Overhaul const-checking diagnostics
The primary purpose of this PR was to remove `NonConstOp::STOPS_CONST_CHECKING`, which causes any additional errors found by the const-checker to be silenced. I used this flag to preserve diagnostic parity with `qualify_min_const_fn.rs`, which has since been removed.
However, simply removing the flag caused a deluge of errors in some cases, since an error would be emitted any time a local or temporary had a wrong type. To remedy this, I added an alternative system (`DiagnosticImportance`) to silence additional error messages that were likely to distract the user from the underlying issue. When an error of the highest importance occurs, all less important errors are silenced. When no error of the highest importance occurs, all less important errors are emitted after checking is complete. Following the suggestions from the important error is usually enough to fix the less important errors, so this should lead to better UX most of the time.
There's also some unrelated diagnostics improvements in this PR isolated in their own commits. Splitting them out would be possible, but a bit of a pain. This isn't as tidy as some of my other PRs, but it should *only* affect diagnostics, never whether or not something passes const-checking. Note that there are a few trivial exceptions to this, like banning `Yield` in all const-contexts, not just `const fn`.
As always, meant to be reviewed commit-by-commit.
r? `@oli-obk`
Stable hashing: add comments and tests concerning platform-independence
SipHasher128 implements short_write in an endian-independent way, yet
its write_xxx Hasher trait methods undo this endian-independence by byte
swapping the integer inputs on big-endian hardware. StableHasher then
adds endian-independence back by also byte-swapping on big-endian
hardware prior to invoking SipHasher128.
This double swap may have the appearance of being a no-op, but is in
fact by design. In particular, we really do want SipHasher128 to be
platform-dependent, in order to be consistent with the libstd SipHasher.
Try to clarify this intent. Also, add and update a couple of unit tests.
---
Previous commit text:
~SipHasher128: fix platform-independence confusion~
~StableHasher is supposed to ensure platform independence by converting
integers to little-endian and extending isize and usize to 64 bits as
necessary, but in fact, much of that work is already handled by
SipHasher128.~
~In particular, SipHasher128 implements short_write in an
endian-independent way, yet both StableHasher and SipHasher128
additionally attempt to achieve endian-independence by byte swapping on
BE hardware before invoking short writes. This double swap has no
effect, so let's remove it.~
~Because short_write is endian-independent, SipHasher128 is already
handling part of the platform-independence, and it would be somewhat
difficult to make it *not* handle that part with the current
implementation. As splitting platform-independence responsibilities
between StableHasher and SipHasher128 would be confusing, let's make
SipHasher128 handle all of it.~
~Finally, update some incorrect comments and increase test coverage.
Unit tests pass on both LE and BE systems.~
const evaluatable: improve `TooGeneric` handling
Instead of emitting an error in `fulfill`, we now correctly stall on inference variables.
As `const_eval_resolve` returns `ErrorHandled::TooGeneric` when encountering generic parameters on which
we actually do want to error, we check for inference variables and eagerly emit an error if they don't exist, returning `ErrorHandled::Reported` instead.
Also contains a small bugfix for `ConstEquate` where we previously only stalled on type variables. This is probably a leftover from
when we did not yet support stalling on const inference variables.
r? @oli-obk cc @varkor @eddyb
Defer Apple SDKROOT detection to link time.
This defers the detection of the SDKROOT for Apple iOS/tvOS targets to link time, instead of when the `Target` is defined. This allows commands that don't need to link to work (like `rustdoc` or `rustc --print=target-list`). This also makes `--print=target-list` a bit faster.
This also removes the note in the platform support documentation about these targets being missing. When I wrote it, I misunderstood how the SDKROOT stuff worked.
Notes:
* This means that JSON spec targets can't explicitly override these flags. I think that is probably fine, as I believe the value is generally required, and can be set with the SDKROOT environment variable.
* This changes `x86_64-apple-tvos` to use `appletvsimulator`. I think the original code was wrong (it was using `iphonesimulator`). Also, `x86_64-apple-tvos` seems broken in general, and I cannot build it locally. The `data_layout` does not appear to be correct (it is a copy of the arm64 layout instead of the x86_64 layout). I have not tried building Apple's LLVM to see if that helps, but I suspect it is just wrong (I'm uncertain since I don't know how the tvOS simulator works with its bitcode-only requirements).
* I'm tempted to remove the use of `Result` for built-in target definitions, since I don't think they should be fallible. This was added in https://github.com/rust-lang/rust/pull/34980, but that only relates to JSON definitions. I think the built-in targets shouldn't fail. I can do this now, or not.
