resolve: further improvements to "try using the enum's variant" diagnostic
Follow-up on https://github.com/rust-lang/rust/pull/77341#issuecomment-702738281.
This PR improves the diagnostic modified in #77341 to suggest not only those variants which do not have fields, but those with fields (by suggesting with placeholders). In addition, the wording of the tuple-variant-only case is improved slightly.
I've not made further changes to the tuple-variant-only case (e.g. to only suggest variants with the correct number of fields) because I don't think I have enough information to do so reliably (e.g. in the case where there is an attempt to construct a tuple variant, I have no information on how many fields were provided; and in the case of pattern matching, I only have a slice of spans and would need to check for things like `..` in those spans, which doesn't seem worth it).
r? @estebank
stabilize union with 'ManuallyDrop' fields and 'impl Drop for Union'
As [discussed by @SimonSapin and @withoutboats](https://github.com/rust-lang/rust/issues/55149#issuecomment-634692020), this PR proposes to stabilize parts of the `untagged_union` feature gate:
* It will be possible to have a union with field type `ManuallyDrop<T>` for any `T`.
* While at it I propose we also stabilize `impl Drop for Union`; to my knowledge, there are no open concerns around this feature.
In the RFC discussion, we also talked about allowing `&mut T` as another non-`Copy` non-dropping type, but that felt to me like an overly specific exception so I figured we'd wait if there is actually any use for such a special case.
Some things remain unstable and still require the `untagged_union` feature gate:
* Union with fields that do not drop, are not `Copy`, and are not `ManuallyDrop<_>`. The reason to not stabilize this is to avoid semver concerns around libraries adding `Drop` implementations later. (This is already not fully semver compatible as, to my knowledge, the borrow checker will exploit the non-dropping nature of any type, but it seems prudent to avoid further increasing the amount of trouble adding an `impl Drop` can cause.)
Due to this, quite a few tests still need the `untagged_union` feature, but I think the ones where I could remove the feature flag provide good test coverage for the stable part.
Cc @rust-lang/lang
Prevent miscompilation in trivial loop {}
Ideally, we would want to handle a broader set of cases to fully fix the
underlying bug here. That is currently relatively expensive at compile and
runtime, so we don't do that for now.
Performance results indicate this is not a major regression, if at all, so it should be safe to land.
cc #28728
Add settings to rustdoc to use the system theme
This PR adds new settings to `rustdoc` to use the operating system color scheme.
`rustdoc` actually had [basic support for this](b1af43bc63/src/librustdoc/html/static/storage.js (L121)), but the setting wasn't visible and couldn't be set back once the theme was explicitly set by the user. It also didn't update if the operating system theme preference changed while viewing a page.
I'm using [this method](https://developer.mozilla.org/en-US/docs/Web/CSS/Media_Queries/Testing_media_queries#Receiving_query_notifications) to query and listen to changes to the `(prefers-color-scheme: dark)` media query. I kept the old method (based on `getComputedStyle`) as a fallback in case the user-agent doesn't support `window.matchMedia` (so like... [pretty much nobody](https://caniuse.com/?search=matchMedia)).
Since there's now more than one official ""dark"" theme in `rustdoc` (and also to support custom/third-party themes), the preferred dark and light themes can be configured in the settings page (the defaults are just "dark" and "light").
This is also my very first "proper" PR to Rust! Please let me know if I did anything wrong :).
Vxworks / Unix deduplication
`sys/vxworks` was almost entirely an (outdated) copy of `sys/unix`. I went through every file to check the differences and tried to figure out if they were simply outdated or intentional differences between `unix` and `vxworks`. Most of them did not have any `vxworks`-specific changes, so are deleted. I've added some minor `cfg(target_os = "vxworks")`-specific things to `sys/unix` to allow for deduplication.
Before this change, the vxworks target didn't compile because its outdated process implementation did not match the expected interface anymore. This also fixes that: `std` compiles again for `x86_64-wrs-vxworks`.
