Move auxiliary directories to live with the tests
This is a step for enabling testing of cross-crate incremental compilation. The idea is that instead of having a central auxiliary directory, when you have a `// aux-build:foo.rs` annotation in the test `run-pass/bar.rs`, it will look in (e.g.) `run-pass/aux/foo.rs`. In general, it looks for an `aux` directory in the same directory as the test. We also ignore the `aux` directories when enumerating the set of tests.
As part of this PR, also refactor `runtest.rs` to use methods on a context, which means we can stop passing around context everywhere.
r? @alexcrichton
Looks like the real bug on nightlies is that the `llvm-pass` run-make test is
not actually getting the value of `LLVM_CXXFLAGS` correct. Namely, it's blank!
Now the only change #33093 which actually affected this is that the argument
`$(LLVM_CXXFLAGS_$(2))` was moved up from a makefile rule into the definition of
a variable. Sounds innocuous?
Turns out the variable this was moved into is defined with `:=`, which means
that it's not recursively expanded, which basically means that it's expanded
immediately. Unfortunately part of this expansion involves running
`llvm-config`, which doesn't exist at the start of distcheck build!
This didn't show up on the bots because they run `make` *then* `make check`, and
the first step builds llvm-config so the next time `make` is loaded everything
is available. The distcheck bots, however, run just a plain `distcheck` so
`make` doesn't exist ahead of time. You can see this in action where the
distcheck bots start out with a bunch of "llvm-config not found" error messages.
This commit just changes a few variables to be defined with `=` which
essentially means they're lazily expanded. I did not run a full distcheck
locally, but this makes the initial "llvm-config not found" error messages go
away so I suspect that this is the fix.
Closes#33379
We will no longer use `ccache` in the makefiles for our local dependencies like
miniz, but they're so small anyway it doesn't really matter.
Closes#33285
If the `-f` option isn't given, GNU tar will use environment variable
`TAPE` first, and next use the compiled-in default, which isn't
necessary `stdout` (it is the tape device `/dev/rst0` under OpenBSD for
example).
This changes the CFLAGS and related variables passed to compiletest to be passed
for the target, not the host, so we can correctly test 32-bit cross compiles on
64-bit host machines.
Hopefuly fixes#33379
test: Move run-make tests into compiletest
Forcing them to be embedded in makefiles precludes being able to run them in
rustbuild, and adding them to compiletest gives us a great way to leverage
future enhancements to our "all encompassing test suite runner" as well as just
moving more things into Rust.
All tests are still Makefile-based in the sense that they rely on `make` being
available to run them, but there's no longer any Makefile-trickery to run them
and rustbuild can now run them out of the box as well.
Forcing them to be embedded in makefiles precludes being able to run them in
rustbuild, and adding them to compiletest gives us a great way to leverage
future enhancements to our "all encompassing test suite runner" as well as just
moving more things into Rust.
All tests are still Makefile-based in the sense that they rely on `make` being
available to run them, but there's no longer any Makefile-trickery to run them
and rustbuild can now run them out of the box as well.
The `--android-cross-path` has been deprecated for some time now, we should use
`CFG_ARM_LINUX_ANDROIDEABI_NDK` instead.
Ideally this would use the right triple, but we're only testing ARM for now.
Sanity check Python on OSX for LLDB tests
Two primary changes:
* Don't get past the configure stage if `python` isn't coming from `/usr/bin`
* Call `debugger.Terminate()` to prevent segfaults on newer versions of LLDB.
Closes#32994
This uncovered a lot of bugs in compiletest and also some shortcomings
of our existing JSON output. We had to add information to the JSON
output, such as suggested text and macro backtraces. We also had to fix
various bugs in the existing tests.
Joint work with jntrnr.
Compute `target_feature` from LLVM
This is a work-in-progress fix for #31662.
The logic that computes the target features from the command line has been replaced with queries to the `TargetMachine`.
This commit removes all infrastructure from the repository for our so-called
snapshots to instead bootstrap the compiler from stable releases. Bootstrapping
from a previously stable release is a long-desired feature of distros because
they're not fans of downloading binary stage0 blobs from us. Additionally, this
makes our own CI easier as we can decommission all of the snapshot builders and
start having a regular cadence to when we update the stage0 compiler.
