qemu-e2k/hw/timer/puv3_ost.c
Dmitry Osipenko e7ea81c37d hw/ptimer: Introduce timer policy feature
Some of the timer devices may behave differently from what ptimer
provides. Introduce ptimer policy feature that allows ptimer users to
change default and wrong timer behaviour, for example to continuously
trigger periodic timer when load value is equal to "0".

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Message-id: 994cd608ec392da6e58f0643800dda595edb9d97.1473252818.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-22 18:13:06 +01:00

158 lines
3.8 KiB
C

/*
* OSTimer device simulation in PKUnity SoC
*
* Copyright (C) 2010-2012 Guan Xuetao
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation, or any later version.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "hw/sysbus.h"
#include "hw/ptimer.h"
#include "qemu/main-loop.h"
#undef DEBUG_PUV3
#include "hw/unicore32/puv3.h"
#define TYPE_PUV3_OST "puv3_ost"
#define PUV3_OST(obj) OBJECT_CHECK(PUV3OSTState, (obj), TYPE_PUV3_OST)
/* puv3 ostimer implementation. */
typedef struct PUV3OSTState {
SysBusDevice parent_obj;
MemoryRegion iomem;
QEMUBH *bh;
qemu_irq irq;
ptimer_state *ptimer;
uint32_t reg_OSMR0;
uint32_t reg_OSCR;
uint32_t reg_OSSR;
uint32_t reg_OIER;
} PUV3OSTState;
static uint64_t puv3_ost_read(void *opaque, hwaddr offset,
unsigned size)
{
PUV3OSTState *s = opaque;
uint32_t ret = 0;
switch (offset) {
case 0x10: /* Counter Register */
ret = s->reg_OSMR0 - (uint32_t)ptimer_get_count(s->ptimer);
break;
case 0x14: /* Status Register */
ret = s->reg_OSSR;
break;
case 0x1c: /* Interrupt Enable Register */
ret = s->reg_OIER;
break;
default:
DPRINTF("Bad offset %x\n", (int)offset);
}
DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
return ret;
}
static void puv3_ost_write(void *opaque, hwaddr offset,
uint64_t value, unsigned size)
{
PUV3OSTState *s = opaque;
DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
switch (offset) {
case 0x00: /* Match Register 0 */
s->reg_OSMR0 = value;
if (s->reg_OSMR0 > s->reg_OSCR) {
ptimer_set_count(s->ptimer, s->reg_OSMR0 - s->reg_OSCR);
} else {
ptimer_set_count(s->ptimer, s->reg_OSMR0 +
(0xffffffff - s->reg_OSCR));
}
ptimer_run(s->ptimer, 2);
break;
case 0x14: /* Status Register */
assert(value == 0);
if (s->reg_OSSR) {
s->reg_OSSR = value;
qemu_irq_lower(s->irq);
}
break;
case 0x1c: /* Interrupt Enable Register */
s->reg_OIER = value;
break;
default:
DPRINTF("Bad offset %x\n", (int)offset);
}
}
static const MemoryRegionOps puv3_ost_ops = {
.read = puv3_ost_read,
.write = puv3_ost_write,
.impl = {
.min_access_size = 4,
.max_access_size = 4,
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
static void puv3_ost_tick(void *opaque)
{
PUV3OSTState *s = opaque;
DPRINTF("ost hit when ptimer counter from 0x%x to 0x%x!\n",
s->reg_OSCR, s->reg_OSMR0);
s->reg_OSCR = s->reg_OSMR0;
if (s->reg_OIER) {
s->reg_OSSR = 1;
qemu_irq_raise(s->irq);
}
}
static int puv3_ost_init(SysBusDevice *dev)
{
PUV3OSTState *s = PUV3_OST(dev);
s->reg_OIER = 0;
s->reg_OSSR = 0;
s->reg_OSMR0 = 0;
s->reg_OSCR = 0;
sysbus_init_irq(dev, &s->irq);
s->bh = qemu_bh_new(puv3_ost_tick, s);
s->ptimer = ptimer_init(s->bh, PTIMER_POLICY_DEFAULT);
ptimer_set_freq(s->ptimer, 50 * 1000 * 1000);
memory_region_init_io(&s->iomem, OBJECT(s), &puv3_ost_ops, s, "puv3_ost",
PUV3_REGS_OFFSET);
sysbus_init_mmio(dev, &s->iomem);
return 0;
}
static void puv3_ost_class_init(ObjectClass *klass, void *data)
{
SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
sdc->init = puv3_ost_init;
}
static const TypeInfo puv3_ost_info = {
.name = TYPE_PUV3_OST,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(PUV3OSTState),
.class_init = puv3_ost_class_init,
};
static void puv3_ost_register_type(void)
{
type_register_static(&puv3_ost_info);
}
type_init(puv3_ost_register_type)