Auto merge of #39042 - alexcrichton:upload-more, r=brson

travis: Expand dist builder coverage

This commit adds six new travis matrix entires for doing cross-compiled
distribution builds of the compiler. The support added in #38731 allows us to
quickly compile a complete suite of distribution artifacts for cross-compiled
platforms, and currently each matrix entry (when fully cached) clocks in around
an hour to finish. Note that a full test run typically takes about two hours
right now.

With further optimizations coming down the pike in #39026 this commit also
starts doubling up cross-compiled distribution builders on each matrix entry. We
initially planned to do one build per entry, but it's looking like we may be
able to get by with more than one in each entry. Depending on how long these
builds take we may even be able to up it to three, but we'll start with two
first.

This commit then completes the suite of cross-compiled compilers that we're
going to compile, adding it for a whole litany of platforms detailed in the
changes to the docker files here. The existing `cross` image is also trimmed
down quite a bit to avoid duplicate work, and we'll eventually provision it for
far more cross compilation as well.

Note that the gcc toolchains installed to compile most of these compilers are
inappropriate for actualy distribution. The glibc they pull in is much newer
than we'd like, so before we turn nightlies off we'll need to tweak these docker
files to custom build toolchains like the current `linux-cross` docker image
does.
This commit is contained in:
bors 2017-01-15 23:49:24 +00:00
commit ff591b6dc0
14 changed files with 394 additions and 55 deletions

View File

@ -15,8 +15,14 @@ matrix:
# Linux builders, all docker images
- env: IMAGE=arm-android DEPLOY=1
- env: IMAGE=cross DEPLOY=1
- env: IMAGE=dist-arm-unknown-linux-gnueabi DEPLOY=1
- env: IMAGE=dist-x86_64-unknown-freebsd DEPLOY=1
- env: IMAGE=dist-arm-linux DEPLOY=1
- env: IMAGE=dist-armv7-aarch64-linux DEPLOY=1
- env: IMAGE=dist-freebsd DEPLOY=1
- env: IMAGE=dist-mips-linux DEPLOY=1
- env: IMAGE=dist-mips64-linux DEPLOY=1
- env: IMAGE=dist-powerpc-linux DEPLOY=1
- env: IMAGE=dist-powerpc64-linux DEPLOY=1
- env: IMAGE=dist-s390x-linux-netbsd DEPLOY=1
- env: IMAGE=i686-gnu DEPLOY=1
- env: IMAGE=i686-gnu-nopt
- env: IMAGE=x86_64-gnu DEPLOY=1

View File

@ -53,4 +53,8 @@ ENV RUST_CONFIGURE_ARGS \
# to all the targets above eventually.
ENV SCRIPT \
python2.7 ../x.py test --target arm-linux-androideabi && \
python2.7 ../x.py dist --target arm-linux-androideabi
python2.7 ../x.py dist \
--target arm-linux-androideabi \
--target armv7-linux-androideabi \
--target i686-linux-android \
--target aarch64-linux-android

