OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
dcdf98a901
qemu-e2k/hw/intc/arm_gicv3_cpuif.c
Peter Maydell c20a135a7a hw/intc/arm_gicv3_cpuif: Make GIC maintenance interrupts work 
In gicv3_init_cpuif() we copy the ARMCPU gicv3_maintenance_interrupt
into the GICv3CPUState struct's maintenance_irq field.  This will
only work if the board happens to have already wired up the CPU
maintenance IRQ before the GIC was realized.  Unfortunately this is
not the case for the 'virt' board, and so the value that gets copied
is NULL (since a qemu_irq is really a pointer to an IRQState struct
under the hood).  The effect is that the CPU interface code never
actually raises the maintenance interrupt line.

Instead, since the GICv3CPUState has a pointer to the CPUState, make
the dereference at the point where we want to raise the interrupt, to
avoid an implicit requirement on board code to wire things up in a
particular order.

Reported-by: Jose Martins <josemartins90@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20201009153904.28529-1-peter.maydell@linaro.org
Reviewed-by: Luc Michel <luc@lmichel.fr>
2020-11-02 16:52:17 +00:00

2678 lines
82 KiB
C
Raw Blame History

/*
* ARM Generic Interrupt Controller v3
*
* Copyright (c) 2016 Linaro Limited
* Written by Peter Maydell
*
* This code is licensed under the GPL, version 2 or (at your option)
* any later version.
*/
/* This file contains the code for the system register interface
* portions of the GICv3.
*/
#include "qemu/osdep.h"
#include "qemu/bitops.h"
#include "qemu/main-loop.h"
#include "trace.h"
#include "gicv3_internal.h"
#include "hw/irq.h"
#include "cpu.h"
void gicv3_set_gicv3state(CPUState *cpu, GICv3CPUState *s)
{
ARMCPU *arm_cpu = ARM_CPU(cpu);
CPUARMState *env = &arm_cpu->env;
env->gicv3state = (void *)s;
};
static GICv3CPUState *icc_cs_from_env(CPUARMState *env)
{
return env->gicv3state;
}
static bool gicv3_use_ns_bank(CPUARMState *env)
{
/* Return true if we should use the NonSecure bank for a banked GIC
* CPU interface register. Note that this differs from the
* access_secure_reg() function because GICv3 banked registers are
* banked even for AArch64, unlike the other CPU system registers.
*/
return !arm_is_secure_below_el3(env);
}
/* The minimum BPR for the virtual interface is a configurable property */
static inline int icv_min_vbpr(GICv3CPUState *cs)
{
return 7 - cs->vprebits;
}
/* Simple accessor functions for LR fields */
static uint32_t ich_lr_vintid(uint64_t lr)
{
return extract64(lr, ICH_LR_EL2_VINTID_SHIFT, ICH_LR_EL2_VINTID_LENGTH);
}
static uint32_t ich_lr_pintid(uint64_t lr)
{
return extract64(lr, ICH_LR_EL2_PINTID_SHIFT, ICH_LR_EL2_PINTID_LENGTH);
}
static uint32_t ich_lr_prio(uint64_t lr)
{
return extract64(lr, ICH_LR_EL2_PRIORITY_SHIFT, ICH_LR_EL2_PRIORITY_LENGTH);
}
static int ich_lr_state(uint64_t lr)
{
return extract64(lr, ICH_LR_EL2_STATE_SHIFT, ICH_LR_EL2_STATE_LENGTH);
}
static bool icv_access(CPUARMState *env, int hcr_flags)
{
/* Return true if this ICC_ register access should really be
* directed to an ICV_ access. hcr_flags is a mask of
* HCR_EL2 bits to check: we treat this as an ICV_ access
* if we are in NS EL1 and at least one of the specified
* HCR_EL2 bits is set.
*
* ICV registers fall into four categories:
* * access if NS EL1 and HCR_EL2.FMO == 1:
* all ICV regs with '0' in their name
* * access if NS EL1 and HCR_EL2.IMO == 1:
* all ICV regs with '1' in their name
* * access if NS EL1 and either IMO or FMO == 1:
* CTLR, DIR, PMR, RPR
*/
uint64_t hcr_el2 = arm_hcr_el2_eff(env);
bool flagmatch = hcr_el2 & hcr_flags & (HCR_IMO | HCR_FMO);
return flagmatch && arm_current_el(env) == 1
&& !arm_is_secure_below_el3(env);
}
static int read_vbpr(GICv3CPUState *cs, int grp)
{
/* Read VBPR value out of the VMCR field (caller must handle
* VCBPR effects if required)
*/
if (grp == GICV3_G0) {
return extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR0_SHIFT,
ICH_VMCR_EL2_VBPR0_LENGTH);
} else {
return extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR1_SHIFT,
ICH_VMCR_EL2_VBPR1_LENGTH);
}
}
static void write_vbpr(GICv3CPUState *cs, int grp, int value)
{
/* Write new VBPR1 value, handling the "writing a value less than
* the minimum sets it to the minimum" semantics.
*/
int min = icv_min_vbpr(cs);
if (grp != GICV3_G0) {
min++;
}
value = MAX(value, min);
if (grp == GICV3_G0) {
cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR0_SHIFT,
ICH_VMCR_EL2_VBPR0_LENGTH, value);
} else {
cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VBPR1_SHIFT,
ICH_VMCR_EL2_VBPR1_LENGTH, value);
}
}
static uint32_t icv_fullprio_mask(GICv3CPUState *cs)
{
/* Return a mask word which clears the unimplemented priority bits
* from a priority value for a virtual interrupt. (Not to be confused
* with the group priority, whose mask depends on the value of VBPR
* for the interrupt group.)
*/
return ~0U << (8 - cs->vpribits);
}
static int ich_highest_active_virt_prio(GICv3CPUState *cs)
{
/* Calculate the current running priority based on the set bits
* in the ICH Active Priority Registers.
*/
int i;
int aprmax = 1 << (cs->vprebits - 5);
assert(aprmax <= ARRAY_SIZE(cs->ich_apr[0]));
for (i = 0; i < aprmax; i++) {
uint32_t apr = cs->ich_apr[GICV3_G0][i] |
cs->ich_apr[GICV3_G1NS][i];
if (!apr) {
continue;
}
return (i * 32 + ctz32(apr)) << (icv_min_vbpr(cs) + 1);
}
/* No current active interrupts: return idle priority */
return 0xff;
}
static int hppvi_index(GICv3CPUState *cs)
{
/* Return the list register index of the highest priority pending
* virtual interrupt, as per the HighestPriorityVirtualInterrupt
* pseudocode. If no pending virtual interrupts, return -1.
*/
int idx = -1;
int i;
/* Note that a list register entry with a priority of 0xff will
* never be reported by this function; this is the architecturally
* correct behaviour.
*/
int prio = 0xff;
if (!(cs->ich_vmcr_el2 & (ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1))) {
/* Both groups disabled, definitely nothing to do */
return idx;
}
for (i = 0; i < cs->num_list_regs; i++) {
uint64_t lr = cs->ich_lr_el2[i];
int thisprio;
if (ich_lr_state(lr) != ICH_LR_EL2_STATE_PENDING) {
/* Not Pending */
continue;
}
/* Ignore interrupts if relevant group enable not set */
if (lr & ICH_LR_EL2_GROUP) {
if (!(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
continue;
}
} else {
if (!(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG0)) {
continue;
}
}
thisprio = ich_lr_prio(lr);
if (thisprio < prio) {
prio = thisprio;
idx = i;
}
}
return idx;
}
static uint32_t icv_gprio_mask(GICv3CPUState *cs, int group)
{
/* Return a mask word which clears the subpriority bits from
* a priority value for a virtual interrupt in the specified group.
* This depends on the VBPR value.
* If using VBPR0 then:
* a BPR of 0 means the group priority bits are [7:1];
* a BPR of 1 means they are [7:2], and so on down to
* a BPR of 7 meaning no group priority bits at all.
* If using VBPR1 then:
* a BPR of 0 is impossible (the minimum value is 1)
* a BPR of 1 means the group priority bits are [7:1];
* a BPR of 2 means they are [7:2], and so on down to
* a BPR of 7 meaning the group priority is [7].
*
* Which BPR to use depends on the group of the interrupt and
* the current ICH_VMCR_EL2.VCBPR settings.
*
* This corresponds to the VGroupBits() pseudocode.
*/
int bpr;
if (group == GICV3_G1NS && cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) {
group = GICV3_G0;
}
bpr = read_vbpr(cs, group);
if (group == GICV3_G1NS) {
assert(bpr > 0);
bpr--;
}
return ~0U << (bpr + 1);
}
static bool icv_hppi_can_preempt(GICv3CPUState *cs, uint64_t lr)
{
/* Return true if we can signal this virtual interrupt defined by
* the given list register value; see the pseudocode functions
* CanSignalVirtualInterrupt and CanSignalVirtualInt.
* Compare also icc_hppi_can_preempt() which is the non-virtual
* equivalent of these checks.
*/
int grp;
uint32_t mask, prio, rprio, vpmr;
if (!(cs->ich_hcr_el2 & ICH_HCR_EL2_EN)) {
/* Virtual interface disabled */
return false;
}
/* We don't need to check that this LR is in Pending state because
* that has already been done in hppvi_index().
*/
prio = ich_lr_prio(lr);
vpmr = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
ICH_VMCR_EL2_VPMR_LENGTH);
if (prio >= vpmr) {
/* Priority mask masks this interrupt */
return false;
}
rprio = ich_highest_active_virt_prio(cs);
if (rprio == 0xff) {
/* No running interrupt so we can preempt */
return true;
}
grp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
mask = icv_gprio_mask(cs, grp);
/* We only preempt a running interrupt if the pending interrupt's
* group priority is sufficient (the subpriorities are not considered).
