78368575a6
Add a block driver that is capable of supporting any full disk
encryption format. This utilizes the previously added block
encryption code, and at this time supports the LUKS format.
The driver code is capable of supporting any format supported
by the QCryptoBlock module, so it registers one block driver
for each format. This patch only registers the "luks" driver
since the "qcow" driver is there only for back-compatibility
with existing qcow built-in encryption.
New LUKS compatible volumes can be formatted using qemu-img
with defaults for all settings.
$ qemu-img create --object secret,data=123456,id=sec0 \
-f luks -o key-secret=sec0 demo.luks 10G
Alternatively the cryptographic settings can be explicitly
set
$ qemu-img create --object secret,data=123456,id=sec0 \
-f luks -o key-secret=sec0,cipher-alg=aes-256,\
cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \
demo.luks 10G
And query its size
$ qemu-img info demo.img
image: demo.img
file format: luks
virtual size: 10G (10737418240 bytes)
disk size: 132K
encrypted: yes
Note that it was not necessary to provide the password
when querying info for the volume. The password is only
required when performing I/O on the volume
All volumes created by this new 'luks' driver should be
capable of being opened by the kernel dm-crypt driver.
The only algorithms listed in the LUKS spec that are
not currently supported by this impl are sha512 and
ripemd160 hashes and cast6 cipher.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
[ kwolf - Added #include to resolve conflict with da34e65c ]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2559 lines
82 KiB
Python
2559 lines
82 KiB
Python
# -*- Mode: Python -*-
|
|
#
|
|
# QAPI block core definitions (vm unrelated)
|
|
|
|
# QAPI common definitions
|
|
{ 'include': 'common.json' }
|
|
|
|
##
|
|
# @SnapshotInfo
|
|
#
|
|
# @id: unique snapshot id
|
|
#
|
|
# @name: user chosen name
|
|
#
|
|
# @vm-state-size: size of the VM state
|
|
#
|
|
# @date-sec: UTC date of the snapshot in seconds
|
|
#
|
|
# @date-nsec: fractional part in nano seconds to be used with date-sec
|
|
#
|
|
# @vm-clock-sec: VM clock relative to boot in seconds
|
|
#
|
|
# @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec
|
|
#
|
|
# Since: 1.3
|
|
#
|
|
##
|
|
|
|
{ 'struct': 'SnapshotInfo',
|
|
'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int',
|
|
'date-sec': 'int', 'date-nsec': 'int',
|
|
'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } }
|
|
|
|
##
|
|
# @ImageInfoSpecificQCow2:
|
|
#
|
|
# @compat: compatibility level
|
|
#
|
|
# @lazy-refcounts: #optional on or off; only valid for compat >= 1.1
|
|
#
|
|
# @corrupt: #optional true if the image has been marked corrupt; only valid for
|
|
# compat >= 1.1 (since 2.2)
|
|
#
|
|
# @refcount-bits: width of a refcount entry in bits (since 2.3)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'struct': 'ImageInfoSpecificQCow2',
|
|
'data': {
|
|
'compat': 'str',
|
|
'*lazy-refcounts': 'bool',
|
|
'*corrupt': 'bool',
|
|
'refcount-bits': 'int'
|
|
} }
|
|
|
|
##
|
|
# @ImageInfoSpecificVmdk:
|
|
#
|
|
# @create-type: The create type of VMDK image
|
|
#
|
|
# @cid: Content id of image
|
|
#
|
|
# @parent-cid: Parent VMDK image's cid
|
|
#
|
|
# @extents: List of extent files
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'struct': 'ImageInfoSpecificVmdk',
|
|
'data': {
|
|
'create-type': 'str',
|
|
'cid': 'int',
|
|
'parent-cid': 'int',
|
|
'extents': ['ImageInfo']
|
|
} }
|
|
|
|
##
|
|
# @ImageInfoSpecific:
|
|
#
|
|
# A discriminated record of image format specific information structures.
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
|
|
{ 'union': 'ImageInfoSpecific',
|
|
'data': {
|
|
'qcow2': 'ImageInfoSpecificQCow2',
|
|
'vmdk': 'ImageInfoSpecificVmdk'
|
|
} }
|
|
|
|
##
|
|
# @ImageInfo:
|
|
#
|
|
# Information about a QEMU image file
|
|
#
|
|
# @filename: name of the image file
|
|
#
|
|
# @format: format of the image file
|
|
#
|
|
# @virtual-size: maximum capacity in bytes of the image
|
|
#
|
|
# @actual-size: #optional actual size on disk in bytes of the image
|
|
#
|
|
# @dirty-flag: #optional true if image is not cleanly closed
|
|
#
|
|
# @cluster-size: #optional size of a cluster in bytes
|
|
#
|
|
# @encrypted: #optional true if the image is encrypted
|
|
#
|
|
# @compressed: #optional true if the image is compressed (Since 1.7)
|
|
#
|
|
# @backing-filename: #optional name of the backing file
|
|
#
|
|
# @full-backing-filename: #optional full path of the backing file
|
|
#
|
|
# @backing-filename-format: #optional the format of the backing file
|
|
#
|
|
# @snapshots: #optional list of VM snapshots
|
|
#
|
|
# @backing-image: #optional info of the backing image (since 1.6)
|
|
#
|
|
# @format-specific: #optional structure supplying additional format-specific
|
|
# information (since 1.7)
|
|
#
|
|
# Since: 1.3
|
|
#
|
|
##
|
|
|
|
{ 'struct': 'ImageInfo',
|
|
'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool',
|
|
'*actual-size': 'int', 'virtual-size': 'int',
|
|
'*cluster-size': 'int', '*encrypted': 'bool', '*compressed': 'bool',
|
|
'*backing-filename': 'str', '*full-backing-filename': 'str',
|
|
'*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'],
|
|
'*backing-image': 'ImageInfo',
|
|
'*format-specific': 'ImageInfoSpecific' } }
|
|
|
|
##
|
|
# @ImageCheck:
|
|
#
|
|
# Information about a QEMU image file check
|
|
#
|
|
# @filename: name of the image file checked
|
|
#
|
|
# @format: format of the image file checked
|
|
#
|
|
# @check-errors: number of unexpected errors occurred during check
|
|
#
|
|
# @image-end-offset: #optional offset (in bytes) where the image ends, this
|
|
# field is present if the driver for the image format
|
|
# supports it
|
|
#
|
|
# @corruptions: #optional number of corruptions found during the check if any
|
|
#
|
|
# @leaks: #optional number of leaks found during the check if any
|
|
#
|
|
# @corruptions-fixed: #optional number of corruptions fixed during the check
|
|
# if any
|
|
#
|
|
# @leaks-fixed: #optional number of leaks fixed during the check if any
|
|
#
|
|
# @total-clusters: #optional total number of clusters, this field is present
|
|
# if the driver for the image format supports it
|
|
#
|
|
# @allocated-clusters: #optional total number of allocated clusters, this
|
|
# field is present if the driver for the image format
|
|
# supports it
|
|
#
|
|
# @fragmented-clusters: #optional total number of fragmented clusters, this
|
|
# field is present if the driver for the image format
|
|
# supports it
|
|
#
|
|
# @compressed-clusters: #optional total number of compressed clusters, this
|
|
# field is present if the driver for the image format
|
|
# supports it
|
|
#
|
|
# Since: 1.4
|
|
#
|
|
##
|
|
|
|
{ 'struct': 'ImageCheck',
|
|
'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int',
|
|
'*image-end-offset': 'int', '*corruptions': 'int', '*leaks': 'int',
|
|
'*corruptions-fixed': 'int', '*leaks-fixed': 'int',
|
|
'*total-clusters': 'int', '*allocated-clusters': 'int',
|
|
'*fragmented-clusters': 'int', '*compressed-clusters': 'int' } }
|
|
|
|
##
|
|
# @MapEntry:
|
|
#
|
|
# Mapping information from a virtual block range to a host file range
|
|
#
|
|
# @start: the start byte of the mapped virtual range
|
|
#
|
|
# @length: the number of bytes of the mapped virtual range
|
|
#
|
|
# @data: whether the mapped range has data
|
|
#
|
|
# @zero: whether the virtual blocks are zeroed
|
|
#
|
|
# @depth: the depth of the mapping
|
|
#
|
|
# @offset: #optional the offset in file that the virtual sectors are mapped to
|
|
#
|
|
# @filename: #optional filename that is referred to by @offset
|
|
#
|
|
# Since: 2.6
|
|
#
|
|
##
|
|
{ 'struct': 'MapEntry',
|
|
'data': {'start': 'int', 'length': 'int', 'data': 'bool',
|
|
'zero': 'bool', 'depth': 'int', '*offset': 'int',
|
|
'*filename': 'str' } }
|
|
|
|
##
|
|
# @BlockdevCacheInfo
|
|
#
|
|
# Cache mode information for a block device
|
|
#
|
|
# @writeback: true if writeback mode is enabled
|
|
# @direct: true if the host page cache is bypassed (O_DIRECT)
|
|
# @no-flush: true if flush requests are ignored for the device
|
|
#
|
|
# Since: 2.3
|
|
##
|
|
{ 'struct': 'BlockdevCacheInfo',
|
|
'data': { 'writeback': 'bool',
|
|
'direct': 'bool',
|
|
'no-flush': 'bool' } }
|
|
|
|
##
|
|
# @BlockDeviceInfo:
|
|
#
|
|
# Information about the backing device for a block device.
|
|
#
|
|
# @file: the filename of the backing device
|
|
#
|
|
# @node-name: #optional the name of the block driver node (Since 2.0)
|
|
#
|
|
# @ro: true if the backing device was open read-only
|
|
#
|
|
# @drv: the name of the block format used to open the backing device. As of
|
|
# 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg',
|
|
# 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
|
|
# 'http', 'https', 'luks', 'nbd', 'parallels', 'qcow',
|
|
# 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat'
|
|
# 2.2: 'archipelago' added, 'cow' dropped
|
|
# 2.3: 'host_floppy' deprecated
|
|
# 2.5: 'host_floppy' dropped
|
|
# 2.6: 'luks' added
|
|
#
|
|
# @backing_file: #optional the name of the backing file (for copy-on-write)
|
|
#
|
|
# @backing_file_depth: number of files in the backing file chain (since: 1.2)
|
|
#
|
|
# @encrypted: true if the backing device is encrypted
|
|
#
|
|
# @encryption_key_missing: true if the backing device is encrypted but an
|
|
# valid encryption key is missing
|
|
#
|
|
# @detect_zeroes: detect and optimize zero writes (Since 2.1)
|
|
#
|
|
# @bps: total throughput limit in bytes per second is specified
|
|
#
|
|
# @bps_rd: read throughput limit in bytes per second is specified
|
|
#
|
|
# @bps_wr: write throughput limit in bytes per second is specified
|
|
#
|
|
# @iops: total I/O operations per second is specified
|
|
#
|
|
# @iops_rd: read I/O operations per second is specified
|
|
#
|
|
# @iops_wr: write I/O operations per second is specified
|
|
#
|
|
# @image: the info of image used (since: 1.6)
|
|
#
|
|
# @bps_max: #optional total throughput limit during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @bps_rd_max: #optional read throughput limit during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @bps_wr_max: #optional write throughput limit during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @iops_max: #optional total I/O operations per second during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @iops_rd_max: #optional read I/O operations per second during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @iops_wr_max: #optional write I/O operations per second during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @bps_max_length: #optional maximum length of the @bps_max burst