View File

@ -10,17 +10,6 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
git \
cmake \
sudo \
gcc-aarch64-linux-gnu libc6-dev-arm64-cross \
gcc-arm-linux-gnueabi libc6-dev-armel-cross \
gcc-arm-linux-gnueabihf libc6-dev-armhf-cross \
gcc-mips-linux-gnu libc6-dev-mips-cross \
gcc-mipsel-linux-gnu libc6-dev-mipsel-cross \
gcc-mips64-linux-gnuabi64 libc6-dev-mips64-cross \
gcc-mips64el-linux-gnuabi64 libc6-dev-mips64el-cross \
gcc-powerpc-linux-gnu libc6-dev-powerpc-cross \
gcc-powerpc64-linux-gnu libc6-dev-ppc64-cross \
gcc-powerpc64le-linux-gnu libc6-dev-ppc64el-cross \
gcc-s390x-linux-gnu libc6-dev-s390x-cross \
xz-utils
ENV SCCACHE_DIGEST=7237e38e029342fa27b7ac25412cb9d52554008b12389727320bd533fd7f05b6a96d55485f305caf95e5c8f5f97c3313e10012ccad3e752aba2518f3522ba783
@ -32,19 +21,7 @@ RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-ini
rm dumb-init_*.deb
ENTRYPOINT ["/usr/bin/dumb-init", "--"]
ENV TARGETS=aarch64-unknown-linux-gnu
ENV TARGETS=$TARGETS,arm-unknown-linux-gnueabi
ENV TARGETS=$TARGETS,arm-unknown-linux-gnueabihf
ENV TARGETS=$TARGETS,armv7-unknown-linux-gnueabihf
ENV TARGETS=$TARGETS,asmjs-unknown-emscripten
ENV TARGETS=$TARGETS,mips-unknown-linux-gnu
ENV TARGETS=$TARGETS,mips64-unknown-linux-gnuabi64
ENV TARGETS=$TARGETS,mips64el-unknown-linux-gnuabi64
ENV TARGETS=$TARGETS,mipsel-unknown-linux-gnu
ENV TARGETS=$TARGETS,powerpc-unknown-linux-gnu
ENV TARGETS=$TARGETS,powerpc64-unknown-linux-gnu
ENV TARGETS=$TARGETS,powerpc64le-unknown-linux-gnu
ENV TARGETS=$TARGETS,s390x-unknown-linux-gnu
ENV TARGETS=asmjs-unknown-emscripten
ENV TARGETS=$TARGETS,wasm32-unknown-emscripten
#ENV TARGETS=$TARGETS,mips-unknown-linux-musl
@ -62,15 +39,3 @@ ENV RUST_CONFIGURE_ARGS \
ENV SCRIPT \
python2.7 ../x.py build && \
python2.7 ../x.py dist --target wasm32-unknown-emscripten
ENV AR_s390x_unknown_linux_gnu=s390x-linux-gnu-ar \
CC_s390x_unknown_linux_gnu=s390x-linux-gnu-gcc \
AR_mips64_unknown_linux_gnuabi64=mips64-linux-gnuabi64-ar \
CC_mips64_unknown_linux_gnuabi64=mips64-linux-gnuabi64-gcc \
AR_mips64el_unknown_linux_gnuabi64=mips64el-linux-gnuabi64-ar \
CC_mips64el_unknown_linux_gnuabi64=mips64el-linux-gnuabi64-gcc \
AR_powerpc64_unknown_linux_gnu=powerpc64-linux-gnu-ar \
CC_powerpc64_unknown_linux_gnu=powerpc64-linux-gnu-gcc
# FIXME(rust-lang/rust#36150): powerpc unfortunately aborts right now
ENV NO_LLVM_ASSERTIONS=1

View File

@ -12,7 +12,8 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
sudo \
gdb \
xz-utils \
g++-arm-linux-gnueabi
g++-arm-linux-gnueabi \
g++-arm-linux-gnueabihf
ENV SCCACHE_DIGEST=7237e38e029342fa27b7ac25412cb9d52554008b12389727320bd533fd7f05b6a96d55485f305caf95e5c8f5f97c3313e10012ccad3e752aba2518f3522ba783
RUN curl -L https://api.pub.build.mozilla.org/tooltool/sha512/$SCCACHE_DIGEST | \
@ -23,8 +24,11 @@ RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-ini
rm dumb-init_*.deb
ENTRYPOINT ["/usr/bin/dumb-init", "--"]
ENV RUST_CONFIGURE_ARGS --host=arm-unknown-linux-gnueabi
ENV RUST_CONFIGURE_ARGS \
--host=arm-unknown-linux-gnueabi,arm-unknown-linux-gnueabihf
ENV SCRIPT \
python2.7 ../x.py dist \
--host arm-unknown-linux-gnueabi \
--target arm-unknown-linux-gnueabi
--target arm-unknown-linux-gnueabi \
--host arm-unknown-linux-gnueabihf \
--target arm-unknown-linux-gnueabihf

View File

@ -0,0 +1,34 @@
FROM ubuntu:16.04
RUN apt-get update && apt-get install -y --no-install-recommends \
g++ \
make \
file \
curl \
ca-certificates \
python2.7 \
git \
cmake \
sudo \
gdb \
xz-utils \
g++-arm-linux-gnueabihf \
g++-aarch64-linux-gnu
ENV SCCACHE_DIGEST=7237e38e029342fa27b7ac25412cb9d52554008b12389727320bd533fd7f05b6a96d55485f305caf95e5c8f5f97c3313e10012ccad3e752aba2518f3522ba783
RUN curl -L https://api.pub.build.mozilla.org/tooltool/sha512/$SCCACHE_DIGEST | \
tar xJf - -C /usr/local/bin --strip-components=1
RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-init_1.2.0_amd64.deb && \
dpkg -i dumb-init_*.deb && \
rm dumb-init_*.deb
ENTRYPOINT ["/usr/bin/dumb-init", "--"]
ENV RUST_CONFIGURE_ARGS \
--host=armv7-unknown-linux-gnueabihf,aarch64-unknown-linux-gnu
ENV SCRIPT \
python2.7 ../x.py dist \
--host armv7-unknown-linux-gnueabihf \
--target armv7-unknown-linux-gnueabihf \
--host aarch64-unknown-linux-gnu \
--target aarch64-unknown-linux-gnu

