Deprecate atomic compare_and_swap method
Finish implementing [RFC 1443](https://github.com/rust-lang/rfcs/blob/master/text/1443-extended-compare-and-swap.md) (https://github.com/rust-lang/rfcs/pull/1443).
It was decided to deprecate `compare_and_swap` [back in Rust 1.12 already](https://github.com/rust-lang/rust/issues/31767#issuecomment-215903038). I can't find any info about that decision being reverted. My understanding is just that it has been forgotten. If there has been a decision on keeping `compare_and_swap` then it's hard to find, and even if this PR does not go through it can act as a place where people can find out about the decision being reverted.
Atomic operations are hard to understand, very hard. And it does not help that there are multiple similar methods to do compare and swap with. They are so similar that for a reader it might be hard to understand the difference. This PR aims to make that simpler by finally deprecating `compare_and_swap` which is essentially just a more limited version of `compare_exchange`. The documentation is also updated (according to the RFC text) to explain the differences a bit better.
Even if we decide to not deprecate `compare_and_swap`. I still think the documentation for the atomic operations should be improved to better describe their differences and similarities. And the documentation can be written nicer than the PR currently proposes, but I wanted to start somewhere. Most of it is just copied from the RFC.
The documentation for `compare_exchange` and `compare_exchange_weak` indeed describe how they work! The problem is that they are more complex and harder to understand than `compare_and_swap`. So for someone who does not fully grasp this they might fall back to using `compare_and_swap`. Making the documentation outline the similarities and differences might build a bridge for people so they can cross over to the more powerful and sometimes more efficient operations.
The conversions I do to avoid the `std` internal deprecation errors are very straight forward `compare_and_swap -> compare_exchange` changes where the orderings are just using the mapping in the new documentation. Only in one place did I use `compare_exchange_weak`. This can probably be improved further. But the goal here was not for those operations to be perfect. Just to not get worse and to allow the deprecation to happen.
Added [T; N]::zip()
This is my first PR to rust so I hope I have done everything right, or at least close :)
---
This is PR adds the array method `[T; N]::zip()` which, in my mind, is a natural extension to #75212.
My implementation of `zip()` is mostly just a modified copy-paste of `map()`. Should I keep the comments? Also am I right in assuming there should be no way for the `for`-loop to panic, thus no need for the dropguard seen in the `map()`-function?
The doc comment is in a similar way a slightly modified copy paste of [`Iterator::zip()`](https://doc.rust-lang.org/beta/std/iter/trait.Iterator.html#method.zip)
`@jplatte` mentioned in [#75490](https://github.com/rust-lang/rust/pull/75490#issuecomment-677790758) `zip_with()`,
> zip and zip_with seem like they would be useful :)
is this something I should add (assuming there is interest for this PR at all :))
Add array search aliases
Missed this in https://github.com/rust-lang/rust/pull/80068. This one will really fix https://github.com/rust-lang/rust/issues/46075.
The last alias especially I'm a little unsure about - maybe fuzzy search should be fixed in rustdoc instead? Happy to make that change although I'd have to figure out how.
r? ``@m-ou-se`` although cc ``@GuillaumeGomez`` for the search issue.
Fix failing build of std on armv5te-unknown-linux-uclibceabi due to missing cmsg_len_zero
I'm getting the following error when trying to build `std` on `armv5te-unknown-linux-uclibceabi`:
```
error[E0425]: cannot find value `cmsg_len_zero` in this scope
--> /home/operutka/.rustup/toolchains/nightly-x86_64-unknown-linux-gnu/lib/rustlib/src/rust/library/std/src/sys/unix/ext/net/ancillary.rs:376:47
|
376 | let data_len = (*cmsg).cmsg_len - cmsg_len_zero;
| ^^^^^^^^^^^^^ not found in this scope
```
Obviously, this branch:
```rust
cfg_if::cfg_if! {
if #[cfg(any(target_os = "android", all(target_os = "linux", target_env = "gnu")))] {
let cmsg_len_zero = libc::CMSG_LEN(0) as libc::size_t;
} else if #[cfg(any(
target_os = "dragonfly",
target_os = "emscripten",
target_os = "freebsd",
all(target_os = "linux", target_env = "musl",),
target_os = "netbsd",
target_os = "openbsd",
))] {
let cmsg_len_zero = libc::CMSG_LEN(0) as libc::socklen_t;
}
}
```
does not cover the case `all(target_os = "linux", target_env = "uclibc")`.
Mark `-1` as an available niche for file descriptors
Based on discussion from <https://internals.rust-lang.org/t/can-the-standard-library-shrink-option-file/12768>, the file descriptor `-1` is chosen based on the POSIX API designs that use it as a sentinel to report errors. A bigger niche could've been chosen, particularly on Linux, but would not necessarily be portable.
This PR also adds a test case to ensure that the -1 niche (which is kind of hacky and has no obvious test case) works correctly. It requires the "upper" bound, which is actually -1, to be expressed in two's complement.
Fix memory leak in test "mem::uninit_write_slice_cloned_no_drop"
This fixes#80116. I replaced the `Rc` based method I was using with a type that panics when dropped.
Move {f32,f64}::clamp to core.
`clamp` was recently stabilized (tracking issue: https://github.com/rust-lang/rust/issues/44095). But although `Ord::clamp` was added in `core` (because `Ord` is in `core`), the versions for the `f32` and `f64` primitives were added in `std` (together with `floor`, `sin`, etc.), not in `core` (together with `min`, `max`, `from_bits`, etc.).
This change moves them to `core`, such that `clamp` on floats is available in `no_std` programs as well.