|
|
# period, in seconds. (Since 2.6)
|
|
#
|
|
# @bps_rd_max_length: #optional maximum length of the @bps_rd_max
|
|
# burst period, in seconds. (Since 2.6)
|
|
#
|
|
# @bps_wr_max_length: #optional maximum length of the @bps_wr_max
|
|
# burst period, in seconds. (Since 2.6)
|
|
#
|
|
# @iops_max_length: #optional maximum length of the @iops burst
|
|
# period, in seconds. (Since 2.6)
|
|
#
|
|
# @iops_rd_max_length: #optional maximum length of the @iops_rd_max
|
|
# burst period, in seconds. (Since 2.6)
|
|
#
|
|
# @iops_wr_max_length: #optional maximum length of the @iops_wr_max
|
|
# burst period, in seconds. (Since 2.6)
|
|
#
|
|
# @iops_size: #optional an I/O size in bytes (Since 1.7)
|
|
#
|
|
# @group: #optional throttle group name (Since 2.4)
|
|
#
|
|
# @cache: the cache mode used for the block device (since: 2.3)
|
|
#
|
|
# @write_threshold: configured write threshold for the device.
|
|
# 0 if disabled. (Since 2.3)
|
|
#
|
|
# Since: 0.14.0
|
|
#
|
|
##
|
|
{ 'struct': 'BlockDeviceInfo',
|
|
'data': { 'file': 'str', '*node-name': 'str', 'ro': 'bool', 'drv': 'str',
|
|
'*backing_file': 'str', 'backing_file_depth': 'int',
|
|
'encrypted': 'bool', 'encryption_key_missing': 'bool',
|
|
'detect_zeroes': 'BlockdevDetectZeroesOptions',
|
|
'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
|
|
'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
|
|
'image': 'ImageInfo',
|
|
'*bps_max': 'int', '*bps_rd_max': 'int',
|
|
'*bps_wr_max': 'int', '*iops_max': 'int',
|
|
'*iops_rd_max': 'int', '*iops_wr_max': 'int',
|
|
'*bps_max_length': 'int', '*bps_rd_max_length': 'int',
|
|
'*bps_wr_max_length': 'int', '*iops_max_length': 'int',
|
|
'*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
|
|
'*iops_size': 'int', '*group': 'str', 'cache': 'BlockdevCacheInfo',
|
|
'write_threshold': 'int' } }
|
|
|
|
##
|
|
# @BlockDeviceIoStatus:
|
|
#
|
|
# An enumeration of block device I/O status.
|
|
#
|
|
# @ok: The last I/O operation has succeeded
|
|
#
|
|
# @failed: The last I/O operation has failed
|
|
#
|
|
# @nospace: The last I/O operation has failed due to a no-space condition
|
|
#
|
|
# Since: 1.0
|
|
##
|
|
{ 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] }
|
|
|
|
##
|
|
# @BlockDeviceMapEntry:
|
|
#
|
|
# Entry in the metadata map of the device (returned by "qemu-img map")
|
|
#
|
|
# @start: Offset in the image of the first byte described by this entry
|
|
# (in bytes)
|
|
#
|
|
# @length: Length of the range described by this entry (in bytes)
|
|
#
|
|
# @depth: Number of layers (0 = top image, 1 = top image's backing file, etc.)
|
|
# before reaching one for which the range is allocated. The value is
|
|
# in the range 0 to the depth of the image chain - 1.
|
|
#
|
|
# @zero: the sectors in this range read as zeros
|
|
#
|
|
# @data: reading the image will actually read data from a file (in particular,
|
|
# if @offset is present this means that the sectors are not simply
|
|
# preallocated, but contain actual data in raw format)
|
|
#
|
|
# @offset: if present, the image file stores the data for this range in
|
|
# raw format at the given offset.
|
|
#
|
|
# Since 1.7
|
|
##
|
|
{ 'struct': 'BlockDeviceMapEntry',
|
|
'data': { 'start': 'int', 'length': 'int', 'depth': 'int', 'zero': 'bool',
|
|
'data': 'bool', '*offset': 'int' } }
|
|
|
|
##
|
|
# @DirtyBitmapStatus:
|
|
#
|
|
# An enumeration of possible states that a dirty bitmap can report to the user.
|
|
#
|
|
# @frozen: The bitmap is currently in-use by a backup operation or block job,
|
|
# and is immutable.
|
|
#
|
|
# @disabled: The bitmap is currently in-use by an internal operation and is
|
|
# read-only. It can still be deleted.
|
|
#
|
|
# @active: The bitmap is actively monitoring for new writes, and can be cleared,
|
|
# deleted, or used for backup operations.
|
|
#
|
|
# Since: 2.4
|
|
##
|
|
{ 'enum': 'DirtyBitmapStatus',
|
|
'data': ['active', 'disabled', 'frozen'] }
|
|
|
|
##
|
|
# @BlockDirtyInfo:
|
|
#
|
|
# Block dirty bitmap information.
|
|
#
|
|
# @name: #optional the name of the dirty bitmap (Since 2.4)
|
|
#
|
|
# @count: number of dirty bytes according to the dirty bitmap
|
|
#
|
|
# @granularity: granularity of the dirty bitmap in bytes (since 1.4)
|
|
#
|
|
# @status: current status of the dirty bitmap (since 2.4)
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'struct': 'BlockDirtyInfo',
|
|
'data': {'*name': 'str', 'count': 'int', 'granularity': 'uint32',
|
|
'status': 'DirtyBitmapStatus'} }
|
|
|
|
##
|
|
# @BlockInfo:
|
|
#
|
|
# Block device information. This structure describes a virtual device and
|
|
# the backing device associated with it.
|
|
#
|
|
# @device: The device name associated with the virtual device.
|
|
#
|
|
# @type: This field is returned only for compatibility reasons, it should
|
|
# not be used (always returns 'unknown')
|
|
#
|
|
# @removable: True if the device supports removable media.
|
|
#
|
|
# @locked: True if the guest has locked this device from having its media
|
|
# removed
|
|
#
|
|
# @tray_open: #optional True if the device's tray is open
|
|
# (only present if it has a tray)
|
|
#
|
|
# @dirty-bitmaps: #optional dirty bitmaps information (only present if the
|
|
# driver has one or more dirty bitmaps) (Since 2.0)
|
|
#
|
|
# @io-status: #optional @BlockDeviceIoStatus. Only present if the device
|
|
# supports it and the VM is configured to stop on errors
|
|
# (supported device models: virtio-blk, ide, scsi-disk)
|
|
#
|
|
# @inserted: #optional @BlockDeviceInfo describing the device if media is
|
|
# present
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'struct': 'BlockInfo',
|
|
'data': {'device': 'str', 'type': 'str', 'removable': 'bool',
|
|
'locked': 'bool', '*inserted': 'BlockDeviceInfo',
|
|
'*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus',
|
|
'*dirty-bitmaps': ['BlockDirtyInfo'] } }
|
|
|
|
##
|
|
# @query-block:
|
|
#
|
|
# Get a list of BlockInfo for all virtual block devices.
|
|
#
|
|
# Returns: a list of @BlockInfo describing each virtual block device
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'command': 'query-block', 'returns': ['BlockInfo'] }
|
|
|
|
|
|
##
|
|
# @BlockDeviceTimedStats:
|
|
#
|
|
# Statistics of a block device during a given interval of time.
|
|
#
|
|
# @interval_length: Interval used for calculating the statistics,
|
|
# in seconds.
|
|
#
|
|
# @min_rd_latency_ns: Minimum latency of read operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @min_wr_latency_ns: Minimum latency of write operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @min_flush_latency_ns: Minimum latency of flush operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @max_rd_latency_ns: Maximum latency of read operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @max_wr_latency_ns: Maximum latency of write operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @max_flush_latency_ns: Maximum latency of flush operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @avg_rd_latency_ns: Average latency of read operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @avg_wr_latency_ns: Average latency of write operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @avg_flush_latency_ns: Average latency of flush operations in the
|
|
# defined interval, in nanoseconds.
|
|
#
|
|
# @avg_rd_queue_depth: Average number of pending read operations
|
|
# in the defined interval.
|
|
#
|
|
# @avg_wr_queue_depth: Average number of pending write operations
|
|
# in the defined interval.
|
|
#
|
|
# Since: 2.5
|
|
##
|
|
|
|
{ 'struct': 'BlockDeviceTimedStats',
|
|
'data': { 'interval_length': 'int', 'min_rd_latency_ns': 'int',
|
|
'max_rd_latency_ns': 'int', 'avg_rd_latency_ns': 'int',
|
|
'min_wr_latency_ns': 'int', 'max_wr_latency_ns': 'int',
|
|
'avg_wr_latency_ns': 'int', 'min_flush_latency_ns': 'int',
|
|
'max_flush_latency_ns': 'int', 'avg_flush_latency_ns': 'int',
|
|
'avg_rd_queue_depth': 'number', 'avg_wr_queue_depth': 'number' } }
|
|
|
|
##
|
|
# @BlockDeviceStats:
|
|
#
|
|
# Statistics of a virtual block device or a block backing device.
|
|
#
|
|
# @rd_bytes: The number of bytes read by the device.
|
|
#
|
|
# @wr_bytes: The number of bytes written by the device.
|
|
#
|
|
# @rd_operations: The number of read operations performed by the device.
|
|
#
|
|
# @wr_operations: The number of write operations performed by the device.
|
|
#
|
|
# @flush_operations: The number of cache flush operations performed by the
|
|
# device (since 0.15.0)
|
|
#
|
|
# @flush_total_time_ns: Total time spend on cache flushes in nano-seconds
|
|
# (since 0.15.0).
|
|
#
|
|
# @wr_total_time_ns: Total time spend on writes in nano-seconds (since 0.15.0).
|
|
#
|
|
# @rd_total_time_ns: Total_time_spend on reads in nano-seconds (since 0.15.0).
|
|
#
|
|
# @wr_highest_offset: The offset after the greatest byte written to the
|
|
# device. The intended use of this information is for
|
|
# growable sparse files (like qcow2) that are used on top
|
|
# of a physical device.
|
|
#
|
|
# @rd_merged: Number of read requests that have been merged into another
|
|
# request (Since 2.3).
|
|
#
|
|
# @wr_merged: Number of write requests that have been merged into another
|
|
# request (Since 2.3).
|
|
#
|
|
# @idle_time_ns: #optional Time since the last I/O operation, in
|
|
# nanoseconds. If the field is absent it means that
|
|
# there haven't been any operations yet (Since 2.5).
|
|
#
|
|
# @failed_rd_operations: The number of failed read operations
|
|
# performed by the device (Since 2.5)
|
|
#
|
|
# @failed_wr_operations: The number of failed write operations
|
|
# performed by the device (Since 2.5)
|
|
#
|
|
# @failed_flush_operations: The number of failed flush operations
|
|
# performed by the device (Since 2.5)
|
|
#
|
|
# @invalid_rd_operations: The number of invalid read operations
|
|
# performed by the device (Since 2.5)
|
|
#
|
|
# @invalid_wr_operations: The number of invalid write operations
|
|
# performed by the device (Since 2.5)
|
|
#
|
|
# @invalid_flush_operations: The number of invalid flush operations
|
|
# performed by the device (Since 2.5)
|
|
#
|
|
# @account_invalid: Whether invalid operations are included in the
|
|
# last access statistics (Since 2.5)
|
|
#
|
|
# @account_failed: Whether failed operations are included in the
|
|
# latency and last access statistics (Since 2.5)
|
|
#
|
|
# @timed_stats: Statistics specific to the set of previously defined
|
|
# intervals of time (Since 2.5)
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'struct': 'BlockDeviceStats',
