OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
bc4ca8efba
qemu-e2k/hw/sensor/adm1272.c
Titus Rwantare c93488f16b hw/misc: add ADM1272 device 
The ADM1272 is a PMBus compliant Hot Swap Controller and Digital Power
Monitor by Analog Devices.

This commit adds support for interfacing with it, and support for
setting and monitoring sensor limits.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1272.pdf

Reviewed-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Titus Rwantare <titusr@google.com>
Message-Id: <20210708172556.1868139-3-titusr@google.com>
[Moved the device to the sensor directory]
[remove include of trace.h, it is not needed]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2021-07-08 14:41:50 -05:00

544 lines
16 KiB
C
Raw Blame History

/*
* Analog Devices ADM1272 High Voltage Positive Hot Swap Controller and Digital
* Power Monitor with PMBus
*
* Copyright 2021 Google LLC
*
* SPDX-License-Identifier: GPL-2.0-or-later
*/
#include "qemu/osdep.h"
#include <string.h>
#include "hw/i2c/pmbus_device.h"
#include "hw/irq.h"
#include "migration/vmstate.h"
#include "qapi/error.h"
#include "qapi/visitor.h"
#include "qemu/log.h"
#include "qemu/module.h"
#define TYPE_ADM1272 "adm1272"
#define ADM1272(obj) OBJECT_CHECK(ADM1272State, (obj), TYPE_ADM1272)
#define ADM1272_RESTART_TIME 0xCC
#define ADM1272_MFR_PEAK_IOUT 0xD0
#define ADM1272_MFR_PEAK_VIN 0xD1
#define ADM1272_MFR_PEAK_VOUT 0xD2
#define ADM1272_MFR_PMON_CONTROL 0xD3
#define ADM1272_MFR_PMON_CONFIG 0xD4
#define ADM1272_MFR_ALERT1_CONFIG 0xD5
#define ADM1272_MFR_ALERT2_CONFIG 0xD6
#define ADM1272_MFR_PEAK_TEMPERATURE 0xD7
#define ADM1272_MFR_DEVICE_CONFIG 0xD8
#define ADM1272_MFR_POWER_CYCLE 0xD9
#define ADM1272_MFR_PEAK_PIN 0xDA
#define ADM1272_MFR_READ_PIN_EXT 0xDB
#define ADM1272_MFR_READ_EIN_EXT 0xDC
#define ADM1272_HYSTERESIS_LOW 0xF2
#define ADM1272_HYSTERESIS_HIGH 0xF3
#define ADM1272_STATUS_HYSTERESIS 0xF4
#define ADM1272_STATUS_GPIO 0xF5
#define ADM1272_STRT_UP_IOUT_LIM 0xF6
/* Defaults */
#define ADM1272_OPERATION_DEFAULT 0x80
#define ADM1272_CAPABILITY_DEFAULT 0xB0
#define ADM1272_CAPABILITY_NO_PEC 0x30
#define ADM1272_DIRECT_MODE 0x40
#define ADM1272_HIGH_LIMIT_DEFAULT 0x0FFF
#define ADM1272_PIN_OP_DEFAULT 0x7FFF
#define ADM1272_PMBUS_REVISION_DEFAULT 0x22
#define ADM1272_MFR_ID_DEFAULT "ADI"
#define ADM1272_MODEL_DEFAULT "ADM1272-A1"
#define ADM1272_MFR_DEFAULT_REVISION "25"
#define ADM1272_DEFAULT_DATE "160301"
#define ADM1272_RESTART_TIME_DEFAULT 0x64
#define ADM1272_PMON_CONTROL_DEFAULT 0x1
#define ADM1272_PMON_CONFIG_DEFAULT 0x3F35
#define ADM1272_DEVICE_CONFIG_DEFAULT 0x8
#define ADM1272_HYSTERESIS_HIGH_DEFAULT 0xFFFF
#define ADM1272_STRT_UP_IOUT_LIM_DEFAULT 0x000F
#define ADM1272_VOLT_DEFAULT 12000
#define ADM1272_IOUT_DEFAULT 25000
#define ADM1272_PWR_DEFAULT 300 /* 12V 25A */
#define ADM1272_SHUNT 300 /* micro-ohms */
#define ADM1272_VOLTAGE_COEFF_DEFAULT 1
#define ADM1272_CURRENT_COEFF_DEFAULT 3
