Then, decouple the question of whether the compiler/stdlib carry
debuginfo (which is controlled via `--enable-debuginfo` and implied by
`--enable-debug`) from the question of whether the tests carry
debuginfo (which now no longer is implied by `--enable-debug` nor
`--enable-debuginfo`, and is off by default).
These commits build on [some great work on reddit](http://www.reddit.com/r/rust/comments/33boew/weekend_experiment_link_rust_programs_against/) for adding MUSL support to the compiler. This goal of this PR is to enable a `--target x86_64-unknown-linux-musl` argument to the compiler to work A-OK. The outcome here is that there are 0 compile-time dependencies for a MUSL-targeting build *except for a linker*. Currently this also assumes that MUSL is being used for statically linked binaries so there is no support for dynamically linked binaries with MUSL.
MUSL support largely just entailed munging around with the linker and where libs are located, and the major highlights are:
* The entirety of `libc.a` is included in `liblibc.rlib` (statically included as an archive).
* The entirety of `libunwind.a` is included in `libstd.rlib` (like with liblibc).
* The target specification for MUSL passes a number of ... flavorful options! Each option is documented in the relevant commit.
* The entire test suite currently passes with MUSL as a target, except for:
* Dynamic linking tests are all ignored as it's not supported with MUSL
* Stack overflow detection is not working MUSL yet (I'm not sure why)
* There is a language change included in this PR to add a `target_env` `#[cfg]` directive. This is used to conditionally build code for only MUSL (or for linux distros not MUSL). I highly suspect that this will also be used by Windows to target MSVC instead of a MinGW-based toolchain.
To build a compiler targeting MUSL you need to follow these steps:
1. Clone the current MUSL repo from `git://git.musl-libc.org/musl`. Build this as usual and install it.
2. Clone and build LLVM's [libcxxabi](http://libcxxabi.llvm.org/) library. Only the `libunwind.a` artifact is needed. I have tried using upstream libunwind's source repo but I have not gotten unwinding to work with it unfortunately. Move `libunwind.a` adjacent to MUSL's `libc.a`
3. Configure a Rust checkout with `--target=x86_64-unknown-linux-musl --musl-root=$MUSL_ROOT` where `MUSL_ROOT` is where you installed MUSL in step 1.
I hope to improve building a copy of libunwind as it's still a little sketchy and difficult to do today, but other than that everything should "just work"! This PR is not intended to include 100% comprehensive support for MUSL, as future modifications will probably be necessary.
This commit adds support to the makefiles, configuration script, and build
system to understand MUSL. This is broken up into a few parts:
* Any target of the form `*-musl` requires the `--musl-root` option to
`./configure` which will indicate the root of the MUSL installation. It is
also expected that there is a libunwind build inside of that installation
built against that MUSL.
* Objects from MUSL are copied into the build tree for Rust to be statically
linked into the appropriate Rust library.
* Objects for binary startup and shutdown are included in each Rust installation
by default for MUSL. This requires MUSL to only be installed on the machine
compiling rust. Only a linker will be necessary for compiling against MUSL on
a target machine.
Eventually a MUSL and/or libunwind build may be integrated by default into the
build but for now they are just always assumed to exist externally.
In most places in mk/tests.mk, it's positioned after rpass-full and
before cfail-full (because rfail comes before cfail). The order of tests
seems a little inconsistent, but reordering everywhere would obscure this
commit.
This commit series starts out with more official test harness support for rustdoc tests, and then each commit afterwards adds a test (where appropriate). Each commit should also test and finish independently of all others (they're all pretty separable).
I've uploaded a [copy of the documentation](http://people.mozilla.org/~acrichton/doc/std/) generated after all these commits were applied, and a double check on issues being closed would be greatly appreciated! I'll also browse the docs a bit and make sure nothing regressed too horribly.
Add a new test directory called 'rustdoc' where all files inside are documented
and run against the `htmldocck` script to have assertions about the output.
Until I can figure out the correct way to configure jemalloc for Bitrig, this patch will correctly disable it. All other build targets remain unchanged.
MacOS X does not ship with Java installed by default. Instead it
includes binary stubs that upon execution pop up a message suggesting
the installation of the JDK.
