a5d2f6f877
RDMA MAD kernel module (ibcm) disallow more than one MAD-agent for a given MAD class. This does not go hand-by-hand with qemu pvrdma device's requirements where each VM is MAD agent. Fix it by adding implementation of RDMA MAD multiplexer service which on one hand register as a sole MAD agent with the kernel module and on the other hand gives service to more than one VM. Design Overview: Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> ---------------- A server process is registered to UMAD framework (for this to work the rdma_cm kernel module needs to be unloaded) and creates a unix socket to listen to incoming request from clients. A client process (such as QEMU) connects to this unix socket and registers with its own GID. TX: ---- When client needs to send rdma_cm MAD message it construct it the same way as without this multiplexer, i.e. creates a umad packet but this time it writes its content to the socket instead of calling umad_send(). The server, upon receiving such a message fetch local_comm_id from it so a context for this session can be maintain and relay the message to UMAD layer by calling umad_send(). RX: ---- The server creates a worker thread to process incoming rdma_cm MAD messages. When an incoming message arrived (umad_recv()) the server, depending on the message type (attr_id) looks for target client by either searching in gid->fd table or in local_comm_id->fd table. With the extracted fd the server relays to incoming message to the client. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
993 lines
34 KiB
Makefile
993 lines
34 KiB
Makefile
# Makefile for QEMU.
|
|
|
|
# Always point to the root of the build tree (needs GNU make).
|
|
BUILD_DIR=$(CURDIR)
|
|
|
|
# Before including a proper config-host.mak, assume we are in the source tree
|
|
SRC_PATH=.
|
|
|
|
UNCHECKED_GOALS := %clean TAGS cscope ctags dist \
|
|
html info pdf txt \
|
|
help check-help print-% \
|
|
docker docker-% vm-test vm-build-%
|
|
|
|
print-%:
|
|
@echo '$*=$($*)'
|
|
|
|
# All following code might depend on configuration variables
|
|
ifneq ($(wildcard config-host.mak),)
|
|
# Put the all: rule here so that config-host.mak can contain dependencies.
|
|
all:
|
|
include config-host.mak
|
|
|
|
git-submodule-update:
|
|
|
|
.PHONY: git-submodule-update
|
|
|
|
git_module_status := $(shell \
|
|
cd '$(SRC_PATH)' && \
|
|
GIT="$(GIT)" ./scripts/git-submodule.sh status $(GIT_SUBMODULES); \
|
|
echo $$?; \
|
|
)
|
|
|
|
ifeq (1,$(git_module_status))
|
|
ifeq (no,$(GIT_UPDATE))
|
|
git-submodule-update:
|
|
$(call quiet-command, \
|
|
echo && \
|
|
echo "GIT submodule checkout is out of date. Please run" && \
|
|
echo " scripts/git-submodule.sh update $(GIT_SUBMODULES)" && \
|
|
echo "from the source directory checkout $(SRC_PATH)" && \
|
|
echo && \
|
|
exit 1)
|
|
else
|
|
git-submodule-update:
|
|
$(call quiet-command, \
|
|
(cd $(SRC_PATH) && GIT="$(GIT)" ./scripts/git-submodule.sh update $(GIT_SUBMODULES)), \
|
|
"GIT","$(GIT_SUBMODULES)")
|
|
endif
|
|
endif
|
|
|
|
.git-submodule-status: git-submodule-update config-host.mak
|
|
|
|
# Check that we're not trying to do an out-of-tree build from
|
|
# a tree that's been used for an in-tree build.
|
|
ifneq ($(realpath $(SRC_PATH)),$(realpath .))
|
|
ifneq ($(wildcard $(SRC_PATH)/config-host.mak),)
|
|
$(error This is an out of tree build but your source tree ($(SRC_PATH)) \
|
|
seems to have been used for an in-tree build. You can fix this by running \
|
|
"$(MAKE) distclean && rm -rf *-linux-user *-softmmu" in your source tree)
|
|
endif
|
|
endif
|
|
|
|
CONFIG_SOFTMMU := $(if $(filter %-softmmu,$(TARGET_DIRS)),y)
|
|
CONFIG_USER_ONLY := $(if $(filter %-user,$(TARGET_DIRS)),y)
|
|
CONFIG_XEN := $(CONFIG_XEN_BACKEND)
|
|
CONFIG_ALL=y
|
|
-include config-all-devices.mak
|
|
-include config-all-disas.mak
|
|
|
|
config-host.mak: $(SRC_PATH)/configure $(SRC_PATH)/pc-bios $(SRC_PATH)/VERSION
|
|
@echo $@ is out-of-date, running configure
|
|
@# TODO: The next lines include code which supports a smooth
|
|
@# transition from old configurations without config.status.
|
|
@# This code can be removed after QEMU 1.7.
|
|
@if test -x config.status; then \
|
|
./config.status; \
|
|
else \
|
|
sed -n "/.*Configured with/s/[^:]*: //p" $@ | sh; \
|
|
fi
|
|
else
|
|
config-host.mak:
|
|
ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
|
|
@echo "Please call configure before running make!"