*/
if ((prio & mask) < (rprio & mask)) {
return true;
}
return false;
}
static uint32_t eoi_maintenance_interrupt_state(GICv3CPUState *cs,
uint32_t *misr)
{
/* Return a set of bits indicating the EOI maintenance interrupt status
* for each list register. The EOI maintenance interrupt status is
* 1 if LR.State == 0 && LR.HW == 0 && LR.EOI == 1
* (see the GICv3 spec for the ICH_EISR_EL2 register).
* If misr is not NULL then we should also collect the information
* about the MISR.EOI, MISR.NP and MISR.U bits.
*/
uint32_t value = 0;
int validcount = 0;
bool seenpending = false;
int i;
for (i = 0; i < cs->num_list_regs; i++) {
uint64_t lr = cs->ich_lr_el2[i];
if ((lr & (ICH_LR_EL2_STATE_MASK | ICH_LR_EL2_HW | ICH_LR_EL2_EOI))
== ICH_LR_EL2_EOI) {
value |= (1 << i);
}
if ((lr & ICH_LR_EL2_STATE_MASK)) {
validcount++;
}
if (ich_lr_state(lr) == ICH_LR_EL2_STATE_PENDING) {
seenpending = true;
}
}
if (misr) {
if (validcount < 2 && (cs->ich_hcr_el2 & ICH_HCR_EL2_UIE)) {
*misr |= ICH_MISR_EL2_U;
}
if (!seenpending && (cs->ich_hcr_el2 & ICH_HCR_EL2_NPIE)) {
*misr |= ICH_MISR_EL2_NP;
}
if (value) {
*misr |= ICH_MISR_EL2_EOI;
}
}
return value;
}
static uint32_t maintenance_interrupt_state(GICv3CPUState *cs)
{
/* Return a set of bits indicating the maintenance interrupt status
* (as seen in the ICH_MISR_EL2 register).
*/
uint32_t value = 0;
/* Scan list registers and fill in the U, NP and EOI bits */
eoi_maintenance_interrupt_state(cs, &value);
if (cs->ich_hcr_el2 & (ICH_HCR_EL2_LRENPIE | ICH_HCR_EL2_EOICOUNT_MASK)) {
value |= ICH_MISR_EL2_LRENP;
}
if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP0EIE) &&
(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG0)) {
value |= ICH_MISR_EL2_VGRP0E;
}
if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP0DIE) &&
!(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
value |= ICH_MISR_EL2_VGRP0D;
}
if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP1EIE) &&
(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
value |= ICH_MISR_EL2_VGRP1E;
}
if ((cs->ich_hcr_el2 & ICH_HCR_EL2_VGRP1DIE) &&
!(cs->ich_vmcr_el2 & ICH_VMCR_EL2_VENG1)) {
value |= ICH_MISR_EL2_VGRP1D;
}
return value;
}
static void gicv3_cpuif_virt_update(GICv3CPUState *cs)
{
/* Tell the CPU about any pending virtual interrupts or
* maintenance interrupts, following a change to the state
* of the CPU interface relevant to virtual interrupts.
*
* CAUTION: this function will call qemu_set_irq() on the
* CPU maintenance IRQ line, which is typically wired up
* to the GIC as a per-CPU interrupt. This means that it
* will recursively call back into the GIC code via
* gicv3_redist_set_irq() and thus into the CPU interface code's
* gicv3_cpuif_update(). It is therefore important that this
* function is only called as the final action of a CPU interface
* register write implementation, after all the GIC state
* fields have been updated. gicv3_cpuif_update() also must
* not cause this function to be called, but that happens
* naturally as a result of there being no architectural
* linkage between the physical and virtual GIC logic.
*/
int idx;
int irqlevel = 0;
int fiqlevel = 0;
int maintlevel = 0;
ARMCPU *cpu = ARM_CPU(cs->cpu);
idx = hppvi_index(cs);
trace_gicv3_cpuif_virt_update(gicv3_redist_affid(cs), idx);
if (idx >= 0) {
uint64_t lr = cs->ich_lr_el2[idx];
if (icv_hppi_can_preempt(cs, lr)) {
/* Virtual interrupts are simple: G0 are always FIQ, and G1 IRQ */
if (lr & ICH_LR_EL2_GROUP) {
irqlevel = 1;
} else {
fiqlevel = 1;
}
}
}
if (cs->ich_hcr_el2 & ICH_HCR_EL2_EN) {
maintlevel = maintenance_interrupt_state(cs);
}
trace_gicv3_cpuif_virt_set_irqs(gicv3_redist_affid(cs), fiqlevel,
irqlevel, maintlevel);
qemu_set_irq(cs->parent_vfiq, fiqlevel);
qemu_set_irq(cs->parent_virq, irqlevel);
qemu_set_irq(cpu->gicv3_maintenance_interrupt, maintlevel);
}
static uint64_t icv_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
uint64_t value = cs->ich_apr[grp][regno];
trace_gicv3_icv_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
return value;
}
static void icv_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
trace_gicv3_icv_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU;
gicv3_cpuif_virt_update(cs);
return;
}
static uint64_t icv_bpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1NS;
uint64_t bpr;
bool satinc = false;
if (grp == GICV3_G1NS && (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR)) {
/* reads return bpr0 + 1 saturated to 7, writes ignored */
grp = GICV3_G0;
satinc = true;
}
bpr = read_vbpr(cs, grp);
if (satinc) {
bpr++;
bpr = MIN(bpr, 7);
}
trace_gicv3_icv_bpr_read(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), bpr);
return bpr;
}
static void icv_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1NS;
trace_gicv3_icv_bpr_write(ri->crm == 8 ? 0 : 1,
gicv3_redist_affid(cs), value);
if (grp == GICV3_G1NS && (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR)) {
/* reads return bpr0 + 1 saturated to 7, writes ignored */
return;
}
write_vbpr(cs, grp, value);
gicv3_cpuif_virt_update(cs);
}
static uint64_t icv_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value;
value = extract64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
ICH_VMCR_EL2_VPMR_LENGTH);
trace_gicv3_icv_pmr_read(gicv3_redist_affid(cs), value);
return value;
}
static void icv_pmr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
trace_gicv3_icv_pmr_write(gicv3_redist_affid(cs), value);
value &= icv_fullprio_mask(cs);
cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VPMR_SHIFT,
ICH_VMCR_EL2_VPMR_LENGTH, value);
gicv3_cpuif_virt_update(cs);
}
static uint64_t icv_igrpen_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int enbit;
uint64_t value;
enbit = ri->opc2 & 1 ? ICH_VMCR_EL2_VENG1_SHIFT : ICH_VMCR_EL2_VENG0_SHIFT;
value = extract64(cs->ich_vmcr_el2, enbit, 1);
trace_gicv3_icv_igrpen_read(ri->opc2 & 1 ? 1 : 0,
gicv3_redist_affid(cs), value);
return value;
}
static void icv_igrpen_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int enbit;
trace_gicv3_icv_igrpen_write(ri->opc2 & 1 ? 1 : 0,
gicv3_redist_affid(cs), value);
enbit = ri->opc2 & 1 ? ICH_VMCR_EL2_VENG1_SHIFT : ICH_VMCR_EL2_VENG0_SHIFT;
cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, enbit, 1, value);
gicv3_cpuif_virt_update(cs);
}
static uint64_t icv_ctlr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value;
/* Note that the fixed fields here (A3V, SEIS, IDbits, PRIbits)
* should match the ones reported in ich_vtr_read().
*/
value = ICC_CTLR_EL1_A3V | (1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
(7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
if (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VEOIM) {
value |= ICC_CTLR_EL1_EOIMODE;
}
if (cs->ich_vmcr_el2 & ICH_VMCR_EL2_VCBPR) {
value |= ICC_CTLR_EL1_CBPR;
}
trace_gicv3_icv_ctlr_read(gicv3_redist_affid(cs), value);
return value;
}
static void icv_ctlr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
trace_gicv3_icv_ctlr_write(gicv3_redist_affid(cs), value);
cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VCBPR_SHIFT,
1, value & ICC_CTLR_EL1_CBPR ? 1 : 0);
cs->ich_vmcr_el2 = deposit64(cs->ich_vmcr_el2, ICH_VMCR_EL2_VEOIM_SHIFT,
1, value & ICC_CTLR_EL1_EOIMODE ? 1 : 0);
gicv3_cpuif_virt_update(cs);
}
static uint64_t icv_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int prio = ich_highest_active_virt_prio(cs);
trace_gicv3_icv_rpr_read(gicv3_redist_affid(cs), prio);
return prio;
}
static uint64_t icv_hppir_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
int idx = hppvi_index(cs);
uint64_t value = INTID_SPURIOUS;
if (idx >= 0) {
uint64_t lr = cs->ich_lr_el2[idx];
int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
if (grp == thisgrp) {
value = ich_lr_vintid(lr);
}
}
trace_gicv3_icv_hppir_read(grp, gicv3_redist_affid(cs), value);
return value;
}
static void icv_activate_irq(GICv3CPUState *cs, int idx, int grp)
{
/* Activate the interrupt in the specified list register
* by moving it from Pending to Active state, and update the
* Active Priority Registers.
*/
uint32_t mask = icv_gprio_mask(cs, grp);
int prio = ich_lr_prio(cs->ich_lr_el2[idx]) & mask;
int aprbit = prio >> (8 - cs->vprebits);
int regno = aprbit / 32;
int regbit = aprbit % 32;
cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT;
cs->ich_lr_el2[idx] |= ICH_LR_EL2_STATE_ACTIVE_BIT;
cs->ich_apr[grp][regno] |= (1 << regbit);
}
static uint64_t icv_iar_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
int idx = hppvi_index(cs);
uint64_t intid = INTID_SPURIOUS;
if (idx >= 0) {
uint64_t lr = cs->ich_lr_el2[idx];
int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
if (thisgrp == grp && icv_hppi_can_preempt(cs, lr)) {
intid = ich_lr_vintid(lr);
if (intid < INTID_SECURE) {
icv_activate_irq(cs, idx, grp);
} else {
/* Interrupt goes from Pending to Invalid */
cs->ich_lr_el2[idx] &= ~ICH_LR_EL2_STATE_PENDING_BIT;
/* We will now return the (bogus) ID from the list register,
* as per the pseudocode.
