Auto merge of #64583 - tmandry:rollup-b793x81, r=tmandry

Rollup of 5 pull requests

Successful merges:

 - #64207 (Make rustc_mir::dataflow module pub (for clippy))
 - #64348 (PR: documentation spin loop hint)
 - #64532 (Replace `state_for_location` with `DataflowResultsCursor`)
 - #64578 (Fix issue22656 with LLDB 8)
 - #64580 (Update books)

Failed merges:

r? @ghost

src/doc/book

@@ -1 +1 @@
-Subproject commit 7ddc46460f09a5cd9bd2a620565bdc20b3315ea9
+Subproject commit 871416b85c1a73717d65d6f4a9ea29e5aef3db0e

src/doc/rust-by-example

@@ -1 +1 @@
-Subproject commit e76be6b2dc84c6a992e186157efe29d625e29b94
+Subproject commit 67cfbf31df880728dcf7cb35b15b028ec92caf31

src/libcore/hint.rs

@@ -49,28 +49,16 @@ pub unsafe fn unreachable_unchecked() -> ! {
     intrinsics::unreachable()
 }
 
-/// Signals the processor that it is entering a busy-wait spin-loop.
+/// Emits a machine instruction hinting to the processor that it is running in busy-wait
+/// spin-loop ("spin lock").
 ///
-/// Upon receiving spin-loop signal the processor can optimize its behavior by, for example, saving
+/// For a discussion of different locking strategies and their trade-offs, see
-/// power or switching hyper-threads.
+/// [`core::sync::atomic::spin_loop_hint`].
-///
-/// This function is different than [`std::thread::yield_now`] which directly yields to the
-/// system's scheduler, whereas `spin_loop` only signals the processor that it is entering a
-/// busy-wait spin-loop without yielding control to the system's scheduler.
-///
-/// Using a busy-wait spin-loop with `spin_loop` is ideally used in situations where a
-/// contended lock is held by another thread executed on a different CPU and where the waiting
-/// times are relatively small. Because entering busy-wait spin-loop does not trigger the system's
-/// scheduler, no overhead for switching threads occurs. However, if the thread holding the
-/// contended lock is running on the same CPU, the spin-loop is likely to occupy an entire CPU slice
-/// before switching to the thread that holds the lock. If the contending lock is held by a thread
-/// on the same CPU or if the waiting times for acquiring the lock are longer, it is often better to
-/// use [`std::thread::yield_now`].
 ///
 /// **Note**: On platforms that do not support receiving spin-loop hints this function does not
 /// do anything at all.
 ///
-/// [`std::thread::yield_now`]: ../../std/thread/fn.yield_now.html
+/// [`core::sync::atomic::spin_loop_hint`]: ../sync/atomic/fn.spin_loop_hint.html
 #[inline]
 #[unstable(feature = "renamed_spin_loop", issue = "55002")]
 pub fn spin_loop() {

src/libcore/sync/atomic.rs

@@ -124,28 +124,31 @@ use crate::fmt;
 
 use crate::hint::spin_loop;
 