A new `src/etc/get-stage0.py` script was added which shares some code with
`src/bootstrap/bootstrap.py` to read a new file, `src/stage0.txt`, which lists
the current stage0 compiler as well as cargo that we bootstrap from. This script
will download the relevant `rustc` package an unpack it into `$target/stage0` as
we do today.
One problem of bootstrapping from stable releases is that we're not able to
compile unstable code (e.g. all the `#![feature]` directives in libcore/libstd).
To overcome this we employ two strategies:
* The bootstrap key of the previous compiler is hardcoded into `src/stage0.txt`
(enabled as a result of #32731) and exported by the build system. This enables
nightly features in the compiler we download.
* The standard library and compiler are pinned to a specific stage0, which
doesn't change, so we're guaranteed that we'll continue compiling as we start
from a known fixed source.
The process for making a release will also need to be tweaked now to continue to
cadence of bootstrapping from the previous release. This process looks like:
1. Merge `beta` to `stable`
2. Produce a new stable compiler.
3. Change `master` to bootstrap from this new stable compiler.
4. Merge `master` to `beta`
5. Produce a new beta compiler
6. Change `master` to bootstrap from this new beta compiler.
Step 3 above should involve very few changes as `master` was previously
bootstrapping from `beta` which is the same as `stable` at that point in time.
Step 6, however, is where we benefit from removing lots of `#[cfg(stage0)]` and
get to use new features. This also shouldn't slow the release too much as steps
1-5 requires little work other than waiting and step 6 just needs to happen at
some point during a release cycle, it's not time sensitive.
Closes#29555Closes#29557
This commit adds support in rustbuild for running all of the compiletest test
suites as part of `make check`. The `compiletest` program was moved to
`src/tools` (like `rustbook` and others) and is now just compiled like any other
old tool. Each test suite has a pretty standard set of dependencies and just
tweaks various parameters to the final compiletest executable.
Note that full support is lacking in terms of:
* Once a test suite has passed, that's not remembered. When a test suite is
requested to be run, it's always run.
* The arguments to compiletest probably don't work for every possible
combination of platforms and testing environments just yet. There will likely
need to be future updates to tweak various pieces here and there.
* Cross compiled test suites probably don't work just yet, support for that will
come in a follow-up patch.
This verifies that the crates listed in the `[dependencies]` section of
`Cargo.toml` are a subset of the crates listed in `lib.rs` for our in-tree
crates. This should help ensure that when we refactor crates over time we keep
these dependency lists in sync.
This commit rewrites all of the tidy checks we have, namely:
* featureck
* errorck
* tidy
* binaries
into Rust under a new `tidy` tool inside of the `src/tools` directory. This at
the same time deletes all the corresponding Python tidy checks so we can be sure
to only have one source of truth for all the tidy checks.
cc #31590
mk: Hardcode the bootstrap key for each release
Starting with the 1.10.0 release we would like to bootstrap all compilers from
the previous stable release. For example the 1.10.0 compiler should bootstrap
from the literal 1.9.0 release artifacts. To do this, however, we need a way to
enable unstable features temporarily in a stable compiler (as the released
compiler is stable), but it turns out we already have a way to do that!
At compile time the configure script selects a `CFG_BOOTSTRAP_KEY` variable
value and then exports it into the makefiles. If the `RUSTC_BOOTSTRAP_KEY`
environment variable is set to this value, then the compiler is allowed to
"cheat" and use unstable features.
This method of choosing the bootstrap key, however, is problematic for the
intention of bootstrapping from the previous release. Each time a 1.9.0 compiler
is created, a new bootstrap key will be selected. That means that the 1.10.0
compiler will only compile from *our* literal release artifacts. Instead
distributions would like to bootstrap from their own compilers, so instead we
simply hardcode the bootstrap key for each release.
This patch uses the same `CFG_FILENAME_EXTRA` value (a hash of the release
string) as the bootstrap key. Consequently all 1.9.0 compilers, no matter where
they are compiled, will have the same bootstrap key. Additionally we won't need
to keep updating this as it'll be based on the release number anyway.
