qemu-e2k/hw
Daniel P. Berrangé de72c4b7cd edid: set default resolution to 1280x800 (WXGA)
Currently QEMU defaults to a resolution of 1024x768 when exposing EDID
info to the guest OS. The EDID default info is important as this will
influence what resolution many guest OS will configure the screen with
on boot. It can also potentially influence what resolution the firmware
will configure the screen with, though until very recently EDK2 would
not handle EDID info.

One important thing to bear in mind is that the default graphics card
driver provided by Windows will leave the display set to whatever
resolution was enabled by the firmware on boot. Even if sufficient
VRAM is available, the resolution can't be changed without installing
new drivers. IOW, the default resolution choice is quite important
for usability of Windows.

Modern real world monitor hardware for desktop/laptop has supported
resolutions higher than 1024x768 for a long time now, perhaps as long
as 15+ years. There are quite a wide variety of native resolutions in
use today, however, and in wide screen form factors the height may not
be all that tall.

None the less, it is considered that there is scope for making the
QEMU default resolution slightly larger.

In considering what possible new default could be suitable, choices
considered were 1280x720 (720p), 1280x800 (WXGA) and 1280x1024 (SXGA).

In many ways, vertical space is the most important, and so 720p was
discarded due to loosing vertical space, despite being 25% wider.

The SXGA resolution would be good, but when taking into account
window titlebars/toolbars and window manager desktop UI, this might
be a little too tall for some users to fit the guest on their physical
montior.

This patch thus suggests a modest change to 1280x800 (WXGA). This
only consumes 1 MB per colour channel, allowing double buffered
framebuffer in 8 MB of VRAM. Width wise this is 25% larger than
QEMU's current default, but height wise this only adds 5%, so the
difference isn't massive on the QEMU side.

Overall there doesn't appear to be a compelling reason to stick
with 1024x768 resolution.

Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20211129140508.1745130-1-berrange@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-01-13 10:59:16 +01:00
..
9pfs
acpi acpihp: simplify acpi_pcihp_disable_root_bus 2022-01-07 19:30:13 -05:00
adc
alpha
arm virtio,pci,pc: features,fixes,cleanups 2022-01-07 17:24:24 -08:00
audio hw/audio/intel-hda: fix stream reset 2022-01-13 10:47:52 +01:00
avr hw/avr: Realize AVRCPU qdev object using qdev_realize() 2021-12-17 10:43:24 +01:00
block hw/vhost-user-blk: turn on VIRTIO_BLK_F_SIZE_MAX feature for virtio blk device 2022-01-07 05:19:55 -05:00
char Fix STM32F2XX USART data register readout 2021-12-15 10:11:34 +00:00
core hw: Add compat machines for 7.0 2022-01-05 09:06:36 +01:00
cpu
cris
display edid: set default resolution to 1280x800 (WXGA) 2022-01-13 10:59:16 +01:00
dma hw/dma: sifive_pdma: permit 4/8-byte access size of PDMA registers 2022-01-08 15:46:09 +10:00
gpio
hppa
hyperv dma: Let dma_memory_map() take MemTxAttrs argument 2021-12-30 17:16:32 +01:00
i2c
i386 acpi: tpm: Add missing device identification objects 2022-01-07 19:30:13 -05:00
ide dma: Let dma_buf_read() take MemTxAttrs argument 2021-12-31 01:05:27 +01:00
input
intc hw/intc: sifive_plic: Cleanup remaining functions 2022-01-08 15:46:09 +10:00
ipack
ipmi
isa
m68k q800: fix segfault with invalid MacROM 2022-01-09 12:03:21 +01:00
mem hw/mem/pc-dimm: Restrict NUMA-specific code to NUMA machines 2021-11-11 03:13:05 -05:00
microblaze hw/microblaze: Replace drive_get_next() by drive_get() 2021-12-15 08:38:16 +01:00
mips hw/mips/jazz: Inline vga_mmio_init() and remove it 2022-01-13 10:58:54 +01:00
misc dma: Let dma_memory_read/write() take MemTxAttrs argument 2021-12-30 17:16:32 +01:00
net Revert "virtio: introduce macro IRTIO_CONFIG_IRQ_IDX" 2022-01-10 16:02:54 -05:00
nios2
nubus
nvme dma: Let dma_buf_read() take MemTxAttrs argument 2021-12-31 01:05:27 +01:00
nvram dma: Let st*_dma() take MemTxAttrs argument 2021-12-31 01:05:27 +01:00
openrisc
pci pcie_aer: Don't trigger a LSI if none are defined 2022-01-07 05:19:55 -05:00
pci-bridge
pci-host pnv_phb4.c: do not set 'root-bus' as bus name 2022-01-04 07:55:34 +01:00
pcmcia
ppc hw: Add compat machines for 7.0 2022-01-05 09:06:36 +01:00
rdma
remote
riscv hw/riscv: Use error_fatal for SoC realisation 2022-01-08 15:46:09 +10:00
rtc hw/rtc/pl031: Send RTC_CHANGE QMP event 2021-11-15 18:53:00 +00:00
rx
s390x hw: Add compat machines for 7.0 2022-01-05 09:06:36 +01:00
scsi hw/scsi/vhost-scsi: don't double close vhostfd on error 2022-01-07 19:30:13 -05:00
sd hw/sd: Add SDHC support for SD card SPI-mode 2022-01-04 08:50:28 +01:00
sensor
sh4
smbios smbios: Rename SMBIOS_ENTRY_POINT_* enums 2022-01-07 05:19:55 -05:00
sparc
sparc64 hw: Replace trivial drive_get_next() by drive_get() 2021-12-15 08:38:16 +01:00
ssi
timer
tpm
tricore
usb uas: add missing return 2022-01-13 10:58:05 +01:00
vfio vfio: Fix memory leak of hostwin 2021-11-17 11:25:55 -07:00
virtio Revert "virtio: introduce macro IRTIO_CONFIG_IRQ_IDX" 2022-01-10 16:02:54 -05:00
watchdog
xen
xenpv
xtensa
Kconfig
meson.build