OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
baa44bce87
qemu-e2k/hw/sensor/max31785.c
Maheswara Kurapati 6236548284 hw/sensor: add Maxim MAX31785 device 
MAX31785 is a PMBus compliant 6-Channel fan controller. It supports 6 fan
channels, 11 temperature sensors, and 6-Channel ADC to measure the remote
voltages. Datasheet can be found here:
https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf

This initial version of the driver has skeleton and support for the
fan channels. Requests for temperature sensors, and ADC Channels the
are serviced with the default values as per the datasheet.  No additional
instrumentation is done. NV Log feature is not supported.

Signed-off-by: Maheswara Kurapati <quic_mkurapat@quicinc.com>
Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220627154703.148943-5-quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
2022-06-30 09:21:13 +02:00

574 lines
22 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Maxim MAX31785 PMBus 6-Channel Fan Controller
*
* Datasheet:
* https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
*
* Copyright(c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
*/
#include "qemu/osdep.h"
#include "hw/i2c/pmbus_device.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/log.h"
#include "qemu/module.h"
#define TYPE_MAX31785 "max31785"
#define MAX31785(obj) OBJECT_CHECK(MAX31785State, (obj), TYPE_MAX31785)
/* MAX31785 mfr specific PMBus commands */
#define MAX31785_MFR_MODE 0xD1
#define MAX31785_MFR_PSEN_CONFIG 0xD2
#define MAX31785_MFR_VOUT_PEAK 0xD4
#define MAX31785_MFR_TEMPERATURE_PEAK 0xD6
#define MAX31785_MFR_VOUT_MIN 0xD7
#define MAX31785_MFR_FAULT_RESPONSE 0xD9
#define MAX31785_MFR_NV_FAULT_LOG 0xDC
#define MAX31785_MFR_TIME_COUNT 0xDD
#define MAX31785_MFR_TEMP_SENSOR_CONFIG 0xF0
#define MAX31785_MFR_FAN_CONFIG 0xF1
#define MAX31785_MFR_FAN_LUT 0xF2
#define MAX31785_MFR_READ_FAN_PWM 0xF3
#define MAX31785_MFR_FAN_FAULT_LIMIT 0xF5
#define MAX31785_MFR_FAN_WARN_LIMIT 0xF6
#define MAX31785_MFR_FAN_RUN_TIME 0xF7
#define MAX31785_MFR_FAN_PWM_AVG 0xF8
#define MAX31785_MFR_FAN_PWM2RPM 0xF9
/* defaults as per the data sheet */
#define MAX31785_DEFAULT_CAPABILITY 0x10
#define MAX31785_DEFAULT_VOUT_MODE 0x40
#define MAX31785_DEFAULT_VOUT_SCALE_MONITOR 0x7FFF
#define MAX31785_DEFAULT_FAN_COMMAND_1 0x7FFF
#define MAX31785_DEFAULT_OV_FAULT_LIMIT 0x7FFF
#define MAX31785_DEFAULT_OV_WARN_LIMIT 0x7FFF
#define MAX31785_DEFAULT_OT_FAULT_LIMIT 0x7FFF
#define MAX31785_DEFAULT_OT_WARN_LIMIT 0x7FFF
#define MAX31785_DEFAULT_PMBUS_REVISION 0x11
#define MAX31785_DEFAULT_MFR_ID 0x4D
#define MAX31785_DEFAULT_MFR_MODEL 0x53
#define MAX31785_DEFAULT_MFR_REVISION 0x3030
#define MAX31785A_DEFAULT_MFR_REVISION 0x3040
#define MAX31785B_DEFAULT_MFR_REVISION 0x3061
#define MAX31785B_DEFAULT_MFR_TEMPERATURE_PEAK 0x8000
#define MAX31785B_DEFAULT_MFR_VOUT_MIN 0x7FFF
#define MAX31785_DEFAULT_TEXT 0x3130313031303130
/* MAX31785 pages */
#define MAX31785_TOTAL_NUM_PAGES 23
#define MAX31785_FAN_PAGES 6
#define MAX31785_MIN_FAN_PAGE 0
#define MAX31785_MAX_FAN_PAGE 5
#define MAX31785_MIN_TEMP_PAGE 6
#define MAX31785_MAX_TEMP_PAGE 16
#define MAX31785_MIN_ADC_VOLTAGE_PAGE 17
#define MAX31785_MAX_ADC_VOLTAGE_PAGE 22
/* FAN_CONFIG_1_2 */
#define MAX31785_MFR_FAN_CONFIG 0xF1
#define MAX31785_FAN_CONFIG_ENABLE BIT(7)
#define MAX31785_FAN_CONFIG_RPM_PWM BIT(6)
#define MAX31785_FAN_CONFIG_PULSE(pulse) (pulse << 4)
#define MAX31785_DEFAULT_FAN_CONFIG_1_2(pulse) \
(MAX31785_FAN_CONFIG_ENABLE | MAX31785_FAN_CONFIG_PULSE(pulse))
#define MAX31785_DEFAULT_MFR_FAN_CONFIG 0x0000
/* fan speed in RPM */
#define MAX31785_DEFAULT_FAN_SPEED 0x7fff
#define MAX31785_DEFAULT_FAN_STATUS 0x00
#define MAX31785_DEFAULT_FAN_MAX_PWM 0x2710
