549 lines
17 KiB
C
549 lines
17 KiB
C
/*
|
|
* ARM Versatile/PB PCI host controller
|
|
*
|
|
* Copyright (c) 2006-2009 CodeSourcery.
|
|
* Written by Paul Brook
|
|
*
|
|
* This code is licensed under the LGPL.
|
|
*/
|
|
|
|
#include "hw/sysbus.h"
|
|
#include "hw/pci/pci.h"
|
|
#include "hw/pci/pci_bus.h"
|
|
#include "hw/pci/pci_host.h"
|
|
#include "exec/address-spaces.h"
|
|
|
|
/* Old and buggy versions of QEMU used the wrong mapping from
|
|
* PCI IRQs to system interrupt lines. Unfortunately the Linux
|
|
* kernel also had the corresponding bug in setting up interrupts
|
|
* (so older kernels work on QEMU and not on real hardware).
|
|
* We automatically detect these broken kernels and flip back
|
|
* to the broken irq mapping by spotting guest writes to the
|
|
* PCI_INTERRUPT_LINE register to see where the guest thinks
|
|
* interrupts are going to be routed. So we start in state
|
|
* ASSUME_OK on reset, and transition to either BROKEN or
|
|
* FORCE_OK at the first write to an INTERRUPT_LINE register for
|
|
* a slot where broken and correct interrupt mapping would differ.
|
|
* Once in either BROKEN or FORCE_OK we never transition again;
|
|
* this allows a newer kernel to use the INTERRUPT_LINE
|
|
* registers arbitrarily once it has indicated that it isn't
|
|
* broken in its init code somewhere.
|
|
*
|
|
* Unfortunately we have to cope with multiple different
|
|
* variants on the broken kernel behaviour:
|
|
* phase I (before kernel commit 1bc39ac5d) kernels assume old
|
|
* QEMU behaviour, so they use IRQ 27 for all slots
|
|
* phase II (1bc39ac5d and later, but before e3e92a7be6) kernels
|
|
* swizzle IRQs between slots, but do it wrongly, so they
|
|
* work only for every fourth PCI card, and only if (like old
|
|
* QEMU) the PCI host device is at slot 0 rather than where
|
|
* the h/w actually puts it
|
|
* phase III (e3e92a7be6 and later) kernels still swizzle IRQs between
|
|
* slots wrongly, but add a fixed offset of 64 to everything
|
|
* they write to PCI_INTERRUPT_LINE.
|
|
*
|
|
* We live in hope of a mythical phase IV kernel which might
|
|
* actually behave in ways that work on the hardware. Such a
|
|
* kernel should probably start off by writing some value neither
|
|
* 27 nor 91 to slot zero's PCI_INTERRUPT_LINE register to
|
|
* disable the autodetection. After that it can do what it likes.
|
|
*
|
|
* Slot % 4 | hw | I | II | III
|
|
* -------------------------------
|
|
* 0 | 29 | 27 | 27 | 91
|
|
* 1 | 30 | 27 | 28 | 92
|
|
* 2 | 27 | 27 | 29 | 93
|
|
* 3 | 28 | 27 | 30 | 94
|
|
*
|
|
* Since our autodetection is not perfect we also provide a
|
|
* property so the user can make us start in BROKEN or FORCE_OK
|
|
* on reset if they know they have a bad or good kernel.
|
|
*/
|
|
enum {
|
|
PCI_VPB_IRQMAP_ASSUME_OK,
|
|
PCI_VPB_IRQMAP_BROKEN,
|
|
PCI_VPB_IRQMAP_FORCE_OK,
|
|
};
|
|
|
|
typedef struct {
|
|
PCIHostState parent_obj;
|
|
|
|
qemu_irq irq[4];
|
|
MemoryRegion controlregs;
|
|
MemoryRegion mem_config;
|
|
MemoryRegion mem_config2;
|
|
/* Containers representing the PCI address spaces */
|
|
MemoryRegion pci_io_space;
|
|
MemoryRegion pci_mem_space;
|
|
/* Alias regions into PCI address spaces which we expose as sysbus regions.
