since 6.0)
|
|
#
|
|
# Since: 0.14
|
|
##
|
|
{ 'struct': 'MigrationInfo',
|
|
'data': {'*status': 'MigrationStatus', '*ram': 'MigrationStats',
|
|
'*disk': 'MigrationStats',
|
|
'*vfio': 'VfioStats',
|
|
'*xbzrle-cache': 'XBZRLECacheStats',
|
|
'*total-time': 'int',
|
|
'*expected-downtime': 'int',
|
|
'*downtime': 'int',
|
|
'*setup-time': 'int',
|
|
'*cpu-throttle-percentage': 'int',
|
|
'*error-desc': 'str',
|
|
'*blocked-reasons': ['str'],
|
|
'*postcopy-blocktime' : 'uint32',
|
|
'*postcopy-vcpu-blocktime': ['uint32'],
|
|
'*compression': 'CompressionStats',
|
|
'*socket-address': ['SocketAddress'] } }
|
|
|
|
##
|
|
# @query-migrate:
|
|
#
|
|
# Returns information about current migration process. If migration
|
|
# is active there will be another json-object with RAM migration
|
|
# status and if block migration is active another one with block
|
|
# migration status.
|
|
#
|
|
# Returns: @MigrationInfo
|
|
#
|
|
# Since: 0.14
|
|
#
|
|
# Examples:
|
|
#
|
|
# 1. Before the first migration
|
|
#
|
|
# -> { "execute": "query-migrate" }
|
|
# <- { "return": {} }
|
|
#
|
|
# 2. Migration is done and has succeeded
|
|
#
|
|
# -> { "execute": "query-migrate" }
|
|
# <- { "return": {
|
|
# "status": "completed",
|
|
# "total-time":12345,
|
|
# "setup-time":12345,
|
|
# "downtime":12345,
|
|
# "ram":{
|
|
# "transferred":123,
|
|
# "remaining":123,
|
|
# "total":246,
|
|
# "duplicate":123,
|
|
# "normal":123,
|
|
# "normal-bytes":123456,
|
|
# "dirty-sync-count":15
|
|
# }
|
|
# }
|
|
# }
|
|
#
|
|
# 3. Migration is done and has failed
|
|
#
|
|
# -> { "execute": "query-migrate" }
|
|
# <- { "return": { "status": "failed" } }
|
|
#
|
|
# 4. Migration is being performed and is not a block migration:
|
|
#
|
|
# -> { "execute": "query-migrate" }
|
|
# <- {
|
|
# "return":{
|
|
# "status":"active",
|
|
# "total-time":12345,
|
|
# "setup-time":12345,
|
|
# "expected-downtime":12345,
|
|
# "ram":{
|
|
# "transferred":123,
|
|
# "remaining":123,
|
|
# "total":246,
|
|
# "duplicate":123,
|
|
# "normal":123,
|
|
# "normal-bytes":123456,
|
|
# "dirty-sync-count":15
|
|
# }
|
|
# }
|
|
# }
|
|
#
|
|
# 5. Migration is being performed and is a block migration:
|
|
#
|
|
# -> { "execute": "query-migrate" }
|
|
# <- {
|
|
# "return":{
|
|
# "status":"active",
|
|
# "total-time":12345,
|
|
# "setup-time":12345,
|
|
# "expected-downtime":12345,
|
|
# "ram":{
|
|
# "total":1057024,
|
|
# "remaining":1053304,
|
|
# "transferred":3720,
|
|
# "duplicate":123,
|
|
# "normal":123,
|
|
# "normal-bytes":123456,
|
|
# "dirty-sync-count":15
|
|
# },
|
|
# "disk":{
|
|
# "total":20971520,
|
|
# "remaining":20880384,
|
|
# "transferred":91136
|
|
# }
|
|
# }
|
|
# }
|
|
#
|
|
# 6. Migration is being performed and XBZRLE is active:
|
|
#
|
|
# -> { "execute": "query-migrate" }
|
|
# <- {
|
|
# "return":{
|
|
# "status":"active",
|
|
# "total-time":12345,
|
|
# "setup-time":12345,
|
|
# "expected-downtime":12345,
|
|
# "ram":{
|
|
# "total":1057024,
|
|
# "remaining":1053304,
|
|
# "transferred":3720,
|
|
# "duplicate":10,
|
|
# "normal":3333,
|
|
# "normal-bytes":3412992,
|
|
# "dirty-sync-count":15
|
|
# },
|
|
# "xbzrle-cache":{
|
|
# "cache-size":67108864,
|
|
# "bytes":20971520,
|
|
# "pages":2444343,
|
|
# "cache-miss":2244,
|
|
# "cache-miss-rate":0.123,
|
|
# "encoding-rate":80.1,
|
|
# "overflow":34434
|
|
# }
|
|
# }
|
|
# }
|
|
##
|
|
{ 'command': 'query-migrate', 'returns': 'MigrationInfo' }
|
|
|
|
##
|
|
# @MigrationCapability:
|
|
#
|
|
# Migration capabilities enumeration
|
|
#
|
|
# @xbzrle: Migration supports xbzrle (Xor Based Zero Run Length
|
|
# Encoding). This feature allows us to minimize migration traffic
|
|
# for certain work loads, by sending compressed difference of the
|
|
# pages
|
|
#
|
|
# @rdma-pin-all: Controls whether or not the entire VM memory
|
|
# footprint is mlock()'d on demand or all at once. Refer to
|
|
# docs/rdma.txt for usage. Disabled by default. (since 2.0)
|
|
#
|
|
# @zero-blocks: During storage migration encode blocks of zeroes
|
|
# efficiently. This essentially saves 1MB of zeroes per block on
|
|
# the wire. Enabling requires source and target VM to support
|
|
# this feature. To enable it is sufficient to enable the
|
|
# capability on the source VM. The feature is disabled by default.
|
|
# (since 1.6)
|
|
#
|
|
# @compress: Use multiple compression threads to accelerate live
|
|
# migration. This feature can help to reduce the migration
|
|
# traffic, by sending compressed pages. Please note that if
|
|
# compress and xbzrle are both on, compress only takes effect in
|
|
# the ram bulk stage, after that, it will be disabled and only
|
|
# xbzrle takes effect, this can help to minimize migration
|
|
# traffic. The feature is disabled by default. (since 2.4 )
|
|
#
|
|
# @events: generate events for each migration state change (since 2.4
|
|
# )
|
|
#
|
|
# @auto-converge: If enabled, QEMU will automatically throttle down
|
|
# the guest to speed up convergence of RAM migration. (since 1.6)
|
|
#
|
|
# @postcopy-ram: Start executing on the migration target before all of
|
|
# RAM has been migrated, pulling the remaining pages along as
|
|
# needed. The capacity must have the same setting on both source
|
|
# and target or migration will not even start. NOTE: If the
|
|
# migration fails during postcopy the VM will fail. (since 2.6)
|
|
#
|
|
# @x-colo: If enabled, migration will never end, and the state of the
|
|
# VM on the primary side will be migrated continuously to the VM
|
|
# on secondary side, this process is called COarse-Grain LOck
|
|
# Stepping (COLO) for Non-stop Service. (since 2.8)
|
|
#
|
|
# @release-ram: if enabled, qemu will free the migrated ram pages on
|
|
# the source during postcopy-ram migration. (since 2.9)
|
|
#
|
|
# @block: If enabled, QEMU will also migrate the contents of all block
|
|
# devices. Default is disabled. A possible alternative uses
|
|
# mirror jobs to a builtin NBD server on the destination, which
|
|
# offers more flexibility. (Since 2.10)
|
|
#
|
|
# @return-path: If enabled, migration will use the return path even
|
|
# for precopy. (since 2.10)
|
|
#
|
|
