OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
e5455b8c1c
qemu-e2k/hw/arm/mps2.c
Peter Maydell 4fb013afcc hw/misc/mps2-scc: Support configurable number of OSCCLK values 
Currently the MPS2 SCC device implements a fixed number of OSCCLK
values (3).  The variant of this device in the MPS3 AN524 board has 6
OSCCLK values.  Switch to using a PROP_ARRAY, which allows board code
to specify how large the OSCCLK array should be as well as its
values.

With a variable-length property array, the SCC no longer specifies
default values for the OSCCLKs, so we must set them explicitly in the
board code.  This defaults are actually incorrect for the an521 and
an505; we will correct this bug in a following patch.

This is a migration compatibility break for all the mps boards.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210215115138.20465-3-peter.maydell@linaro.org
2021-03-06 13:30:38 +00:00

542 lines
20 KiB
C
Raw Blame History

/*
* ARM V2M MPS2 board emulation.
*
* Copyright (c) 2017 Linaro Limited
* Written by Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or
* (at your option) any later version.
*/
/* The MPS2 and MPS2+ dev boards are FPGA based (the 2+ has a bigger
* FPGA but is otherwise the same as the 2). Since the CPU itself
* and most of the devices are in the FPGA, the details of the board
* as seen by the guest depend significantly on the FPGA image.
* We model the following FPGA images:
* "mps2-an385" -- Cortex-M3 as documented in ARM Application Note AN385
* "mps2-an386" -- Cortex-M4 as documented in ARM Application Note AN386
* "mps2-an500" -- Cortex-M7 as documented in ARM Application Note AN500
* "mps2-an511" -- Cortex-M3 'DesignStart' as documented in AN511
*
* Links to the TRM for the board itself and to the various Application
* Notes which document the FPGA images can be found here:
* https://developer.arm.com/products/system-design/development-boards/cortex-m-prototyping-system
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qemu/cutils.h"
#include "qapi/error.h"
#include "qemu/error-report.h"
#include "hw/arm/boot.h"
#include "hw/arm/armv7m.h"
#include "hw/or-irq.h"
#include "hw/boards.h"
#include "exec/address-spaces.h"
#include "sysemu/sysemu.h"
#include "hw/misc/unimp.h"
#include "hw/char/cmsdk-apb-uart.h"
#include "hw/timer/cmsdk-apb-timer.h"
#include "hw/timer/cmsdk-apb-dualtimer.h"
#include "hw/misc/mps2-scc.h"
#include "hw/misc/mps2-fpgaio.h"
#include "hw/ssi/pl022.h"
#include "hw/i2c/arm_sbcon_i2c.h"
#include "hw/net/lan9118.h"
#include "net/net.h"
#include "hw/watchdog/cmsdk-apb-watchdog.h"
#include "hw/qdev-clock.h"
#include "qom/object.h"
typedef enum MPS2FPGAType {
FPGA_AN385,
FPGA_AN386,
FPGA_AN500,
FPGA_AN511,
} MPS2FPGAType;
struct MPS2MachineClass {
MachineClass parent;
MPS2FPGAType fpga_type;
uint32_t scc_id;
bool has_block_ram;
hwaddr ethernet_base;
hwaddr psram_base;
};
struct MPS2MachineState {
MachineState parent;
ARMv7MState armv7m;
MemoryRegion ssram1;
MemoryRegion ssram1_m;
MemoryRegion ssram23;
MemoryRegion ssram23_m;
MemoryRegion blockram;
MemoryRegion blockram_m1;
MemoryRegion blockram_m2;
MemoryRegion blockram_m3;
MemoryRegion sram;
/* FPGA APB subsystem */
MPS2SCC scc;
MPS2FPGAIO fpgaio;
/* CMSDK APB subsystem */
CMSDKAPBDualTimer dualtimer;
CMSDKAPBWatchdog watchdog;
CMSDKAPBTimer timer[2];
Clock *sysclk;
};
#define TYPE_MPS2_MACHINE "mps2"
#define TYPE_MPS2_AN385_MACHINE MACHINE_TYPE_NAME("mps2-an385")
#define TYPE_MPS2_AN386_MACHINE MACHINE_TYPE_NAME("mps2-an386")
#define TYPE_MPS2_AN500_MACHINE MACHINE_TYPE_NAME("mps2-an500")
#define TYPE_MPS2_AN511_MACHINE MACHINE_TYPE_NAME("mps2-an511")
OBJECT_DECLARE_TYPE(MPS2MachineState, MPS2MachineClass, MPS2_MACHINE)
/* Main SYSCLK frequency in Hz */
#define SYSCLK_FRQ 25000000
/* Initialize the auxiliary RAM region @mr and map it into
* the memory map at @base.