Once the 1.9.0 beta has been created, we can update the 1.10.0 nightly sources
(the `master` branch at that time) to bootstrap from that release using this
hard-coded bootstrap key. We will likely just hardcode into the makefiles what
the previous bootstrap key was and we'll change that whenever the stage0
compiler is updated.
Starting with the 1.10.0 release we would like to bootstrap all compilers from
the previous stable release. For example the 1.10.0 compiler should bootstrap
from the literal 1.9.0 release artifacts. To do this, however, we need a way to
enable unstable features temporarily in a stable compiler (as the released
compiler is stable), but it turns out we already have a way to do that!
At compile time the configure script selects a `CFG_BOOTSTRAP_KEY` variable
value and then exports it into the makefiles. If the `RUSTC_BOOTSTRAP_KEY`
environment variable is set to this value, then the compiler is allowed to
"cheat" and use unstable features.
This method of choosing the bootstrap key, however, is problematic for the
intention of bootstrapping from the previous release. Each time a 1.9.0 compiler
is created, a new bootstrap key will be selected. That means that the 1.10.0
compiler will only compile from *our* literal release artifacts. Instead
distributions would like to bootstrap from their own compilers, so instead we
simply hardcode the bootstrap key for each release.
This patch uses the same `CFG_FILENAME_EXTRA` value (a hash of the release
string) as the bootstrap key. Consequently all 1.9.0 compilers, no matter where
they are compiled, will have the same bootstrap key. Additionally we won't need
to keep updating this as it'll be based on the release number anyway.
Once the 1.9.0 beta has been created, we can update the 1.10.0 nightly sources
(the `master` branch at that time) to bootstrap from that release using this
hard-coded bootstrap key. We will likely just hardcode into the makefiles what
the previous bootstrap key was and we'll change that whenever the stage0
compiler is updated.
Our `codegen` test suite requires the LLVM `FileCheck` utility but unfortunately
this isn't always available in all custom LLVM roots (e.g. those specified via
`--llvm-root`). This commit adds a `./configure` option called
`--disable-codegen-tests` which will manually disable running these tests. In
the case that this option is passed we can forgo the need for the `FileCheck`
executable. Note that we still require `FileCheck` by default as we will attempt
to run these tests.
Closes#28667
mk: A few build fixes for i586-pc-windows-msvc
Detect the triple in the configure script for probing MSVC shenanigans and also
be sure to use `llvm-config` from the build host and not the target when
configuring compiler-rt.
mk: Fix cross-host builds
The change in b20e748 had the unintended consequence of breaking cross-host
builds as we apparently relied on the incorrect definition of this variable in
the makefiles. That change, however, was required to get tests passing so we
couldn't just revert it.
This commit fixes the underlying bug by leaving the "more correct" definition of
`LD_LIBRARY_PATH_ENV_TARGETDIR` (also fixing it with a hardcoded reference to
`CFG_BUILD`) and updating the `RPATH_VAR` definition below. Turned out we
already had special-casing logic for passing `--cfg stage1` during the
well-we-print-this-as-stage0 build of a cross-host. That logic was just updated
to pull from a different variable as opposed to relying on the definition of
that variable to accommodate this.
Closes#32568
Detect the triple in the configure script for probing MSVC shenanigans and also
be sure to use `llvm-config` from the build host and not the target when
configuring compiler-rt.
The change in b20e748 had the unintended consequence of breaking cross-host
builds as we apparently relied on the incorrect definition of this variable in
the makefiles. That change, however, was required to get tests passing so we
couldn't just revert it.
This commit fixes the underlying bug by leaving the "more correct" definition of
`LD_LIBRARY_PATH_ENV_TARGETDIR` (also fixing it with a hardcoded reference to
`CFG_BUILD`) and updating the `RPATH_VAR` definition below. Turned out we
already had special-casing logic for passing `--cfg stage1` during the
well-we-print-this-as-stage0 build of a cross-host. That logic was just updated
to pull from a different variable as opposed to relying on the definition of
that variable to accommodate this.
Closes#32568
This should re-enable all external builds of crates with the same name. Right
now Cargo doesn't pass `-C metadata` for the top-level library being compiled,
so if that library is called `libc`, for example, then it won't be able to link
to the standard library which *also* has a `libc` library compiled without `-C
metadata`. This can result in naming conflicts which need to be resolved.