Since `javac` is only used when `antlr4` is available, it is possible
to work around the popup by only probing for `javac` if `antlr4` has
been successfully detected (in which case the JDK is probably already
installed on the system).
Fixes#23138.
This saves a bunch of a time and will make distributions smaller, as well as
avoiding filling the implementors page with internal garbage. Turn it back on
with `--enable-compiler-docs` if you want them.
(Crates behind the facade are not documented at all)
[breaking-change]
This saves a bunch of a time and will make distributions smaller, as well as
avoiding filling the implementors page with internal garbage. Turn it back on
with `--enable-compiler-docs` if you want compiler docs during development.
Crates behind the facade are only documented on nightly/dev builds (where they
can be used).
[breaking-change]
Closes#23772Closes#21297
LLVM older that 3.6 has a bug that cause assertions when compiling certain
constructs. For 3.5 there's still a chance that the bug might get fixed
in 3.5.2, so let's keep allowing to compile with it for it for now.
Executing `configure` seems to create the following error due to how the script [parses Pandoc's version](https://github.com/rust-lang/rust/blob/master/configure#L705):
```text
./configure: line 705: [: pandoc: integer expression expected
./configure: line 705: [: 1.12.4.2: integer expression expected
```
This issue seems to stem from a discrepancy between BSD and GNU versions of sed. This patch changes the sed command to use an extended regex, which works with both flavours of sed.
the sed option `--in-place` (or `-i`) is a GNU extension, and it is not
portable to BSD system (openbsd and freebsd checked).
use an alternate construction in order to keep the semantic.
When trying to build against a newer, local LLVM version it might be
preferable to have a flag to disable the LLVM version check instead of
having to modify the configure script.
Fixes#21998
the sed option `--in-place` (or `-i`) is a GNU extension, and it is not
portable to BSD system (openbsd and freebsd checked).
use an alternate construction in order to keep the semantic.
This adds a new lexer/parser combo for the entire Rust language can be generated with with flex and bison, taken from my project at https://github.com/bleibig/rust-grammar. There is also a testing script that runs the generated parser with all *.rs files in the repository (except for tests in compile-fail or ones that marked as "ignore-test" or "ignore-lexer-test"). If you have flex and bison installed, you can run these tests using the new "check-grammar" make target.
This does not depend on or interact with the existing testing code in the grammar, which only provides and tests a lexer specification.
OS X users should take note that the version of bison that comes with the Xcode toolchain (2.3) is too old to work with this grammar, they need to download and install version 3.0 or later.
The parser builds up an S-expression-based AST, which can be displayed by giving the "-v" argument to parser-lalr (normally it only gives output on error). It is only a rough approximation of what is parsed and doesn't capture every detail and nuance of the program.
Hopefully this should be sufficient for issue #2234, or at least a good starting point.
There's only one build-critical path in which perl is used, and it was to do a text replacement trivially achievable with sed(1).
I ported the indenter script because it [appears to be used][indenter], but removed check links because it appears to be entirely out of date.
[indenter]: https://github.com/rust-lang/rust/blob/master/src/librustc/util/common.rs#L60-70
This pulls all of our long-form documentation into a single document,
nicknamed "the book" and formally titled "The Rust Programming
Language."
A few things motivated this change:
* People knew of The Guide, but not the individual Guides. This merges
them together, helping discoverability.
* You can get all of Rust's longform documentation in one place, which
is nice.
* We now have rustbook in-tree, which can generate this kind of
documentation. While its style is basic, the general idea is much
better: a table of contents on the left-hand side.
* Rather than a almost 10,000-line guide.md, there are now smaller files
per section.
This partially implements the feature staging described in the
[release channel RFC][rc]. It does not yet fully conform to the RFC as
written, but does accomplish its goals sufficiently for the 1.0 alpha
release.
It has three primary user-visible effects:
* On the nightly channel, use of unstable APIs generates a warning.
* On the beta channel, use of unstable APIs generates a warning.
* On the beta channel, use of feature gates generates a warning.
Code that does not trigger these warnings is considered 'stable',
modulo pre-1.0 bugs.
Disabling the warnings for unstable APIs continues to be done in the
existing (i.e. old) style, via `#[allow(...)]`, not that specified in
the RFC. I deem this marginally acceptable since any code that must do
this is not using the stable dialect of Rust.
