rust/doc/tutorial-macros.md

% Rust Macros Tutorial

# Introduction

Functions are the primary tool that programmers can use to build abstractions.
Sometimes, however, programmers want to perform abstractions over things that are not
runtime values. Macros provide a syntactic abstraction. For an example of how this
can be useful, consider the following two code fragments, which both pattern-match
on their input and return early in one case, and do nothing otherwise:

~~~~
# enum t { special_a(uint), special_b(uint) };
# fn f() -> uint {
# let input_1 = special_a(0), input_2 = special_a(0);
match input_1 {
    special_a(x) => { return x; }
    _ => {}
}
// ...
match input_2 {
    special_b(x) => { return x; }
    _ => {}
}
# return 0u;
# }
~~~~

This code could become tiresome if repeated many times. However, no function
can capture its functionality to make it possible to rewrite the repetition
away. Rust's macro system, however, can eliminate the repetition. Macros are
lightweight custom syntax extensions, themselves defined using the
`macro_rules!` syntax extension. The following `early_return` macro captures
the pattern in the above code:

~~~~
# enum t { special_a(uint), special_b(uint) };
# fn f() -> uint {
# let input_1 = special_a(0), input_2 = special_a(0);
macro_rules! early_return(
    ($inp:expr $sp:ident) => ( //invoke it like `(input_5 special_e)`
        match $inp {
            $sp(x) => { return x; }
            _ => {}
        }
    );
)
// ...
early_return!(input_1 special_a);
// ...
early_return!(input_2 special_b);
# return 0;
# }
~~~~

Macros are defined in pattern-matching style: in the above example, the text
`($inp:expr $sp:ident)` that appears on the left-hand side of the `=>` is the
*macro invocation syntax*, a pattern denoting how to write a call to the
macro. The text on the right-hand side of the `=>`, beginning with `match
$inp`, is the *macro transcription syntax*: what the macro expands to.

# Invocation syntax

The macro invocation syntax specifies the syntax for the arguments to the
macro. It appears on the left-hand side of the `=>` in a macro definition. It
conforms to the following rules:

1. It must be surrounded by parentheses.
2. `$` has special meaning (described below).
3. The `()`s, `[]`s, and `{}`s it contains must balance. For example, `([)` is
forbidden.

Otherwise, the invocation syntax is free-form.

To take as an argument a fragment of Rust code, write `$` followed by a name
 (for use on the right-hand side), followed by a `:`, followed by a *fragment
 specifier*. The fragment specifier denotes the sort of fragment to match. The
 most common fragment specifiers are:

* `ident` (an identifier, referring to a variable or item. Examples: `f`, `x`,
  `foo`.)
* `expr` (an expression. Examples: `2 + 2`; `if true then { 1 } else { 2 }`;
  `f(42)`.)
* `ty` (a type. Examples: `int`, `~[(char, ~str)]`, `&T`.)
* `pat` (a pattern, usually appearing in a `match` or on the left-hand side of
  a declaration. Examples: `Some(t)`; `(17, 'a')`; `_`.)
* `block` (a sequence of actions. Example: `{ log(error, "hi"); return 12; }`)

The parser interprets any token that's not preceded by a `$` literally. Rust's usual
rules of tokenization apply,

So `($x:ident -> (($e:expr)))`, though excessively fancy, would designate a macro
that could be invoked like: `my_macro!(i->(( 2+2 )))`.

## Invocation location

A macro invocation may take the place of (and therefore expand to) either an
expression, an item, or a statement. The Rust parser will parse the macro
invocation as a "placeholder" for whichever of those three nonterminals is
appropriate for the location.

At expansion time, the output of the macro will be parsed as whichever of the
three nonterminals it stands in for. This means that a single macro might,
for example, expand to an item or an expression, depending on its arguments
(and cause a syntax error if it is called with the wrong argument for its
location). Although this behavior sounds excessively dynamic, it is known to
be useful under some circumstances.


# Transcription syntax

The right-hand side of the `=>` follows the same rules as the left-hand side,
except that a `$` need only be followed by the name of the syntactic fragment
to transcribe into the macro expansion; its type need not be repeated.

The right-hand side must be enclosed by delimiters, which are ignored by the
transcriber (therefore `() => ((1,2,3))` is a macro that expands to a tuple
expression, `() => (let $x=$val)` is a macro that expands to a statement, and
`() => (1,2,3)` is a macro that expands to a syntax error).

Except for permissibility of `$name` (and `$(...)*`, discussed below), the
right-hand side of a macro definition is ordinary Rust syntax. In particular,
macro invocations (including invocations of the macro currently being defined)
are permitted in expression, statement, and item locations. However, nothing
else about the code is examined or executed by the macro system; execution
still has to wait until runtime.

