qemu-e2k/include/hw/pci/pci_bridge.h
Laurent Vivier efe84f03ea qtest/libqos: add a function to initialize secondary PCI buses
Scan the PCI devices to find bridge and set PCI_SECONDARY_BUS and
PCI_SUBORDINATE_BUS (algorithm from seabios)

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20211208130350.10178-2-lvivier@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-12-15 08:07:04 +01:00

167 lines
6.1 KiB
C

/*
* QEMU PCI bridge
*
* Copyright (c) 2004 Fabrice Bellard
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* split out pci bus specific stuff from pci.[hc] to pci_bridge.[hc]
* Copyright (c) 2009 Isaku Yamahata <yamahata at valinux co jp>
* VA Linux Systems Japan K.K.
*
*/
#ifndef QEMU_PCI_BRIDGE_H
#define QEMU_PCI_BRIDGE_H
#include "hw/pci/pci.h"
#include "hw/pci/pci_bus.h"
#include "qom/object.h"
typedef struct PCIBridgeWindows PCIBridgeWindows;
/*
* Aliases for each of the address space windows that the bridge
* can forward. Mapped into the bridge's parent's address space,
* as subregions.
*/
struct PCIBridgeWindows {
MemoryRegion alias_pref_mem;
MemoryRegion alias_mem;
MemoryRegion alias_io;
/*
* When bridge control VGA forwarding is enabled, bridges will
* provide positive decode on the PCI VGA defined I/O port and
* MMIO ranges. When enabled forwarding is only qualified on the
* I/O and memory enable bits in the bridge command register.
*/
MemoryRegion alias_vga[QEMU_PCI_VGA_NUM_REGIONS];
};
#define TYPE_PCI_BRIDGE "base-pci-bridge"
OBJECT_DECLARE_SIMPLE_TYPE(PCIBridge, PCI_BRIDGE)
struct PCIBridge {
/*< private >*/
PCIDevice parent_obj;
/*< public >*/
/* private member */
PCIBus sec_bus;
/*
* Memory regions for the bridge's address spaces. These regions are not
* directly added to system_memory/system_io or its descendants.
* Bridge's secondary bus points to these, so that devices
* under the bridge see these regions as its address spaces.
* The regions are as large as the entire address space -
* they don't take into account any windows.
*/
MemoryRegion address_space_mem;
MemoryRegion address_space_io;
PCIBridgeWindows *windows;
pci_map_irq_fn map_irq;
const char *bus_name;
};
#define PCI_BRIDGE_DEV_PROP_CHASSIS_NR "chassis_nr"
#define PCI_BRIDGE_DEV_PROP_MSI "msi"
#define PCI_BRIDGE_DEV_PROP_SHPC "shpc"
int pci_bridge_ssvid_init(PCIDevice *dev, uint8_t offset,
uint16_t svid, uint16_t ssid,
Error **errp);
PCIDevice *pci_bridge_get_device(PCIBus *bus);
PCIBus *pci_bridge_get_sec_bus(PCIBridge *br);
pcibus_t pci_bridge_get_base(const PCIDevice *bridge, uint8_t type);
pcibus_t pci_bridge_get_limit(const PCIDevice *bridge, uint8_t type);
void pci_bridge_update_mappings(PCIBridge *br);
void pci_bridge_write_config(PCIDevice *d,
uint32_t address, uint32_t val, int len);
void pci_bridge_disable_base_limit(PCIDevice *dev);
void pci_bridge_reset(DeviceState *qdev);
void pci_bridge_initfn(PCIDevice *pci_dev, const char *typename);
void pci_bridge_exitfn(PCIDevice *pci_dev);
void pci_bridge_dev_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp);
void pci_bridge_dev_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp);
void pci_bridge_dev_unplug_request_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp);
/*
* before qdev initialization(qdev_init()), this function sets bus_name and
* map_irq callback which are necessary for pci_bridge_initfn() to
* initialize bus.
*/
void pci_bridge_map_irq(PCIBridge *br, const char* bus_name,
pci_map_irq_fn map_irq);
/* TODO: add this define to pci_regs.h in linux and then in qemu. */
#define PCI_BRIDGE_CTL_VGA_16BIT 0x10 /* VGA 16-bit decode */
#define PCI_BRIDGE_CTL_DISCARD 0x100 /* Primary discard timer */
#define PCI_BRIDGE_CTL_SEC_DISCARD 0x200 /* Secondary discard timer */
#define PCI_BRIDGE_CTL_DISCARD_STATUS 0x400 /* Discard timer status */
#define PCI_BRIDGE_CTL_DISCARD_SERR 0x800 /* Discard timer SERR# enable */
typedef struct PCIBridgeQemuCap {
uint8_t id; /* Standard PCI capability header field */
uint8_t next; /* Standard PCI capability header field */
uint8_t len; /* Standard PCI vendor-specific capability header field */
uint8_t type; /* Red Hat vendor-specific capability type.
Types are defined with REDHAT_PCI_CAP_ prefix */
uint32_t bus_res; /* Minimum number of buses to reserve */
uint64_t io; /* IO space to reserve */
uint32_t mem; /* Non-prefetchable memory to reserve */
/* At most one of the following two fields may be set to a value
* different from -1 */
uint32_t mem_pref_32; /* Prefetchable memory to reserve (32-bit MMIO) */
uint64_t mem_pref_64; /* Prefetchable memory to reserve (64-bit MMIO) */
} PCIBridgeQemuCap;
#define REDHAT_PCI_CAP_TYPE_OFFSET 3
#define REDHAT_PCI_CAP_RESOURCE_RESERVE 1
/*
* PCI BUS/IO/MEM/PREFMEM additional resources recorded as a
* capability in PCI configuration space to reserve on firmware init.
*/
typedef struct PCIResReserve {
uint32_t bus;
uint64_t io;
uint64_t mem_non_pref;
uint64_t mem_pref_32;
uint64_t mem_pref_64;
} PCIResReserve;
#define REDHAT_PCI_CAP_RES_RESERVE_BUS_RES 4
#define REDHAT_PCI_CAP_RES_RESERVE_IO 8
#define REDHAT_PCI_CAP_RES_RESERVE_MEM 16
#define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_32 20
#define REDHAT_PCI_CAP_RES_RESERVE_PREF_MEM_64 24
#define REDHAT_PCI_CAP_RES_RESERVE_CAP_SIZE 32
int pci_bridge_qemu_reserve_cap_init(PCIDevice *dev, int cap_offset,
PCIResReserve res_reserve, Error **errp);
#endif /* QEMU_PCI_BRIDGE_H */