View File

@ -15,7 +15,8 @@ RUN apt-get update && apt-get install -y --no-install-recommends \
wget
COPY build-toolchain.sh /tmp/
RUN sh /tmp/build-toolchain.sh
RUN /tmp/build-toolchain.sh x86_64
RUN /tmp/build-toolchain.sh i686
RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-init_1.2.0_amd64.deb && \
dpkg -i dumb-init_*.deb && \
@ -29,10 +30,16 @@ RUN curl -L https://api.pub.build.mozilla.org/tooltool/sha512/$SCCACHE_DIGEST |
ENV \
AR_x86_64_unknown_freebsd=x86_64-unknown-freebsd10-ar \
CC_x86_64_unknown_freebsd=x86_64-unknown-freebsd10-gcc \
CXX_x86_64_unknown_freebsd=x86_64-unknown-freebsd10-g++
CXX_x86_64_unknown_freebsd=x86_64-unknown-freebsd10-g++ \
AR_i686_unknown_freebsd=i686-unknown-freebsd10-ar \
CC_i686_unknown_freebsd=i686-unknown-freebsd10-gcc \
CXX_i686_unknown_freebsd=i686-unknown-freebsd10-g++
ENV RUST_CONFIGURE_ARGS --host=x86_64-unknown-freebsd
ENV RUST_CONFIGURE_ARGS \
--host=x86_64-unknown-freebsd,i686-unknown-freebsd
ENV SCRIPT \
python2.7 ../x.py dist \
--host x86_64-unknown-freebsd \
--target x86_64-unknown-freebsd
--target x86_64-unknown-freebsd \
--host i686-unknown-freebsd \
--target i686-unknown-freebsd

View File

@ -11,10 +11,26 @@
set -ex
ARCH=x86_64
ARCH=$1
BINUTILS=2.25.1
GCC=5.3.0
hide_output() {
set +x
on_err="
echo ERROR: An error was encountered with the build.
cat /tmp/build.log
exit 1
"
trap "$on_err" ERR
bash -c "while true; do sleep 30; echo \$(date) - building ...; done" &
PING_LOOP_PID=$!
$@ &> /tmp/build.log
trap - ERR
kill $PING_LOOP_PID
set -x
}
mkdir binutils
cd binutils
@ -22,10 +38,10 @@ cd binutils
curl https://ftp.gnu.org/gnu/binutils/binutils-$BINUTILS.tar.bz2 | tar xjf -
mkdir binutils-build
cd binutils-build
../binutils-$BINUTILS/configure \
hide_output ../binutils-$BINUTILS/configure \
--target=$ARCH-unknown-freebsd10
make -j10
make install
hide_output make -j10
hide_output make install
cd ../..
rm -rf binutils
@ -76,7 +92,7 @@ cd gcc-$GCC
mkdir ../gcc-build
cd ../gcc-build
../gcc-$GCC/configure \
hide_output ../gcc-$GCC/configure \
--enable-languages=c,c++ \
--target=$ARCH-unknown-freebsd10 \
--disable-multilib \
@ -90,7 +106,7 @@ cd ../gcc-build
--disable-libsanitizer \
--disable-libquadmath-support \
--disable-lto
make -j10
make install
hide_output make -j10
hide_output make install
cd ../..
rm -rf gcc

