qemu-e2k/hw/xen/xen_pt.h
Jan Beulich b38ec5ee7a xen/MSI-X: limit error messages
Limit error messages resulting from bad guest behavior to avoid allowing
the guest to cause the control domain's disk to fill.

The first message in pci_msix_write() can simply be deleted, as this
is indeed bad guest behavior, but such out of bounds writes don't
really need to be logged.

The second one is more problematic, as there guest behavior may only
appear to be wrong: For one, the old logic didn't take the mask-all bit
into account. And then this shouldn't depend on host device state (i.e.
the host may have masked the entry without the guest having done so).
Plus these writes shouldn't be dropped even when an entry is unmasked.
Instead, if they can't be made take effect right away, they should take
effect on the next unmasking or enabling operation - the specification
explicitly describes such caching behavior. Until we can validly drop
the message (implementing such caching/latching behavior), issue the
message just once per MSI-X table entry.

Note that the log message in pci_msix_read() similar to the one being
removed here is not an issue: "addr" being of unsigned type, and the
maximum size of the MSI-X table being 32k, entry_nr simply can't be
negative and hence the conditonal guarding issuing of the message will
never be true.

This is XSA-130.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-02 15:07:00 +00:00

302 lines
8.8 KiB
C

#ifndef XEN_PT_H
#define XEN_PT_H
#include "qemu-common.h"
#include "hw/xen/xen_common.h"
#include "hw/pci/pci.h"
#include "xen-host-pci-device.h"
void xen_pt_log(const PCIDevice *d, const char *f, ...) GCC_FMT_ATTR(2, 3);
#define XEN_PT_ERR(d, _f, _a...) xen_pt_log(d, "%s: Error: "_f, __func__, ##_a)
#ifdef XEN_PT_LOGGING_ENABLED
# define XEN_PT_LOG(d, _f, _a...) xen_pt_log(d, "%s: " _f, __func__, ##_a)
# define XEN_PT_WARN(d, _f, _a...) \
xen_pt_log(d, "%s: Warning: "_f, __func__, ##_a)
#else
# define XEN_PT_LOG(d, _f, _a...)
# define XEN_PT_WARN(d, _f, _a...)
#endif
#ifdef XEN_PT_DEBUG_PCI_CONFIG_ACCESS
# define XEN_PT_LOG_CONFIG(d, addr, val, len) \
xen_pt_log(d, "%s: address=0x%04x val=0x%08x len=%d\n", \
__func__, addr, val, len)
#else
# define XEN_PT_LOG_CONFIG(d, addr, val, len)
#endif
/* Helper */
#define XEN_PFN(x) ((x) >> XC_PAGE_SHIFT)
typedef struct XenPTRegInfo XenPTRegInfo;
typedef struct XenPTReg XenPTReg;
typedef struct XenPCIPassthroughState XenPCIPassthroughState;
/* function type for config reg */
typedef int (*xen_pt_conf_reg_init)
(XenPCIPassthroughState *, XenPTRegInfo *, uint32_t real_offset,
uint32_t *data);
typedef int (*xen_pt_conf_dword_write)
(XenPCIPassthroughState *, XenPTReg *cfg_entry,
uint32_t *val, uint32_t dev_value, uint32_t valid_mask);
typedef int (*xen_pt_conf_word_write)
(XenPCIPassthroughState *, XenPTReg *cfg_entry,
uint16_t *val, uint16_t dev_value, uint16_t valid_mask);
typedef int (*xen_pt_conf_byte_write)
(XenPCIPassthroughState *, XenPTReg *cfg_entry,
uint8_t *val, uint8_t dev_value, uint8_t valid_mask);
typedef int (*xen_pt_conf_dword_read)
(XenPCIPassthroughState *, XenPTReg *cfg_entry,
uint32_t *val, uint32_t valid_mask);
typedef int (*xen_pt_conf_word_read)
