Backtraces, and the compilation of libbacktrace for asmjs, are disabled.
This port doesn't use jemalloc so, like pnacl, it disables jemalloc *for all targets*
in the configure file.
It disables stack protection.
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes#21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
Currently any compilation to MIPS spits out the warning:
'generic' is not a recognized processor for this target (ignoring processor)
Doesn't make for a great user experience! We don't encounter this in the normal
bootstrap because the cpu/feature set are set by the makefiles. Instead let's
just propagate these to the defaults for the entire target all the time (still
overridable from the command line) and prevent warnings from being emitted by
default.
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
r? @alexcrichton
Currently any compilation to MIPS spits out the warning:
'generic' is not a recognized processor for this target (ignoring processor)
Doesn't make for a great user experience! We don't encounter this in the normal
bootstrap because the cpu/feature set are set by the makefiles. Instead let's
just propagate these to the defaults for the entire target all the time (still
overridable from the command line) and prevent warnings from being emitted by
default.
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
The cross prefix was not likely the actual compiler that needed to be used, but
rather the standard `arm-linux-gnueabihf-gcc` compiler can just be used with
`-march=armv7`.
Unfortunately older clang compilers don't support this argument, so the
bootstrap will fail. We don't actually really need to optimized the C code we
compile, however, as currently we're just compiling jemalloc and not much else.
Unfortunately older clang compilers don't support this argument, so the
bootstrap will fail. We don't actually really need to optimized the C code we
compile, however, as currently we're just compiling jemalloc and not much else.
this PR reverts previous ones, that tried to make `cc` to found `estdc++` in `/usr/local/lib`. It causes more trouble than it resolvs things: rustc become unbuildable if another version already exists in `/usr/local` (for example, `libstd-xxxx.so` is found in `/usr/local/lib` and in builddir).
so this PR tries another way to achieve build, but using the good linker for building. By default, rustc use `cc` for linking. But under OpenBSD, `cc` is gcc 4.2.1 from base, whereas we build with gcc 4.9 from ports. By linking using the compiler found at compile-time, we ensure that the compiler will found his own stdc++ library without trouble.
r? @alexcrichton
By default, rustc use `cc` as linker. Under OpenBSD, `cc` is gcc version 4.2.1.
So use the compiler found at configure-time for linking: it will be gcc 4.9.
It permits to resolv problem of finding -lestdc++ or -lgcc. For base gcc (4.2), there are in not standard path, whereas for ports gcc (4.9) there are in standard path.
The `rsbegin.o` and `rsend.o` build products should not be generated
on non WinGnu platforms.
This is another path to resolving #30063 for non win-gnu targets.
(And it won't require a snapshot, unlike PR #30208.)
Note: for now, this change only affects `-windows-gnu` builds.
So why was this `libgcc` dylib dependency needed in the first place?
The stack unwinder needs to know about locations of unwind tables of all the modules loaded in the current process. The easiest portable way of achieving this is to have each module register itself with the unwinder when loaded into the process. All modules compiled by GCC do this by calling the __register_frame_info() in their startup code (that's `crtbegin.o` and `crtend.o`, which are automatically linked into any gcc output).
Another important piece is that there should be only one copy of the unwinder (and thus unwind tables registry) in the process. This pretty much means that the unwinder must be in a shared library (unless everything is statically linked).
Now, Rust compiler tries very hard to make sure that any given Rust crate appears in the final output just once. So if we link the unwinder statically to one of Rust's crates, everything should be fine.
Unfortunately, GCC startup objects are built under assumption that `libgcc` is the one true place for the unwind info registry, so I couldn't find any better way than to replace them. So out go `crtbegin`/`crtend`, in come `rsbegin`/`rsend`!
A side benefit of this change is that rustc is now more in control of the command line that goes to the linker, so we could stop using `gcc` as the linker driver and just invoke `ld` directly.
Since it isn't possible to disable linkage of just GCC startup objects, we now need logic for finding libc installation directory and copying the required startup files (e.g. crt2.o) to rustlib directory.
Bonus change: use the `-nodefaultlibs` flag on Windows, thus paving the way to direct linker invocation.
* Don't pass `-mno-compact-eh`, apparently not all compilers have this?
* Don't pass `+o32`, apparently LLVm doesn't recognize this
* Use `mipsel-linux-gnu` as a prefix instead of `mipsel-unknown-linux-gnu`, this
matches the ubuntu package at least!
For most parts, rumprun currently looks like NetBSD, as they share the same
libc and drivers. However, being a unikernel, rumprun does not support
process management, signals or virtual memory, so related functions
might fail at runtime. Stack guards are disabled exactly for this reason.
Code for rumprun is always cross-compiled, it uses always static
linking and needs a custom linker.
This commit modifies the configure script and our makefiles to support building
32-bit MSVC targets. The MSVC toolchain is now parameterized over whether it can
produce a 32-bit or 64-bit binary. The configure script was updated to export
more variables at configure time, and the makefiles were rejiggered to
selectively reexport the relevant environment variables for the applicable
targets they're going to run for.
Right now the distribution tarball for MSVC only includes the *.dll files for
the supporting libraries, but not the corresponding *.lib files which allow
actually linking to the dll. This means that the current MSVC nightlies cannot
produce dynamically linked binaries as the *.lib files are not available to link
against.
This commit modifies the `LIB_GLOB` used to copy the files around to include the
`lib` variant of the `dll`.
On MSVC there are two ways that the CRT can be linked, either statically or
dynamically. Each object file produced by the compiler is compiled against
msvcrt (a dll) or libcmt (a static library). When the linker is dealing with
more than one object file, it requires that all object files link to the same
CRT, or else the linker will spit out some errors.
For now, compile code with `-MD` as it seems to appear more often in C libraries
so we'll stick with the same trend.
Now that MSVC support has landed in the most recent nightlies we can now have
MSVC bootstrap itself without going through a GNU compiler first. Unfortunately,
however, the bootstrap currently fails due to the compiler not being able to
find the llvm-ar.exe tool during the stage0 libcore compile. The compiler cannot
find this tool because it's looking inside a directory that does not exist:
$SYSROOT/rustlib/x86_64-pc-windows-gnu/bin
The `gnu` on this triple is because the bootstrap compiler's host architecture
is GNU. The build system, however, only arranges for the llvm-ar.exe tool to be
available in this location:
$SYSROOT/rustlib/x86_64-pc-windows-msvc/bin
To resolve this discrepancy, the build system has been modified to understand
triples that are bootstrapped from another triple, and in this case copy the
native tools to the right location.
Now that MSVC support has landed in the most recent nightlies we can now have
MSVC bootstrap itself without going through a GNU compiler first. Unfortunately,
however, the bootstrap currently fails due to the compiler not being able to
find the llvm-ar.exe tool during the stage0 libcore compile. The compiler cannot
find this tool because it's looking inside a directory that does not exist:
$SYSROOT/rustlib/x86_64-pc-windows-gnu/bin
The `gnu` on this triple is because the bootstrap compiler's host architecture
is GNU. The build system, however, only arranges for the llvm-ar.exe tool to be
available in this location:
$SYSROOT/rustlib/x86_64-pc-windows-msvc/bin
To resolve this discrepancy, the build system has been modified to understand
triples that are bootstrapped from another triple, and in this case copy the
native tools to the right location.