-/// Signals the processor that it is entering a busy-wait spin-loop.
+/// Signals the processor that it is inside a busy-wait spin-loop ("spin lock").
 ///
 /// Upon receiving spin-loop signal the processor can optimize its behavior by, for example, saving
 /// power or switching hyper-threads.
 ///
-/// This function is different than [`std::thread::yield_now`] which directly yields to the
+/// This function is different from [`std::thread::yield_now`] which directly yields to the
-/// system's scheduler, whereas `spin_loop_hint` only signals the processor that it is entering a
+/// system's scheduler, whereas `spin_loop_hint` does not interact with the operating system.
-/// busy-wait spin-loop without yielding control to the system's scheduler.
 ///
-/// Using a busy-wait spin-loop with `spin_loop_hint` is ideally used in situations where a
+/// Spin locks can be very efficient for short lock durations because they do not involve context
-/// contended lock is held by another thread executed on a different CPU and where the waiting
+/// switches or interaction with the operating system. For long lock durations they become wasteful
-/// times are relatively small. Because entering busy-wait spin-loop does not trigger the system's
+/// however because they use CPU cycles for the entire lock duration, and using a
-/// scheduler, no overhead for switching threads occurs. However, if the thread holding the
+/// [`std::sync::Mutex`] is likely the better approach. If actively spinning for a long time is
-/// contended lock is running on the same CPU, the spin-loop is likely to occupy an entire CPU slice
+/// required, e.g. because code polls a non-blocking API, calling [`std::thread::yield_now`]
-/// before switching to the thread that holds the lock. If the contending lock is held by a thread
+/// or [`std::thread::sleep`] may be the best option.
-/// on the same CPU or if the waiting times for acquiring the lock are longer, it is often better to
+///
-/// use [`std::thread::yield_now`].
+/// **Note**: Spin locks are based on the underlying assumption that another thread will release
+/// the lock 'soon'. In order for this to work, that other thread must run on a different CPU or
+/// core (at least potentially). Spin locks do not work efficiently on single CPU / core platforms.
 ///
 /// **Note**: On platforms that do not support receiving spin-loop hints this function does not
 /// do anything at all.
 ///
 /// [`std::thread::yield_now`]: ../../../std/thread/fn.yield_now.html
+/// [`std::thread::sleep`]: ../../../std/thread/fn.sleep.html
+/// [`std::sync::Mutex`]: ../../../std/sync/struct.Mutex.html
 #[inline]
 #[stable(feature = "spin_loop_hint", since = "1.24.0")]
 pub fn spin_loop_hint() {

src/librustc_mir/dataflow/mod.rs

@@ -56,7 +56,7 @@ where
 /// string (as well as that of rendering up-front); in exchange, you
 /// don't have to hand over ownership of your value or deal with
 /// borrowing it.
-pub(crate) struct DebugFormatted(String);
+pub struct DebugFormatted(String);
 
 impl DebugFormatted {
     pub fn new(input: &dyn fmt::Debug) -> DebugFormatted {
@@ -70,7 +70,7 @@ impl fmt::Debug for DebugFormatted {
     }
 }
 
-pub(crate) trait Dataflow<'tcx, BD: BitDenotation<'tcx>> {
+pub trait Dataflow<'tcx, BD: BitDenotation<'tcx>> {
     /// Sets up and runs the dataflow problem, using `p` to render results if
     /// implementation so chooses.
     fn dataflow<P>(&mut self, p: P) where P: Fn(&BD, BD::Idx) -> DebugFormatted {
@@ -121,7 +121,7 @@ pub struct MoveDataParamEnv<'tcx> {
     pub(crate) param_env: ty::ParamEnv<'tcx>,
 }
 
-pub(crate) fn do_dataflow<'a, 'tcx, BD, P>(
+pub fn do_dataflow<'a, 'tcx, BD, P>(
     tcx: TyCtxt<'tcx>,
     body: &'a Body<'tcx>,
     def_id: DefId,
@@ -453,34 +453,10 @@ where
     {
         self.flow_state.each_gen_bit(f)
     }
-}
 
-pub fn state_for_location<'tcx, T: BitDenotation<'tcx>>(loc: Location,
+    pub fn get(&self) -> &BitSet<BD::Idx> {
-                                                        analysis: &T,
+        self.flow_state.as_dense()
-                                                        result: &DataflowResults<'tcx, T>,
-                                                        body: &Body<'tcx>)
-    -> BitSet<T::Idx> {
-    let mut trans = GenKill::from_elem(HybridBitSet::new_empty(analysis.bits_per_block()));
-
-    for stmt in 0..loc.statement_index {
-        let mut stmt_loc = loc;
-        stmt_loc.statement_index = stmt;
-        analysis.before_statement_effect(&mut trans, stmt_loc);
-        analysis.statement_effect(&mut trans, stmt_loc);
     }
-
-    // Apply the pre-statement effect of the statement we're evaluating.
-    if loc.statement_index == body[loc.block].statements.len() {
-        analysis.before_terminator_effect(&mut trans, loc);
-    } else {
-        analysis.before_statement_effect(&mut trans, loc);
-    }
-
-    // Apply the transfer function for all preceding statements to the fixpoint
-    // at the start of the block.
-    let mut state = result.sets().entry_set_for(loc.block.index()).to_owned();
-    trans.apply(&mut state);
-    state
 }
 
 pub struct DataflowAnalysis<'a, 'tcx, O>
@@ -565,7 +541,7 @@ pub struct GenKill<T> {
     pub(crate) kill_set: T,
 }
 