|
|
'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'rd_operations': 'int',
|
|
'wr_operations': 'int', 'flush_operations': 'int',
|
|
'flush_total_time_ns': 'int', 'wr_total_time_ns': 'int',
|
|
'rd_total_time_ns': 'int', 'wr_highest_offset': 'int',
|
|
'rd_merged': 'int', 'wr_merged': 'int', '*idle_time_ns': 'int',
|
|
'failed_rd_operations': 'int', 'failed_wr_operations': 'int',
|
|
'failed_flush_operations': 'int', 'invalid_rd_operations': 'int',
|
|
'invalid_wr_operations': 'int', 'invalid_flush_operations': 'int',
|
|
'account_invalid': 'bool', 'account_failed': 'bool',
|
|
'timed_stats': ['BlockDeviceTimedStats'] } }
|
|
|
|
##
|
|
# @BlockStats:
|
|
#
|
|
# Statistics of a virtual block device or a block backing device.
|
|
#
|
|
# @device: #optional If the stats are for a virtual block device, the name
|
|
# corresponding to the virtual block device.
|
|
#
|
|
# @node-name: #optional The node name of the device. (Since 2.3)
|
|
#
|
|
# @stats: A @BlockDeviceStats for the device.
|
|
#
|
|
# @parent: #optional This describes the file block device if it has one.
|
|
#
|
|
# @backing: #optional This describes the backing block device if it has one.
|
|
# (Since 2.0)
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'struct': 'BlockStats',
|
|
'data': {'*device': 'str', '*node-name': 'str',
|
|
'stats': 'BlockDeviceStats',
|
|
'*parent': 'BlockStats',
|
|
'*backing': 'BlockStats'} }
|
|
|
|
##
|
|
# @query-blockstats:
|
|
#
|
|
# Query the @BlockStats for all virtual block devices.
|
|
#
|
|
# @query-nodes: #optional If true, the command will query all the block nodes
|
|
# that have a node name, in a list which will include "parent"
|
|
# information, but not "backing".
|
|
# If false or omitted, the behavior is as before - query all the
|
|
# device backends, recursively including their "parent" and
|
|
# "backing". (Since 2.3)
|
|
#
|
|
# Returns: A list of @BlockStats for each virtual block devices.
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'command': 'query-blockstats',
|
|
'data': { '*query-nodes': 'bool' },
|
|
'returns': ['BlockStats'] }
|
|
|
|
##
|
|
# @BlockdevOnError:
|
|
#
|
|
# An enumeration of possible behaviors for errors on I/O operations.
|
|
# The exact meaning depends on whether the I/O was initiated by a guest
|
|
# or by a block job
|
|
#
|
|
# @report: for guest operations, report the error to the guest;
|
|
# for jobs, cancel the job
|
|
#
|
|
# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR
|
|
# or BLOCK_JOB_ERROR)
|
|
#
|
|
# @enospc: same as @stop on ENOSPC, same as @report otherwise.
|
|
#
|
|
# @stop: for guest operations, stop the virtual machine;
|
|
# for jobs, pause the job
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'enum': 'BlockdevOnError',
|
|
'data': ['report', 'ignore', 'enospc', 'stop'] }
|
|
|
|
##
|
|
# @MirrorSyncMode:
|
|
#
|
|
# An enumeration of possible behaviors for the initial synchronization
|
|
# phase of storage mirroring.
|
|
#
|
|
# @top: copies data in the topmost image to the destination
|
|
#
|
|
# @full: copies data from all images to the destination
|
|
#
|
|
# @none: only copy data written from now on
|
|
#
|
|
# @incremental: only copy data described by the dirty bitmap. Since: 2.4
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'enum': 'MirrorSyncMode',
|
|
'data': ['top', 'full', 'none', 'incremental'] }
|
|
|
|
##
|
|
# @BlockJobType:
|
|
#
|
|
# Type of a block job.
|
|
#
|
|
# @commit: block commit job type, see "block-commit"
|
|
#
|
|
# @stream: block stream job type, see "block-stream"
|
|
#
|
|
# @mirror: drive mirror job type, see "drive-mirror"
|
|
#
|
|
# @backup: drive backup job type, see "drive-backup"
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'enum': 'BlockJobType',
|
|
'data': ['commit', 'stream', 'mirror', 'backup'] }
|
|
|
|
##
|
|
# @BlockJobInfo:
|
|
#
|
|
# Information about a long-running block device operation.
|
|
#
|
|
# @type: the job type ('stream' for image streaming)
|
|
#
|
|
# @device: the block device name
|
|
#
|
|
# @len: the maximum progress value
|
|
#
|
|
# @busy: false if the job is known to be in a quiescent state, with
|
|
# no pending I/O. Since 1.3.
|
|
#
|
|
# @paused: whether the job is paused or, if @busy is true, will
|
|
# pause itself as soon as possible. Since 1.3.
|
|
#
|
|
# @offset: the current progress value
|
|
#
|
|
# @speed: the rate limit, bytes per second
|
|
#
|
|
# @io-status: the status of the job (since 1.3)
|
|
#
|
|
# @ready: true if the job may be completed (since 2.2)
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'struct': 'BlockJobInfo',
|
|
'data': {'type': 'str', 'device': 'str', 'len': 'int',
|
|
'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int',
|
|
'io-status': 'BlockDeviceIoStatus', 'ready': 'bool'} }
|
|
|
|
##
|
|
# @query-block-jobs:
|
|
#
|
|
# Return information about long-running block device operations.
|
|
#
|
|
# Returns: a list of @BlockJobInfo for each active block job
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] }
|
|
|
|
##
|
|
# @block_passwd:
|
|
#
|
|
# This command sets the password of a block device that has not been open
|
|
# with a password and requires one.
|
|
#
|
|
# The two cases where this can happen are a block device is created through
|
|
# QEMU's initial command line or a block device is changed through the legacy
|
|
# @change interface.
|
|
#
|
|
# In the event that the block device is created through the initial command
|
|
# line, the VM will start in the stopped state regardless of whether '-S' is
|
|
# used. The intention is for a management tool to query the block devices to
|
|
# determine which ones are encrypted, set the passwords with this command, and
|
|
# then start the guest with the @cont command.
|
|
#
|
|
# Either @device or @node-name must be set but not both.
|
|
#
|
|
# @device: #optional the name of the block backend device to set the password on
|
|
#
|
|
# @node-name: #optional graph node name to set the password on (Since 2.0)
|
|
#
|
|
# @password: the password to use for the device
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
# If @device is not encrypted, DeviceNotEncrypted
|
|
#
|
|
# Notes: Not all block formats support encryption and some that do are not
|
|
# able to validate that a password is correct. Disk corruption may
|
|
# occur if an invalid password is specified.
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'command': 'block_passwd', 'data': {'*device': 'str',
|
|
'*node-name': 'str', 'password': 'str'} }
|
|
|
|
##
|
|
# @block_resize
|
|
#
|
|
# Resize a block image while a guest is running.
|
|
#
|
|
# Either @device or @node-name must be set but not both.
|
|
#
|
|
# @device: #optional the name of the device to get the image resized
|
|
#
|
|
# @node-name: #optional graph node name to get the image resized (Since 2.0)
|
|
#
|
|
# @size: new image size in bytes
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'command': 'block_resize', 'data': { '*device': 'str',
|
|
'*node-name': 'str',
|
|
'size': 'int' }}
|
|
|
|
##
|
|
# @NewImageMode
|
|
#
|
|
# An enumeration that tells QEMU how to set the backing file path in
|
|
# a new image file.
|
|
#
|
|
# @existing: QEMU should look for an existing image file.
|
|
#
|
|
# @absolute-paths: QEMU should create a new image with absolute paths
|
|
# for the backing file. If there is no backing file available, the new
|
|
# image will not be backed either.
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'enum': 'NewImageMode',
|
|
'data': [ 'existing', 'absolute-paths' ] }
|
|
|
|
##
|
|
# @BlockdevSnapshotSync
|
|
#
|
|
# Either @device or @node-name must be set but not both.
|
|
#
|
|
# @device: #optional the name of the device to generate the snapshot from.
|
|
#
|
|
# @node-name: #optional graph node name to generate the snapshot from (Since 2.0)
|
|
#
|
|
# @snapshot-file: the target of the new image. A new file will be created.
|
|
#
|
|
# @snapshot-node-name: #optional the graph node name of the new image (Since 2.0)
|
|
#
|
|
# @format: #optional the format of the snapshot image, default is 'qcow2'.
|
|
#
|
|
# @mode: #optional whether and how QEMU should create a new image, default is
|
|
# 'absolute-paths'.
|
|
##
|
|
{ 'struct': 'BlockdevSnapshotSync',
|
|
'data': { '*device': 'str', '*node-name': 'str',
|
|
'snapshot-file': 'str', '*snapshot-node-name': 'str',
|
|
'*format': 'str', '*mode': 'NewImageMode' } }
|
|
|
|
##
|
|
# @BlockdevSnapshot
|
|
#
|
|
# @node: device or node name that will have a snapshot created.
|
|
#
|
|
# @overlay: reference to the existing block device that will become
|
|
# the overlay of @node, as part of creating the snapshot.
|
|
# It must not have a current backing file (this can be
|
|
# achieved by passing "backing": "" to blockdev-add).
|
|
#
|
|
# Since 2.5
|
|
##
|
|
{ 'struct': 'BlockdevSnapshot',
|
|
'data': { 'node': 'str', 'overlay': 'str' } }
|
|
|
|
##
|
|
# @DriveBackup
|
|
#
|
|
# @device: the name of the device which should be copied.
|
|
#
|
|
# @target: the target of the new image. If the file exists, or if it
|
|
# is a device, the existing file/device will be used as the new
|
|
# destination. If it does not exist, a new file will be created.
|
|
#
|
|
# @format: #optional the format of the new destination, default is to
|
|
# probe if @mode is 'existing', else the format of the source
|
|
#
|
|
# @sync: what parts of the disk image should be copied to the destination
|
|
# (all the disk, only the sectors allocated in the topmost image, from a
|
|
# dirty bitmap, or only new I/O).
|
|
#
|
|
# @mode: #optional whether and how QEMU should create a new image, default is
|
|
# 'absolute-paths'.
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# @bitmap: #optional the name of dirty bitmap if sync is "incremental".