Use of feature gates is itself gated with the new 'unstable_features'
lint, on nightly set to 'allow', and on beta 'warn'.
The attribute scheme used here corresponds to an older version of the
RFC, with the `#[staged_api]` crate attribute toggling the staging
behavior of the stability attributes, but the user impact is only
in-tree so I'm not concerned about having to make design changes later
(and I may ultimately prefer the scheme here after all, with the
`#[staged_api]` crate attribute).
Since the Rust codebase itself makes use of unstable features the
compiler and build system to a midly elaborate dance to allow it to
bootstrap while disobeying these lints (which would otherwise be
errors because Rust builds with `-D warnings`).
This patch includes one significant hack that causes a
regression. Because the `format_args!` macro emits calls to unstable
APIs it would trigger the lint. I added a hack to the lint to make it
not trigger, but this in turn causes arguments to `println!` not to be
checked for feature gates. I don't presently understand macro
expansion well enough to fix. This is bug #20661.
Closes#16678
[rc]: https://github.com/rust-lang/rfcs/blob/master/text/0507-release-channels.md
This is a work in progress, but this should get *extensive* review, so I'm putting it up early and often.
This is the start of a draft of the new 'ownership guide,' which explains ownership, borrowing, etc. I'm feeling better about this framing than last time's, but we'll see.
This is a collection of misc issues I've run into while adding bindir & libdir support that aren't really bindir & libdir specific.
While I continue to fiddle with bindir and libdir bugs, I figured these might be useful for others to have merged.
Right now we'll end up globbing them into the accepted targets and (ever worse) they will override the make variables of real target files because we `include`d everything in that directory.
As a side effect, editors get a better hint on file types.
Fixies #11671
This commit changes default relative libdir 'lib' to a relative libdir calculated using LIBDIR provided by --libdir configuration option. In case if no option was provided behavior does not change.
We have a default value for this ('/usr/local'), so this warning is
printed ALL the time unless one does --enable-local-rust. As a result,
it doesn't really help at all.
not in hardcoded libdir path. If there was no LIBDIR provided
during configuration fallback to hardcoded paths.
Thanks to Jan Niklas Hasse for solution and to Alex Crichton for improvements.
Closes#11671
Removes all target-specific knowledge from rustc. Some targets have changed
during this, but none of these should be very visible outside of
cross-compilation. The changes make our targets more consistent.
iX86-unknown-linux-gnu is now only available as i686-unknown-linux-gnu. We
used to accept any value of X greater than 1. i686 was released in 1995, and
should encompass the bare minimum of what Rust supports on x86 CPUs.
The only two windows targets are now i686-pc-windows-gnu and
x86_64-pc-windows-gnu.
The iOS target has been renamed from arm-apple-ios to arm-apple-darwin.
A complete list of the targets we accept now:
arm-apple-darwin
arm-linux-androideabi
arm-unknown-linux-gnueabi
arm-unknown-linux-gnueabihf
i686-apple-darwin
i686-pc-windows-gnu
i686-unknown-freebsd
i686-unknown-linux-gnu
mips-unknown-linux-gnu
mipsel-unknown-linux-gnu
x86_64-apple-darwin
x86_64-unknown-freebsd
x86_64-unknown-linux-gnu
x86_64-pc-windows-gnu
Closes#16093
[breaking-change]
Used aforementioned variants to extract options that have explicit
`putvar` calls associated with them in the subsequent code. When the
explicit `putvar` call was conditional on some potentially complex
condition, moved the `putvar` call out to the main control flow of the
script so that it always runs if necessary.
----
As a driveby fix, captured the error exit when doing the test run of
`rustc --version` from `CFG_LOCAL_RUST_ROOT`, and signal explicit
configure failure when it did not run successfully. (If we cannot run
`rustc`, we really shouldn't try to keep going.)
----
Finally, in response to review feedback, went through and identified
cases where we had been calling `putvar` manually (and thus my naive
translation used `opt_nosave`/`valopt_nosave`), and then verified
whether a manual `putvar` was necessary (i.e., was each variable in
question manually computed somewhere in the `configure` script).
In cases that did not meet this criteria, I revised the code to use
the `opt`/`valopt` directly and removed the corresponding `putvar`,
cleaning things up a teeny bit.
----
Fix#17887.