(XenPCIPassthroughState *, XenPTReg *cfg_entry,
uint16_t *val, uint16_t valid_mask);
typedef int (*xen_pt_conf_byte_read)
(XenPCIPassthroughState *, XenPTReg *cfg_entry,
uint8_t *val, uint8_t valid_mask);
#define XEN_PT_BAR_ALLF 0xFFFFFFFF
#define XEN_PT_BAR_UNMAPPED (-1)
#define PCI_CAP_MAX 48
typedef enum {
XEN_PT_GRP_TYPE_HARDWIRED = 0, /* 0 Hardwired reg group */
XEN_PT_GRP_TYPE_EMU, /* emul reg group */
} XenPTRegisterGroupType;
typedef enum {
XEN_PT_BAR_FLAG_MEM = 0, /* Memory type BAR */
XEN_PT_BAR_FLAG_IO, /* I/O type BAR */
XEN_PT_BAR_FLAG_UPPER, /* upper 64bit BAR */
XEN_PT_BAR_FLAG_UNUSED, /* unused BAR */
} XenPTBarFlag;
typedef struct XenPTRegion {
/* BAR flag */
XenPTBarFlag bar_flag;
/* Translation of the emulated address */
union {
uint64_t maddr;
uint64_t pio_base;
uint64_t u;
} access;
} XenPTRegion;
/* XenPTRegInfo declaration
* - only for emulated register (either a part or whole bit).
* - for passthrough register that need special behavior (like interacting with
* other component), set emu_mask to all 0 and specify r/w func properly.
* - do NOT use ALL F for init_val, otherwise the tbl will not be registered.
*/
/* emulated register information */
struct XenPTRegInfo {
uint32_t offset;
uint32_t size;
uint32_t init_val;
/* reg read only field mask (ON:RO/ROS, OFF:other) */
uint32_t ro_mask;
/* reg emulate field mask (ON:emu, OFF:passthrough) */
uint32_t emu_mask;
xen_pt_conf_reg_init init;
/* read/write function pointer
* for double_word/word/byte size */
union {
struct {
xen_pt_conf_dword_write write;
xen_pt_conf_dword_read read;
} dw;
struct {
xen_pt_conf_word_write write;
xen_pt_conf_word_read read;
} w;
struct {
xen_pt_conf_byte_write write;
xen_pt_conf_byte_read read;
} b;
} u;
};
/* emulated register management */
struct XenPTReg {
QLIST_ENTRY(XenPTReg) entries;
XenPTRegInfo *reg;
uint32_t data; /* emulated value */
};
typedef struct XenPTRegGroupInfo XenPTRegGroupInfo;
/* emul reg group size initialize method */
typedef int (*xen_pt_reg_size_init_fn)
(XenPCIPassthroughState *, const XenPTRegGroupInfo *,
uint32_t base_offset, uint8_t *size);
/* emulated register group information */
struct XenPTRegGroupInfo {
uint8_t grp_id;
XenPTRegisterGroupType grp_type;
uint8_t grp_size;
xen_pt_reg_size_init_fn size_init;
XenPTRegInfo *emu_regs;
};
/* emul register group management table */
typedef struct XenPTRegGroup {
QLIST_ENTRY(XenPTRegGroup) entries;
const XenPTRegGroupInfo *reg_grp;
uint32_t base_offset;
uint8_t size;
QLIST_HEAD(, XenPTReg) reg_tbl_list;
} XenPTRegGroup;
#define XEN_PT_UNASSIGNED_PIRQ (-1)
typedef struct XenPTMSI {
uint16_t flags;
uint32_t addr_lo; /* guest message address */
uint32_t addr_hi; /* guest message upper address */
uint16_t data; /* guest message data */
uint32_t ctrl_offset; /* saved control offset */
int pirq; /* guest pirq corresponding */
bool initialized; /* when guest MSI is initialized */
bool mapped; /* when pirq is mapped */
} XenPTMSI;
typedef struct XenPTMSIXEntry {
int pirq;
uint64_t addr;
uint32_t data;
uint32_t vector_ctrl;
bool updated; /* indicate whether MSI ADDR or DATA is updated */
bool warned; /* avoid issuing (bogus) warning more than once */
} XenPTMSIXEntry;
typedef struct XenPTMSIX {