|
|
* The offsets into pci_mem_space are controlled by the imap registers.
|
|
*/
|
|
MemoryRegion pci_io_window;
|
|
MemoryRegion pci_mem_window[3];
|
|
PCIBus pci_bus;
|
|
PCIDevice pci_dev;
|
|
|
|
/* Constant for life of device: */
|
|
int realview;
|
|
uint32_t mem_win_size[3];
|
|
uint8_t irq_mapping_prop;
|
|
|
|
/* Variable state: */
|
|
uint32_t imap[3];
|
|
uint32_t smap[3];
|
|
uint32_t selfid;
|
|
uint32_t flags;
|
|
uint8_t irq_mapping;
|
|
} PCIVPBState;
|
|
|
|
static void pci_vpb_update_window(PCIVPBState *s, int i)
|
|
{
|
|
/* Adjust the offset of the alias region we use for
|
|
* the memory window i to account for a change in the
|
|
* value of the corresponding IMAP register.
|
|
* Note that the semantics of the IMAP register differ
|
|
* for realview and versatile variants of the controller.
|
|
*/
|
|
hwaddr offset;
|
|
if (s->realview) {
|
|
/* Top bits of register (masked according to window size) provide
|
|
* top bits of PCI address.
|
|
*/
|
|
offset = s->imap[i] & ~(s->mem_win_size[i] - 1);
|
|
} else {
|
|
/* Bottom 4 bits of register provide top 4 bits of PCI address */
|
|
offset = s->imap[i] << 28;
|
|
}
|
|
memory_region_set_alias_offset(&s->pci_mem_window[i], offset);
|
|
}
|
|
|
|
static void pci_vpb_update_all_windows(PCIVPBState *s)
|
|
{
|
|
/* Update all alias windows based on the current register state */
|
|
int i;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
pci_vpb_update_window(s, i);
|
|
}
|
|
}
|
|
|
|
static int pci_vpb_post_load(void *opaque, int version_id)
|
|
{
|
|
PCIVPBState *s = opaque;
|
|
pci_vpb_update_all_windows(s);
|
|
return 0;
|
|
}
|
|
|
|
static const VMStateDescription pci_vpb_vmstate = {
|
|
.name = "versatile-pci",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.post_load = pci_vpb_post_load,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32_ARRAY(imap, PCIVPBState, 3),
|
|
VMSTATE_UINT32_ARRAY(smap, PCIVPBState, 3),
|
|
VMSTATE_UINT32(selfid, PCIVPBState),
|
|
VMSTATE_UINT32(flags, PCIVPBState),
|
|
VMSTATE_UINT8(irq_mapping, PCIVPBState),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
#define TYPE_VERSATILE_PCI "versatile_pci"
|
|
#define PCI_VPB(obj) \
|
|
OBJECT_CHECK(PCIVPBState, (obj), TYPE_VERSATILE_PCI)
|
|
|
|
#define TYPE_VERSATILE_PCI_HOST "versatile_pci_host"
|
|
#define PCI_VPB_HOST(obj) \
|
|
OBJECT_CHECK(PCIDevice, (obj), TYPE_VERSATILE_PCIHOST)
|
|
|
|
typedef enum {
|
|
PCI_IMAP0 = 0x0,
|
|
PCI_IMAP1 = 0x4,
|
|
PCI_IMAP2 = 0x8,
|
|
PCI_SELFID = 0xc,
|
|
PCI_FLAGS = 0x10,
|
|
PCI_SMAP0 = 0x14,
|
|
PCI_SMAP1 = 0x18,
|
|
PCI_SMAP2 = 0x1c,
|
|