|
|
@exit 1
|
|
endif
|
|
endif
|
|
|
|
include $(SRC_PATH)/rules.mak
|
|
|
|
GENERATED_FILES = qemu-version.h config-host.h qemu-options.def
|
|
|
|
#see Makefile.objs for the definition of QAPI_MODULES
|
|
GENERATED_QAPI_FILES = qapi/qapi-builtin-types.h qapi/qapi-builtin-types.c
|
|
GENERATED_QAPI_FILES += qapi/qapi-types.h qapi/qapi-types.c
|
|
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-types-%.h)
|
|
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-types-%.c)
|
|
GENERATED_QAPI_FILES += qapi/qapi-builtin-visit.h qapi/qapi-builtin-visit.c
|
|
GENERATED_QAPI_FILES += qapi/qapi-visit.h qapi/qapi-visit.c
|
|
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-visit-%.h)
|
|
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-visit-%.c)
|
|
GENERATED_QAPI_FILES += qapi/qapi-commands.h qapi/qapi-commands.c
|
|
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-commands-%.h)
|
|
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-commands-%.c)
|
|
GENERATED_QAPI_FILES += qapi/qapi-events.h qapi/qapi-events.c
|
|
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-events-%.h)
|
|
GENERATED_QAPI_FILES += $(QAPI_MODULES:%=qapi/qapi-events-%.c)
|
|
GENERATED_QAPI_FILES += qapi/qapi-introspect.c qapi/qapi-introspect.h
|
|
GENERATED_QAPI_FILES += qapi/qapi-doc.texi
|
|
|
|
GENERATED_FILES += $(GENERATED_QAPI_FILES)
|
|
|
|
GENERATED_FILES += trace/generated-tcg-tracers.h
|
|
|
|
GENERATED_FILES += trace/generated-helpers-wrappers.h
|
|
GENERATED_FILES += trace/generated-helpers.h
|
|
GENERATED_FILES += trace/generated-helpers.c
|
|
|
|
ifdef CONFIG_TRACE_UST
|
|
GENERATED_FILES += trace-ust-all.h
|
|
GENERATED_FILES += trace-ust-all.c
|
|
endif
|
|
|
|
GENERATED_FILES += module_block.h
|
|
|
|
TRACE_HEADERS = trace-root.h $(trace-events-subdirs:%=%/trace.h)
|
|
TRACE_SOURCES = trace-root.c $(trace-events-subdirs:%=%/trace.c)
|
|
TRACE_DTRACE =
|
|
ifdef CONFIG_TRACE_DTRACE
|
|
TRACE_HEADERS += trace-dtrace-root.h $(trace-events-subdirs:%=%/trace-dtrace.h)
|
|
TRACE_DTRACE += trace-dtrace-root.dtrace $(trace-events-subdirs:%=%/trace-dtrace.dtrace)
|
|
endif
|
|
ifdef CONFIG_TRACE_UST
|
|
TRACE_HEADERS += trace-ust-root.h $(trace-events-subdirs:%=%/trace-ust.h)
|
|
endif
|
|
|
|
GENERATED_FILES += $(TRACE_HEADERS)
|
|
GENERATED_FILES += $(TRACE_SOURCES)
|
|
GENERATED_FILES += $(BUILD_DIR)/trace-events-all
|
|
GENERATED_FILES += .git-submodule-status
|
|
|
|
trace-group-name = $(shell dirname $1 | sed -e 's/[^a-zA-Z0-9]/_/g')
|
|
|
|
tracetool-y = $(SRC_PATH)/scripts/tracetool.py
|
|
tracetool-y += $(shell find $(SRC_PATH)/scripts/tracetool -name "*.py")
|
|
|
|
%/trace.h: %/trace.h-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
%/trace.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=$(call trace-group-name,$@) \
|
|
--format=h \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$< > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
%/trace.c: %/trace.c-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
%/trace.c-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=$(call trace-group-name,$@) \
|
|
--format=c \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$< > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
%/trace-ust.h: %/trace-ust.h-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
%/trace-ust.h-timestamp: $(SRC_PATH)/%/trace-events $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=$(call trace-group-name,$@) \
|
|
--format=ust-events-h \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$< > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
%/trace-dtrace.dtrace: %/trace-dtrace.dtrace-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
%/trace-dtrace.dtrace-timestamp: $(SRC_PATH)/%/trace-events $(BUILD_DIR)/config-host.mak $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=$(call trace-group-name,$@) \
|
|
--format=d \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$< > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
%/trace-dtrace.h: %/trace-dtrace.dtrace $(tracetool-y)
|
|
$(call quiet-command,dtrace -o $@ -h -s $<, "GEN","$@")
|
|
|
|
%/trace-dtrace.o: %/trace-dtrace.dtrace $(tracetool-y)
|
|
|
|
|
|
trace-root.h: trace-root.h-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
trace-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=root \
|
|
--format=h \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$< > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
trace-root.c: trace-root.c-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
trace-root.c-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=root \
|
|
--format=c \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$< > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
trace-ust-root.h: trace-ust-root.h-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
trace-ust-root.h-timestamp: $(SRC_PATH)/trace-events $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=root \
|
|
--format=ust-events-h \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$< > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
trace-ust-all.h: trace-ust-all.h-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
trace-ust-all.h-timestamp: $(trace-events-files) $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=all \
|
|
--format=ust-events-h \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$(trace-events-files) > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
trace-ust-all.c: trace-ust-all.c-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
trace-ust-all.c-timestamp: $(trace-events-files) $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=all \
|
|
--format=ust-events-c \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$(trace-events-files) > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
trace-dtrace-root.dtrace: trace-dtrace-root.dtrace-timestamp
|
|
@cmp $< $@ >/dev/null 2>&1 || cp $< $@
|
|
trace-dtrace-root.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak $(tracetool-y)
|
|
$(call quiet-command,$(TRACETOOL) \
|
|
--group=root \
|
|
--format=d \
|
|
--backends=$(TRACE_BACKENDS) \
|
|
$< > $@,"GEN","$(@:%-timestamp=%)")
|
|
|
|
trace-dtrace-root.h: trace-dtrace-root.dtrace
|
|
$(call quiet-command,dtrace -o $@ -h -s $<, "GEN","$@")
|
|
|
|
trace-dtrace-root.o: trace-dtrace-root.dtrace
|
|
|
|