# @pause-before-switchover: Pause outgoing migration before
|
|
# serialising device state and before disabling block IO (since
|
|
# 2.11)
|
|
#
|
|
# @multifd: Use more than one fd for migration (since 4.0)
|
|
#
|
|
# @dirty-bitmaps: If enabled, QEMU will migrate named dirty bitmaps.
|
|
# (since 2.12)
|
|
#
|
|
# @postcopy-blocktime: Calculate downtime for postcopy live migration
|
|
# (since 3.0)
|
|
#
|
|
# @late-block-activate: If enabled, the destination will not activate
|
|
# block devices (and thus take locks) immediately at the end of
|
|
# migration. (since 3.0)
|
|
#
|
|
# @x-ignore-shared: If enabled, QEMU will not migrate shared memory that is
|
|
# accessible on the destination machine. (since 4.0)
|
|
#
|
|
# @validate-uuid: Send the UUID of the source to allow the destination
|
|
# to ensure it is the same. (since 4.2)
|
|
#
|
|
# @background-snapshot: If enabled, the migration stream will be a
|
|
# snapshot of the VM exactly at the point when the migration
|
|
# procedure starts. The VM RAM is saved with running VM. (since
|
|
# 6.0)
|
|
#
|
|
# @zero-copy-send: Controls behavior on sending memory pages on
|
|
# migration. When true, enables a zero-copy mechanism for sending
|
|
# memory pages, if host supports it. Requires that QEMU be
|
|
# permitted to use locked memory for guest RAM pages. (since 7.1)
|
|
#
|
|
# @postcopy-preempt: If enabled, the migration process will allow
|
|
# postcopy requests to preempt precopy stream, so postcopy
|
|
# requests will be handled faster. This is a performance feature
|
|
# and should not affect the correctness of postcopy migration.
|
|
# (since 7.1)
|
|
#
|
|
# @switchover-ack: If enabled, migration will not stop the source VM
|
|
# and complete the migration until an ACK is received from the
|
|
# destination that it's OK to do so. Exactly when this ACK is
|
|
# sent depends on the migrated devices that use this feature.
|
|
# For example, a device can use it to make sure some of its data
|
|
# is sent and loaded in the destination before doing switchover.
|
|
# This can reduce downtime if devices that support this capability
|
|
# are present. 'return-path' capability must be enabled to use
|
|
# it. (since 8.1)
|
|
#
|
|
# Features:
|
|
#
|
|
# @unstable: Members @x-colo and @x-ignore-shared are experimental.
|
|
#
|
|
# Since: 1.2
|
|
##
|
|
{ 'enum': 'MigrationCapability',
|
|
'data': ['xbzrle', 'rdma-pin-all', 'auto-converge', 'zero-blocks',
|
|
'compress', 'events', 'postcopy-ram',
|
|
{ 'name': 'x-colo', 'features': [ 'unstable' ] },
|
|
'release-ram',
|
|
'block', 'return-path', 'pause-before-switchover', 'multifd',
|
|
'dirty-bitmaps', 'postcopy-blocktime', 'late-block-activate',
|
|
{ 'name': 'x-ignore-shared', 'features': [ 'unstable' ] },
|
|
'validate-uuid', 'background-snapshot',
|
|
'zero-copy-send', 'postcopy-preempt', 'switchover-ack'] }
|
|
|
|
##
|
|
# @MigrationCapabilityStatus:
|
|
#
|
|
# Migration capability information
|
|
#
|
|
# @capability: capability enum
|
|
#
|
|
# @state: capability state bool
|
|
#
|
|
# Since: 1.2
|
|
##
|
|
{ 'struct': 'MigrationCapabilityStatus',
|
|
'data': { 'capability' : 'MigrationCapability', 'state' : 'bool' } }
|
|
|
|
##
|
|
# @migrate-set-capabilities:
|
|
#
|
|
# Enable/Disable the following migration capabilities (like xbzrle)
|
|
#
|
|
# @capabilities: json array of capability modifications to make
|
|
#
|
|
# Since: 1.2
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate-set-capabilities" , "arguments":
|
|
# { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'migrate-set-capabilities',
|
|
'data': { 'capabilities': ['MigrationCapabilityStatus'] } }
|
|
|
|
##
|
|
# @query-migrate-capabilities:
|
|
#
|
|
# Returns information about the current migration capabilities status
|
|
#
|
|
# Returns: @MigrationCapabilityStatus
|
|
#
|
|
# Since: 1.2
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "query-migrate-capabilities" }
|
|
# <- { "return": [
|
|
# {"state": false, "capability": "xbzrle"},
|
|
# {"state": false, "capability": "rdma-pin-all"},
|
|
# {"state": false, "capability": "auto-converge"},
|
|
# {"state": false, "capability": "zero-blocks"},
|
|
# {"state": false, "capability": "compress"},
|
|
# {"state": true, "capability": "events"},
|
|
# {"state": false, "capability": "postcopy-ram"},
|
|
# {"state": false, "capability": "x-colo"}
|
|
# ]}
|
|
##
|
|
{ 'command': 'query-migrate-capabilities', 'returns': ['MigrationCapabilityStatus']}
|
|
|
|
##
|
|
# @MultiFDCompression:
|
|
#
|
|
# An enumeration of multifd compression methods.
|
|
#
|
|
# @none: no compression.
|
|
#
|
|
# @zlib: use zlib compression method.
|
|
#
|
|
# @zstd: use zstd compression method.
|
|
#
|
|
# Since: 5.0
|
|
##
|
|
{ 'enum': 'MultiFDCompression',
|
|
'data': [ 'none', 'zlib',
|
|
{ 'name': 'zstd', 'if': 'CONFIG_ZSTD' } ] }
|
|
|
|
##
|
|
# @BitmapMigrationBitmapAliasTransform:
|
|
#
|
|
# @persistent: If present, the bitmap will be made persistent or
|
|
# transient depending on this parameter.
|
|
#
|
|
# Since: 6.0
|
|
##
|
|
{ 'struct': 'BitmapMigrationBitmapAliasTransform',
|
|
'data': {
|
|
'*persistent': 'bool'
|
|
} }
|
|
|
|
##
|
|
# @BitmapMigrationBitmapAlias:
|
|
#
|
|
# @name: The name of the bitmap.
|
|
#
|
|
# @alias: An alias name for migration (for example the bitmap name on
|
|
# the opposite site).
|
|
#
|
|
# @transform: Allows the modification of the migrated bitmap. (since
|
|
# 6.0)
|
|
#
|
|
# Since: 5.2
|
|
##
|
|
{ 'struct': 'BitmapMigrationBitmapAlias',
|
|
'data': {
|
|
'name': 'str',
|
|
'alias': 'str',
|
|
'*transform': 'BitmapMigrationBitmapAliasTransform'
|
|
} }
|
|
|
|
##
|
|
# @BitmapMigrationNodeAlias:
|
|
#
|
|
# Maps a block node name and the bitmaps it has to aliases for dirty
|
|
# bitmap migration.
|
|
#
|
|
# @node-name: A block node name.
|
|
#
|
|
# @alias: An alias block node name for migration (for example the node
|
|
# name on the opposite site).
|
|
#
|
|
# @bitmaps: Mappings for the bitmaps on this node.
|
|
#
|
|
# Since: 5.2
|
|
##
|
|
{ 'struct': 'BitmapMigrationNodeAlias',
|
|
'data': {
|
|
'node-name': 'str',
|
|
'alias': 'str',
|
|
'bitmaps': [ 'BitmapMigrationBitmapAlias' ]