/*
* MAX31785State:
* @code: The command code received
* @page: Each page corresponds to a device monitored by the Max 31785
* The page register determines the available commands depending on device
* _____________________________________________________________________________
* | 0 | Fan Connected to PWM0 |
* |_______|___________________________________________________________________|
* | 1 | Fan Connected to PWM1 |
* |_______|___________________________________________________________________|
* | 2 | Fan Connected to PWM2 |
* |_______|___________________________________________________________________|
* | 3 | Fan Connected to PWM3 |
* |_______|___________________________________________________________________|
* | 4 | Fan Connected to PWM4 |
* |_______|___________________________________________________________________|
* | 5 | Fan Connected to PWM5 |
* |_______|___________________________________________________________________|
* | 6 | Remote Thermal Diode Connected to ADC 0 |
* |_______|___________________________________________________________________|
* | 7 | Remote Thermal Diode Connected to ADC 1 |
* |_______|___________________________________________________________________|
* | 8 | Remote Thermal Diode Connected to ADC 2 |
* |_______|___________________________________________________________________|
* | 9 | Remote Thermal Diode Connected to ADC 3 |
* |_______|___________________________________________________________________|
* | 10 | Remote Thermal Diode Connected to ADC 4 |
* |_______|___________________________________________________________________|
* | 11 | Remote Thermal Diode Connected to ADC 5 |
* |_______|___________________________________________________________________|
* | 12 | Internal Temperature Sensor |
* |_______|___________________________________________________________________|
* | 13 | Remote I2C Temperature Sensor with Address 0 |
* |_______|___________________________________________________________________|
* | 14 | Remote I2C Temperature Sensor with Address 1 |
* |_______|___________________________________________________________________|
* | 15 | Remote I2C Temperature Sensor with Address 2 |
* |_______|___________________________________________________________________|
* | 16 | Remote I2C Temperature Sensor with Address 3 |
* |_______|___________________________________________________________________|
* | 17 | Remote I2C Temperature Sensor with Address 4 |
* |_______|___________________________________________________________________|
* | 17 | Remote Voltage Connected to ADC0 |
* |_______|___________________________________________________________________|
* | 18 | Remote Voltage Connected to ADC1 |
* |_______|___________________________________________________________________|
* | 19 | Remote Voltage Connected to ADC2 |
* |_______|___________________________________________________________________|
* | 20 | Remote Voltage Connected to ADC3 |
* |_______|___________________________________________________________________|
* | 21 | Remote Voltage Connected to ADC4 |
* |_______|___________________________________________________________________|
* | 22 | Remote Voltage Connected to ADC5 |
* |_______|___________________________________________________________________|
* |23-254 | Reserved |
* |_______|___________________________________________________________________|
* | 255 | Applies to all pages |
* |_______|___________________________________________________________________|
*/
/* Place holder to save the max31785 mfr specific registers */
typedef struct MAX31785State {
PMBusDevice parent;
uint16_t mfr_mode[MAX31785_TOTAL_NUM_PAGES];
uint16_t vout_peak[MAX31785_TOTAL_NUM_PAGES];