KEYCODEMAP_GEN = $(SRC_PATH)/ui/keycodemapdb/tools/keymap-gen
|
|
KEYCODEMAP_CSV = $(SRC_PATH)/ui/keycodemapdb/data/keymaps.csv
|
|
|
|
KEYCODEMAP_FILES = \
|
|
ui/input-keymap-atset1-to-qcode.c \
|
|
ui/input-keymap-linux-to-qcode.c \
|
|
ui/input-keymap-qcode-to-atset1.c \
|
|
ui/input-keymap-qcode-to-atset2.c \
|
|
ui/input-keymap-qcode-to-atset3.c \
|
|
ui/input-keymap-qcode-to-linux.c \
|
|
ui/input-keymap-qcode-to-qnum.c \
|
|
ui/input-keymap-qcode-to-sun.c \
|
|
ui/input-keymap-qnum-to-qcode.c \
|
|
ui/input-keymap-usb-to-qcode.c \
|
|
ui/input-keymap-win32-to-qcode.c \
|
|
ui/input-keymap-x11-to-qcode.c \
|
|
ui/input-keymap-xorgevdev-to-qcode.c \
|
|
ui/input-keymap-xorgkbd-to-qcode.c \
|
|
ui/input-keymap-xorgxquartz-to-qcode.c \
|
|
ui/input-keymap-xorgxwin-to-qcode.c \
|
|
ui/input-keymap-osx-to-qcode.c \
|
|
$(NULL)
|
|
|
|
GENERATED_FILES += $(KEYCODEMAP_FILES)
|
|
|
|
ui/input-keymap-%.c: $(KEYCODEMAP_GEN) $(KEYCODEMAP_CSV) $(SRC_PATH)/ui/Makefile.objs
|
|
$(call quiet-command,\
|
|
stem=$* && src=$${stem%-to-*} dst=$${stem#*-to-} && \
|
|
test -e $(KEYCODEMAP_GEN) && \
|
|
$(PYTHON) $(KEYCODEMAP_GEN) \
|
|
--lang glib2 \
|
|
--varname qemu_input_map_$${src}_to_$${dst} \
|
|
code-map $(KEYCODEMAP_CSV) $${src} $${dst} \
|
|
> $@ || rm -f $@, "GEN", "$@")
|
|
|
|
$(KEYCODEMAP_GEN): .git-submodule-status
|
|
$(KEYCODEMAP_CSV): .git-submodule-status
|
|
|
|
# Don't try to regenerate Makefile or configure
|
|
# We don't generate any of them
|
|
Makefile: ;
|
|
configure: ;
|
|
|
|
.PHONY: all clean cscope distclean html info install install-doc \
|
|
pdf txt recurse-all dist msi FORCE
|
|
|
|
$(call set-vpath, $(SRC_PATH))
|
|
|
|
LIBS+=-lz $(LIBS_TOOLS)
|
|
|
|
HELPERS-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_LINUX)) = qemu-bridge-helper$(EXESUF)
|
|
|
|
ifdef BUILD_DOCS
|
|
DOCS=qemu-doc.html qemu-doc.txt qemu.1 qemu-img.1 qemu-nbd.8 qemu-ga.8
|
|
DOCS+=docs/interop/qemu-qmp-ref.html docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7
|
|
DOCS+=docs/interop/qemu-ga-ref.html docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7
|
|
DOCS+=docs/qemu-block-drivers.7
|
|
DOCS+=docs/qemu-cpu-models.7
|
|
ifdef CONFIG_VIRTFS
|
|
DOCS+=fsdev/virtfs-proxy-helper.1
|
|
endif
|
|
else
|
|
DOCS=
|
|
endif
|
|
|
|
SUBDIR_MAKEFLAGS=$(if $(V),,--no-print-directory --quiet) BUILD_DIR=$(BUILD_DIR)
|
|
SUBDIR_DEVICES_MAK=$(patsubst %, %/config-devices.mak, $(TARGET_DIRS))
|
|
SUBDIR_DEVICES_MAK_DEP=$(patsubst %, %-config-devices.mak.d, $(TARGET_DIRS))
|
|
|
|
ifeq ($(SUBDIR_DEVICES_MAK),)
|
|
config-all-devices.mak:
|
|
$(call quiet-command,echo '# no devices' > $@,"GEN","$@")
|
|
else
|
|
config-all-devices.mak: $(SUBDIR_DEVICES_MAK)
|
|
$(call quiet-command, sed -n \
|
|
's|^\([^=]*\)=\(.*\)$$|\1:=$$(findstring y,$$(\1)\2)|p' \
|
|
$(SUBDIR_DEVICES_MAK) | sort -u > $@, \
|
|
"GEN","$@")
|
|
endif
|
|
|
|
-include $(SUBDIR_DEVICES_MAK_DEP)
|
|
|
|
%/config-devices.mak: default-configs/%.mak $(SRC_PATH)/scripts/make_device_config.sh
|
|
$(call quiet-command, \
|
|
$(SHELL) $(SRC_PATH)/scripts/make_device_config.sh $< $*-config-devices.mak.d $@ > $@.tmp,"GEN","$@.tmp")
|
|
$(call quiet-command, if test -f $@; then \
|
|
if cmp -s $@.old $@; then \
|
|
mv $@.tmp $@; \
|
|
cp -p $@ $@.old; \
|
|
else \
|
|
if test -f $@.old; then \
|
|
echo "WARNING: $@ (user modified) out of date.";\
|
|
else \
|
|
echo "WARNING: $@ out of date.";\
|
|
fi; \
|
|
echo "Run \"$(MAKE) defconfig\" to regenerate."; \
|
|
rm $@.tmp; \
|
|
fi; \
|
|
else \
|
|
mv $@.tmp $@; \
|
|
cp -p $@ $@.old; \
|
|
fi,"GEN","$@");
|
|
|
|
defconfig:
|
|
rm -f config-all-devices.mak $(SUBDIR_DEVICES_MAK)
|
|
|
|
ifneq ($(wildcard config-host.mak),)
|
|
include $(SRC_PATH)/Makefile.objs
|
|
endif
|
|
|
|
dummy := $(call unnest-vars,, \
|
|
stub-obj-y \
|
|
chardev-obj-y \
|
|
util-obj-y \
|
|
qga-obj-y \
|
|
elf2dmp-obj-y \
|
|
ivshmem-client-obj-y \
|
|
ivshmem-server-obj-y \
|
|
rdmacm-mux-obj-y \
|
|
libvhost-user-obj-y \
|
|
vhost-user-scsi-obj-y \
|
|
vhost-user-blk-obj-y \
|
|
qga-vss-dll-obj-y \
|
|
block-obj-y \
|
|
block-obj-m \
|
|
crypto-obj-y \
|
|
crypto-aes-obj-y \
|
|
qom-obj-y \
|
|
io-obj-y \
|
|
common-obj-y \
|
|
common-obj-m \
|
|
ui-obj-y \
|
|
ui-obj-m \
|
|
audio-obj-y \
|
|
audio-obj-m \
|
|
trace-obj-y)
|
|
|
|
include $(SRC_PATH)/tests/Makefile.include
|
|
|
|
all: $(DOCS) $(TOOLS) $(HELPERS-y) recurse-all modules
|
|
|
|
qemu-version.h: FORCE
|
|
$(call quiet-command, \
|
|
(cd $(SRC_PATH); \
|
|
if test -n "$(PKGVERSION)"; then \
|
|
pkgvers="$(PKGVERSION)"; \
|
|
else \
|
|
if test -d .git; then \
|
|
pkgvers=$$(git describe --match 'v*' 2>/dev/null | tr -d '\n');\
|
|
if ! git diff-index --quiet HEAD &>/dev/null; then \
|
|
pkgvers="$${pkgvers}-dirty"; \
|
|
fi; \
|
|
fi; \
|
|
fi; \
|
|
printf "#define QEMU_PKGVERSION \"$${pkgvers}\"\n"; \
|
|
if test -n "$${pkgvers}"; then \
|
|
printf '#define QEMU_FULL_VERSION QEMU_VERSION " (" QEMU_PKGVERSION ")"\n'; \
|
|
else \
|
|
printf '#define QEMU_FULL_VERSION QEMU_VERSION\n'; \
|
|
fi; \
|
|
) > $@.tmp)
|
|
$(call quiet-command, if ! cmp -s $@ $@.tmp; then \
|
|
mv $@.tmp $@; \
|
|
else \
|
|
rm $@.tmp; \
|
|
fi)
|
|
|
|
config-host.h: config-host.h-timestamp
|
|
config-host.h-timestamp: config-host.mak
|
|
qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
|
|
|
|
SUBDIR_RULES=$(patsubst %,subdir-%, $(TARGET_DIRS))
|
|
SOFTMMU_SUBDIR_RULES=$(filter %-softmmu,$(SUBDIR_RULES))
|
|
|
|
$(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
|
|
$(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
|
|
$(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
|
|
$(SOFTMMU_SUBDIR_RULES): config-all-devices.mak
|
|
|
|
subdir-%:
|
|
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $* V="$(V)" TARGET_DIR="$*/" all,)
|
|
|
|
DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)" LIBFDT_srcdir=$(SRC_PATH)/dtc/libfdt
|
|
DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
|
|
DTC_CPPFLAGS=-I$(BUILD_DIR)/dtc -I$(SRC_PATH)/dtc -I$(SRC_PATH)/dtc/libfdt
|
|
|
|
subdir-dtc: .git-submodule-status dtc/libfdt dtc/tests
|
|
$(call quiet-command,$(MAKE) $(DTC_MAKE_ARGS) CPPFLAGS="$(DTC_CPPFLAGS)" CFLAGS="$(DTC_CFLAGS)" LDFLAGS="$(LDFLAGS)" ARFLAGS="$(ARFLAGS)" CC="$(CC)" AR="$(AR)" LD="$(LD)" $(SUBDIR_MAKEFLAGS) libfdt/libfdt.a,)