*/
static void make_ram(MemoryRegion *mr, const char *name,
hwaddr base, hwaddr size)
{
memory_region_init_ram(mr, NULL, name, size, &error_fatal);
memory_region_add_subregion(get_system_memory(), base, mr);
}
/* Create an alias of an entire original MemoryRegion @orig
* located at @base in the memory map.
*/
static void make_ram_alias(MemoryRegion *mr, const char *name,
MemoryRegion *orig, hwaddr base)
{
memory_region_init_alias(mr, NULL, name, orig, 0,
memory_region_size(orig));
memory_region_add_subregion(get_system_memory(), base, mr);
}
static void mps2_common_init(MachineState *machine)
{
MPS2MachineState *mms = MPS2_MACHINE(machine);
MPS2MachineClass *mmc = MPS2_MACHINE_GET_CLASS(machine);
MemoryRegion *system_memory = get_system_memory();
MachineClass *mc = MACHINE_GET_CLASS(machine);
DeviceState *armv7m, *sccdev;
int i;
if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
error_report("This board can only be used with CPU %s",
mc->default_cpu_type);
exit(1);
}
if (machine->ram_size != mc->default_ram_size) {
char *sz = size_to_str(mc->default_ram_size);
error_report("Invalid RAM size, should be %s", sz);
g_free(sz);
exit(EXIT_FAILURE);
}
/* This clock doesn't need migration because it is fixed-frequency */
mms->sysclk = clock_new(OBJECT(machine), "SYSCLK");
clock_set_hz(mms->sysclk, SYSCLK_FRQ);
/* The FPGA images have an odd combination of different RAMs,
* because in hardware they are different implementations and
* connected to different buses, giving varying performance/size
* tradeoffs. For QEMU they're all just RAM, though. We arbitrarily
* call the 16MB our "system memory", as it's the largest lump.
*
* AN385/AN386/AN511:
* 0x21000000 .. 0x21ffffff : PSRAM (16MB)
* AN385/AN386/AN500:
* 0x00000000 .. 0x003fffff : ZBT SSRAM1
* 0x00400000 .. 0x007fffff : mirror of ZBT SSRAM1
* 0x20000000 .. 0x203fffff : ZBT SSRAM 2&3
* 0x20400000 .. 0x207fffff : mirror of ZBT SSRAM 2&3
* AN385/AN386 only:
* 0x01000000 .. 0x01003fff : block RAM (16K)
* 0x01004000 .. 0x01007fff : mirror of above
* 0x01008000 .. 0x0100bfff : mirror of above
* 0x0100c000 .. 0x0100ffff : mirror of above
* AN511 only:
* 0x00000000 .. 0x0003ffff : FPGA block RAM
* 0x00400000 .. 0x007fffff : ZBT SSRAM1
* 0x20000000 .. 0x2001ffff : SRAM
* 0x20400000 .. 0x207fffff : ZBT SSRAM 2&3
* AN500 only:
* 0x60000000 .. 0x60ffffff : PSRAM (16MB)
*
* The AN385/AN386 has a feature where the lowest 16K can be mapped
* either to the bottom of the ZBT SSRAM1 or to the block RAM.