uint32_t ctrl_offset;
bool enabled;
int total_entries;
int bar_index;
uint64_t table_base;
uint32_t table_offset_adjust; /* page align mmap */
uint64_t mmio_base_addr;
MemoryRegion mmio;
void *phys_iomem_base;
XenPTMSIXEntry msix_entry[0];
} XenPTMSIX;
struct XenPCIPassthroughState {
PCIDevice dev;
PCIHostDeviceAddress hostaddr;
bool is_virtfn;
XenHostPCIDevice real_device;
XenPTRegion bases[PCI_NUM_REGIONS]; /* Access regions */
QLIST_HEAD(, XenPTRegGroup) reg_grps;
uint32_t machine_irq;
XenPTMSI *msi;
XenPTMSIX *msix;
MemoryRegion bar[PCI_NUM_REGIONS - 1];
MemoryRegion rom;
MemoryListener memory_listener;
MemoryListener io_listener;
};
int xen_pt_config_init(XenPCIPassthroughState *s);
void xen_pt_config_delete(XenPCIPassthroughState *s);
XenPTRegGroup *xen_pt_find_reg_grp(XenPCIPassthroughState *s, uint32_t address);
XenPTReg *xen_pt_find_reg(XenPTRegGroup *reg_grp, uint32_t address);
int xen_pt_bar_offset_to_index(uint32_t offset);
static inline pcibus_t xen_pt_get_emul_size(XenPTBarFlag flag, pcibus_t r_size)
{
/* align resource size (memory type only) */
if (flag == XEN_PT_BAR_FLAG_MEM) {
return (r_size + XC_PAGE_SIZE - 1) & XC_PAGE_MASK;
} else {
return r_size;
}
}
/* INTx */
/* The PCI Local Bus Specification, Rev. 3.0,
* Section 6.2.4 Miscellaneous Registers, pp 223
* outlines 5 valid values for the interrupt pin (intx).
* 0: For devices (or device functions) that don't use an interrupt in
* 1: INTA#
* 2: INTB#
* 3: INTC#
* 4: INTD#
*
* Xen uses the following 4 values for intx
* 0: INTA#
* 1: INTB#
* 2: INTC#
* 3: INTD#
*
* Observing that these list of values are not the same, xen_pt_pci_read_intx()
* uses the following mapping from hw to xen values.
* This seems to reflect the current usage within Xen.
*
* PCI hardware | Xen | Notes
* ----------------+-----+----------------------------------------------------
* 0 | 0 | No interrupt
* 1 | 0 | INTA#
* 2 | 1 | INTB#
* 3 | 2 | INTC#
* 4 | 3 | INTD#
* any other value | 0 | This should never happen, log error message
*/
static inline uint8_t xen_pt_pci_read_intx(XenPCIPassthroughState *s)
{
uint8_t v = 0;
xen_host_pci_get_byte(&s->real_device, PCI_INTERRUPT_PIN, &v);
return v;
}
static inline uint8_t xen_pt_pci_intx(XenPCIPassthroughState *s)
{
uint8_t r_val = xen_pt_pci_read_intx(s);
XEN_PT_LOG(&s->dev, "intx=%i\n", r_val);
if (r_val < 1 || r_val > 4) {
XEN_PT_LOG(&s->dev, "Interrupt pin read from hardware is out of range:"
" value=%i, acceptable range is 1 - 4\n", r_val);
r_val = 0;
} else {
r_val -= 1;
}
return r_val;
}
/* MSI/MSI-X */
int xen_pt_msi_set_enable(XenPCIPassthroughState *s, bool en);
int xen_pt_msi_setup(XenPCIPassthroughState *s);
int xen_pt_msi_update(XenPCIPassthroughState *d);
void xen_pt_msi_disable(XenPCIPassthroughState *s);
int xen_pt_msix_init(XenPCIPassthroughState *s, uint32_t base);
void xen_pt_msix_delete(XenPCIPassthroughState *s);
int xen_pt_msix_update(XenPCIPassthroughState *s);
int xen_pt_msix_update_remap(XenPCIPassthroughState *s, int bar_index);
void xen_pt_msix_disable(XenPCIPassthroughState *s);
static inline bool xen_pt_has_msix_mapping(XenPCIPassthroughState *s, int bar)
{
return s->msix && s->msix->bar_index == bar;
}
#endif /* !XEN_PT_H */