} PCIVPBControlRegs;
|
|
|
|
static void pci_vpb_reg_write(void *opaque, hwaddr addr,
|
|
uint64_t val, unsigned size)
|
|
{
|
|
PCIVPBState *s = opaque;
|
|
|
|
switch (addr) {
|
|
case PCI_IMAP0:
|
|
case PCI_IMAP1:
|
|
case PCI_IMAP2:
|
|
{
|
|
int win = (addr - PCI_IMAP0) >> 2;
|
|
s->imap[win] = val;
|
|
pci_vpb_update_window(s, win);
|
|
break;
|
|
}
|
|
case PCI_SELFID:
|
|
s->selfid = val;
|
|
break;
|
|
case PCI_FLAGS:
|
|
s->flags = val;
|
|
break;
|
|
case PCI_SMAP0:
|
|
case PCI_SMAP1:
|
|
case PCI_SMAP2:
|
|
{
|
|
int win = (addr - PCI_SMAP0) >> 2;
|
|
s->smap[win] = val;
|
|
break;
|
|
}
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"pci_vpb_reg_write: Bad offset %x\n", (int)addr);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static uint64_t pci_vpb_reg_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
PCIVPBState *s = opaque;
|
|
|
|
switch (addr) {
|
|
case PCI_IMAP0:
|
|
case PCI_IMAP1:
|
|
case PCI_IMAP2:
|
|
{
|
|
int win = (addr - PCI_IMAP0) >> 2;
|
|
return s->imap[win];
|
|
}
|
|
case PCI_SELFID:
|
|
return s->selfid;
|
|
case PCI_FLAGS:
|
|
return s->flags;
|
|
case PCI_SMAP0:
|
|
case PCI_SMAP1:
|
|
case PCI_SMAP2:
|
|
{
|
|
int win = (addr - PCI_SMAP0) >> 2;
|
|
return s->smap[win];
|
|
}
|
|
default:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"pci_vpb_reg_read: Bad offset %x\n", (int)addr);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionOps pci_vpb_reg_ops = {
|
|
.read = pci_vpb_reg_read,
|
|
.write = pci_vpb_reg_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.valid = {
|
|
.min_access_size = 4,
|
|
.max_access_size = 4,
|
|
},
|
|
};
|
|
|
|
static int pci_vpb_broken_irq(int slot, int irq)
|
|
{
|
|
/* Determine whether this IRQ value for this slot represents a
|
|
* known broken Linux kernel behaviour for this slot.
|
|
* Return one of the PCI_VPB_IRQMAP_ constants:
|
|
* BROKEN : if this definitely looks like a broken kernel
|
|
* FORCE_OK : if this definitely looks good
|
|
* ASSUME_OK : if we can't tell
|
|
*/
|
|
slot %= PCI_NUM_PINS;
|
|
|
|
if (irq == 27) {
|
|
if (slot == 2) {
|
|
/* Might be a Phase I kernel, or might be a fixed kernel,
|
|
* since slot 2 is where we expect this IRQ.
|
|
*/
|
|
return PCI_VPB_IRQMAP_ASSUME_OK;
|
|
}
|
|
/* Phase I kernel */
|
|
return PCI_VPB_IRQMAP_BROKEN;
|
|
}
|
|
if (irq == slot + 27) {
|
|
/* Phase II kernel */
|
|
return PCI_VPB_IRQMAP_BROKEN;
|
|
}
|
|
if (irq == slot + 27 + 64) {
|
|
/* Phase III kernel */
|
|
return PCI_VPB_IRQMAP_BROKEN;
|
|
}
|
|
/* Anything else must be a fixed kernel, possibly using an
|
|
* arbitrary irq map.
