2bea128c3d
The Aspeed SOCs have two SD/MMC controllers. Add a device that encapsulates both of these controllers and models the Aspeed-specific registers and behavior. Tested by reading from mmcblk0 in Linux: qemu-system-arm -machine romulus-bmc -nographic \ -drive file=flash-romulus,format=raw,if=mtd \ -device sd-card,drive=sd0 -drive file=_tmp/kernel,format=raw,if=sd,id=sd0 Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Cédric Le Goater <clg@kaod.org> Message-id: 20190925143248.10000-3-clg@kaod.org [clg: - changed the controller MMIO window size to 0x1000 - moved the MMIO mapping of the SDHCI slots at the SoC level - merged code to add SD drives on the SD buses at the machine level ] Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
478 lines
18 KiB
C
478 lines
18 KiB
C
/*
|
|
* OpenPOWER Palmetto BMC
|
|
*
|
|
* Andrew Jeffery <andrew@aj.id.au>
|
|
*
|
|
* Copyright 2016 IBM Corp.
|
|
*
|
|
* This code is licensed under the GPL version 2 or later. See
|
|
* the COPYING file in the top-level directory.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qapi/error.h"
|
|
#include "cpu.h"
|
|
#include "exec/address-spaces.h"
|
|
#include "hw/arm/boot.h"
|
|
#include "hw/arm/aspeed.h"
|
|
#include "hw/arm/aspeed_soc.h"
|
|
#include "hw/boards.h"
|
|
#include "hw/i2c/smbus_eeprom.h"
|
|
#include "hw/misc/pca9552.h"
|
|
#include "hw/misc/tmp105.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "qemu/log.h"
|
|
#include "sysemu/block-backend.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "hw/loader.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qemu/units.h"
|
|
|
|
static struct arm_boot_info aspeed_board_binfo = {
|
|
.board_id = -1, /* device-tree-only board */
|
|
};
|
|
|
|
struct AspeedBoardState {
|
|
AspeedSoCState soc;
|
|
MemoryRegion ram_container;
|
|
MemoryRegion ram;
|
|
MemoryRegion max_ram;
|
|
};
|
|
|
|
/* Palmetto hardware value: 0x120CE416 */
|
|
#define PALMETTO_BMC_HW_STRAP1 ( \
|
|
SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) | \
|
|
SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \
|
|
SCU_AST2400_HW_STRAP_ACPI_DIS | \
|
|
SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \
|
|
SCU_HW_STRAP_VGA_CLASS_CODE | \
|
|
SCU_HW_STRAP_LPC_RESET_PIN | \
|
|
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \
|
|
SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \
|
|
SCU_HW_STRAP_SPI_WIDTH | \
|
|
SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
|
|
SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))
|
|
|
|
/* AST2500 evb hardware value: 0xF100C2E6 */
|
|
#define AST2500_EVB_HW_STRAP1 (( \
|
|
AST2500_HW_STRAP1_DEFAULTS | \
|
|
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
|
|
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
|
|
SCU_AST2500_HW_STRAP_UART_DEBUG | \
|
|
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
|
|
SCU_HW_STRAP_MAC1_RGMII | \
|
|
SCU_HW_STRAP_MAC0_RGMII) & \
|
|
~SCU_HW_STRAP_2ND_BOOT_WDT)
|
|
|
|
/* Romulus hardware value: 0xF10AD206 */
|
|
#define ROMULUS_BMC_HW_STRAP1 ( \
|
|
AST2500_HW_STRAP1_DEFAULTS | \
|
|
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
|
|
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
|
|
SCU_AST2500_HW_STRAP_UART_DEBUG | \
|
|
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
|
|
SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
|
|
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
|
|
|
|
/* Swift hardware value: 0xF11AD206 */
|
|
#define SWIFT_BMC_HW_STRAP1 ( \
|
|
AST2500_HW_STRAP1_DEFAULTS | \
|
|
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
|
|
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
|
|
SCU_AST2500_HW_STRAP_UART_DEBUG | \
|
|
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
|
|
SCU_H_PLL_BYPASS_EN | \
|
|
SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
|
|
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
|
|
|
|
/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
|
|
#define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
|
|
|
|
/*
|
|
* The max ram region is for firmwares that scan the address space
|
|
* with load/store to guess how much RAM the SoC has.
|
|
*/
|
|
static uint64_t max_ram_read(void *opaque, hwaddr offset, unsigned size)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void max_ram_write(void *opaque, hwaddr offset, uint64_t value,
|
|
unsigned size)
|
|
{
|
|
/* Discard writes */
|
|
}
|
|
|
|
static const MemoryRegionOps max_ram_ops = {
|
|
.read = max_ram_read,
|
|
.write = max_ram_write,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
#define FIRMWARE_ADDR 0x0
|
|
|
|
static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
|
|
Error **errp)
|
|
{
|
|
BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
|
|
uint8_t *storage;
|
|
int64_t size;
|
|
|
|
/* The block backend size should have already been 'validated' by
|
|
* the creation of the m25p80 object.