*/
}
}
}
trace_gicv3_icv_iar_read(ri->crm == 8 ? 0 : 1,
gicv3_redist_affid(cs), intid);
gicv3_cpuif_virt_update(cs);
return intid;
}
static int icc_highest_active_prio(GICv3CPUState *cs)
{
/* Calculate the current running priority based on the set bits
* in the Active Priority Registers.
*/
int i;
for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) {
uint32_t apr = cs->icc_apr[GICV3_G0][i] |
cs->icc_apr[GICV3_G1][i] | cs->icc_apr[GICV3_G1NS][i];
if (!apr) {
continue;
}
return (i * 32 + ctz32(apr)) << (GIC_MIN_BPR + 1);
}
/* No current active interrupts: return idle priority */
return 0xff;
}
static uint32_t icc_gprio_mask(GICv3CPUState *cs, int group)
{
/* Return a mask word which clears the subpriority bits from
* a priority value for an interrupt in the specified group.
* This depends on the BPR value. For CBPR0 (S or NS):
* a BPR of 0 means the group priority bits are [7:1];
* a BPR of 1 means they are [7:2], and so on down to
* a BPR of 7 meaning no group priority bits at all.
* For CBPR1 NS:
* a BPR of 0 is impossible (the minimum value is 1)
* a BPR of 1 means the group priority bits are [7:1];
* a BPR of 2 means they are [7:2], and so on down to
* a BPR of 7 meaning the group priority is [7].
*
* Which BPR to use depends on the group of the interrupt and
* the current ICC_CTLR.CBPR settings.
*
* This corresponds to the GroupBits() pseudocode.
*/
int bpr;
if ((group == GICV3_G1 && cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR) ||
(group == GICV3_G1NS &&
cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
group = GICV3_G0;
}
bpr = cs->icc_bpr[group] & 7;
if (group == GICV3_G1NS) {
assert(bpr > 0);
bpr--;
}
return ~0U << (bpr + 1);
}
static bool icc_no_enabled_hppi(GICv3CPUState *cs)
{
/* Return true if there is no pending interrupt, or the
* highest priority pending interrupt is in a group which has been
* disabled at the CPU interface by the ICC_IGRPEN* register enable bits.
*/
return cs->hppi.prio == 0xff || (cs->icc_igrpen[cs->hppi.grp] == 0);
}
static bool icc_hppi_can_preempt(GICv3CPUState *cs)
{
/* Return true if we have a pending interrupt of sufficient
* priority to preempt.
*/
int rprio;
uint32_t mask;
if (icc_no_enabled_hppi(cs)) {
return false;
}
if (cs->hppi.prio >= cs->icc_pmr_el1) {
/* Priority mask masks this interrupt */
return false;
}
rprio = icc_highest_active_prio(cs);
if (rprio == 0xff) {
/* No currently running interrupt so we can preempt */
return true;
}
mask = icc_gprio_mask(cs, cs->hppi.grp);
/* We only preempt a running interrupt if the pending interrupt's
* group priority is sufficient (the subpriorities are not considered).
*/
if ((cs->hppi.prio & mask) < (rprio & mask)) {
return true;
}
return false;
}
void gicv3_cpuif_update(GICv3CPUState *cs)
{
/* Tell the CPU about its highest priority pending interrupt */
int irqlevel = 0;
int fiqlevel = 0;
ARMCPU *cpu = ARM_CPU(cs->cpu);
CPUARMState *env = &cpu->env;
g_assert(qemu_mutex_iothread_locked());
trace_gicv3_cpuif_update(gicv3_redist_affid(cs), cs->hppi.irq,
cs->hppi.grp, cs->hppi.prio);
if (cs->hppi.grp == GICV3_G1 && !arm_feature(env, ARM_FEATURE_EL3)) {
/* If a Security-enabled GIC sends a G1S interrupt to a
* Security-disabled CPU, we must treat it as if it were G0.
*/
cs->hppi.grp = GICV3_G0;
}
if (icc_hppi_can_preempt(cs)) {
/* We have an interrupt: should we signal it as IRQ or FIQ?
* This is described in the GICv3 spec section 4.6.2.
*/
bool isfiq;
switch (cs->hppi.grp) {
case GICV3_G0:
isfiq = true;
break;
case GICV3_G1:
isfiq = (!arm_is_secure(env) ||
(arm_current_el(env) == 3 && arm_el_is_aa64(env, 3)));
break;
case GICV3_G1NS:
isfiq = arm_is_secure(env);
break;
default:
g_assert_not_reached();
}
if (isfiq) {
fiqlevel = 1;
} else {
irqlevel = 1;
}
}
trace_gicv3_cpuif_set_irqs(gicv3_redist_affid(cs), fiqlevel, irqlevel);
qemu_set_irq(cs->parent_fiq, fiqlevel);
qemu_set_irq(cs->parent_irq, irqlevel);
}
static uint64_t icc_pmr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint32_t value = cs->icc_pmr_el1;
if (icv_access(env, HCR_FMO | HCR_IMO)) {
return icv_pmr_read(env, ri);
}
if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env) &&
(env->cp15.scr_el3 & SCR_FIQ)) {
/* NS access and Group 0 is inaccessible to NS: return the
* NS view of the current priority
*/
if ((value & 0x80) == 0) {
/* Secure priorities not visible to NS */
value = 0;
} else if (value != 0xff) {
value = (value << 1) & 0xff;
}
}
trace_gicv3_icc_pmr_read(gicv3_redist_affid(cs), value);
return value;
}
static void icc_pmr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
if (icv_access(env, HCR_FMO | HCR_IMO)) {
return icv_pmr_write(env, ri, value);
}
trace_gicv3_icc_pmr_write(gicv3_redist_affid(cs), value);
value &= 0xff;
if (arm_feature(env, ARM_FEATURE_EL3) && !arm_is_secure(env) &&
(env->cp15.scr_el3 & SCR_FIQ)) {
/* NS access and Group 0 is inaccessible to NS: return the
* NS view of the current priority
*/
if (!(cs->icc_pmr_el1 & 0x80)) {
/* Current PMR in the secure range, don't allow NS to change it */
return;
}
value = (value >> 1) | 0x80;
}
cs->icc_pmr_el1 = value;
gicv3_cpuif_update(cs);
}
static void icc_activate_irq(GICv3CPUState *cs, int irq)
{
/* Move the interrupt from the Pending state to Active, and update
* the Active Priority Registers
*/
uint32_t mask = icc_gprio_mask(cs, cs->hppi.grp);
int prio = cs->hppi.prio & mask;
int aprbit = prio >> 1;
int regno = aprbit / 32;
int regbit = aprbit % 32;
cs->icc_apr[cs->hppi.grp][regno] |= (1 << regbit);
if (irq < GIC_INTERNAL) {
cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 1);
cs->gicr_ipendr0 = deposit32(cs->gicr_ipendr0, irq, 1, 0);
gicv3_redist_update(cs);
} else {
gicv3_gicd_active_set(cs->gic, irq);
gicv3_gicd_pending_clear(cs->gic, irq);
gicv3_update(cs->gic, irq, 1);
}
}
static uint64_t icc_hppir0_value(GICv3CPUState *cs, CPUARMState *env)
{
/* Return the highest priority pending interrupt register value
* for group 0.
*/
bool irq_is_secure;
if (cs->hppi.prio == 0xff) {
return INTID_SPURIOUS;
}
/* Check whether we can return the interrupt or if we should return
* a special identifier, as per the CheckGroup0ForSpecialIdentifiers
* pseudocode. (We can simplify a little because for us ICC_SRE_EL1.RM
* is always zero.)
*/
irq_is_secure = (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) &&
(cs->hppi.grp != GICV3_G1NS));
if (cs->hppi.grp != GICV3_G0 && !arm_is_el3_or_mon(env)) {
return INTID_SPURIOUS;
}
if (irq_is_secure && !arm_is_secure(env)) {
/* Secure interrupts not visible to Nonsecure */
return INTID_SPURIOUS;
}
if (cs->hppi.grp != GICV3_G0) {
/* Indicate to EL3 that there's a Group 1 interrupt for the other
* state pending.
*/
return irq_is_secure ? INTID_SECURE : INTID_NONSECURE;
}
return cs->hppi.irq;
}
static uint64_t icc_hppir1_value(GICv3CPUState *cs, CPUARMState *env)
{
/* Return the highest priority pending interrupt register value
* for group 1.
*/
bool irq_is_secure;
if (cs->hppi.prio == 0xff) {
return INTID_SPURIOUS;
}
/* Check whether we can return the interrupt or if we should return
* a special identifier, as per the CheckGroup1ForSpecialIdentifiers
* pseudocode. (We can simplify a little because for us ICC_SRE_EL1.RM
* is always zero.)
