They were originally called "opt-in, built-in traits" (OIBITs), but
people realized that the name was too confusing and a mouthful, and so
they were renamed to just "auto traits". The feature flag's name wasn't
updated, though, so that's what this PR does.
There are some other spots in the compiler that still refer to OIBITs,
but I don't think changing those now is worth it since they are internal
and not particularly relevant to this PR.
Also see <https://rust-lang.zulipchat.com/#narrow/stream/131828-t-compiler/topic/opt-in.2C.20built-in.20traits.20(auto.20traits).20feature.20name>.
This is a squash of these commits:
- Update E0744 about control flow in `const` contexts to reflect current status of `const fn`.
- E0744 isn't just about `for` loops or control flow
- Fix formatting on E0744 cause my editor decided to not copy it well
- Improve wording
- Fix a markdown formatting error
- Fix E0744's description as I interpreted some code wrong
- Fix a minor wording issue again
- Add a few more links to blocking issues
- Improve links to tracking issues
Deny broken intra-doc links in linkchecker
Since rustdoc isn't warning about these links, check for them manually.
This also fixes the broken links that popped up from the lint.
Stabilize move_ref_pattern
# Implementation
- Initially the rule was added in the run-up to 1.0. The AST-based borrow checker was having difficulty correctly enforcing match expressions that combined ref and move bindings, and so it was decided to simplify forbid the combination out right.
- The move to MIR-based borrow checking made it possible to enforce the rules in a finer-grained level, but we kept the rule in place in an effort to be conservative in our changes.
- In #68376, @Centril lifted the restriction but required a feature-gate.
- This PR removes the feature-gate.
Tracking issue: #68354.
# Description
This PR is to stabilize the feature `move_ref_pattern`, which allows patterns
containing both `by-ref` and `by-move` bindings at the same time.
For example: `Foo(ref x, y)`, where `x` is `by-ref`,
and `y` is `by-move`.
The rules of moving a variable also apply here when moving *part* of a variable,
such as it can't be referenced or moved before.
If this pattern is used, it would result in *partial move*, which means that
part of the variable is moved. The variable that was partially moved from
cannot be used as a whole in this case, only the parts that are still
not moved can be used.
## Documentation
- The reference (rust-lang/reference#881)
- Rust by example (rust-lang/rust-by-example#1377)
## Tests
There are many tests, but I think one of the comperhensive ones:
- [borrowck-move-ref-pattern-pass.rs](85fbf49ce0/src/test/ui/pattern/move-ref-patterns/borrowck-move-ref-pattern-pass.rs)
- [borrowck-move-ref-pattern.rs](85fbf49ce0/src/test/ui/pattern/move-ref-patterns/borrowck-move-ref-pattern.rs)
# Examples
```rust
#[derive(PartialEq, Eq)]
struct Finished {}
#[derive(PartialEq, Eq)]
struct Processing {
status: ProcessStatus,
}
#[derive(PartialEq, Eq)]
enum ProcessStatus {
One,
Two,
Three,
}
#[derive(PartialEq, Eq)]
enum Status {
Finished(Finished),
Processing(Processing),
}
fn check_result(_url: &str) -> Status {
// fetch status from some server
Status::Processing(Processing {
status: ProcessStatus::One,
})
}
fn wait_for_result(url: &str) -> Finished {
let mut previous_status = None;
loop {
match check_result(url) {
Status::Finished(f) => return f,
Status::Processing(p) => {
match (&mut previous_status, p.status) {
(None, status) => previous_status = Some(status), // first status
(Some(previous), status) if *previous == status => {} // no change, ignore
(Some(previous), status) => { // Now it can be used
// new status
*previous = status;
}
}
}
}
}
}
```
Before, we would have used:
```rust
match (&previous_status, p.status) {
(Some(previous), status) if *previous == status => {} // no change, ignore
(_, status) => {
// new status
previous_status = Some(status);
}
}
```
Demonstrating *partial move*
```rust
fn main() {
#[derive(Debug)]
struct Person {
name: String,
age: u8,
}
let person = Person {
name: String::from("Alice"),
age: 20,
};
// `name` is moved out of person, but `age` is referenced
let Person { name, ref age } = person;
println!("The person's age is {}", age);
println!("The person's name is {}", name);
// Error! borrow of partially moved value: `person` partial move occurs
//println!("The person struct is {:?}", person);
// `person` cannot be used but `person.age` can be used as it is not moved
println!("The person's age from person struct is {}", person.age);
}
```
Give `impl Trait` in a `const fn` its own feature gate
...previously it was gated under `#![feature(const_fn)]`.