|
|
# Must be present if sync is "incremental", must NOT be present
|
|
# otherwise. (Since 2.4)
|
|
#
|
|
# @on-source-error: #optional the action to take on an error on the source,
|
|
# default 'report'. 'stop' and 'enospc' can only be used
|
|
# if the block device supports io-status (see BlockInfo).
|
|
#
|
|
# @on-target-error: #optional the action to take on an error on the target,
|
|
# default 'report' (no limitations, since this applies to
|
|
# a different block device than @device).
|
|
#
|
|
# Note that @on-source-error and @on-target-error only affect background I/O.
|
|
# If an error occurs during a guest write request, the device's rerror/werror
|
|
# actions will be used.
|
|
#
|
|
# Since: 1.6
|
|
##
|
|
{ 'struct': 'DriveBackup',
|
|
'data': { 'device': 'str', 'target': 'str', '*format': 'str',
|
|
'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
|
|
'*speed': 'int', '*bitmap': 'str',
|
|
'*on-source-error': 'BlockdevOnError',
|
|
'*on-target-error': 'BlockdevOnError' } }
|
|
|
|
##
|
|
# @BlockdevBackup
|
|
#
|
|
# @device: the name of the device which should be copied.
|
|
#
|
|
# @target: the name of the backup target device.
|
|
#
|
|
# @sync: what parts of the disk image should be copied to the destination
|
|
# (all the disk, only the sectors allocated in the topmost image, or
|
|
# only new I/O).
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second. The default is 0,
|
|
# for unlimited.
|
|
#
|
|
# @on-source-error: #optional the action to take on an error on the source,
|
|
# default 'report'. 'stop' and 'enospc' can only be used
|
|
# if the block device supports io-status (see BlockInfo).
|
|
#
|
|
# @on-target-error: #optional the action to take on an error on the target,
|
|
# default 'report' (no limitations, since this applies to
|
|
# a different block device than @device).
|
|
#
|
|
# Note that @on-source-error and @on-target-error only affect background I/O.
|
|
# If an error occurs during a guest write request, the device's rerror/werror
|
|
# actions will be used.
|
|
#
|
|
# Since: 2.3
|
|
##
|
|
{ 'struct': 'BlockdevBackup',
|
|
'data': { 'device': 'str', 'target': 'str',
|
|
'sync': 'MirrorSyncMode',
|
|
'*speed': 'int',
|
|
'*on-source-error': 'BlockdevOnError',
|
|
'*on-target-error': 'BlockdevOnError' } }
|
|
|
|
##
|
|
# @blockdev-snapshot-sync
|
|
#
|
|
# Generates a synchronous snapshot of a block device.
|
|
#
|
|
# For the arguments, see the documentation of BlockdevSnapshotSync.
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since 0.14.0
|
|
##
|
|
{ 'command': 'blockdev-snapshot-sync',
|
|
'data': 'BlockdevSnapshotSync' }
|
|
|
|
|
|
##
|
|
# @blockdev-snapshot
|
|
#
|
|
# Generates a snapshot of a block device.
|
|
#
|
|
# For the arguments, see the documentation of BlockdevSnapshot.
|
|
#
|
|
# Since 2.5
|
|
##
|
|
{ 'command': 'blockdev-snapshot',
|
|
'data': 'BlockdevSnapshot' }
|
|
|
|
##
|
|
# @change-backing-file
|
|
#
|
|
# Change the backing file in the image file metadata. This does not
|
|
# cause QEMU to reopen the image file to reparse the backing filename
|
|
# (it may, however, perform a reopen to change permissions from
|
|
# r/o -> r/w -> r/o, if needed). The new backing file string is written
|
|
# into the image file metadata, and the QEMU internal strings are
|
|
# updated.
|
|
#
|
|
# @image-node-name: The name of the block driver state node of the
|
|
# image to modify.
|
|
#
|
|
# @device: The name of the device that owns image-node-name.
|
|
#
|
|
# @backing-file: The string to write as the backing file. This
|
|
# string is not validated, so care should be taken
|
|
# when specifying the string or the image chain may
|
|
# not be able to be reopened again.
|
|
#
|
|
# Since: 2.1
|
|
##
|
|
{ 'command': 'change-backing-file',
|
|
'data': { 'device': 'str', 'image-node-name': 'str',
|
|
'backing-file': 'str' } }
|
|
|
|
##
|
|
# @block-commit
|
|
#
|
|
# Live commit of data from overlay image nodes into backing nodes - i.e.,
|
|
# writes data between 'top' and 'base' into 'base'.
|
|
#
|
|
# @device: the name of the device
|
|
#
|
|
# @base: #optional The file name of the backing image to write data into.
|
|
# If not specified, this is the deepest backing image
|
|
#
|
|
# @top: #optional The file name of the backing image within the image chain,
|
|
# which contains the topmost data to be committed down. If
|
|
# not specified, this is the active layer.
|
|
#
|
|
# @backing-file: #optional The backing file string to write into the overlay
|
|
# image of 'top'. If 'top' is the active layer,
|
|
# specifying a backing file string is an error. This
|
|
# filename is not validated.
|
|
#
|
|
# If a pathname string is such that it cannot be
|
|
# resolved by QEMU, that means that subsequent QMP or
|
|
# HMP commands must use node-names for the image in
|
|
# question, as filename lookup methods will fail.
|
|
#
|
|
# If not specified, QEMU will automatically determine
|
|
# the backing file string to use, or error out if
|
|
# there is no obvious choice. Care should be taken
|
|
# when specifying the string, to specify a valid
|
|
# filename or protocol.
|
|
# (Since 2.1)
|
|
#
|
|
# If top == base, that is an error.
|
|
# If top == active, the job will not be completed by itself,
|
|
# user needs to complete the job with the block-job-complete
|
|
# command after getting the ready event. (Since 2.0)
|
|
#
|
|
# If the base image is smaller than top, then the base image
|
|
# will be resized to be the same size as top. If top is
|
|
# smaller than the base image, the base will not be
|
|
# truncated. If you want the base image size to match the
|
|
# size of the smaller top, you can safely truncate it
|
|
# yourself once the commit operation successfully completes.
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# Returns: Nothing on success
|
|
# If commit or stream is already active on this device, DeviceInUse
|
|
# If @device does not exist, DeviceNotFound
|
|
# If image commit is not supported by this device, NotSupported
|
|
# If @base or @top is invalid, a generic error is returned
|
|
# If @speed is invalid, InvalidParameter
|
|
#
|
|
# Since: 1.3
|
|
#
|
|
##
|
|
{ 'command': 'block-commit',
|
|
'data': { 'device': 'str', '*base': 'str', '*top': 'str',
|
|
'*backing-file': 'str', '*speed': 'int' } }
|
|
|
|
##
|
|
# @drive-backup
|
|
#
|
|
# Start a point-in-time copy of a block device to a new destination. The
|
|
# status of ongoing drive-backup operations can be checked with
|
|
# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
|
|
# The operation can be stopped before it has completed using the
|
|
# block-job-cancel command.
|
|
#
|
|
# For the arguments, see the documentation of DriveBackup.
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since 1.6
|
|
##
|
|
{ 'command': 'drive-backup', 'data': 'DriveBackup' }
|
|
|
|
##
|
|
# @blockdev-backup
|
|
#
|
|
# Start a point-in-time copy of a block device to a new destination. The
|
|
# status of ongoing blockdev-backup operations can be checked with
|
|
# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
|
|
# The operation can be stopped before it has completed using the
|
|
# block-job-cancel command.
|
|
#
|
|
# For the arguments, see the documentation of BlockdevBackup.
|
|
#
|
|
# Since 2.3
|
|
##
|
|
{ 'command': 'blockdev-backup', 'data': 'BlockdevBackup' }
|
|
|
|
|
|
##
|
|
# @query-named-block-nodes
|
|
#
|
|
# Get the named block driver list
|
|
#
|
|
# Returns: the list of BlockDeviceInfo
|
|
#
|
|
# Since 2.0
|
|
##
|
|
{ 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] }
|
|
|
|
##
|
|
# @drive-mirror
|
|
#
|
|
# Start mirroring a block device's writes to a new destination.
|
|
#
|
|
# @device: the name of the device whose writes should be mirrored.
|
|
#
|
|
# @target: the target of the new image. If the file exists, or if it
|
|
# is a device, the existing file/device will be used as the new
|
|
# destination. If it does not exist, a new file will be created.
|
|
#
|
|
# @format: #optional the format of the new destination, default is to
|
|
# probe if @mode is 'existing', else the format of the source
|
|
#
|
|
# @node-name: #optional the new block driver state node name in the graph
|
|
# (Since 2.1)
|
|
#
|
|
# @replaces: #optional with sync=full graph node name to be replaced by the new
|
|
# image when a whole image copy is done. This can be used to repair
|
|
# broken Quorum files. (Since 2.1)
|
|
#
|
|
# @mode: #optional whether and how QEMU should create a new image, default is
|
|
# 'absolute-paths'.
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# @sync: what parts of the disk image should be copied to the destination
