OpenE2K/qemu-e2k
13
4
Fork 0
Code Issues 4 Pull Requests Projects 2 Releases Activity
f108934fca
qemu-e2k/tests/libqos/e1000e.c
Thomas Huth 4d81d77efd tests/libqos/e1000e: Make e1000e libqos functions independent from global_qtest 
libqos library functions should never depend on functions (like memread(),
memwrite() or clock_step()) that require global_qtest to be set, since
library functions might get used in qtests that track multiple states, too.
Thus let's replace the global_qtest-related functions with their independent
counterparts.

Message-Id: <20190904130047.25808-3-thuth@redhat.com>
Reviewed-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-09-05 13:18:52 +02:00

267 lines
8.6 KiB
C
Raw Blame History

/*
* libqos driver framework
*
* Copyright (c) 2018 Emanuele Giuseppe Esposito <e.emanuelegiuseppe@gmail.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License version 2 as published by the Free Software Foundation.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>
*/
#include "qemu/osdep.h"
#include "libqtest.h"
#include "libqos/pci-pc.h"
#include "qemu/sockets.h"
#include "qemu/iov.h"
#include "qemu/module.h"
#include "qemu/bitops.h"
#include "libqos/malloc.h"
#include "libqos/qgraph.h"
#include "e1000e.h"
#define E1000E_IMS (0x00d0)
#define E1000E_STATUS (0x0008)
#define E1000E_STATUS_LU BIT(1)
#define E1000E_STATUS_ASDV1000 BIT(9)
#define E1000E_CTRL (0x0000)
#define E1000E_CTRL_RESET BIT(26)
#define E1000E_RCTL (0x0100)
#define E1000E_RCTL_EN BIT(1)
#define E1000E_RCTL_UPE BIT(3)
#define E1000E_RCTL_MPE BIT(4)
#define E1000E_RFCTL (0x5008)
#define E1000E_RFCTL_EXTEN BIT(15)
#define E1000E_TCTL (0x0400)
#define E1000E_TCTL_EN BIT(1)
#define E1000E_CTRL_EXT (0x0018)
#define E1000E_CTRL_EXT_DRV_LOAD BIT(28)
#define E1000E_CTRL_EXT_TXLSFLOW BIT(22)
#define E1000E_IVAR (0x00E4)
#define E1000E_IVAR_TEST_CFG ((E1000E_RX0_MSG_ID << 0) | BIT(3) | \
(E1000E_TX0_MSG_ID << 8) | BIT(11) | \
(E1000E_OTHER_MSG_ID << 16) | BIT(19) | \
BIT(31))
#define E1000E_RING_LEN (0x1000)
#define E1000E_TDBAL (0x3800)
#define E1000E_TDBAH (0x3804)
#define E1000E_TDH (0x3810)
#define E1000E_RDBAL (0x2800)
#define E1000E_RDBAH (0x2804)
#define E1000E_RDH (0x2810)
#define E1000E_TXD_LEN (16)
#define E1000E_RXD_LEN (16)
static void e1000e_macreg_write(QE1000E *d, uint32_t reg, uint32_t val)
{
QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
qpci_io_writel(&d_pci->pci_dev, d_pci->mac_regs, reg, val);
}
static uint32_t e1000e_macreg_read(QE1000E *d, uint32_t reg)
{
QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
return qpci_io_readl(&d_pci->pci_dev, d_pci->mac_regs, reg);
}
void e1000e_tx_ring_push(QE1000E *d, void *descr)
{
QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
uint32_t tail = e1000e_macreg_read(d, E1000E_TDT);
uint32_t len = e1000e_macreg_read(d, E1000E_TDLEN) / E1000E_TXD_LEN;
qtest_memwrite(d_pci->pci_dev.bus->qts, d->tx_ring + tail * E1000E_TXD_LEN,
descr, E1000E_TXD_LEN);
e1000e_macreg_write(d, E1000E_TDT, (tail + 1) % len);
/* Read WB data for the packet transmitted */
qtest_memread(d_pci->pci_dev.bus->qts, d->tx_ring + tail * E1000E_TXD_LEN,
descr, E1000E_TXD_LEN);
}
void e1000e_rx_ring_push(QE1000E *d, void *descr)
{
QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
uint32_t tail = e1000e_macreg_read(d, E1000E_RDT);
uint32_t len = e1000e_macreg_read(d, E1000E_RDLEN) / E1000E_RXD_LEN;
qtest_memwrite(d_pci->pci_dev.bus->qts, d->rx_ring + tail * E1000E_RXD_LEN,
descr, E1000E_RXD_LEN);
e1000e_macreg_write(d, E1000E_RDT, (tail + 1) % len);
/* Read WB data for the packet received */
qtest_memread(d_pci->pci_dev.bus->qts, d->rx_ring + tail * E1000E_RXD_LEN,
descr, E1000E_RXD_LEN);
}
static void e1000e_foreach_callback(QPCIDevice *dev, int devfn, void *data)
{
QPCIDevice *res = data;
memcpy(res, dev, sizeof(QPCIDevice));
g_free(dev);
}
void e1000e_wait_isr(QE1000E *d, uint16_t msg_id)
{
QE1000E_PCI *d_pci = container_of(d, QE1000E_PCI, e1000e);
guint64 end_time = g_get_monotonic_time() + 5 * G_TIME_SPAN_SECOND;