I think we actually want to do this in all const-contexts? If so, this should be `#![feature(const_impl_trait)]` instead. I don't think there's any way to make use of `impl Trait` within a `const` initializer.
cc #77463
r? `@oli-obk`
Overhaul const-checking diagnostics
The primary purpose of this PR was to remove `NonConstOp::STOPS_CONST_CHECKING`, which causes any additional errors found by the const-checker to be silenced. I used this flag to preserve diagnostic parity with `qualify_min_const_fn.rs`, which has since been removed.
However, simply removing the flag caused a deluge of errors in some cases, since an error would be emitted any time a local or temporary had a wrong type. To remedy this, I added an alternative system (`DiagnosticImportance`) to silence additional error messages that were likely to distract the user from the underlying issue. When an error of the highest importance occurs, all less important errors are silenced. When no error of the highest importance occurs, all less important errors are emitted after checking is complete. Following the suggestions from the important error is usually enough to fix the less important errors, so this should lead to better UX most of the time.
There's also some unrelated diagnostics improvements in this PR isolated in their own commits. Splitting them out would be possible, but a bit of a pain. This isn't as tidy as some of my other PRs, but it should *only* affect diagnostics, never whether or not something passes const-checking. Note that there are a few trivial exceptions to this, like banning `Yield` in all const-contexts, not just `const fn`.
As always, meant to be reviewed commit-by-commit.
r? `@oli-obk`
This patch adds support for the LLVM cmse_nonsecure_entry attribute.
This is a target-dependent attribute that only has sense for the
thumbv8m Rust targets.
You can find more information about this attribute here:
https://developer.arm.com/documentation/ecm0359818/latest/
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Improve unresolved use error message
"use of undeclared type or module `foo`" doesn't mention that it could be a crate.
This error can happen when users forget to add a dependency to `Cargo.toml`, so I think it's important to mention that it could be a missing crate.
I've used a heuristic based on Rust's naming conventions. It complains about an unknown type if the ident starts with an upper-case letter, and crate or module otherwise. It seems to work very well. The expanded error help covers both an unknown type and a missing crate case.
Add derive macro for specifying diagnostics using attributes.
Introduces `#[derive(SessionDiagnostic)]`, a derive macro for specifying structs that can be converted to Diagnostics using directions given by attributes on the struct and its fields. Currently, the following attributes have been implemented:
- `#[code = "..."]` -- this sets the Diagnostic's error code, and must be provided on the struct iself (ie, not on a field). Equivalent to calling `code`.
- `#[message = "..."]` -- this sets the Diagnostic's primary error message.
- `#[label = "..."]` -- this must be applied to fields of type `Span`, and is equivalent to `span_label`
- `#[suggestion(..)]` -- this allows a suggestion message to be supplied. This attribute must be applied to a field of type `Span` or `(Span, Applicability)`, and is equivalent to calling `span_suggestion`. Valid arguments are:
- `message = "..."` -- this sets the suggestion message.
- (Optional) `code = "..."` -- this suggests code for the suggestion. Defaults to empty.
`suggestion`also comes with other variants: `#[suggestion_short(..)]`, `#[suggestion_hidden(..)]` and `#[suggestion_verbose(..)]` which all take the same keys.
Within the strings passed to each attribute, fields can be referenced without needing to be passed explicitly into the format string -- eg, `#[error = "{ident} already declared"] ` will set the error message to `format!("{} already declared", &self.ident)`. Any fields on the struct can be referenced in this way.
Additionally, for any of these attributes, Option fields can be used to only optionally apply the decoration -- for example:
```rust
#[derive(SessionDiagnostic)]
#[code = "E0123"]
struct SomeKindOfError {
...
#[suggestion(message = "informative error message")]
opt_sugg: Option<(Span, Applicability)>
...
}
```
will not emit a suggestion if `opt_sugg` is `None`.
We plan on iterating on this macro further; this PR is a start.
Closes#61132.
r? `@oli-obk`
Give a better error message for duplicate built-in macros
Minor follow-up to https://github.com/rust-lang/rust/pull/75176 giving a better error message for duplicate builtin macros. This would have made it a little easier to debug.
r? @petrochenkov
Previously, this would say no such macro existed, but this was
misleading, since the macro _did_ exist, it was just already seen.
- Say where the macro was previously defined
- Add long-form error message
Camelid
James
Joshua Nelson
Yuki Okushi
Olivier FAURE
Dylan DPC
Naoki Hayama
xd009642
bors
Dylan MacKenzie
Matthew Jasper
Guillaume Gomez
Hugues de Valon
Jonas Schievink
Ralf Jung
Lzu Tao
Niclas Schwarzlose
Amjad Alsharafi
Tyler Mandry
Kornel
jumbatm
mark