* This is of no use for QEMU so we don't implement it (as if
* zbt_boot_ctrl is always zero).
*/
memory_region_add_subregion(system_memory, mmc->psram_base, machine->ram);
if (mmc->has_block_ram) {
make_ram(&mms->blockram, "mps.blockram", 0x01000000, 0x4000);
make_ram_alias(&mms->blockram_m1, "mps.blockram_m1",
&mms->blockram, 0x01004000);
make_ram_alias(&mms->blockram_m2, "mps.blockram_m2",
&mms->blockram, 0x01008000);
make_ram_alias(&mms->blockram_m3, "mps.blockram_m3",
&mms->blockram, 0x0100c000);
}
switch (mmc->fpga_type) {
case FPGA_AN385:
case FPGA_AN386:
case FPGA_AN500:
make_ram(&mms->ssram1, "mps.ssram1", 0x0, 0x400000);
make_ram_alias(&mms->ssram1_m, "mps.ssram1_m", &mms->ssram1, 0x400000);
make_ram(&mms->ssram23, "mps.ssram23", 0x20000000, 0x400000);
make_ram_alias(&mms->ssram23_m, "mps.ssram23_m",
&mms->ssram23, 0x20400000);
break;
case FPGA_AN511:
make_ram(&mms->blockram, "mps.blockram", 0x0, 0x40000);
make_ram(&mms->ssram1, "mps.ssram1", 0x00400000, 0x00800000);
make_ram(&mms->sram, "mps.sram", 0x20000000, 0x20000);
make_ram(&mms->ssram23, "mps.ssram23", 0x20400000, 0x400000);
break;
default:
g_assert_not_reached();
}
object_initialize_child(OBJECT(mms), "armv7m", &mms->armv7m, TYPE_ARMV7M);
armv7m = DEVICE(&mms->armv7m);
switch (mmc->fpga_type) {
case FPGA_AN385:
case FPGA_AN386:
case FPGA_AN500:
qdev_prop_set_uint32(armv7m, "num-irq", 32);
break;
case FPGA_AN511:
qdev_prop_set_uint32(armv7m, "num-irq", 64);
break;
default:
g_assert_not_reached();
}
qdev_prop_set_string(armv7m, "cpu-type", machine->cpu_type);
qdev_prop_set_bit(armv7m, "enable-bitband", true);
object_property_set_link(OBJECT(&mms->armv7m), "memory",
OBJECT(system_memory), &error_abort);
sysbus_realize(SYS_BUS_DEVICE(&mms->armv7m), &error_fatal);
create_unimplemented_device("zbtsmram mirror", 0x00400000, 0x00400000);
create_unimplemented_device("RESERVED 1", 0x00800000, 0x00800000);
create_unimplemented_device("Block RAM", 0x01000000, 0x00010000);
create_unimplemented_device("RESERVED 2", 0x01010000, 0x1EFF0000);
create_unimplemented_device("RESERVED 3", 0x20800000, 0x00800000);
create_unimplemented_device("PSRAM", 0x21000000, 0x01000000);
/* These three ranges all cover multiple devices; we may implement
* some of them below (in which case the real device takes precedence
* over the unimplemented-region mapping).
*/
create_unimplemented_device("CMSDK APB peripheral region @0x40000000",
0x40000000, 0x00010000);
create_unimplemented_device("CMSDK AHB peripheral region @0x40010000",
0x40010000, 0x00010000);
create_unimplemented_device("Extra peripheral region @0x40020000",
0x40020000, 0x00010000);
create_unimplemented_device("RESERVED 4", 0x40030000, 0x001D0000);
create_unimplemented_device("VGA", 0x41000000, 0x0200000);
switch (mmc->fpga_type) {
case FPGA_AN385:
case FPGA_AN386:
case FPGA_AN500:
{
/* The overflow IRQs for UARTs 0, 1 and 2 are ORed together.