View File

@ -0,0 +1,34 @@
FROM ubuntu:16.04
RUN apt-get update && apt-get install -y --no-install-recommends \
g++ \
make \
file \
curl \
ca-certificates \
python2.7 \
git \
cmake \
sudo \
gdb \
xz-utils \
g++-mips-linux-gnu \
g++-mipsel-linux-gnu
ENV SCCACHE_DIGEST=7237e38e029342fa27b7ac25412cb9d52554008b12389727320bd533fd7f05b6a96d55485f305caf95e5c8f5f97c3313e10012ccad3e752aba2518f3522ba783
RUN curl -L https://api.pub.build.mozilla.org/tooltool/sha512/$SCCACHE_DIGEST | \
tar xJf - -C /usr/local/bin --strip-components=1
RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-init_1.2.0_amd64.deb && \
dpkg -i dumb-init_*.deb && \
rm dumb-init_*.deb
ENTRYPOINT ["/usr/bin/dumb-init", "--"]
ENV RUST_CONFIGURE_ARGS \
--host=mips-unknown-linux-gnu,mipsel-unknown-linux-gnu
ENV SCRIPT \
python2.7 ../x.py dist \
--host mips-unknown-linux-gnu \
--target mips-unknown-linux-gnu \
--host mipsel-unknown-linux-gnu \
--target mipsel-unknown-linux-gnu

View File

@ -0,0 +1,34 @@
FROM ubuntu:16.04
RUN apt-get update && apt-get install -y --no-install-recommends \
g++ \
make \
file \
curl \
ca-certificates \
python2.7 \
git \
cmake \
sudo \
gdb \
xz-utils \
g++-mips64-linux-gnuabi64 \
g++-mips64el-linux-gnuabi64
ENV SCCACHE_DIGEST=7237e38e029342fa27b7ac25412cb9d52554008b12389727320bd533fd7f05b6a96d55485f305caf95e5c8f5f97c3313e10012ccad3e752aba2518f3522ba783
RUN curl -L https://api.pub.build.mozilla.org/tooltool/sha512/$SCCACHE_DIGEST | \
tar xJf - -C /usr/local/bin --strip-components=1
RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-init_1.2.0_amd64.deb && \
dpkg -i dumb-init_*.deb && \
rm dumb-init_*.deb
ENTRYPOINT ["/usr/bin/dumb-init", "--"]
ENV RUST_CONFIGURE_ARGS \
--host=mips64-unknown-linux-gnuabi64,mips64el-unknown-linux-gnuabi64
ENV SCRIPT \
python2.7 ../x.py dist \
--host mips64-unknown-linux-gnuabi64 \
--target mips64-unknown-linux-gnuabi64 \
--host mips64el-unknown-linux-gnuabi64 \
--target mips64el-unknown-linux-gnuabi64

View File

@ -0,0 +1,35 @@
FROM ubuntu:16.04
RUN apt-get update && apt-get install -y --no-install-recommends \
g++ \
make \
file \
curl \
ca-certificates \
python2.7 \
git \
cmake \
sudo \
gdb \
xz-utils \
g++-powerpc-linux-gnu
ENV SCCACHE_DIGEST=7237e38e029342fa27b7ac25412cb9d52554008b12389727320bd533fd7f05b6a96d55485f305caf95e5c8f5f97c3313e10012ccad3e752aba2518f3522ba783
RUN curl -L https://api.pub.build.mozilla.org/tooltool/sha512/$SCCACHE_DIGEST | \
tar xJf - -C /usr/local/bin --strip-components=1
RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-init_1.2.0_amd64.deb && \
dpkg -i dumb-init_*.deb && \
rm dumb-init_*.deb
ENTRYPOINT ["/usr/bin/dumb-init", "--"]
ENV RUST_CONFIGURE_ARGS \
--host=powerpc-unknown-linux-gnu
ENV SCRIPT \
python2.7 ../x.py dist \
--host powerpc-unknown-linux-gnu \
--target powerpc-unknown-linux-gnu
# FIXME(#36150) this will fail the bootstrap. Probably means something bad is
# happening!
ENV NO_LLVM_ASSERTIONS 1