By passing `-C metadata` to the in-tree crates we ship it should add some extra
salt to all symbol names to ensure that they don't collide.
emit (via debug!) scary message from `fn borrowck_mir` until basic
prototype is in place.
Gather children of move paths and set their kill bits in
dataflow. (Each node has a link to the child that is first among its
siblings.)
Hooked in libgraphviz based rendering, including of borrowck dataflow
state.
doing this well required some refactoring of the code, so I cleaned it
up more generally (adding comments to explain what its trying to do
and how it is doing it).
Update: this newer version addresses most review comments (at least
the ones that were largely mechanical changes), but I left the more
interesting revisions to separate followup commits (in this same PR).
typestrong const integers
~~It would be great if someone could run crater on this PR, as this has a high danger of breaking valid code~~ Crater ran. Good to go.
----
So this PR does a few things:
1. ~~const eval array values when const evaluating an array expression~~
2. ~~const eval repeat value when const evaluating a repeat expression~~
3. ~~const eval all struct and tuple fields when evaluating a struct/tuple expression~~
4. remove the `ConstVal::Int` and `ConstVal::Uint` variants and replace them with a single enum (`ConstInt`) which has variants for all integral types
* `usize`/`isize` are also enums with variants for 32 and 64 bit. At creation and various usage steps there are assertions in place checking if the target bitwidth matches with the chosen enum variant
5. enum discriminants (`ty::Disr`) are now `ConstInt`
6. trans has its own `Disr` type now (newtype around `u64`)
This obviously can't be done without breaking changes (the ones that are noticable in stable)
We could probably write lints that find those situations and error on it for a cycle or two. But then again, those situations are rare and really bugs imo anyway:
```rust
let v10 = 10 as i8;
let v4 = 4 as isize;
assert_eq!(v10 << v4 as usize, 160 as i8);
```
stops compiling because 160 is not a valid i8
```rust
struct S<T, S> {
a: T,
b: u8,
c: S
}
let s = S { a: 0xff_ff_ff_ffu32, b: 1, c: 0xaa_aa_aa_aa as i32 };
```
stops compiling because `0xaa_aa_aa_aa` is not a valid i32
----
cc @eddyb @pnkfelix
related: https://github.com/rust-lang/rfcs/issues/1071
Add a link validator to rustbuild
This commit was originally targeted at just adding a link checking script to the rustbuild system. This ended up snowballing a bit to extend rustbuild to be amenable to various tools we have as part of the build system in general.
There's a new `src/tools` directory which has a number of scripts/programs that are purely intended to be used as part of the build system and CI of this repository. This is currently inhabited by rustbook, the error index generator, and a new linkchecker script added as part of this PR. I suspect that more tools like compiletest, tidy scripts, snapshot scripts, etc will migrate their way into this directory over time.
The commit which adds the error index generator shows the steps necessary to add new tools to the build system, namely:
1. New steps are defined for building the tool and running the tool
2. The dependencies are configured
3. The steps are implemented
In terms of the link checker, these commits do a few things:
* A new `src/tools/linkchecker` script is added. This will read an entire documentation tree looking for broken relative links (HTTP links aren't followed yet).
* A large number of broken links throughout the documentation were fixed. Many of these were just broken when viewed from core as opposed to std, but were easily fixed.
* A few rustdoc bugs here and there were fixed
rustc: Add an i586-pc-windows-msvc target
Similarly to #31629 where an i586-unknown-linux-gnu target was added, there is
sometimes a desire to compile for x86 Windows as well where SSE2 is disabled.
This commit mirrors the i586-unknown-linux-gnu target and simply adds a variant
for Windows as well.
This is motivated by a recent [Gecko bug][ff] where crashes were seen on 32-bit
Windows due to users having CPUs that don't support SSE2 instructions. It was
requested that we could have non-SSE2 builds of the standard library available
so they could continue to use vanilla releases and nightlies.
[ff]: https://bugzilla.mozilla.org/show_bug.cgi?id=1253202
mk: Distribute fewer TARGET_CRATES
Right now everything in TARGET_CRATES is built by default for all non-fulldeps
tests and is distributed by default for all target standard library packages.