|
|
} }
|
|
|
|
##
|
|
# @MigrationParameter:
|
|
#
|
|
# Migration parameters enumeration
|
|
#
|
|
# @announce-initial: Initial delay (in milliseconds) before sending
|
|
# the first announce (Since 4.0)
|
|
#
|
|
# @announce-max: Maximum delay (in milliseconds) between packets in
|
|
# the announcement (Since 4.0)
|
|
#
|
|
# @announce-rounds: Number of self-announce packets sent after
|
|
# migration (Since 4.0)
|
|
#
|
|
# @announce-step: Increase in delay (in milliseconds) between
|
|
# subsequent packets in the announcement (Since 4.0)
|
|
#
|
|
# @compress-level: Set the compression level to be used in live
|
|
# migration, the compression level is an integer between 0 and 9,
|
|
# where 0 means no compression, 1 means the best compression
|
|
# speed, and 9 means best compression ratio which will consume
|
|
# more CPU.
|
|
#
|
|
# @compress-threads: Set compression thread count to be used in live
|
|
# migration, the compression thread count is an integer between 1
|
|
# and 255.
|
|
#
|
|
# @compress-wait-thread: Controls behavior when all compression
|
|
# threads are currently busy. If true (default), wait for a free
|
|
# compression thread to become available; otherwise, send the page
|
|
# uncompressed. (Since 3.1)
|
|
#
|
|
# @decompress-threads: Set decompression thread count to be used in
|
|
# live migration, the decompression thread count is an integer
|
|
# between 1 and 255. Usually, decompression is at least 4 times as
|
|
# fast as compression, so set the decompress-threads to the number
|
|
# about 1/4 of compress-threads is adequate.
|
|
#
|
|
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and
|
|
# bytes_xfer_period to trigger throttling. It is expressed as
|
|
# percentage. The default value is 50. (Since 5.0)
|
|
#
|
|
# @cpu-throttle-initial: Initial percentage of time guest cpus are
|
|
# throttled when migration auto-converge is activated. The
|
|
# default value is 20. (Since 2.7)
|
|
#
|
|
# @cpu-throttle-increment: throttle percentage increase each time
|
|
# auto-converge detects that migration is not making progress.
|
|
# The default value is 10. (Since 2.7)
|
|
#
|
|
# @cpu-throttle-tailslow: Make CPU throttling slower at tail stage At
|
|
# the tail stage of throttling, the Guest is very sensitive to CPU
|
|
# percentage while the @cpu-throttle -increment is excessive
|
|
# usually at tail stage. If this parameter is true, we will
|
|
# compute the ideal CPU percentage used by the Guest, which may
|
|
# exactly make the dirty rate match the dirty rate threshold.
|
|
# Then we will choose a smaller throttle increment between the one
|
|
# specified by @cpu-throttle-increment and the one generated by
|
|
# ideal CPU percentage. Therefore, it is compatible to
|
|
# traditional throttling, meanwhile the throttle increment won't
|
|
# be excessive at tail stage. The default value is false. (Since
|
|
# 5.1)
|
|
#
|
|
# @tls-creds: ID of the 'tls-creds' object that provides credentials
|
|
# for establishing a TLS connection over the migration data
|
|
# channel. On the outgoing side of the migration, the credentials
|
|
# must be for a 'client' endpoint, while for the incoming side the
|
|
# credentials must be for a 'server' endpoint. Setting this will
|
|
# enable TLS for all migrations. The default is unset, resulting
|
|
# in unsecured migration at the QEMU level. (Since 2.7)
|
|
#
|
|
# @tls-hostname: hostname of the target host for the migration. This
|
|
# is required when using x509 based TLS credentials and the
|
|
# migration URI does not already include a hostname. For example
|
|
# if using fd: or exec: based migration, the hostname must be
|
|
# provided so that the server's x509 certificate identity can be
|
|
# validated. (Since 2.7)
|
|
#
|
|
# @tls-authz: ID of the 'authz' object subclass that provides access
|
|
# control checking of the TLS x509 certificate distinguished name.
|
|
# This object is only resolved at time of use, so can be deleted
|
|
# and recreated on the fly while the migration server is active.
|
|
# If missing, it will default to denying access (Since 4.0)
|
|
#
|
|
# @max-bandwidth: to set maximum speed for migration. maximum speed
|
|
# in bytes per second. (Since 2.8)
|
|
#
|
|
# @downtime-limit: set maximum tolerated downtime for migration.
|
|
# maximum downtime in milliseconds (Since 2.8)
|
|
#
|
|
# @x-checkpoint-delay: The delay time (in ms) between two COLO
|
|
# checkpoints in periodic mode. (Since 2.8)
|
|
#
|
|
# @block-incremental: Affects how much storage is migrated when the
|
|
# block migration capability is enabled. When false, the entire
|
|
# storage backing chain is migrated into a flattened image at the
|
|
# destination; when true, only the active qcow2 layer is migrated
|
|
# and the destination must already have access to the same backing
|
|
# chain as was used on the source. (since 2.10)
|
|
#
|
|
# @multifd-channels: Number of channels used to migrate data in
|
|
# parallel. This is the same number that the number of sockets
|
|
# used for migration. The default value is 2 (since 4.0)
|
|
#
|
|
# @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
|
|
# needs to be a multiple of the target page size and a power of 2
|
|
# (Since 2.11)
|
|
#
|
|
# @max-postcopy-bandwidth: Background transfer bandwidth during
|
|
# postcopy. Defaults to 0 (unlimited). In bytes per second.
|
|
# (Since 3.0)
|
|
#
|
|
# @max-cpu-throttle: maximum cpu throttle percentage. Defaults to 99.
|
|
# (Since 3.1)
|
|
#
|
|
# @multifd-compression: Which compression method to use. Defaults to
|
|
# none. (Since 5.0)
|
|
#
|
|
# @multifd-zlib-level: Set the compression level to be used in live
|
|
# migration, the compression level is an integer between 0 and 9,
|
|
# where 0 means no compression, 1 means the best compression
|
|
# speed, and 9 means best compression ratio which will consume
|
|
# more CPU. Defaults to 1. (Since 5.0)
|
|
#
|
|
# @multifd-zstd-level: Set the compression level to be used in live
|
|
# migration, the compression level is an integer between 0 and 20,
|
|
# where 0 means no compression, 1 means the best compression
|
|
# speed, and 20 means best compression ratio which will consume
|
|
# more CPU. Defaults to 1. (Since 5.0)
|
|
#
|
|
# @block-bitmap-mapping: Maps block nodes and bitmaps on them to
|
|
# aliases for the purpose of dirty bitmap migration. Such aliases
|
|
# may for example be the corresponding names on the opposite site.
|
|
# The mapping must be one-to-one, but not necessarily complete: On
|
|
# the source, unmapped bitmaps and all bitmaps on unmapped nodes
|
|
# will be ignored. On the destination, encountering an unmapped
|
|
# alias in the incoming migration stream will result in a report,
|
|
# and all further bitmap migration data will then be discarded.
|
|
# Note that the destination does not know about bitmaps it does
|
|
# not receive, so there is no limitation or requirement regarding
|
|
# the number of bitmaps received, or how they are named, or on
|
|
# which nodes they are placed. By default (when this parameter
|
|
# has never been set), bitmap names are mapped to themselves.
|
|
# Nodes are mapped to their block device name if there is one, and
|
|
# to their node name otherwise. (Since 5.2)
|
|
#
|
|
# Features:
|
|
#
|
|
# @unstable: Member @x-checkpoint-delay is experimental.
|
|
#
|
|
# Since: 2.4
|
|
##
|
|
{ 'enum': 'MigrationParameter',
|
|
'data': ['announce-initial', 'announce-max',
|
|
'announce-rounds', 'announce-step',
|
|
'compress-level', 'compress-threads', 'decompress-threads',
|
|
'compress-wait-thread', 'throttle-trigger-threshold',
|
|
'cpu-throttle-initial', 'cpu-throttle-increment',
|
|
'cpu-throttle-tailslow',
|
|
'tls-creds', 'tls-hostname', 'tls-authz', 'max-bandwidth',
|
|
'downtime-limit',
|
|
{ 'name': 'x-checkpoint-delay', 'features': [ 'unstable' ] },
|
|
'block-incremental',
|
|
'multifd-channels',
|
|
'xbzrle-cache-size', 'max-postcopy-bandwidth',
|
|
'max-cpu-throttle', 'multifd-compression',
|
|
'multifd-zlib-level' ,'multifd-zstd-level',
|
|
'block-bitmap-mapping' ] }
|
|
|
|
##
|
|
# @MigrateSetParameters:
|