This commit removes the libuv and gyp submodules, as well as all build
infrastructure related to them.
For more context, see the [runtime removal
RFC](https://github.com/rust-lang/rfcs/pull/230)
[breaking-change]
Adds a new configure flag, --release-channel, which determines how the version
number should be augmented with a release label, as well as how the distribution
artifacts will be named. This is entirely for use by the build automation.
--release-channel can be either 'source', 'nightly', 'beta', or 'stable'.
Here's a summary of the affect of these values on version number and
artifact naming, respectively:
* source - '0.12.0-pre', 'rust-0.12.0-pre-...'
* nightly - '0.12.0-nightly', 'rust-nightly-...'
* beta - '0.12.0-beta', 'rust-beta-...'
* stable - '0.12.0', 'rust-0.12.0-...'
Per http://discuss.rust-lang.org/t/rfc-impending-changes-to-the-release-process/508/1
Not included are two required patches:
* LLVM: segmented stack support for DragonFly [1]
* jemalloc: simple configure patches
[1]: http://reviews.llvm.org/D4705
This commit disables rustc's emission of rpath attributes into dynamic libraries
and executables by default. The functionality is still preserved, but it must
now be manually enabled via a `-C rpath` flag.
This involved a few changes to the local build system:
* --disable-rpath is now the default configure option
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
The major impact of this change is that neither rustdoc nor rustc will work
out-of-the-box in all situations because they are dynamically linked. It must be
arranged to ensure that the libraries of a rust installation are part of the
LD_LIBRARY_PATH. The default installation paths for all platforms ensure this,
but if an installation is in a nonstandard location, then configuration may be
necessary.
Additionally, for all developers of rustc, it will no longer be possible to run
$target/stageN/bin/rustc out-of-the-box. The old behavior can be regained
through the `--enable-rpath` option to the configure script.
This change brings linux/mac installations in line with windows installations
where rpath is not possible.
Closes#11747
[breaking-change]
In line with what @brson, @cmr, @nikomatsakis and I discussed this morning, my
redux of the tutorial will be implemented as the Guide. This way, I can work in
small iterations, rather than dropping a huge PR, which is hard to review. In
addition, the community can observe my work as I'm doing it.
This adds a note in line with [this comment][reddit] that clarifies the state
of the tutorial, and the community's involvement with it.
[reddit]: http://www.reddit.com/r/rust/comments/28bew8/rusts_documentation_is_about_to_drastically/ci9c98k
This commit disables rustc's emission of rpath attributes into dynamic libraries
and executables by default. The functionality is still preserved, but it must
now be manually enabled via a `-C rpath` flag.
This involved a few changes to the local build system:
* --disable-rpath is now the default configure option
* Makefiles now prefer our own LD_LIBRARY_PATH over the user's LD_LIBRARY_PATH
in order to support building rust with rust already installed.
* The compiletest program was taught to correctly pass through the aux dir as a
component of LD_LIBRARY_PATH in more situations.
The major impact of this change is that neither rustdoc nor rustc will work
out-of-the-box in all situations because they are dynamically linked. It must be
arranged to ensure that the libraries of a rust installation are part of the
LD_LIBRARY_PATH. The default installation paths for all platforms ensure this,
but if an installation is in a nonstandard location, then configuration may be
necessary.
Additionally, for all developers of rustc, it will no longer be possible to run
$target/stageN/bin/rustc out-of-the-box. The old behavior can be regained
through the `--enable-rpath` option to the configure script.
This change brings linux/mac installations in line with windows installations
where rpath is not possible.
Closes#11747
[breaking-change]
Rust no longer has support for JIT compilation, so it doesn't currently
require a PaX MPROTECT exception. The extended attributes are preferred
over modifying the binaries so it's not actually going to work on most
systems like this anyway.
If JIT compilation ends up being supported again, it should handle this
by *always* applying the exception via an extended attribute without
performing auto-detection of PaX on the host. The `paxctl` tool is only
necessary with the older method involving modifying the ELF binary.
This adds a new configure option, --jemalloc-root, which will specify a location
at which libjemalloc_pic.a must live. This library is then used for the build
triple as the jemalloc library to link.
This was required to get ./configure to work on my armv7 test machine.
