OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
d818bfc5c3
qemu-e2k/Makefile
David Gibson a9f8ad8f2a Add SLOF-based partition firmware for pSeries machine, allowing more boot options 
Currently, the emulated pSeries machine requires the use of the
-kernel parameter in order to explicitly load a guest kernel.  This
means booting from the virtual disk, cdrom or network is not possible.

This patch addresses this limitation by inserting a within-partition
firmware image (derived from the "SLOF" free Open Firmware project).
If -kernel is not specified, qemu will now load the SLOF image, which
has access to the qemu boot device list through the device tree, and
can boot from any of the usual virtual devices.

In order to support the new firmware, an extension to the emulated
machine/hypervisor is necessary.  Unlike Linux, which expects
multi-CPU entry to be handled kexec() style, the SLOF firmware expects
only one CPU to be active at entry, and to use a hypervisor RTAS
method to enable the other CPUs one by one.

This patch also implements this 'start-cpu' method, so that SLOF can
start the secondary CPUs and marshal them into the kexec() holding
pattern ready for entry into the guest OS.  Linux should, and in the
future might directly use the start-cpu method to enable initially
disabled CPUs, but for now it does require kexec() entry.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2011-04-01 18:34:57 +02:00

371 lines
13 KiB
Makefile
Raw Blame History

# Makefile for QEMU.
GENERATED_HEADERS = config-host.h trace.h qemu-options.def
ifeq ($(TRACE_BACKEND),dtrace)
GENERATED_HEADERS += trace-dtrace.h
endif
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all: build-all
include config-host.mak
include $(SRC_PATH)/rules.mak
config-host.mak: $(SRC_PATH)/configure
@echo $@ is out-of-date, running configure
@sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh
else
config-host.mak:
@echo "Please call configure before running make!"
@exit 1
endif
# Don't try to regenerate Makefile or configure
# We don't generate any of them
Makefile: ;
configure: ;
.PHONY: all clean cscope distclean dvi html info install install-doc \
pdf recurse-all speed tar tarbin test build-all
$(call set-vpath, $(SRC_PATH):$(SRC_PATH)/hw)
LIBS+=-lz $(LIBS_TOOLS)
ifdef BUILD_DOCS
DOCS=qemu-doc.html qemu-tech.html qemu.1 qemu-img.1 qemu-nbd.8 QMP/qmp-commands.txt
else
DOCS=
endif
SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory)
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %/config-devices.mak.d, $(TARGET_DIRS))
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
$(call quiet-command,cat $(SUBDIR_DEVICES_MAK) | grep =y | sort -u > $@," GEN $@")
-include $(SUBDIR_DEVICES_MAK_DEP)
%/config-devices.mak: default-configs/%.mak
$(call quiet-command,$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $@ $<, " GEN $@")
@if test -f $@; then \
if cmp -s $@.old $@; then \
mv $@.tmp $@; \
cp -p $@ $@.old; \
else \
if test -f $@.old; then \
echo "WARNING: $@ (user modified) out of date.";\
else \
echo "WARNING: $@ out of date.";\
fi; \
echo "Run \"make defconfig\" to regenerate."; \
rm $@.tmp; \
fi; \
else \
mv $@.tmp $@; \
cp -p $@ $@.old; \
fi
defconfig:
rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
-include config-all-devices.mak
build-all: $(DOCS) $(TOOLS) recurse-all
config-host.h: config-host.h-timestamp
config-host.h-timestamp: config-host.mak
qemu-options.def: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@")
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
subdir-%: $(GENERATED_HEADERS)
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
ifneq ($(wildcard config-host.mak),)
include $(SRC_PATH)/Makefile.objs
endif
$(common-obj-y): $(GENERATED_HEADERS)
$(filter %-softmmu,$(SUBDIR_RULES)): $(trace-obj-y) $(common-obj-y) subdir-libdis
$(filter %-user,$(SUBDIR_RULES)): $(GENERATED_HEADERS) $(trace-obj-y) subdir-libdis-user subdir-libuser
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
romsubdir-%:
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/",)
ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
audio/audio.o audio/fmodaudio.o: QEMU_CFLAGS += $(FMOD_CFLAGS)
QEMU_CFLAGS+=$(CURL_CFLAGS)
ui/cocoa.o: ui/cocoa.m
ui/sdl.o audio/sdlaudio.o ui/sdl_zoom.o baum.o: QEMU_CFLAGS += $(SDL_CFLAGS)