View File

@ -0,0 +1,39 @@
FROM ubuntu:16.04
RUN apt-get update && apt-get install -y --no-install-recommends \
g++ \
make \
file \
curl \
ca-certificates \
python2.7 \
git \
cmake \
sudo \
gdb \
xz-utils \
g++-powerpc64-linux-gnu \
g++-powerpc64le-linux-gnu
ENV SCCACHE_DIGEST=7237e38e029342fa27b7ac25412cb9d52554008b12389727320bd533fd7f05b6a96d55485f305caf95e5c8f5f97c3313e10012ccad3e752aba2518f3522ba783
RUN curl -L https://api.pub.build.mozilla.org/tooltool/sha512/$SCCACHE_DIGEST | \
tar xJf - -C /usr/local/bin --strip-components=1
RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-init_1.2.0_amd64.deb && \
dpkg -i dumb-init_*.deb && \
rm dumb-init_*.deb
ENTRYPOINT ["/usr/bin/dumb-init", "--"]
ENV \
AR_powerpc64_unknown_linux_gnu=powerpc64-linux-gnu-ar \
CC_powerpc64_unknown_linux_gnu=powerpc64-linux-gnu-gcc \
CXX_powerpc64_unknown_linux_gnu=powerpc64-linux-gnu-g++
ENV RUST_CONFIGURE_ARGS \
--host=powerpc64-unknown-linux-gnu,powerpc64le-unknown-linux-gnu
ENV SCRIPT \
python2.7 ../x.py dist \
--host powerpc64-unknown-linux-gnu \
--target powerpc64-unknown-linux-gnu \
--host powerpc64le-unknown-linux-gnu \
--target powerpc64le-unknown-linux-gnu

View File

@ -0,0 +1,43 @@
FROM ubuntu:16.04
RUN apt-get update && apt-get install -y --no-install-recommends \
g++ \
make \
file \
curl \
ca-certificates \
python2.7 \
git \
cmake \
sudo \
bzip2 \
xz-utils \
wget \
patch \
g++-s390x-linux-gnu
COPY build-toolchain.sh /tmp/
RUN sh /tmp/build-toolchain.sh
RUN curl -OL https://github.com/Yelp/dumb-init/releases/download/v1.2.0/dumb-init_1.2.0_amd64.deb && \
dpkg -i dumb-init_*.deb && \
rm dumb-init_*.deb
ENTRYPOINT ["/usr/bin/dumb-init", "--"]
ENV SCCACHE_DIGEST=7237e38e029342fa27b7ac25412cb9d52554008b12389727320bd533fd7f05b6a96d55485f305caf95e5c8f5f97c3313e10012ccad3e752aba2518f3522ba783
RUN curl -L https://api.pub.build.mozilla.org/tooltool/sha512/$SCCACHE_DIGEST | \
tar xJf - -C /usr/local/bin --strip-components=1
ENV \
AR_x86_64_unknown_netbsd=x86_64-unknown-netbsd-ar \
CC_x86_64_unknown_netbsd=x86_64-unknown-netbsd-gcc \
CXX_x86_64_unknown_netbsd=x86_64-unknown-netbsd-g++
ENV RUST_CONFIGURE_ARGS \
--host=x86_64-unknown-netbsd,s390x-unknown-linux-gnu
ENV SCRIPT \
python2.7 ../x.py dist \
--host x86_64-unknown-netbsd \
--target x86_64-unknown-netbsd \
--host s390x-unknown-linux-gnu \
--target s390x-unknown-linux-gnu