#define ADM1272_PWR_COEFF_DEFAULT 7
#define ADM1272_IOUT_OFFSET 0x5000
#define ADM1272_IOUT_OFFSET 0x5000
typedef struct ADM1272State {
PMBusDevice parent;
uint64_t ein_ext;
uint32_t pin_ext;
uint8_t restart_time;
uint16_t peak_vin;
uint16_t peak_vout;
uint16_t peak_iout;
uint16_t peak_temperature;
uint16_t peak_pin;
uint8_t pmon_control;
uint16_t pmon_config;
uint16_t alert1_config;
uint16_t alert2_config;
uint16_t device_config;
uint16_t hysteresis_low;
uint16_t hysteresis_high;
uint8_t status_hysteresis;
uint8_t status_gpio;
uint16_t strt_up_iout_lim;
} ADM1272State;
static const PMBusCoefficients adm1272_coefficients[] = {
[0] = { 6770, 0, -2 }, /* voltage, vrange 60V */
[1] = { 4062, 0, -2 }, /* voltage, vrange 100V */
[2] = { 1326, 20480, -1 }, /* current, vsense range 15mV */
[3] = { 663, 20480, -1 }, /* current, vsense range 30mV */
[4] = { 3512, 0, -2 }, /* power, vrange 60V, irange 15mV */
[5] = { 21071, 0, -3 }, /* power, vrange 100V, irange 15mV */
[6] = { 17561, 0, -3 }, /* power, vrange 60V, irange 30mV */
[7] = { 10535, 0, -3 }, /* power, vrange 100V, irange 30mV */
[8] = { 42, 31871, -1 }, /* temperature */
};
static void adm1272_check_limits(ADM1272State *s)
{
PMBusDevice *pmdev = PMBUS_DEVICE(s);
pmbus_check_limits(pmdev);
if (pmdev->pages[0].read_vout > s->peak_vout) {
s->peak_vout = pmdev->pages[0].read_vout;
}
if (pmdev->pages[0].read_vin > s->peak_vin) {
s->peak_vin = pmdev->pages[0].read_vin;
}
if (pmdev->pages[0].read_iout > s->peak_iout) {
s->peak_iout = pmdev->pages[0].read_iout;
}
if (pmdev->pages[0].read_temperature_1 > s->peak_temperature) {
s->peak_temperature = pmdev->pages[0].read_temperature_1;
}
if (pmdev->pages[0].read_pin > s->peak_pin) {
s->peak_pin = pmdev->pages[0].read_pin;
}
}
static uint16_t adm1272_millivolts_to_direct(uint32_t value)
{
PMBusCoefficients c = adm1272_coefficients[ADM1272_VOLTAGE_COEFF_DEFAULT];
c.b = c.b * 1000;
c.R = c.R - 3;
return pmbus_data2direct_mode(c, value);
}
static uint32_t adm1272_direct_to_millivolts(uint16_t value)
{
PMBusCoefficients c = adm1272_coefficients[ADM1272_VOLTAGE_COEFF_DEFAULT];
c.b = c.b * 1000;
c.R = c.R - 3;
return pmbus_direct_mode2data(c, value);
}
static uint16_t adm1272_milliamps_to_direct(uint32_t value)
{
PMBusCoefficients c = adm1272_coefficients[ADM1272_CURRENT_COEFF_DEFAULT];
/* Y = (m * r_sense * x - b) * 10^R */
c.m = c.m * ADM1272_SHUNT / 1000; /* micro-ohms */
c.b = c.b * 1000;
c.R = c.R - 3;
return pmbus_data2direct_mode(c, value);
}
static uint32_t adm1272_direct_to_milliamps(uint16_t value)
{
PMBusCoefficients c = adm1272_coefficients[ADM1272_CURRENT_COEFF_DEFAULT];
c.m = c.m * ADM1272_SHUNT / 1000;
c.b = c.b * 1000;
c.R = c.R - 3;
return pmbus_direct_mode2data(c, value);
}
static uint16_t adm1272_watts_to_direct(uint32_t value)
{
PMBusCoefficients c = adm1272_coefficients[ADM1272_PWR_COEFF_DEFAULT];
c.m = c.m * ADM1272_SHUNT / 1000;
return pmbus_data2direct_mode(c, value);
}