uint16_t temperature_peak[MAX31785_TOTAL_NUM_PAGES];
uint16_t vout_min[MAX31785_TOTAL_NUM_PAGES];
uint8_t fault_response[MAX31785_TOTAL_NUM_PAGES];
uint32_t time_count[MAX31785_TOTAL_NUM_PAGES];
uint16_t temp_sensor_config[MAX31785_TOTAL_NUM_PAGES];
uint16_t fan_config[MAX31785_TOTAL_NUM_PAGES];
uint16_t read_fan_pwm[MAX31785_TOTAL_NUM_PAGES];
uint16_t fan_fault_limit[MAX31785_TOTAL_NUM_PAGES];
uint16_t fan_warn_limit[MAX31785_TOTAL_NUM_PAGES];
uint16_t fan_run_time[MAX31785_TOTAL_NUM_PAGES];
uint16_t fan_pwm_avg[MAX31785_TOTAL_NUM_PAGES];
uint64_t fan_pwm2rpm[MAX31785_TOTAL_NUM_PAGES];
uint64_t mfr_location;
uint64_t mfr_date;
uint64_t mfr_serial;
uint16_t mfr_revision;
} MAX31785State;
static uint8_t max31785_read_byte(PMBusDevice *pmdev)
{
MAX31785State *s = MAX31785(pmdev);
switch (pmdev->code) {
case PMBUS_FAN_CONFIG_1_2:
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send8(pmdev, pmdev->pages[pmdev->page].fan_config_1_2);
}
break;
case PMBUS_FAN_COMMAND_1:
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, pmdev->pages[pmdev->page].fan_command_1);
}
break;
case PMBUS_READ_FAN_SPEED_1:
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, pmdev->pages[pmdev->page].read_fan_speed_1);
}
break;
case PMBUS_STATUS_FANS_1_2:
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, pmdev->pages[pmdev->page].status_fans_1_2);
}
break;
case PMBUS_MFR_REVISION:
pmbus_send16(pmdev, MAX31785_DEFAULT_MFR_REVISION);
break;
case PMBUS_MFR_ID:
pmbus_send8(pmdev, 0x4d); /* Maxim */
break;
case PMBUS_MFR_MODEL:
pmbus_send8(pmdev, 0x53);
break;
case PMBUS_MFR_LOCATION:
pmbus_send64(pmdev, s->mfr_location);
break;
case PMBUS_MFR_DATE:
pmbus_send64(pmdev, s->mfr_date);
break;
case PMBUS_MFR_SERIAL:
pmbus_send64(pmdev, s->mfr_serial);
break;
case MAX31785_MFR_MODE:
pmbus_send16(pmdev, s->mfr_mode[pmdev->page]);
break;
case MAX31785_MFR_VOUT_PEAK:
if ((pmdev->page >= MAX31785_MIN_ADC_VOLTAGE_PAGE) &&
(pmdev->page <= MAX31785_MAX_ADC_VOLTAGE_PAGE)) {
pmbus_send16(pmdev, s->vout_peak[pmdev->page]);
}
break;
case MAX31785_MFR_TEMPERATURE_PEAK:
if ((pmdev->page >= MAX31785_MIN_TEMP_PAGE) &&
(pmdev->page <= MAX31785_MAX_TEMP_PAGE)) {
pmbus_send16(pmdev, s->temperature_peak[pmdev->page]);
}
break;
case MAX31785_MFR_VOUT_MIN:
if ((pmdev->page >= MAX31785_MIN_ADC_VOLTAGE_PAGE) &&
(pmdev->page <= MAX31785_MAX_ADC_VOLTAGE_PAGE)) {
pmbus_send16(pmdev, s->vout_min[pmdev->page]);
}
break;
case MAX31785_MFR_FAULT_RESPONSE:
pmbus_send8(pmdev, s->fault_response[pmdev->page]);
break;
case MAX31785_MFR_TIME_COUNT: /* R/W 32 */
pmbus_send32(pmdev, s->time_count[pmdev->page]);
break;
case MAX31785_MFR_TEMP_SENSOR_CONFIG: /* R/W 16 */
if ((pmdev->page >= MAX31785_MIN_TEMP_PAGE) &&
(pmdev->page <= MAX31785_MAX_TEMP_PAGE)) {
pmbus_send16(pmdev, s->temp_sensor_config[pmdev->page]);
}
break;
case MAX31785_MFR_FAN_CONFIG: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, s->fan_config[pmdev->page]);
}
break;
case MAX31785_MFR_READ_FAN_PWM: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, s->read_fan_pwm[pmdev->page]);
}
break;
case MAX31785_MFR_FAN_FAULT_LIMIT: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, s->fan_fault_limit[pmdev->page]);
}
break;
case MAX31785_MFR_FAN_WARN_LIMIT: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, s->fan_warn_limit[pmdev->page]);
}
break;
case MAX31785_MFR_FAN_RUN_TIME: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, s->fan_run_time[pmdev->page]);
}
break;
case MAX31785_MFR_FAN_PWM_AVG: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send16(pmdev, s->fan_pwm_avg[pmdev->page]);
}
break;
case MAX31785_MFR_FAN_PWM2RPM: /* R/W 64 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmbus_send64(pmdev, s->fan_pwm2rpm[pmdev->page]);
}