ui/vnc.o: QEMU_CFLAGS += $(VNC_TLS_CFLAGS)
bt-host.o: QEMU_CFLAGS += $(BLUEZ_CFLAGS)
ifeq ($(TRACE_BACKEND),dtrace)
trace.h: trace.h-timestamp trace-dtrace.h
else
trace.h: trace.h-timestamp
endif
trace.h-timestamp: $(SRC_PATH)/trace-events config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -h < $< > $@," GEN trace.h")
@cmp -s $@ trace.h || cp $@ trace.h
trace.c: trace.c-timestamp
trace.c-timestamp: $(SRC_PATH)/trace-events config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -c < $< > $@," GEN trace.c")
@cmp -s $@ trace.c || cp $@ trace.c
trace.o: trace.c $(GENERATED_HEADERS)
trace-dtrace.h: trace-dtrace.dtrace
$(call quiet-command,dtrace -o $@ -h -s $<, " GEN trace-dtrace.h")
# Normal practice is to name DTrace probe file with a '.d' extension
# but that gets picked up by QEMU's Makefile as an external dependancy
# rule file. So we use '.dtrace' instead
trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events config-host.mak
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -d < $< > $@," GEN trace-dtrace.dtrace")
@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
$(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o")
simpletrace.o: simpletrace.c $(GENERATED_HEADERS)
version.o: $(SRC_PATH)/version.rc config-host.mak
$(call quiet-command,$(WINDRES) -I. -o $@ $<," RC $(TARGET_DIR)$@")
version-obj-$(CONFIG_WIN32) += version.o
######################################################################
qemu-img.o: qemu-img-cmds.h
qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o cmd.o: $(GENERATED_HEADERS)
qemu-img$(EXESUF): qemu-img.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-nbd$(EXESUF): qemu-nbd.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-io$(EXESUF): qemu-io.o cmd.o qemu-tool.o qemu-error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y) $(version-obj-y) qemu-timer-common.o
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@," GEN $@")
check-qint.o check-qstring.o check-qdict.o check-qlist.o check-qfloat.o check-qjson.o: $(GENERATED_HEADERS)
CHECK_PROG_DEPS = qemu-malloc.o $(oslib-obj-y) $(trace-obj-y)
check-qint: check-qint.o qint.o $(CHECK_PROG_DEPS)
check-qstring: check-qstring.o qstring.o $(CHECK_PROG_DEPS)
check-qdict: check-qdict.o qdict.o qfloat.o qint.o qstring.o qbool.o qlist.o $(CHECK_PROG_DEPS)
check-qlist: check-qlist.o qlist.o qint.o $(CHECK_PROG_DEPS)
check-qfloat: check-qfloat.o qfloat.o $(CHECK_PROG_DEPS)
check-qjson: check-qjson.o qfloat.o qint.o qdict.o qstring.o qlist.o qbool.o qjson.o json-streamer.o json-lexer.o json-parser.o $(CHECK_PROG_DEPS)
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
rm -f qemu-options.def
rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d
rm -f qemu-img-cmds.h
rm -f trace.c trace.h trace.c-timestamp trace.h-timestamp
rm -f trace-dtrace.dtrace trace-dtrace.dtrace-timestamp
rm -f trace-dtrace.h trace-dtrace.h-timestamp
$(MAKE) -C tests clean
for d in $(ALL_SUBDIRS) libhw32 libhw64 libuser libdis libdis-user; do \
if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
rm -f $$d/qemu-options.def; \
done
distclean: clean
rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi
rm -f config-all-devices.mak
rm -f roms/seabios/config.mak roms/vgabios/config.mak
rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.dvi qemu-doc.fn qemu-doc.info qemu-doc.ky qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp qemu-doc.vr
rm -f qemu-tech.info qemu-tech.aux qemu-tech.cp qemu-tech.dvi qemu-tech.fn qemu-tech.info qemu-tech.ky qemu-tech.log qemu-tech.pdf qemu-tech.pg qemu-tech.toc qemu-tech.tp qemu-tech.vr
for d in $(TARGET_DIRS) libhw32 libhw64 libuser libdis libdis-user; do \
rm -rf $$d || exit 1 ; \
done
KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
ar de en-us fi fr-be hr it lv nl pl ru th \
common de-ch es fo fr-ca hu ja mk nl-be pt sl tr
ifdef INSTALL_BLOBS
BLOBS=bios.bin vgabios.bin vgabios-cirrus.bin \
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin \
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc \
gpxe-eepro100-80861209.rom \
pxe-e1000.bin \
pxe-ne2k_pci.bin pxe-pcnet.bin \
pxe-rtl8139.bin pxe-virtio.bin \
bamboo.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
multiboot.bin linuxboot.bin \
s390-zipl.rom \
spapr-rtas.bin slof.bin
