qemu-e2k/linux-user/arm/nwfpe/fpopcode.h
Blue Swirl d4fa8d909c Export tables properly to avoid a Sparse warning
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-21 18:40:57 +00:00

392 lines
14 KiB
C
Raw Blame History

/*
NetWinder Floating Point Emulator
(c) Rebel.COM, 1998,1999
Direct questions, comments to Scott Bambrough <scottb@netwinder.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef __FPOPCODE_H__
#define __FPOPCODE_H__
/*
ARM Floating Point Instruction Classes
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|c o n d|1 1 0 P|U|u|W|L| Rn |v| Fd |0|0|0|1| o f f s e t | CPDT
|c o n d|1 1 0 P|U|w|W|L| Rn |x| Fd |0|0|0|1| o f f s e t | CPDT
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
|c o n d|1 1 1 0|a|b|c|d|e| Fn |j| Fd |0|0|0|1|f|g|h|0|i| Fm | CPDO
|c o n d|1 1 1 0|a|b|c|L|e| Fn | Rd |0|0|0|1|f|g|h|1|i| Fm | CPRT
|c o n d|1 1 1 0|a|b|c|1|e| Fn |1|1|1|1|0|0|0|1|f|g|h|1|i| Fm | comparisons
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
CPDT data transfer instructions
LDF, STF, LFM, SFM
CPDO dyadic arithmetic instructions
ADF, MUF, SUF, RSF, DVF, RDF,
POW, RPW, RMF, FML, FDV, FRD, POL
CPDO monadic arithmetic instructions
MVF, MNF, ABS, RND, SQT, LOG, LGN, EXP,
SIN, COS, TAN, ASN, ACS, ATN, URD, NRM
CPRT joint arithmetic/data transfer instructions
FIX (arithmetic followed by load/store)
FLT (load/store followed by arithmetic)
CMF, CNF CMFE, CNFE (comparisons)
WFS, RFS (write/read floating point status register)
WFC, RFC (write/read floating point control register)
cond condition codes
P pre/post index bit: 0 = postindex, 1 = preindex
U up/down bit: 0 = stack grows down, 1 = stack grows up
W write back bit: 1 = update base register (Rn)
L load/store bit: 0 = store, 1 = load
Rn base register
Rd destination/source register
Fd floating point destination register
Fn floating point source register
Fm floating point source register or floating point constant
uv transfer length (TABLE 1)
wx register count (TABLE 2)
abcd arithmetic opcode (TABLES 3 & 4)
ef destination size (rounding precision) (TABLE 5)
gh rounding mode (TABLE 6)
j dyadic/monadic bit: 0 = dyadic, 1 = monadic
i constant bit: 1 = constant (TABLE 6)
*/
/*
TABLE 1
+-------------------------+---+---+---------+---------+
| Precision | u | v | FPSR.EP | length |
+-------------------------+---+---+---------+---------+
| Single | 0 <20> 0 | x | 1 words |
| Double | 1 <20> 1 | x | 2 words |
| Extended | 1 <20> 1 | x | 3 words |
| Packed decimal | 1 <20> 1 | 0 | 3 words |
| Expanded packed decimal | 1 <20> 1 | 1 | 4 words |
+-------------------------+---+---+---------+---------+
Note: x = don't care
*/
/*
TABLE 2
+---+---+---------------------------------+
| w | x | Number of registers to transfer |