* Overflow for UARTs 4 and 5 doesn't trigger any interrupt.
*/
Object *orgate;
DeviceState *orgate_dev;
orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(orgate, "num-lines", 6, &error_fatal);
qdev_realize(DEVICE(orgate), NULL, &error_fatal);
orgate_dev = DEVICE(orgate);
qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12));
for (i = 0; i < 5; i++) {
static const hwaddr uartbase[] = {0x40004000, 0x40005000,
0x40006000, 0x40007000,
0x40009000};
/* RX irq number; TX irq is always one greater */
static const int uartirq[] = {0, 2, 4, 18, 20};
qemu_irq txovrint = NULL, rxovrint = NULL;
if (i < 3) {
txovrint = qdev_get_gpio_in(orgate_dev, i * 2);
rxovrint = qdev_get_gpio_in(orgate_dev, i * 2 + 1);
}
cmsdk_apb_uart_create(uartbase[i],
qdev_get_gpio_in(armv7m, uartirq[i] + 1),
qdev_get_gpio_in(armv7m, uartirq[i]),
txovrint, rxovrint,
NULL,
serial_hd(i), SYSCLK_FRQ);
}
break;
}
case FPGA_AN511:
{
/* The overflow IRQs for all UARTs are ORed together.
* Tx and Rx IRQs for each UART are ORed together.
*/
Object *orgate;
DeviceState *orgate_dev;
orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(orgate, "num-lines", 10, &error_fatal);
qdev_realize(DEVICE(orgate), NULL, &error_fatal);
orgate_dev = DEVICE(orgate);
qdev_connect_gpio_out(orgate_dev, 0, qdev_get_gpio_in(armv7m, 12));
for (i = 0; i < 5; i++) {
/* system irq numbers for the combined tx/rx for each UART */
static const int uart_txrx_irqno[] = {0, 2, 45, 46, 56};
static const hwaddr uartbase[] = {0x40004000, 0x40005000,
0x4002c000, 0x4002d000,
0x4002e000};
Object *txrx_orgate;
DeviceState *txrx_orgate_dev;
txrx_orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(txrx_orgate, "num-lines", 2, &error_fatal);
qdev_realize(DEVICE(txrx_orgate), NULL, &error_fatal);
txrx_orgate_dev = DEVICE(txrx_orgate);
qdev_connect_gpio_out(txrx_orgate_dev, 0,
qdev_get_gpio_in(armv7m, uart_txrx_irqno[i]));
cmsdk_apb_uart_create(uartbase[i],
qdev_get_gpio_in(txrx_orgate_dev, 0),
qdev_get_gpio_in(txrx_orgate_dev, 1),
qdev_get_gpio_in(orgate_dev, i * 2),
qdev_get_gpio_in(orgate_dev, i * 2 + 1),
NULL,
serial_hd(i), SYSCLK_FRQ);
}
break;
}
default:
g_assert_not_reached();
}
for (i = 0; i < 4; i++) {
static const hwaddr gpiobase[] = {0x40010000, 0x40011000,
0x40012000, 0x40013000};
create_unimplemented_device("cmsdk-ahb-gpio", gpiobase[i], 0x1000);
}
/* CMSDK APB subsystem */
for (i = 0; i < ARRAY_SIZE(mms->timer); i++) {
g_autofree char *name = g_strdup_printf("timer%d", i);
hwaddr base = 0x40000000 + i * 0x1000;
int irqno = 8 + i;
SysBusDevice *sbd;
object_initialize_child(OBJECT(mms), name, &mms->timer[i],
TYPE_CMSDK_APB_TIMER);
sbd = SYS_BUS_DEVICE(&mms->timer[i]);
qdev_connect_clock_in(DEVICE(&mms->timer[i]), "pclk", mms->sysclk);
sysbus_realize_and_unref(sbd, &error_fatal);
sysbus_mmio_map(sbd, 0, base);
sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(armv7m, irqno));
}
