264 lines
6.4 KiB
Plaintext
264 lines
6.4 KiB
Plaintext
@node ARM System emulator
|
||
@section ARM System emulator
|
||
|
||
Use the executable @file{qemu-system-arm} to simulate a ARM
|
||
machine. The ARM Integrator/CP board is emulated with the following
|
||
devices:
|
||
|
||
@itemize @minus
|
||
@item
|
||
ARM926E, ARM1026E, ARM946E, ARM1136 or Cortex-A8 CPU
|
||
@item
|
||
Two PL011 UARTs
|
||
@item
|
||
SMC 91c111 Ethernet adapter
|
||
@item
|
||
PL110 LCD controller
|
||
@item
|
||
PL050 KMI with PS/2 keyboard and mouse.
|
||
@item
|
||
PL181 MultiMedia Card Interface with SD card.
|
||
@end itemize
|
||
|
||
The ARM Versatile baseboard is emulated with the following devices:
|
||
|
||
@itemize @minus
|
||
@item
|
||
ARM926E, ARM1136 or Cortex-A8 CPU
|
||
@item
|
||
PL190 Vectored Interrupt Controller
|
||
@item
|
||
Four PL011 UARTs
|
||
@item
|
||
SMC 91c111 Ethernet adapter
|
||
@item
|
||
PL110 LCD controller
|
||
@item
|
||
PL050 KMI with PS/2 keyboard and mouse.
|
||
@item
|
||
PCI host bridge. Note the emulated PCI bridge only provides access to
|
||
PCI memory space. It does not provide access to PCI IO space.
|
||
This means some devices (eg. ne2k_pci NIC) are not usable, and others
|
||
(eg. rtl8139 NIC) are only usable when the guest drivers use the memory
|
||
mapped control registers.
|
||
@item
|
||
PCI OHCI USB controller.
|
||
@item
|
||
LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM devices.
|
||
@item
|
||
PL181 MultiMedia Card Interface with SD card.
|
||
@end itemize
|
||
|
||
Several variants of the ARM RealView baseboard are emulated,
|
||
including the EB, PB-A8 and PBX-A9. Due to interactions with the
|
||
bootloader, only certain Linux kernel configurations work out
|
||
of the box on these boards.
|
||
|
||
Kernels for the PB-A8 board should have CONFIG_REALVIEW_HIGH_PHYS_OFFSET
|
||
enabled in the kernel, and expect 512M RAM. Kernels for The PBX-A9 board
|
||
should have CONFIG_SPARSEMEM enabled, CONFIG_REALVIEW_HIGH_PHYS_OFFSET
|
||
disabled and expect 1024M RAM.
|
||
|
||
The following devices are emulated:
|
||
|
||
@itemize @minus
|
||
@item
|
||
ARM926E, ARM1136, ARM11MPCore, Cortex-A8 or Cortex-A9 MPCore CPU
|
||
@item
|
||
ARM AMBA Generic/Distributed Interrupt Controller
|
||
@item
|
||
Four PL011 UARTs
|
||
@item
|
||
SMC 91c111 or SMSC LAN9118 Ethernet adapter
|
||
@item
|
||
PL110 LCD controller
|
||
@item
|
||
PL050 KMI with PS/2 keyboard and mouse
|
||
@item
|
||
PCI host bridge
|
||
@item
|
||
PCI OHCI USB controller
|
||
@item
|
||
LSI53C895A PCI SCSI Host Bus Adapter with hard disk and CD-ROM devices
|
||
@item
|
||
PL181 MultiMedia Card Interface with SD card.
|
||
@end itemize
|
||
|
||
The XScale-based clamshell PDA models ("Spitz", "Akita", "Borzoi"
|
||
and "Terrier") emulation includes the following peripherals:
|
||
|
||
@itemize @minus
|
||
@item
|
||
Intel PXA270 System-on-chip (ARM V5TE core)
|
||
@item
|
||
NAND Flash memory
|
||
@item
|
||
IBM/Hitachi DSCM microdrive in a PXA PCMCIA slot - not in "Akita"
|
||
@item
|
||
On-chip OHCI USB controller
|
||
@item
|
||
On-chip LCD controller
|
||
@item
|
||
On-chip Real Time Clock
|
||
@item
|
||
TI ADS7846 touchscreen controller on SSP bus
|
||
@item
|
||
Maxim MAX1111 analog-digital converter on I@math{^2}C bus
|
||
@item
|
||
GPIO-connected keyboard controller and LEDs
|
||
@item
|
||
Secure Digital card connected to PXA MMC/SD host
|
||
@item
|
||
Three on-chip UARTs
|
||
@item
|
||
WM8750 audio CODEC on I@math{^2}C and I@math{^2}S busses
|
||
@end itemize
|
||
|
||
The Palm Tungsten|E PDA (codename "Cheetah") emulation includes the
|
||
following elements:
|
||
|
||
@itemize @minus
|
||
@item
|
||
Texas Instruments OMAP310 System-on-chip (ARM 925T core)
|
||
@item
|
||
ROM and RAM memories (ROM firmware image can be loaded with -option-rom)
|
||
@item
|
||
On-chip LCD controller
|
||
@item
|
||
On-chip Real Time Clock