+---+---+---------------------------------+
| 0 <20> 1 | 1 |
| 1 <20> 0 | 2 |
| 1 <20> 1 | 3 |
| 0 <20> 0 | 4 |
+---+---+---------------------------------+
*/
/*
TABLE 3: Dyadic Floating Point Opcodes
+---+---+---+---+----------+-----------------------+-----------------------+
| a | b | c | d | Mnemonic | Description | Operation |
+---+---+---+---+----------+-----------------------+-----------------------+
| 0 | 0 | 0 | 0 | ADF | Add | Fd := Fn + Fm |
| 0 | 0 | 0 | 1 | MUF | Multiply | Fd := Fn * Fm |
| 0 | 0 | 1 | 0 | SUF | Subtract | Fd := Fn - Fm |
| 0 | 0 | 1 | 1 | RSF | Reverse subtract | Fd := Fm - Fn |
| 0 | 1 | 0 | 0 | DVF | Divide | Fd := Fn / Fm |
| 0 | 1 | 0 | 1 | RDF | Reverse divide | Fd := Fm / Fn |
| 0 | 1 | 1 | 0 | POW | Power | Fd := Fn ^ Fm |
| 0 | 1 | 1 | 1 | RPW | Reverse power | Fd := Fm ^ Fn |
| 1 | 0 | 0 | 0 | RMF | Remainder | Fd := IEEE rem(Fn/Fm) |
| 1 | 0 | 0 | 1 | FML | Fast Multiply | Fd := Fn * Fm |
| 1 | 0 | 1 | 0 | FDV | Fast Divide | Fd := Fn / Fm |
| 1 | 0 | 1 | 1 | FRD | Fast reverse divide | Fd := Fm / Fn |
| 1 | 1 | 0 | 0 | POL | Polar angle (ArcTan2) | Fd := arctan2(Fn,Fm) |
| 1 | 1 | 0 | 1 | | undefined instruction | trap |
| 1 | 1 | 1 | 0 | | undefined instruction | trap |
| 1 | 1 | 1 | 1 | | undefined instruction | trap |
+---+---+---+---+----------+-----------------------+-----------------------+
Note: POW, RPW, POL are deprecated, and are available for backwards
compatibility only.
*/
/*
TABLE 4: Monadic Floating Point Opcodes
+---+---+---+---+----------+-----------------------+-----------------------+
| a | b | c | d | Mnemonic | Description | Operation |
+---+---+---+---+----------+-----------------------+-----------------------+
| 0 | 0 | 0 | 0 | MVF | Move | Fd := Fm |
| 0 | 0 | 0 | 1 | MNF | Move negated | Fd := - Fm |
| 0 | 0 | 1 | 0 | ABS | Absolute value | Fd := abs(Fm) |
| 0 | 0 | 1 | 1 | RND | Round to integer | Fd := int(Fm) |
| 0 | 1 | 0 | 0 | SQT | Square root | Fd := sqrt(Fm) |
| 0 | 1 | 0 | 1 | LOG | Log base 10 | Fd := log10(Fm) |
| 0 | 1 | 1 | 0 | LGN | Log base e | Fd := ln(Fm) |
| 0 | 1 | 1 | 1 | EXP | Exponent | Fd := e ^ Fm |
| 1 | 0 | 0 | 0 | SIN | Sine | Fd := sin(Fm) |
| 1 | 0 | 0 | 1 | COS | Cosine | Fd := cos(Fm) |
| 1 | 0 | 1 | 0 | TAN | Tangent | Fd := tan(Fm) |
| 1 | 0 | 1 | 1 | ASN | Arc Sine | Fd := arcsin(Fm) |
| 1 | 1 | 0 | 0 | ACS | Arc Cosine | Fd := arccos(Fm) |
| 1 | 1 | 0 | 1 | ATN | Arc Tangent | Fd := arctan(Fm) |
| 1 | 1 | 1 | 0 | URD | Unnormalized round | Fd := int(Fm) |
| 1 | 1 | 1 | 1 | NRM | Normalize | Fd := norm(Fm) |
+---+---+---+---+----------+-----------------------+-----------------------+
Note: LOG, LGN, EXP, SIN, COS, TAN, ASN, ACS, ATN are deprecated, and are
available for backwards compatibility only.