I haven't found anything sane to feature gate `hf` on that's pokable from the context of the configure script.
It also seems that gcc doesn't work on armv7 by default (rust wants to pass it `-m32` which isn't supported), would it be preferential to make the default `--enable-clang` on arm, or remove the `-m32` flag on that platform?
I mostly tried to remain backwards compatible with old invocations of
the `configure` script; if you do not want to use `CC` et al., you
should not have to; you can keep using `--enable-clang` and/or
`--enable-ccache`.
The overall intention is to capture the following precedences for
guessing the C compiler:
1. Value of `CC` at make invocation time.
2. Value of `CC` at configure invocation time.
3. Compiler inferred at configure invocation time (`gcc` or `clang`).
The strategy is to check (at `configure` time) if each of the
environment variables is set, and if so, save its value in a
corresponding `CFG_` variable (e.g. `CFG_CC`).
Then, in the makefiles, if `CC` is not set but `CFG_CC` is, then we
use the `CFG_CC` setting as `CC`.
Also, I fold the potential user-provided `CFLAGS` and `CXXFLAGS`
values into all of the per-platform `CFLAGS` and `CXXFLAGS` settings.
(This was opposed to adding `$(CFLAGS)` in an ad-hoc manner to various
parts of the mk files.)
Fix#13805.
----
Note that if you try to set the compiler to clang via the `CC` and
`CXX` environment variables, you will probably need to also set
`CXXFLAGS` to `--enable-libcpp` so that LLVM will be configured
properly.
----
Introduce CFG_USING_CLANG, which is distinguished from
CFG_ENABLE_CLANG because the former represents "we think we're using
clang, choose appropriate warning-control options" while the latter
represents "we asked configure (or the host required) that we attempt
to use clang, so check that we have an appropriate version of clang."
The main reason I added this is that I wanted to allow the user to
choose clang via setting the `CC` environment variable, but I did not
want that method of selection to get confused with the user passing
the `--enable-clang` option.
----
A digression: The `configure` script does not infer the compiler
setting if `CC` is set; but if `--enable-clang` was passed, then it
*does* still attempt to validate that the clang version is compatible.
Supporting this required revising `CLANG_VERSION` check to be robust
in face of user-provided `CC` value.
In particular, on Travis, the `CC` is set to `gcc` and so the natural
thing to do is to attempt to use `gcc` as the compiler, but Travis is
also passing `--enable-clang` to configure. So, what is the right
answer in the face of these contradictory requests?
One approach would be to have `--enable-clang` supersede the setting
for `CC` (and instead just call whatever we inferred for `CFG_CLANG`).
That sounds maximally inflexible to me (pnkfelix): a developer
requesting a `CC` value probably wants it respected, and should be
able to set it to something else; it is harder for that developer to
hack our configure script to change its inferred path to clang.
A second approach would be to blindly use the `CC` value but keep
going through the clang version check when `--enable-clang` is turned
on. But on Travis (a Linux host), the `gcc` invocation won't print a
clang version, so we would not get past the CLANG_VERSION check in
that context.
A third approach would be to never run the CLANG_VERSION check if `CC`
is explicitly set. That is not a terrible idea; but if the user uses
`CC` to pass in a path to some other version of clang that they want
to test, probably should still send that through the `CLANG_VERSION`
check.
So in the end I (pnkfelix) took a fourth approach: do the
CLANG_VERSION check if `CC` is unset *or* if `CC` is set to a string
ending with `clang`. This way setting `CC` to things like
`path/to/clang` or `ccache clang` will still go through the
CLANG_VERSION check, while setting `CC` to `gcc` or some unknown
compiler will skip the CLANG_VERSION check (regardless of whether the
user passed --enable-clang to `configure`).
----
Drive-by fixes:
* The call that sets `CFG_CLANG_VERSION` was quoting `"$CFG_CC"` in
its invocation, but that does not play nicely with someone who sets
`$CFG_CC` to e.g. `ccache clang`, since you do not want to intepret
that whole string as a command.
(On the other hand, a path with spaces might need the quoted
invocation. Not sure which one of these corner use-cases is more
important to support.)
* Fix chk_cc error message to point user at `gcc` not `cc`.
This adds a `std::rt::heap` module with a nice allocator API. It's a
step towards fixing #13094 and is a starting point for working on a
generic allocator trait.