static uint32_t adm1272_direct_to_watts(uint16_t value)
{
PMBusCoefficients c = adm1272_coefficients[ADM1272_PWR_COEFF_DEFAULT];
c.m = c.m * ADM1272_SHUNT / 1000;
return pmbus_direct_mode2data(c, value);
}
static void adm1272_exit_reset(Object *obj)
{
ADM1272State *s = ADM1272(obj);
PMBusDevice *pmdev = PMBUS_DEVICE(obj);
pmdev->page = 0;
pmdev->pages[0].operation = ADM1272_OPERATION_DEFAULT;
pmdev->capability = ADM1272_CAPABILITY_NO_PEC;
pmdev->pages[0].revision = ADM1272_PMBUS_REVISION_DEFAULT;
pmdev->pages[0].vout_mode = ADM1272_DIRECT_MODE;
pmdev->pages[0].vout_ov_warn_limit = ADM1272_HIGH_LIMIT_DEFAULT;
pmdev->pages[0].vout_uv_warn_limit = 0;
pmdev->pages[0].iout_oc_warn_limit = ADM1272_HIGH_LIMIT_DEFAULT;
pmdev->pages[0].ot_fault_limit = ADM1272_HIGH_LIMIT_DEFAULT;
pmdev->pages[0].ot_warn_limit = ADM1272_HIGH_LIMIT_DEFAULT;
pmdev->pages[0].vin_ov_warn_limit = ADM1272_HIGH_LIMIT_DEFAULT;
pmdev->pages[0].vin_uv_warn_limit = 0;
pmdev->pages[0].pin_op_warn_limit = ADM1272_PIN_OP_DEFAULT;
pmdev->pages[0].status_word = 0;
pmdev->pages[0].status_vout = 0;
pmdev->pages[0].status_iout = 0;
pmdev->pages[0].status_input = 0;
pmdev->pages[0].status_temperature = 0;
pmdev->pages[0].status_mfr_specific = 0;
pmdev->pages[0].read_vin
= adm1272_millivolts_to_direct(ADM1272_VOLT_DEFAULT);
pmdev->pages[0].read_vout
= adm1272_millivolts_to_direct(ADM1272_VOLT_DEFAULT);
pmdev->pages[0].read_iout
= adm1272_milliamps_to_direct(ADM1272_IOUT_DEFAULT);
pmdev->pages[0].read_temperature_1 = 0;
pmdev->pages[0].read_pin = adm1272_watts_to_direct(ADM1272_PWR_DEFAULT);
pmdev->pages[0].revision = ADM1272_PMBUS_REVISION_DEFAULT;
pmdev->pages[0].mfr_id = ADM1272_MFR_ID_DEFAULT;
pmdev->pages[0].mfr_model = ADM1272_MODEL_DEFAULT;
pmdev->pages[0].mfr_revision = ADM1272_MFR_DEFAULT_REVISION;
pmdev->pages[0].mfr_date = ADM1272_DEFAULT_DATE;
s->pin_ext = 0;
s->ein_ext = 0;
s->restart_time = ADM1272_RESTART_TIME_DEFAULT;
s->peak_vin = 0;
s->peak_vout = 0;
s->peak_iout = 0;
s->peak_temperature = 0;
s->peak_pin = 0;
s->pmon_control = ADM1272_PMON_CONTROL_DEFAULT;
s->pmon_config = ADM1272_PMON_CONFIG_DEFAULT;
s->alert1_config = 0;
s->alert2_config = 0;
s->device_config = ADM1272_DEVICE_CONFIG_DEFAULT;
s->hysteresis_low = 0;
s->hysteresis_high = ADM1272_HYSTERESIS_HIGH_DEFAULT;
s->status_hysteresis = 0;
s->status_gpio = 0;
s->strt_up_iout_lim = ADM1272_STRT_UP_IOUT_LIM_DEFAULT;
}
static uint8_t adm1272_read_byte(PMBusDevice *pmdev)
{
ADM1272State *s = ADM1272(pmdev);
switch (pmdev->code) {
case ADM1272_RESTART_TIME:
pmbus_send8(pmdev, s->restart_time);
break;
case ADM1272_MFR_PEAK_IOUT:
pmbus_send16(pmdev, s->peak_iout);
break;
case ADM1272_MFR_PEAK_VIN:
pmbus_send16(pmdev, s->peak_vin);
break;
case ADM1272_MFR_PEAK_VOUT:
pmbus_send16(pmdev, s->peak_vout);
break;
case ADM1272_MFR_PMON_CONTROL:
pmbus_send8(pmdev, s->pmon_control);
break;
case ADM1272_MFR_PMON_CONFIG:
pmbus_send16(pmdev, s->pmon_config);
break;
case ADM1272_MFR_ALERT1_CONFIG:
pmbus_send16(pmdev, s->alert1_config);
break;
case ADM1272_MFR_ALERT2_CONFIG:
pmbus_send16(pmdev, s->alert2_config);
break;
case ADM1272_MFR_PEAK_TEMPERATURE:
pmbus_send16(pmdev, s->peak_temperature);
break;
case ADM1272_MFR_DEVICE_CONFIG:
pmbus_send16(pmdev, s->device_config);
break;
case ADM1272_MFR_PEAK_PIN:
pmbus_send16(pmdev, s->peak_pin);
break;
case ADM1272_MFR_READ_PIN_EXT:
pmbus_send32(pmdev, s->pin_ext);
break;
case ADM1272_MFR_READ_EIN_EXT:
pmbus_send64(pmdev, s->ein_ext);
break;
case ADM1272_HYSTERESIS_LOW:
pmbus_send16(pmdev, s->hysteresis_low);
break;
case ADM1272_HYSTERESIS_HIGH:
pmbus_send16(pmdev, s->hysteresis_high);
break;
case ADM1272_STATUS_HYSTERESIS:
pmbus_send16(pmdev, s->status_hysteresis);
break;
case ADM1272_STATUS_GPIO:
pmbus_send16(pmdev, s->status_gpio);
break;
case ADM1272_STRT_UP_IOUT_LIM:
pmbus_send16(pmdev, s->strt_up_iout_lim);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: reading from unsupported register: 0x%02x\n",
__func__, pmdev->code);
return 0xFF;
break;
}
return 0;
}
static int adm1272_write_data(PMBusDevice *pmdev, const uint8_t *buf,
uint8_t len)
{
ADM1272State *s = ADM1272(pmdev);
if (len == 0) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: writing empty data\n", __func__);
return -1;
}
pmdev->code = buf[0]; /* PMBus command code */
if (len == 1) {
return 0;
}
/* Exclude command code from buffer */
buf++;
len--;
switch (pmdev->code) {
case ADM1272_RESTART_TIME:
s->restart_time = pmbus_receive8(pmdev);
break;
case ADM1272_MFR_PMON_CONTROL:
s->pmon_control = pmbus_receive8(pmdev);
break;
case ADM1272_MFR_PMON_CONFIG:
s->pmon_config = pmbus_receive16(pmdev);
break;
case ADM1272_MFR_ALERT1_CONFIG:
s->alert1_config = pmbus_receive16(pmdev);
break;
case ADM1272_MFR_ALERT2_CONFIG:
s->alert2_config = pmbus_receive16(pmdev);
break;
case ADM1272_MFR_DEVICE_CONFIG:
s->device_config = pmbus_receive16(pmdev);
break;
case ADM1272_MFR_POWER_CYCLE:
adm1272_exit_reset((Object *)s);
break;
case ADM1272_HYSTERESIS_LOW:
s->hysteresis_low = pmbus_receive16(pmdev);
break;
case ADM1272_HYSTERESIS_HIGH:
s->hysteresis_high = pmbus_receive16(pmdev);
break;
case ADM1272_STRT_UP_IOUT_LIM:
s->strt_up_iout_lim = pmbus_receive16(pmdev);
adm1272_check_limits(s);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"%s: writing to unsupported register: 0x%02x\n",
__func__, pmdev->code);
break;
}
return 0;
}
static void adm1272_get(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
uint16_t value;
if (strcmp(name, "vin") == 0 || strcmp(name, "vout") == 0) {
value = adm1272_direct_to_millivolts(*(uint16_t *)opaque);
} else if (strcmp(name, "iout") == 0) {
value = adm1272_direct_to_milliamps(*(uint16_t *)opaque);
} else if (strcmp(name, "pin") == 0) {
value = adm1272_direct_to_watts(*(uint16_t *)opaque);
} else {
value = *(uint16_t *)opaque;
}
visit_type_uint16(v, name, &value, errp);
}
static void adm1272_set(Object *obj, Visitor *v, const char *name, void *opaque,