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: reading from unsupported register: 0x%02x\n",
__func__, pmdev->code);
break;
}
return 0xFF;
}
static int max31785_write_data(PMBusDevice *pmdev, const uint8_t *buf,
uint8_t len)
{
MAX31785State *s = MAX31785(pmdev);
if (len == 0) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: writing empty data\n", __func__);
return -1;
}
pmdev->code = buf[0]; /* PMBus command code */
if (len == 1) {
return 0;
}
/* Exclude command code from buffer */
buf++;
len--;
switch (pmdev->code) {
case PMBUS_FAN_CONFIG_1_2:
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmdev->pages[pmdev->page].fan_config_1_2 = pmbus_receive8(pmdev);
}
break;
case PMBUS_FAN_COMMAND_1:
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
pmdev->pages[pmdev->page].fan_command_1 = pmbus_receive16(pmdev);
pmdev->pages[pmdev->page].read_fan_speed_1 =
((MAX31785_DEFAULT_FAN_SPEED / MAX31785_DEFAULT_FAN_MAX_PWM) *
pmdev->pages[pmdev->page].fan_command_1);
}
break;
case PMBUS_MFR_LOCATION: /* R/W 64 */
s->mfr_location = pmbus_receive64(pmdev);
break;
case PMBUS_MFR_DATE: /* R/W 64 */
s->mfr_date = pmbus_receive64(pmdev);
break;
case PMBUS_MFR_SERIAL: /* R/W 64 */
s->mfr_serial = pmbus_receive64(pmdev);
break;
case MAX31785_MFR_MODE: /* R/W word */
s->mfr_mode[pmdev->page] = pmbus_receive16(pmdev);
break;
case MAX31785_MFR_VOUT_PEAK: /* R/W word */
if ((pmdev->page >= MAX31785_MIN_ADC_VOLTAGE_PAGE) &&
(pmdev->page <= MAX31785_MAX_ADC_VOLTAGE_PAGE)) {
s->vout_peak[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_TEMPERATURE_PEAK: /* R/W word */
if ((pmdev->page >= 6) && (pmdev->page <= 16)) {
s->temperature_peak[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_VOUT_MIN: /* R/W word */
if ((pmdev->page >= MAX31785_MIN_ADC_VOLTAGE_PAGE) &&
(pmdev->page <= MAX31785_MAX_ADC_VOLTAGE_PAGE)) {
s->vout_min[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_FAULT_RESPONSE: /* R/W 8 */
s->fault_response[pmdev->page] = pmbus_receive8(pmdev);
break;
case MAX31785_MFR_TIME_COUNT: /* R/W 32 */
s->time_count[pmdev->page] = pmbus_receive32(pmdev);
break;
case MAX31785_MFR_TEMP_SENSOR_CONFIG: /* R/W 16 */
if ((pmdev->page >= MAX31785_MIN_TEMP_PAGE) &&
(pmdev->page <= MAX31785_MAX_TEMP_PAGE)) {
s->temp_sensor_config[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_FAN_CONFIG: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
s->fan_config[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_FAN_FAULT_LIMIT: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
s->fan_fault_limit[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_FAN_WARN_LIMIT: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
s->fan_warn_limit[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_FAN_RUN_TIME: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
s->fan_run_time[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_FAN_PWM_AVG: /* R/W 16 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
s->fan_pwm_avg[pmdev->page] = pmbus_receive16(pmdev);
}
break;
case MAX31785_MFR_FAN_PWM2RPM: /* R/W 64 */
if (pmdev->page <= MAX31785_MAX_FAN_PAGE) {
s->fan_pwm2rpm[pmdev->page] = pmbus_receive64(pmdev);
}
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: writing to unsupported register: 0x%02x\n",
__func__, pmdev->code);
break;
}
return 0;
}
static void max31785_exit_reset(Object *obj)
{
PMBusDevice *pmdev = PMBUS_DEVICE(obj);
MAX31785State *s = MAX31785(obj);
pmdev->capability = MAX31785_DEFAULT_CAPABILITY;
for (int i = MAX31785_MIN_FAN_PAGE; i <= MAX31785_MAX_FAN_PAGE; i++) {
pmdev->pages[i].vout_mode = MAX31785_DEFAULT_VOUT_MODE;
pmdev->pages[i].fan_command_1 = MAX31785_DEFAULT_FAN_COMMAND_1;
pmdev->pages[i].revision = MAX31785_DEFAULT_PMBUS_REVISION;
