qemu-e2k/hw
Peter Maydell e8ca920f3d hw/arm/virt: Fix incorrect non-secure flash dtb node name
In the virt board with secure=on we put two nodes in the dtb
for flash devices: one for the secure-only flash, and one
for the non-secure flash. We get the reg properties for these
correct, but in the DT node name, which by convention includes
the base address of devices, we used the wrong address. Fix it.

Spotted by dtc, which will complain
Warning (unique_unit_address): /flash@0: duplicate unit-address (also used in node /secflash@0)
if you dump the dtb from QEMU with -machine dumpdtb=file.dtb
and then decompile it with dtc.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20220513131316.4081539-2-peter.maydell@linaro.org
2022-05-19 16:19:03 +01:00
..
9pfs virtio: drop name parameter for virtio_init() 2022-05-16 04:38:40 -04:00
acpi acpi/cxl: Introduce CFMWS structures in CEDT 2022-05-13 07:57:26 -04:00
adc hw/adc/zynq-xadc: Use qemu_irq typedef 2022-05-19 16:19:02 +01:00
alpha Remove qemu-common.h include from most units 2022-04-06 14:31:55 +02:00
arm hw/arm/virt: Fix incorrect non-secure flash dtb node name 2022-05-19 16:19:03 +01:00
audio introduce -audio as a replacement for -soundhw 2022-05-14 12:33:44 +02:00
avr Remove qemu-common.h include from most units 2022-04-06 14:31:55 +02:00
block virtio: add vhost support for virtio devices 2022-05-16 04:38:40 -04:00
char virtio: drop name parameter for virtio_init() 2022-05-16 04:38:40 -04:00
core hw/intc/arm_gicv3: Use correct number of priority bits for the CPU 2022-05-19 16:19:02 +01:00
cpu
cris
cxl hw/cxl/component Add a dumb HDM decoder handler 2022-05-13 07:57:26 -04:00
display hppa: Artist graphics driver fixes for HP-UX and keyboard fix in firmware boot console 2022-05-18 09:32:15 -07:00
dma Remove qemu-common.h include from most units 2022-04-06 14:31:55 +02:00
gpio hw/gpio/aspeed_gpio: Fix QOM pin property 2022-05-02 17:03:04 +02:00
hppa machine: use QAPI struct for boot configuration 2022-05-12 12:29:43 +02:00
hyperv util: rename qemu_*block() socket functions 2022-05-03 15:53:20 +04:00
i2c Use g_new() & friends where that makes obvious sense 2022-03-21 15:44:44 +01:00
i386 hw/i386/amd_iommu: Fix IOMMU event log encoding errors 2022-05-16 16:15:40 -04:00
ide MIPS patches queue 2022-03-09 09:13:39 +00:00
input virtio: add vhost support for virtio devices 2022-05-16 04:38:40 -04:00
intc hw/intc/arm_gicv3: Provide ich_num_aprs() 2022-05-19 16:19:02 +01:00
ipack qbus: Rename qbus_create_inplace() to qbus_init() 2021-09-30 13:42:10 +01:00
ipmi hw/isa: Inline and remove one-line isa_init_irq() 2022-03-08 19:38:17 +01:00
isa Warn user if the vga flag is passed but no vga device is created 2022-05-09 08:21:14 +02:00
m68k hw: Add compat machines for 7.1 2022-04-20 09:36:24 +02:00
mem mem/cxl_type3: Add read and write functions for associated hostmem. 2022-05-13 07:57:26 -04:00
microblaze Remove qemu-common.h include from most units 2022-04-06 14:31:55 +02:00
mips Warn user if the vga flag is passed but no vga device is created 2022-05-09 08:21:14 +02:00
misc lasi: move from hw/hppa to hw/misc 2022-05-08 18:52:37 +01:00
net tulip: Assign default MAC address if not specified 2022-05-17 16:48:23 +08:00
nios2 hw/nios2: Machine with a Vectored Interrupt Controller 2022-04-26 08:17:05 -07:00
nubus qbus: Rename qbus_create_inplace() to qbus_init() 2021-09-30 13:42:10 +01:00
nvme Clean up header guards that don't match their file name 2022-05-11 16:49:06 +02:00
nvram machine: use QAPI struct for boot configuration 2022-05-12 12:29:43 +02:00
openrisc hw/openrisc: use right OMPIC size variable 2022-05-15 10:33:01 +09:00
pci pci/pcie_port: Add pci_find_port_by_pn() 2022-05-13 07:57:26 -04:00
pci-bridge CXL/cxl_component: Add cxl_get_hb_cstate() 2022-05-13 07:57:26 -04:00
pci-host hw/pci-host/gpex-acpi: Add support for dsdt construction for pxb-cxl 2022-05-13 07:57:26 -04:00
pcmcia
ppc machine: use QAPI struct for boot configuration 2022-05-12 12:29:43 +02:00
rdma hw/pvrdma: Some cosmetic fixes 2022-04-26 12:25:14 +02:00
remote QIOChannel: Add flags on io_writev and introduce io_flush callback 2022-05-16 13:56:24 +01:00
riscv hw/riscv: Enable TPM backends 2022-04-29 10:48:48 +10:00
rtc Replace qemu_gettimeofday() with g_get_real_time() 2022-04-06 10:50:37 +02:00
rx hw/rx: rx-gdbsim DTB load address aligned of 16byte. 2022-04-21 10:06:42 -07:00
s390x machine: use QAPI struct for boot configuration 2022-05-12 12:29:43 +02:00
scsi virtio: add vhost support for virtio devices 2022-05-16 04:38:40 -04:00
sd Remove qemu-common.h include from most units 2022-04-06 14:31:55 +02:00
sensor hw/sensor: add Renesas raa228000 device 2022-03-08 18:46:48 +01:00
sh4 Use g_new() & friends where that makes obvious sense 2022-03-21 15:44:44 +01:00
smbios hw/smbios: Add table 4 parameter, "processor-id" 2022-03-06 05:28:55 -05:00
sparc machine: make memory-backend a link property 2022-05-12 12:29:44 +02:00
sparc64 machine: use QAPI struct for boot configuration 2022-05-12 12:29:43 +02:00
ssi aspeed/smc: Add AST1030 support 2022-05-02 17:03:03 +02:00
timer aspeed/timer: Add AST1030 support 2022-05-02 17:03:03 +02:00
tpm Replace qemu_real_host_page variables with inlined functions 2022-04-06 10:50:38 +02:00
tricore hw/tricore: fix inclusion of tricore_testboard 2021-07-20 20:10:21 +02:00
usb Clean up header guards that don't match their file name 2022-05-11 16:49:06 +02:00
vfio linux-headers: Update to v5.18-rc6 2022-05-13 08:20:11 -06:00
virtio vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request() 2022-05-16 16:15:41 -04:00
watchdog aspeed/wdt: Add AST1030 support 2022-05-02 17:03:03 +02:00
xen hw/xen/xen_pt: Resolve igd_passthrough_isa_bridge_create() indirection 2022-05-12 12:07:06 +02:00
xenpv Warn user if the vga flag is passed but no vga device is created 2022-05-09 08:21:14 +02:00
xtensa hw/xtensa: fix reset value of MIROUT register of MX PIC 2022-05-06 15:27:40 -07:00
Kconfig hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) 2022-05-13 06:13:35 -04:00
meson.build hw/cxl/component: Introduce CXL components (8.1.x, 8.2.5) 2022-05-13 06:13:35 -04:00