*/
irq_is_secure = (!(cs->gic->gicd_ctlr & GICD_CTLR_DS) &&
(cs->hppi.grp != GICV3_G1NS));
if (cs->hppi.grp == GICV3_G0) {
/* Group 0 interrupts not visible via HPPIR1 */
return INTID_SPURIOUS;
}
if (irq_is_secure) {
if (!arm_is_secure(env)) {
/* Secure interrupts not visible in Non-secure */
return INTID_SPURIOUS;
}
} else if (!arm_is_el3_or_mon(env) && arm_is_secure(env)) {
/* Group 1 non-secure interrupts not visible in Secure EL1 */
return INTID_SPURIOUS;
}
return cs->hppi.irq;
}
static uint64_t icc_iar0_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t intid;
if (icv_access(env, HCR_FMO)) {
return icv_iar_read(env, ri);
}
if (!icc_hppi_can_preempt(cs)) {
intid = INTID_SPURIOUS;
} else {
intid = icc_hppir0_value(cs, env);
}
if (!(intid >= INTID_SECURE && intid <= INTID_SPURIOUS)) {
icc_activate_irq(cs, intid);
}
trace_gicv3_icc_iar0_read(gicv3_redist_affid(cs), intid);
return intid;
}
static uint64_t icc_iar1_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t intid;
if (icv_access(env, HCR_IMO)) {
return icv_iar_read(env, ri);
}
if (!icc_hppi_can_preempt(cs)) {
intid = INTID_SPURIOUS;
} else {
intid = icc_hppir1_value(cs, env);
}
if (!(intid >= INTID_SECURE && intid <= INTID_SPURIOUS)) {
icc_activate_irq(cs, intid);
}
trace_gicv3_icc_iar1_read(gicv3_redist_affid(cs), intid);
return intid;
}
static void icc_drop_prio(GICv3CPUState *cs, int grp)
{
/* Drop the priority of the currently active interrupt in
* the specified group.
*
* Note that we can guarantee (because of the requirement to nest
* ICC_IAR reads [which activate an interrupt and raise priority]
* with ICC_EOIR writes [which drop the priority for the interrupt])
* that the interrupt we're being called for is the highest priority
* active interrupt, meaning that it has the lowest set bit in the
* APR registers.
*
* If the guest does not honour the ordering constraints then the
* behaviour of the GIC is UNPREDICTABLE, which for us means that
* the values of the APR registers might become incorrect and the
* running priority will be wrong, so interrupts that should preempt
* might not do so, and interrupts that should not preempt might do so.
*/
int i;
for (i = 0; i < ARRAY_SIZE(cs->icc_apr[grp]); i++) {
uint64_t *papr = &cs->icc_apr[grp][i];
if (!*papr) {
continue;
}
/* Clear the lowest set bit */
*papr &= *papr - 1;
break;
}
/* running priority change means we need an update for this cpu i/f */
gicv3_cpuif_update(cs);
}
static bool icc_eoi_split(CPUARMState *env, GICv3CPUState *cs)
{
/* Return true if we should split priority drop and interrupt
* deactivation, ie whether the relevant EOIMode bit is set.
*/
if (arm_is_el3_or_mon(env)) {
return cs->icc_ctlr_el3 & ICC_CTLR_EL3_EOIMODE_EL3;
}
if (arm_is_secure_below_el3(env)) {
return cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_EOIMODE;
} else {
return cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE;
}
}
static int icc_highest_active_group(GICv3CPUState *cs)
{
/* Return the group with the highest priority active interrupt.
* We can do this by just comparing the APRs to see which one
* has the lowest set bit.
* (If more than one group is active at the same priority then
* we're in UNPREDICTABLE territory.)
*/
int i;
for (i = 0; i < ARRAY_SIZE(cs->icc_apr[0]); i++) {
int g0ctz = ctz32(cs->icc_apr[GICV3_G0][i]);
int g1ctz = ctz32(cs->icc_apr[GICV3_G1][i]);
int g1nsctz = ctz32(cs->icc_apr[GICV3_G1NS][i]);
if (g1nsctz < g0ctz && g1nsctz < g1ctz) {
return GICV3_G1NS;
}
if (g1ctz < g0ctz) {
return GICV3_G1;
}
if (g0ctz < 32) {
return GICV3_G0;
}
}
/* No set active bits? UNPREDICTABLE; return -1 so the caller
* ignores the spurious EOI attempt.
*/
return -1;
}
static void icc_deactivate_irq(GICv3CPUState *cs, int irq)
{
if (irq < GIC_INTERNAL) {
cs->gicr_iactiver0 = deposit32(cs->gicr_iactiver0, irq, 1, 0);
gicv3_redist_update(cs);
} else {
gicv3_gicd_active_clear(cs->gic, irq);
gicv3_update(cs->gic, irq, 1);
}
}
static bool icv_eoi_split(CPUARMState *env, GICv3CPUState *cs)
{
/* Return true if we should split priority drop and interrupt
* deactivation, ie whether the virtual EOIMode bit is set.
*/
return cs->ich_vmcr_el2 & ICH_VMCR_EL2_VEOIM;
}
static int icv_find_active(GICv3CPUState *cs, int irq)
{
/* Given an interrupt number for an active interrupt, return the index
* of the corresponding list register, or -1 if there is no match.
* Corresponds to FindActiveVirtualInterrupt pseudocode.
*/
int i;
for (i = 0; i < cs->num_list_regs; i++) {
uint64_t lr = cs->ich_lr_el2[i];
if ((lr & ICH_LR_EL2_STATE_ACTIVE_BIT) && ich_lr_vintid(lr) == irq) {
return i;
}
}
return -1;
}
static void icv_deactivate_irq(GICv3CPUState *cs, int idx)
{
/* Deactivate the interrupt in the specified list register index */
uint64_t lr = cs->ich_lr_el2[idx];
if (lr & ICH_LR_EL2_HW) {
/* Deactivate the associated physical interrupt */
int pirq = ich_lr_pintid(lr);
if (pirq < INTID_SECURE) {
icc_deactivate_irq(cs, pirq);
}
}
/* Clear the 'active' part of the state, so ActivePending->Pending
* and Active->Invalid.
*/
lr &= ~ICH_LR_EL2_STATE_ACTIVE_BIT;
cs->ich_lr_el2[idx] = lr;
}
static void icv_increment_eoicount(GICv3CPUState *cs)
{
/* Increment the EOICOUNT field in ICH_HCR_EL2 */
int eoicount = extract64(cs->ich_hcr_el2, ICH_HCR_EL2_EOICOUNT_SHIFT,
ICH_HCR_EL2_EOICOUNT_LENGTH);
cs->ich_hcr_el2 = deposit64(cs->ich_hcr_el2, ICH_HCR_EL2_EOICOUNT_SHIFT,
ICH_HCR_EL2_EOICOUNT_LENGTH, eoicount + 1);
}
static int icv_drop_prio(GICv3CPUState *cs)
{
/* Drop the priority of the currently active virtual interrupt
* (favouring group 0 if there is a set active bit at
* the same priority for both group 0 and group 1).
* Return the priority value for the bit we just cleared,
* or 0xff if no bits were set in the AP registers at all.
* Note that though the ich_apr[] are uint64_t only the low
* 32 bits are actually relevant.
*/
int i;
int aprmax = 1 << (cs->vprebits - 5);
assert(aprmax <= ARRAY_SIZE(cs->ich_apr[0]));
for (i = 0; i < aprmax; i++) {
uint64_t *papr0 = &cs->ich_apr[GICV3_G0][i];
uint64_t *papr1 = &cs->ich_apr[GICV3_G1NS][i];
int apr0count, apr1count;
if (!*papr0 && !*papr1) {
continue;
}
/* We can't just use the bit-twiddling hack icc_drop_prio() does
* because we need to return the bit number we cleared so
* it can be compared against the list register's priority field.
*/
apr0count = ctz32(*papr0);
apr1count = ctz32(*papr1);
if (apr0count <= apr1count) {
*papr0 &= *papr0 - 1;
return (apr0count + i * 32) << (icv_min_vbpr(cs) + 1);
} else {
*papr1 &= *papr1 - 1;
return (apr1count + i * 32) << (icv_min_vbpr(cs) + 1);
}
}
return 0xff;
}
static void icv_dir_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
/* Deactivate interrupt */
GICv3CPUState *cs = icc_cs_from_env(env);
int idx;
int irq = value & 0xffffff;
trace_gicv3_icv_dir_write(gicv3_redist_affid(cs), value);
if (irq >= cs->gic->num_irq) {
/* Also catches special interrupt numbers and LPIs */
return;
}
if (!icv_eoi_split(env, cs)) {
return;
}
idx = icv_find_active(cs, irq);
if (idx < 0) {
/* No list register matching this, so increment the EOI count
* (might trigger a maintenance interrupt)
*/
icv_increment_eoicount(cs);
} else {
icv_deactivate_irq(cs, idx);
}
gicv3_cpuif_virt_update(cs);
}
static void icv_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
/* End of Interrupt */
GICv3CPUState *cs = icc_cs_from_env(env);
int irq = value & 0xffffff;
int grp = ri->crm == 8 ? GICV3_G0 : GICV3_G1NS;
int idx, dropprio;
trace_gicv3_icv_eoir_write(ri->crm == 8 ? 0 : 1,
gicv3_redist_affid(cs), value);
if (irq >= cs->gic->num_irq) {
/* Also catches special interrupt numbers and LPIs */
return;
}
/* We implement the IMPDEF choice of "drop priority before doing
* error checks" (because that lets us avoid scanning the AP
* registers twice).
*/
dropprio = icv_drop_prio(cs);
if (dropprio == 0xff) {
/* No active interrupt. It is CONSTRAINED UNPREDICTABLE
* whether the list registers are checked in this
* situation; we choose not to.
*/
return;
}
idx = icv_find_active(cs, irq);
if (idx < 0) {
/* No valid list register corresponding to EOI ID */
icv_increment_eoicount(cs);
} else {
uint64_t lr = cs->ich_lr_el2[idx];
int thisgrp = (lr & ICH_LR_EL2_GROUP) ? GICV3_G1NS : GICV3_G0;
int lr_gprio = ich_lr_prio(lr) & icv_gprio_mask(cs, grp);
if (thisgrp == grp && lr_gprio == dropprio) {
if (!icv_eoi_split(env, cs)) {
/* Priority drop and deactivate not split: deactivate irq now */
icv_deactivate_irq(cs, idx);
}
}
}
gicv3_cpuif_virt_update(cs);
}
static void icc_eoir_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
/* End of Interrupt */
GICv3CPUState *cs = icc_cs_from_env(env);
int irq = value & 0xffffff;
int grp;
if (icv_access(env, ri->crm == 8 ? HCR_FMO : HCR_IMO)) {
icv_eoir_write(env, ri, value);
return;
}
trace_gicv3_icc_eoir_write(ri->crm == 8 ? 0 : 1,
gicv3_redist_affid(cs), value);
if (ri->crm == 8) {
/* EOIR0 */
grp = GICV3_G0;
} else {
/* EOIR1 */
if (arm_is_secure(env)) {
grp = GICV3_G1;
} else {
grp = GICV3_G1NS;
}
}
if (irq >= cs->gic->num_irq) {
/* This handles two cases:
* 1. If software writes the ID of a spurious interrupt [ie 1020-1023]
* to the GICC_EOIR, the GIC ignores that write.
