qemu-e2k/hw/ppc405.h
j_mayer 008ff9d756 Share devices that might be useful for all PowerPC 40x & 440 implementations
(mostly CPU registration and UIC, for now).


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3340 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-07 14:21:26 +00:00

111 lines
4.3 KiB
C

/*
* QEMU PowerPC 405 shared definitions
*
* Copyright (c) 2007 Jocelyn Mayer
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#if !defined(PPC_405_H)
#define PPC_405_H
#include "ppc4xx.h"
/* Bootinfo as set-up by u-boot */
typedef struct ppc4xx_bd_info_t ppc4xx_bd_info_t;
struct ppc4xx_bd_info_t {
uint32_t bi_memstart;
uint32_t bi_memsize;
uint32_t bi_flashstart;
uint32_t bi_flashsize;
uint32_t bi_flashoffset; /* 0x10 */
uint32_t bi_sramstart;
uint32_t bi_sramsize;
uint32_t bi_bootflags;
uint32_t bi_ipaddr; /* 0x20 */
uint8_t bi_enetaddr[6];
uint16_t bi_ethspeed;
uint32_t bi_intfreq;
uint32_t bi_busfreq; /* 0x30 */
uint32_t bi_baudrate;
uint8_t bi_s_version[4];
uint8_t bi_r_version[32];
uint32_t bi_procfreq;
uint32_t bi_plb_busfreq;
uint32_t bi_pci_busfreq;
uint8_t bi_pci_enetaddr[6];
uint32_t bi_pci_enetaddr2[6];
uint32_t bi_opbfreq;
uint32_t bi_iic_fast[2];
};
/* PowerPC 405 core */
ram_addr_t ppc405_set_bootinfo (CPUState *env, ppc4xx_bd_info_t *bd,
uint32_t flags);
/* PowerPC 4xx peripheral local bus arbitrer */
void ppc4xx_plb_init (CPUState *env);
/* PLB to OPB bridge */
void ppc4xx_pob_init (CPUState *env);
/* OPB arbitrer */
void ppc4xx_opba_init (CPUState *env, ppc4xx_mmio_t *mmio,
target_phys_addr_t offset);
/* SDRAM controller */
void ppc405_sdram_init (CPUState *env, qemu_irq irq, int nbanks,
target_phys_addr_t *ram_bases,
target_phys_addr_t *ram_sizes,
int do_init);
/* Peripheral controller */
void ppc405_ebc_init (CPUState *env);
/* DMA controller */
void ppc405_dma_init (CPUState *env, qemu_irq irqs[4]);
/* GPIO */
void ppc405_gpio_init (CPUState *env, ppc4xx_mmio_t *mmio,
target_phys_addr_t offset);
/* Serial ports */
void ppc405_serial_init (CPUState *env, ppc4xx_mmio_t *mmio,
target_phys_addr_t offset, qemu_irq irq,
CharDriverState *chr);
/* On Chip Memory */
void ppc405_ocm_init (CPUState *env, unsigned long offset);
/* I2C controller */
void ppc405_i2c_init (CPUState *env, ppc4xx_mmio_t *mmio,
target_phys_addr_t offset, qemu_irq irq);
/* General purpose timers */
void ppc4xx_gpt_init (CPUState *env, ppc4xx_mmio_t *mmio,
target_phys_addr_t offset, qemu_irq irq[5]);
/* Memory access layer */
void ppc405_mal_init (CPUState *env, qemu_irq irqs[4]);
/* PowerPC 405 microcontrollers */
CPUState *ppc405cr_init (target_phys_addr_t ram_bases[4],
target_phys_addr_t ram_sizes[4],
uint32_t sysclk, qemu_irq **picp,
ram_addr_t *offsetp, int do_init);
CPUState *ppc405ep_init (target_phys_addr_t ram_bases[2],
target_phys_addr_t ram_sizes[2],
uint32_t sysclk, qemu_irq **picp,
ram_addr_t *offsetp, int do_init);
/* IBM STBxxx microcontrollers */
CPUState *ppc_stb025_init (target_phys_addr_t ram_bases[2],
target_phys_addr_t ram_sizes[2],
uint32_t sysclk, qemu_irq **picp,
ram_addr_t *offsetp);
#endif /* !defined(PPC_405_H) */