-type GenKillSet<T> = GenKill<HybridBitSet<T>>;
+pub type GenKillSet<T> = GenKill<HybridBitSet<T>>;
 
 impl<T> GenKill<T> {
     /// Creates a new tuple where `gen_set == kill_set == elem`.
@@ -580,28 +556,28 @@ impl<T> GenKill<T> {
 }
 
 impl<E:Idx> GenKillSet<E> {
-    pub(crate) fn clear(&mut self) {
+    pub fn clear(&mut self) {
         self.gen_set.clear();
         self.kill_set.clear();
     }
 
-    fn gen(&mut self, e: E) {
+    pub fn gen(&mut self, e: E) {
         self.gen_set.insert(e);
         self.kill_set.remove(e);
     }
 
-    fn gen_all(&mut self, i: impl IntoIterator<Item: Borrow<E>>) {
+    pub fn gen_all(&mut self, i: impl IntoIterator<Item: Borrow<E>>) {
         for j in i {
             self.gen(*j.borrow());
         }
     }
 
-    fn kill(&mut self, e: E) {
+    pub fn kill(&mut self, e: E) {
         self.gen_set.remove(e);
         self.kill_set.insert(e);
     }
 
-    fn kill_all(&mut self, i: impl IntoIterator<Item: Borrow<E>>) {
+    pub fn kill_all(&mut self, i: impl IntoIterator<Item: Borrow<E>>) {
         for j in i {
             self.kill(*j.borrow());
         }

src/librustc_mir/lib.rs

@@ -35,7 +35,7 @@ pub mod error_codes;
 
 mod borrow_check;
 mod build;
-mod dataflow;
+pub mod dataflow;
 mod hair;
 mod lints;
 mod shim;

src/librustc_mir/transform/generator.rs

@@ -67,7 +67,7 @@ use crate::transform::{MirPass, MirSource};
 use crate::transform::simplify;
 use crate::transform::no_landing_pads::no_landing_pads;
 use crate::dataflow::{DataflowResults, DataflowResultsConsumer, FlowAtLocation};
-use crate::dataflow::{do_dataflow, DebugFormatted, state_for_location};
+use crate::dataflow::{do_dataflow, DebugFormatted, DataflowResultsCursor};
 use crate::dataflow::{MaybeStorageLive, HaveBeenBorrowedLocals, RequiresStorage};
 use crate::util::dump_mir;
 use crate::util::liveness;
@@ -436,9 +436,10 @@ fn locals_live_across_suspend_points(
     // Calculate when MIR locals have live storage. This gives us an upper bound of their
     // lifetimes.
     let storage_live_analysis = MaybeStorageLive::new(body);
-    let storage_live =
+    let storage_live_results =
         do_dataflow(tcx, body, def_id, &[], &dead_unwinds, storage_live_analysis,
                     |bd, p| DebugFormatted::new(&bd.body().local_decls[p]));
+    let mut storage_live_cursor = DataflowResultsCursor::new(&storage_live_results, body);
 
     // Find the MIR locals which do not use StorageLive/StorageDead statements.
     // The storage of these locals are always live.
@@ -448,17 +449,18 @@ fn locals_live_across_suspend_points(
     // Calculate the MIR locals which have been previously
     // borrowed (even if they are still active).
     let borrowed_locals_analysis = HaveBeenBorrowedLocals::new(body);
-    let borrowed_locals_result =
+    let borrowed_locals_results =
         do_dataflow(tcx, body, def_id, &[], &dead_unwinds, borrowed_locals_analysis,
                     |bd, p| DebugFormatted::new(&bd.body().local_decls[p]));
+    let mut borrowed_locals_cursor = DataflowResultsCursor::new(&borrowed_locals_results, body);
 