do {
if (qpci_msix_pending(&d_pci->pci_dev, msg_id)) {
return;
}
qtest_clock_step(d_pci->pci_dev.bus->qts, 10000);
} while (g_get_monotonic_time() < end_time);
g_error("Timeout expired");
}
static void e1000e_pci_destructor(QOSGraphObject *obj)
{
QE1000E_PCI *epci = (QE1000E_PCI *) obj;
qpci_iounmap(&epci->pci_dev, epci->mac_regs);
qpci_msix_disable(&epci->pci_dev);
}
static void e1000e_pci_start_hw(QOSGraphObject *obj)
{
QE1000E_PCI *d = (QE1000E_PCI *) obj;
uint32_t val;
/* Enable the device */
qpci_device_enable(&d->pci_dev);
/* Reset the device */
val = e1000e_macreg_read(&d->e1000e, E1000E_CTRL);
e1000e_macreg_write(&d->e1000e, E1000E_CTRL, val | E1000E_CTRL_RESET);
/* Enable and configure MSI-X */
qpci_msix_enable(&d->pci_dev);
e1000e_macreg_write(&d->e1000e, E1000E_IVAR, E1000E_IVAR_TEST_CFG);
/* Check the device status - link and speed */
val = e1000e_macreg_read(&d->e1000e, E1000E_STATUS);
g_assert_cmphex(val & (E1000E_STATUS_LU | E1000E_STATUS_ASDV1000),
==, E1000E_STATUS_LU | E1000E_STATUS_ASDV1000);
/* Initialize TX/RX logic */
e1000e_macreg_write(&d->e1000e, E1000E_RCTL, 0);
e1000e_macreg_write(&d->e1000e, E1000E_TCTL, 0);
/* Notify the device that the driver is ready */
val = e1000e_macreg_read(&d->e1000e, E1000E_CTRL_EXT);
e1000e_macreg_write(&d->e1000e, E1000E_CTRL_EXT,
val | E1000E_CTRL_EXT_DRV_LOAD | E1000E_CTRL_EXT_TXLSFLOW);
e1000e_macreg_write(&d->e1000e, E1000E_TDBAL,
(uint32_t) d->e1000e.tx_ring);
e1000e_macreg_write(&d->e1000e, E1000E_TDBAH,
(uint32_t) (d->e1000e.tx_ring >> 32));
e1000e_macreg_write(&d->e1000e, E1000E_TDLEN, E1000E_RING_LEN);
e1000e_macreg_write(&d->e1000e, E1000E_TDT, 0);
e1000e_macreg_write(&d->e1000e, E1000E_TDH, 0);
/* Enable transmit */
e1000e_macreg_write(&d->e1000e, E1000E_TCTL, E1000E_TCTL_EN);
e1000e_macreg_write(&d->e1000e, E1000E_RDBAL,
(uint32_t)d->e1000e.rx_ring);
e1000e_macreg_write(&d->e1000e, E1000E_RDBAH,
(uint32_t)(d->e1000e.rx_ring >> 32));
e1000e_macreg_write(&d->e1000e, E1000E_RDLEN, E1000E_RING_LEN);
e1000e_macreg_write(&d->e1000e, E1000E_RDT, 0);
e1000e_macreg_write(&d->e1000e, E1000E_RDH, 0);
/* Enable receive */
e1000e_macreg_write(&d->e1000e, E1000E_RFCTL, E1000E_RFCTL_EXTEN);
e1000e_macreg_write(&d->e1000e, E1000E_RCTL, E1000E_RCTL_EN |
E1000E_RCTL_UPE |
E1000E_RCTL_MPE);
/* Enable all interrupts */
e1000e_macreg_write(&d->e1000e, E1000E_IMS, 0xFFFFFFFF);
}
static void *e1000e_pci_get_driver(void *obj, const char *interface)
{
QE1000E_PCI *epci = obj;
if (!g_strcmp0(interface, "e1000e-if")) {
return &epci->e1000e;
}
/* implicit contains */
if (!g_strcmp0(interface, "pci-device")) {
return &epci->pci_dev;
}
fprintf(stderr, "%s not present in e1000e\n", interface);
g_assert_not_reached();
}
static void *e1000e_pci_create(void *pci_bus, QGuestAllocator *alloc,
void *addr)
{
QE1000E_PCI *d = g_new0(QE1000E_PCI, 1);
QPCIBus *bus = pci_bus;
QPCIAddress *address = addr;
qpci_device_foreach(bus, address->vendor_id, address->device_id,
e1000e_foreach_callback, &d->pci_dev);
/* Map BAR0 (mac registers) */
d->mac_regs = qpci_iomap(&d->pci_dev, 0, NULL);
/* Allocate and setup TX ring */
d->e1000e.tx_ring = guest_alloc(alloc, E1000E_RING_LEN);
g_assert(d->e1000e.tx_ring != 0);
/* Allocate and setup RX ring */
d->e1000e.rx_ring = guest_alloc(alloc, E1000E_RING_LEN);
g_assert(d->e1000e.rx_ring != 0);
d->obj.get_driver = e1000e_pci_get_driver;
d->obj.start_hw = e1000e_pci_start_hw;
d->obj.destructor = e1000e_pci_destructor;
return &d->obj;
}
static void e1000e_register_nodes(void)
{
QPCIAddress addr = {
.vendor_id = 0x8086,
.device_id = 0x10D3,
};
/* FIXME: every test using this node needs to setup a -netdev socket,id=hs0
* otherwise QEMU is not going to start */
QOSGraphEdgeOptions opts = {
.extra_device_opts = "netdev=hs0",
};
add_qpci_address(&opts, &addr);
qos_node_create_driver("e1000e", e1000e_pci_create);
qos_node_consumes("e1000e", "pci-bus", &opts);
}
libqos_init(e1000e_register_nodes);
Reference in New Issue View Git Blame Copy Permalink