It's probably good to merge `sys/vxworks` entirely into `sys/unix`, but it might be better to to that in a follow-up PR.
`@rustbot` modify labels: +T-libs +C-cleanup
Remove arena's dependency on `rustc_data_structures`
`rustc_arena` currently has a dependency on `rustc_data_structures` because of a trivial "don't inline me" function. This PR copies that function and removes the dependency.
Create a single source scope for promoteds
A promoted inherits all scopes from the parent body. At the same time,
almost all statements and terminators inside the promoted body so far
refer only to one of those scopes: the outermost one.
Instead of inheriting all scopes, inherit only a single scope
corresponding to the location of the promoted, making sure that there
are no references to other scopes.
Rollup of 14 pull requests
Successful merges:
- #75023 (ensure arguments are included in count mismatch span)
- #75265 (Add `str::{Split,RSplit,SplitN,RSplitN,SplitTerminator,RSplitTerminator,SplitInclusive}::as_str` methods)
- #75675 (mangling: mangle impl params w/ v0 scheme)
- #76084 (Refactor io/buffered.rs into submodules)
- #76119 (Stabilize move_ref_pattern)
- #77493 (ICEs should always print the top of the query stack)
- #77619 (Use futex-based thread-parker for Wasm32.)
- #77646 (For backtrace, use StaticMutex instead of a raw sys Mutex.)
- #77648 (Static mutex is static)
- #77657 (Cleanup cloudabi mutexes and condvars)
- #77672 (Simplify doc-cfg rendering based on the current context)
- #77780 (rustc_parse: fix spans on cast and range exprs with attrs)
- #77935 (BTreeMap: make PartialCmp/PartialEq explicit and tested)
- #77980 (Fix intra doc link for needs_drop)
Failed merges:
r? `@ghost`
rustc_parse: fix spans on cast and range exprs with attrs
Currently the span for cast and range expressions does not include the span of attributes associated to the lhs which is causing some issues for us in rustfmt.
```rust
fn foo() -> i64 {
#[attr]
1u64 as i64
}
fn bar() -> Range<i32> {
#[attr]
1..2
}
```
This corrects the span for cast and range expressions to fully include the span of child nodes
Cleanup cloudabi mutexes and condvars
This gets rid of lots of unnecessary unsafety.
All the AtomicU32s were wrapped in UnsafeCell or UnsafeCell<MaybeUninit>, and raw pointers were used to get to the AtomicU32 inside. This change cleans that up by using AtomicU32 directly.
Also replaces a UnsafeCell<u32> by a safer Cell<u32>.
@rustbot modify labels: +C-cleanup
Static mutex is static
StaticMutex is only ever used with as a static (as the name already suggests). So it doesn't have to be generic over a lifetime, but can simply assume 'static.
This 'static lifetime guarantees the object is never moved, so this is no longer a manually checked requirement for unsafe calls to lock().
@rustbot modify labels: +T-libs +A-concurrency +C-cleanup
For backtrace, use StaticMutex instead of a raw sys Mutex.
The code used the very unsafe `sys::mutex::Mutex` directly, and built its own unlock-on-drop wrapper around it. The StaticMutex wrapper already provides that and is easier to use safely.
@rustbot modify labels: +T-libs +C-cleanup
Use futex-based thread-parker for Wasm32.
This uses the existing `sys_common/thread_parker/futex.rs` futex-based thread parker (that was already used for Linux) for wasm32 as well (if the wasm32 atomics target feature is enabled, which is not the case by default).
Wasm32 provides the basic futex operations as instructions: https://webassembly.github.io/threads/syntax/instructions.html
These are now exposed from `sys::futex::{futex_wait, futex_wake}`, just like on Linux. So, `thread_parker/futex.rs` stays completely unmodified.
Stabilize move_ref_pattern
# Implementation
- Initially the rule was added in the run-up to 1.0. The AST-based borrow checker was having difficulty correctly enforcing match expressions that combined ref and move bindings, and so it was decided to simplify forbid the combination out right.