*/
/*
TABLE 5
+-------------------------+---+---+
| Rounding Precision | e | f |
+-------------------------+---+---+
| IEEE Single precision | 0 <20> 0 |
| IEEE Double precision | 0 <20> 1 |
| IEEE Extended precision | 1 <20> 0 |
| undefined (trap) | 1 <20> 1 |
+-------------------------+---+---+
*/
/*
TABLE 5
+---------------------------------+---+---+
| Rounding Mode | g | h |
+---------------------------------+---+---+
| Round to nearest (default) | 0 <20> 0 |
| Round toward plus infinity | 0 <20> 1 |
| Round toward negative infinity | 1 <20> 0 |
| Round toward zero | 1 <20> 1 |
+---------------------------------+---+---+
*/
/*
===
=== Definitions for load and store instructions
===
*/
/* bit masks */
#define BIT_PREINDEX 0x01000000
#define BIT_UP 0x00800000
#define BIT_WRITE_BACK 0x00200000
#define BIT_LOAD 0x00100000
/* masks for load/store */
#define MASK_CPDT 0x0c000000 /* data processing opcode */
#define MASK_OFFSET 0x000000ff
#define MASK_TRANSFER_LENGTH 0x00408000
#define MASK_REGISTER_COUNT MASK_TRANSFER_LENGTH
#define MASK_COPROCESSOR 0x00000f00
/* Tests for transfer length */
#define TRANSFER_SINGLE 0x00000000
#define TRANSFER_DOUBLE 0x00008000
#define TRANSFER_EXTENDED 0x00400000
#define TRANSFER_PACKED MASK_TRANSFER_LENGTH
/* Get the coprocessor number from the opcode. */
#define getCoprocessorNumber(opcode) ((opcode & MASK_COPROCESSOR) >> 8)
/* Get the offset from the opcode. */
#define getOffset(opcode) (opcode & MASK_OFFSET)
/* Tests for specific data transfer load/store opcodes. */
#define TEST_OPCODE(opcode,mask) (((opcode) & (mask)) == (mask))
#define LOAD_OP(opcode) TEST_OPCODE((opcode),MASK_CPDT | BIT_LOAD)
#define STORE_OP(opcode) ((opcode & (MASK_CPDT | BIT_LOAD)) == MASK_CPDT)
#define LDF_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
#define LFM_OP(opcode) (LOAD_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
#define STF_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 1))
#define SFM_OP(opcode) (STORE_OP(opcode) && (getCoprocessorNumber(opcode) == 2))
#define PREINDEXED(opcode) ((opcode & BIT_PREINDEX) != 0)
#define POSTINDEXED(opcode) ((opcode & BIT_PREINDEX) == 0)
#define BIT_UP_SET(opcode) ((opcode & BIT_UP) != 0)
#define BIT_UP_CLEAR(opcode) ((opcode & BIT_DOWN) == 0)
#define WRITE_BACK(opcode) ((opcode & BIT_WRITE_BACK) != 0)
#define LOAD(opcode) ((opcode & BIT_LOAD) != 0)
#define STORE(opcode) ((opcode & BIT_LOAD) == 0)
/*
===
=== Definitions for arithmetic instructions
===
*/
/* bit masks */
#define BIT_MONADIC 0x00008000
#define BIT_CONSTANT 0x00000008
#define CONSTANT_FM(opcode) ((opcode & BIT_CONSTANT) != 0)
#define MONADIC_INSTRUCTION(opcode) ((opcode & BIT_MONADIC) != 0)
/* instruction identification masks */
#define MASK_CPDO 0x0e000000 /* arithmetic opcode */
#define MASK_ARITHMETIC_OPCODE 0x00f08000
#define MASK_DESTINATION_SIZE 0x00080080
/* dyadic arithmetic opcodes. */
#define ADF_CODE 0x00000000
#define MUF_CODE 0x00100000
#define SUF_CODE 0x00200000
#define RSF_CODE 0x00300000
#define DVF_CODE 0x00400000
#define RDF_CODE 0x00500000
#define POW_CODE 0x00600000
#define RPW_CODE 0x00700000
#define RMF_CODE 0x00800000
#define FML_CODE 0x00900000
#define FDV_CODE 0x00a00000
#define FRD_CODE 0x00b00000
#define POL_CODE 0x00c00000
/* 0x00d00000 is an invalid dyadic arithmetic opcode */
/* 0x00e00000 is an invalid dyadic arithmetic opcode */
/* 0x00f00000 is an invalid dyadic arithmetic opcode */