object_initialize_child(OBJECT(mms), "dualtimer", &mms->dualtimer,
TYPE_CMSDK_APB_DUALTIMER);
qdev_connect_clock_in(DEVICE(&mms->dualtimer), "TIMCLK", mms->sysclk);
sysbus_realize(SYS_BUS_DEVICE(&mms->dualtimer), &error_fatal);
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->dualtimer), 0,
qdev_get_gpio_in(armv7m, 10));
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->dualtimer), 0, 0x40002000);
object_initialize_child(OBJECT(mms), "watchdog", &mms->watchdog,
TYPE_CMSDK_APB_WATCHDOG);
qdev_connect_clock_in(DEVICE(&mms->watchdog), "WDOGCLK", mms->sysclk);
sysbus_realize(SYS_BUS_DEVICE(&mms->watchdog), &error_fatal);
sysbus_connect_irq(SYS_BUS_DEVICE(&mms->watchdog), 0,
qdev_get_gpio_in_named(armv7m, "NMI", 0));
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->watchdog), 0, 0x40008000);
/* FPGA APB subsystem */
object_initialize_child(OBJECT(mms), "scc", &mms->scc, TYPE_MPS2_SCC);
sccdev = DEVICE(&mms->scc);
qdev_prop_set_uint32(sccdev, "scc-cfg4", 0x2);
qdev_prop_set_uint32(sccdev, "scc-aid", 0x00200008);
qdev_prop_set_uint32(sccdev, "scc-id", mmc->scc_id);
/* All these FPGA images have the same OSCCLK configuration */
qdev_prop_set_uint32(sccdev, "len-oscclk", 3);
qdev_prop_set_uint32(sccdev, "oscclk[0]", 50000000);
qdev_prop_set_uint32(sccdev, "oscclk[1]", 24576000);
qdev_prop_set_uint32(sccdev, "oscclk[2]", 25000000);
sysbus_realize(SYS_BUS_DEVICE(&mms->scc), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(sccdev), 0, 0x4002f000);
object_initialize_child(OBJECT(mms), "fpgaio",
&mms->fpgaio, TYPE_MPS2_FPGAIO);
qdev_prop_set_uint32(DEVICE(&mms->fpgaio), "prescale-clk", 25000000);
sysbus_realize(SYS_BUS_DEVICE(&mms->fpgaio), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(&mms->fpgaio), 0, 0x40028000);
sysbus_create_simple(TYPE_PL022, 0x40025000, /* External ADC */
qdev_get_gpio_in(armv7m, 22));
for (i = 0; i < 2; i++) {
static const int spi_irqno[] = {11, 24};
static const hwaddr spibase[] = {0x40020000, /* APB */
0x40021000, /* LCD */
0x40026000, /* Shield0 */
0x40027000}; /* Shield1 */
DeviceState *orgate_dev;
Object *orgate;
int j;
orgate = object_new(TYPE_OR_IRQ);
object_property_set_int(orgate, "num-lines", 2, &error_fatal);
orgate_dev = DEVICE(orgate);
qdev_realize(orgate_dev, NULL, &error_fatal);
qdev_connect_gpio_out(orgate_dev, 0,
qdev_get_gpio_in(armv7m, spi_irqno[i]));
for (j = 0; j < 2; j++) {
sysbus_create_simple(TYPE_PL022, spibase[2 * i + j],
qdev_get_gpio_in(orgate_dev, j));
}
}
for (i = 0; i < 4; i++) {
static const hwaddr i2cbase[] = {0x40022000, /* Touch */
0x40023000, /* Audio */
0x40029000, /* Shield0 */
0x4002a000}; /* Shield1 */
sysbus_create_simple(TYPE_ARM_SBCON_I2C, i2cbase[i], NULL);
}
create_unimplemented_device("i2s", 0x40024000, 0x400);
/* In hardware this is a LAN9220; the LAN9118 is software compatible
* except that it doesn't support the checksum-offload feature.