|
|
# (all the disk, only the sectors allocated in the topmost image, or
|
|
# only new I/O).
|
|
#
|
|
# @granularity: #optional granularity of the dirty bitmap, default is 64K
|
|
# if the image format doesn't have clusters, 4K if the clusters
|
|
# are smaller than that, else the cluster size. Must be a
|
|
# power of 2 between 512 and 64M (since 1.4).
|
|
#
|
|
# @buf-size: #optional maximum amount of data in flight from source to
|
|
# target (since 1.4).
|
|
#
|
|
# @on-source-error: #optional the action to take on an error on the source,
|
|
# default 'report'. 'stop' and 'enospc' can only be used
|
|
# if the block device supports io-status (see BlockInfo).
|
|
#
|
|
# @on-target-error: #optional the action to take on an error on the target,
|
|
# default 'report' (no limitations, since this applies to
|
|
# a different block device than @device).
|
|
# @unmap: #optional Whether to try to unmap target sectors where source has
|
|
# only zero. If true, and target unallocated sectors will read as zero,
|
|
# target image sectors will be unmapped; otherwise, zeroes will be
|
|
# written. Both will result in identical contents.
|
|
# Default is true. (Since 2.4)
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since 1.3
|
|
##
|
|
{ 'command': 'drive-mirror',
|
|
'data': { 'device': 'str', 'target': 'str', '*format': 'str',
|
|
'*node-name': 'str', '*replaces': 'str',
|
|
'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
|
|
'*speed': 'int', '*granularity': 'uint32',
|
|
'*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
|
|
'*on-target-error': 'BlockdevOnError',
|
|
'*unmap': 'bool' } }
|
|
|
|
##
|
|
# @BlockDirtyBitmap
|
|
#
|
|
# @node: name of device/node which the bitmap is tracking
|
|
#
|
|
# @name: name of the dirty bitmap
|
|
#
|
|
# Since 2.4
|
|
##
|
|
{ 'struct': 'BlockDirtyBitmap',
|
|
'data': { 'node': 'str', 'name': 'str' } }
|
|
|
|
##
|
|
# @BlockDirtyBitmapAdd
|
|
#
|
|
# @node: name of device/node which the bitmap is tracking
|
|
#
|
|
# @name: name of the dirty bitmap
|
|
#
|
|
# @granularity: #optional the bitmap granularity, default is 64k for
|
|
# block-dirty-bitmap-add
|
|
#
|
|
# Since 2.4
|
|
##
|
|
{ 'struct': 'BlockDirtyBitmapAdd',
|
|
'data': { 'node': 'str', 'name': 'str', '*granularity': 'uint32' } }
|
|
|
|
##
|
|
# @block-dirty-bitmap-add
|
|
#
|
|
# Create a dirty bitmap with a name on the node
|
|
#
|
|
# Returns: nothing on success
|
|
# If @node is not a valid block device or node, DeviceNotFound
|
|
# If @name is already taken, GenericError with an explanation
|
|
#
|
|
# Since 2.4
|
|
##
|
|
{ 'command': 'block-dirty-bitmap-add',
|
|
'data': 'BlockDirtyBitmapAdd' }
|
|
|
|
##
|
|
# @block-dirty-bitmap-remove
|
|
#
|
|
# Remove a dirty bitmap on the node
|
|
#
|
|
# Returns: nothing on success
|
|
# If @node is not a valid block device or node, DeviceNotFound
|
|
# If @name is not found, GenericError with an explanation
|
|
# if @name is frozen by an operation, GenericError
|
|
#
|
|
# Since 2.4
|
|
##
|
|
{ 'command': 'block-dirty-bitmap-remove',
|
|
'data': 'BlockDirtyBitmap' }
|
|
|
|
##
|
|
# @block-dirty-bitmap-clear
|
|
#
|
|
# Clear (reset) a dirty bitmap on the device
|
|
#
|
|
# Returns: nothing on success
|
|
# If @node is not a valid block device, DeviceNotFound
|
|
# If @name is not found, GenericError with an explanation
|
|
#
|
|
# Since 2.4
|
|
##
|
|
{ 'command': 'block-dirty-bitmap-clear',
|
|
'data': 'BlockDirtyBitmap' }
|
|
|
|
##
|
|
# @blockdev-mirror
|
|
#
|
|
# Start mirroring a block device's writes to a new destination.
|
|
#
|
|
# @device: the name of the device whose writes should be mirrored.
|
|
#
|
|
# @target: the id or node-name of the block device to mirror to. This mustn't be
|
|
# attached to guest.
|
|
#
|
|
# @replaces: #optional with sync=full graph node name to be replaced by the new
|
|
# image when a whole image copy is done. This can be used to repair
|
|
# broken Quorum files.
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# @sync: what parts of the disk image should be copied to the destination
|
|
# (all the disk, only the sectors allocated in the topmost image, or
|
|
# only new I/O).
|
|
#
|
|
# @granularity: #optional granularity of the dirty bitmap, default is 64K
|
|
# if the image format doesn't have clusters, 4K if the clusters
|
|
# are smaller than that, else the cluster size. Must be a
|
|
# power of 2 between 512 and 64M
|
|
#
|
|
# @buf-size: #optional maximum amount of data in flight from source to
|
|
# target
|
|
#
|
|
# @on-source-error: #optional the action to take on an error on the source,
|
|
# default 'report'. 'stop' and 'enospc' can only be used
|
|
# if the block device supports io-status (see BlockInfo).
|
|
#
|
|
# @on-target-error: #optional the action to take on an error on the target,
|
|
# default 'report' (no limitations, since this applies to
|
|
# a different block device than @device).
|
|
#
|
|
# Returns: nothing on success.
|
|
#
|
|
# Since 2.6
|
|
##
|
|
{ 'command': 'blockdev-mirror',
|
|
'data': { 'device': 'str', 'target': 'str',
|
|
'*replaces': 'str',
|
|
'sync': 'MirrorSyncMode',
|
|
'*speed': 'int', '*granularity': 'uint32',
|
|
'*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
|
|
'*on-target-error': 'BlockdevOnError' } }
|
|
|
|
##
|
|
# @block_set_io_throttle:
|
|
#
|
|
# Change I/O throttle limits for a block drive.
|
|
#
|
|
# Since QEMU 2.4, each device with I/O limits is member of a throttle
|
|
# group.
|
|
#
|
|
# If two or more devices are members of the same group, the limits
|
|
# will apply to the combined I/O of the whole group in a round-robin
|
|
# fashion. Therefore, setting new I/O limits to a device will affect
|
|
# the whole group.
|
|
#
|
|
# The name of the group can be specified using the 'group' parameter.
|
|
# If the parameter is unset, it is assumed to be the current group of
|
|
# that device. If it's not in any group yet, the name of the device
|
|
# will be used as the name for its group.
|
|
#
|
|
# The 'group' parameter can also be used to move a device to a
|
|
# different group. In this case the limits specified in the parameters
|
|
# will be applied to the new group only.
|
|
#
|
|
# I/O limits can be disabled by setting all of them to 0. In this case
|
|
# the device will be removed from its group and the rest of its
|
|
# members will not be affected. The 'group' parameter is ignored.
|
|
#
|
|
# @device: The name of the device
|
|
#
|
|
# @bps: total throughput limit in bytes per second
|
|
#
|
|
# @bps_rd: read throughput limit in bytes per second
|
|
#
|
|
# @bps_wr: write throughput limit in bytes per second
|
|
#
|
|
# @iops: total I/O operations per second
|
|
#
|
|
# @iops_rd: read I/O operations per second
|
|
#
|
|
# @iops_wr: write I/O operations per second
|
|
#
|
|
# @bps_max: #optional total throughput limit during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @bps_rd_max: #optional read throughput limit during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @bps_wr_max: #optional write throughput limit during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @iops_max: #optional total I/O operations per second during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @iops_rd_max: #optional read I/O operations per second during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @iops_wr_max: #optional write I/O operations per second during bursts,
|
|
# in bytes (Since 1.7)
|
|
#
|
|
# @bps_max_length: #optional maximum length of the @bps_max burst
|
|
# period, in seconds. It must only
|
|
# be set if @bps_max is set as well.
|
|
# Defaults to 1. (Since 2.6)
|
|
#
|
|
# @bps_rd_max_length: #optional maximum length of the @bps_rd_max
|
|
# burst period, in seconds. It must only
|
|
# be set if @bps_rd_max is set as well.
|
|
# Defaults to 1. (Since 2.6)
|
|
#
|
|
# @bps_wr_max_length: #optional maximum length of the @bps_wr_max
|
|
# burst period, in seconds. It must only
|
|
# be set if @bps_wr_max is set as well.
|
|
# Defaults to 1. (Since 2.6)
|
|
#
|
|
# @iops_max_length: #optional maximum length of the @iops burst
|
|
# period, in seconds. It must only
|
|
# be set if @iops_max is set as well.
|
|
# Defaults to 1. (Since 2.6)
|
|
#
|
|
# @iops_rd_max_length: #optional maximum length of the @iops_rd_max
|
|
# burst period, in seconds. It must only
|
|
# be set if @iops_rd_max is set as well.
|
|
# Defaults to 1. (Since 2.6)
|
|
#
|
|
# @iops_wr_max_length: #optional maximum length of the @iops_wr_max
|
|
# burst period, in seconds. It must only
|
|
# be set if @iops_wr_max is set as well.
|
|
# Defaults to 1. (Since 2.6)
|
|
#
|
|
# @iops_size: #optional an I/O size in bytes (Since 1.7)
|
|
#
|
|
# @group: #optional throttle group name (Since 2.4)
|
|
#
|
|
# Returns: Nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'block_set_io_throttle',
|
|
'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
|
|
'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
|
|
'*bps_max': 'int', '*bps_rd_max': 'int',
|
|
'*bps_wr_max': 'int', '*iops_max': 'int',
|
|
'*iops_rd_max': 'int', '*iops_wr_max': 'int',
|
|
'*bps_max_length': 'int', '*bps_rd_max_length': 'int',
|
|
'*bps_wr_max_length': 'int', '*iops_max_length': 'int',
|
|
'*iops_rd_max_length': 'int', '*iops_wr_max_length': 'int',
|
|
'*iops_size': 'int', '*group': 'str' } }
|
|
|
|
##
|
|
# @block-stream:
|
|
#
|
|
# Copy data from a backing file into a block device.
|
|
#
|
|
# The block streaming operation is performed in the background until the entire
|
|
# backing file has been copied. This command returns immediately once streaming
|
|
# has started. The status of ongoing block streaming operations can be checked
|
|
# with query-block-jobs. The operation can be stopped before it has completed
|
|
# using the block-job-cancel command.
|
|
#
|
|
# If a base file is specified then sectors are not copied from that base file and
|
|
# its backing chain. When streaming completes the image file will have the base
|
|
# file as its backing file. This can be used to stream a subset of the backing
|
|
# file chain instead of flattening the entire image.
|
|
#
|
|
# On successful completion the image file is updated to drop the backing file
|
|
# and the BLOCK_JOB_COMPLETED event is emitted.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# @base: #optional the common backing file name
|
|
#
|
|
# @backing-file: #optional The backing file string to write into the active
|
|
# layer. This filename is not validated.
|
|
#
|
|
# If a pathname string is such that it cannot be
|
|
# resolved by QEMU, that means that subsequent QMP or
|
|
# HMP commands must use node-names for the image in
|
|
# question, as filename lookup methods will fail.
|
|
#
|
|
# If not specified, QEMU will automatically determine
|
|
# the backing file string to use, or error out if there
|
|
# is no obvious choice. Care should be taken when
|
|
# specifying the string, to specify a valid filename or
|
|
# protocol.
|
|
# (Since 2.1)
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# @on-error: #optional the action to take on an error (default report).
|
|
# 'stop' and 'enospc' can only be used if the block device
|
|
# supports io-status (see BlockInfo). Since 1.3.
|
|
#
|
|
# Returns: Nothing on success
|
|
# If @device does not exist, DeviceNotFound
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'block-stream',
|
|
'data': { 'device': 'str', '*base': 'str', '*backing-file': 'str',
|
|
'*speed': 'int', '*on-error': 'BlockdevOnError' } }
|
|
|
|
##
|
|
# @block-job-set-speed:
|
|
#
|
|
# Set maximum speed for a background block operation.
|
|
#
|
|
# This command can only be issued when there is an active block job.
|
|
#
|
|
# Throttling can be disabled by setting the speed to 0.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# @speed: the maximum speed, in bytes per second, or 0 for unlimited.
|
|
# Defaults to 0.
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'block-job-set-speed',
|
|
'data': { 'device': 'str', 'speed': 'int' } }
|
|
|
|
##
|
|
# @block-job-cancel:
|
|
#
|
|
# Stop an active background block operation.
|
|
#
|
|
# This command returns immediately after marking the active background block
|
|
# operation for cancellation. It is an error to call this command if no
|
|
# operation is in progress.
|
|
#
|
|
# The operation will cancel as soon as possible and then emit the
|
|
# BLOCK_JOB_CANCELLED event. Before that happens the job is still visible when
|
|
# enumerated using query-block-jobs.
|
|
#
|
|
# For streaming, the image file retains its backing file unless the streaming
|
|
# operation happens to complete just as it is being cancelled. A new streaming
|
|
# operation can be started at a later time to finish copying all data from the
|
|
# backing file.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# @force: #optional whether to allow cancellation of a paused job (default
|
|
# false). Since 1.3.
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'block-job-cancel', 'data': { 'device': 'str', '*force': 'bool' } }
|
|
|
|
##
|
|
# @block-job-pause:
|
|
#
|
|
# Pause an active background block operation.
|
|
#
|
|
# This command returns immediately after marking the active background block
|
|
# operation for pausing. It is an error to call this command if no
|
|
# operation is in progress. Pausing an already paused job has no cumulative
|
|
# effect; a single block-job-resume command will resume the job.
|
|
#
|
|
# The operation will pause as soon as possible. No event is emitted when
|
|
# the operation is actually paused. Cancelling a paused job automatically
|
|
# resumes it.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'command': 'block-job-pause', 'data': { 'device': 'str' } }
|
|
|
|
##
|
|
# @block-job-resume:
|
|
#
|
|
# Resume an active background block operation.
|
|
#
|
|
# This command returns immediately after resuming a paused background block
|
|
# operation. It is an error to call this command if no operation is in
|
|
# progress. Resuming an already running job is not an error.
|
|
#
|
|
# This command also clears the error status of the job.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'command': 'block-job-resume', 'data': { 'device': 'str' } }
|
|
|
|
##
|
|
# @block-job-complete:
|
|
#
|
|
# Manually trigger completion of an active background block operation. This
|
|
# is supported for drive mirroring, where it also switches the device to
|
|
# write to the target path only. The ability to complete is signaled with
|
|
# a BLOCK_JOB_READY event.
|
|
#
|
|
# This command completes an active background block operation synchronously.
|
|
# The ordering of this command's return with the BLOCK_JOB_COMPLETED event
|
|
# is not defined. Note that if an I/O error occurs during the processing of
|
|
# this command: 1) the command itself will fail; 2) the error will be processed
|
|
# according to the rerror/werror arguments that were specified when starting
|
|
# the operation.
|
|
#
|
|
# A cancelled or paused job cannot be completed.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'command': 'block-job-complete', 'data': { 'device': 'str' } }
|
|
|
|
##
|
|
# @BlockdevDiscardOptions
|
|
#
|
|
# Determines how to handle discard requests.
|
|
#
|
|
# @ignore: Ignore the request
|
|
# @unmap: Forward as an unmap request
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'enum': 'BlockdevDiscardOptions',