* 2. If software writes the number of a non-existent interrupt
* this must be a subcase of "value written does not match the last
* valid interrupt value read from the Interrupt Acknowledge
* register" and so this is UNPREDICTABLE. We choose to ignore it.
*/
return;
}
if (icc_highest_active_group(cs) != grp) {
return;
}
icc_drop_prio(cs, grp);
if (!icc_eoi_split(env, cs)) {
/* Priority drop and deactivate not split: deactivate irq now */
icc_deactivate_irq(cs, irq);
}
}
static uint64_t icc_hppir0_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value;
if (icv_access(env, HCR_FMO)) {
return icv_hppir_read(env, ri);
}
value = icc_hppir0_value(cs, env);
trace_gicv3_icc_hppir0_read(gicv3_redist_affid(cs), value);
return value;
}
static uint64_t icc_hppir1_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value;
if (icv_access(env, HCR_IMO)) {
return icv_hppir_read(env, ri);
}
value = icc_hppir1_value(cs, env);
trace_gicv3_icc_hppir1_read(gicv3_redist_affid(cs), value);
return value;
}
static uint64_t icc_bpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1;
bool satinc = false;
uint64_t bpr;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
return icv_bpr_read(env, ri);
}
if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
grp = GICV3_G1NS;
}
if (grp == GICV3_G1 && !arm_is_el3_or_mon(env) &&
(cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR)) {
/* CBPR_EL1S means secure EL1 or AArch32 EL3 !Mon BPR1 accesses
* modify BPR0
*/
grp = GICV3_G0;
}
if (grp == GICV3_G1NS && arm_current_el(env) < 3 &&
(cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
/* reads return bpr0 + 1 sat to 7, writes ignored */
grp = GICV3_G0;
satinc = true;
}
bpr = cs->icc_bpr[grp];
if (satinc) {
bpr++;
bpr = MIN(bpr, 7);
}
trace_gicv3_icc_bpr_read(ri->crm == 8 ? 0 : 1, gicv3_redist_affid(cs), bpr);
return bpr;
}
static void icc_bpr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = (ri->crm == 8) ? GICV3_G0 : GICV3_G1;
uint64_t minval;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
icv_bpr_write(env, ri, value);
return;
}
trace_gicv3_icc_bpr_write(ri->crm == 8 ? 0 : 1,
gicv3_redist_affid(cs), value);
if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
grp = GICV3_G1NS;
}
if (grp == GICV3_G1 && !arm_is_el3_or_mon(env) &&
(cs->icc_ctlr_el1[GICV3_S] & ICC_CTLR_EL1_CBPR)) {
/* CBPR_EL1S means secure EL1 or AArch32 EL3 !Mon BPR1 accesses
* modify BPR0
*/
grp = GICV3_G0;
}
if (grp == GICV3_G1NS && arm_current_el(env) < 3 &&
(cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR)) {
/* reads return bpr0 + 1 sat to 7, writes ignored */
return;
}
minval = (grp == GICV3_G1NS) ? GIC_MIN_BPR_NS : GIC_MIN_BPR;
if (value < minval) {
value = minval;
}
cs->icc_bpr[grp] = value & 7;
gicv3_cpuif_update(cs);
}
static uint64_t icc_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value;
int regno = ri->opc2 & 3;
int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
return icv_ap_read(env, ri);
}
if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
grp = GICV3_G1NS;
}
value = cs->icc_apr[grp][regno];
trace_gicv3_icc_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
return value;
}
static void icc_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
int grp = (ri->crm & 1) ? GICV3_G1 : GICV3_G0;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
icv_ap_write(env, ri, value);
return;
}
trace_gicv3_icc_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
grp = GICV3_G1NS;
}
/* It's not possible to claim that a Non-secure interrupt is active
* at a priority outside the Non-secure range (128..255), since this
* would otherwise allow malicious NS code to block delivery of S interrupts
* by writing a bad value to these registers.
*/
if (grp == GICV3_G1NS && regno < 2 && arm_feature(env, ARM_FEATURE_EL3)) {
return;
}
cs->icc_apr[grp][regno] = value & 0xFFFFFFFFU;
gicv3_cpuif_update(cs);
}
static void icc_dir_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
/* Deactivate interrupt */
GICv3CPUState *cs = icc_cs_from_env(env);
int irq = value & 0xffffff;
bool irq_is_secure, single_sec_state, irq_is_grp0;
bool route_fiq_to_el3, route_irq_to_el3, route_fiq_to_el2, route_irq_to_el2;
if (icv_access(env, HCR_FMO | HCR_IMO)) {
icv_dir_write(env, ri, value);
return;
}
trace_gicv3_icc_dir_write(gicv3_redist_affid(cs), value);
if (irq >= cs->gic->num_irq) {
/* Also catches special interrupt numbers and LPIs */
return;
}
if (!icc_eoi_split(env, cs)) {
return;
}
int grp = gicv3_irq_group(cs->gic, cs, irq);
single_sec_state = cs->gic->gicd_ctlr & GICD_CTLR_DS;
irq_is_secure = !single_sec_state && (grp != GICV3_G1NS);
irq_is_grp0 = grp == GICV3_G0;
/* Check whether we're allowed to deactivate this interrupt based
* on its group and the current CPU state.
* These checks are laid out to correspond to the spec's pseudocode.
*/
route_fiq_to_el3 = env->cp15.scr_el3 & SCR_FIQ;
route_irq_to_el3 = env->cp15.scr_el3 & SCR_IRQ;
/* No need to include !IsSecure in route_*_to_el2 as it's only
* tested in cases where we know !IsSecure is true.
*/
uint64_t hcr_el2 = arm_hcr_el2_eff(env);
route_fiq_to_el2 = hcr_el2 & HCR_FMO;
route_irq_to_el2 = hcr_el2 & HCR_IMO;
switch (arm_current_el(env)) {
case 3:
break;
case 2:
if (single_sec_state && irq_is_grp0 && !route_fiq_to_el3) {
break;
}
if (!irq_is_secure && !irq_is_grp0 && !route_irq_to_el3) {
break;
}
return;
case 1:
if (!arm_is_secure_below_el3(env)) {
if (single_sec_state && irq_is_grp0 &&
!route_fiq_to_el3 && !route_fiq_to_el2) {
break;
}
if (!irq_is_secure && !irq_is_grp0 &&
!route_irq_to_el3 && !route_irq_to_el2) {
break;
}
} else {
if (irq_is_grp0 && !route_fiq_to_el3) {
break;
}
if (!irq_is_grp0 &&
(!irq_is_secure || !single_sec_state) &&
!route_irq_to_el3) {
break;
}
}
return;
default:
g_assert_not_reached();
}
icc_deactivate_irq(cs, irq);
}
static uint64_t icc_rpr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int prio;
if (icv_access(env, HCR_FMO | HCR_IMO)) {
return icv_rpr_read(env, ri);
}
prio = icc_highest_active_prio(cs);
if (arm_feature(env, ARM_FEATURE_EL3) &&
!arm_is_secure(env) && (env->cp15.scr_el3 & SCR_FIQ)) {
/* NS GIC access and Group 0 is inaccessible to NS */
if ((prio & 0x80) == 0) {
/* NS mustn't see priorities in the Secure half of the range */
prio = 0;
} else if (prio != 0xff) {
/* Non-idle priority: show the Non-secure view of it */
prio = (prio << 1) & 0xff;
}
}
trace_gicv3_icc_rpr_read(gicv3_redist_affid(cs), prio);
return prio;
}
static void icc_generate_sgi(CPUARMState *env, GICv3CPUState *cs,
uint64_t value, int grp, bool ns)
{
GICv3State *s = cs->gic;
/* Extract Aff3/Aff2/Aff1 and shift into the bottom 24 bits */
uint64_t aff = extract64(value, 48, 8) << 16 |
extract64(value, 32, 8) << 8 |
extract64(value, 16, 8);
uint32_t targetlist = extract64(value, 0, 16);
uint32_t irq = extract64(value, 24, 4);
bool irm = extract64(value, 40, 1);
int i;
if (grp == GICV3_G1 && s->gicd_ctlr & GICD_CTLR_DS) {
/* If GICD_CTLR.DS == 1, the Distributor treats Secure Group 1
* interrupts as Group 0 interrupts and must send Secure Group 0
* interrupts to the target CPUs.