Currenly this includes a number of unstable crates which are rarely used such as
`graphviz` and `rbml`>
This commit trims down the set of `TARGET_CRATES`, moves a number of tests to
`*-fulldeps` as a result, and trims down the dependencies of libtest so we can
distribute fewer crates in the `rust-std` packages.
Right now everything in TARGET_CRATES is built by default for all non-fulldeps
tests and is distributed by default for all target standard library packages.
Currenly this includes a number of unstable crates which are rarely used such as
`graphviz` and `rbml`>
This commit trims down the set of `TARGET_CRATES`, moves a number of tests to
`*-fulldeps` as a result, and trims down the dependencies of libtest so we can
distribute fewer crates in the `rust-std` packages.
Adding -Wno-error is more reliable and simple than trying to modify existing
flags. We've been using this in Debian already for the past few releases.
Making this change also encourages future maintainers towards "best practises".
Also take the opportunity to use the same method at all places in the file.
Adding -Wno-error is more reliable and simple than trying to modify existing
flags. We've been using this in Debian already for the past few releases.
Making this change also encourages future maintainers towards "best practises".
Also take the opportunity to use the same method at all places in the file.
Similarly to #31629 where an i586-unknown-linux-gnu target was added, there is
sometimes a desire to compile for x86 Windows as well where SSE2 is disabled.
This commit mirrors the i586-unknown-linux-gnu target and simply adds a variant
for Windows as well.
This is motivated by a recent [Gecko bug][ff] where crashes were seen on 32-bit
Windows due to users having CPUs that don't support SSE2 instructions. It was
requested that we could have non-SSE2 builds of the standard library available
so they could continue to use vanilla releases and nightlies.
[ff]: https://bugzilla.mozilla.org/show_bug.cgi?id=1253202
The `--disable-jemalloc` configure option has a failure mode where it will
create a distribution that is not compatible with other compilers. For example
the nightly for Linux will assume that it will link to jemalloc by default as
an allocator for executable crates. If, however, a standard library is used
which was built via `./configure --disable-jemalloc` then this will fail
because the jemalloc crate wasn't built.
While this seems somewhat reasonable as a niche situation, the same mechanism is
used for disabling jemalloc for platforms that just don't support it. For
example if the rumprun target is compiled then the sibiling Linux target *also*
doesn't have jemalloc. This is currently a problem for our cross-build nightlies
which build many targets. If rumprun is also built, it will disable jemalloc for
all targets, which isn't desired.
This commit moves the platform-specific disabling of jemalloc as hardcoded logic
into the makefiles that is scoped per-platform. This way when configuring
multiple targets **without the `--disable-jemalloc` option specified** all
targets will get jemalloc as they should.
The `--disable-jemalloc` configure option has a failure mode where it will
create a distribution that is not compatible with other compilers. For example
the nightly for Linux will assume that it will link to jemalloc by default as
an allocator for executable crates. If, however, a standard library is used
which was built via `./configure --disable-jemalloc` then this will fail
because the jemalloc crate wasn't built.
While this seems somewhat reasonable as a niche situation, the same mechanism is
used for disabling jemalloc for platforms that just don't support it. For
example if the rumprun target is compiled then the sibiling Linux target *also*
doesn't have jemalloc. This is currently a problem for our cross-build nightlies
which build many targets. If rumprun is also built, it will disable jemalloc for
all targets, which isn't desired.
This commit moves the platform-specific disabling of jemalloc as hardcoded logic
into the makefiles that is scoped per-platform. This way when configuring
multiple targets **without the `--disable-jemalloc` option specified** all
targets will get jemalloc as they should.
You can now group tests into directories like `run-pass/borrowck` or `compile-fail/borrowck`. By default, all `.rs` files within any directory are considered tests: to ignore some directory, create a placeholder file called `compiletest-ignore-dir` (I had to do this for several existing directories).
r? @alexcrichton
cc @brson
Right now the compiler's we're using actually default to armv7/thumb2 I believe,
so this should help push them back to what the arm-unknown-linux-* targets are
for. This at least matches that clang does for the `arm-unknown-linux-gnueabihf`
target which is to map it to an armv6 architecture.