The revision used for the jemalloc submodule is the stable 3.6.0 release.
Closes#11807
Compile-fail tests for syntax extensions belong in this suite which has correct
dependencies on all artifacts rather than just the target artifacts.
Closes#13818
The goal of the snapshot bots is to produce binaries which can run in as many
locations as possible. Currently we build on Centos 6 for this reason, but with
LLVM's update to C++11, this reduces the number of platforms that we could
possibly run on.
This adds a --enable-llvm-static-stdcpp option to the ./configure script for
Rust which will enable building a librustc with a static dependence on
libstdc++. This normally isn't necessary, but this option can be used on the
snapshot builders in order to continue to make binaries which should be able to
run in as many locations as possible.
OSX often has a more recent version of clang than it does for GCC. When an older
version of gcc is detected on OSX, the --enable-clang flag is implicitly
enabled.
When clang is enabled, also pass through --enable-libcpp to LLVM's configure
command line to help it pick up the most recent c++ runtime library. This also
changes the mklldeps.py script to pick up on whether LLVM was linked against
stdc++ or c++ based on the --cxxflags that llvm-config prints.
In an ongoing attempt to update LLVM, the bots need to update their C compilers
to something that supports c++11 (LLVM recently switched). The OSX bots are
running Lion (10.7), which only supports up to gcc 4.2 and clang 3.2. Apparently
the libstdc++ is too old (even on the most updated command line tools) for LLVM,
but using libc++ instead appears to work just fine.
This comes with a number of fixes to be compatible with upstream LLVM:
* Previously all monomorphizations of "mem::size_of()" would receive the same
symbol. In the past LLVM would silently rename duplicated symbols, but it
appears to now be dropping the duplicate symbols and functions now. The symbol
names of monomorphized functions are now no longer solely based on the type of
the function, but rather the type and the unique hash for the
monomorphization.
* Split stacks are no longer a global feature controlled by a flag in LLVM.
Instead, they are opt-in on a per-function basis through a function attribute.
The rust #[no_split_stack] attribute will disable this, otherwise all
functions have #[split_stack] attached to them.
* The compare and swap instruction now takes two atomic orderings, one for the
successful case and one for the failure case. LLVM internally has an
implementation of calculating the appropriate failure ordering given a
particular success ordering (previously only a success ordering was
specified), and I copied that into the intrinsic translation so the failure
ordering isn't supplied on a source level for now.
* Minor tweaks to LLVM's API in terms of debuginfo, naming, c++11 conventions,
etc.
The previous regex was a bit to strict, rejecting versions such as 3.4.1 which
is apparently the version which travis is currently installing, causing all
travis builds to fail.
MSYS2 supports `MINGW64` system for 64-bit environment. It sets
`MSYSTEM=MINGW64` environment variable, which changes output of
`uname -s` thus affects `configure` behavior.
This patch adds `MINGW64*` support for `configure`.
- remove `node.js` dep., it has no effect as of #12747 (1)
- switch between LaTeX compilers, some cleanups
- CSS: fixup the print stylesheet, refactor highlighting code (2)
(1): `prep.js` outputs its own HTML directives, which `pandoc` cannot recognize when converting the document into LaTeX (this is why the PDF docs have never been highlighted as of now).
Note that if we were to add the `.rust` class to snippets, we could probably use pandoc's native highlighting capatibilities i.e. Kate ([here is](http://adrientetar.github.io/rust-tuts/tutorial/tutorial.pdf) an example of that).
(2): the only real highlighting change is for lifetimes which are now brown instead of red, the rest is just refactor of twos shades of red that look the same.
Also I made numbers highlighting for src in rustdoc a tint more clear so that it is less bothering.
@alexcrichton, @huonw
Closes#9873. Closes#12788.
`prep.js` outputs its own HTML directives, which `pandoc` cannot
recognize when converting the document into LaTeX (this is why the
PDF docs have never been highlighted as of now).
Note that if we were to add the `.rust` class to snippets, we could
probably use pandoc's native highlighting capatibilities i.e. Kate.
By default, the compiler and libraries are all still built with rpaths, but this
can be opted out of with --disable-rpath to ./configure or --no-rpath to rustc.
cc #5219
This reorganizes the documentation index to be more focused on the in-tree docs, and to clean up the style, and it also adds @steveklabnik's pointer guide.