|
|
'data': [ 'ignore', 'unmap' ] }
|
|
|
|
##
|
|
# @BlockdevDetectZeroesOptions
|
|
#
|
|
# Describes the operation mode for the automatic conversion of plain
|
|
# zero writes by the OS to driver specific optimized zero write commands.
|
|
#
|
|
# @off: Disabled (default)
|
|
# @on: Enabled
|
|
# @unmap: Enabled and even try to unmap blocks if possible. This requires
|
|
# also that @BlockdevDiscardOptions is set to unmap for this device.
|
|
#
|
|
# Since: 2.1
|
|
##
|
|
{ 'enum': 'BlockdevDetectZeroesOptions',
|
|
'data': [ 'off', 'on', 'unmap' ] }
|
|
|
|
##
|
|
# @BlockdevAioOptions
|
|
#
|
|
# Selects the AIO backend to handle I/O requests
|
|
#
|
|
# @threads: Use qemu's thread pool
|
|
# @native: Use native AIO backend (only Linux and Windows)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'enum': 'BlockdevAioOptions',
|
|
'data': [ 'threads', 'native' ] }
|
|
|
|
##
|
|
# @BlockdevCacheOptions
|
|
#
|
|
# Includes cache-related options for block devices
|
|
#
|
|
# @direct: #optional enables use of O_DIRECT (bypass the host page cache;
|
|
# default: false)
|
|
# @no-flush: #optional ignore any flush requests for the device (default:
|
|
# false)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'struct': 'BlockdevCacheOptions',
|
|
'data': { '*direct': 'bool',
|
|
'*no-flush': 'bool' } }
|
|
|
|
##
|
|
# @BlockdevDriver
|
|
#
|
|
# Drivers that are supported in block device operations.
|
|
#
|
|
# @host_device, @host_cdrom: Since 2.1
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'enum': 'BlockdevDriver',
|
|
'data': [ 'archipelago', 'blkdebug', 'blkverify', 'bochs', 'cloop',
|
|
'dmg', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
|
|
'http', 'https', 'luks', 'null-aio', 'null-co', 'parallels',
|
|
'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'tftp', 'vdi', 'vhdx',
|
|
'vmdk', 'vpc', 'vvfat' ] }
|
|
|
|
##
|
|
# @BlockdevOptionsFile
|
|
#
|
|
# Driver specific block device options for the file backend and similar
|
|
# protocols.
|
|
#
|
|
# @filename: path to the image file
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'struct': 'BlockdevOptionsFile',
|
|
'data': { 'filename': 'str' } }
|
|
|
|
##
|
|
# @BlockdevOptionsNull
|
|
#
|
|
# Driver specific block device options for the null backend.
|
|
#
|
|
# @size: #optional size of the device in bytes.
|
|
# @latency-ns: #optional emulated latency (in nanoseconds) in processing
|
|
# requests. Default to zero which completes requests immediately.
|
|
# (Since 2.4)
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'struct': 'BlockdevOptionsNull',
|
|
'data': { '*size': 'int', '*latency-ns': 'uint64' } }
|
|
|
|
##
|
|
# @BlockdevOptionsVVFAT
|
|
#
|
|
# Driver specific block device options for the vvfat protocol.
|
|
#
|
|
# @dir: directory to be exported as FAT image
|
|
# @fat-type: #optional FAT type: 12, 16 or 32
|
|
# @floppy: #optional whether to export a floppy image (true) or
|
|
# partitioned hard disk (false; default)
|
|
# @label: #optional set the volume label, limited to 11 bytes. FAT16 and
|
|
# FAT32 traditionally have some restrictions on labels, which are
|
|
# ignored by most operating systems. Defaults to "QEMU VVFAT".
|
|
# (since 2.4)
|
|
# @rw: #optional whether to allow write operations (default: false)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'struct': 'BlockdevOptionsVVFAT',
|
|
'data': { 'dir': 'str', '*fat-type': 'int', '*floppy': 'bool',
|
|
'*label': 'str', '*rw': 'bool' } }
|
|
|
|
##
|
|
# @BlockdevOptionsGenericFormat
|
|
#
|
|
# Driver specific block device options for image format that have no option
|
|
# besides their data source.
|
|
#
|
|
# @file: reference to or definition of the data source block device
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'struct': 'BlockdevOptionsGenericFormat',
|
|
'data': { 'file': 'BlockdevRef' } }
|
|
|
|
##
|
|
# @BlockdevOptionsLUKS
|
|
#
|
|
# Driver specific block device options for LUKS.
|
|
#
|
|
# @key-secret: #optional the ID of a QCryptoSecret object providing
|
|
# the decryption key (since 2.6). Mandatory except when
|
|
# doing a metadata-only probe of the image.
|
|
#
|
|
# Since: 2.6
|
|
##
|
|
{ 'struct': 'BlockdevOptionsLUKS',
|
|
'base': 'BlockdevOptionsGenericFormat',
|
|
'data': { '*key-secret': 'str' } }
|
|
|
|
|
|
##
|
|
# @BlockdevOptionsGenericCOWFormat
|
|
#
|
|
# Driver specific block device options for image format that have no option
|
|
# besides their data source and an optional backing file.
|
|
#
|
|
# @backing: #optional reference to or definition of the backing file block
|
|
# device (if missing, taken from the image file content). It is
|
|
# allowed to pass an empty string here in order to disable the
|
|
# default backing file.
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'struct': 'BlockdevOptionsGenericCOWFormat',
|
|
'base': 'BlockdevOptionsGenericFormat',
|
|
'data': { '*backing': 'BlockdevRef' } }
|
|
|
|
##
|
|
# @Qcow2OverlapCheckMode
|
|
#
|
|
# General overlap check modes.
|
|
#
|
|
# @none: Do not perform any checks
|
|
#
|
|
# @constant: Perform only checks which can be done in constant time and
|
|
# without reading anything from disk
|
|
#
|
|
# @cached: Perform only checks which can be done without reading anything
|
|
# from disk
|
|
#
|
|
# @all: Perform all available overlap checks
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'enum': 'Qcow2OverlapCheckMode',
|
|
'data': [ 'none', 'constant', 'cached', 'all' ] }
|
|
|
|
##
|
|
# @Qcow2OverlapCheckFlags
|
|
#
|
|
# Structure of flags for each metadata structure. Setting a field to 'true'
|
|
# makes qemu guard that structure against unintended overwriting. The default
|
|
# value is chosen according to the template given.
|
|
#
|
|
# @template: Specifies a template mode which can be adjusted using the other
|
|
# flags, defaults to 'cached'
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'struct': 'Qcow2OverlapCheckFlags',
|
|
'data': { '*template': 'Qcow2OverlapCheckMode',
|
|
'*main-header': 'bool',
|
|
'*active-l1': 'bool',
|
|
'*active-l2': 'bool',
|
|
'*refcount-table': 'bool',
|
|
'*refcount-block': 'bool',
|
|
'*snapshot-table': 'bool',
|
|
'*inactive-l1': 'bool',
|
|
'*inactive-l2': 'bool' } }
|
|
|
|
##
|
|
# @Qcow2OverlapChecks
|
|
#
|
|
# Specifies which metadata structures should be guarded against unintended
|
|
# overwriting.
|
|
#
|
|
# @flags: set of flags for separate specification of each metadata structure
|
|
# type
|
|
#
|
|
# @mode: named mode which chooses a specific set of flags
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'alternate': 'Qcow2OverlapChecks',
|
|
'data': { 'flags': 'Qcow2OverlapCheckFlags',
|
|
'mode': 'Qcow2OverlapCheckMode' } }
|
|
|
|
##
|
|
# @BlockdevOptionsQcow2
|
|
#
|
|
# Driver specific block device options for qcow2.
|
|
#
|
|
# @lazy-refcounts: #optional whether to enable the lazy refcounts
|
|
# feature (default is taken from the image file)
|
|
#
|
|
# @pass-discard-request: #optional whether discard requests to the qcow2
|
|
# device should be forwarded to the data source
|
|
#
|
|
# @pass-discard-snapshot: #optional whether discard requests for the data source
|
|
# should be issued when a snapshot operation (e.g.
|
|
# deleting a snapshot) frees clusters in the qcow2 file
|
|
#
|
|
# @pass-discard-other: #optional whether discard requests for the data source
|
|
# should be issued on other occasions where a cluster
|
|
# gets freed
|
|
#
|
|
# @overlap-check: #optional which overlap checks to perform for writes
|
|
# to the image, defaults to 'cached' (since 2.2)
|
|
#
|
|
# @cache-size: #optional the maximum total size of the L2 table and
|
|
# refcount block caches in bytes (since 2.2)
|
|
#
|
|
# @l2-cache-size: #optional the maximum size of the L2 table cache in
|
|
# bytes (since 2.2)
|
|
#
|
|
# @refcount-cache-size: #optional the maximum size of the refcount block cache
|
|
# in bytes (since 2.2)
|
|
#
|
|
# @cache-clean-interval: #optional clean unused entries in the L2 and refcount
|
|
# caches. The interval is in seconds. The default value
|
|
# is 0 and it disables this feature (since 2.5)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'struct': 'BlockdevOptionsQcow2',