## Interpolation location

The interpolation `$argument_name` may appear in any location consistent with
its fragment specifier (i.e., if it is specified as `ident`, it may be used
anywhere an identifier is permitted).

# Multiplicity

## Invocation

Going back to the motivating example, recall that `early_return` expanded into
a `match` that would `return` if the `match`'s scrutinee matched the
"special case" identifier provided as the second argument to `early_return`,
and do nothing otherwise. Now suppose that we wanted to write a
version of `early_return` that could handle a variable number of "special"
cases.

The syntax `$(...)*` on the left-hand side of the `=>` in a macro definition
accepts zero or more occurrences of its contents. It works much
like the `*` operator in regular expressions. It also supports a
separator token (a comma-separated list could be written `$(...),*`), and `+`
instead of `*` to mean "at least one".

~~~~
# enum t { special_a(uint),special_b(uint),special_c(uint),special_d(uint)};
# fn f() -> uint {
# let input_1 = special_a(0), input_2 = special_a(0);
macro_rules! early_return(
    ($inp:expr, [ $($sp:ident)|+ ]) => (
        match $inp {
            $(
                $sp(x) => { return x; }
            )+
            _ => {}
        }
    );
)
// ...
early_return!(input_1, [special_a|special_c|special_d]);
// ...
early_return!(input_2, [special_b]);
# return 0;
# }
~~~~

### Transcription

As the above example demonstrates, `$(...)*` is also valid on the right-hand
side of a macro definition. The behavior of `*` in transcription,
especially in cases where multiple `*`s are nested, and multiple different
names are involved, can seem somewhat magical and intuitive at first. The
system that interprets them is called "Macro By Example". The two rules to
keep in mind are (1) the behavior of `$(...)*` is to walk through one "layer"
of repetitions for all of the `$name`s it contains in lockstep, and (2) each
`$name` must be under at least as many `$(...)*`s as it was matched against.
If it is under more, it'll be repeated, as appropriate.

## Parsing limitations


For technical reasons, there are two limitations to the treatment of syntax
fragments by the macro parser:

1. The parser will always parse as much as possible of a Rust syntactic
fragment. For example, if the comma were omitted from the syntax of
`early_return!` above, `input_1 [` would've been interpreted as the beginning
of an array index. In fact, invoking the macro would have been impossible.
2. The parser must have eliminated all ambiguity by the time it reaches a
`$name:fragment_specifier` declaration. This limitation can result in parse
errors when declarations occur at the beginning of, or immediately after,
a `$(...)*`. For example, the grammar `$($t:ty)* $e:expr` will always fail to
parse because the parser would be forced to choose between parsing `t` and
parsing `e`. Changing the invocation syntax to require a distinctive token in
front can solve the problem. In the above example, `$(T $t:ty)* E $e:exp`
solves the problem.

# Macro argument pattern matching

Now consider code like the following:

## Motivation

~~~~
# enum t1 { good_1(t2, uint), bad_1 };
# pub struct t2 { body: t3 }
# enum t3 { good_2(uint), bad_2};
# fn f(x: t1) -> uint {
match x {
    good_1(g1, val) => {
        match g1.body {
            good_2(result) => {
                // complicated stuff goes here
                return result + val;
            },
            _ => die!(~"Didn't get good_2")
        }
    }
    _ => return 0 // default value
}
# }
~~~~

All the complicated stuff is deeply indented, and the error-handling code is
separated from matches that fail. We'd like to write a macro that performs
a match, but with a syntax that suits the problem better. The following macro
can solve the problem:

~~~~
macro_rules! biased_match (
    // special case: `let (x) = ...` is illegal, so use `let x = ...` instead
    ( ($e:expr) ~ ($p:pat) else $err:stmt ;
      binds $bind_res:ident
    ) => (
        let $bind_res = match $e {
            $p => ( $bind_res ),
            _ => { $err }
        };
    );
    // more than one name; use a tuple
    ( ($e:expr) ~ ($p:pat) else $err:stmt ;
      binds $( $bind_res:ident ),*
    ) => (
        let ( $( $bind_res ),* ) = match $e {
            $p => ( $( $bind_res ),* ),
            _ => { $err }
        };
    )
)

# enum t1 { good_1(t2, uint), bad_1 };
# pub struct t2 { body: t3 }
# enum t3 { good_2(uint), bad_2};
# fn f(x: t1) -> uint {
biased_match!((x)       ~ (good_1(g1, val)) else { return 0 };
              binds g1, val )
biased_match!((g1.body) ~ (good_2(result) )
                  else { die!(~"Didn't get good_2") };
              binds result )
// complicated stuff goes here
return result + val;
# }
~~~~

This solves the indentation problem. But if we have a lot of chained matches
like this, we might prefer to write a single macro invocation. The input
pattern we want is clear:
~~~~
# macro_rules! b(
    ( $( ($e:expr) ~ ($p:pat) else $err:stmt ; )*
      binds $( $bind_res:ident ),*
    )
# => (0))
~~~~

However, it's not possible to directly expand to nested match statements. But
there is a solution.