|
|
*/
|
|
size = blk_getlength(blk);
|
|
if (size <= 0) {
|
|
error_setg(errp, "failed to get flash size");
|
|
return;
|
|
}
|
|
|
|
if (rom_size > size) {
|
|
rom_size = size;
|
|
}
|
|
|
|
storage = g_new0(uint8_t, rom_size);
|
|
if (blk_pread(blk, 0, storage, rom_size) < 0) {
|
|
error_setg(errp, "failed to read the initial flash content");
|
|
return;
|
|
}
|
|
|
|
rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr);
|
|
g_free(storage);
|
|
}
|
|
|
|
static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
|
|
Error **errp)
|
|
{
|
|
int i ;
|
|
|
|
for (i = 0; i < s->num_cs; ++i) {
|
|
AspeedSMCFlash *fl = &s->flashes[i];
|
|
DriveInfo *dinfo = drive_get_next(IF_MTD);
|
|
qemu_irq cs_line;
|
|
|
|
fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
|
|
if (dinfo) {
|
|
qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
|
|
errp);
|
|
}
|
|
qdev_init_nofail(fl->flash);
|
|
|
|
cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
|
|
}
|
|
}
|
|
|
|
static void aspeed_board_init(MachineState *machine,
|
|
const AspeedBoardConfig *cfg)
|
|
{
|
|
AspeedBoardState *bmc;
|
|
AspeedSoCClass *sc;
|
|
DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
|
|
ram_addr_t max_ram_size;
|
|
int i;
|
|
|
|
bmc = g_new0(AspeedBoardState, 1);
|
|
|
|
memory_region_init(&bmc->ram_container, NULL, "aspeed-ram-container",
|
|
UINT32_MAX);
|
|
|
|
object_initialize_child(OBJECT(machine), "soc", &bmc->soc,
|
|
(sizeof(bmc->soc)), cfg->soc_name, &error_abort,
|
|
NULL);
|
|
|
|
sc = ASPEED_SOC_GET_CLASS(&bmc->soc);
|
|
|
|
object_property_set_uint(OBJECT(&bmc->soc), ram_size, "ram-size",
|
|
&error_abort);
|
|
object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1",
|
|
&error_abort);
|
|
object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
|
|
&error_abort);
|
|
object_property_set_int(OBJECT(&bmc->soc), machine->smp.cpus, "num-cpus",
|
|
&error_abort);
|
|
object_property_set_link(OBJECT(&bmc->soc), OBJECT(&bmc->ram_container),
|
|
"dram", &error_abort);
|
|
if (machine->kernel_filename) {
|
|
/*
|
|
* When booting with a -kernel command line there is no u-boot
|
|
* that runs to unlock the SCU. In this case set the default to
|
|
* be unlocked as the kernel expects
|
|
*/
|
|
object_property_set_int(OBJECT(&bmc->soc), ASPEED_SCU_PROT_KEY,
|
|
"hw-prot-key", &error_abort);
|
|
}
|
|
object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
|
|
&error_abort);
|
|
|
|
/*
|
|
* Allocate RAM after the memory controller has checked the size
|
|
* was valid. If not, a default value is used.
|
|
*/
|
|
ram_size = object_property_get_uint(OBJECT(&bmc->soc), "ram-size",
|
|
&error_abort);
|
|
|
|
memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
|
|
memory_region_add_subregion(&bmc->ram_container, 0, &bmc->ram);
|
|
memory_region_add_subregion(get_system_memory(),
|
|
sc->info->memmap[ASPEED_SDRAM],
|
|
&bmc->ram_container);
|
|
|
|
max_ram_size = object_property_get_uint(OBJECT(&bmc->soc), "max-ram-size",
|
|
&error_abort);
|
|
memory_region_init_io(&bmc->max_ram, NULL, &max_ram_ops, NULL,
|
|
"max_ram", max_ram_size - ram_size);
|
|
memory_region_add_subregion(&bmc->ram_container, ram_size, &bmc->max_ram);
|
|
|
|
aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
|
|
aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort);
|
|
|
|
/* Install first FMC flash content as a boot rom. */
|
|
if (drive0) {
|
|
AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0];
|
|
MemoryRegion *boot_rom = g_new(MemoryRegion, 1);
|
|
|
|
/*
|
|
* create a ROM region using the default mapping window size of
|
|
* the flash module. The window size is 64MB for the AST2400
|
|
* SoC and 128MB for the AST2500 SoC, which is twice as big as
|
|
* needed by the flash modules of the Aspeed machines.