- The move to MIR-based borrow checking made it possible to enforce the rules in a finer-grained level, but we kept the rule in place in an effort to be conservative in our changes.
- In #68376, @Centril lifted the restriction but required a feature-gate.
- This PR removes the feature-gate.
Tracking issue: #68354.
# Description
This PR is to stabilize the feature `move_ref_pattern`, which allows patterns
containing both `by-ref` and `by-move` bindings at the same time.
For example: `Foo(ref x, y)`, where `x` is `by-ref`,
and `y` is `by-move`.
The rules of moving a variable also apply here when moving *part* of a variable,
such as it can't be referenced or moved before.
If this pattern is used, it would result in *partial move*, which means that
part of the variable is moved. The variable that was partially moved from
cannot be used as a whole in this case, only the parts that are still
not moved can be used.
## Documentation
- The reference (rust-lang/reference#881)
- Rust by example (rust-lang/rust-by-example#1377)
## Tests
There are many tests, but I think one of the comperhensive ones:
- [borrowck-move-ref-pattern-pass.rs](85fbf49ce0/src/test/ui/pattern/move-ref-patterns/borrowck-move-ref-pattern-pass.rs)
- [borrowck-move-ref-pattern.rs](85fbf49ce0/src/test/ui/pattern/move-ref-patterns/borrowck-move-ref-pattern.rs)
# Examples
```rust
#[derive(PartialEq, Eq)]
struct Finished {}
#[derive(PartialEq, Eq)]
struct Processing {
status: ProcessStatus,
}
#[derive(PartialEq, Eq)]
enum ProcessStatus {
One,
Two,
Three,
}
#[derive(PartialEq, Eq)]
enum Status {
Finished(Finished),
Processing(Processing),
}
fn check_result(_url: &str) -> Status {
// fetch status from some server
Status::Processing(Processing {
status: ProcessStatus::One,
})
}
fn wait_for_result(url: &str) -> Finished {
let mut previous_status = None;
loop {
match check_result(url) {
Status::Finished(f) => return f,
Status::Processing(p) => {
match (&mut previous_status, p.status) {
(None, status) => previous_status = Some(status), // first status
(Some(previous), status) if *previous == status => {} // no change, ignore
(Some(previous), status) => { // Now it can be used
// new status
*previous = status;
}
}
}
}
}
}
```
Before, we would have used:
```rust
match (&previous_status, p.status) {
(Some(previous), status) if *previous == status => {} // no change, ignore
(_, status) => {
// new status
previous_status = Some(status);
}
}
```
Demonstrating *partial move*
```rust
fn main() {
#[derive(Debug)]
struct Person {
name: String,
age: u8,
}
let person = Person {
name: String::from("Alice"),
age: 20,
};
// `name` is moved out of person, but `age` is referenced
let Person { name, ref age } = person;
println!("The person's age is {}", age);
println!("The person's name is {}", name);
// Error! borrow of partially moved value: `person` partial move occurs
//println!("The person struct is {:?}", person);
// `person` cannot be used but `person.age` can be used as it is not moved
println!("The person's age from person struct is {}", person.age);
}
```
Refactor io/buffered.rs into submodules
This pull request splits `BufWriter`, `BufReader`, `LineWriter`, and `LineWriterShim` (along with their associated tests) into separate submodules. It contains no functional changes. This change is being made in anticipation of adding another type of buffered writer which can be switched between line- and block-buffering mode.
Part of a series of pull requests resolving #60673.
mangling: mangle impl params w/ v0 scheme
This PR modifies v0 symbol mangling to include all generic parameters from impl blocks (not just those used in the self type) - an alternative fix to #75326.