|
|
*/
|
|
return PCI_VPB_IRQMAP_FORCE_OK;
|
|
}
|
|
|
|
static void pci_vpb_config_write(void *opaque, hwaddr addr,
|
|
uint64_t val, unsigned size)
|
|
{
|
|
PCIVPBState *s = opaque;
|
|
if (!s->realview && (addr & 0xff) == PCI_INTERRUPT_LINE
|
|
&& s->irq_mapping == PCI_VPB_IRQMAP_ASSUME_OK) {
|
|
uint8_t devfn = addr >> 8;
|
|
s->irq_mapping = pci_vpb_broken_irq(PCI_SLOT(devfn), val);
|
|
}
|
|
pci_data_write(&s->pci_bus, addr, val, size);
|
|
}
|
|
|
|
static uint64_t pci_vpb_config_read(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
PCIVPBState *s = opaque;
|
|
uint32_t val;
|
|
val = pci_data_read(&s->pci_bus, addr, size);
|
|
return val;
|
|
}
|
|
|
|
static const MemoryRegionOps pci_vpb_config_ops = {
|
|
.read = pci_vpb_config_read,
|
|
.write = pci_vpb_config_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static int pci_vpb_map_irq(PCIDevice *d, int irq_num)
|
|
{
|
|
PCIVPBState *s = container_of(d->bus, PCIVPBState, pci_bus);
|
|
|
|
if (s->irq_mapping == PCI_VPB_IRQMAP_BROKEN) {
|
|
/* Legacy broken IRQ mapping for compatibility with old and
|
|
* buggy Linux guests
|
|
*/
|
|
return irq_num;
|
|
}
|
|
|
|
/* Slot to IRQ mapping for RealView Platform Baseboard 926 backplane
|
|
* name slot IntA IntB IntC IntD
|
|
* A 31 IRQ28 IRQ29 IRQ30 IRQ27
|
|
* B 30 IRQ27 IRQ28 IRQ29 IRQ30
|
|
* C 29 IRQ30 IRQ27 IRQ28 IRQ29
|
|
* Slot C is for the host bridge; A and B the peripherals.
|
|
* Our output irqs 0..3 correspond to the baseboard's 27..30.
|
|
*
|
|
* This mapping function takes account of an oddity in the PB926
|
|
* board wiring, where the FPGA's P_nINTA input is connected to
|
|
* the INTB connection on the board PCI edge connector, P_nINTB
|
|
* is connected to INTC, and so on, so everything is one number
|
|
* further round from where you might expect.
|
|
*/
|
|
return pci_swizzle_map_irq_fn(d, irq_num + 2);
|
|
}
|
|
|
|
static int pci_vpb_rv_map_irq(PCIDevice *d, int irq_num)
|
|
{
|
|
/* Slot to IRQ mapping for RealView EB and PB1176 backplane
|
|
* name slot IntA IntB IntC IntD
|
|
* A 31 IRQ50 IRQ51 IRQ48 IRQ49
|
|
* B 30 IRQ49 IRQ50 IRQ51 IRQ48
|
|
* C 29 IRQ48 IRQ49 IRQ50 IRQ51
|
|
* Slot C is for the host bridge; A and B the peripherals.
|
|
* Our output irqs 0..3 correspond to the baseboard's 48..51.
|
|
*
|
|
* The PB1176 and EB boards don't have the PB926 wiring oddity
|
|
* described above; P_nINTA connects to INTA, P_nINTB to INTB
|
|
* and so on, which is why this mapping function is different.