## The recusive approach to macro writing

A macro may accept multiple different input grammars. The first one to
successfully match the actual argument to a macro invocation is the one that
"wins".


In the case of the example above, we want to write a recursive macro to
process the semicolon-terminated lines, one-by-one. So, we want the following
input patterns:

~~~~
# macro_rules! b(
    ( binds $( $bind_res:ident ),* )
# => (0))
~~~~
...and:

~~~~
# macro_rules! b(
    (    ($e     :expr) ~ ($p     :pat) else $err     :stmt ;
      $( ($e_rest:expr) ~ ($p_rest:pat) else $err_rest:stmt ; )*
      binds  $( $bind_res:ident ),*
    )
# => (0))
~~~~

The resulting macro looks like this. Note that the separation into
`biased_match!` and `biased_match_rec!` occurs only because we have an outer
piece of syntax (the `let`) which we only want to transcribe once.

~~~~

macro_rules! biased_match_rec (
    // Handle the first layer
    (   ($e     :expr) ~ ($p     :pat) else $err     :stmt ;
     $( ($e_rest:expr) ~ ($p_rest:pat) else $err_rest:stmt ; )*
     binds $( $bind_res:ident ),*
    ) => (
        match $e {
            $p => {
                // Recursively handle the next layer
                biased_match_rec!($( ($e_rest) ~ ($p_rest) else $err_rest ; )*
                                  binds $( $bind_res ),*
                )
            }
            _ => { $err }
        }
    );
    ( binds $( $bind_res:ident ),* ) => ( ($( $bind_res ),*) )
)

// Wrap the whole thing in a `let`.
macro_rules! biased_match (
    // special case: `let (x) = ...` is illegal, so use `let x = ...` instead
    ( $( ($e:expr) ~ ($p:pat) else $err:stmt ; )*
      binds $bind_res:ident
    ) => (
        let ( $( $bind_res ),* ) = biased_match_rec!(
            $( ($e) ~ ($p) else $err ; )*
            binds $bind_res
        );
    );
    // more than one name: use a tuple
    ( $( ($e:expr) ~ ($p:pat) else $err:stmt ; )*
      binds  $( $bind_res:ident ),*
    ) => (
        let ( $( $bind_res ),* ) = biased_match_rec!(
            $( ($e) ~ ($p) else $err ; )*
            binds $( $bind_res ),*
        );
    )
)


# enum t1 { good_1(t2, uint), bad_1 };
# pub struct t2 { body: t3 }
# enum t3 { good_2(uint), bad_2};
# fn f(x: t1) -> uint {
biased_match!(
    (x)       ~ (good_1(g1, val)) else { return 0 };
    (g1.body) ~ (good_2(result) ) else { die!(~"Didn't get good_2") };
    binds val, result )
// complicated stuff goes here
return result + val;
# }
~~~~

This technique is applicable in many cases where transcribing a result "all
at once" is not possible. It resembles ordinary functional programming in some
respects, but it is important to recognize the differences.

The first difference is important, but also easy to forget: the transcription
(right-hand) side of a `macro_rules!` rule is literal syntax, which can only
be executed at run-time. If a piece of transcription syntax does not itself
appear inside another macro invocation, it will become part of the final
program. If it is inside a macro invocation (for example, the recursive
invocation of `biased_match_rec!`), it does have the opprotunity to affect
transcription, but only through the process of attempted pattern matching.

The second difference is related: the evaluation order of macros feels
"backwards" compared to ordinary programming. Given an invocation
`m1!(m2!())`, the expander first expands `m1!`, giving it as input the literal
syntax `m2!()`. If it transcribes its argument unchanged into an appropriate
position (in particular, not as an argument to yet another macro invocation),
the expander will then proceed to evaluate `m2!()` (along with any other macro
invocations `m1!(m2!())` produced).

# A final note

Macros, as currently implemented, are not for the faint of heart. Even
ordinary syntax errors can be more difficult to debug when they occur inside a
macro, and errors caused by parse problems in generated code can be very
tricky. Invoking the `log_syntax!` macro can help elucidate intermediate
states, invoking `trace_macros!(true)` will automatically print those
intermediate states out, and passing the flag `--pretty expanded` as a
command-line argument to the compiler will show the result of expansion.