Fixes#36156Fixes#76584
Fix recursive nonterminal expansion during pretty-print/reparse check
Makes progress towards #43081
In PR #73084, we started recursively expanded nonterminals during the
pretty-print/reparse check, allowing them to be properly compared
against the reparsed tokenstream.
Unfortunately, the recursive logic in that PR only handles the case
where a nonterminal appears inside a `TokenTree::Delimited`. If a
nonterminal appears directly in the expanded tokens of another
nonterminal, the inner nonterminal will not be expanded.
This PR fixes the recursive expansion of nonterminals, ensuring that
they are expanded wherever they occur.
Rollup of 12 pull requests
Successful merges:
- #77037 (more tiny clippy cleanups)
- #77233 (BTreeMap: keep an eye out on the size of the main components)
- #77280 (Ensure that all LLVM components requested by tests are available on CI)
- #77284 (library: Forward compiler-builtins "mem" feature)
- #77296 (liveness: Use Option::None to represent absent live nodes)
- #77322 (Add unstable book docs for `-Zunsound-mir-opts`)
- #77328 (Use `rtassert!` instead of `assert!` from the child process after fork() in std::sys::unix::process::Command::spawn())
- #77331 (Add test for async/await combined with const-generics.)
- #77338 (Fix typo in alloc vec comment)
- #77340 (Alloc vec use imported path)
- #77345 (Add test for issue #74761)
- #77348 (Update books)
Failed merges:
r? `@ghost`
Add support for cmse_nonsecure_entry attribute
This pull request adds the `cmse_nonsecure_entry` attribute under an unstable feature.
I was not sure if it was fine for me to send directly the pull-request or if I should submit a RFC first. I was told on Zulip that it was fine to do so but please close it if I need first submit a RFC or follow another process instead.
The `cmse_nonsecure_entry` attribute is a LLVM attribute that will be available in LLVM 11. I plan to rebase on the [upgrade PR](https://github.com/rust-lang/rust/pull/73526) once merged to make this one compile.
This attribute modifies code generation of the function as explained [here](https://developer.arm.com/documentation/ecm0359818/latest/) to make it work with the TrustZone-M hardware feature. This feature is only available on `thumbv8m` targets so I created an error for that if one tries to use this attribute for another target.
I added this attribute in Rust as any other LLVM attribute are added but since this one is target-dependent I am not sure if it was the best thing to do. Please indicate me if you think of other ways, like isolating target-dependent attributes together.
----------------
Tracking issue: https://github.com/rust-lang/rust/issues/75835
This patch adds support for the LLVM cmse_nonsecure_entry attribute.
This is a target-dependent attribute that only has sense for the
thumbv8m Rust targets.
You can find more information about this attribute here:
https://developer.arm.com/documentation/ecm0359818/latest/
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Secure entry functions do not support if arguments are passed on the
stack. An "unsupported" diagnostic will be emitted by LLVM if that is
the case.
This commits adds support in Rust for that diagnostic so that an error
will be output if that is the case!
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
SipHasher128 implements short_write in an endian-independent way, yet
its write_xxx Hasher trait methods undo this endian-independence by byte
swapping the integer inputs on big-endian hardware. StableHasher then
adds endian-independence back by also byte-swapping on big-endian
hardware prior to invoking SipHasher128.
This double swap may have the appearance of being a no-op, but is in
fact by design. In particular, we really do want SipHasher128 to be
platform-dependent, in order to be consistent with the libstd SipHasher.
Try to clarify this intent. Also, add and update a couple of unit tests.
This helper function was meant to reduce code duplication between
const-checking pre- and post-drop-elaboration. Most of the functionality
is only relevant for the pre-drop-elaboration pass.
Liveness refactoring continued
* Move body_owner field from IrMaps to Liveness (the only user of the field).
* Use upvars instead of FnKind to check for closures (avoids FnKind, will be useful when checking all bodies, not just fns).
* Use visit_param to add variables corresponding to params.
* Store upvars_mentioned inside Liveness struct.
* Inline visitor implementation for IrMaps, avoiding unnecessary indirection.
* Test interaction with automatically_derived attribute (not covered by any of existing tests).
No functional changes intended.
expand: Stop normalizing `NtIdent`s before passing them to built-in macros
Built-in macros should be able to deal with `NtIdents` in the input by themselves like any other parser code.
You can't imagine how bad mutable AST visitors are, *especially* if they are modifying tokens.
This is one step towards removing token visiting from the visitor infrastructure (https://github.com/rust-lang/rust/pull/77271 also works in this direction.)