|
#
|
|
# @announce-initial: Initial delay (in milliseconds) before sending
|
|
# the first announce (Since 4.0)
|
|
#
|
|
# @announce-max: Maximum delay (in milliseconds) between packets in
|
|
# the announcement (Since 4.0)
|
|
#
|
|
# @announce-rounds: Number of self-announce packets sent after
|
|
# migration (Since 4.0)
|
|
#
|
|
# @announce-step: Increase in delay (in milliseconds) between
|
|
# subsequent packets in the announcement (Since 4.0)
|
|
#
|
|
# @compress-level: compression level
|
|
#
|
|
# @compress-threads: compression thread count
|
|
#
|
|
# @compress-wait-thread: Controls behavior when all compression
|
|
# threads are currently busy. If true (default), wait for a free
|
|
# compression thread to become available; otherwise, send the page
|
|
# uncompressed. (Since 3.1)
|
|
#
|
|
# @decompress-threads: decompression thread count
|
|
#
|
|
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and
|
|
# bytes_xfer_period to trigger throttling. It is expressed as
|
|
# percentage. The default value is 50. (Since 5.0)
|
|
#
|
|
# @cpu-throttle-initial: Initial percentage of time guest cpus are
|
|
# throttled when migration auto-converge is activated. The
|
|
# default value is 20. (Since 2.7)
|
|
#
|
|
# @cpu-throttle-increment: throttle percentage increase each time
|
|
# auto-converge detects that migration is not making progress.
|
|
# The default value is 10. (Since 2.7)
|
|
#
|
|
# @cpu-throttle-tailslow: Make CPU throttling slower at tail stage At
|
|
# the tail stage of throttling, the Guest is very sensitive to CPU
|
|
# percentage while the @cpu-throttle -increment is excessive
|
|
# usually at tail stage. If this parameter is true, we will
|
|
# compute the ideal CPU percentage used by the Guest, which may
|
|
# exactly make the dirty rate match the dirty rate threshold.
|
|
# Then we will choose a smaller throttle increment between the one
|
|
# specified by @cpu-throttle-increment and the one generated by
|
|
# ideal CPU percentage. Therefore, it is compatible to
|
|
# traditional throttling, meanwhile the throttle increment won't
|
|
# be excessive at tail stage. The default value is false. (Since
|
|
# 5.1)
|
|
#
|
|
# @tls-creds: ID of the 'tls-creds' object that provides credentials
|
|
# for establishing a TLS connection over the migration data
|
|
# channel. On the outgoing side of the migration, the credentials
|
|
# must be for a 'client' endpoint, while for the incoming side the
|
|
# credentials must be for a 'server' endpoint. Setting this to a
|
|
# non-empty string enables TLS for all migrations. An empty
|
|
# string means that QEMU will use plain text mode for migration,
|
|
# rather than TLS (Since 2.9) Previously (since 2.7), this was
|
|
# reported by omitting tls-creds instead.
|
|
#
|
|
# @tls-hostname: hostname of the target host for the migration. This
|
|
# is required when using x509 based TLS credentials and the
|
|
# migration URI does not already include a hostname. For example
|
|
# if using fd: or exec: based migration, the hostname must be
|
|
# provided so that the server's x509 certificate identity can be
|
|
# validated. (Since 2.7) An empty string means that QEMU will use
|
|
# the hostname associated with the migration URI, if any. (Since
|
|
# 2.9) Previously (since 2.7), this was reported by omitting
|
|
# tls-hostname instead.
|
|
#
|
|
# @max-bandwidth: to set maximum speed for migration. maximum speed
|
|
# in bytes per second. (Since 2.8)
|
|
#
|
|
# @downtime-limit: set maximum tolerated downtime for migration.
|
|
# maximum downtime in milliseconds (Since 2.8)
|
|
#
|
|
# @x-checkpoint-delay: the delay time between two COLO checkpoints.
|
|
# (Since 2.8)
|
|
#
|
|
# @block-incremental: Affects how much storage is migrated when the
|
|
# block migration capability is enabled. When false, the entire
|
|
# storage backing chain is migrated into a flattened image at the
|
|
# destination; when true, only the active qcow2 layer is migrated
|
|
# and the destination must already have access to the same backing
|
|
# chain as was used on the source. (since 2.10)
|
|
#
|
|
# @multifd-channels: Number of channels used to migrate data in
|
|
# parallel. This is the same number that the number of sockets
|
|
# used for migration. The default value is 2 (since 4.0)
|
|
#
|
|
# @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
|
|
# needs to be a multiple of the target page size and a power of 2
|
|
# (Since 2.11)
|
|
#
|
|
# @max-postcopy-bandwidth: Background transfer bandwidth during
|
|
# postcopy. Defaults to 0 (unlimited). In bytes per second.
|
|
# (Since 3.0)
|
|
#
|
|
# @max-cpu-throttle: maximum cpu throttle percentage. The default
|
|
# value is 99. (Since 3.1)
|
|
#
|
|
# @multifd-compression: Which compression method to use. Defaults to
|
|
# none. (Since 5.0)
|
|
#
|
|
# @multifd-zlib-level: Set the compression level to be used in live
|
|
# migration, the compression level is an integer between 0 and 9,
|
|
# where 0 means no compression, 1 means the best compression
|
|
# speed, and 9 means best compression ratio which will consume
|
|
# more CPU. Defaults to 1. (Since 5.0)
|
|
#
|
|
# @multifd-zstd-level: Set the compression level to be used in live
|
|
# migration, the compression level is an integer between 0 and 20,
|
|
# where 0 means no compression, 1 means the best compression
|
|
# speed, and 20 means best compression ratio which will consume
|
|
# more CPU. Defaults to 1. (Since 5.0)
|
|
#
|
|
# @block-bitmap-mapping: Maps block nodes and bitmaps on them to
|
|
# aliases for the purpose of dirty bitmap migration. Such aliases
|
|
# may for example be the corresponding names on the opposite site.
|
|
# The mapping must be one-to-one, but not necessarily complete: On
|
|
# the source, unmapped bitmaps and all bitmaps on unmapped nodes
|
|
# will be ignored. On the destination, encountering an unmapped
|
|
# alias in the incoming migration stream will result in a report,
|
|
# and all further bitmap migration data will then be discarded.
|
|
# Note that the destination does not know about bitmaps it does
|
|
# not receive, so there is no limitation or requirement regarding
|
|
# the number of bitmaps received, or how they are named, or on
|
|
# which nodes they are placed. By default (when this parameter
|
|
# has never been set), bitmap names are mapped to themselves.
|
|
# Nodes are mapped to their block device name if there is one, and
|
|
# to their node name otherwise. (Since 5.2)
|
|
#
|
|
# Features:
|
|
#
|
|
# @unstable: Member @x-checkpoint-delay is experimental.
|
|
#
|
|
# TODO: either fuse back into MigrationParameters, or make
|
|
# MigrationParameters members mandatory
|
|
#
|
|
# Since: 2.4
|
|
##
|
|
{ 'struct': 'MigrateSetParameters',
|
|
'data': { '*announce-initial': 'size',
|
|
'*announce-max': 'size',
|
|
'*announce-rounds': 'size',
|
|
'*announce-step': 'size',
|
|
'*compress-level': 'uint8',
|
|
'*compress-threads': 'uint8',
|
|
'*compress-wait-thread': 'bool',
|
|
'*decompress-threads': 'uint8',
|
|
'*throttle-trigger-threshold': 'uint8',
|
|
'*cpu-throttle-initial': 'uint8',
|
|
'*cpu-throttle-increment': 'uint8',
|
|
'*cpu-throttle-tailslow': 'bool',
|
|
'*tls-creds': 'StrOrNull',
|
|
'*tls-hostname': 'StrOrNull',
|
|
'*tls-authz': 'StrOrNull',
|
|
'*max-bandwidth': 'size',
|
|
'*downtime-limit': 'uint64',
|
|
'*x-checkpoint-delay': { 'type': 'uint32',
|
|
'features': [ 'unstable' ] },
|
|
'*block-incremental': 'bool',
|
|
'*multifd-channels': 'uint8',
|
|
'*xbzrle-cache-size': 'size',
|
|
'*max-postcopy-bandwidth': 'size',
|
|
'*max-cpu-throttle': 'uint8',
|
|
'*multifd-compression': 'MultiFDCompression',
|
|
'*multifd-zlib-level': 'uint8',
|
|
'*multifd-zstd-level': 'uint8',
|
|
'*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
|
|
|
|
##
|
|
# @migrate-set-parameters:
|
|
#
|
|
# Set various migration parameters.
|
|
#
|
|
# Since: 2.4
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate-set-parameters" ,
|
|
# "arguments": { "compress-level": 1 } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'migrate-set-parameters', 'boxed': true,