/* monadic arithmetic opcodes. */
#define MVF_CODE 0x00008000
#define MNF_CODE 0x00108000
#define ABS_CODE 0x00208000
#define RND_CODE 0x00308000
#define SQT_CODE 0x00408000
#define LOG_CODE 0x00508000
#define LGN_CODE 0x00608000
#define EXP_CODE 0x00708000
#define SIN_CODE 0x00808000
#define COS_CODE 0x00908000
#define TAN_CODE 0x00a08000
#define ASN_CODE 0x00b08000
#define ACS_CODE 0x00c08000
#define ATN_CODE 0x00d08000
#define URD_CODE 0x00e08000
#define NRM_CODE 0x00f08000
/*
===
=== Definitions for register transfer and comparison instructions
===
*/
#define MASK_CPRT 0x0e000010 /* register transfer opcode */
#define MASK_CPRT_CODE 0x00f00000
#define FLT_CODE 0x00000000
#define FIX_CODE 0x00100000
#define WFS_CODE 0x00200000
#define RFS_CODE 0x00300000
#define WFC_CODE 0x00400000
#define RFC_CODE 0x00500000
#define CMF_CODE 0x00900000
#define CNF_CODE 0x00b00000
#define CMFE_CODE 0x00d00000
#define CNFE_CODE 0x00f00000
/*
===
=== Common definitions
===
*/
/* register masks */
#define MASK_Rd 0x0000f000
#define MASK_Rn 0x000f0000
#define MASK_Fd 0x00007000
#define MASK_Fm 0x00000007
#define MASK_Fn 0x00070000
/* condition code masks */
#define CC_MASK 0xf0000000
#define CC_NEGATIVE 0x80000000
#define CC_ZERO 0x40000000
#define CC_CARRY 0x20000000
#define CC_OVERFLOW 0x10000000
#define CC_EQ 0x00000000
#define CC_NE 0x10000000
#define CC_CS 0x20000000
#define CC_HS CC_CS
#define CC_CC 0x30000000
#define CC_LO CC_CC
#define CC_MI 0x40000000
#define CC_PL 0x50000000
#define CC_VS 0x60000000
#define CC_VC 0x70000000
#define CC_HI 0x80000000
#define CC_LS 0x90000000
#define CC_GE 0xa0000000
#define CC_LT 0xb0000000
#define CC_GT 0xc0000000
#define CC_LE 0xd0000000
#define CC_AL 0xe0000000
#define CC_NV 0xf0000000
/* rounding masks/values */
#define MASK_ROUNDING_MODE 0x00000060
#define ROUND_TO_NEAREST 0x00000000
#define ROUND_TO_PLUS_INFINITY 0x00000020
#define ROUND_TO_MINUS_INFINITY 0x00000040
#define ROUND_TO_ZERO 0x00000060
#define MASK_ROUNDING_PRECISION 0x00080080
#define ROUND_SINGLE 0x00000000
#define ROUND_DOUBLE 0x00000080
#define ROUND_EXTENDED 0x00080000
/* Get the condition code from the opcode. */
#define getCondition(opcode) (opcode >> 28)
/* Get the source register from the opcode. */
#define getRn(opcode) ((opcode & MASK_Rn) >> 16)
/* Get the destination floating point register from the opcode. */
#define getFd(opcode) ((opcode & MASK_Fd) >> 12)
/* Get the first source floating point register from the opcode. */
#define getFn(opcode) ((opcode & MASK_Fn) >> 16)
/* Get the second source floating point register from the opcode. */
#define getFm(opcode) (opcode & MASK_Fm)
/* Get the destination register from the opcode. */
#define getRd(opcode) ((opcode & MASK_Rd) >> 12)
/* Get the rounding mode from the opcode. */
#define getRoundingMode(opcode) ((opcode & MASK_ROUNDING_MODE) >> 5)
extern const floatx80 floatx80Constant[];
extern const float64 float64Constant[];
extern const float32 float32Constant[];
static inline floatx80 getExtendedConstant(const unsigned int nIndex)
{
return floatx80Constant[nIndex];
}
static inline float64 getDoubleConstant(const unsigned int nIndex)
{
return float64Constant[nIndex];
}
static inline float32 getSingleConstant(const unsigned int nIndex)
{
return float32Constant[nIndex];
}
extern unsigned int getRegisterCount(const unsigned int opcode);
extern unsigned int getDestinationSize(const unsigned int opcode);
#endif