|
|
'base': 'BlockdevOptionsGenericCOWFormat',
|
|
'data': { '*lazy-refcounts': 'bool',
|
|
'*pass-discard-request': 'bool',
|
|
'*pass-discard-snapshot': 'bool',
|
|
'*pass-discard-other': 'bool',
|
|
'*overlap-check': 'Qcow2OverlapChecks',
|
|
'*cache-size': 'int',
|
|
'*l2-cache-size': 'int',
|
|
'*refcount-cache-size': 'int',
|
|
'*cache-clean-interval': 'int' } }
|
|
|
|
|
|
##
|
|
# @BlockdevOptionsArchipelago
|
|
#
|
|
# Driver specific block device options for Archipelago.
|
|
#
|
|
# @volume: Name of the Archipelago volume image
|
|
#
|
|
# @mport: #optional The port number on which mapperd is
|
|
# listening. This is optional
|
|
# and if not specified, QEMU will make Archipelago
|
|
# use the default port (1001).
|
|
#
|
|
# @vport: #optional The port number on which vlmcd is
|
|
# listening. This is optional
|
|
# and if not specified, QEMU will make Archipelago
|
|
# use the default port (501).
|
|
#
|
|
# @segment: #optional The name of the shared memory segment
|
|
# Archipelago stack is using. This is optional
|
|
# and if not specified, QEMU will make Archipelago
|
|
# use the default value, 'archipelago'.
|
|
# Since: 2.2
|
|
##
|
|
{ 'struct': 'BlockdevOptionsArchipelago',
|
|
'data': { 'volume': 'str',
|
|
'*mport': 'int',
|
|
'*vport': 'int',
|
|
'*segment': 'str' } }
|
|
|
|
|
|
##
|
|
# @BlkdebugEvent
|
|
#
|
|
# Trigger events supported by blkdebug.
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'enum': 'BlkdebugEvent', 'prefix': 'BLKDBG',
|
|
'data': [ 'l1_update', 'l1_grow_alloc_table', 'l1_grow_write_table',
|
|
'l1_grow_activate_table', 'l2_load', 'l2_update',
|
|
'l2_update_compressed', 'l2_alloc_cow_read', 'l2_alloc_write',
|
|
'read_aio', 'read_backing_aio', 'read_compressed', 'write_aio',
|
|
'write_compressed', 'vmstate_load', 'vmstate_save', 'cow_read',
|
|
'cow_write', 'reftable_load', 'reftable_grow', 'reftable_update',
|
|
'refblock_load', 'refblock_update', 'refblock_update_part',
|
|
'refblock_alloc', 'refblock_alloc_hookup', 'refblock_alloc_write',
|
|
'refblock_alloc_write_blocks', 'refblock_alloc_write_table',
|
|
'refblock_alloc_switch_table', 'cluster_alloc',
|
|
'cluster_alloc_bytes', 'cluster_free', 'flush_to_os',
|
|
'flush_to_disk', 'pwritev_rmw_head', 'pwritev_rmw_after_head',
|
|
'pwritev_rmw_tail', 'pwritev_rmw_after_tail', 'pwritev',
|
|
'pwritev_zero', 'pwritev_done', 'empty_image_prepare' ] }
|
|
|
|
##
|
|
# @BlkdebugInjectErrorOptions
|
|
#
|
|
# Describes a single error injection for blkdebug.
|
|
#
|
|
# @event: trigger event
|
|
#
|
|
# @state: #optional the state identifier blkdebug needs to be in to
|
|
# actually trigger the event; defaults to "any"
|
|
#
|
|
# @errno: #optional error identifier (errno) to be returned; defaults to
|
|
# EIO
|
|
#
|
|
# @sector: #optional specifies the sector index which has to be affected
|
|
# in order to actually trigger the event; defaults to "any
|
|
# sector"
|
|
#
|
|
# @once: #optional disables further events after this one has been
|
|
# triggered; defaults to false
|
|
#
|
|
# @immediately: #optional fail immediately; defaults to false
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'struct': 'BlkdebugInjectErrorOptions',
|
|
'data': { 'event': 'BlkdebugEvent',
|
|
'*state': 'int',
|
|
'*errno': 'int',
|
|
'*sector': 'int',
|
|
'*once': 'bool',
|
|
'*immediately': 'bool' } }
|
|
|
|
##
|
|
# @BlkdebugSetStateOptions
|
|
#
|
|
# Describes a single state-change event for blkdebug.
|
|
#
|
|
# @event: trigger event
|
|
#
|
|
# @state: #optional the current state identifier blkdebug needs to be in;
|
|
# defaults to "any"
|
|
#
|
|
# @new_state: the state identifier blkdebug is supposed to assume if
|
|
# this event is triggered
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'struct': 'BlkdebugSetStateOptions',
|
|
'data': { 'event': 'BlkdebugEvent',
|
|
'*state': 'int',
|
|
'new_state': 'int' } }
|
|
|
|
##
|
|
# @BlockdevOptionsBlkdebug
|
|
#
|
|
# Driver specific block device options for blkdebug.
|
|
#
|
|
# @image: underlying raw block device (or image file)
|
|
#
|
|
# @config: #optional filename of the configuration file
|
|
#
|
|
# @align: #optional required alignment for requests in bytes
|
|
#
|
|
# @inject-error: #optional array of error injection descriptions
|
|
#
|
|
# @set-state: #optional array of state-change descriptions
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'struct': 'BlockdevOptionsBlkdebug',
|
|
'data': { 'image': 'BlockdevRef',
|
|
'*config': 'str',
|
|
'*align': 'int',
|
|
'*inject-error': ['BlkdebugInjectErrorOptions'],
|
|
'*set-state': ['BlkdebugSetStateOptions'] } }
|
|
|
|
##
|
|
# @BlockdevOptionsBlkverify
|
|
#
|
|
# Driver specific block device options for blkverify.
|
|
#
|
|
# @test: block device to be tested
|
|
#
|
|
# @raw: raw image used for verification
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'struct': 'BlockdevOptionsBlkverify',
|
|
'data': { 'test': 'BlockdevRef',
|
|
'raw': 'BlockdevRef' } }
|
|
|
|
##
|
|
# @QuorumReadPattern
|
|
#
|
|
# An enumeration of quorum read patterns.
|
|
#
|
|
# @quorum: read all the children and do a quorum vote on reads
|
|
#
|
|
# @fifo: read only from the first child that has not failed
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'enum': 'QuorumReadPattern', 'data': [ 'quorum', 'fifo' ] }
|
|
|
|
##
|
|
# @BlockdevOptionsQuorum
|
|
#
|
|
# Driver specific block device options for Quorum
|
|
#
|
|
# @blkverify: #optional true if the driver must print content mismatch
|
|
# set to false by default
|
|
#
|
|
# @children: the children block devices to use
|
|
#
|
|
# @vote-threshold: the vote limit under which a read will fail
|
|
#
|
|
# @rewrite-corrupted: #optional rewrite corrupted data when quorum is reached
|
|
# (Since 2.1)
|
|
#
|
|
# @read-pattern: #optional choose read pattern and set to quorum by default
|
|
# (Since 2.2)
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'struct': 'BlockdevOptionsQuorum',
|
|
'data': { '*blkverify': 'bool',
|
|
'children': [ 'BlockdevRef' ],
|
|
'vote-threshold': 'int',
|
|
'*rewrite-corrupted': 'bool',
|
|
'*read-pattern': 'QuorumReadPattern' } }
|
|
|
|
##
|
|
# @BlockdevOptions
|
|
#
|
|
# Options for creating a block device. Many options are available for all
|
|
# block devices, independent of the block driver:
|
|
#
|
|
# @driver: block driver name
|
|
# @id: #optional id by which the new block device can be referred to.
|
|
# This option is only allowed on the top level of blockdev-add.
|
|
# A BlockBackend will be created by blockdev-add if and only if
|
|
# this option is given.
|
|
# @node-name: #optional the name of a block driver state node (Since 2.0).
|
|
# This option is required on the top level of blockdev-add if
|
|
# the @id option is not given there.
|
|
# @discard: #optional discard-related options (default: ignore)
|
|
# @cache: #optional cache-related options
|
|
# @aio: #optional AIO backend (default: threads)
|
|
# @rerror: #optional how to handle read errors on the device
|
|
# (default: report)
|
|
# @werror: #optional how to handle write errors on the device
|
|
# (default: enospc)
|
|
# @read-only: #optional whether the block device should be read-only
|
|
# (default: false)
|
|
# @stats-account-invalid: #optional whether to include invalid
|
|
# operations when computing last access statistics
|
|
# (default: true) (Since 2.5)
|
|
# @stats-account-failed: #optional whether to include failed
|
|
# operations when computing latency and last
|
|
# access statistics (default: true) (Since 2.5)
|
|
# @stats-intervals: #optional list of intervals for collecting I/O
|
|
# statistics, in seconds (default: none) (Since 2.5)
|
|
# @detect-zeroes: #optional detect and optimize zero writes (Since 2.1)
|
|
# (default: off)
|
|
#
|
|
# Remaining options are determined by the block driver.
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'union': 'BlockdevOptions',
|
|
'base': { 'driver': 'BlockdevDriver',
|
|
'*id': 'str',
|
|
'*node-name': 'str',
|
|
'*discard': 'BlockdevDiscardOptions',
|
|
'*cache': 'BlockdevCacheOptions',
|
|
'*aio': 'BlockdevAioOptions',
|
|
'*rerror': 'BlockdevOnError',
|
|
'*werror': 'BlockdevOnError',
|
|
'*read-only': 'bool',
|
|
'*stats-account-invalid': 'bool',
|
|
'*stats-account-failed': 'bool',
|
|
'*stats-intervals': ['int'],
|
|
'*detect-zeroes': 'BlockdevDetectZeroesOptions' },
|
|
'discriminator': 'driver',
|
|
'data': {
|
|
'archipelago':'BlockdevOptionsArchipelago',
|
|
'blkdebug': 'BlockdevOptionsBlkdebug',
|
|
'blkverify': 'BlockdevOptionsBlkverify',
|
|
'bochs': 'BlockdevOptionsGenericFormat',
|
|
'cloop': 'BlockdevOptionsGenericFormat',
|
|
'dmg': 'BlockdevOptionsGenericFormat',
|
|
'file': 'BlockdevOptionsFile',
|
|
'ftp': 'BlockdevOptionsFile',
|
|
'ftps': 'BlockdevOptionsFile',
|
|
# TODO gluster: Wait for structured options
|
|
'host_cdrom': 'BlockdevOptionsFile',
|
|
'host_device':'BlockdevOptionsFile',
|
|
'http': 'BlockdevOptionsFile',
|
|
'https': 'BlockdevOptionsFile',
|
|
# TODO iscsi: Wait for structured options
|
|
'luks': 'BlockdevOptionsLUKS',
|
|
# TODO nbd: Should take InetSocketAddress for 'host'?
|
|
# TODO nfs: Wait for structured options
|
|
'null-aio': 'BlockdevOptionsNull',
|
|
'null-co': 'BlockdevOptionsNull',
|
|
'parallels': 'BlockdevOptionsGenericFormat',
|
|
'qcow2': 'BlockdevOptionsQcow2',
|
|
'qcow': 'BlockdevOptionsGenericCOWFormat',
|
|
'qed': 'BlockdevOptionsGenericCOWFormat',
|
|
'quorum': 'BlockdevOptionsQuorum',
|
|
'raw': 'BlockdevOptionsGenericFormat',
|
|
# TODO rbd: Wait for structured options
|
|
# TODO sheepdog: Wait for structured options
|
|
# TODO ssh: Should take InetSocketAddress for 'host'?
|
|
'tftp': 'BlockdevOptionsFile',
|
|
'vdi': 'BlockdevOptionsGenericFormat',
|
|
'vhdx': 'BlockdevOptionsGenericFormat',
|
|
'vmdk': 'BlockdevOptionsGenericCOWFormat',
|
|
'vpc': 'BlockdevOptionsGenericFormat',
|
|
'vvfat': 'BlockdevOptionsVVFAT'
|
|
} }
|
|
|
|
##
|
|
# @BlockdevRef
|
|
#
|
|
# Reference to a block device.
|
|
#
|
|
# @definition: defines a new block device inline
|
|
# @reference: references the ID of an existing block device. An
|
|
# empty string means that no block device should be
|
|
# referenced.
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'alternate': 'BlockdevRef',
|
|
'data': { 'definition': 'BlockdevOptions',
|
|
'reference': 'str' } }
|
|
|
|
##
|
|
# @blockdev-add:
|
|
#
|
|
# Creates a new block device. If the @id option is given at the top level, a
|
|
# BlockBackend will be created; otherwise, @node-name is mandatory at the top
|
|
# level and no BlockBackend will be created.
|
|
#
|
|
# This command is still a work in progress. It doesn't support all
|
|
# block drivers among other things. Stay away from it unless you want
|
|
# to help with its development.
|
|
#
|
|
# @options: block device options for the new device
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'command': 'blockdev-add', 'data': { 'options': 'BlockdevOptions' } }