View File

@ -0,0 +1,116 @@
#!/bin/bash
# Copyright 2016 The Rust Project Developers. See the COPYRIGHT
# file at the top-level directory of this distribution and at
# http://rust-lang.org/COPYRIGHT.
#
# Licensed under the Apache License, Version 2.0 <LICENSE-APACHE or
# http://www.apache.org/licenses/LICENSE-2.0> or the MIT license
# <LICENSE-MIT or http://opensource.org/licenses/MIT>, at your
# option. This file may not be copied, modified, or distributed
# except according to those terms.
# ignore-tidy-linelength
set -ex
BINUTILS=2.25.1
GCC=5.3.0
# First up, build binutils
mkdir binutils
cd binutils
curl https://ftp.gnu.org/gnu/binutils/binutils-$BINUTILS.tar.bz2 | tar xjf -
mkdir binutils-build
cd binutils-build
../binutils-$BINUTILS/configure \
--target=x86_64-unknown-netbsd
make -j10
make install
cd ../..
rm -rf binutils
# Next, download the NetBSD libc and relevant header files
mkdir netbsd
curl https://ftp.netbsd.org/pub/NetBSD/NetBSD-7.0/amd64/binary/sets/base.tgz | \
tar xzf - -C netbsd ./usr/include ./usr/lib ./lib
curl https://ftp.netbsd.org/pub/NetBSD/NetBSD-7.0/amd64/binary/sets/comp.tgz | \
tar xzf - -C netbsd ./usr/include ./usr/lib
dst=/usr/local/x86_64-unknown-netbsd
cp -r netbsd/usr/include $dst
cp netbsd/usr/lib/crt0.o $dst/lib
cp netbsd/usr/lib/crti.o $dst/lib
cp netbsd/usr/lib/crtn.o $dst/lib
cp netbsd/usr/lib/crtbeginS.o $dst/lib
cp netbsd/usr/lib/crtendS.o $dst/lib
cp netbsd/usr/lib/crtbegin.o $dst/lib
cp netbsd/usr/lib/crtend.o $dst/lib
cp netbsd/usr/lib/gcrt0.o $dst/lib
cp netbsd/usr/lib/libc.a $dst/lib
cp netbsd/usr/lib/libc_p.a $dst/lib
cp netbsd/usr/lib/libc_pic.a $dst/lib
cp netbsd/lib/libc.so.12.193.1 $dst/lib
cp netbsd/lib/libutil.so.7.21 $dst/lib
cp netbsd/usr/lib/libm.a $dst/lib
cp netbsd/usr/lib/libm_p.a $dst/lib
cp netbsd/usr/lib/libm_pic.a $dst/lib
cp netbsd/lib/libm.so.0.11 $dst/lib
cp netbsd/usr/lib/librt.so.1.1 $dst/lib
cp netbsd/usr/lib/libpthread.a $dst/lib
cp netbsd/usr/lib/libpthread_p.a $dst/lib
cp netbsd/usr/lib/libpthread_pic.a $dst/lib
cp netbsd/usr/lib/libpthread.so.1.2 $dst/lib
ln -s libc.so.12.193.1 $dst/lib/libc.so
ln -s libc.so.12.193.1 $dst/lib/libc.so.12
ln -s libm.so.0.11 $dst/lib/libm.so
ln -s libm.so.0.11 $dst/lib/libm.so.0
ln -s libutil.so.7.21 $dst/lib/libutil.so
ln -s libutil.so.7.21 $dst/lib/libutil.so.7
ln -s libpthread.so.1.2 $dst/lib/libpthread.so
ln -s libpthread.so.1.2 $dst/lib/libpthread.so.1
ln -s librt.so.1.1 $dst/lib/librt.so
rm -rf netbsd
# Finally, download and build gcc to target NetBSD
mkdir gcc
cd gcc
curl https://ftp.gnu.org/gnu/gcc/gcc-$GCC/gcc-$GCC.tar.bz2 | tar xjf -
cd gcc-$GCC
./contrib/download_prerequisites
# Originally from
# ftp://ftp.netbsd.org/pub/pkgsrc/pkgsrc-2016Q4/pkgsrc/lang/gcc5/patches/patch-libstdc%2B%2B-v3_config_os_bsd_netbsd_ctype__base.h
PATCHES="https://s3.amazonaws.com/rust-lang-ci/rust-ci-mirror/2017-01-13-netbsd-patch1.patch"
# Originally from
# ftp://ftp.netbsd.org/pub/pkgsrc/pkgsrc-2016Q4/pkgsrc/lang/gcc5/patches/patch-libstdc%2B%2B-v3_config_os_bsd_netbsd_ctype__configure__char.cc
PATCHES="$PATCHES https://s3.amazonaws.com/rust-lang-ci/rust-ci-mirror/2017-01-13-netbsd-patch2.patch"
for patch in $PATCHES; do
curl $patch | patch -Np0
done
mkdir ../gcc-build
cd ../gcc-build
../gcc-$GCC/configure \
--enable-languages=c,c++ \
--target=x86_64-unknown-netbsd \
--disable-libcilkrts \
--disable-multilib \
--disable-nls \
--disable-libgomp \
--disable-libquadmath \
--disable-libssp \
--disable-libvtv \
--disable-libcilkrt \
--disable-libada \
--disable-libsanitizer \
--disable-libquadmath-support \
--disable-lto
make -j10
make install
cd ../..
rm -rf gcc

View File

@ -25,8 +25,10 @@ docker \
-t rust-ci \
"`dirname "$script"`/$image"
objdir=$root_dir/obj
mkdir -p $HOME/.cargo
mkdir -p $root_dir/obj
mkdir -p $objdir
args=
if [ "$SCCACHE_BUCKET" != "" ]; then
@ -41,7 +43,7 @@ fi
exec docker \
run \
--volume "$root_dir:/checkout:ro" \
--volume "$root_dir/obj:/checkout/obj" \
--volume "$objdir:/checkout/obj" \
--workdir /checkout/obj \
--env SRC=/checkout \
$args \