OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
e8ee827ffd
qemu-e2k/hw/arm/xilinx_zynq.c
Philippe Mathieu-Daudé 68a5827b80 hw/arm/xilinx_zynq: Wire FIQ between CPU <> GIC 
Similarly to commits dadbb58f59..5ae79fe825 for other ARM boards,
connect FIQ output of the GIC CPU interfaces to the CPU.

Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240130152548.17855-1-philmd@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-02-15 11:30:43 +00:00

384 lines
13 KiB
C
Raw Blame History

/*
* Xilinx Zynq Baseboard System emulation.
*
* Copyright (c) 2010 Xilinx.
* Copyright (c) 2012 Peter A.G. Crosthwaite (peter.croshtwaite@petalogix.com)
* Copyright (c) 2012 Petalogix Pty Ltd.
* Written by Haibing Ma
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu/units.h"
#include "qapi/error.h"
#include "hw/sysbus.h"
#include "hw/arm/boot.h"
#include "net/net.h"
#include "sysemu/sysemu.h"
#include "hw/boards.h"
#include "hw/block/flash.h"
#include "hw/loader.h"
#include "hw/adc/zynq-xadc.h"
#include "hw/ssi/ssi.h"
#include "hw/usb/chipidea.h"
#include "qemu/error-report.h"
#include "hw/sd/sdhci.h"
#include "hw/char/cadence_uart.h"
#include "hw/net/cadence_gem.h"
#include "hw/cpu/a9mpcore.h"
#include "hw/qdev-clock.h"
#include "sysemu/reset.h"
#include "qom/object.h"
#include "exec/tswap.h"
#include "target/arm/cpu-qom.h"
#define TYPE_ZYNQ_MACHINE MACHINE_TYPE_NAME("xilinx-zynq-a9")
OBJECT_DECLARE_SIMPLE_TYPE(ZynqMachineState, ZYNQ_MACHINE)
/* board base frequency: 33.333333 MHz */
#define PS_CLK_FREQUENCY (100 * 1000 * 1000 / 3)
#define NUM_SPI_FLASHES 4
#define NUM_QSPI_FLASHES 2
#define NUM_QSPI_BUSSES 2
#define FLASH_SIZE (64 * 1024 * 1024)
#define FLASH_SECTOR_SIZE (128 * 1024)
#define IRQ_OFFSET 32 /* pic interrupts start from index 32 */
#define MPCORE_PERIPHBASE 0xF8F00000
#define ZYNQ_BOARD_MIDR 0x413FC090
static const int dma_irqs[8] = {
46, 47, 48, 49, 72, 73, 74, 75
};
#define BOARD_SETUP_ADDR 0x100
#define SLCR_LOCK_OFFSET 0x004
#define SLCR_UNLOCK_OFFSET 0x008
#define SLCR_ARM_PLL_OFFSET 0x100
#define SLCR_XILINX_UNLOCK_KEY 0xdf0d
#define SLCR_XILINX_LOCK_KEY 0x767b
#define ZYNQ_SDHCI_CAPABILITIES 0x69ec0080 /* Datasheet: UG585 (v1.12.1) */
#define ARMV7_IMM16(x) (extract32((x), 0, 12) | \
extract32((x), 12, 4) << 16)
/* Write immediate val to address r0 + addr. r0 should contain base offset
* of the SLCR block. Clobbers r1.
*/
#define SLCR_WRITE(addr, val) \
0xe3001000 + ARMV7_IMM16(extract32((val), 0, 16)), /* movw r1 ... */ \
0xe3401000 + ARMV7_IMM16(extract32((val), 16, 16)), /* movt r1 ... */ \
0xe5801000 + (addr)
struct ZynqMachineState {
MachineState parent;
Clock *ps_clk;
};
static void zynq_write_board_setup(ARMCPU *cpu,
const struct arm_boot_info *info)
{
int n;
uint32_t board_setup_blob[] = {
0xe3a004f8, /* mov r0, #0xf8000000 */
SLCR_WRITE(SLCR_UNLOCK_OFFSET, SLCR_XILINX_UNLOCK_KEY),
SLCR_WRITE(SLCR_ARM_PLL_OFFSET, 0x00014008),
SLCR_WRITE(SLCR_LOCK_OFFSET, SLCR_XILINX_LOCK_KEY),
0xe12fff1e, /* bx lr */
};
for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) {
board_setup_blob[n] = tswap32(board_setup_blob[n]);
}
rom_add_blob_fixed("board-setup", board_setup_blob,
sizeof(board_setup_blob), BOARD_SETUP_ADDR);
}
static struct arm_boot_info zynq_binfo = {};
static void gem_init(uint32_t base, qemu_irq irq)
{
DeviceState *dev;
SysBusDevice *s;
dev = qdev_new(TYPE_CADENCE_GEM);
qemu_configure_nic_device(dev, true, NULL);
object_property_set_int(OBJECT(dev), "phy-addr", 7, &error_abort);
s = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(s, &error_fatal);
sysbus_mmio_map(s, 0, base);
sysbus_connect_irq(s, 0, irq);
}
static inline int zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq,
bool is_qspi, int unit0)
{
int unit = unit0;
DeviceState *dev;
SysBusDevice *busdev;
SSIBus *spi;
DeviceState *flash_dev;
int i, j;
int num_busses = is_qspi ? NUM_QSPI_BUSSES : 1;
int num_ss = is_qspi ? NUM_QSPI_FLASHES : NUM_SPI_FLASHES;