*/
lan9118_init(&nd_table[0], mmc->ethernet_base,
qdev_get_gpio_in(armv7m,
mmc->fpga_type == FPGA_AN511 ? 47 : 13));
system_clock_scale = NANOSECONDS_PER_SECOND / SYSCLK_FRQ;
armv7m_load_kernel(ARM_CPU(first_cpu), machine->kernel_filename,
0x400000);
}
static void mps2_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->init = mps2_common_init;
mc->max_cpus = 1;
mc->default_ram_size = 16 * MiB;
mc->default_ram_id = "mps.ram";
}
static void mps2_an385_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc);
mc->desc = "ARM MPS2 with AN385 FPGA image for Cortex-M3";
mmc->fpga_type = FPGA_AN385;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3");
mmc->scc_id = 0x41043850;
mmc->psram_base = 0x21000000;
mmc->ethernet_base = 0x40200000;
mmc->has_block_ram = true;
}
static void mps2_an386_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc);
mc->desc = "ARM MPS2 with AN386 FPGA image for Cortex-M4";
mmc->fpga_type = FPGA_AN386;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m4");
mmc->scc_id = 0x41043860;
mmc->psram_base = 0x21000000;
mmc->ethernet_base = 0x40200000;
mmc->has_block_ram = true;
}
static void mps2_an500_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc);
mc->desc = "ARM MPS2 with AN500 FPGA image for Cortex-M7";
mmc->fpga_type = FPGA_AN500;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m7");
mmc->scc_id = 0x41045000;
mmc->psram_base = 0x60000000;
mmc->ethernet_base = 0xa0000000;
mmc->has_block_ram = false;
}
static void mps2_an511_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
MPS2MachineClass *mmc = MPS2_MACHINE_CLASS(oc);
mc->desc = "ARM MPS2 with AN511 DesignStart FPGA image for Cortex-M3";
mmc->fpga_type = FPGA_AN511;
mc->default_cpu_type = ARM_CPU_TYPE_NAME("cortex-m3");
mmc->scc_id = 0x41045110;
mmc->psram_base = 0x21000000;
mmc->ethernet_base = 0x40200000;
mmc->has_block_ram = false;
}
static const TypeInfo mps2_info = {
.name = TYPE_MPS2_MACHINE,
.parent = TYPE_MACHINE,
.abstract = true,
.instance_size = sizeof(MPS2MachineState),
.class_size = sizeof(MPS2MachineClass),
.class_init = mps2_class_init,
};
static const TypeInfo mps2_an385_info = {
.name = TYPE_MPS2_AN385_MACHINE,
.parent = TYPE_MPS2_MACHINE,
.class_init = mps2_an385_class_init,
};
static const TypeInfo mps2_an386_info = {
.name = TYPE_MPS2_AN386_MACHINE,
.parent = TYPE_MPS2_MACHINE,
.class_init = mps2_an386_class_init,
};
static const TypeInfo mps2_an500_info = {
.name = TYPE_MPS2_AN500_MACHINE,
.parent = TYPE_MPS2_MACHINE,
.class_init = mps2_an500_class_init,
};
static const TypeInfo mps2_an511_info = {
.name = TYPE_MPS2_AN511_MACHINE,
.parent = TYPE_MPS2_MACHINE,
.class_init = mps2_an511_class_init,
};
static void mps2_machine_init(void)
{
type_register_static(&mps2_info);
type_register_static(&mps2_an385_info);
type_register_static(&mps2_an386_info);
type_register_static(&mps2_an500_info);
type_register_static(&mps2_an511_info);
}
type_init(mps2_machine_init);
Reference in New Issue View Git Blame Copy Permalink