OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
e40f60730a
qemu-e2k/hw/sd/ssi-sd.c
Markus Armbruster 0b8fa32f55 Include qemu/module.h where needed, drop it from qemu-common.h 
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-4-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c
hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c;
ui/cocoa.m fixed up]
2019-06-12 13:18:33 +02:00

305 lines
9.7 KiB
C
Raw Blame History

/*
* SSI to SD card adapter.
*
* Copyright (c) 2007-2009 CodeSourcery.
* Written by Paul Brook
*
* This code is licensed under the GNU GPL v2.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "sysemu/blockdev.h"
#include "hw/ssi/ssi.h"
#include "hw/sd/sd.h"
#include "qapi/error.h"
#include "qemu/module.h"
//#define DEBUG_SSI_SD 1
#ifdef DEBUG_SSI_SD
#define DPRINTF(fmt, ...) \
do { printf("ssi_sd: " fmt , ## __VA_ARGS__); } while (0)
#define BADF(fmt, ...) \
do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
#else
#define DPRINTF(fmt, ...) do {} while(0)
#define BADF(fmt, ...) \
do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__);} while (0)
#endif
typedef enum {
SSI_SD_CMD = 0,
SSI_SD_CMDARG,
SSI_SD_RESPONSE,
SSI_SD_DATA_START,
SSI_SD_DATA_READ,
} ssi_sd_mode;
typedef struct {
SSISlave ssidev;
uint32_t mode;
int cmd;
uint8_t cmdarg[4];
uint8_t response[5];
int32_t arglen;
int32_t response_pos;
int32_t stopping;
SDBus sdbus;
} ssi_sd_state;
#define TYPE_SSI_SD "ssi-sd"
#define SSI_SD(obj) OBJECT_CHECK(ssi_sd_state, (obj), TYPE_SSI_SD)
/* State word bits. */
#define SSI_SDR_LOCKED 0x0001
#define SSI_SDR_WP_ERASE 0x0002
#define SSI_SDR_ERROR 0x0004
#define SSI_SDR_CC_ERROR 0x0008
#define SSI_SDR_ECC_FAILED 0x0010
#define SSI_SDR_WP_VIOLATION 0x0020
#define SSI_SDR_ERASE_PARAM 0x0040
#define SSI_SDR_OUT_OF_RANGE 0x0080
#define SSI_SDR_IDLE 0x0100
#define SSI_SDR_ERASE_RESET 0x0200
#define SSI_SDR_ILLEGAL_COMMAND 0x0400
#define SSI_SDR_COM_CRC_ERROR 0x0800
#define SSI_SDR_ERASE_SEQ_ERROR 0x1000
#define SSI_SDR_ADDRESS_ERROR 0x2000
#define SSI_SDR_PARAMETER_ERROR 0x4000
static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val)
{
ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev);
/* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */
if (s->mode == SSI_SD_DATA_READ && val == 0x4d) {
s->mode = SSI_SD_CMD;
/* There must be at least one byte delay before the card responds. */
s->stopping = 1;
}
switch (s->mode) {
case SSI_SD_CMD:
if (val == 0xff) {
DPRINTF("NULL command\n");
return 0xff;
}
s->cmd = val & 0x3f;
s->mode = SSI_SD_CMDARG;
s->arglen = 0;
return 0xff;
case SSI_SD_CMDARG:
if (s->arglen == 4) {
SDRequest request;
uint8_t longresp[16];
/* FIXME: Check CRC. */
request.cmd = s->cmd;
request.arg = ldl_be_p(s->cmdarg);
DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg);
s->arglen = sdbus_do_command(&s->sdbus, &request, longresp);
if (s->arglen <= 0) {
s->arglen = 1;
s->response[0] = 4;
DPRINTF("SD command failed\n");
} else if (s->cmd == 58) {
/* CMD58 returns R3 response (OCR) */
DPRINTF("Returned OCR\n");
s->arglen = 5;
s->response[0] = 1;
memcpy(&s->response[1], longresp, 4);
} else if (s->arglen != 4) {
BADF("Unexpected response to cmd %d\n", s->cmd);
/* Illegal command is about as near as we can get. */
s->arglen = 1;
s->response[0] = 4;
} else {
/* All other commands return status. */
uint32_t cardstatus;
uint16_t status;
/* CMD13 returns a 2-byte statuse work. Other commands
only return the first byte. */
s->arglen = (s->cmd == 13) ? 2 : 1;
cardstatus = ldl_be_p(longresp);
status = 0;
if (((cardstatus >> 9) & 0xf) < 4)
status |= SSI_SDR_IDLE;
if (cardstatus & ERASE_RESET)
status |= SSI_SDR_ERASE_RESET;
if (cardstatus & ILLEGAL_COMMAND)
status |= SSI_SDR_ILLEGAL_COMMAND;
if (cardstatus & COM_CRC_ERROR)
status |= SSI_SDR_COM_CRC_ERROR;
if (cardstatus & ERASE_SEQ_ERROR)
status |= SSI_SDR_ERASE_SEQ_ERROR;
if (cardstatus & ADDRESS_ERROR)
status |= SSI_SDR_ADDRESS_ERROR;
if (cardstatus & CARD_IS_LOCKED)
status |= SSI_SDR_LOCKED;
if (cardstatus & (LOCK_UNLOCK_FAILED | WP_ERASE_SKIP))
status |= SSI_SDR_WP_ERASE;