|
||
@item
|
||
TI TSC2102i touchscreen controller / analog-digital converter / Audio
|
||
CODEC, connected through MicroWire and I@math{^2}S busses
|
||
@item
|
||
GPIO-connected matrix keypad
|
||
@item
|
||
Secure Digital card connected to OMAP MMC/SD host
|
||
@item
|
||
Three on-chip UARTs
|
||
@end itemize
|
||
|
||
Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 / 48)
|
||
emulation supports the following elements:
|
||
|
||
@itemize @minus
|
||
@item
|
||
Texas Instruments OMAP2420 System-on-chip (ARM 1136 core)
|
||
@item
|
||
RAM and non-volatile OneNAND Flash memories
|
||
@item
|
||
Display connected to EPSON remote framebuffer chip and OMAP on-chip
|
||
display controller and a LS041y3 MIPI DBI-C controller
|
||
@item
|
||
TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen controllers
|
||
driven through SPI bus
|
||
@item
|
||
National Semiconductor LM8323-controlled qwerty keyboard driven
|
||
through I@math{^2}C bus
|
||
@item
|
||
Secure Digital card connected to OMAP MMC/SD host
|
||
@item
|
||
Three OMAP on-chip UARTs and on-chip STI debugging console
|
||
@item
|
||
Mentor Graphics "Inventra" dual-role USB controller embedded in a TI
|
||
TUSB6010 chip - only USB host mode is supported
|
||
@item
|
||
TI TMP105 temperature sensor driven through I@math{^2}C bus
|
||
@item
|
||
TI TWL92230C power management companion with an RTC on I@math{^2}C bus
|
||
@item
|
||
Nokia RETU and TAHVO multi-purpose chips with an RTC, connected
|
||
through CBUS
|
||
@end itemize
|
||
|
||
The Luminary Micro Stellaris LM3S811EVB emulation includes the following
|
||
devices:
|
||
|
||
@itemize @minus
|
||
@item
|
||
Cortex-M3 CPU core.
|
||
@item
|
||
64k Flash and 8k SRAM.
|
||
@item
|
||
Timers, UARTs, ADC and I@math{^2}C interface.
|
||
@item
|
||
OSRAM Pictiva 96x16 OLED with SSD0303 controller on I@math{^2}C bus.
|
||
@end itemize
|
||
|
||
The Luminary Micro Stellaris LM3S6965EVB emulation includes the following
|
||
devices:
|
||
|
||
@itemize @minus
|
||
@item
|
||
Cortex-M3 CPU core.
|
||
@item
|
||
256k Flash and 64k SRAM.
|
||
@item
|
||
Timers, UARTs, ADC, I@math{^2}C and SSI interfaces.
|
||
@item
|
||
OSRAM Pictiva 128x64 OLED with SSD0323 controller connected via SSI.
|
||
@end itemize
|
||
|
||
The Freecom MusicPal internet radio emulation includes the following
|
||
elements:
|
||
|
||
@itemize @minus
|
||
@item
|
||
Marvell MV88W8618 ARM core.
|
||
@item
|
||
32 MB RAM, 256 KB SRAM, 8 MB flash.
|
||
@item
|
||
Up to 2 16550 UARTs
|
||
@item
|
||
MV88W8xx8 Ethernet controller
|
||
@item
|
||
MV88W8618 audio controller, WM8750 CODEC and mixer
|
||
@item
|
||
128×64 display with brightness control
|
||
@item
|
||
2 buttons, 2 navigation wheels with button function
|
||
@end itemize
|
||
|
||
The Siemens SX1 models v1 and v2 (default) basic emulation.
|
||
The emulation includes the following elements:
|
||
|
||
@itemize @minus
|
||
@item
|
||
Texas Instruments OMAP310 System-on-chip (ARM 925T core)
|
||
@item
|
||
ROM and RAM memories (ROM firmware image can be loaded with -pflash)
|
||
V1
|
||
1 Flash of 16MB and 1 Flash of 8MB
|
||
V2
|
||
1 Flash of 32MB
|
||
@item
|
||
On-chip LCD controller
|
||
@item
|
||
On-chip Real Time Clock
|
||
@item
|
||
Secure Digital card connected to OMAP MMC/SD host
|
||
@item
|
||
Three on-chip UARTs
|
||
@end itemize
|
||
|
||
A Linux 2.6 test image is available on the QEMU web site. More
|
||
information is available in the QEMU mailing-list archive.
|
||
|
||
@c man begin OPTIONS
|
||
|
||
The following options are specific to the ARM emulation:
|
||
|
||
@table @option
|
||
|
||
@item -semihosting
|
||
Enable semihosting syscall emulation.
|
||
|
||
On ARM this implements the "Angel" interface.
|
||
|
||
Note that this allows guest direct access to the host filesystem,
|
||
so should only be used with trusted guest OS.
|
||
|
||
@end table
|
||
|
||
@c man end
|
||
|