Ensure configure creates doc/guides directory
Fix configure makefile and tests
Remove old guides dir and configure option, convert testing to guide
Remove ignored files
Fix submodule issue
prepend dir in makefile so that bor knows how to build the docs
S to uppercase
llvm supports both win32 native threads and pthread,
but configure tries to find pthread first.
This manually disables pthread to use native api.
This removes libpthreads-2.dll dependency on librustc.
Apple replaced gcc with clang, but kept around a stub gcc to call
clang. This adds a check in `configure` to detect when gcc is
really clang, and switch to using clang in this situation.
Closes#10811.
CFG_BUILD_DIR, CFG_LLVM_SRC_DIR and CFG_SRC_DIR all have trailing
slashes, by definition, so this is correct.
(This is purely cosmetic; the doubled slash is ignored by all the tools we're using.)
This commit implements the support necessary for generating both intermediate
and result static rust libraries. This is an implementation of my thoughts in
https://mail.mozilla.org/pipermail/rust-dev/2013-November/006686.html.
When compiling a library, we still retain the "lib" option, although now there
are "rlib", "staticlib", and "dylib" as options for crate_type (and these are
stackable). The idea of "lib" is to generate the "compiler default" instead of
having too choose (although all are interchangeable). For now I have left the
"complier default" to be a dynamic library for size reasons.
Of the rust libraries, lib{std,extra,rustuv} will bootstrap with an
rlib/dylib pair, but lib{rustc,syntax,rustdoc,rustpkg} will only be built as a
dynamic object. I chose this for size reasons, but also because you're probably
not going to be embedding the rustc compiler anywhere any time soon.
Other than the options outlined above, there are a few defaults/preferences that
are now opinionated in the compiler:
* If both a .dylib and .rlib are found for a rust library, the compiler will
prefer the .rlib variant. This is overridable via the -Z prefer-dynamic option
* If generating a "lib", the compiler will generate a dynamic library. This is
overridable by explicitly saying what flavor you'd like (rlib, staticlib,
dylib).
* If no options are passed to the command line, and no crate_type is found in
the destination crate, then an executable is generated
With this change, you can successfully build a rust program with 0 dynamic
dependencies on rust libraries. There is still a dynamic dependency on
librustrt, but I plan on removing that in a subsequent commit.
This change includes no tests just yet. Our current testing
infrastructure/harnesses aren't very amenable to doing flavorful things with
linking, so I'm planning on adding a new mode of testing which I believe belongs
as a separate commit.
Closes#552
Earlier versions of pandoc don't have the `default.html5` template file. When `make docs` is run, the build process fails with this message.
pandoc: doc/rust.html
pandoc: /usr/share/pandoc-1.8.2.1/templates/default.html5: openFile: does not exist (No such file or directory)
node.js:201
throw e; // process.nextTick error, or 'error' event on first tick
^
Error: write EPIPE
at errnoException (net.js:670:11)
at Object.afterWrite [as oncomplete] (net.js:503:19)
make: *** [doc/rust.html] Error 1
Previously we were actually overwriting `CFG_{HOST,TARGET,BUILD}` with `CFG_{HOST,TARGET,BUILD}_TRIPLE(S)` since configure tested for the legacy one by checking if it was empty which would never be the case. That meant it wouldn't split up multiple triples and just treat it as one long triple.
This pull also fixes the rules that were changed when librustuv was added to use the right CFG_ vars and removes the legacy flags.
As discovered in #9925, it turns out that we weren't using jemalloc on most
platforms. Additionally, on some platforms we were using it incorrectly and
mismatching the libc version of malloc with the jemalloc version of malloc.
Additionally, it's not clear that using jemalloc is indeed a large performance
win in particular situtations. This could be due to building jemalloc
incorrectly, or possibly due to using jemalloc incorrectly, but it is unclear at
this time.
Until jemalloc can be confirmed to integrate correctly on all platforms and has
verifiable large performance wins on platforms as well, it shouldn't be part of
the default build process. It should still be available for use via the
LD_PRELOAD trick on various architectures, but using it as the default allocator
for everything would require guaranteeing that it works in all situtations,
which it currently doesn't.
Closes#9925