Closes#31787
Right now the compiler's we're using actually default to armv7/thumb2 I believe,
so this should help push them back to what the arm-unknown-linux-* targets are
for. This at least matches that clang does for the `arm-unknown-linux-gnueabihf`
target which is to map it to an armv6 architecture.
Closes#31787
use CXX value found at configure time inside run-make tests.
it permits OpenBSD to pass llvm-module-pass test (which use CXX
variable).
r? @alexcrichton
This is because the tool compiler passes the name of the tool
as a command line `--cfg`. The improved session config parser
is stricter and no longer permits invalid meta items (such as
"error-index-generator").
Now that we properly only link in jemalloc when building executables, we have
far less to worry about in terms of polluting the global namespace with the
`free` and `malloc` symbols on Linux. This commit will primarily allow LLVM to
use jemalloc so the compiler will only be using one allocator overall.
Locally this took compile time for libsyntax from 95 seconds to 89 (a 6%
improvement).
r? @brson
cc @alexcrichton
I still need to add error code explanation test with this, but I can't figure out a way to generate the `.md` files in order to test example source codes.
Will fix#27328.
When building with Cargo we need to detect `feature = "jemalloc"` to enable
jemalloc, so propagate this same change to the build system to pass the right
`--cfg` argument.
Backtraces, and the compilation of libbacktrace for asmjs, are disabled.
This port doesn't use jemalloc so, like pnacl, it disables jemalloc *for all targets*
in the configure file.
It disables stack protection.
Without this patch, `compiler-rt` fails to build when the `CFLAGS` environment variable contains a `-Werror=*` flag (for example `-Werror=format-security`).
The build system was removing only the `-Werror` part from the flag, thus passing an unrecognized `=*` (for example `=format-security`) argument to gcc.
This pull request adds support for [Illumos](http://illumos.org/)-based operating systems: SmartOS, OpenIndiana, and others. For now it's x86-64 only, as I'm not sure if 32-bit installations are widespread. This PR is based on #28589 by @potatosalad, and also closes#21000, #25845, and #25846.
Required changes in libc are already merged: https://github.com/rust-lang-nursery/libc/pull/138
Here's a snapshot required to build a stage0 compiler:
https://s3-eu-west-1.amazonaws.com/nbaksalyar/rustc-sunos-snapshot.tar.gz
It passes all checks from `make check`.
There are some changes I'm not quite sure about, e.g. macro usage in `src/libstd/num/f64.rs` and `DirEntry` structure in `src/libstd/sys/unix/fs.rs`, so any comments on how to rewrite it better would be greatly appreciated.
Also, LLVM configure script might need to be patched to build it successfully, or a pre-built libLLVM should be used. Some details can be found here: https://llvm.org/bugs/show_bug.cgi?id=25409
Thanks!
r? @brson
Currently any compilation to MIPS spits out the warning:
'generic' is not a recognized processor for this target (ignoring processor)
Doesn't make for a great user experience! We don't encounter this in the normal
bootstrap because the cpu/feature set are set by the makefiles. Instead let's
just propagate these to the defaults for the entire target all the time (still
overridable from the command line) and prevent warnings from being emitted by
default.
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
r? @alexcrichton
I don't believe these test cases have served any purpose in years.
The shootout benchmarks are now upstreamed. A new benchmark suite
should rather be maintained out of tree.
r? @nikomatsakis
Currently any compilation to MIPS spits out the warning:
'generic' is not a recognized processor for this target (ignoring processor)
Doesn't make for a great user experience! We don't encounter this in the normal
bootstrap because the cpu/feature set are set by the makefiles. Instead let's
just propagate these to the defaults for the entire target all the time (still
overridable from the command line) and prevent warnings from being emitted by
default.
These commits perform a few high-level changes with the goal of enabling i686 MSVC unwinding:
* LLVM is upgraded to pick up the new exception handling instructions and intrinsics for MSVC. This puts us somewhere along the 3.8 branch, but we should still be compatible with LLVM 3.7 for non-MSVC targets.
* All unwinding for MSVC targets (both 32 and 64-bit) are implemented in terms of this new LLVM support. I would like to also extend this to Windows GNU targets to drop the runtime dependencies we have on MinGW, but I'd like to land this first.