dev = qdev_new(is_qspi ? "xlnx.ps7-qspi" : "xlnx.ps7-spi");
qdev_prop_set_uint8(dev, "num-txrx-bytes", is_qspi ? 4 : 1);
qdev_prop_set_uint8(dev, "num-ss-bits", num_ss);
qdev_prop_set_uint8(dev, "num-busses", num_busses);
busdev = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(busdev, &error_fatal);
sysbus_mmio_map(busdev, 0, base_addr);
if (is_qspi) {
sysbus_mmio_map(busdev, 1, 0xFC000000);
}
sysbus_connect_irq(busdev, 0, irq);
for (i = 0; i < num_busses; ++i) {
char bus_name[16];
qemu_irq cs_line;
snprintf(bus_name, 16, "spi%d", i);
spi = (SSIBus *)qdev_get_child_bus(dev, bus_name);
for (j = 0; j < num_ss; ++j) {
DriveInfo *dinfo = drive_get(IF_MTD, 0, unit++);
flash_dev = qdev_new("n25q128");
if (dinfo) {
qdev_prop_set_drive_err(flash_dev, "drive",
blk_by_legacy_dinfo(dinfo),
&error_fatal);
}
qdev_prop_set_uint8(flash_dev, "cs", j);
qdev_realize_and_unref(flash_dev, BUS(spi), &error_fatal);
cs_line = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
sysbus_connect_irq(busdev, i * num_ss + j + 1, cs_line);
}
}
return unit;
}
static void zynq_init(MachineState *machine)
{
ZynqMachineState *zynq_machine = ZYNQ_MACHINE(machine);
ARMCPU *cpu;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
DeviceState *dev, *slcr;
SysBusDevice *busdev;
qemu_irq pic[64];
int n;
/* max 2GB ram */
if (machine->ram_size > 2 * GiB) {
error_report("RAM size more than 2 GiB is not supported");
exit(EXIT_FAILURE);
}
cpu = ARM_CPU(object_new(machine->cpu_type));
/* By default A9 CPUs have EL3 enabled. This board does not
* currently support EL3 so the CPU EL3 property is disabled before
* realization.
*/
if (object_property_find(OBJECT(cpu), "has_el3")) {
object_property_set_bool(OBJECT(cpu), "has_el3", false, &error_fatal);
}
object_property_set_int(OBJECT(cpu), "midr", ZYNQ_BOARD_MIDR,
&error_fatal);
object_property_set_int(OBJECT(cpu), "reset-cbar", MPCORE_PERIPHBASE,
&error_fatal);
qdev_realize(DEVICE(cpu), NULL, &error_fatal);
/* DDR remapped to address zero. */
memory_region_add_subregion(address_space_mem, 0, machine->ram);
/* 256K of on-chip memory */
memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 * KiB,
&error_fatal);
memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram);
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
/* AMD */
pflash_cfi02_register(0xe2000000, "zynq.pflash", FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
FLASH_SECTOR_SIZE, 1,
1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa,
0);
/* Create the main clock source, and feed slcr with it */
zynq_machine->ps_clk = CLOCK(object_new(TYPE_CLOCK));
object_property_add_child(OBJECT(zynq_machine), "ps_clk",
OBJECT(zynq_machine->ps_clk));
object_unref(OBJECT(zynq_machine->ps_clk));
clock_set_hz(zynq_machine->ps_clk, PS_CLK_FREQUENCY);
/* Create slcr, keep a pointer to connect clocks */
slcr = qdev_new("xilinx-zynq_slcr");
qdev_connect_clock_in(slcr, "ps_clk", zynq_machine->ps_clk);
sysbus_realize_and_unref(SYS_BUS_DEVICE(slcr), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(slcr), 0, 0xF8000000);
dev = qdev_new(TYPE_A9MPCORE_PRIV);
qdev_prop_set_uint32(dev, "num-cpu", 1);
busdev = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(busdev, &error_fatal);
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
sysbus_connect_irq(busdev, 0,
qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ));
sysbus_connect_irq(busdev, 1,
qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ));
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
n = zynq_init_spi_flashes(0xE0006000, pic[58 - IRQ_OFFSET], false, 0);
n = zynq_init_spi_flashes(0xE0007000, pic[81 - IRQ_OFFSET], false, n);
n = zynq_init_spi_flashes(0xE000D000, pic[51 - IRQ_OFFSET], true, n);
sysbus_create_simple(TYPE_CHIPIDEA, 0xE0002000, pic[53 - IRQ_OFFSET]);
sysbus_create_simple(TYPE_CHIPIDEA, 0xE0003000, pic[76 - IRQ_OFFSET]);
dev = qdev_new(TYPE_CADENCE_UART);