|
|
'data': 'MigrateSetParameters' }
|
|
|
|
##
|
|
# @MigrationParameters:
|
|
#
|
|
# The optional members aren't actually optional.
|
|
#
|
|
# @announce-initial: Initial delay (in milliseconds) before sending
|
|
# the first announce (Since 4.0)
|
|
#
|
|
# @announce-max: Maximum delay (in milliseconds) between packets in
|
|
# the announcement (Since 4.0)
|
|
#
|
|
# @announce-rounds: Number of self-announce packets sent after
|
|
# migration (Since 4.0)
|
|
#
|
|
# @announce-step: Increase in delay (in milliseconds) between
|
|
# subsequent packets in the announcement (Since 4.0)
|
|
#
|
|
# @compress-level: compression level
|
|
#
|
|
# @compress-threads: compression thread count
|
|
#
|
|
# @compress-wait-thread: Controls behavior when all compression
|
|
# threads are currently busy. If true (default), wait for a free
|
|
# compression thread to become available; otherwise, send the page
|
|
# uncompressed. (Since 3.1)
|
|
#
|
|
# @decompress-threads: decompression thread count
|
|
#
|
|
# @throttle-trigger-threshold: The ratio of bytes_dirty_period and
|
|
# bytes_xfer_period to trigger throttling. It is expressed as
|
|
# percentage. The default value is 50. (Since 5.0)
|
|
#
|
|
# @cpu-throttle-initial: Initial percentage of time guest cpus are
|
|
# throttled when migration auto-converge is activated. (Since
|
|
# 2.7)
|
|
#
|
|
# @cpu-throttle-increment: throttle percentage increase each time
|
|
# auto-converge detects that migration is not making progress.
|
|
# (Since 2.7)
|
|
#
|
|
# @cpu-throttle-tailslow: Make CPU throttling slower at tail stage At
|
|
# the tail stage of throttling, the Guest is very sensitive to CPU
|
|
# percentage while the @cpu-throttle -increment is excessive
|
|
# usually at tail stage. If this parameter is true, we will
|
|
# compute the ideal CPU percentage used by the Guest, which may
|
|
# exactly make the dirty rate match the dirty rate threshold.
|
|
# Then we will choose a smaller throttle increment between the one
|
|
# specified by @cpu-throttle-increment and the one generated by
|
|
# ideal CPU percentage. Therefore, it is compatible to
|
|
# traditional throttling, meanwhile the throttle increment won't
|
|
# be excessive at tail stage. The default value is false. (Since
|
|
# 5.1)
|
|
#
|
|
# @tls-creds: ID of the 'tls-creds' object that provides credentials
|
|
# for establishing a TLS connection over the migration data
|
|
# channel. On the outgoing side of the migration, the credentials
|
|
# must be for a 'client' endpoint, while for the incoming side the
|
|
# credentials must be for a 'server' endpoint. An empty string
|
|
# means that QEMU will use plain text mode for migration, rather
|
|
# than TLS (Since 2.7) Note: 2.8 reports this by omitting
|
|
# tls-creds instead.
|
|
#
|
|
# @tls-hostname: hostname of the target host for the migration. This
|
|
# is required when using x509 based TLS credentials and the
|
|
# migration URI does not already include a hostname. For example
|
|
# if using fd: or exec: based migration, the hostname must be
|
|
# provided so that the server's x509 certificate identity can be
|
|
# validated. (Since 2.7) An empty string means that QEMU will use
|
|
# the hostname associated with the migration URI, if any. (Since
|
|
# 2.9) Note: 2.8 reports this by omitting tls-hostname instead.
|
|
#
|
|
# @tls-authz: ID of the 'authz' object subclass that provides access
|
|
# control checking of the TLS x509 certificate distinguished name.
|
|
# (Since 4.0)
|
|
#
|
|
# @max-bandwidth: to set maximum speed for migration. maximum speed
|
|
# in bytes per second. (Since 2.8)
|
|
#
|
|
# @downtime-limit: set maximum tolerated downtime for migration.
|
|
# maximum downtime in milliseconds (Since 2.8)
|
|
#
|
|
# @x-checkpoint-delay: the delay time between two COLO checkpoints.
|
|
# (Since 2.8)
|
|
#
|
|
# @block-incremental: Affects how much storage is migrated when the
|
|
# block migration capability is enabled. When false, the entire
|
|
# storage backing chain is migrated into a flattened image at the
|
|
# destination; when true, only the active qcow2 layer is migrated
|
|
# and the destination must already have access to the same backing
|
|
# chain as was used on the source. (since 2.10)
|
|
#
|
|
# @multifd-channels: Number of channels used to migrate data in
|
|
# parallel. This is the same number that the number of sockets
|
|
# used for migration. The default value is 2 (since 4.0)
|
|
#
|
|
# @xbzrle-cache-size: cache size to be used by XBZRLE migration. It
|
|
# needs to be a multiple of the target page size and a power of 2
|
|
# (Since 2.11)
|
|
#
|
|
# @max-postcopy-bandwidth: Background transfer bandwidth during
|
|
# postcopy. Defaults to 0 (unlimited). In bytes per second.
|
|
# (Since 3.0)
|
|
#
|
|
# @max-cpu-throttle: maximum cpu throttle percentage. Defaults to 99.
|
|
# (Since 3.1)
|
|
#
|
|
# @multifd-compression: Which compression method to use. Defaults to
|
|
# none. (Since 5.0)
|
|
#
|
|
# @multifd-zlib-level: Set the compression level to be used in live
|
|
# migration, the compression level is an integer between 0 and 9,
|
|
# where 0 means no compression, 1 means the best compression
|
|
# speed, and 9 means best compression ratio which will consume
|
|
# more CPU. Defaults to 1. (Since 5.0)
|
|
#
|
|
# @multifd-zstd-level: Set the compression level to be used in live
|
|
# migration, the compression level is an integer between 0 and 20,
|
|
# where 0 means no compression, 1 means the best compression
|
|
# speed, and 20 means best compression ratio which will consume
|
|
# more CPU. Defaults to 1. (Since 5.0)
|
|
#
|
|
# @block-bitmap-mapping: Maps block nodes and bitmaps on them to
|
|
# aliases for the purpose of dirty bitmap migration. Such aliases
|
|
# may for example be the corresponding names on the opposite site.
|
|
# The mapping must be one-to-one, but not necessarily complete: On
|
|
# the source, unmapped bitmaps and all bitmaps on unmapped nodes
|
|
# will be ignored. On the destination, encountering an unmapped
|
|
# alias in the incoming migration stream will result in a report,
|
|
# and all further bitmap migration data will then be discarded.
|
|
# Note that the destination does not know about bitmaps it does
|
|
# not receive, so there is no limitation or requirement regarding
|
|
# the number of bitmaps received, or how they are named, or on
|
|
# which nodes they are placed. By default (when this parameter
|
|
# has never been set), bitmap names are mapped to themselves.
|
|
# Nodes are mapped to their block device name if there is one, and
|
|
# to their node name otherwise. (Since 5.2)
|
|
#
|
|
# Features:
|
|
#
|
|
# @unstable: Member @x-checkpoint-delay is experimental.
|
|
#
|
|
# Since: 2.4
|
|
##
|
|
{ 'struct': 'MigrationParameters',
|
|
'data': { '*announce-initial': 'size',
|
|
'*announce-max': 'size',
|
|
'*announce-rounds': 'size',
|
|
'*announce-step': 'size',
|
|
'*compress-level': 'uint8',
|
|
'*compress-threads': 'uint8',
|
|
'*compress-wait-thread': 'bool',
|
|
'*decompress-threads': 'uint8',
|
|
'*throttle-trigger-threshold': 'uint8',
|
|
'*cpu-throttle-initial': 'uint8',
|
|
'*cpu-throttle-increment': 'uint8',
|
|
'*cpu-throttle-tailslow': 'bool',
|
|
'*tls-creds': 'str',
|
|
'*tls-hostname': 'str',
|
|
'*tls-authz': 'str',
|
|
'*max-bandwidth': 'size',
|
|
'*downtime-limit': 'uint64',
|
|
'*x-checkpoint-delay': { 'type': 'uint32',
|
|
'features': [ 'unstable' ] },
|
|
'*block-incremental': 'bool',
|
|
'*multifd-channels': 'uint8',
|
|
'*xbzrle-cache-size': 'size',
|
|
'*max-postcopy-bandwidth': 'size',
|
|
'*max-cpu-throttle': 'uint8',
|
|
'*multifd-compression': 'MultiFDCompression',
|
|
'*multifd-zlib-level': 'uint8',
|
|
'*multifd-zstd-level': 'uint8',
|
|
'*block-bitmap-mapping': [ 'BitmapMigrationNodeAlias' ] } }
|
|
|
|
##
|
|
# @query-migrate-parameters:
|
|
#
|
|
# Returns information about the current migration parameters
|
|
#
|
|
# Returns: @MigrationParameters
|
|
#
|
|
# Since: 2.4
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "query-migrate-parameters" }
|
|
# <- { "return": {
|
|
# "decompress-threads": 2,
|
|
# "cpu-throttle-increment": 10,
|
|
# "compress-threads": 8,
|
|
# "compress-level": 1,
|
|
# "cpu-throttle-initial": 20,
|
|
# "max-bandwidth": 33554432,
|
|
# "downtime-limit": 300
|
|
# }
|
|
# }
|
|
##
|
|
{ 'command': 'query-migrate-parameters',
|
|
'returns': 'MigrationParameters' }
|
|
|
|
##
|
|
# @migrate-start-postcopy:
|
|
#
|
|
# Followup to a migration command to switch the migration to postcopy
|
|
# mode. The postcopy-ram capability must be set on both source and
|
|
# destination before the original migration command.
|
|
#
|
|
# Since: 2.5
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate-start-postcopy" }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'migrate-start-postcopy' }