*/
grp = GICV3_G0;
}
trace_gicv3_icc_generate_sgi(gicv3_redist_affid(cs), irq, irm,
aff, targetlist);
for (i = 0; i < s->num_cpu; i++) {
GICv3CPUState *ocs = &s->cpu[i];
if (irm) {
/* IRM == 1 : route to all CPUs except self */
if (cs == ocs) {
continue;
}
} else {
/* IRM == 0 : route to Aff3.Aff2.Aff1.n for all n in [0..15]
* where the corresponding bit is set in targetlist
*/
int aff0;
if (ocs->gicr_typer >> 40 != aff) {
continue;
}
aff0 = extract64(ocs->gicr_typer, 32, 8);
if (aff0 > 15 || extract32(targetlist, aff0, 1) == 0) {
continue;
}
}
/* The redistributor will check against its own GICR_NSACR as needed */
gicv3_redist_send_sgi(ocs, grp, irq, ns);
}
}
static void icc_sgi0r_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
/* Generate Secure Group 0 SGI. */
GICv3CPUState *cs = icc_cs_from_env(env);
bool ns = !arm_is_secure(env);
icc_generate_sgi(env, cs, value, GICV3_G0, ns);
}
static void icc_sgi1r_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
/* Generate Group 1 SGI for the current Security state */
GICv3CPUState *cs = icc_cs_from_env(env);
int grp;
bool ns = !arm_is_secure(env);
grp = ns ? GICV3_G1NS : GICV3_G1;
icc_generate_sgi(env, cs, value, grp, ns);
}
static void icc_asgi1r_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
/* Generate Group 1 SGI for the Security state that is not
* the current state
*/
GICv3CPUState *cs = icc_cs_from_env(env);
int grp;
bool ns = !arm_is_secure(env);
grp = ns ? GICV3_G1 : GICV3_G1NS;
icc_generate_sgi(env, cs, value, grp, ns);
}
static uint64_t icc_igrpen_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = ri->opc2 & 1 ? GICV3_G1 : GICV3_G0;
uint64_t value;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
return icv_igrpen_read(env, ri);
}
if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
grp = GICV3_G1NS;
}
value = cs->icc_igrpen[grp];
trace_gicv3_icc_igrpen_read(ri->opc2 & 1 ? 1 : 0,
gicv3_redist_affid(cs), value);
return value;
}
static void icc_igrpen_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int grp = ri->opc2 & 1 ? GICV3_G1 : GICV3_G0;
if (icv_access(env, grp == GICV3_G0 ? HCR_FMO : HCR_IMO)) {
icv_igrpen_write(env, ri, value);
return;
}
trace_gicv3_icc_igrpen_write(ri->opc2 & 1 ? 1 : 0,
gicv3_redist_affid(cs), value);
if (grp == GICV3_G1 && gicv3_use_ns_bank(env)) {
grp = GICV3_G1NS;
}
cs->icc_igrpen[grp] = value & ICC_IGRPEN_ENABLE;
gicv3_cpuif_update(cs);
}
static uint64_t icc_igrpen1_el3_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value;
/* IGRPEN1_EL3 bits 0 and 1 are r/w aliases into IGRPEN1_EL1 NS and S */
value = cs->icc_igrpen[GICV3_G1NS] | (cs->icc_igrpen[GICV3_G1] << 1);
trace_gicv3_icc_igrpen1_el3_read(gicv3_redist_affid(cs), value);
return value;
}
static void icc_igrpen1_el3_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
trace_gicv3_icc_igrpen1_el3_write(gicv3_redist_affid(cs), value);
/* IGRPEN1_EL3 bits 0 and 1 are r/w aliases into IGRPEN1_EL1 NS and S */
cs->icc_igrpen[GICV3_G1NS] = extract32(value, 0, 1);
cs->icc_igrpen[GICV3_G1] = extract32(value, 1, 1);
gicv3_cpuif_update(cs);
}
static uint64_t icc_ctlr_el1_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int bank = gicv3_use_ns_bank(env) ? GICV3_NS : GICV3_S;
uint64_t value;
if (icv_access(env, HCR_FMO | HCR_IMO)) {
return icv_ctlr_read(env, ri);
}
value = cs->icc_ctlr_el1[bank];
trace_gicv3_icc_ctlr_read(gicv3_redist_affid(cs), value);
return value;
}
static void icc_ctlr_el1_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int bank = gicv3_use_ns_bank(env) ? GICV3_NS : GICV3_S;
uint64_t mask;
if (icv_access(env, HCR_FMO | HCR_IMO)) {
icv_ctlr_write(env, ri, value);
return;
}
trace_gicv3_icc_ctlr_write(gicv3_redist_affid(cs), value);
/* Only CBPR and EOIMODE can be RW;
* for us PMHE is RAZ/WI (we don't implement 1-of-N interrupts or
* the asseciated priority-based routing of them);
* if EL3 is implemented and GICD_CTLR.DS == 0, then PMHE and CBPR are RO.
*/
if (arm_feature(env, ARM_FEATURE_EL3) &&
((cs->gic->gicd_ctlr & GICD_CTLR_DS) == 0)) {
mask = ICC_CTLR_EL1_EOIMODE;
} else {
mask = ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE;
}
cs->icc_ctlr_el1[bank] &= ~mask;
cs->icc_ctlr_el1[bank] |= (value & mask);
gicv3_cpuif_update(cs);
}
static uint64_t icc_ctlr_el3_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value;
value = cs->icc_ctlr_el3;
if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE) {
value |= ICC_CTLR_EL3_EOIMODE_EL1NS;
}
if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR) {
value |= ICC_CTLR_EL3_CBPR_EL1NS;
}
if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_EOIMODE) {
value |= ICC_CTLR_EL3_EOIMODE_EL1S;
}
if (cs->icc_ctlr_el1[GICV3_NS] & ICC_CTLR_EL1_CBPR) {
value |= ICC_CTLR_EL3_CBPR_EL1S;
}
trace_gicv3_icc_ctlr_el3_read(gicv3_redist_affid(cs), value);
return value;
}
static void icc_ctlr_el3_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t mask;
trace_gicv3_icc_ctlr_el3_write(gicv3_redist_affid(cs), value);
/* *_EL1NS and *_EL1S bits are aliases into the ICC_CTLR_EL1 bits. */
cs->icc_ctlr_el1[GICV3_NS] &= ~(ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE);
if (value & ICC_CTLR_EL3_EOIMODE_EL1NS) {
cs->icc_ctlr_el1[GICV3_NS] |= ICC_CTLR_EL1_EOIMODE;
}
if (value & ICC_CTLR_EL3_CBPR_EL1NS) {
cs->icc_ctlr_el1[GICV3_NS] |= ICC_CTLR_EL1_CBPR;
}
cs->icc_ctlr_el1[GICV3_S] &= ~(ICC_CTLR_EL1_CBPR | ICC_CTLR_EL1_EOIMODE);
if (value & ICC_CTLR_EL3_EOIMODE_EL1S) {
cs->icc_ctlr_el1[GICV3_S] |= ICC_CTLR_EL1_EOIMODE;
}
if (value & ICC_CTLR_EL3_CBPR_EL1S) {
cs->icc_ctlr_el1[GICV3_S] |= ICC_CTLR_EL1_CBPR;
}
/* The only bit stored in icc_ctlr_el3 which is writeable is EOIMODE_EL3: */
mask = ICC_CTLR_EL3_EOIMODE_EL3;
cs->icc_ctlr_el3 &= ~mask;
cs->icc_ctlr_el3 |= (value & mask);
gicv3_cpuif_update(cs);
}
static CPAccessResult gicv3_irqfiq_access(CPUARMState *env,
const ARMCPRegInfo *ri, bool isread)
{
CPAccessResult r = CP_ACCESS_OK;
GICv3CPUState *cs = icc_cs_from_env(env);
int el = arm_current_el(env);
if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TC) &&
el == 1 && !arm_is_secure_below_el3(env)) {
/* Takes priority over a possible EL3 trap */
return CP_ACCESS_TRAP_EL2;
}
if ((env->cp15.scr_el3 & (SCR_FIQ | SCR_IRQ)) == (SCR_FIQ | SCR_IRQ)) {
switch (el) {
case 1:
/* Note that arm_hcr_el2_eff takes secure state into account. */
if ((arm_hcr_el2_eff(env) & (HCR_IMO | HCR_FMO)) == 0) {
r = CP_ACCESS_TRAP_EL3;
}
break;
case 2:
r = CP_ACCESS_TRAP_EL3;
break;
case 3:
if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
r = CP_ACCESS_TRAP_EL3;
}
break;
default:
g_assert_not_reached();
}
}
if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
r = CP_ACCESS_TRAP;
}
return r;
}
static CPAccessResult gicv3_dir_access(CPUARMState *env,
const ARMCPRegInfo *ri, bool isread)
{
GICv3CPUState *cs = icc_cs_from_env(env);
if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TDIR) &&
arm_current_el(env) == 1 && !arm_is_secure_below_el3(env)) {
/* Takes priority over a possible EL3 trap */
return CP_ACCESS_TRAP_EL2;
}
return gicv3_irqfiq_access(env, ri, isread);
}
static CPAccessResult gicv3_sgi_access(CPUARMState *env,
const ARMCPRegInfo *ri, bool isread)
{
if (arm_current_el(env) == 1 &&
(arm_hcr_el2_eff(env) & (HCR_IMO | HCR_FMO)) != 0) {
/* Takes priority over a possible EL3 trap */
return CP_ACCESS_TRAP_EL2;
}
return gicv3_irqfiq_access(env, ri, isread);
}
static CPAccessResult gicv3_fiq_access(CPUARMState *env,
const ARMCPRegInfo *ri, bool isread)
{
CPAccessResult r = CP_ACCESS_OK;
GICv3CPUState *cs = icc_cs_from_env(env);
int el = arm_current_el(env);
if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TALL0) &&
el == 1 && !arm_is_secure_below_el3(env)) {
/* Takes priority over a possible EL3 trap */
return CP_ACCESS_TRAP_EL2;
}
if (env->cp15.scr_el3 & SCR_FIQ) {
switch (el) {
case 1:
if ((arm_hcr_el2_eff(env) & HCR_FMO) == 0) {
r = CP_ACCESS_TRAP_EL3;
}
break;
case 2:
r = CP_ACCESS_TRAP_EL3;
break;
case 3:
if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
r = CP_ACCESS_TRAP_EL3;
}
break;
default:
g_assert_not_reached();
}
}
if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
r = CP_ACCESS_TRAP;
}
return r;
}
static CPAccessResult gicv3_irq_access(CPUARMState *env,
const ARMCPRegInfo *ri, bool isread)
{
CPAccessResult r = CP_ACCESS_OK;
GICv3CPUState *cs = icc_cs_from_env(env);
int el = arm_current_el(env);
if ((cs->ich_hcr_el2 & ICH_HCR_EL2_TALL1) &&
el == 1 && !arm_is_secure_below_el3(env)) {
/* Takes priority over a possible EL3 trap */
return CP_ACCESS_TRAP_EL2;
}
if (env->cp15.scr_el3 & SCR_IRQ) {
switch (el) {
case 1:
if ((arm_hcr_el2_eff(env) & HCR_IMO) == 0) {
r = CP_ACCESS_TRAP_EL3;
}
break;
case 2:
r = CP_ACCESS_TRAP_EL3;
break;
case 3:
if (!is_a64(env) && !arm_is_el3_or_mon(env)) {
r = CP_ACCESS_TRAP_EL3;
}
break;
default:
g_assert_not_reached();
}
}
if (r == CP_ACCESS_TRAP_EL3 && !arm_el_is_aa64(env, 3)) {
r = CP_ACCESS_TRAP;
}
return r;
}
static void icc_reset(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
cs->icc_ctlr_el1[GICV3_S] = ICC_CTLR_EL1_A3V |
(1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
(7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
cs->icc_ctlr_el1[GICV3_NS] = ICC_CTLR_EL1_A3V |
(1 << ICC_CTLR_EL1_IDBITS_SHIFT) |
(7 << ICC_CTLR_EL1_PRIBITS_SHIFT);
cs->icc_pmr_el1 = 0;
cs->icc_bpr[GICV3_G0] = GIC_MIN_BPR;
cs->icc_bpr[GICV3_G1] = GIC_MIN_BPR;
cs->icc_bpr[GICV3_G1NS] = GIC_MIN_BPR_NS;