|
|
*/
|
|
return pci_swizzle_map_irq_fn(d, irq_num + 3);
|
|
}
|
|
|
|
static void pci_vpb_set_irq(void *opaque, int irq_num, int level)
|
|
{
|
|
qemu_irq *pic = opaque;
|
|
|
|
qemu_set_irq(pic[irq_num], level);
|
|
}
|
|
|
|
static void pci_vpb_reset(DeviceState *d)
|
|
{
|
|
PCIVPBState *s = PCI_VPB(d);
|
|
|
|
s->imap[0] = 0;
|
|
s->imap[1] = 0;
|
|
s->imap[2] = 0;
|
|
s->smap[0] = 0;
|
|
s->smap[1] = 0;
|
|
s->smap[2] = 0;
|
|
s->selfid = 0;
|
|
s->flags = 0;
|
|
s->irq_mapping = s->irq_mapping_prop;
|
|
|
|
pci_vpb_update_all_windows(s);
|
|
}
|
|
|
|
static void pci_vpb_init(Object *obj)
|
|
{
|
|
PCIHostState *h = PCI_HOST_BRIDGE(obj);
|
|
PCIVPBState *s = PCI_VPB(obj);
|
|
|
|
memory_region_init(&s->pci_io_space, OBJECT(s), "pci_io", 1ULL << 32);
|
|
memory_region_init(&s->pci_mem_space, OBJECT(s), "pci_mem", 1ULL << 32);
|
|
|
|
pci_bus_new_inplace(&s->pci_bus, sizeof(s->pci_bus), DEVICE(obj), "pci",
|
|
&s->pci_mem_space, &s->pci_io_space,
|
|
PCI_DEVFN(11, 0), TYPE_PCI_BUS);
|
|
h->bus = &s->pci_bus;
|
|
|
|
object_initialize(&s->pci_dev, sizeof(s->pci_dev), TYPE_VERSATILE_PCI_HOST);
|
|
qdev_set_parent_bus(DEVICE(&s->pci_dev), BUS(&s->pci_bus));
|
|
|
|
/* Window sizes for VersatilePB; realview_pci's init will override */
|
|
s->mem_win_size[0] = 0x0c000000;
|
|
s->mem_win_size[1] = 0x10000000;
|
|
s->mem_win_size[2] = 0x10000000;
|
|
}
|
|
|
|
static void pci_vpb_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
PCIVPBState *s = PCI_VPB(dev);
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
pci_map_irq_fn mapfn;
|
|
int i;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
sysbus_init_irq(sbd, &s->irq[i]);
|
|
}
|
|
|
|
if (s->realview) {
|
|
mapfn = pci_vpb_rv_map_irq;
|
|
} else {
|
|
mapfn = pci_vpb_map_irq;
|
|
}
|
|
|
|
pci_bus_irqs(&s->pci_bus, pci_vpb_set_irq, mapfn, s->irq, 4);
|
|
|
|
/* Our memory regions are:
|
|
* 0 : our control registers
|
|
* 1 : PCI self config window
|
|
* 2 : PCI config window
|
|
* 3 : PCI IO window
|
|
* 4..6 : PCI memory windows
|
|
*/
|
|
memory_region_init_io(&s->controlregs, OBJECT(s), &pci_vpb_reg_ops, s,
|
|
"pci-vpb-regs", 0x1000);
|
|
sysbus_init_mmio(sbd, &s->controlregs);
|
|
memory_region_init_io(&s->mem_config, OBJECT(s), &pci_vpb_config_ops, s,
|
|
"pci-vpb-selfconfig", 0x1000000);
|
|
sysbus_init_mmio(sbd, &s->mem_config);
|
|
memory_region_init_io(&s->mem_config2, OBJECT(s), &pci_vpb_config_ops, s,
|
|
"pci-vpb-config", 0x1000000);
|
|
sysbus_init_mmio(sbd, &s->mem_config2);
|
|
|
|
/* The window into I/O space is always into a fixed base address;
|
|
* its size is the same for both realview and versatile.
|
|
*/
|
|
memory_region_init_alias(&s->pci_io_window, OBJECT(s), "pci-vbp-io-window",
|
|
&s->pci_io_space, 0, 0x100000);
|
|
|
|
sysbus_init_mmio(sbd, &s->pci_io_space);
|
|
|
|
/* Create the alias regions corresponding to our three windows onto
|
|
* PCI memory space. The sizes vary from board to board; the base
|
|
* offsets are guest controllable via the IMAP registers.