Stabilize all stable methods of `Ipv4Addr`, `Ipv6Addr` and `IpAddr` as const
This PR stabilizes all currently stable methods of `Ipv4Addr`, `Ipv6Addr` and `IpAddr` as const.
Tracking issue: #76205
`Ipv4Addr` (`const_ipv4`):
- `octets`
- `is_loopback`
- `is_private`
- `is_link_local`
- `is_multicast`
- `is_broadcast`
- `is_docmentation`
- `to_ipv6_compatible`
- `to_ipv6_mapped`
`Ipv6Addr` (`const_ipv6`):
- `segments`
- `is_unspecified`
- `is_loopback`
- `is_multicast`
- `to_ipv4`
`IpAddr` (`const_ip`):
- `is_unspecified`
- `is_loopback`
- `is_multicast`
## Motivation
The ip methods seem like prime candidates to be made const: their behavior is defined by an external spec, and based solely on the byte contents of an address. These methods have been made unstable const in the beginning of September, after the necessary const integer arithmetic was stabilized.
There is currently a PR open (#78802) to change the internal representation of `IpAddr{4,6}` from `libc` types to a byte array. This does not have any impact on the constness of the methods.
## Implementation
Most of the stabilizations are straightforward, with the exception of `Ipv6Addr::segments`, which uses the unstable feature `const_fn_transmute`. The code could be rewritten to equivalent stable code, but this leads to worse code generation (#75085).
This is why `segments` gets marked with `#[rustc_allow_const_fn_unstable(const_fn_transmute)]`, like the already const-stable `Ipv6Addr::new`, the justification being that a const-stable alternative implementation exists https://github.com/rust-lang/rust/pull/76206#issuecomment-685044184.
## Future posibilities
This PR const-stabilizes all currently stable ip methods, however there are also a number of unstable methods under the `ip` feature (#27709). These methods are already unstable const. There is a PR open (#76098) to stabilize those methods, which could include const-stabilization. However, stabilizing those methods as const is dependent on `Ipv4Addr::octets` and `Ipv6Addr::segments` (covered by this PR).
Add the "async" and "promise" doc aliases to `core::future::Future`
Adds the "async" and "promise" doc aliases to `core::future::Future`. This enables people who search for "async" or "promise" to find `Future`, which is Rust's core primitive for async programming. Thanks!
Stabilize or_insert_with_key
Stabilizes the `or_insert_with_key` feature from https://github.com/rust-lang/rust/issues/71024. This allows inserting key-derived values when a `HashMap`/`BTreeMap` entry is vacant.
The difference between this and `.or_insert_with(|| ... )` is that this provides a reference to the key to the closure after it is moved with `.entry(key_being_moved)`, avoiding the need to copy or clone the key.
Edit formatting in Rust Prelude docs
Use consistent punctuation and capitalization in the list of things re-exported in the prelude.
Also adds a (possibly missing) word.
Fix overflow when converting ZST Vec to VecDeque
```rust
let v = vec![(); 100];
let queue = VecDeque::from(v);
println!("{:?}", queue);
```
This code will currently panic with a capacity overflow.
This PR resolves this issue and makes the code run fine.
Resolves#78532
Integer types have a `count_ones` method that end up calling
`intrinsics::ctpop`.
On some architectures, that intrinsic is translated as a corresponding
CPU instruction know as "popcount" or "popcnt".
This PR makes it so that searching for those names in rustdoc shows those methods.
CC https://blog.rust-lang.org/2020/11/19/Rust-1.48.html#adding-search-aliases
MaybeUninit::copy/clone_from_slice
This PR adds 2 new methods to MaybeUninit under the feature of `maybe_uninit_write_slice`: `copy_from_slice` and `clone_from_slice`.
These are useful for initializing uninitialized buffers (such as the one returned by `Vec::spare_capacity_mut` for example) with initialized data.
The methods behave similarly to the methods on slices, but the destination is uninitialized and they return the destination slice as an initialized slice.
Refactor and fix `parse_prefix` on Windows
This PR is an extension of #78692 as well as a general refactor of `parse_prefix`:
**Fixes**:
There are two errors in the current implementation of `parse_prefix`:
Firstly, in the current implementation only `\` is recognized as a separator character in device namespace prefixes. This behavior is only correct for verbatim paths; `"\\.\C:/foo"` should be parsed as `"C:"` instead of `"C:/foo"`.
Secondly, the current implementation only handles single separator characters. In non-verbatim paths a series of separator characters should be recognized as a single boundary, e.g. the UNC path `"\\localhost\\\\\\C$\foo"` should be parsed as `"\\localhost\\\\\\C$"` and then `UNC(server: "localhost", share: "C$")`, but currently it is not parsed at all, because it starts being parsed as `\\localhost\` and then has an invalid empty share location.
Paths like `"\\.\C:/foo"` and `"\\localhost\\\\\\C$\foo"` are valid on Windows, they are equivalent to just `"C:\foo"`.
**Refactoring**:
All uses of `&[u8]` within `parse_prefix` are extracted to helper functions and`&OsStr` is used instead. This reduces the number of places unsafe is used:
- `get_first_two_components` is adapted to the more general `parse_next_component` and used in more places
- code for parsing drive prefixes is extracted to `parse_drive`
Do not inline finish_grow
Fixes#78471.
Looking at libgkrust.a in Firefox, the sizes for the `gkrust.*.o` file is:
- 18584816 (text) 582418 (data) with unmodified master
- 17937659 (text) 582554 (data) with #72227 reverted
- 17968228 (text) 582858 (data) with `#[inline(never)]` on `grow_amortized` and `grow_exact`, but that has some performance consequences
- 17927760 (text) 582322 (data) with this change
So in terms of size, at least in the case of Firefox, this patch more than undoes the regression. I don't think it should affect performance, but we'll see.