memset(cs->icc_apr, 0, sizeof(cs->icc_apr));
memset(cs->icc_igrpen, 0, sizeof(cs->icc_igrpen));
cs->icc_ctlr_el3 = ICC_CTLR_EL3_NDS | ICC_CTLR_EL3_A3V |
(1 << ICC_CTLR_EL3_IDBITS_SHIFT) |
(7 << ICC_CTLR_EL3_PRIBITS_SHIFT);
memset(cs->ich_apr, 0, sizeof(cs->ich_apr));
cs->ich_hcr_el2 = 0;
memset(cs->ich_lr_el2, 0, sizeof(cs->ich_lr_el2));
cs->ich_vmcr_el2 = ICH_VMCR_EL2_VFIQEN |
((icv_min_vbpr(cs) + 1) << ICH_VMCR_EL2_VBPR1_SHIFT) |
(icv_min_vbpr(cs) << ICH_VMCR_EL2_VBPR0_SHIFT);
}
static const ARMCPRegInfo gicv3_cpuif_reginfo[] = {
{ .name = "ICC_PMR_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 4, .crm = 6, .opc2 = 0,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irqfiq_access,
.readfn = icc_pmr_read,
.writefn = icc_pmr_write,
/* We hang the whole cpu interface reset routine off here
* rather than parcelling it out into one little function
* per register
*/
.resetfn = icc_reset,
},
{ .name = "ICC_IAR0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 0,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_R, .accessfn = gicv3_fiq_access,
.readfn = icc_iar0_read,
},
{ .name = "ICC_EOIR0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 1,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_fiq_access,
.writefn = icc_eoir_write,
},
{ .name = "ICC_HPPIR0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 2,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_R, .accessfn = gicv3_fiq_access,
.readfn = icc_hppir0_read,
},
{ .name = "ICC_BPR0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 3,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_fiq_access,
.readfn = icc_bpr_read,
.writefn = icc_bpr_write,
},
{ .name = "ICC_AP0R0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 4,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_fiq_access,
.readfn = icc_ap_read,
.writefn = icc_ap_write,
},
{ .name = "ICC_AP0R1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 5,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_fiq_access,
.readfn = icc_ap_read,
.writefn = icc_ap_write,
},
{ .name = "ICC_AP0R2_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 6,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_fiq_access,
.readfn = icc_ap_read,
.writefn = icc_ap_write,
},
{ .name = "ICC_AP0R3_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 8, .opc2 = 7,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_fiq_access,
.readfn = icc_ap_read,
.writefn = icc_ap_write,
},
/* All the ICC_AP1R*_EL1 registers are banked */
{ .name = "ICC_AP1R0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 0,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irq_access,
.readfn = icc_ap_read,
.writefn = icc_ap_write,
},
{ .name = "ICC_AP1R1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 1,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irq_access,
.readfn = icc_ap_read,
.writefn = icc_ap_write,
},
{ .name = "ICC_AP1R2_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 2,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irq_access,
.readfn = icc_ap_read,
.writefn = icc_ap_write,
},
{ .name = "ICC_AP1R3_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 9, .opc2 = 3,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irq_access,
.readfn = icc_ap_read,
.writefn = icc_ap_write,
},
{ .name = "ICC_DIR_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 1,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_dir_access,
.writefn = icc_dir_write,
},
{ .name = "ICC_RPR_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 3,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_R, .accessfn = gicv3_irqfiq_access,
.readfn = icc_rpr_read,
},
{ .name = "ICC_SGI1R_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 5,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_sgi_access,
.writefn = icc_sgi1r_write,
},
{ .name = "ICC_SGI1R",
.cp = 15, .opc1 = 0, .crm = 12,
.type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_sgi_access,
.writefn = icc_sgi1r_write,
},
{ .name = "ICC_ASGI1R_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 6,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_sgi_access,
.writefn = icc_asgi1r_write,
},
{ .name = "ICC_ASGI1R",
.cp = 15, .opc1 = 1, .crm = 12,
.type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_sgi_access,
.writefn = icc_asgi1r_write,
},
{ .name = "ICC_SGI0R_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 11, .opc2 = 7,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_sgi_access,
.writefn = icc_sgi0r_write,
},
{ .name = "ICC_SGI0R",
.cp = 15, .opc1 = 2, .crm = 12,
.type = ARM_CP_64BIT | ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_sgi_access,
.writefn = icc_sgi0r_write,
},
{ .name = "ICC_IAR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 0,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_R, .accessfn = gicv3_irq_access,
.readfn = icc_iar1_read,
},
{ .name = "ICC_EOIR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 1,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_W, .accessfn = gicv3_irq_access,
.writefn = icc_eoir_write,
},
{ .name = "ICC_HPPIR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 2,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_R, .accessfn = gicv3_irq_access,
.readfn = icc_hppir1_read,
},
/* This register is banked */
{ .name = "ICC_BPR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 3,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irq_access,
.readfn = icc_bpr_read,
.writefn = icc_bpr_write,
},
/* This register is banked */
{ .name = "ICC_CTLR_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 4,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irqfiq_access,
.readfn = icc_ctlr_el1_read,
.writefn = icc_ctlr_el1_write,
},
{ .name = "ICC_SRE_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 5,
.type = ARM_CP_NO_RAW | ARM_CP_CONST,
.access = PL1_RW,
/* We don't support IRQ/FIQ bypass and system registers are
* always enabled, so all our bits are RAZ/WI or RAO/WI.
* This register is banked but since it's constant we don't
* need to do anything special.
*/
.resetvalue = 0x7,
},
{ .name = "ICC_IGRPEN0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 6,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_fiq_access,
.readfn = icc_igrpen_read,
.writefn = icc_igrpen_write,
},
/* This register is banked */
{ .name = "ICC_IGRPEN1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 0, .crn = 12, .crm = 12, .opc2 = 7,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL1_RW, .accessfn = gicv3_irq_access,
.readfn = icc_igrpen_read,
.writefn = icc_igrpen_write,
},
{ .name = "ICC_SRE_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 5,
.type = ARM_CP_NO_RAW | ARM_CP_CONST,
.access = PL2_RW,
/* We don't support IRQ/FIQ bypass and system registers are
* always enabled, so all our bits are RAZ/WI or RAO/WI.
*/
.resetvalue = 0xf,
},
{ .name = "ICC_CTLR_EL3", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 4,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL3_RW,
.readfn = icc_ctlr_el3_read,
.writefn = icc_ctlr_el3_write,
},
{ .name = "ICC_SRE_EL3", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 5,
.type = ARM_CP_NO_RAW | ARM_CP_CONST,
.access = PL3_RW,
/* We don't support IRQ/FIQ bypass and system registers are
* always enabled, so all our bits are RAZ/WI or RAO/WI.
*/
.resetvalue = 0xf,
},
{ .name = "ICC_IGRPEN1_EL3", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 6, .crn = 12, .crm = 12, .opc2 = 7,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL3_RW,
.readfn = icc_igrpen1_el3_read,
.writefn = icc_igrpen1_el3_write,
},
REGINFO_SENTINEL
};
static uint64_t ich_ap_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
uint64_t value;
value = cs->ich_apr[grp][regno];
trace_gicv3_ich_ap_read(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
return value;
}
static void ich_ap_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 & 3;
int grp = (ri->crm & 1) ? GICV3_G1NS : GICV3_G0;
trace_gicv3_ich_ap_write(ri->crm & 1, regno, gicv3_redist_affid(cs), value);
cs->ich_apr[grp][regno] = value & 0xFFFFFFFFU;
gicv3_cpuif_virt_update(cs);
}
static uint64_t ich_hcr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value = cs->ich_hcr_el2;
trace_gicv3_ich_hcr_read(gicv3_redist_affid(cs), value);
return value;
}
static void ich_hcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
trace_gicv3_ich_hcr_write(gicv3_redist_affid(cs), value);
value &= ICH_HCR_EL2_EN | ICH_HCR_EL2_UIE | ICH_HCR_EL2_LRENPIE |
ICH_HCR_EL2_NPIE | ICH_HCR_EL2_VGRP0EIE | ICH_HCR_EL2_VGRP0DIE |
ICH_HCR_EL2_VGRP1EIE | ICH_HCR_EL2_VGRP1DIE | ICH_HCR_EL2_TC |
ICH_HCR_EL2_TALL0 | ICH_HCR_EL2_TALL1 | ICH_HCR_EL2_TSEI |
ICH_HCR_EL2_TDIR | ICH_HCR_EL2_EOICOUNT_MASK;
cs->ich_hcr_el2 = value;
gicv3_cpuif_virt_update(cs);
}
static uint64_t ich_vmcr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value = cs->ich_vmcr_el2;
trace_gicv3_ich_vmcr_read(gicv3_redist_affid(cs), value);
return value;
}
static void ich_vmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
trace_gicv3_ich_vmcr_write(gicv3_redist_affid(cs), value);
value &= ICH_VMCR_EL2_VENG0 | ICH_VMCR_EL2_VENG1 | ICH_VMCR_EL2_VCBPR |
ICH_VMCR_EL2_VEOIM | ICH_VMCR_EL2_VBPR1_MASK |
ICH_VMCR_EL2_VBPR0_MASK | ICH_VMCR_EL2_VPMR_MASK;
value |= ICH_VMCR_EL2_VFIQEN;
cs->ich_vmcr_el2 = value;
/* Enforce "writing BPRs to less than minimum sets them to the minimum"
* by reading and writing back the fields.