|
|
|
|
##
|
|
# @MIGRATION:
|
|
#
|
|
# Emitted when a migration event happens
|
|
#
|
|
# @status: @MigrationStatus describing the current migration status.
|
|
#
|
|
# Since: 2.4
|
|
#
|
|
# Example:
|
|
#
|
|
# <- {"timestamp": {"seconds": 1432121972, "microseconds": 744001},
|
|
# "event": "MIGRATION",
|
|
# "data": {"status": "completed"} }
|
|
##
|
|
{ 'event': 'MIGRATION',
|
|
'data': {'status': 'MigrationStatus'}}
|
|
|
|
##
|
|
# @MIGRATION_PASS:
|
|
#
|
|
# Emitted from the source side of a migration at the start of each
|
|
# pass (when it syncs the dirty bitmap)
|
|
#
|
|
# @pass: An incrementing count (starting at 1 on the first pass)
|
|
#
|
|
# Since: 2.6
|
|
#
|
|
# Example:
|
|
#
|
|
# <- { "timestamp": {"seconds": 1449669631, "microseconds": 239225},
|
|
# "event": "MIGRATION_PASS", "data": {"pass": 2} }
|
|
##
|
|
{ 'event': 'MIGRATION_PASS',
|
|
'data': { 'pass': 'int' } }
|
|
|
|
##
|
|
# @COLOMessage:
|
|
#
|
|
# The message transmission between Primary side and Secondary side.
|
|
#
|
|
# @checkpoint-ready: Secondary VM (SVM) is ready for checkpointing
|
|
#
|
|
# @checkpoint-request: Primary VM (PVM) tells SVM to prepare for
|
|
# checkpointing
|
|
#
|
|
# @checkpoint-reply: SVM gets PVM's checkpoint request
|
|
#
|
|
# @vmstate-send: VM's state will be sent by PVM.
|
|
#
|
|
# @vmstate-size: The total size of VMstate.
|
|
#
|
|
# @vmstate-received: VM's state has been received by SVM.
|
|
#
|
|
# @vmstate-loaded: VM's state has been loaded by SVM.
|
|
#
|
|
# Since: 2.8
|
|
##
|
|
{ 'enum': 'COLOMessage',
|
|
'data': [ 'checkpoint-ready', 'checkpoint-request', 'checkpoint-reply',
|
|
'vmstate-send', 'vmstate-size', 'vmstate-received',
|
|
'vmstate-loaded' ] }
|
|
|
|
##
|
|
# @COLOMode:
|
|
#
|
|
# The COLO current mode.
|
|
#
|
|
# @none: COLO is disabled.
|
|
#
|
|
# @primary: COLO node in primary side.
|
|
#
|
|
# @secondary: COLO node in slave side.
|
|
#
|
|
# Since: 2.8
|
|
##
|
|
{ 'enum': 'COLOMode',
|
|
'data': [ 'none', 'primary', 'secondary'] }
|
|
|
|
##
|
|
# @FailoverStatus:
|
|
#
|
|
# An enumeration of COLO failover status
|
|
#
|
|
# @none: no failover has ever happened
|
|
#
|
|
# @require: got failover requirement but not handled
|
|
#
|
|
# @active: in the process of doing failover
|
|
#
|
|
# @completed: finish the process of failover
|
|
#
|
|
# @relaunch: restart the failover process, from 'none' -> 'completed'
|
|
# (Since 2.9)
|
|
#
|
|
# Since: 2.8
|
|
##
|
|
{ 'enum': 'FailoverStatus',
|
|
'data': [ 'none', 'require', 'active', 'completed', 'relaunch' ] }
|
|
|
|
##
|
|
# @COLO_EXIT:
|
|
#
|
|
# Emitted when VM finishes COLO mode due to some errors happening or
|
|
# at the request of users.
|
|
#
|
|
# @mode: report COLO mode when COLO exited.
|
|
#
|
|
# @reason: describes the reason for the COLO exit.
|
|
#
|
|
# Since: 3.1
|
|
#
|
|
# Example:
|
|
#
|
|
# <- { "timestamp": {"seconds": 2032141960, "microseconds": 417172},
|
|
# "event": "COLO_EXIT", "data": {"mode": "primary", "reason": "request" } }
|
|
##
|
|
{ 'event': 'COLO_EXIT',
|
|
'data': {'mode': 'COLOMode', 'reason': 'COLOExitReason' } }
|
|
|
|
##
|
|
# @COLOExitReason:
|
|
#
|
|
# The reason for a COLO exit.
|
|
#
|
|
# @none: failover has never happened. This state does not occur in
|
|
# the COLO_EXIT event, and is only visible in the result of
|
|
# query-colo-status.
|
|
#
|
|
# @request: COLO exit is due to an external request.
|
|
#
|
|
# @error: COLO exit is due to an internal error.
|
|
#
|
|
# @processing: COLO is currently handling a failover (since 4.0).
|
|
#
|
|
# Since: 3.1
|
|
##
|
|
{ 'enum': 'COLOExitReason',
|
|
'data': [ 'none', 'request', 'error' , 'processing' ] }
|
|
|
|
##
|
|
# @x-colo-lost-heartbeat:
|
|
#
|
|
# Tell qemu that heartbeat is lost, request it to do takeover
|
|
# procedures. If this command is sent to the PVM, the Primary side
|
|
# will exit COLO mode. If sent to the Secondary, the Secondary side
|
|
# will run failover work, then takes over server operation to become
|
|
# the service VM.
|
|
#
|
|
# Features:
|
|
#
|
|
# @unstable: This command is experimental.
|
|
#
|
|
# Since: 2.8
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "x-colo-lost-heartbeat" }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'x-colo-lost-heartbeat',
|
|
'features': [ 'unstable' ],
|
|
'if': 'CONFIG_REPLICATION' }
|
|
|
|
##
|
|
# @migrate_cancel:
|
|
#
|
|
# Cancel the current executing migration process.
|
|
#
|
|
# Returns: nothing on success
|
|
#
|
|
# Notes: This command succeeds even if there is no migration process
|
|
# running.
|
|
#
|
|
# Since: 0.14
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate_cancel" }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'migrate_cancel' }
|
|
|
|
##
|
|
# @migrate-continue:
|
|
#
|
|
# Continue migration when it's in a paused state.
|
|
#
|
|
# @state: The state the migration is currently expected to be in
|
|
#
|
|
# Returns: nothing on success
|
|
#
|
|
# Since: 2.11
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate-continue" , "arguments":
|
|
# { "state": "pre-switchover" } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'migrate-continue', 'data': {'state': 'MigrationStatus'} }
|
|
|
|
##
|
|
# @migrate:
|
|
#
|
|
# Migrates the current running guest to another Virtual Machine.
|
|
#
|
|
# @uri: the Uniform Resource Identifier of the destination VM
|
|
#
|
|
# @blk: do block migration (full disk copy)
|
|
#
|
|
# @inc: incremental disk copy migration
|
|
#
|
|
# @detach: this argument exists only for compatibility reasons and is
|
|
# ignored by QEMU
|
|
#
|
|
# @resume: resume one paused migration, default "off". (since 3.0)
|
|
#
|
|
# Returns: nothing on success
|
|
#
|
|
# Since: 0.14
|
|
#
|
|
# Notes:
|
|
#
|
|
# 1. The 'query-migrate' command should be used to check migration's
|
|
# progress and final result (this information is provided by the
|
|
# 'status' member)
|
|
#
|
|
# 2. All boolean arguments default to false
|
|
#
|
|
# 3. The user Monitor's "detach" argument is invalid in QMP and should
|
|
# not be used
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'migrate',
|
|
'data': {'uri': 'str', '*blk': 'bool', '*inc': 'bool',
|
|
'*detach': 'bool', '*resume': 'bool' } }
|
|
|
|
##
|
|
# @migrate-incoming:
|
|
#
|
|
# Start an incoming migration, the qemu must have been started with
|
|
# -incoming defer
|
|
#
|
|
# @uri: The Uniform Resource Identifier identifying the source or
|
|
# address to listen on
|
|
#
|
|
# Returns: nothing on success
|
|
#
|
|
# Since: 2.3
|
|
#
|
|
# Notes:
|
|
#
|
|
# 1. It's a bad idea to use a string for the uri, but it needs
|
|
# to stay compatible with -incoming and the format of the uri
|
|
# is already exposed above libvirt.
|
|
#
|
|
# 2. QEMU must be started with -incoming defer to allow
|
|
# migrate-incoming to be used.
|
|
#
|
|
# 3. The uri format is the same as for -incoming
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate-incoming",
|
|
# "arguments": { "uri": "tcp::4446" } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'migrate-incoming', 'data': {'uri': 'str' } }
|
|
|
|
##
|
|
# @xen-save-devices-state:
|
|
#
|
|
# Save the state of all devices to file. The RAM and the block
|
|
# devices of the VM are not saved by this command.
|
|
#
|
|
# @filename: the file to save the state of the devices to as binary
|
|
# data. See xen-save-devices-state.txt for a description of the
|
|
# binary format.
|
|
#
|
|
# @live: Optional argument to ask QEMU to treat this command as part
|
|
# of a live migration. Default to true. (since 2.11)
|
|
#
|
|
# Returns: Nothing on success
|
|
#
|
|
# Since: 1.1
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "xen-save-devices-state",
|
|
# "arguments": { "filename": "/tmp/save" } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'xen-save-devices-state',
|
|
'data': {'filename': 'str', '*live':'bool' } }
|
|
|
|
##
|
|
# @xen-set-global-dirty-log:
|
|
#
|
|
# Enable or disable the global dirty log mode.
|
|
#
|
|
# @enable: true to enable, false to disable.
|
|
#
|
|
# Returns: nothing
|
|
#
|
|
# Since: 1.3
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "xen-set-global-dirty-log",
|
|
# "arguments": { "enable": true } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'xen-set-global-dirty-log', 'data': { 'enable': 'bool' } }
|
|
|
|
##
|
|
# @xen-load-devices-state:
|
|
#
|
|
# Load the state of all devices from file. The RAM and the block
|
|
# devices of the VM are not loaded by this command.
|
|
#
|
|
# @filename: the file to load the state of the devices from as binary
|
|
# data. See xen-save-devices-state.txt for a description of the
|
|
# binary format.
|
|
#
|
|
# Since: 2.7
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "xen-load-devices-state",
|
|
# "arguments": { "filename": "/tmp/resume" } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'xen-load-devices-state', 'data': {'filename': 'str'} }
|
|
|
|
##
|
|
# @xen-set-replication:
|
|
#
|
|
# Enable or disable replication.
|
|
#
|
|
# @enable: true to enable, false to disable.
|
|
#
|
|
# @primary: true for primary or false for secondary.
|
|
#
|
|
# @failover: true to do failover, false to stop. but cannot be
|
|
# specified if 'enable' is true. default value is false.
|
|
#
|
|
# Returns: nothing.
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "xen-set-replication",
|
|
# "arguments": {"enable": true, "primary": false} }
|
|
# <- { "return": {} }
|
|
#
|
|
# Since: 2.9
|
|
##
|
|
{ 'command': 'xen-set-replication',
|
|
'data': { 'enable': 'bool', 'primary': 'bool', '*failover' : 'bool' },
|
|
'if': 'CONFIG_REPLICATION' }
|
|
|
|
##
|
|
# @ReplicationStatus:
|
|
#
|
|
# The result format for 'query-xen-replication-status'.
|
|
#
|
|
# @error: true if an error happened, false if replication is normal.
|
|
#
|
|
# @desc: the human readable error description string, when @error is
|
|
# 'true'.
|
|
#
|
|
# Since: 2.9
|
|
##
|
|
{ 'struct': 'ReplicationStatus',
|
|
'data': { 'error': 'bool', '*desc': 'str' },
|
|
'if': 'CONFIG_REPLICATION' }
|
|
|
|
##
|
|
# @query-xen-replication-status:
|
|
#
|
|
# Query replication status while the vm is running.
|
|
#
|
|
# Returns: A @ReplicationStatus object showing the status.
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "query-xen-replication-status" }