* Some tests were fixed up for i686 MSVC here and there where necessary. The full test suite should be passing now for that target.
In terms of landing this I plan to have this go through first, then verify that i686 MSVC works, then I'll enable `make check` on the bots for that target instead of just `make` as-is today.
Closes#25869
This target covers MIPS devices that run the trunk version of OpenWRT.
The x86_64-unknown-linux-musl target always links statically to C libraries. For
the mips(el)-unknown-linux-musl target, we opt for dynamic linking (like most of
other targets do) to keep binary size down.
As for the C compiler flags used in the build system, we use the same flags used
for the mips(el)-unknown-linux-gnu target.
I don't believe these test cases have served any purpose in years.
The shootout benchmarks are now upstreamed. A new benchmark suite
should rather be maintained out of tree.
The cross prefix was not likely the actual compiler that needed to be used, but
rather the standard `arm-linux-gnueabihf-gcc` compiler can just be used with
`-march=armv7`.
Unfortunately older clang compilers don't support this argument, so the
bootstrap will fail. We don't actually really need to optimized the C code we
compile, however, as currently we're just compiling jemalloc and not much else.
This adds support for the armv7 crosstool-ng toolchain for the Raspberry Pi 2.
Getting the toolchain ready:
Checkout crosstool-ng from https://github.com/crosstool-ng/crosstool-ng
Build crosstool-ng
Configure the rpi2 target with |ct-ng armv7-rpi2-linux-gnueabihf|
Build the toolchain with |ct-build| and add the path to $toolchain_install_dir/bin to your $PATH
Then, on the rust side:
configure --target=armv7-rpi2-linux-gnueabihf && make && make install
To cross compile for the rpi2,
add $rust_install_path/lib to your $LD_LIBRARY_PATH, then use
rustc --target=armv7-rpi2-linux-gnueabihf -C linker=armv7-rpi2-linux-gnueabihf-g++ hello.rs
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
r? @nikomatsakis
cc @rust-lang/compiler
Translation Item Collection
===========================
This module is responsible for discovering all items that will contribute to
to code generation of the crate. The important part here is that it not only
needs to find syntax-level items (functions, structs, etc) but also all
their monomorphized instantiations. Every non-generic, non-const function
maps to one LLVM artifact. Every generic function can produce
from zero to N artifacts, depending on the sets of type arguments it
is instantiated with.
This also applies to generic items from other crates: A generic definition
in crate X might produce monomorphizations that are compiled into crate Y.
We also have to collect these here.
The following kinds of "translation items" are handled here:
- Functions
- Methods
- Closures
- Statics
- Drop glue
The following things also result in LLVM artifacts, but are not collected
here, since we instantiate them locally on demand when needed in a given
codegen unit:
- Constants
- Vtables
- Object Shims
General Algorithm
-----------------
Let's define some terms first:
- A "translation item" is something that results in a function or global in
the LLVM IR of a codegen unit. Translation items do not stand on their
own, they can reference other translation items. For example, if function
`foo()` calls function `bar()` then the translation item for `foo()`
references the translation item for function `bar()`. In general, the
definition for translation item A referencing a translation item B is that
the LLVM artifact produced for A references the LLVM artifact produced
for B.
- Translation items and the references between them for a directed graph,
where the translation items are the nodes and references form the edges.
Let's call this graph the "translation item graph".
- The translation item graph for a program contains all translation items
that are needed in order to produce the complete LLVM IR of the program.
The purpose of the algorithm implemented in this module is to build the
translation item graph for the current crate. It runs in two phases:
1. Discover the roots of the graph by traversing the HIR of the crate.
2. Starting from the roots, find neighboring nodes by inspecting the MIR
representation of the item corresponding to a given node, until no more
new nodes are found.
The roots of the translation item graph correspond to the non-generic
syntactic items in the source code. We find them by walking the HIR of the
crate, and whenever we hit upon a function, method, or static item, we
create a translation item consisting of the items DefId and, since we only
consider non-generic items, an empty type-substitution set.