Error **errp)
{
ADM1272State *s = ADM1272(obj);
uint16_t *internal = opaque;
uint16_t value;
if (!visit_type_uint16(v, name, &value, errp)) {
return;
}
if (strcmp(name, "vin") == 0 || strcmp(name, "vout") == 0) {
*internal = adm1272_millivolts_to_direct(value);
} else if (strcmp(name, "iout") == 0) {
*internal = adm1272_milliamps_to_direct(value);
} else if (strcmp(name, "pin") == 0) {
*internal = adm1272_watts_to_direct(value);
} else {
*internal = value;
}
adm1272_check_limits(s);
}
static const VMStateDescription vmstate_adm1272 = {
.name = "ADM1272",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]){
VMSTATE_PMBUS_DEVICE(parent, ADM1272State),
VMSTATE_UINT64(ein_ext, ADM1272State),
VMSTATE_UINT32(pin_ext, ADM1272State),
VMSTATE_UINT8(restart_time, ADM1272State),
VMSTATE_UINT16(peak_vin, ADM1272State),
VMSTATE_UINT16(peak_vout, ADM1272State),
VMSTATE_UINT16(peak_iout, ADM1272State),
VMSTATE_UINT16(peak_temperature, ADM1272State),
VMSTATE_UINT16(peak_pin, ADM1272State),
VMSTATE_UINT8(pmon_control, ADM1272State),
VMSTATE_UINT16(pmon_config, ADM1272State),
VMSTATE_UINT16(alert1_config, ADM1272State),
VMSTATE_UINT16(alert2_config, ADM1272State),
VMSTATE_UINT16(device_config, ADM1272State),
VMSTATE_UINT16(hysteresis_low, ADM1272State),
VMSTATE_UINT16(hysteresis_high, ADM1272State),
VMSTATE_UINT8(status_hysteresis, ADM1272State),
VMSTATE_UINT8(status_gpio, ADM1272State),
VMSTATE_UINT16(strt_up_iout_lim, ADM1272State),
VMSTATE_END_OF_LIST()
}
};
static void adm1272_init(Object *obj)
{
PMBusDevice *pmdev = PMBUS_DEVICE(obj);
uint64_t flags = PB_HAS_VOUT_MODE | PB_HAS_VOUT | PB_HAS_VIN | PB_HAS_IOUT |
PB_HAS_PIN | PB_HAS_TEMPERATURE | PB_HAS_MFR_INFO;
pmbus_page_config(pmdev, 0, flags);
object_property_add(obj, "vin", "uint16",
adm1272_get,
adm1272_set, NULL, &pmdev->pages[0].read_vin);
object_property_add(obj, "vout", "uint16",
adm1272_get,
adm1272_set, NULL, &pmdev->pages[0].read_vout);
object_property_add(obj, "iout", "uint16",
adm1272_get,
adm1272_set, NULL, &pmdev->pages[0].read_iout);
object_property_add(obj, "pin", "uint16",
adm1272_get,
adm1272_set, NULL, &pmdev->pages[0].read_pin);
}
static void adm1272_class_init(ObjectClass *klass, void *data)
{
ResettableClass *rc = RESETTABLE_CLASS(klass);
DeviceClass *dc = DEVICE_CLASS(klass);
PMBusDeviceClass *k = PMBUS_DEVICE_CLASS(klass);
dc->desc = "Analog Devices ADM1272 Hot Swap controller";
dc->vmsd = &vmstate_adm1272;
k->write_data = adm1272_write_data;
k->receive_byte = adm1272_read_byte;
k->device_num_pages = 1;
rc->phases.exit = adm1272_exit_reset;
}
static const TypeInfo adm1272_info = {
.name = TYPE_ADM1272,
.parent = TYPE_PMBUS_DEVICE,
.instance_size = sizeof(ADM1272State),
.instance_init = adm1272_init,
.class_init = adm1272_class_init,
};
static void adm1272_register_types(void)
{
type_register_static(&adm1272_info);
}
type_init(adm1272_register_types)
Reference in New Issue View Git Blame Copy Permalink