|
|
# <- { "return": { "error": false } }
|
|
#
|
|
# Since: 2.9
|
|
##
|
|
{ 'command': 'query-xen-replication-status',
|
|
'returns': 'ReplicationStatus',
|
|
'if': 'CONFIG_REPLICATION' }
|
|
|
|
##
|
|
# @xen-colo-do-checkpoint:
|
|
#
|
|
# Xen uses this command to notify replication to trigger a checkpoint.
|
|
#
|
|
# Returns: nothing.
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "xen-colo-do-checkpoint" }
|
|
# <- { "return": {} }
|
|
#
|
|
# Since: 2.9
|
|
##
|
|
{ 'command': 'xen-colo-do-checkpoint',
|
|
'if': 'CONFIG_REPLICATION' }
|
|
|
|
##
|
|
# @COLOStatus:
|
|
#
|
|
# The result format for 'query-colo-status'.
|
|
#
|
|
# @mode: COLO running mode. If COLO is running, this field will
|
|
# return 'primary' or 'secondary'.
|
|
#
|
|
# @last-mode: COLO last running mode. If COLO is running, this field
|
|
# will return same like mode field, after failover we can use this
|
|
# field to get last colo mode. (since 4.0)
|
|
#
|
|
# @reason: describes the reason for the COLO exit.
|
|
#
|
|
# Since: 3.1
|
|
##
|
|
{ 'struct': 'COLOStatus',
|
|
'data': { 'mode': 'COLOMode', 'last-mode': 'COLOMode',
|
|
'reason': 'COLOExitReason' },
|
|
'if': 'CONFIG_REPLICATION' }
|
|
|
|
##
|
|
# @query-colo-status:
|
|
#
|
|
# Query COLO status while the vm is running.
|
|
#
|
|
# Returns: A @COLOStatus object showing the status.
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "query-colo-status" }
|
|
# <- { "return": { "mode": "primary", "last-mode": "none", "reason": "request" } }
|
|
#
|
|
# Since: 3.1
|
|
##
|
|
{ 'command': 'query-colo-status',
|
|
'returns': 'COLOStatus',
|
|
'if': 'CONFIG_REPLICATION' }
|
|
|
|
##
|
|
# @migrate-recover:
|
|
#
|
|
# Provide a recovery migration stream URI.
|
|
#
|
|
# @uri: the URI to be used for the recovery of migration stream.
|
|
#
|
|
# Returns: nothing.
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate-recover",
|
|
# "arguments": { "uri": "tcp:192.168.1.200:12345" } }
|
|
# <- { "return": {} }
|
|
#
|
|
# Since: 3.0
|
|
##
|
|
{ 'command': 'migrate-recover',
|
|
'data': { 'uri': 'str' },
|
|
'allow-oob': true }
|
|
|
|
##
|
|
# @migrate-pause:
|
|
#
|
|
# Pause a migration. Currently it only supports postcopy.
|
|
#
|
|
# Returns: nothing.
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "migrate-pause" }
|
|
# <- { "return": {} }
|
|
#
|
|
# Since: 3.0
|
|
##
|
|
{ 'command': 'migrate-pause', 'allow-oob': true }
|
|
|
|
##
|
|
# @UNPLUG_PRIMARY:
|
|
#
|
|
# Emitted from source side of a migration when migration state is
|
|
# WAIT_UNPLUG. Device was unplugged by guest operating system. Device
|
|
# resources in QEMU are kept on standby to be able to re-plug it in
|
|
# case of migration failure.
|
|
#
|
|
# @device-id: QEMU device id of the unplugged device
|
|
#
|
|
# Since: 4.2
|
|
#
|
|
# Example:
|
|
#
|
|
# <- { "event": "UNPLUG_PRIMARY",
|
|
# "data": { "device-id": "hostdev0" },
|
|
# "timestamp": { "seconds": 1265044230, "microseconds": 450486 } }
|
|
##
|
|
{ 'event': 'UNPLUG_PRIMARY',
|
|
'data': { 'device-id': 'str' } }
|
|
|
|
##
|
|
# @DirtyRateVcpu:
|
|
#
|
|
# Dirty rate of vcpu.
|
|
#
|
|
# @id: vcpu index.
|
|
#
|
|
# @dirty-rate: dirty rate.
|
|
#
|
|
# Since: 6.2
|
|
##
|
|
{ 'struct': 'DirtyRateVcpu',
|
|
'data': { 'id': 'int', 'dirty-rate': 'int64' } }
|
|
|
|
##
|
|
# @DirtyRateStatus:
|
|
#
|
|
# An enumeration of dirtyrate status.
|
|
#
|
|
# @unstarted: the dirtyrate thread has not been started.
|
|
#
|
|
# @measuring: the dirtyrate thread is measuring.
|
|
#
|
|
# @measured: the dirtyrate thread has measured and results are
|
|
# available.
|
|
#
|
|
# Since: 5.2
|
|
##
|
|
{ 'enum': 'DirtyRateStatus',
|
|
'data': [ 'unstarted', 'measuring', 'measured'] }
|
|
|
|
##
|
|
# @DirtyRateMeasureMode:
|
|
#
|
|
# An enumeration of mode of measuring dirtyrate.
|
|
#
|
|
# @page-sampling: calculate dirtyrate by sampling pages.
|
|
#
|
|
# @dirty-ring: calculate dirtyrate by dirty ring.
|
|
#
|
|
# @dirty-bitmap: calculate dirtyrate by dirty bitmap.
|
|
#
|
|
# Since: 6.2
|
|
##
|
|
{ 'enum': 'DirtyRateMeasureMode',
|
|
'data': ['page-sampling', 'dirty-ring', 'dirty-bitmap'] }
|
|
|
|
##
|
|
# @DirtyRateInfo:
|
|
#
|
|
# Information about current dirty page rate of vm.
|
|
#
|
|
# @dirty-rate: an estimate of the dirty page rate of the VM in units
|
|
# of MB/s, present only when estimating the rate has completed.
|
|
#
|
|
# @status: status containing dirtyrate query status includes
|
|
# 'unstarted' or 'measuring' or 'measured'
|
|
#
|
|
# @start-time: start time in units of second for calculation
|
|
#
|
|
# @calc-time: time in units of second for sample dirty pages
|
|
#
|
|
# @sample-pages: page count per GB for sample dirty pages the default
|
|
# value is 512 (since 6.1)
|
|
#
|
|
# @mode: mode containing method of calculate dirtyrate includes
|
|
# 'page-sampling' and 'dirty-ring' (Since 6.2)
|
|
#
|
|
# @vcpu-dirty-rate: dirtyrate for each vcpu if dirty-ring mode
|
|
# specified (Since 6.2)
|
|
#
|
|
# Since: 5.2
|
|
##
|
|
{ 'struct': 'DirtyRateInfo',
|
|
'data': {'*dirty-rate': 'int64',
|
|
'status': 'DirtyRateStatus',
|
|
'start-time': 'int64',
|
|
'calc-time': 'int64',
|
|
'sample-pages': 'uint64',
|
|
'mode': 'DirtyRateMeasureMode',
|
|
'*vcpu-dirty-rate': [ 'DirtyRateVcpu' ] } }
|
|
|
|
##
|
|
# @calc-dirty-rate:
|
|
#
|
|
# start calculating dirty page rate for vm
|
|
#
|
|
# @calc-time: time in units of second for sample dirty pages
|
|
#
|
|
# @sample-pages: page count per GB for sample dirty pages the default
|
|
# value is 512 (since 6.1)
|
|
#
|
|
# @mode: mechanism of calculating dirtyrate includes 'page-sampling'
|
|
# and 'dirty-ring' (Since 6.1)
|
|
#
|
|
# Since: 5.2
|
|
#
|
|
# Example:
|
|
#
|
|
# -> {"execute": "calc-dirty-rate", "arguments": {"calc-time": 1,
|
|
# 'sample-pages': 512} }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'calc-dirty-rate', 'data': {'calc-time': 'int64',