busdev = SYS_BUS_DEVICE(dev);
qdev_prop_set_chr(dev, "chardev", serial_hd(0));
qdev_connect_clock_in(dev, "refclk",
qdev_get_clock_out(slcr, "uart0_ref_clk"));
sysbus_realize_and_unref(busdev, &error_fatal);
sysbus_mmio_map(busdev, 0, 0xE0000000);
sysbus_connect_irq(busdev, 0, pic[59 - IRQ_OFFSET]);
dev = qdev_new(TYPE_CADENCE_UART);
busdev = SYS_BUS_DEVICE(dev);
qdev_prop_set_chr(dev, "chardev", serial_hd(1));
qdev_connect_clock_in(dev, "refclk",
qdev_get_clock_out(slcr, "uart1_ref_clk"));
sysbus_realize_and_unref(busdev, &error_fatal);
sysbus_mmio_map(busdev, 0, 0xE0001000);
sysbus_connect_irq(busdev, 0, pic[82 - IRQ_OFFSET]);
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
sysbus_create_varargs("cadence_ttc", 0xF8002000,
pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL);
gem_init(0xE000B000, pic[54 - IRQ_OFFSET]);
gem_init(0xE000C000, pic[77 - IRQ_OFFSET]);
for (n = 0; n < 2; n++) {
int hci_irq = n ? 79 : 56;
hwaddr hci_addr = n ? 0xE0101000 : 0xE0100000;
DriveInfo *di;
BlockBackend *blk;
DeviceState *carddev;
/* Compatible with:
* - SD Host Controller Specification Version 2.0 Part A2
* - SDIO Specification Version 2.0
* - MMC Specification Version 3.31
*/
dev = qdev_new(TYPE_SYSBUS_SDHCI);
qdev_prop_set_uint8(dev, "sd-spec-version", 2);
qdev_prop_set_uint64(dev, "capareg", ZYNQ_SDHCI_CAPABILITIES);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, hci_addr);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[hci_irq - IRQ_OFFSET]);
di = drive_get(IF_SD, 0, n);
blk = di ? blk_by_legacy_dinfo(di) : NULL;
carddev = qdev_new(TYPE_SD_CARD);
qdev_prop_set_drive_err(carddev, "drive", blk, &error_fatal);
qdev_realize_and_unref(carddev, qdev_get_child_bus(dev, "sd-bus"),
&error_fatal);
}
dev = qdev_new(TYPE_ZYNQ_XADC);
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[39-IRQ_OFFSET]);
dev = qdev_new("pl330");
object_property_set_link(OBJECT(dev), "memory",
OBJECT(address_space_mem),
&error_fatal);
qdev_prop_set_uint8(dev, "num_chnls", 8);
qdev_prop_set_uint8(dev, "num_periph_req", 4);
qdev_prop_set_uint8(dev, "num_events", 16);
qdev_prop_set_uint8(dev, "data_width", 64);
qdev_prop_set_uint8(dev, "wr_cap", 8);
qdev_prop_set_uint8(dev, "wr_q_dep", 16);
qdev_prop_set_uint8(dev, "rd_cap", 8);
qdev_prop_set_uint8(dev, "rd_q_dep", 16);
qdev_prop_set_uint16(dev, "data_buffer_dep", 256);
busdev = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(busdev, &error_fatal);
sysbus_mmio_map(busdev, 0, 0xF8003000);
sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
for (n = 0; n < ARRAY_SIZE(dma_irqs); ++n) { /* event irqs */
sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
}
dev = qdev_new("xlnx.ps7-dev-cfg");
busdev = SYS_BUS_DEVICE(dev);
sysbus_realize_and_unref(busdev, &error_fatal);
sysbus_connect_irq(busdev, 0, pic[40 - IRQ_OFFSET]);
sysbus_mmio_map(busdev, 0, 0xF8007000);
zynq_binfo.ram_size = machine->ram_size;
zynq_binfo.board_id = 0xd32;
zynq_binfo.loader_start = 0;
zynq_binfo.board_setup_addr = BOARD_SETUP_ADDR;
zynq_binfo.write_board_setup = zynq_write_board_setup;
arm_load_kernel(cpu, machine, &zynq_binfo);
}
static void zynq_machine_class_init(ObjectClass *oc, void *data)
{
static const char * const valid_cpu_types[] = {
ARM_CPU_TYPE_NAME("cortex-a9"),
NULL
};
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Xilinx Zynq Platform Baseboard for Cortex-A9";
mc->init = zynq_init;
mc->max_cpus = 1;
mc->no_sdcard = 1;
mc->ignore_memory_transaction_failures = true;
mc->valid_cpu_types = valid_cpu_types;
mc->default_ram_id = "zynq.ext_ram";
}
static const TypeInfo zynq_machine_type = {
.name = TYPE_ZYNQ_MACHINE,
.parent = TYPE_MACHINE,
.class_init = zynq_machine_class_init,
.instance_size = sizeof(ZynqMachineState),
};
static void zynq_machine_register_types(void)
{
type_register_static(&zynq_machine_type);
}
type_init(zynq_machine_register_types)
Reference in New Issue View Git Blame Copy Permalink