```
original:
_RNCNvXCs4fqI2P2rA04_19impl_param_manglingINtB4_3FooppENtNtNtNtCsfnEnqCNU58Z_4core4iter6traits8iterator8Iterator4next0B4_
// |------------ B4_ ----------------|
// _R (N C (N v (X (C ((s 4fqI2p2rA04_) 19impl_param_mangling)) (I (N t B4_ 3Foo) pp E) (N t (N t (N t (N t (C ((s fnEnqCNU58Z_) 4core)) 4iter) 6traits) 8iterator) 8Iterator)) 4next) 0) B4_
modified:
_RNvXINICs4fqI2P2rA04_11issue_753260pppEINtB5_3FooppENtNtNtNtCsfnEnqCNU58Z_4core4iter6traits8iterator8Iterator4nextB5_
// _R (N v (X (I (N I (C ((s 4fqI2P2rA04_) 11issue_75326)) 0) ppp E) (I (N t B5_ 3Foo) pp E) (N t (N t (N t (N t (C ((s fnEnqCNU58Z_) 4core)) 4iter) 6traits) 8iterator) 8Iterator)) 4next) B5_
// | ^ |
// | | |
// | new impl namespace |
```
~~Submitted as a draft as after some discussion w/ @eddyb, I'm going to do some investigation into (yet more alternative) changes to polymorphization that might remove the necessity for this.~~
r? @eddyb
Add `str::{Split,RSplit,SplitN,RSplitN,SplitTerminator,RSplitTerminator,SplitInclusive}::as_str` methods
tl;dr this allows viewing unyelded part of str-split-iterators, like so:
```rust
let mut split = "Mary had a little lamb".split(' ');
assert_eq!(split.as_str(), "Mary had a little lamb");
split.next();
assert_eq!(split.as_str(), "had a little lamb");
split.by_ref().for_each(drop);
assert_eq!(split.as_str(), "");
```
--------------
This PR adds semi-identical `as_str` methods to most str-split-iterators with signatures like `&'_ Split<'a, P: Pattern<'a>> -> &'a str` (Note: output `&str` lifetime is bound to the `'a`, not the `'_`). The methods are similar to [`Chars::as_str`]
`SplitInclusive::as_str` is under `"str_split_inclusive_as_str"` feature gate, all other methods are under `"str_split_as_str"` feature gate.
Before this PR you had to sum `len`s of all yielded parts or collect into `String` to emulate `as_str`.
[`Chars::as_str`]: https://doc.rust-lang.org/core/str/struct.Chars.html#method.as_str
ensure arguments are included in count mismatch span
The current diagnostic isn't very helpful if the function header spans multiple lines. Lines comprising the function signature may be elided to keep the diagnostic short, but these lines are essential to fixing the error. This is made worse when the function has a body, because the last two lines of the span are then dedicated to showing the end of the body, which is irrelevant.
This PR changes the span to be a multispan made up of the header and the the arguments, ensuring they won't be elided. It also discards the function body from the span.
[Old](https://play.rust-lang.org/?version=stable&mode=debug&edition=2018&gist=f92d9f81a8c9416f0f04e4e09923b6d4):
```
error[E0061]: this function takes 6 arguments but 1 argument was supplied
--> src/main.rs:18:5
|
1 | / fn bar(
2 | | a: i32,
3 | | b: i32,
4 | | c: i32,
... |
14 | | println!("{}", f);
15 | | }
| |_- defined here
...
18 | bar(1);
| ^^^ - supplied 1 argument
| |
| expected 6 arguments
```
New:
```
error[E0061]: this function takes 6 arguments but 1 argument was supplied
--> $DIR/not-enough-arguments.rs:28:3
|
LL | bar(1);
| ^^^ - supplied 1 argument
| |
| expected 6 arguments
|
note: function defined here
--> $DIR/not-enough-arguments.rs:9:1
|
LL | / fn bar(
LL | | a: i32,
| | ^^^^^^^
LL | | b: i32,
| | ^^^^^^^
LL | | c: i32,
| | ^^^^^^^
LL | | d: i32,
| | ^^^^^^^
LL | | e: i32,
| | ^^^^^^^
LL | | f: i32,
| | ^^^^^^^
LL | | ) {
| |_^
```
This commit improves the tuple struct case added in rust-lang/rust#77341
so that the context is mentioned in more of the message.
Signed-off-by: David Wood <david@davidtw.co>
