120f765e03
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Hongren (Zenithal) Zheng <i@zenithal.me> Message-id: 20220812075642.1200578-1-sw@weilnetz.de Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
201 lines
7.8 KiB
ReStructuredText
201 lines
7.8 KiB
ReStructuredText
ACPI ERST DEVICE
|
|
================
|
|
|
|
The ACPI ERST device is utilized to support the ACPI Error Record
|
|
Serialization Table, ERST, functionality. This feature is designed for
|
|
storing error records in persistent storage for future reference
|
|
and/or debugging.
|
|
|
|
The ACPI specification[1], in Chapter "ACPI Platform Error Interfaces
|
|
(APEI)", and specifically subsection "Error Serialization", outlines a
|
|
method for storing error records into persistent storage.
|
|
|
|
The format of error records is described in the UEFI specification[2],
|
|
in Appendix N "Common Platform Error Record".
|
|
|
|
While the ACPI specification allows for an NVRAM "mode" (see
|
|
GET_ERROR_LOG_ADDRESS_RANGE_ATTRIBUTES) where non-volatile RAM is
|
|
directly exposed for direct access by the OS/guest, this device
|
|
implements the non-NVRAM "mode". This non-NVRAM "mode" is what is
|
|
implemented by most BIOS (since flash memory requires programming
|
|
operations in order to update its contents). Furthermore, as of the
|
|
time of this writing, Linux only supports the non-NVRAM "mode".
|
|
|
|
|
|
Background/Motivation
|
|
---------------------
|
|
|
|
Linux uses the persistent storage filesystem, pstore, to record
|
|
information (eg. dmesg tail) upon panics and shutdowns. Pstore is
|
|
independent of, and runs before, kdump. In certain scenarios (ie.
|
|
hosts/guests with root filesystems on NFS/iSCSI where networking
|
|
software and/or hardware fails, and thus kdump fails), pstore may
|
|
contain information available for post-mortem debugging.
|
|
|
|
Two common storage backends for the pstore filesystem are ACPI ERST
|
|
and UEFI. Most BIOS implement ACPI ERST. UEFI is not utilized in all
|
|
guests. With QEMU supporting ACPI ERST, it becomes a viable pstore
|
|
storage backend for virtual machines (as it is now for bare metal
|
|
machines).
|
|
|
|
Enabling support for ACPI ERST facilitates a consistent method to
|
|
capture kernel panic information in a wide range of guests: from
|
|
resource-constrained microvms to very large guests, and in particular,
|
|
in direct-boot environments (which would lack UEFI run-time services).
|
|
|
|
Note that Microsoft Windows also utilizes the ACPI ERST for certain
|
|
crash information, if available[3].
|
|
|
|
|
|
Configuration|Usage
|
|
-------------------
|
|
|
|
To use ACPI ERST, a memory-backend-file object and acpi-erst device
|
|
can be created, for example:
|
|
|
|
qemu ...
|
|
-object memory-backend-file,id=erstnvram,mem-path=acpi-erst.backing,size=0x10000,share=on \
|
|
-device acpi-erst,memdev=erstnvram
|
|
|
|
For proper operation, the ACPI ERST device needs a memory-backend-file
|
|
object with the following parameters:
|
|
|
|
- id: The id of the memory-backend-file object is used to associate
|
|
this memory with the acpi-erst device.
|
|
- size: The size of the ACPI ERST backing storage. This parameter is
|
|
required.
|
|
- mem-path: The location of the ACPI ERST backing storage file. This
|
|
parameter is also required.
|
|
- share: The share=on parameter is required so that updates to the
|
|
ERST backing store are written to the file.
|
|
|
|
and ERST device:
|
|
|
|
- memdev: Is the object id of the memory-backend-file.
|
|
- record_size: Specifies the size of the records (or slots) in the
|
|
backend storage. Must be a power of two value greater than or
|
|
equal to 4096 (PAGE_SIZE).
|
|
|
|
|
|
PCI Interface
|
|
-------------
|
|
|
|
The ERST device is a PCI device with two BARs, one for accessing the
|
|
programming registers, and the other for accessing the record exchange
|
|
buffer.
|
|
|
|
BAR0 contains the programming interface consisting of ACTION and VALUE
|
|
64-bit registers. All ERST actions/operations/side effects happen on
|
|
the write to the ACTION, by design. Any data needed by the action must
|
|
be placed into VALUE prior to writing ACTION. Reading the VALUE
|
|
simply returns the register contents, which can be updated by a
|
|
previous ACTION.