*/
write_vbpr(cs, GICV3_G0, read_vbpr(cs, GICV3_G0));
write_vbpr(cs, GICV3_G1, read_vbpr(cs, GICV3_G1));
gicv3_cpuif_virt_update(cs);
}
static uint64_t ich_lr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 | ((ri->crm & 1) << 3);
uint64_t value;
/* This read function handles all of:
* 64-bit reads of the whole LR
* 32-bit reads of the low half of the LR
* 32-bit reads of the high half of the LR
*/
if (ri->state == ARM_CP_STATE_AA32) {
if (ri->crm >= 14) {
value = extract64(cs->ich_lr_el2[regno], 32, 32);
trace_gicv3_ich_lrc_read(regno, gicv3_redist_affid(cs), value);
} else {
value = extract64(cs->ich_lr_el2[regno], 0, 32);
trace_gicv3_ich_lr32_read(regno, gicv3_redist_affid(cs), value);
}
} else {
value = cs->ich_lr_el2[regno];
trace_gicv3_ich_lr_read(regno, gicv3_redist_affid(cs), value);
}
return value;
}
static void ich_lr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
GICv3CPUState *cs = icc_cs_from_env(env);
int regno = ri->opc2 | ((ri->crm & 1) << 3);
/* This write function handles all of:
* 64-bit writes to the whole LR
* 32-bit writes to the low half of the LR
* 32-bit writes to the high half of the LR
*/
if (ri->state == ARM_CP_STATE_AA32) {
if (ri->crm >= 14) {
trace_gicv3_ich_lrc_write(regno, gicv3_redist_affid(cs), value);
value = deposit64(cs->ich_lr_el2[regno], 32, 32, value);
} else {
trace_gicv3_ich_lr32_write(regno, gicv3_redist_affid(cs), value);
value = deposit64(cs->ich_lr_el2[regno], 0, 32, value);
}
} else {
trace_gicv3_ich_lr_write(regno, gicv3_redist_affid(cs), value);
}
/* Enforce RES0 bits in priority field */
if (cs->vpribits < 8) {
value = deposit64(value, ICH_LR_EL2_PRIORITY_SHIFT,
8 - cs->vpribits, 0);
}
cs->ich_lr_el2[regno] = value;
gicv3_cpuif_virt_update(cs);
}
static uint64_t ich_vtr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value;
value = ((cs->num_list_regs - 1) << ICH_VTR_EL2_LISTREGS_SHIFT)
| ICH_VTR_EL2_TDS | ICH_VTR_EL2_NV4 | ICH_VTR_EL2_A3V
| (1 << ICH_VTR_EL2_IDBITS_SHIFT)
| ((cs->vprebits - 1) << ICH_VTR_EL2_PREBITS_SHIFT)
| ((cs->vpribits - 1) << ICH_VTR_EL2_PRIBITS_SHIFT);
trace_gicv3_ich_vtr_read(gicv3_redist_affid(cs), value);
return value;
}
static uint64_t ich_misr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value = maintenance_interrupt_state(cs);
trace_gicv3_ich_misr_read(gicv3_redist_affid(cs), value);
return value;
}
static uint64_t ich_eisr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value = eoi_maintenance_interrupt_state(cs, NULL);
trace_gicv3_ich_eisr_read(gicv3_redist_affid(cs), value);
return value;
}
static uint64_t ich_elrsr_read(CPUARMState *env, const ARMCPRegInfo *ri)
{
GICv3CPUState *cs = icc_cs_from_env(env);
uint64_t value = 0;
int i;
for (i = 0; i < cs->num_list_regs; i++) {
uint64_t lr = cs->ich_lr_el2[i];
if ((lr & ICH_LR_EL2_STATE_MASK) == 0 &&
((lr & ICH_LR_EL2_HW) != 0 || (lr & ICH_LR_EL2_EOI) == 0)) {
value |= (1 << i);
}
}
trace_gicv3_ich_elrsr_read(gicv3_redist_affid(cs), value);
return value;
}
static const ARMCPRegInfo gicv3_cpuif_hcr_reginfo[] = {
{ .name = "ICH_AP0R0_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 0,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_ap_read,
.writefn = ich_ap_write,
},
{ .name = "ICH_AP1R0_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 0,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_ap_read,
.writefn = ich_ap_write,
},
{ .name = "ICH_HCR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 0,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_hcr_read,
.writefn = ich_hcr_write,
},
{ .name = "ICH_VTR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 1,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_R,
.readfn = ich_vtr_read,
},
{ .name = "ICH_MISR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 2,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_R,
.readfn = ich_misr_read,
},
{ .name = "ICH_EISR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 3,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_R,
.readfn = ich_eisr_read,
},
{ .name = "ICH_ELRSR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 5,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_R,
.readfn = ich_elrsr_read,
},
{ .name = "ICH_VMCR_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 11, .opc2 = 7,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_vmcr_read,
.writefn = ich_vmcr_write,
},
REGINFO_SENTINEL
};
static const ARMCPRegInfo gicv3_cpuif_ich_apxr1_reginfo[] = {
{ .name = "ICH_AP0R1_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 1,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_ap_read,
.writefn = ich_ap_write,
},
{ .name = "ICH_AP1R1_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 1,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_ap_read,
.writefn = ich_ap_write,
},
REGINFO_SENTINEL
};
static const ARMCPRegInfo gicv3_cpuif_ich_apxr23_reginfo[] = {
{ .name = "ICH_AP0R2_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 2,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_ap_read,
.writefn = ich_ap_write,
},
{ .name = "ICH_AP0R3_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 8, .opc2 = 3,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_ap_read,
.writefn = ich_ap_write,
},
{ .name = "ICH_AP1R2_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 2,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_ap_read,
.writefn = ich_ap_write,
},
{ .name = "ICH_AP1R3_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12, .crm = 9, .opc2 = 3,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_ap_read,
.writefn = ich_ap_write,
},
REGINFO_SENTINEL
};
static void gicv3_cpuif_el_change_hook(ARMCPU *cpu, void *opaque)
{
GICv3CPUState *cs = opaque;
gicv3_cpuif_update(cs);
}
void gicv3_init_cpuif(GICv3State *s)
{
/* Called from the GICv3 realize function; register our system
* registers with the CPU
*/
int i;
for (i = 0; i < s->num_cpu; i++) {
ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i));
GICv3CPUState *cs = &s->cpu[i];
/* Note that we can't just use the GICv3CPUState as an opaque pointer
* in define_arm_cp_regs_with_opaque(), because when we're called back
* it might be with code translated by CPU 0 but run by CPU 1, in
* which case we'd get the wrong value.
* So instead we define the regs with no ri->opaque info, and
* get back to the GICv3CPUState from the CPUARMState.
*/
define_arm_cp_regs(cpu, gicv3_cpuif_reginfo);
if (arm_feature(&cpu->env, ARM_FEATURE_EL2)
&& cpu->gic_num_lrs) {
int j;
cs->num_list_regs = cpu->gic_num_lrs;
cs->vpribits = cpu->gic_vpribits;
cs->vprebits = cpu->gic_vprebits;
/* Check against architectural constraints: getting these
* wrong would be a bug in the CPU code defining these,
* and the implementation relies on them holding.
*/
g_assert(cs->vprebits <= cs->vpribits);
g_assert(cs->vprebits >= 5 && cs->vprebits <= 7);
g_assert(cs->vpribits >= 5 && cs->vpribits <= 8);
define_arm_cp_regs(cpu, gicv3_cpuif_hcr_reginfo);
for (j = 0; j < cs->num_list_regs; j++) {
/* Note that the AArch64 LRs are 64-bit; the AArch32 LRs
* are split into two cp15 regs, LR (the low part, with the
* same encoding as the AArch64 LR) and LRC (the high part).
*/
ARMCPRegInfo lr_regset[] = {
{ .name = "ICH_LRn_EL2", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .opc1 = 4, .crn = 12,
.crm = 12 + (j >> 3), .opc2 = j & 7,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_lr_read,
.writefn = ich_lr_write,
},
{ .name = "ICH_LRCn_EL2", .state = ARM_CP_STATE_AA32,
.cp = 15, .opc1 = 4, .crn = 12,
.crm = 14 + (j >> 3), .opc2 = j & 7,
.type = ARM_CP_IO | ARM_CP_NO_RAW,
.access = PL2_RW,
.readfn = ich_lr_read,
.writefn = ich_lr_write,
},
REGINFO_SENTINEL
};
define_arm_cp_regs(cpu, lr_regset);
}
if (cs->vprebits >= 6) {
define_arm_cp_regs(cpu, gicv3_cpuif_ich_apxr1_reginfo);
}
if (cs->vprebits == 7) {
define_arm_cp_regs(cpu, gicv3_cpuif_ich_apxr23_reginfo);
}
}
arm_register_el_change_hook(cpu, gicv3_cpuif_el_change_hook, cs);
}
}
Reference in New Issue View Git Blame Copy Permalink