If a dylib is being produced, the compiler will now first check to see if it can
be created entirely statically before falling back to dynamic dependencies. This
behavior can be overridden with `-C prefer-dynamic`.
Due to the alteration in behavior, this is a breaking change. Any previous users
relying on dylibs implicitly maximizing dynamic dependencies should start
passing `-C prefer-dynamic` to compilations.
Closes#18499
[breaking-change]
When building for multiple targets, the initial 'make' invocation
always fails. The missing build stamp causes clean-llvm to be
invoked, but clean-llvm cleans *all* llvm builds. So what happens
is that 1) all llvm's are cleaned (a no-op), 2) llvm-${target1}
builds, 3) all llvm's are cleaned (deleting llvm-${target1}),
4) llvm-${target2} is built, 5) the remaining build for ${target1}
fails because llvm does not exist.
This makes the clean operation only clean the correct llvm build.
Should greatly reduce bot failures.
Enable parallel codegen (2 units) by default when --opt-level is 0 or 1. This
gives a minor speedup on large crates (~10%), with only a tiny slowdown (~2%)
for small ones (which usually build in under a second regardless). The current
default (no parallelization) is used when the user requests optimization
(--opt-level 2 or 3), and when the user has enabled LTO (which is incompatible
with parallel codegen).
This commit also changes the rust build system to use parallel codegen
when appropriate. This means codegen-units=4 for stage0 always, and
also for stage1 and stage2 when configured with --disable-optimize.
(Other settings use codegen-units=1 for stage1 and stage2, to get
maximum performance for release binaries.) The build system also sets
codegen-units=1 for compiletest tests (compiletest does its own
parallelization) and uses the same setting as stage2 for crate tests.
All of these crates have been deprecated for some time and properly live in the
rust-lang organization as cargo-based crates.
To update your code, depend on the rust-lang/foo repository via cargo.
[breaking-change]
When running `sudo make install`, we only want to run the actual install
as root, the building of the documentation and the distribution folder
should happen as the non-root user.
Related to #13728.
----
To reproduce issue on commit ba246100ca
it does not suffice to add just `check-build-compiletest` to
`check-secondary`; one must also ensure that `check-build-compiletest`
precedes the satisification of the `check` rule.
Otherwise hidden dependencies of `compiletest` would end up getting
satisfied when make builds `rustc` at each stage in order to
eventually run `check-stage2`.
So to handle that I moved `check-secondary` before `check` in the
`check-all` rule that bors uses, and for good measure, I also put
`check-build-compiltest` at the front of the `check-secondary` rule's
dependencies.
My understanding is that running `check-secondary` should be
relatively cheap, and thus such a reordering will not hurt bors.
----
Fix#17883.
compiletest needs to link to native crate, or at least the `rt` library.
(I tried using a dependency on `rustrt` instead, and that did not resolve the problem. But this does.)
Partially addresses #17883
The escaped newline in the middle of the variable reference breaks the
short hash substitution, leaving the link text exmpty; rewrap so that
each replacement is on its own line.
The escaped newline in the middle of the variable reference breaks the
short hash substitution, leaving the link text exmpty; rewrap so that
each replacement is on its own line.
Remove superfluous parentheses from the CTAGS_LOCATIONS expression.
Fixes the following error when executing `make TAGS.vi`:
/bin/sh: -c: line 0: syntax error near unexpected token `)'
This commit removes the libuv and gyp submodules, as well as all build
infrastructure related to them.
For more context, see the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230)
[breaking-change]
This commit removes the `librustuv` crate.
See the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230) for more context.
See [green-rs](https://github.com/alexcrichton/green-rs/) for a possible
migration path if you wish to continue using green-threaded I/O. The
library provides its own I/O API surface.
[breaking-change]
This makes the windows `make dist` target start producing binary tarballs, and tweaks install.sh so they work, in preparation for working on a combined Rust+Cargo installer.
Setting LC_ALL to C helps keep gdb's output consistent ('print' gives us expected output). This fixes#17423. I do not have access to a windows/mac machines to test this. I've only tested it on an x86_64 linux box.
Right now, libuv will **always** be built for the host system (at least when building on OSX) because the information about the cross compiler is never actually passed to GYP. I don't know how anybody has been managing to build cross compilers with this.