|
|
|
|
BAR1 contains the 8KiB record exchange buffer, which is the
|
|
implemented maximum record size.
|
|
|
|
|
|
Backend Storage Format
|
|
----------------------
|
|
|
|
The backend storage is divided into fixed size "slots", 8KiB in
|
|
length, with each slot storing a single record. Not all slots need to
|
|
be occupied, and they need not be occupied in a contiguous fashion.
|
|
The ability to clear/erase specific records allows for the formation
|
|
of unoccupied slots.
|
|
|
|
Slot 0 contains a backend storage header that identifies the contents
|
|
as ERST and also facilitates efficient access to the records.
|
|
Depending upon the size of the backend storage, additional slots will
|
|
be designated to be a part of the slot 0 header. For example, at 8KiB,
|
|
the slot 0 header can accommodate 1021 records. Thus a storage size
|
|
of 8MiB (8KiB * 1024) requires an additional slot for use by the
|
|
header. In this scenario, slot 0 and slot 1 form the backend storage
|
|
header, and records can be stored starting at slot 2.
|
|
|
|
Below is an example layout of the backend storage format (for storage
|
|
size less than 8MiB). The size of the storage is a multiple of 8KiB,
|
|
and contains N number of slots to store records. The example below
|
|
shows two records (in CPER format) in the backend storage, while the
|
|
remaining slots are empty/available.
|
|
|
|
::
|
|
|
|
Slot Record
|
|
<------------------ 8KiB -------------------->
|
|
+--------------------------------------------+
|
|
0 | storage header |
|
|
+--------------------------------------------+
|
|
1 | empty/available |
|
|
+--------------------------------------------+
|
|
2 | CPER |
|
|
+--------------------------------------------+
|
|
3 | CPER |
|
|
+--------------------------------------------+
|
|
... | |
|
|
+--------------------------------------------+
|
|
N | empty/available |
|
|
+--------------------------------------------+
|
|
|
|
The storage header consists of some basic information and an array
|
|
of CPER record_id's to efficiently access records in the backend
|
|
storage.
|
|
|
|
All fields in the header are stored in little endian format.
|
|
|
|
::
|
|
|
|
+--------------------------------------------+
|
|
| magic | 0x0000
|
|
+--------------------------------------------+
|
|
| record_offset | record_size | 0x0008
|
|
+--------------------------------------------+
|
|
| record_count | reserved | version | 0x0010
|
|
+--------------------------------------------+
|
|
| record_id[0] | 0x0018
|
|
+--------------------------------------------+
|
|
| record_id[1] | 0x0020
|
|
+--------------------------------------------+
|
|
| record_id[...] |
|
|
+--------------------------------------------+
|
|
| record_id[N] | 0x1FF8
|
|
+--------------------------------------------+
|
|
|
|
The 'magic' field contains the value 0x524F545354535245.
|
|
|
|
The 'record_size' field contains the value 0x2000, 8KiB.
|
|
|
|
The 'record_offset' field points to the first record_id in the array,
|
|
0x0018.
|
|
|
|
The 'version' field contains 0x0100, the first version.
|
|
|
|
The 'record_count' field contains the number of valid records in the
|
|
backend storage.
|
|
|
|
The 'record_id' array fields are the 64-bit record identifiers of the
|
|
CPER record in the corresponding slot. Stated differently, the
|
|
location of a CPER record_id in the record_id[] array provides the
|
|
slot index for the corresponding record in the backend storage.
|
|
|
|
Note that, for example, with a backend storage less than 8MiB, slot 0
|
|
contains the header, so the record_id[0] will never contain a valid
|
|
CPER record_id. Instead slot 1 is the first available slot and thus
|
|
record_id_[1] may contain a CPER.
|
|
|
|
A 'record_id' of all 0s or all 1s indicates an invalid record (ie. the
|
|
slot is available).
|
|
|
|
|
|
References
|
|
----------
|
|
|
|
[1] "Advanced Configuration and Power Interface Specification",
|
|
version 4.0, June 2009.
|
|
|
|
[2] "Unified Extensible Firmware Interface Specification",
|
|
version 2.1, October 2008.
|
|
|
|
[3] "Windows Hardware Error Architecture", specifically
|
|
"Error Record Persistence Mechanism".
|