|
|
|
|
dtc/%: .git-submodule-status
|
|
@mkdir -p $@
|
|
|
|
# Overriding CFLAGS causes us to lose defines added in the sub-makefile.
|
|
# Not overriding CFLAGS leads to mis-matches between compilation modes.
|
|
# Therefore we replicate some of the logic in the sub-makefile.
|
|
# Remove all the extra -Warning flags that QEMU uses that Capstone doesn't;
|
|
# no need to annoy QEMU developers with such things.
|
|
CAP_CFLAGS = $(patsubst -W%,,$(CFLAGS) $(QEMU_CFLAGS))
|
|
CAP_CFLAGS += -DCAPSTONE_USE_SYS_DYN_MEM
|
|
CAP_CFLAGS += -DCAPSTONE_HAS_ARM
|
|
CAP_CFLAGS += -DCAPSTONE_HAS_ARM64
|
|
CAP_CFLAGS += -DCAPSTONE_HAS_POWERPC
|
|
CAP_CFLAGS += -DCAPSTONE_HAS_X86
|
|
|
|
subdir-capstone: .git-submodule-status
|
|
$(call quiet-command,$(MAKE) -C $(SRC_PATH)/capstone CAPSTONE_SHARED=no BUILDDIR="$(BUILD_DIR)/capstone" CC="$(CC)" AR="$(AR)" LD="$(LD)" RANLIB="$(RANLIB)" CFLAGS="$(CAP_CFLAGS)" $(SUBDIR_MAKEFLAGS) $(BUILD_DIR)/capstone/$(LIBCAPSTONE))
|
|
|
|
$(SUBDIR_RULES): libqemuutil.a $(common-obj-y) $(chardev-obj-y) \
|
|
$(qom-obj-y) $(crypto-aes-obj-$(CONFIG_USER_ONLY))
|
|
|
|
ROMSUBDIR_RULES=$(patsubst %,romsubdir-%, $(ROMS))
|
|
# Only keep -O and -g cflags
|
|
romsubdir-%:
|
|
$(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C pc-bios/$* V="$(V)" TARGET_DIR="$*/" CFLAGS="$(filter -O% -g%,$(CFLAGS))",)
|
|
|
|
ALL_SUBDIRS=$(TARGET_DIRS) $(patsubst %,pc-bios/%, $(ROMS))
|
|
|
|
recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
|
|
|
|
$(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h
|
|
$(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@ $<,"RC","version.o")
|
|
|
|
Makefile: $(version-obj-y)
|
|
|
|
######################################################################
|
|
# Build libraries
|
|
|
|
libqemuutil.a: $(util-obj-y) $(trace-obj-y) $(stub-obj-y)
|
|
libvhost-user.a: $(libvhost-user-obj-y)
|
|
|
|
######################################################################
|
|
|
|
COMMON_LDADDS = libqemuutil.a
|
|
|
|
qemu-img.o: qemu-img-cmds.h
|
|
|
|
qemu-img$(EXESUF): qemu-img.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
|
|
qemu-nbd$(EXESUF): qemu-nbd.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
|
|
qemu-io$(EXESUF): qemu-io.o $(block-obj-y) $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
|
|
|
|
qemu-bridge-helper$(EXESUF): qemu-bridge-helper.o $(COMMON_LDADDS)
|
|
|
|
qemu-keymap$(EXESUF): qemu-keymap.o ui/input-keymap.o $(COMMON_LDADDS)
|
|
|
|
qemu-edid$(EXESUF): qemu-edid.o hw/display/edid-generate.o $(COMMON_LDADDS)
|
|
|
|
fsdev/virtfs-proxy-helper$(EXESUF): fsdev/virtfs-proxy-helper.o fsdev/9p-marshal.o fsdev/9p-iov-marshal.o $(COMMON_LDADDS)
|
|
fsdev/virtfs-proxy-helper$(EXESUF): LIBS += -lcap
|
|
|
|
scsi/qemu-pr-helper$(EXESUF): scsi/qemu-pr-helper.o scsi/utils.o $(crypto-obj-y) $(io-obj-y) $(qom-obj-y) $(COMMON_LDADDS)
|
|
ifdef CONFIG_MPATH
|
|
scsi/qemu-pr-helper$(EXESUF): LIBS += -ludev -lmultipath -lmpathpersist
|
|
endif
|
|
|
|
qemu-img-cmds.h: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< > $@,"GEN","$@")
|
|
|
|
qemu-ga$(EXESUF): LIBS = $(LIBS_QGA)
|
|
qemu-ga$(EXESUF): QEMU_CFLAGS += -I qga/qapi-generated
|
|
|
|
qemu-keymap$(EXESUF): LIBS += $(XKBCOMMON_LIBS)
|
|
qemu-keymap$(EXESUF): QEMU_CFLAGS += $(XKBCOMMON_CFLAGS)
|
|
|
|
qapi-py = $(SRC_PATH)/scripts/qapi/commands.py \
|
|
$(SRC_PATH)/scripts/qapi/events.py \
|
|
$(SRC_PATH)/scripts/qapi/introspect.py \
|
|
$(SRC_PATH)/scripts/qapi/types.py \
|
|
$(SRC_PATH)/scripts/qapi/visit.py \
|
|
$(SRC_PATH)/scripts/qapi/common.py \
|
|
$(SRC_PATH)/scripts/qapi/doc.py \
|
|
$(SRC_PATH)/scripts/qapi-gen.py
|
|
|
|
qga/qapi-generated/qga-qapi-types.c qga/qapi-generated/qga-qapi-types.h \
|
|
qga/qapi-generated/qga-qapi-visit.c qga/qapi-generated/qga-qapi-visit.h \
|
|
qga/qapi-generated/qga-qapi-commands.h qga/qapi-generated/qga-qapi-commands.c \
|
|
qga/qapi-generated/qga-qapi-doc.texi: \
|
|
qga/qapi-generated/qapi-gen-timestamp ;
|
|
qga/qapi-generated/qapi-gen-timestamp: $(SRC_PATH)/qga/qapi-schema.json $(qapi-py)
|
|
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-gen.py \
|
|
-o qga/qapi-generated -p "qga-" $<, \
|
|
"GEN","$(@:%-timestamp=%)")
|
|
@>$@
|
|
|
|
qapi-modules = $(SRC_PATH)/qapi/qapi-schema.json \
|
|
$(QAPI_MODULES:%=$(SRC_PATH)/qapi/%.json)
|