Note that, at least on OSX, there is a bug in GYP that will send clang flags to non-clang compilers and it will still attempt to use Xcode's libtool, so this doesn't completely fix the problem of cross-compiling on an OSX host, but it's a start.
Adds a new configure flag, --release-channel, which determines how the version
number should be augmented with a release label, as well as how the distribution
artifacts will be named. This is entirely for use by the build automation.
--release-channel can be either 'source', 'nightly', 'beta', or 'stable'.
Here's a summary of the affect of these values on version number and
artifact naming, respectively:
* source - '0.12.0-pre', 'rust-0.12.0-pre-...'
* nightly - '0.12.0-nightly', 'rust-nightly-...'
* beta - '0.12.0-beta', 'rust-beta-...'
* stable - '0.12.0', 'rust-0.12.0-...'
Per http://discuss.rust-lang.org/t/rfc-impending-changes-to-the-release-process/508/1
This updates our build system to prefer `i686-w64-mingw32` as the 32-bit windows triple instead of `i686-pc-mingw32`. This is an interim step to make the build artifacts consistent until https://github.com/rust-lang/rust/issues/15717 is done.
The Guide isn't 100% perfect, but it's basically complete. It's
certainly better than the tutorial is. Time to start pointing more
people its way.
I also just made it consistent to call all things 'guides' rather than
tutorials.
Fixes#9874. This is the big one.
And two bugs that just go away.
Fixes#14503.
Fixes#15009.
The Guide isn't 100% perfect, but it's basically complete. It's
certainly better than the tutorial is. Time to start pointing more
people its way.
I also just made it consistent to call all things 'guides' rather than
tutorials.
Fixes#9874. This is the big one.
And two bugs that just go away.
Fixes#14503.
Fixes#15009.
gcc, ld, ar, dlltool, windres go into $(RUST)/bin/rustlib/<triple>/bin/
platform libraries and startup objects got into $(RUST)/bin/rustlib/<triple>/lib/
Bugs in pdflatex (#12804) are preventing the guide from landing (https://github.com/rust-lang/rust/pull/16657). This solves the immediate problem by changing the build system to prefer lualatex, xelatex to pdflatex (which is apparently obsolete). Because the xelatex on the snapshot bot seems to completely ignore the `-output-directory` option, I also had to frob the makefiles a bit for that case.
This builds on https://github.com/rust-lang/rust/pull/17109, putting the target triple into the installer name so that we can have both 32-bit and 64-bit.
The resulting installers will be called `rust-0.12.0-pre-x86_64-w64-mingw32.exe`, etc.
Currently `./configure --llvm-root=...` and similar flags will break incremental builds by forcing reconfiguration on every `make`. This happens because `reconfig.mk` incorrectly treats submodules in the `-` (uninitialized) state as requiring reconfiguration, and `./configure` deliberately deinitializes unneeded submodules. The fix is to reconfigure only when submodules are in the `+` state (wrong commit checked out).
The performance hit from these checks is significant, but unoptimized
builds are already incredibly slow. Enabling these checks results in
better test coverage since there are bots doing unoptimized builds, and
the cost is relatively small in the context of an unoptimized build.
This also allows using `JEMALLOC_FLAGS` to override the default
configure flags.
When running `sudo make install`, we only want to run the actual install
as root, the building of the documentation and the distribution folder
should happen as the non-root user.
Related to #13728.
Our implementation of ebml has diverged from the standard in order
to better serve the needs of the compiler, so it doesn't make much
sense to call what we have ebml anyore. Furthermore, our implementation
is pretty crufty, and should eventually be rewritten into a format
that better suits the needs of the compiler. This patch factors out
serialize::ebml into librbml, otherwise known as the Really Bad
Markup Language. This is a stopgap library that shouldn't be used
by end users, and will eventually be replaced by something better.
[breaking-change]
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
We'll use this to run a subset of the test suite onto a dedicated
bot.
This puts the grammar tests and the pretty-printer tests under
check-secondary. It leanves the pretty tests under plain `check`
for now, until the new bot is added to take over.
Because check-secondary is not run as part of `make check` there
will be a set of tests that most users never run and are only
checked by bors. I think this will be ok because grammar tests
should rarely regress, and the people regressing such tests
should have the fortitude to deal with it.
The alignment of the line continuation backslashes is rather inconsistent. These commits solve that by removing the extra whitespace and adding a space where there previously was none. An alternative solution would be to fix the alignment.
