qemu-e2k/docs/system/devices/igb.rst
Akihiko Odaki 136e9dbad8 docs/system/devices/igb: Add igb documentation
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-03-10 17:26:47 +08:00

72 lines
2.2 KiB
ReStructuredText

.. SPDX-License-Identifier: GPL-2.0-or-later
.. _igb:
igb
---
igb is a family of Intel's gigabit ethernet controllers. In QEMU, 82576
emulation is implemented in particular. Its datasheet is available at [1]_.
This implementation is expected to be useful to test SR-IOV networking without
requiring physical hardware.
Limitations
===========
This igb implementation was tested with Linux Test Project [2]_ and Windows HLK
[3]_ during the initial development. The command used when testing with LTP is:
.. code-block:: shell
network.sh -6mta
Be aware that this implementation lacks many functionalities available with the
actual hardware, and you may experience various failures if you try to use it
with a different operating system other than Linux and Windows or if you try
functionalities not covered by the tests.
Using igb
=========
Using igb should be nothing different from using another network device. See
:ref:`pcsys_005fnetwork` in general.
However, you may also need to perform additional steps to activate SR-IOV
feature on your guest. For Linux, refer to [4]_.
Developing igb
==============
igb is the successor of e1000e, and e1000e is the successor of e1000 in turn.
As these devices are very similar, if you make a change for igb and the same
change can be applied to e1000e and e1000, please do so.
Please do not forget to run tests before submitting a change. As tests included
in QEMU is very minimal, run some application which is likely to be affected by
the change to confirm it works in an integrated system.
Testing igb
===========
A qtest of the basic functionality is available. Run the below at the build
directory:
.. code-block:: shell
meson test qtest-x86_64/qos-test
ethtool can test register accesses, interrupts, etc. It is automated as an
Avocado test and can be ran with the following command:
.. code:: shell
make check-avocado AVOCADO_TESTS=tests/avocado/igb.py
References
==========
.. [1] https://www.intel.com/content/dam/www/public/us/en/documents/datasheets/82576eb-gigabit-ethernet-controller-datasheet.pdf
.. [2] https://github.com/linux-test-project/ltp
.. [3] https://learn.microsoft.com/en-us/windows-hardware/test/hlk/
.. [4] https://docs.kernel.org/PCI/pci-iov-howto.html