|
|
*/
|
|
for (i = 0; i < 3; i++) {
|
|
memory_region_init_alias(&s->pci_mem_window[i], OBJECT(s), "pci-vbp-window",
|
|
&s->pci_mem_space, 0, s->mem_win_size[i]);
|
|
sysbus_init_mmio(sbd, &s->pci_mem_window[i]);
|
|
}
|
|
|
|
/* TODO Remove once realize propagates to child devices. */
|
|
object_property_set_bool(OBJECT(&s->pci_dev), true, "realized", errp);
|
|
}
|
|
|
|
static void versatile_pci_host_realize(PCIDevice *d, Error **errp)
|
|
{
|
|
pci_set_word(d->config + PCI_STATUS,
|
|
PCI_STATUS_66MHZ | PCI_STATUS_DEVSEL_MEDIUM);
|
|
pci_set_byte(d->config + PCI_LATENCY_TIMER, 0x10);
|
|
}
|
|
|
|
static void versatile_pci_host_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
k->realize = versatile_pci_host_realize;
|
|
k->vendor_id = PCI_VENDOR_ID_XILINX;
|
|
k->device_id = PCI_DEVICE_ID_XILINX_XC2VP30;
|
|
k->class_id = PCI_CLASS_PROCESSOR_CO;
|
|
/*
|
|
* PCI-facing part of the host bridge, not usable without the
|
|
* host-facing part, which can't be device_add'ed, yet.
|
|
*/
|
|
dc->cannot_instantiate_with_device_add_yet = true;
|
|
}
|
|
|
|
static const TypeInfo versatile_pci_host_info = {
|
|
.name = TYPE_VERSATILE_PCI_HOST,
|
|
.parent = TYPE_PCI_DEVICE,
|
|
.instance_size = sizeof(PCIDevice),
|
|
.class_init = versatile_pci_host_class_init,
|
|
};
|
|
|
|
static Property pci_vpb_properties[] = {
|
|
DEFINE_PROP_UINT8("broken-irq-mapping", PCIVPBState, irq_mapping_prop,
|
|
PCI_VPB_IRQMAP_ASSUME_OK),
|
|
DEFINE_PROP_END_OF_LIST()
|
|
};
|
|
|
|
static void pci_vpb_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
dc->realize = pci_vpb_realize;
|
|
dc->reset = pci_vpb_reset;
|
|
dc->vmsd = &pci_vpb_vmstate;
|
|
dc->props = pci_vpb_properties;
|
|
/* Reason: object_unref() hangs */
|
|
dc->cannot_destroy_with_object_finalize_yet = true;
|
|
}
|
|
|
|
static const TypeInfo pci_vpb_info = {
|
|
.name = TYPE_VERSATILE_PCI,
|
|
.parent = TYPE_PCI_HOST_BRIDGE,
|
|
.instance_size = sizeof(PCIVPBState),
|
|
.instance_init = pci_vpb_init,
|
|
.class_init = pci_vpb_class_init,
|
|
};
|
|
|
|
static void pci_realview_init(Object *obj)
|
|
{
|
|
PCIVPBState *s = PCI_VPB(obj);
|
|
|
|
s->realview = 1;
|
|
/* The PCI window sizes are different on Realview boards */
|
|
s->mem_win_size[0] = 0x01000000;
|
|
s->mem_win_size[1] = 0x04000000;
|
|
s->mem_win_size[2] = 0x08000000;
|
|
}
|
|
|
|
static void pci_realview_class_init(ObjectClass *class, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(class);
|
|
|
|
/* Reason: object_unref() hangs */
|
|
dc->cannot_destroy_with_object_finalize_yet = true;
|
|
}
|
|
|
|
static const TypeInfo pci_realview_info = {
|
|
.name = "realview_pci",
|
|
.parent = TYPE_VERSATILE_PCI,
|
|
.instance_init = pci_realview_init,
|
|
.class_init = pci_realview_class_init,
|
|
};
|
|
|
|
static void versatile_pci_register_types(void)
|
|
{
|
|
type_register_static(&pci_vpb_info);
|
|
type_register_static(&pci_realview_info);
|
|
type_register_static(&versatile_pci_host_info);
|
|
}
|
|
|
|
type_init(versatile_pci_register_types)
|