else
BLOBS=
endif
install-doc: $(DOCS)
$(INSTALL_DIR) "$(DESTDIR)$(docdir)"
$(INSTALL_DATA) qemu-doc.html qemu-tech.html "$(DESTDIR)$(docdir)"
ifdef CONFIG_POSIX
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DATA) qemu.1 qemu-img.1 "$(DESTDIR)$(mandir)/man1"
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
endif
install-sysconfig:
$(INSTALL_DIR) "$(DESTDIR)$(sysconfdir)/qemu"
$(INSTALL_DATA) $(SRC_PATH)/sysconfigs/target/target-x86_64.conf "$(DESTDIR)$(sysconfdir)/qemu"
install: all $(if $(BUILD_DOCS),install-doc) install-sysconfig
$(INSTALL_DIR) "$(DESTDIR)$(bindir)"
ifneq ($(TOOLS),)
$(INSTALL_PROG) $(STRIP_OPT) $(TOOLS) "$(DESTDIR)$(bindir)"
endif
ifneq ($(BLOBS),)
$(INSTALL_DIR) "$(DESTDIR)$(datadir)"
set -e; for x in $(BLOBS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(datadir)"; \
done
endif
$(INSTALL_DIR) "$(DESTDIR)$(datadir)/keymaps"
set -e; for x in $(KEYMAPS); do \
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(datadir)/keymaps"; \
done
for d in $(TARGET_DIRS); do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
# various test targets
test speed: all
$(MAKE) -C tests $@
.PHONY: TAGS
TAGS:
find "$(SRC_PATH)" -name '*.[hc]' -print0 | xargs -0 etags
cscope:
rm -f ./cscope.*
find . -name "*.[ch]" -print | sed 's,^\./,,' > ./cscope.files
cscope -b
# documentation
MAKEINFO=makeinfo
MAKEINFOFLAGS=--no-headers --no-split --number-sections
TEXIFLAG=$(if $(V),,--quiet)
%.dvi: %.texi
$(call quiet-command,texi2dvi $(TEXIFLAG) -I . $<," GEN $@")
%.html: %.texi
$(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) --html $< -o $@, \
" GEN $@")
%.info: %.texi
$(call quiet-command,$(MAKEINFO) $< -o $@," GEN $@")
%.pdf: %.texi
$(call quiet-command,texi2pdf $(TEXIFLAG) -I . $<," GEN $@")
qemu-options.texi: $(SRC_PATH)/qemu-options.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
QMP/qmp-commands.txt: $(SRC_PATH)/qmp-commands.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -q < $< > $@," GEN $@")
qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@," GEN $@")
qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu.pod && \
pod2man --section=1 --center=" " --release=" " qemu.pod > $@, \
" GEN $@")
qemu-img.1: qemu-img.texi qemu-img-cmds.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-img.pod && \
pod2man --section=1 --center=" " --release=" " qemu-img.pod > $@, \
" GEN $@")
qemu-nbd.8: qemu-nbd.texi
$(call quiet-command, \
perl -Ww -- $(SRC_PATH)/scripts/texi2pod.pl $< qemu-nbd.pod && \
pod2man --section=8 --center=" " --release=" " qemu-nbd.pod > $@, \
" GEN $@")
dvi: qemu-doc.dvi qemu-tech.dvi
html: qemu-doc.html qemu-tech.html
info: qemu-doc.info qemu-tech.info
pdf: qemu-doc.pdf qemu-tech.pdf
qemu-doc.dvi qemu-doc.html qemu-doc.info qemu-doc.pdf: \
qemu-img.texi qemu-nbd.texi qemu-options.texi \
qemu-monitor.texi qemu-img-cmds.texi
VERSION ?= $(shell cat VERSION)
FILE = qemu-$(VERSION)
# tar release (use 'make -k tar' on a checkouted tree)
tar:
rm -rf /tmp/$(FILE)
cp -r . /tmp/$(FILE)
cd /tmp && tar zcvf ~/$(FILE).tar.gz $(FILE) --exclude CVS --exclude .git --exclude .svn
rm -rf /tmp/$(FILE)
SYSTEM_TARGETS=$(filter %-softmmu,$(TARGET_DIRS))
SYSTEM_PROGS=$(patsubst qemu-system-i386,qemu, \
$(patsubst %-softmmu,qemu-system-%, \
$(SYSTEM_TARGETS)))
USER_TARGETS=$(filter %-user,$(TARGET_DIRS))
USER_PROGS=$(patsubst %-bsd-user,qemu-%, \
$(patsubst %-darwin-user,qemu-%, \
$(patsubst %-linux-user,qemu-%, \
$(USER_TARGETS))))
# generate a binary distribution
tarbin:
cd / && tar zcvf ~/qemu-$(VERSION)-$(ARCH).tar.gz \
$(patsubst %,$(bindir)/%, $(SYSTEM_PROGS)) \
$(patsubst %,$(bindir)/%, $(USER_PROGS)) \
$(bindir)/qemu-img \
$(bindir)/qemu-nbd \
$(datadir)/bios.bin \
$(datadir)/vgabios.bin \
$(datadir)/vgabios-cirrus.bin \
$(datadir)/ppc_rom.bin \
$(datadir)/openbios-sparc32 \
$(datadir)/openbios-sparc64 \
$(datadir)/openbios-ppc \
$(datadir)/pxe-ne2k_pci.bin \
$(datadir)/pxe-rtl8139.bin \
$(datadir)/pxe-pcnet.bin \
$(datadir)/pxe-e1000.bin \
$(docdir)/qemu-doc.html \
$(docdir)/qemu-tech.html \
$(mandir)/man1/qemu.1 \
$(mandir)/man1/qemu-img.1 \
$(mandir)/man8/qemu-nbd.8
# Include automatically generated dependency files
-include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d ui/*.d)
Reference in New Issue View Git Blame Copy Permalink