qemu-e2k/hw/arm/armv7m.c
Alistair Francis 8b47b7da29 target_arm: Parameterise the irq lines for armv7m_init
This patch allows the board to specifiy the number of NVIC interrupt
lines when using armv7m_init.

Signed-off-by: Alistair Francis <alistair23@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 5a0b0fcc778df0340899f488053acc9493679e03.1422077994.git.alistair23@gmail.com
[PMM: removed stale FIXME comment]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-05 13:37:21 +00:00

267 lines
6.7 KiB
C

/*
* ARMV7M System emulation.
*
* Copyright (c) 2006-2007 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GPL.
*/
#include "hw/sysbus.h"
#include "hw/arm/arm.h"
#include "hw/loader.h"
#include "elf.h"
#include "sysemu/qtest.h"
#include "qemu/error-report.h"
/* Bitbanded IO. Each word corresponds to a single bit. */
/* Get the byte address of the real memory for a bitband access. */
static inline uint32_t bitband_addr(void * opaque, uint32_t addr)
{
uint32_t res;
res = *(uint32_t *)opaque;
res |= (addr & 0x1ffffff) >> 5;
return res;
}
static uint32_t bitband_readb(void *opaque, hwaddr offset)
{
uint8_t v;
cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1);
return (v & (1 << ((offset >> 2) & 7))) != 0;
}
static void bitband_writeb(void *opaque, hwaddr offset,
uint32_t value)
{
uint32_t addr;
uint8_t mask;
uint8_t v;
addr = bitband_addr(opaque, offset);
mask = (1 << ((offset >> 2) & 7));
cpu_physical_memory_read(addr, &v, 1);
if (value & 1)
v |= mask;
else
v &= ~mask;
cpu_physical_memory_write(addr, &v, 1);
}
static uint32_t bitband_readw(void *opaque, hwaddr offset)
{
uint32_t addr;
uint16_t mask;
uint16_t v;
addr = bitband_addr(opaque, offset) & ~1;
mask = (1 << ((offset >> 2) & 15));
mask = tswap16(mask);
cpu_physical_memory_read(addr, &v, 2);
return (v & mask) != 0;
}
static void bitband_writew(void *opaque, hwaddr offset,
uint32_t value)
{
uint32_t addr;
uint16_t mask;
uint16_t v;
addr = bitband_addr(opaque, offset) & ~1;
mask = (1 << ((offset >> 2) & 15));
mask = tswap16(mask);
cpu_physical_memory_read(addr, &v, 2);
if (value & 1)
v |= mask;
else
v &= ~mask;
cpu_physical_memory_write(addr, &v, 2);
}
static uint32_t bitband_readl(void *opaque, hwaddr offset)
{
uint32_t addr;
uint32_t mask;
uint32_t v;
addr = bitband_addr(opaque, offset) & ~3;
mask = (1 << ((offset >> 2) & 31));
mask = tswap32(mask);
cpu_physical_memory_read(addr, &v, 4);
return (v & mask) != 0;
}
static void bitband_writel(void *opaque, hwaddr offset,
uint32_t value)
{
uint32_t addr;
uint32_t mask;
uint32_t v;
addr = bitband_addr(opaque, offset) & ~3;
mask = (1 << ((offset >> 2) & 31));
mask = tswap32(mask);
cpu_physical_memory_read(addr, &v, 4);
if (value & 1)
v |= mask;
else
v &= ~mask;
cpu_physical_memory_write(addr, &v, 4);
}
static const MemoryRegionOps bitband_ops = {
.old_mmio = {
.read = { bitband_readb, bitband_readw, bitband_readl, },
.write = { bitband_writeb, bitband_writew, bitband_writel, },
},
.endianness = DEVICE_NATIVE_ENDIAN,
};
#define TYPE_BITBAND "ARM,bitband-memory"
#define BITBAND(obj) OBJECT_CHECK(BitBandState, (obj), TYPE_BITBAND)
typedef struct {
/*< private >*/
SysBusDevice parent_obj;
/*< public >*/
MemoryRegion iomem;
uint32_t base;
} BitBandState;
static int bitband_init(SysBusDevice *dev)
{
BitBandState *s = BITBAND(dev);
memory_region_init_io(&s->iomem, OBJECT(s), &bitband_ops, &s->base,
"bitband", 0x02000000);
sysbus_init_mmio(dev, &s->iomem);
return 0;
}
static void armv7m_bitband_init(void)
{
DeviceState *dev;
dev = qdev_create(NULL, TYPE_BITBAND);
qdev_prop_set_uint32(dev, "base", 0x20000000);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x22000000);
dev = qdev_create(NULL, TYPE_BITBAND);
qdev_prop_set_uint32(dev, "base", 0x40000000);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0x42000000);
}
/* Board init. */
static void armv7m_reset(void *opaque)
{
ARMCPU *cpu = opaque;
cpu_reset(CPU(cpu));
}
/* Init CPU and memory for a v7-M based board.
mem_size is in bytes.
Returns the NVIC array. */
qemu_irq *armv7m_init(MemoryRegion *system_memory, int mem_size, int num_irq,
const char *kernel_filename, const char *cpu_model)
{
ARMCPU *cpu;
CPUARMState *env;
DeviceState *nvic;
qemu_irq *pic = g_new(qemu_irq, num_irq);
int image_size;
uint64_t entry;
uint64_t lowaddr;
int i;
int big_endian;
MemoryRegion *hack = g_new(MemoryRegion, 1);
if (cpu_model == NULL) {
cpu_model = "cortex-m3";
}
cpu = cpu_arm_init(cpu_model);
if (cpu == NULL) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
env = &cpu->env;
armv7m_bitband_init();
nvic = qdev_create(NULL, "armv7m_nvic");
qdev_prop_set_uint32(nvic, "num-irq", num_irq);
env->nvic = nvic;
qdev_init_nofail(nvic);
sysbus_connect_irq(SYS_BUS_DEVICE(nvic), 0,
qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ));
for (i = 0; i < num_irq; i++) {
pic[i] = qdev_get_gpio_in(nvic, i);
}
#ifdef TARGET_WORDS_BIGENDIAN
big_endian = 1;
#else
big_endian = 0;
#endif
if (!kernel_filename && !qtest_enabled()) {
fprintf(stderr, "Guest image must be specified (using -kernel)\n");
exit(1);
}
if (kernel_filename) {
image_size = load_elf(kernel_filename, NULL, NULL, &entry, &lowaddr,
NULL, big_endian, ELF_MACHINE, 1);
if (image_size < 0) {
image_size = load_image_targphys(kernel_filename, 0, mem_size);
lowaddr = 0;
}
if (image_size < 0) {
error_report("Could not load kernel '%s'", kernel_filename);
exit(1);
}
}
/* Hack to map an additional page of ram at the top of the address
space. This stops qemu complaining about executing code outside RAM
when returning from an exception. */
memory_region_init_ram(hack, NULL, "armv7m.hack", 0x1000, &error_abort);
vmstate_register_ram_global(hack);
memory_region_add_subregion(system_memory, 0xfffff000, hack);
qemu_register_reset(armv7m_reset, cpu);
return pic;
}
static Property bitband_properties[] = {
DEFINE_PROP_UINT32("base", BitBandState, base, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void bitband_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
k->init = bitband_init;
dc->props = bitband_properties;
}
static const TypeInfo bitband_info = {
.name = TYPE_BITBAND,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(BitBandState),
.class_init = bitband_class_init,
};
static void armv7m_register_types(void)
{
type_register_static(&bitband_info);
}
type_init(armv7m_register_types)