pmdev->pages[i].fan_config_1_2 = MAX31785_DEFAULT_FAN_CONFIG_1_2(0);
pmdev->pages[i].read_fan_speed_1 = MAX31785_DEFAULT_FAN_SPEED;
pmdev->pages[i].status_fans_1_2 = MAX31785_DEFAULT_FAN_STATUS;
}
for (int i = MAX31785_MIN_TEMP_PAGE; i <= MAX31785_MAX_TEMP_PAGE; i++) {
pmdev->pages[i].vout_mode = MAX31785_DEFAULT_VOUT_MODE;
pmdev->pages[i].revision = MAX31785_DEFAULT_PMBUS_REVISION;
pmdev->pages[i].ot_fault_limit = MAX31785_DEFAULT_OT_FAULT_LIMIT;
pmdev->pages[i].ot_warn_limit = MAX31785_DEFAULT_OT_WARN_LIMIT;
}
for (int i = MAX31785_MIN_ADC_VOLTAGE_PAGE;
i <= MAX31785_MAX_ADC_VOLTAGE_PAGE;
i++) {
pmdev->pages[i].vout_mode = MAX31785_DEFAULT_VOUT_MODE;
pmdev->pages[i].revision = MAX31785_DEFAULT_PMBUS_REVISION;
pmdev->pages[i].vout_scale_monitor =
MAX31785_DEFAULT_VOUT_SCALE_MONITOR;
pmdev->pages[i].vout_ov_fault_limit = MAX31785_DEFAULT_OV_FAULT_LIMIT;
pmdev->pages[i].vout_ov_warn_limit = MAX31785_DEFAULT_OV_WARN_LIMIT;
}
s->mfr_location = MAX31785_DEFAULT_TEXT;
s->mfr_date = MAX31785_DEFAULT_TEXT;
s->mfr_serial = MAX31785_DEFAULT_TEXT;
}
static const VMStateDescription vmstate_max31785 = {
.name = TYPE_MAX31785,
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]){
VMSTATE_PMBUS_DEVICE(parent, MAX31785State),
VMSTATE_UINT16_ARRAY(mfr_mode, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(vout_peak, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(temperature_peak, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(vout_min, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT8_ARRAY(fault_response, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT32_ARRAY(time_count, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(temp_sensor_config, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(fan_config, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(read_fan_pwm, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(fan_fault_limit, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(fan_warn_limit, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(fan_run_time, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT16_ARRAY(fan_pwm_avg, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT64_ARRAY(fan_pwm2rpm, MAX31785State,
MAX31785_TOTAL_NUM_PAGES),
VMSTATE_UINT64(mfr_location, MAX31785State),
VMSTATE_UINT64(mfr_date, MAX31785State),
VMSTATE_UINT64(mfr_serial, MAX31785State),
VMSTATE_END_OF_LIST()
}
};
static void max31785_init(Object *obj)
{
PMBusDevice *pmdev = PMBUS_DEVICE(obj);
for (int i = MAX31785_MIN_FAN_PAGE; i <= MAX31785_MAX_FAN_PAGE; i++) {
pmbus_page_config(pmdev, i, PB_HAS_VOUT_MODE);
}
for (int i = MAX31785_MIN_TEMP_PAGE; i <= MAX31785_MAX_TEMP_PAGE; i++) {
pmbus_page_config(pmdev, i, PB_HAS_VOUT_MODE | PB_HAS_TEMPERATURE);
}
for (int i = MAX31785_MIN_ADC_VOLTAGE_PAGE;
i <= MAX31785_MAX_ADC_VOLTAGE_PAGE;
i++) {
pmbus_page_config(pmdev, i, PB_HAS_VOUT_MODE | PB_HAS_VOUT |
PB_HAS_VOUT_RATING);
}
}
static void max31785_class_init(ObjectClass *klass, void *data)
{
ResettableClass *rc = RESETTABLE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
PMBusDeviceClass *k = PMBUS_DEVICE_CLASS(klass);
dc->desc = "Maxim MAX31785 6-Channel Fan Controller";
dc->vmsd = &vmstate_max31785;
k->write_data = max31785_write_data;
k->receive_byte = max31785_read_byte;
k->device_num_pages = MAX31785_TOTAL_NUM_PAGES;
rc->phases.exit = max31785_exit_reset;
}
static const TypeInfo max31785_info = {
.name = TYPE_MAX31785,
.parent = TYPE_PMBUS_DEVICE,
.instance_size = sizeof(MAX31785State),
.instance_init = max31785_init,
.class_init = max31785_class_init,
};
static void max31785_register_types(void)
{
type_register_static(&max31785_info);
}
type_init(max31785_register_types)
Reference in New Issue View Git Blame Copy Permalink