|
|
|
$(GENERATED_QAPI_FILES): qapi-gen-timestamp ;
|
|
qapi-gen-timestamp: $(qapi-modules) $(qapi-py)
|
|
$(call quiet-command,$(PYTHON) $(SRC_PATH)/scripts/qapi-gen.py \
|
|
-o "qapi" -b $<, \
|
|
"GEN","$(@:%-timestamp=%)")
|
|
@>$@
|
|
|
|
QGALIB_GEN=$(addprefix qga/qapi-generated/, qga-qapi-types.h qga-qapi-visit.h qga-qapi-commands.h)
|
|
$(qga-obj-y): $(QGALIB_GEN)
|
|
|
|
qemu-ga$(EXESUF): $(qga-obj-y) $(COMMON_LDADDS)
|
|
$(call LINK, $^)
|
|
|
|
ifdef QEMU_GA_MSI_ENABLED
|
|
QEMU_GA_MSI=qemu-ga-$(ARCH).msi
|
|
|
|
msi: $(QEMU_GA_MSI)
|
|
|
|
$(QEMU_GA_MSI): qemu-ga.exe $(QGA_VSS_PROVIDER)
|
|
|
|
$(QEMU_GA_MSI): config-host.mak
|
|
|
|
$(QEMU_GA_MSI): $(SRC_PATH)/qga/installer/qemu-ga.wxs
|
|
$(call quiet-command,QEMU_GA_VERSION="$(QEMU_GA_VERSION)" QEMU_GA_MANUFACTURER="$(QEMU_GA_MANUFACTURER)" QEMU_GA_DISTRO="$(QEMU_GA_DISTRO)" BUILD_DIR="$(BUILD_DIR)" \
|
|
wixl -o $@ $(QEMU_GA_MSI_ARCH) $(QEMU_GA_MSI_WITH_VSS) $(QEMU_GA_MSI_MINGW_DLL_PATH) $<,"WIXL","$@")
|
|
else
|
|
msi:
|
|
@echo "MSI build not configured or dependency resolution failed (reconfigure with --enable-guest-agent-msi option)"
|
|
endif
|
|
|
|
ifneq ($(EXESUF),)
|
|
.PHONY: qemu-ga
|
|
qemu-ga: qemu-ga$(EXESUF) $(QGA_VSS_PROVIDER) $(QEMU_GA_MSI)
|
|
endif
|
|
|
|
elf2dmp: LIBS = $(CURL_LIBS)
|
|
elf2dmp: $(elf2dmp-obj-y)
|
|
$(call LINK, $^)
|
|
|
|
ifdef CONFIG_IVSHMEM
|
|
ivshmem-client$(EXESUF): $(ivshmem-client-obj-y) $(COMMON_LDADDS)
|
|
$(call LINK, $^)
|
|
ivshmem-server$(EXESUF): $(ivshmem-server-obj-y) $(COMMON_LDADDS)
|
|
$(call LINK, $^)
|
|
endif
|
|
vhost-user-scsi$(EXESUF): $(vhost-user-scsi-obj-y) libvhost-user.a
|
|
$(call LINK, $^)
|
|
vhost-user-blk$(EXESUF): $(vhost-user-blk-obj-y) libvhost-user.a
|
|
$(call LINK, $^)
|
|
rdmacm-mux$(EXESUF): $(rdmacm-mux-obj-y) $(COMMON_LDADDS)
|
|
$(call LINK, $^)
|
|
|
|
module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-host.mak
|
|
$(call quiet-command,$(PYTHON) $< $@ \
|
|
$(addprefix $(SRC_PATH)/,$(patsubst %.mo,%.c,$(block-obj-m))), \
|
|
"GEN","$@")
|
|
|
|
ifdef CONFIG_GCOV
|
|
.PHONY: clean-coverage
|
|
clean-coverage:
|
|
$(call quiet-command, \
|
|
find . \( -name '*.gcda' -o -name '*.gcov' \) -type f -exec rm {} +, \
|
|
"CLEAN", "coverage files")
|
|
endif
|
|
|
|
clean:
|
|
# avoid old build problems by removing potentially incorrect old files
|
|
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h gen-op-arm.h
|
|
rm -f qemu-options.def
|
|
rm -f *.msi
|
|
find . \( -name '*.so' -o -name '*.dll' -o -name '*.mo' -o -name '*.[oda]' \) -type f -exec rm {} +
|
|
rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga TAGS cscope.* *.pod *~ */*~
|
|
rm -f fsdev/*.pod scsi/*.pod
|
|
rm -f qemu-img-cmds.h
|
|
rm -f ui/shader/*-vert.h ui/shader/*-frag.h
|
|
@# May not be present in GENERATED_FILES
|
|
rm -f trace/generated-tracers-dtrace.dtrace*
|
|
rm -f trace/generated-tracers-dtrace.h*
|
|
rm -f $(foreach f,$(GENERATED_FILES),$(f) $(f)-timestamp)
|
|
rm -f qapi-gen-timestamp
|
|
rm -rf qga/qapi-generated
|
|
for d in $(ALL_SUBDIRS); do \
|
|
if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
|
|
rm -f $$d/qemu-options.def; \
|
|
done
|
|
rm -f config-all-devices.mak
|
|
|
|
VERSION ?= $(shell cat VERSION)
|
|
|
|
dist: qemu-$(VERSION).tar.bz2
|
|
|
|
qemu-%.tar.bz2:
|
|
$(SRC_PATH)/scripts/make-release "$(SRC_PATH)" "$(patsubst qemu-%.tar.bz2,%,$@)"
|
|
|
|
distclean: clean
|
|
rm -f config-host.mak config-host.h* config-host.ld $(DOCS) qemu-options.texi qemu-img-cmds.texi qemu-monitor.texi qemu-monitor-info.texi
|
|
rm -f config-all-devices.mak config-all-disas.mak config.status
|
|
rm -f $(SUBDIR_DEVICES_MAK)
|
|
rm -f po/*.mo tests/qemu-iotests/common.env
|
|
rm -f roms/seabios/config.mak roms/vgabios/config.mak
|
|
rm -f qemu-doc.info qemu-doc.aux qemu-doc.cp qemu-doc.cps
|
|
rm -f qemu-doc.fn qemu-doc.fns qemu-doc.info qemu-doc.ky qemu-doc.kys
|
|
rm -f qemu-doc.log qemu-doc.pdf qemu-doc.pg qemu-doc.toc qemu-doc.tp
|
|
rm -f qemu-doc.vr qemu-doc.txt
|
|
rm -f config.log
|
|
rm -f linux-headers/asm
|
|
rm -f docs/version.texi
|
|
rm -f docs/interop/qemu-ga-qapi.texi docs/interop/qemu-qmp-qapi.texi
|
|
rm -f docs/interop/qemu-qmp-ref.7 docs/interop/qemu-ga-ref.7
|
|
rm -f docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
|
|