if (cardstatus & SD_ERROR)
status |= SSI_SDR_ERROR;
if (cardstatus & CC_ERROR)
status |= SSI_SDR_CC_ERROR;
if (cardstatus & CARD_ECC_FAILED)
status |= SSI_SDR_ECC_FAILED;
if (cardstatus & WP_VIOLATION)
status |= SSI_SDR_WP_VIOLATION;
if (cardstatus & ERASE_PARAM)
status |= SSI_SDR_ERASE_PARAM;
if (cardstatus & (OUT_OF_RANGE | CID_CSD_OVERWRITE))
status |= SSI_SDR_OUT_OF_RANGE;
/* ??? Don't know what Parameter Error really means, so
assume it's set if the second byte is nonzero. */
if (status & 0xff)
status |= SSI_SDR_PARAMETER_ERROR;
s->response[0] = status >> 8;
s->response[1] = status;
DPRINTF("Card status 0x%02x\n", status);
}
s->mode = SSI_SD_RESPONSE;
s->response_pos = 0;
} else {
s->cmdarg[s->arglen++] = val;
}
return 0xff;
case SSI_SD_RESPONSE:
if (s->stopping) {
s->stopping = 0;
return 0xff;
}
if (s->response_pos < s->arglen) {
DPRINTF("Response 0x%02x\n", s->response[s->response_pos]);
return s->response[s->response_pos++];
}
if (sdbus_data_ready(&s->sdbus)) {
DPRINTF("Data read\n");
s->mode = SSI_SD_DATA_START;
} else {
DPRINTF("End of command\n");
s->mode = SSI_SD_CMD;
}
return 0xff;
case SSI_SD_DATA_START:
DPRINTF("Start read block\n");
s->mode = SSI_SD_DATA_READ;
return 0xfe;
case SSI_SD_DATA_READ:
val = sdbus_read_data(&s->sdbus);
if (!sdbus_data_ready(&s->sdbus)) {
DPRINTF("Data read end\n");
s->mode = SSI_SD_CMD;
}
return val;
}
/* Should never happen. */
return 0xff;
}
static int ssi_sd_post_load(void *opaque, int version_id)
{
ssi_sd_state *s = (ssi_sd_state *)opaque;
if (s->mode > SSI_SD_DATA_READ) {
return -EINVAL;
}
if (s->mode == SSI_SD_CMDARG &&
(s->arglen < 0 || s->arglen >= ARRAY_SIZE(s->cmdarg))) {
return -EINVAL;
}
if (s->mode == SSI_SD_RESPONSE &&
(s->response_pos < 0 || s->response_pos >= ARRAY_SIZE(s->response) ||
(!s->stopping && s->arglen > ARRAY_SIZE(s->response)))) {
return -EINVAL;
}
return 0;
}
static const VMStateDescription vmstate_ssi_sd = {
.name = "ssi_sd",
.version_id = 2,
.minimum_version_id = 2,
.post_load = ssi_sd_post_load,
.fields = (VMStateField []) {
VMSTATE_UINT32(mode, ssi_sd_state),
VMSTATE_INT32(cmd, ssi_sd_state),
VMSTATE_UINT8_ARRAY(cmdarg, ssi_sd_state, 4),
VMSTATE_UINT8_ARRAY(response, ssi_sd_state, 5),
VMSTATE_INT32(arglen, ssi_sd_state),
VMSTATE_INT32(response_pos, ssi_sd_state),
VMSTATE_INT32(stopping, ssi_sd_state),
VMSTATE_SSI_SLAVE(ssidev, ssi_sd_state),
VMSTATE_END_OF_LIST()
}
};
static void ssi_sd_realize(SSISlave *d, Error **errp)
{
ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, d);
DeviceState *carddev;
DriveInfo *dinfo;
Error *err = NULL;
qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), TYPE_SD_BUS,
DEVICE(d), "sd-bus");
/* Create and plug in the sd card */
/* FIXME use a qdev drive property instead of drive_get_next() */
dinfo = drive_get_next(IF_SD);
carddev = qdev_create(BUS(&s->sdbus), TYPE_SD_CARD);
if (dinfo) {
qdev_prop_set_drive(carddev, "drive", blk_by_legacy_dinfo(dinfo), &err);
}
object_property_set_bool(OBJECT(carddev), true, "spi", &err);
object_property_set_bool(OBJECT(carddev), true, "realized", &err);
if (err) {
error_setg(errp, "failed to init SD card: %s", error_get_pretty(err));
return;
}
}
static void ssi_sd_reset(DeviceState *dev)
{
ssi_sd_state *s = SSI_SD(dev);
s->mode = SSI_SD_CMD;
s->cmd = 0;
memset(s->cmdarg, 0, sizeof(s->cmdarg));
memset(s->response, 0, sizeof(s->response));
s->arglen = 0;
s->response_pos = 0;
s->stopping = 0;
}
static void ssi_sd_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
k->realize = ssi_sd_realize;
k->transfer = ssi_sd_transfer;
k->cs_polarity = SSI_CS_LOW;
dc->vmsd = &vmstate_ssi_sd;
dc->reset = ssi_sd_reset;
/* Reason: init() method uses drive_get_next() */
dc->user_creatable = false;
}
static const TypeInfo ssi_sd_info = {
.name = TYPE_SSI_SD,
.parent = TYPE_SSI_SLAVE,
.instance_size = sizeof(ssi_sd_state),
.class_init = ssi_sd_class_init,
};
static void ssi_sd_register_types(void)
{
type_register_static(&ssi_sd_info);
}
type_init(ssi_sd_register_types)
Reference in New Issue View Git Blame Copy Permalink