|
|
|
|
##
|
|
# @x-blockdev-del:
|
|
#
|
|
# Deletes a block device that has been added using blockdev-add.
|
|
# The selected device can be either a block backend or a graph node.
|
|
#
|
|
# In the former case the backend will be destroyed, along with its
|
|
# inserted medium if there's any. The command will fail if the backend
|
|
# or its medium are in use.
|
|
#
|
|
# In the latter case the node will be destroyed. The command will fail
|
|
# if the node is attached to a block backend or is otherwise being
|
|
# used.
|
|
#
|
|
# One of @id or @node-name must be specified, but not both.
|
|
#
|
|
# This command is still a work in progress and is considered
|
|
# experimental. Stay away from it unless you want to help with its
|
|
# development.
|
|
#
|
|
# @id: #optional Name of the block backend device to delete.
|
|
#
|
|
# @node-name: #optional Name of the graph node to delete.
|
|
#
|
|
# Since: 2.5
|
|
##
|
|
{ 'command': 'x-blockdev-del', 'data': { '*id': 'str', '*node-name': 'str' } }
|
|
|
|
##
|
|
# @blockdev-open-tray:
|
|
#
|
|
# Opens a block device's tray. If there is a block driver state tree inserted as
|
|
# a medium, it will become inaccessible to the guest (but it will remain
|
|
# associated to the block device, so closing the tray will make it accessible
|
|
# again).
|
|
#
|
|
# If the tray was already open before, this will be a no-op.
|
|
#
|
|
# Once the tray opens, a DEVICE_TRAY_MOVED event is emitted. There are cases in
|
|
# which no such event will be generated, these include:
|
|
# - if the guest has locked the tray, @force is false and the guest does not
|
|
# respond to the eject request
|
|
# - if the BlockBackend denoted by @device does not have a guest device attached
|
|
# to it
|
|
# - if the guest device does not have an actual tray
|
|
#
|
|
# @device: block device name
|
|
#
|
|
# @force: #optional if false (the default), an eject request will be sent to
|
|
# the guest if it has locked the tray (and the tray will not be opened
|
|
# immediately); if true, the tray will be opened regardless of whether
|
|
# it is locked
|
|
#
|
|
# Since: 2.5
|
|
##
|
|
{ 'command': 'blockdev-open-tray',
|
|
'data': { 'device': 'str',
|
|
'*force': 'bool' } }
|
|
|
|
##
|
|
# @blockdev-close-tray:
|
|
#
|
|
# Closes a block device's tray. If there is a block driver state tree associated
|
|
# with the block device (which is currently ejected), that tree will be loaded
|
|
# as the medium.
|
|
#
|
|
# If the tray was already closed before, this will be a no-op.
|
|
#
|
|
# @device: block device name
|
|
#
|
|
# Since: 2.5
|
|
##
|
|
{ 'command': 'blockdev-close-tray',
|
|
'data': { 'device': 'str' } }
|
|
|
|
##
|
|
# @x-blockdev-remove-medium:
|
|
#
|
|
# Removes a medium (a block driver state tree) from a block device. That block
|
|
# device's tray must currently be open (unless there is no attached guest
|
|
# device).
|
|
#
|
|
# If the tray is open and there is no medium inserted, this will be a no-op.
|
|
#
|
|
# This command is still a work in progress and is considered experimental.
|
|
# Stay away from it unless you want to help with its development.
|
|
#
|
|
# @device: block device name
|
|
#
|
|
# Since: 2.5
|
|
##
|
|
{ 'command': 'x-blockdev-remove-medium',
|
|
'data': { 'device': 'str' } }
|
|
|
|
##
|
|
# @x-blockdev-insert-medium:
|
|
#
|
|
# Inserts a medium (a block driver state tree) into a block device. That block
|
|
# device's tray must currently be open (unless there is no attached guest
|
|
# device) and there must be no medium inserted already.
|
|
#
|
|
# This command is still a work in progress and is considered experimental.
|
|
# Stay away from it unless you want to help with its development.
|
|
#
|
|
# @device: block device name
|
|
#
|
|
# @node-name: name of a node in the block driver state graph
|
|
#
|
|
# Since: 2.5
|
|
##
|
|
{ 'command': 'x-blockdev-insert-medium',
|
|
'data': { 'device': 'str',
|
|
'node-name': 'str'} }
|
|
|
|
|
|
##
|
|
# @BlockdevChangeReadOnlyMode:
|
|
#
|
|
# Specifies the new read-only mode of a block device subject to the
|
|
# @blockdev-change-medium command.
|
|
#
|
|
# @retain: Retains the current read-only mode
|
|
#
|
|
# @read-only: Makes the device read-only
|
|
#
|
|
# @read-write: Makes the device writable
|
|
#
|
|
# Since: 2.3
|
|
##
|
|
{ 'enum': 'BlockdevChangeReadOnlyMode',
|
|
'data': ['retain', 'read-only', 'read-write'] }
|
|
|
|
|
|
##
|
|
# @blockdev-change-medium:
|
|
#
|
|
# Changes the medium inserted into a block device by ejecting the current medium
|
|
# and loading a new image file which is inserted as the new medium (this command
|
|
# combines blockdev-open-tray, x-blockdev-remove-medium,
|
|
# x-blockdev-insert-medium and blockdev-close-tray).
|
|
#
|
|
# @device: block device name
|
|
#
|
|
# @filename: filename of the new image to be loaded
|
|
#
|
|
# @format: #optional, format to open the new image with (defaults to
|
|
# the probed format)
|
|
#
|
|
# @read-only-mode: #optional, change the read-only mode of the device; defaults
|
|
# to 'retain'
|
|
#
|
|
# Since: 2.5
|
|
##
|
|
{ 'command': 'blockdev-change-medium',
|
|
'data': { 'device': 'str',
|
|
'filename': 'str',
|
|
'*format': 'str',
|
|
'*read-only-mode': 'BlockdevChangeReadOnlyMode' } }
|
|
|
|
|
|
##
|
|
# @BlockErrorAction
|
|
#
|
|
# An enumeration of action that has been taken when a DISK I/O occurs
|
|
#
|
|
# @ignore: error has been ignored
|
|
#
|
|
# @report: error has been reported to the device
|
|
#
|
|
# @stop: error caused VM to be stopped
|
|
#
|
|
# Since: 2.1
|
|
##
|
|
{ 'enum': 'BlockErrorAction',
|
|
'data': [ 'ignore', 'report', 'stop' ] }
|
|
|
|
|
|
##
|
|
# @BLOCK_IMAGE_CORRUPTED
|
|
#
|
|
# Emitted when a corruption has been detected in a disk image
|
|
#
|
|
# @device: device name. This is always present for compatibility
|
|
# reasons, but it can be empty ("") if the image does not
|
|
# have a device name associated.
|
|
#
|
|
# @node-name: #optional node name (Since: 2.4)
|
|
#
|
|
# @msg: informative message for human consumption, such as the kind of
|
|
# corruption being detected. It should not be parsed by machine as it is
|
|
# not guaranteed to be stable
|
|
#
|
|
# @offset: #optional, if the corruption resulted from an image access, this is
|
|
# the host's access offset into the image
|
|
#
|
|
# @size: #optional, if the corruption resulted from an image access, this is
|
|
# the access size
|
|
#
|
|
# fatal: if set, the image is marked corrupt and therefore unusable after this
|
|
# event and must be repaired (Since 2.2; before, every
|
|
# BLOCK_IMAGE_CORRUPTED event was fatal)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'event': 'BLOCK_IMAGE_CORRUPTED',
|
|
'data': { 'device' : 'str',
|
|
'*node-name' : 'str',
|
|
'msg' : 'str',
|
|
'*offset' : 'int',
|
|
'*size' : 'int',
|
|
'fatal' : 'bool' } }
|
|
|
|
##
|
|
# @BLOCK_IO_ERROR
|
|
#
|
|
# Emitted when a disk I/O error occurs
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @operation: I/O operation
|
|
#
|
|
# @action: action that has been taken
|
|
#
|
|
# @nospace: #optional true if I/O error was caused due to a no-space
|
|
# condition. This key is only present if query-block's
|
|
# io-status is present, please see query-block documentation
|
|
# for more information (since: 2.2)
|
|
#
|
|
# @reason: human readable string describing the error cause.
|
|
# (This field is a debugging aid for humans, it should not
|
|
# be parsed by applications) (since: 2.2)
|
|
#
|
|
# Note: If action is "stop", a STOP event will eventually follow the
|
|
# BLOCK_IO_ERROR event
|
|
#
|
|
# Since: 0.13.0
|
|
##
|
|
{ 'event': 'BLOCK_IO_ERROR',
|
|
'data': { 'device': 'str', 'operation': 'IoOperationType',
|
|
'action': 'BlockErrorAction', '*nospace': 'bool',
|
|
'reason': 'str' } }
|
|
|
|
##
|
|
# @BLOCK_JOB_COMPLETED
|
|
#
|
|
# Emitted when a block job has completed
|
|
#
|
|
# @type: job type
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @len: maximum progress value
|
|
#
|
|
# @offset: current progress value. On success this is equal to len.
|
|
# On failure this is less than len
|
|
#
|
|
# @speed: rate limit, bytes per second
|
|
#
|
|
# @error: #optional, error message. Only present on failure. This field
|
|
# contains a human-readable error message. There are no semantics
|
|
# other than that streaming has failed and clients should not try to
|
|
# interpret the error string
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'event': 'BLOCK_JOB_COMPLETED',
|
|
'data': { 'type' : 'BlockJobType',
|
|
'device': 'str',
|
|
'len' : 'int',
|
|
'offset': 'int',
|
|
'speed' : 'int',
|
|
'*error': 'str' } }
|
|
|
|
##
|
|
# @BLOCK_JOB_CANCELLED
|
|
#
|
|
# Emitted when a block job has been cancelled
|
|
#
|
|
# @type: job type
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @len: maximum progress value
|
|
#
|
|
# @offset: current progress value. On success this is equal to len.
|
|
# On failure this is less than len
|
|
#
|
|
# @speed: rate limit, bytes per second
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'event': 'BLOCK_JOB_CANCELLED',
|
|
'data': { 'type' : 'BlockJobType',
|
|
'device': 'str',
|
|
'len' : 'int',
|
|
'offset': 'int',
|
|
'speed' : 'int' } }
|
|
|
|
##
|
|
# @BLOCK_JOB_ERROR
|
|
#
|
|
# Emitted when a block job encounters an error
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @operation: I/O operation
|
|
#
|
|
# @action: action that has been taken
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'event': 'BLOCK_JOB_ERROR',
|
|
'data': { 'device' : 'str',
|
|
'operation': 'IoOperationType',
|
|
'action' : 'BlockErrorAction' } }
|
|
|
|
##
|
|
# @BLOCK_JOB_READY
|
|
#
|
|
# Emitted when a block job is ready to complete
|
|
#
|
|
# @type: job type
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @len: maximum progress value
|
|
#
|
|
# @offset: current progress value. On success this is equal to len.
|
|
# On failure this is less than len
|
|
#
|
|
# @speed: rate limit, bytes per second
|
|
#
|
|
# Note: The "ready to complete" status is always reset by a @BLOCK_JOB_ERROR
|
|
# event
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'event': 'BLOCK_JOB_READY',
|
|
'data': { 'type' : 'BlockJobType',
|
|
'device': 'str',
|
|
'len' : 'int',
|
|
'offset': 'int',
|
|
'speed' : 'int' } }
|
|
|
|
# @PreallocMode
|
|
#
|
|
# Preallocation mode of QEMU image file
|
|
#
|
|
# @off: no preallocation
|
|
# @metadata: preallocate only for metadata
|
|
# @falloc: like @full preallocation but allocate disk space by
|
|
# posix_fallocate() rather than writing zeros.
|
|
# @full: preallocate all data by writing zeros to device to ensure disk
|
|
# space is really available. @full preallocation also sets up
|
|
# metadata correctly.
|
|
#
|
|
# Since 2.2
|
|
##
|
|
{ 'enum': 'PreallocMode',
|
|
'data': [ 'off', 'metadata', 'falloc', 'full' ] }
|
|
|
|
##
|
|
# @BLOCK_WRITE_THRESHOLD
|
|
#
|
|
# Emitted when writes on block device reaches or exceeds the
|
|
# configured write threshold. For thin-provisioned devices, this
|
|
# means the device should be extended to avoid pausing for
|
|
# disk exhaustion.
|
|
# The event is one shot. Once triggered, it needs to be
|
|
# re-registered with another block-set-threshold command.
|
|
#
|
|
# @node-name: graph node name on which the threshold was exceeded.
|
|
#
|
|
# @amount-exceeded: amount of data which exceeded the threshold, in bytes.
|
|
#
|
|
# @write-threshold: last configured threshold, in bytes.
|
|
#
|
|
# Since: 2.3
|
|
##
|
|
{ 'event': 'BLOCK_WRITE_THRESHOLD',
|
|
'data': { 'node-name': 'str',
|
|
'amount-exceeded': 'uint64',
|
|
'write-threshold': 'uint64' } }
|
|
|
|
##
|
|
# @block-set-write-threshold
|
|
#
|
|
# Change the write threshold for a block drive. An event will be delivered
|
|
# if a write to this block drive crosses the configured threshold.
|
|
# This is useful to transparently resize thin-provisioned drives without
|
|
# the guest OS noticing.
|
|
#
|
|
# @node-name: graph node name on which the threshold must be set.
|
|
#
|
|
# @write-threshold: configured threshold for the block device, bytes.
|
|
# Use 0 to disable the threshold.
|
|
#
|
|
# Since: 2.3
|
|
##
|
|
{ 'command': 'block-set-write-threshold',
|
|
'data': { 'node-name': 'str', 'write-threshold': 'uint64' } }
|