rm -f docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
|
|
rm -f docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
|
|
rm -f docs/qemu-block-drivers.7
|
|
rm -f docs/qemu-cpu-models.7
|
|
for d in $(TARGET_DIRS); do \
|
|
rm -rf $$d || exit 1 ; \
|
|
done
|
|
rm -Rf .sdk
|
|
if test -f dtc/version_gen.h; then $(MAKE) $(DTC_MAKE_ARGS) clean; fi
|
|
|
|
KEYMAPS=da en-gb et fr fr-ch is lt modifiers no pt-br sv \
|
|
ar de en-us fi fr-be hr it lv nl pl ru th \
|
|
common de-ch es fo fr-ca hu ja mk nl-be pt sl tr \
|
|
bepo cz
|
|
|
|
ifdef INSTALL_BLOBS
|
|
BLOBS=bios.bin bios-256k.bin sgabios.bin vgabios.bin vgabios-cirrus.bin \
|
|
vgabios-stdvga.bin vgabios-vmware.bin vgabios-qxl.bin vgabios-virtio.bin \
|
|
vgabios-ramfb.bin vgabios-bochs-display.bin \
|
|
ppc_rom.bin openbios-sparc32 openbios-sparc64 openbios-ppc QEMU,tcx.bin QEMU,cgthree.bin \
|
|
pxe-e1000.rom pxe-eepro100.rom pxe-ne2k_pci.rom \
|
|
pxe-pcnet.rom pxe-rtl8139.rom pxe-virtio.rom \
|
|
efi-e1000.rom efi-eepro100.rom efi-ne2k_pci.rom \
|
|
efi-pcnet.rom efi-rtl8139.rom efi-virtio.rom \
|
|
efi-e1000e.rom efi-vmxnet3.rom \
|
|
qemu-icon.bmp qemu_logo_no_text.svg \
|
|
bamboo.dtb canyonlands.dtb petalogix-s3adsp1800.dtb petalogix-ml605.dtb \
|
|
multiboot.bin linuxboot.bin linuxboot_dma.bin kvmvapic.bin \
|
|
s390-ccw.img s390-netboot.img \
|
|
spapr-rtas.bin slof.bin skiboot.lid \
|
|
palcode-clipper \
|
|
u-boot.e500 u-boot-sam460-20100605.bin \
|
|
qemu_vga.ndrv \
|
|
hppa-firmware.img
|
|
else
|
|
BLOBS=
|
|
endif
|
|
|
|
install-doc: $(DOCS)
|
|
$(INSTALL_DIR) "$(DESTDIR)$(qemu_docdir)"
|
|
$(INSTALL_DATA) qemu-doc.html "$(DESTDIR)$(qemu_docdir)"
|
|
$(INSTALL_DATA) qemu-doc.txt "$(DESTDIR)$(qemu_docdir)"
|
|
$(INSTALL_DATA) docs/interop/qemu-qmp-ref.html "$(DESTDIR)$(qemu_docdir)"
|
|
$(INSTALL_DATA) docs/interop/qemu-qmp-ref.txt "$(DESTDIR)$(qemu_docdir)"
|
|
ifdef CONFIG_POSIX
|
|
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
|
|
$(INSTALL_DATA) qemu.1 "$(DESTDIR)$(mandir)/man1"
|
|
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man7"
|
|
$(INSTALL_DATA) docs/interop/qemu-qmp-ref.7 "$(DESTDIR)$(mandir)/man7"
|
|
$(INSTALL_DATA) docs/qemu-block-drivers.7 "$(DESTDIR)$(mandir)/man7"
|
|
$(INSTALL_DATA) docs/qemu-cpu-models.7 "$(DESTDIR)$(mandir)/man7"
|
|
ifneq ($(TOOLS),)
|
|
$(INSTALL_DATA) qemu-img.1 "$(DESTDIR)$(mandir)/man1"
|
|
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man8"
|
|
$(INSTALL_DATA) qemu-nbd.8 "$(DESTDIR)$(mandir)/man8"
|
|
endif
|
|
ifneq (,$(findstring qemu-ga,$(TOOLS)))
|
|
$(INSTALL_DATA) qemu-ga.8 "$(DESTDIR)$(mandir)/man8"
|
|
$(INSTALL_DATA) docs/interop/qemu-ga-ref.html "$(DESTDIR)$(qemu_docdir)"
|
|
$(INSTALL_DATA) docs/interop/qemu-ga-ref.txt "$(DESTDIR)$(qemu_docdir)"
|
|
$(INSTALL_DATA) docs/interop/qemu-ga-ref.7 "$(DESTDIR)$(mandir)/man7"
|
|
endif
|
|
endif
|
|
ifdef CONFIG_VIRTFS
|
|
$(INSTALL_DIR) "$(DESTDIR)$(mandir)/man1"
|
|
$(INSTALL_DATA) fsdev/virtfs-proxy-helper.1 "$(DESTDIR)$(mandir)/man1"
|
|
endif
|
|
|
|
install-datadir:
|
|
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)"
|
|
|
|
install-localstatedir:
|
|
ifdef CONFIG_POSIX
|
|
ifneq (,$(findstring qemu-ga,$(TOOLS)))
|
|
$(INSTALL_DIR) "$(DESTDIR)$(qemu_localstatedir)"/run
|
|
endif
|
|
endif
|
|
|
|
|
|
install: all $(if $(BUILD_DOCS),install-doc) install-datadir install-localstatedir
|
|
ifneq ($(TOOLS),)
|
|
$(call install-prog,$(subst qemu-ga,qemu-ga$(EXESUF),$(TOOLS)),$(DESTDIR)$(bindir))
|
|
endif
|
|
ifneq ($(CONFIG_MODULES),)
|
|
$(INSTALL_DIR) "$(DESTDIR)$(qemu_moddir)"
|
|
for s in $(modules-m:.mo=$(DSOSUF)); do \
|
|
t="$(DESTDIR)$(qemu_moddir)/$$(echo $$s | tr / -)"; \
|
|
$(INSTALL_LIB) $$s "$$t"; \
|
|
test -z "$(STRIP)" || $(STRIP) "$$t"; \
|
|
done
|
|
endif
|
|
ifneq ($(HELPERS-y),)
|
|
$(call install-prog,$(HELPERS-y),$(DESTDIR)$(libexecdir))
|
|
endif
|
|
ifneq ($(BLOBS),)
|
|
set -e; for x in $(BLOBS); do \
|
|
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/$$x "$(DESTDIR)$(qemu_datadir)"; \
|
|
done
|
|
endif
|
|
ifdef CONFIG_GTK
|
|
$(MAKE) -C po $@
|
|
endif
|
|
$(INSTALL_DIR) "$(DESTDIR)$(qemu_datadir)/keymaps"
|
|
set -e; for x in $(KEYMAPS); do \
|
|
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x "$(DESTDIR)$(qemu_datadir)/keymaps"; \
|
|
done
|
|