|
|
'*sample-pages': 'int',
|
|
'*mode': 'DirtyRateMeasureMode'} }
|
|
|
|
##
|
|
# @query-dirty-rate:
|
|
#
|
|
# query dirty page rate in units of MB/s for vm
|
|
#
|
|
# Since: 5.2
|
|
##
|
|
{ 'command': 'query-dirty-rate', 'returns': 'DirtyRateInfo' }
|
|
|
|
##
|
|
# @DirtyLimitInfo:
|
|
#
|
|
# Dirty page rate limit information of a virtual CPU.
|
|
#
|
|
# @cpu-index: index of a virtual CPU.
|
|
#
|
|
# @limit-rate: upper limit of dirty page rate (MB/s) for a virtual
|
|
# CPU, 0 means unlimited.
|
|
#
|
|
# @current-rate: current dirty page rate (MB/s) for a virtual CPU.
|
|
#
|
|
# Since: 7.1
|
|
##
|
|
{ 'struct': 'DirtyLimitInfo',
|
|
'data': { 'cpu-index': 'int',
|
|
'limit-rate': 'uint64',
|
|
'current-rate': 'uint64' } }
|
|
|
|
##
|
|
# @set-vcpu-dirty-limit:
|
|
#
|
|
# Set the upper limit of dirty page rate for virtual CPUs.
|
|
#
|
|
# Requires KVM with accelerator property "dirty-ring-size" set. A
|
|
# virtual CPU's dirty page rate is a measure of its memory load. To
|
|
# observe dirty page rates, use @calc-dirty-rate.
|
|
#
|
|
# @cpu-index: index of a virtual CPU, default is all.
|
|
#
|
|
# @dirty-rate: upper limit of dirty page rate (MB/s) for virtual CPUs.
|
|
#
|
|
# Since: 7.1
|
|
#
|
|
# Example:
|
|
#
|
|
# -> {"execute": "set-vcpu-dirty-limit"}
|
|
# "arguments": { "dirty-rate": 200,
|
|
# "cpu-index": 1 } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'set-vcpu-dirty-limit',
|
|
'data': { '*cpu-index': 'int',
|
|
'dirty-rate': 'uint64' } }
|
|
|
|
##
|
|
# @cancel-vcpu-dirty-limit:
|
|
#
|
|
# Cancel the upper limit of dirty page rate for virtual CPUs.
|
|
#
|
|
# Cancel the dirty page limit for the vCPU which has been set with
|
|
# set-vcpu-dirty-limit command. Note that this command requires
|
|
# support from dirty ring, same as the "set-vcpu-dirty-limit".
|
|
#
|
|
# @cpu-index: index of a virtual CPU, default is all.
|
|
#
|
|
# Since: 7.1
|
|
#
|
|
# Example:
|
|
#
|
|
# -> {"execute": "cancel-vcpu-dirty-limit"},
|
|
# "arguments": { "cpu-index": 1 } }
|
|
# <- { "return": {} }
|
|
##
|
|
{ 'command': 'cancel-vcpu-dirty-limit',
|
|
'data': { '*cpu-index': 'int'} }
|
|
|
|
##
|
|
# @query-vcpu-dirty-limit:
|
|
#
|
|
# Returns information about virtual CPU dirty page rate limits, if
|
|
# any.
|
|
#
|
|
# Since: 7.1
|
|
#
|
|
# Example:
|
|
#
|
|
# -> {"execute": "query-vcpu-dirty-limit"}
|
|
# <- {"return": [
|
|
# { "limit-rate": 60, "current-rate": 3, "cpu-index": 0},
|
|
# { "limit-rate": 60, "current-rate": 3, "cpu-index": 1}]}
|
|
##
|
|
{ 'command': 'query-vcpu-dirty-limit',
|
|
'returns': [ 'DirtyLimitInfo' ] }
|
|
|
|
##
|
|
# @MigrationThreadInfo:
|
|
#
|
|
# Information about migrationthreads
|
|
#
|
|
# @name: the name of migration thread
|
|
#
|
|
# @thread-id: ID of the underlying host thread
|
|
#
|
|
# Since: 7.2
|
|
##
|
|
{ 'struct': 'MigrationThreadInfo',
|
|
'data': {'name': 'str',
|
|
'thread-id': 'int'} }
|
|
|
|
##
|
|
# @query-migrationthreads:
|
|
#
|
|
# Returns information of migration threads
|
|
#
|
|
# data: migration thread name
|
|
#
|
|
# Returns: information about migration threads
|
|
#
|
|
# Since: 7.2
|
|
##
|
|
{ 'command': 'query-migrationthreads',
|
|
'returns': ['MigrationThreadInfo'] }
|
|
|
|
##
|
|
# @snapshot-save:
|
|
#
|
|
# Save a VM snapshot
|
|
#
|
|
# @job-id: identifier for the newly created job
|
|
#
|
|
# @tag: name of the snapshot to create
|
|
#
|
|
# @vmstate: block device node name to save vmstate to
|
|
#
|
|
# @devices: list of block device node names to save a snapshot to
|
|
#
|
|
# Applications should not assume that the snapshot save is complete
|
|
# when this command returns. The job commands / events must be used
|
|
# to determine completion and to fetch details of any errors that
|
|
# arise.
|
|
#
|
|
# Note that execution of the guest CPUs may be stopped during the time
|
|
# it takes to save the snapshot. A future version of QEMU may ensure
|
|
# CPUs are executing continuously.
|
|
#
|
|
# It is strongly recommended that @devices contain all writable block
|
|
# device nodes if a consistent snapshot is required.
|
|
#
|
|
# If @tag already exists, an error will be reported
|
|
#
|
|
# Returns: nothing
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "snapshot-save",
|
|
# "arguments": {
|
|
# "job-id": "snapsave0",
|
|
# "tag": "my-snap",
|
|
# "vmstate": "disk0",
|
|
# "devices": ["disk0", "disk1"]
|
|
# }
|
|
# }
|
|
# <- { "return": { } }
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1432121972, "microseconds": 744001},
|
|
# "data": {"status": "created", "id": "snapsave0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1432122172, "microseconds": 744001},
|
|
# "data": {"status": "running", "id": "snapsave0"}}
|
|
# <- {"event": "STOP",
|
|
# "timestamp": {"seconds": 1432122372, "microseconds": 744001} }
|
|
# <- {"event": "RESUME",
|
|
# "timestamp": {"seconds": 1432122572, "microseconds": 744001} }
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1432122772, "microseconds": 744001},
|
|
# "data": {"status": "waiting", "id": "snapsave0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1432122972, "microseconds": 744001},
|
|
# "data": {"status": "pending", "id": "snapsave0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1432123172, "microseconds": 744001},
|
|
# "data": {"status": "concluded", "id": "snapsave0"}}
|
|
# -> {"execute": "query-jobs"}
|
|
# <- {"return": [{"current-progress": 1,
|
|
# "status": "concluded",
|
|
# "total-progress": 1,
|
|
# "type": "snapshot-save",
|
|
# "id": "snapsave0"}]}
|
|
#
|
|
# Since: 6.0
|
|
##
|
|
{ 'command': 'snapshot-save',
|
|
'data': { 'job-id': 'str',
|
|
'tag': 'str',
|
|
'vmstate': 'str',
|
|
'devices': ['str'] } }
|
|
|
|
##
|
|
# @snapshot-load:
|
|
#
|
|
# Load a VM snapshot
|
|
#
|
|
# @job-id: identifier for the newly created job
|
|
#
|
|
# @tag: name of the snapshot to load.
|
|
#
|
|
# @vmstate: block device node name to load vmstate from
|
|
#
|
|
# @devices: list of block device node names to load a snapshot from
|
|
#
|
|
# Applications should not assume that the snapshot load is complete
|
|
# when this command returns. The job commands / events must be used
|
|
# to determine completion and to fetch details of any errors that
|
|
# arise.
|
|
#
|
|
# Note that execution of the guest CPUs will be stopped during the
|
|
# time it takes to load the snapshot.
|
|
#
|
|
# It is strongly recommended that @devices contain all writable block
|
|
# device nodes that can have changed since the original @snapshot-save
|
|
# command execution.
|
|
#
|
|
# Returns: nothing
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "snapshot-load",
|
|
# "arguments": {
|
|
# "job-id": "snapload0",
|
|
# "tag": "my-snap",
|
|
# "vmstate": "disk0",
|
|
# "devices": ["disk0", "disk1"]
|
|
# }
|
|
# }
|
|
# <- { "return": { } }
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1472124172, "microseconds": 744001},
|
|
# "data": {"status": "created", "id": "snapload0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1472125172, "microseconds": 744001},
|
|
# "data": {"status": "running", "id": "snapload0"}}
|
|
# <- {"event": "STOP",
|
|
# "timestamp": {"seconds": 1472125472, "microseconds": 744001} }
|
|
# <- {"event": "RESUME",
|
|
# "timestamp": {"seconds": 1472125872, "microseconds": 744001} }
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1472126172, "microseconds": 744001},
|
|
# "data": {"status": "waiting", "id": "snapload0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1472127172, "microseconds": 744001},
|
|
# "data": {"status": "pending", "id": "snapload0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1472128172, "microseconds": 744001},
|
|
# "data": {"status": "concluded", "id": "snapload0"}}
|
|
# -> {"execute": "query-jobs"}
|
|
# <- {"return": [{"current-progress": 1,
|
|
# "status": "concluded",
|
|
# "total-progress": 1,
|
|
# "type": "snapshot-load",
|
|
# "id": "snapload0"}]}
|
|
#
|
|
# Since: 6.0
|
|
##
|
|
{ 'command': 'snapshot-load',
|
|
'data': { 'job-id': 'str',
|
|
'tag': 'str',
|
|
'vmstate': 'str',
|
|
'devices': ['str'] } }
|
|
|
|
##
|
|
# @snapshot-delete:
|
|
#
|
|
# Delete a VM snapshot
|
|
#
|
|
# @job-id: identifier for the newly created job
|
|
#
|
|
# @tag: name of the snapshot to delete.
|
|
#
|
|
# @devices: list of block device node names to delete a snapshot from
|
|
#
|
|
# Applications should not assume that the snapshot delete is complete
|
|
# when this command returns. The job commands / events must be used
|
|
# to determine completion and to fetch details of any errors that
|
|
# arise.
|
|
#
|
|
# Returns: nothing
|
|
#
|
|
# Example:
|
|
#
|
|
# -> { "execute": "snapshot-delete",
|
|
# "arguments": {
|
|
# "job-id": "snapdelete0",
|
|
# "tag": "my-snap",
|
|
# "devices": ["disk0", "disk1"]
|
|
# }
|
|
# }
|
|
# <- { "return": { } }
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1442124172, "microseconds": 744001},
|
|
# "data": {"status": "created", "id": "snapdelete0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1442125172, "microseconds": 744001},
|
|
# "data": {"status": "running", "id": "snapdelete0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1442126172, "microseconds": 744001},
|
|
# "data": {"status": "waiting", "id": "snapdelete0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1442127172, "microseconds": 744001},
|
|
# "data": {"status": "pending", "id": "snapdelete0"}}
|
|
# <- {"event": "JOB_STATUS_CHANGE",
|
|
# "timestamp": {"seconds": 1442128172, "microseconds": 744001},
|
|
# "data": {"status": "concluded", "id": "snapdelete0"}}
|
|
# -> {"execute": "query-jobs"}
|
|
# <- {"return": [{"current-progress": 1,
|
|
# "status": "concluded",
|
|
# "total-progress": 1,
|
|
# "type": "snapshot-delete",
|
|
# "id": "snapdelete0"}]}
|
|
#
|
|
# Since: 6.0
|
|
##
|
|
{ 'command': 'snapshot-delete',
|
|
'data': { 'job-id': 'str',
|
|
'tag': 'str',
|
|
'devices': ['str'] } }
|