|
|
*/
|
|
memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
|
|
fl->size, &error_abort);
|
|
memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
|
|
boot_rom);
|
|
write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort);
|
|
}
|
|
|
|
aspeed_board_binfo.ram_size = ram_size;
|
|
aspeed_board_binfo.loader_start = sc->info->memmap[ASPEED_SDRAM];
|
|
aspeed_board_binfo.nb_cpus = bmc->soc.num_cpus;
|
|
|
|
if (cfg->i2c_init) {
|
|
cfg->i2c_init(bmc);
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(bmc->soc.sdhci.slots); i++) {
|
|
SDHCIState *sdhci = &bmc->soc.sdhci.slots[i];
|
|
DriveInfo *dinfo = drive_get_next(IF_SD);
|
|
BlockBackend *blk;
|
|
DeviceState *card;
|
|
|
|
blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
|
|
card = qdev_create(qdev_get_child_bus(DEVICE(sdhci), "sd-bus"),
|
|
TYPE_SD_CARD);
|
|
qdev_prop_set_drive(card, "drive", blk, &error_fatal);
|
|
object_property_set_bool(OBJECT(card), true, "realized", &error_fatal);
|
|
}
|
|
|
|
arm_load_kernel(ARM_CPU(first_cpu), machine, &aspeed_board_binfo);
|
|
}
|
|
|
|
static void palmetto_bmc_i2c_init(AspeedBoardState *bmc)
|
|
{
|
|
AspeedSoCState *soc = &bmc->soc;
|
|
DeviceState *dev;
|
|
uint8_t *eeprom_buf = g_malloc0(32 * 1024);
|
|
|
|
/* The palmetto platform expects a ds3231 RTC but a ds1338 is
|
|
* enough to provide basic RTC features. Alarms will be missing */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), "ds1338", 0x68);
|
|
|
|
smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 0), 0x50,
|
|
eeprom_buf);
|
|
|
|
/* add a TMP423 temperature sensor */
|
|
dev = i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 2),
|
|
"tmp423", 0x4c);
|
|
object_property_set_int(OBJECT(dev), 31000, "temperature0", &error_abort);
|
|
object_property_set_int(OBJECT(dev), 28000, "temperature1", &error_abort);
|
|
object_property_set_int(OBJECT(dev), 20000, "temperature2", &error_abort);
|
|
object_property_set_int(OBJECT(dev), 110000, "temperature3", &error_abort);
|
|
}
|
|
|
|
static void ast2500_evb_i2c_init(AspeedBoardState *bmc)
|
|
{
|
|
AspeedSoCState *soc = &bmc->soc;
|
|
uint8_t *eeprom_buf = g_malloc0(8 * 1024);
|
|
|
|
smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), 0x50,
|
|
eeprom_buf);
|
|
|
|
/* The AST2500 EVB expects a LM75 but a TMP105 is compatible */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7),
|
|
TYPE_TMP105, 0x4d);
|
|
|
|
/* The AST2500 EVB does not have an RTC. Let's pretend that one is
|
|
* plugged on the I2C bus header */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
|
|
}
|
|
|
|
static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
|
|
{
|
|
AspeedSoCState *soc = &bmc->soc;
|
|
|
|
/* The romulus board expects Epson RX8900 I2C RTC but a ds1338 is
|
|
* good enough */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
|
|
}
|
|
|
|
static void swift_bmc_i2c_init(AspeedBoardState *bmc)
|
|
{
|
|
AspeedSoCState *soc = &bmc->soc;
|
|
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
|
|
|
|
/* The swift board expects a TMP275 but a TMP105 is compatible */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
|
|
/* The swift board expects a pca9551 but a pca9552 is compatible */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
|
|
|
|
/* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
|
|
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
|
|
/* The swift board expects a pca9539 but a pca9552 is compatible */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
|
|
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
|
|
/* The swift board expects a pca9539 but a pca9552 is compatible */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
|
|
0x74);
|
|
|
|
/* The swift board expects a TMP275 but a TMP105 is compatible */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
|
|