$(INSTALL_DATA) $(BUILD_DIR)/trace-events-all "$(DESTDIR)$(qemu_datadir)/trace-events-all"
|
|
for d in $(TARGET_DIRS); do \
|
|
$(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
|
|
done
|
|
|
|
.PHONY: ctags
|
|
ctags:
|
|
rm -f tags
|
|
find "$(SRC_PATH)" -name '*.[hc]' -exec ctags --append {} +
|
|
|
|
.PHONY: TAGS
|
|
TAGS:
|
|
rm -f TAGS
|
|
find "$(SRC_PATH)" -name '*.[hc]' -exec etags --append {} +
|
|
|
|
cscope:
|
|
rm -f "$(SRC_PATH)"/cscope.*
|
|
find "$(SRC_PATH)/" -name "*.[chsS]" -print | sed 's,^\./,,' > "$(SRC_PATH)/cscope.files"
|
|
cscope -b -i"$(SRC_PATH)/cscope.files"
|
|
|
|
# opengl shader programs
|
|
ui/shader/%-vert.h: $(SRC_PATH)/ui/shader/%.vert $(SRC_PATH)/scripts/shaderinclude.pl
|
|
@mkdir -p $(dir $@)
|
|
$(call quiet-command,\
|
|
perl $(SRC_PATH)/scripts/shaderinclude.pl $< > $@,\
|
|
"VERT","$@")
|
|
|
|
ui/shader/%-frag.h: $(SRC_PATH)/ui/shader/%.frag $(SRC_PATH)/scripts/shaderinclude.pl
|
|
@mkdir -p $(dir $@)
|
|
$(call quiet-command,\
|
|
perl $(SRC_PATH)/scripts/shaderinclude.pl $< > $@,\
|
|
"FRAG","$@")
|
|
|
|
ui/shader.o: $(SRC_PATH)/ui/shader.c \
|
|
ui/shader/texture-blit-vert.h \
|
|
ui/shader/texture-blit-flip-vert.h \
|
|
ui/shader/texture-blit-frag.h
|
|
|
|
# documentation
|
|
MAKEINFO=makeinfo
|
|
MAKEINFOINCLUDES= -I docs -I $(<D) -I $(@D)
|
|
MAKEINFOFLAGS=--no-split --number-sections $(MAKEINFOINCLUDES)
|
|
TEXI2PODFLAGS=$(MAKEINFOINCLUDES) "-DVERSION=$(VERSION)"
|
|
TEXI2PDFFLAGS=$(if $(V),,--quiet) -I $(SRC_PATH) $(MAKEINFOINCLUDES)
|
|
|
|
docs/version.texi: $(SRC_PATH)/VERSION
|
|
$(call quiet-command,echo "@set VERSION $(VERSION)" > $@,"GEN","$@")
|
|
|
|
%.html: %.texi docs/version.texi
|
|
$(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
|
|
--html $< -o $@,"GEN","$@")
|
|
|
|
%.info: %.texi docs/version.texi
|
|
$(call quiet-command,$(MAKEINFO) $(MAKEINFOFLAGS) $< -o $@,"GEN","$@")
|
|
|
|
%.txt: %.texi docs/version.texi
|
|
$(call quiet-command,LC_ALL=C $(MAKEINFO) $(MAKEINFOFLAGS) --no-headers \
|
|
--plaintext $< -o $@,"GEN","$@")
|
|
|
|
%.pdf: %.texi docs/version.texi
|
|
$(call quiet-command,texi2pdf $(TEXI2PDFFLAGS) $< -o $@,"GEN","$@")
|
|
|
|
qemu-options.texi: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
|
|
|
|
qemu-monitor.texi: $(SRC_PATH)/hmp-commands.hx $(SRC_PATH)/scripts/hxtool
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
|
|
|
|
qemu-monitor-info.texi: $(SRC_PATH)/hmp-commands-info.hx $(SRC_PATH)/scripts/hxtool
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
|
|
|
|
qemu-img-cmds.texi: $(SRC_PATH)/qemu-img-cmds.hx $(SRC_PATH)/scripts/hxtool
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -t < $< > $@,"GEN","$@")
|
|
|
|
docs/interop/qemu-qmp-qapi.texi: qapi/qapi-doc.texi
|
|
@cp -p $< $@
|
|
|
|
docs/interop/qemu-ga-qapi.texi: qga/qapi-generated/qga-qapi-doc.texi
|
|
@cp -p $< $@
|
|
|
|
qemu.1: qemu-doc.texi qemu-options.texi qemu-monitor.texi qemu-monitor-info.texi
|
|
qemu.1: qemu-option-trace.texi
|
|
qemu-img.1: qemu-img.texi qemu-option-trace.texi qemu-img-cmds.texi
|
|
fsdev/virtfs-proxy-helper.1: fsdev/virtfs-proxy-helper.texi
|
|
qemu-nbd.8: qemu-nbd.texi qemu-option-trace.texi
|
|
qemu-ga.8: qemu-ga.texi
|
|
docs/qemu-block-drivers.7: docs/qemu-block-drivers.texi
|
|
docs/qemu-cpu-models.7: docs/qemu-cpu-models.texi
|
|
|
|
html: qemu-doc.html docs/interop/qemu-qmp-ref.html docs/interop/qemu-ga-ref.html
|
|
info: qemu-doc.info docs/interop/qemu-qmp-ref.info docs/interop/qemu-ga-ref.info
|
|
pdf: qemu-doc.pdf docs/interop/qemu-qmp-ref.pdf docs/interop/qemu-ga-ref.pdf
|
|
txt: qemu-doc.txt docs/interop/qemu-qmp-ref.txt docs/interop/qemu-ga-ref.txt
|
|
|
|
qemu-doc.html qemu-doc.info qemu-doc.pdf qemu-doc.txt: \
|
|
qemu-img.texi qemu-nbd.texi qemu-options.texi qemu-option-trace.texi \
|
|
qemu-deprecated.texi qemu-monitor.texi qemu-img-cmds.texi qemu-ga.texi \
|
|
qemu-monitor-info.texi docs/qemu-block-drivers.texi \
|
|
docs/qemu-cpu-models.texi
|
|
|
|
docs/interop/qemu-ga-ref.dvi docs/interop/qemu-ga-ref.html \
|
|
docs/interop/qemu-ga-ref.info docs/interop/qemu-ga-ref.pdf \
|
|
docs/interop/qemu-ga-ref.txt docs/interop/qemu-ga-ref.7: \
|
|
docs/interop/qemu-ga-ref.texi docs/interop/qemu-ga-qapi.texi
|
|
|
|
docs/interop/qemu-qmp-ref.dvi docs/interop/qemu-qmp-ref.html \
|
|
docs/interop/qemu-qmp-ref.info docs/interop/qemu-qmp-ref.pdf \