     // Calculate the MIR locals that we actually need to keep storage around
     // for.
-    let requires_storage_analysis = RequiresStorage::new(body, &borrowed_locals_result);
+    let requires_storage_analysis = RequiresStorage::new(body, &borrowed_locals_results);
-    let requires_storage =
+    let requires_storage_results =
         do_dataflow(tcx, body, def_id, &[], &dead_unwinds, requires_storage_analysis,
                     |bd, p| DebugFormatted::new(&bd.body().local_decls[p]));
-    let requires_storage_analysis = RequiresStorage::new(body, &borrowed_locals_result);
+    let mut requires_storage_cursor = DataflowResultsCursor::new(&requires_storage_results, body);
 
     // Calculate the liveness of MIR locals ignoring borrows.
     let mut live_locals = liveness::LiveVarSet::new_empty(body.local_decls.len());
@@ -484,10 +486,6 @@ fn locals_live_across_suspend_points(
             };
 
             if !movable {
-                let borrowed_locals = state_for_location(loc,
-                                                         &borrowed_locals_analysis,
-                                                         &borrowed_locals_result,
-                                                         body);
                 // The `liveness` variable contains the liveness of MIR locals ignoring borrows.
                 // This is correct for movable generators since borrows cannot live across
                 // suspension points. However for immovable generators we need to account for
@@ -498,22 +496,19 @@ fn locals_live_across_suspend_points(
                 // If a borrow is converted to a raw reference, we must also assume that it lives
                 // forever. Note that the final liveness is still bounded by the storage liveness
                 // of the local, which happens using the `intersect` operation below.
-                liveness.outs[block].union(&borrowed_locals);
+                borrowed_locals_cursor.seek(loc);
+                liveness.outs[block].union(borrowed_locals_cursor.get());
             }
 
-            let storage_liveness = state_for_location(loc,
+            storage_live_cursor.seek(loc);
-                                                      &storage_live_analysis,
+            let storage_liveness = storage_live_cursor.get();
-                                                      &storage_live,
-                                                      body);
 
             // Store the storage liveness for later use so we can restore the state
             // after a suspension point
             storage_liveness_map.insert(block, storage_liveness.clone());
 
-            let mut storage_required = state_for_location(loc,
+            requires_storage_cursor.seek(loc);
-                                                          &requires_storage_analysis,
+            let mut storage_required = requires_storage_cursor.get().clone();
-                                                          &requires_storage,
-                                                          body);
 
             // Mark locals without storage statements as always requiring storage
             storage_required.union(&ignored.0);
@@ -549,8 +544,7 @@ fn locals_live_across_suspend_points(
         body,
         &live_locals,
         &ignored,
-        requires_storage,
+        requires_storage_results);
-        requires_storage_analysis);
 
     LivenessInfo {
         live_locals,
@@ -588,7 +582,6 @@ fn compute_storage_conflicts(
     stored_locals: &liveness::LiveVarSet,
     ignored: &StorageIgnored,
     requires_storage: DataflowResults<'tcx, RequiresStorage<'mir, 'tcx>>,
-    _requires_storage_analysis: RequiresStorage<'mir, 'tcx>,
 ) -> BitMatrix<GeneratorSavedLocal, GeneratorSavedLocal> {
     assert_eq!(body.local_decls.len(), ignored.0.domain_size());
     assert_eq!(body.local_decls.len(), stored_locals.domain_size());

src/test/debuginfo/issue-22656.rs

@@ -15,7 +15,7 @@
 // lldbg-check:[...]$0 = vec![1, 2, 3]
 // lldbr-check:(alloc::vec::Vec<i32>) v = vec![1, 2, 3]
 // lldb-command:print zs
-// lldbg-check:[...]$1 = StructWithZeroSizedField { x: ZeroSizedStruct, y: 123, z: ZeroSizedStruct, w: 456 }
+// lldbg-check:[...]$1 = StructWithZeroSizedField { x: ZeroSizedStruct[...], y: 123, z: ZeroSizedStruct[...], w: 456 }
 // lldbr-check:(issue_22656::StructWithZeroSizedField) zs = StructWithZeroSizedField { x: ZeroSizedStruct { }, y: 123, z: ZeroSizedStruct { }, w: 456 }
 // lldbr-command:continue