}
|
|
|
|
static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
|
|
{
|
|
AspeedSoCState *soc = &bmc->soc;
|
|
uint8_t *eeprom_buf = g_malloc0(8 * 1024);
|
|
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), TYPE_PCA9552,
|
|
0x60);
|
|
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 4), "tmp423", 0x4c);
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 5), "tmp423", 0x4c);
|
|
|
|
/* The Witherspoon expects a TMP275 but a TMP105 is compatible */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), TYPE_TMP105,
|
|
0x4a);
|
|
|
|
/* The witherspoon board expects Epson RX8900 I2C RTC but a ds1338 is
|
|
* good enough */
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
|
|
|
|
smbus_eeprom_init_one(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), 0x51,
|
|
eeprom_buf);
|
|
i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), TYPE_PCA9552,
|
|
0x60);
|
|
}
|
|
|
|
static void aspeed_machine_init(MachineState *machine)
|
|
{
|
|
AspeedMachineClass *amc = ASPEED_MACHINE_GET_CLASS(machine);
|
|
|
|
aspeed_board_init(machine, amc->board);
|
|
}
|
|
|
|
static void aspeed_machine_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
|
|
const AspeedBoardConfig *board = data;
|
|
|
|
mc->desc = board->desc;
|
|
mc->init = aspeed_machine_init;
|
|
mc->max_cpus = ASPEED_CPUS_NUM;
|
|
mc->no_floppy = 1;
|
|
mc->no_cdrom = 1;
|
|
mc->no_parallel = 1;
|
|
if (board->ram) {
|
|
mc->default_ram_size = board->ram;
|
|
}
|
|
amc->board = board;
|
|
}
|
|
|
|
static const TypeInfo aspeed_machine_type = {
|
|
.name = TYPE_ASPEED_MACHINE,
|
|
.parent = TYPE_MACHINE,
|
|
.instance_size = sizeof(AspeedMachine),
|
|
.class_size = sizeof(AspeedMachineClass),
|
|
.abstract = true,
|
|
};
|
|
|
|
static const AspeedBoardConfig aspeed_boards[] = {
|
|
{
|
|
.name = MACHINE_TYPE_NAME("palmetto-bmc"),
|
|
.desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)",
|
|
.soc_name = "ast2400-a1",
|
|
.hw_strap1 = PALMETTO_BMC_HW_STRAP1,
|
|
.fmc_model = "n25q256a",
|
|
.spi_model = "mx25l25635e",
|
|
.num_cs = 1,
|
|
.i2c_init = palmetto_bmc_i2c_init,
|
|
.ram = 256 * MiB,
|
|
}, {
|
|
.name = MACHINE_TYPE_NAME("ast2500-evb"),
|
|
.desc = "Aspeed AST2500 EVB (ARM1176)",
|
|
.soc_name = "ast2500-a1",
|
|
.hw_strap1 = AST2500_EVB_HW_STRAP1,
|
|
.fmc_model = "w25q256",
|
|
.spi_model = "mx25l25635e",
|
|
.num_cs = 1,
|
|
.i2c_init = ast2500_evb_i2c_init,
|
|
.ram = 512 * MiB,
|
|
}, {
|
|
.name = MACHINE_TYPE_NAME("romulus-bmc"),
|
|
.desc = "OpenPOWER Romulus BMC (ARM1176)",
|
|
.soc_name = "ast2500-a1",
|
|
.hw_strap1 = ROMULUS_BMC_HW_STRAP1,
|
|
.fmc_model = "n25q256a",
|
|
.spi_model = "mx66l1g45g",
|
|
.num_cs = 2,
|
|
.i2c_init = romulus_bmc_i2c_init,
|
|
.ram = 512 * MiB,
|
|
}, {
|
|
.name = MACHINE_TYPE_NAME("swift-bmc"),
|
|
.desc = "OpenPOWER Swift BMC (ARM1176)",
|
|
.soc_name = "ast2500-a1",
|
|
.hw_strap1 = SWIFT_BMC_HW_STRAP1,
|
|
.fmc_model = "mx66l1g45g",
|
|
.spi_model = "mx66l1g45g",
|
|
.num_cs = 2,
|
|
.i2c_init = swift_bmc_i2c_init,
|
|
.ram = 512 * MiB,
|
|
}, {
|
|
.name = MACHINE_TYPE_NAME("witherspoon-bmc"),
|
|
.desc = "OpenPOWER Witherspoon BMC (ARM1176)",
|
|
.soc_name = "ast2500-a1",
|
|
.hw_strap1 = WITHERSPOON_BMC_HW_STRAP1,
|
|
.fmc_model = "mx25l25635e",
|
|
.spi_model = "mx66l1g45g",
|
|
.num_cs = 2,
|
|
.i2c_init = witherspoon_bmc_i2c_init,
|
|
.ram = 512 * MiB,
|
|
},
|
|
};
|
|
|
|
static void aspeed_machine_types(void)
|
|
{
|
|
int i;
|
|
|
|
type_register_static(&aspeed_machine_type);
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_boards); ++i) {
|
|
TypeInfo ti = {
|
|
.name = aspeed_boards[i].name,
|
|
.parent = TYPE_ASPEED_MACHINE,
|
|
.class_init = aspeed_machine_class_init,
|
|
.class_data = (void *)&aspeed_boards[i],
|
|
};
|
|
type_register(&ti);
|
|
}
|
|
}
|
|
|
|
type_init(aspeed_machine_types)
|