|
|
docs/interop/qemu-qmp-ref.txt docs/interop/qemu-qmp-ref.7: \
|
|
docs/interop/qemu-qmp-ref.texi docs/interop/qemu-qmp-qapi.texi
|
|
|
|
# Reports/Analysis
|
|
|
|
%/coverage-report.html:
|
|
@mkdir -p $*
|
|
$(call quiet-command,\
|
|
gcovr -p --html --html-details -o $@, \
|
|
"GEN", "coverage-report.html")
|
|
|
|
.PHONY: coverage-report
|
|
coverage-report: $(CURDIR)/reports/coverage/coverage-report.html
|
|
|
|
ifdef CONFIG_WIN32
|
|
|
|
INSTALLER = qemu-setup-$(VERSION)$(EXESUF)
|
|
|
|
nsisflags = -V2 -NOCD
|
|
|
|
ifneq ($(wildcard $(SRC_PATH)/dll),)
|
|
ifeq ($(ARCH),x86_64)
|
|
# 64 bit executables
|
|
DLL_PATH = $(SRC_PATH)/dll/w64
|
|
nsisflags += -DW64
|
|
else
|
|
# 32 bit executables
|
|
DLL_PATH = $(SRC_PATH)/dll/w32
|
|
endif
|
|
endif
|
|
|
|
.PHONY: installer
|
|
installer: $(INSTALLER)
|
|
|
|
INSTDIR=/tmp/qemu-nsis
|
|
|
|
$(INSTALLER): $(SRC_PATH)/qemu.nsi
|
|
$(MAKE) install prefix=${INSTDIR}
|
|
ifdef SIGNCODE
|
|
(cd ${INSTDIR}; \
|
|
for i in *.exe; do \
|
|
$(SIGNCODE) $${i}; \
|
|
done \
|
|
)
|
|
endif # SIGNCODE
|
|
(cd ${INSTDIR}; \
|
|
for i in qemu-system-*.exe; do \
|
|
arch=$${i%.exe}; \
|
|
arch=$${arch#qemu-system-}; \
|
|
echo Section \"$$arch\" Section_$$arch; \
|
|
echo SetOutPath \"\$$INSTDIR\"; \
|
|
echo File \"\$${BINDIR}\\$$i\"; \
|
|
echo SectionEnd; \
|
|
done \
|
|
) >${INSTDIR}/system-emulations.nsh
|
|
makensis $(nsisflags) \
|
|
$(if $(BUILD_DOCS),-DCONFIG_DOCUMENTATION="y") \
|
|
$(if $(CONFIG_GTK),-DCONFIG_GTK="y") \
|
|
-DBINDIR="${INSTDIR}" \
|
|
$(if $(DLL_PATH),-DDLLDIR="$(DLL_PATH)") \
|
|
-DSRCDIR="$(SRC_PATH)" \
|
|
-DOUTFILE="$(INSTALLER)" \
|
|
-DDISPLAYVERSION="$(VERSION)" \
|
|
$(SRC_PATH)/qemu.nsi
|
|
rm -r ${INSTDIR}
|
|
ifdef SIGNCODE
|
|
$(SIGNCODE) $(INSTALLER)
|
|
endif # SIGNCODE
|
|
endif # CONFIG_WIN
|
|
|
|
# Add a dependency on the generated files, so that they are always
|
|
# rebuilt before other object files
|
|
ifneq ($(wildcard config-host.mak),)
|
|
ifneq ($(filter-out $(UNCHECKED_GOALS),$(MAKECMDGOALS)),$(if $(MAKECMDGOALS),,fail))
|
|
Makefile: $(GENERATED_FILES)
|
|
endif
|
|
endif
|
|
|
|
.SECONDARY: $(TRACE_HEADERS) $(TRACE_HEADERS:%=%-timestamp) \
|
|
$(TRACE_SOURCES) $(TRACE_SOURCES:%=%-timestamp) \
|
|
$(TRACE_DTRACE) $(TRACE_DTRACE:%=%-timestamp)
|
|
|
|
# Include automatically generated dependency files
|
|
# Dependencies in Makefile.objs files come from our recursive subdir rules
|
|
-include $(wildcard *.d tests/*.d)
|
|
|
|
include $(SRC_PATH)/tests/docker/Makefile.include
|
|
include $(SRC_PATH)/tests/vm/Makefile.include
|
|
|
|
.PHONY: help
|
|
help:
|
|
@echo 'Generic targets:'
|
|
@echo ' all - Build all'
|
|
ifdef CONFIG_MODULES
|
|
@echo ' modules - Build all modules'
|
|
endif
|
|
@echo ' dir/file.o - Build specified target only'
|
|
@echo ' install - Install QEMU, documentation and tools'
|
|
@echo ' ctags/TAGS - Generate tags file for editors'
|
|
@echo ' cscope - Generate cscope index'
|
|
@echo ''
|
|
@$(if $(TARGET_DIRS), \
|
|
echo 'Architecture specific targets:'; \
|
|
$(foreach t, $(TARGET_DIRS), \
|
|
printf " %-30s - Build for %s\\n" $(patsubst %,subdir-%,$(t)) $(t);) \
|
|
echo '')
|
|
@echo 'Cleaning targets:'
|
|
@echo ' clean - Remove most generated files but keep the config'
|
|
ifdef CONFIG_GCOV
|
|
@echo ' clean-coverage - Remove coverage files'
|
|
endif
|
|
@echo ' distclean - Remove all generated files'
|
|
@echo ' dist - Build a distributable tarball'
|
|
@echo ''
|
|
@echo 'Test targets:'
|
|
@echo ' check - Run all tests (check-help for details)'
|
|
@echo ' docker - Help about targets running tests inside Docker containers'
|
|
@echo ' vm-test - Help about targets running tests inside VM'
|
|
@echo ''
|
|
@echo 'Documentation targets:'
|
|
@echo ' html info pdf txt'
|
|
@echo ' - Build documentation in specified format'
|
|
ifdef CONFIG_GCOV
|
|
@echo ' coverage-report - Create code coverage report'
|
|
endif
|
|
@echo ''
|
|
ifdef CONFIG_WIN32
|
|
@echo 'Windows targets:'
|
|
@echo ' installer - Build NSIS-based installer for QEMU'
|
|
ifdef QEMU_GA_MSI_ENABLED
|
|
@echo ' msi - Build MSI-based installer for qemu-ga'
|
|
endif
|
|
@echo ''
|
|
endif
|
|
@echo ' $(MAKE) [targets] (quiet build, default)'
|
|
@echo ' $(MAKE) V=1 [targets] (verbose build)'
|