Given a translation item node, we can discover neighbors by inspecting its
MIR. We walk the MIR and any time we hit upon something that signifies a
reference to another translation item, we have found a neighbor. Since the
translation item we are currently at is always monomorphic, we also know the
concrete type arguments of its neighbors, and so all neighbors again will be
monomorphic. The specific forms a reference to a neighboring node can take
in MIR are quite diverse. Here is an overview:
The most obvious form of one translation item referencing another is a
function or method call (represented by a CALL terminator in MIR). But
calls are not the only thing that might introduce a reference between two
function translation items, and as we will see below, they are just a
specialized of the form described next, and consequently will don't get any
special treatment in the algorithm.
A function does not need to actually be called in order to be a neighbor of
another function. It suffices to just take a reference in order to introduce
an edge. Consider the following example:
```rust
fn print_val<T: Display>(x: T) {
println!("{}", x);
}
fn call_fn(f: &Fn(i32), x: i32) {
f(x);
}
fn main() {
let print_i32 = print_val::<i32>;
call_fn(&print_i32, 0);
}
```
The MIR of none of these functions will contain an explicit call to
`print_val::<i32>`. Nonetheless, in order to translate this program, we need
an instance of this function. Thus, whenever we encounter a function or
method in operand position, we treat it as a neighbor of the current
translation item. Calls are just a special case of that.
In a way, closures are a simple case. Since every closure object needs to be
constructed somewhere, we can reliably discover them by observing
`RValue::Aggregate` expressions with `AggregateKind::Closure`. This is also
true for closures inlined from other crates.
Drop glue translation items are introduced by MIR drop-statements. The
generated translation item will again have drop-glue item neighbors if the
type to be dropped contains nested values that also need to be dropped. It
might also have a function item neighbor for the explicit `Drop::drop`
implementation of its type.
A subtle way of introducing neighbor edges is by casting to a trait object.
Since the resulting fat-pointer contains a reference to a vtable, we need to
instantiate all object-save methods of the trait, as we need to store
pointers to these functions even if they never get called anywhere. This can
be seen as a special case of taking a function reference.
Since `Box` expression have special compiler support, no explicit calls to
`exchange_malloc()` and `exchange_free()` may show up in MIR, even if the
compiler will generate them. We have to observe `Rvalue::Box` expressions
and Box-typed drop-statements for that purpose.
Interaction with Cross-Crate Inlining
-------------------------------------
The binary of a crate will not only contain machine code for the items
defined in the source code of that crate. It will also contain monomorphic
instantiations of any extern generic functions and of functions marked with
The collection algorithm handles this more or less transparently. When
constructing a neighbor node for an item, the algorithm will always call
`inline::get_local_instance()` before proceeding. If no local instance can
be acquired (e.g. for a function that is just linked to) no node is created;
which is exactly what we want, since no machine code should be generated in
the current crate for such an item. On the other hand, if we can
successfully inline the function, we subsequently can just treat it like a
local item, walking it's MIR et cetera.
Eager and Lazy Collection Mode
------------------------------
Translation item collection can be performed in one of two modes:
- Lazy mode means that items will only be instantiated when actually
referenced. The goal is to produce the least amount of machine code
possible.
- Eager mode is meant to be used in conjunction with incremental compilation
where a stable set of translation items is more important than a minimal
one. Thus, eager mode will instantiate drop-glue for every drop-able type
in the crate, even of no drop call for that type exists (yet). It will
also instantiate default implementations of trait methods, something that
otherwise is only done on demand.
Open Issues
-----------
Some things are not yet fully implemented in the current version of this
module.
Since no MIR is constructed yet for initializer expressions of constants and
statics we cannot inspect these properly.
Ideally, no translation item should be generated for const fns unless there
is a call to them that cannot be evaluated at compile time. At the moment
this is not implemented however: a translation item will be produced
regardless of whether it is actually needed or not.
<!-- Reviewable:start -->
[<img src="https://reviewable.io/review_button.png" height=40 alt="Review on Reviewable"/>](https://reviewable.io/reviews/rust-lang/rust/30900)
<!-- Reviewable:end -->
Unfortunately older clang compilers don't support this argument, so the
bootstrap will fail. We don't actually really need to optimized the C code we
compile, however, as currently we're just compiling jemalloc and not much else.
The purpose of the translation item collector is to find all monomorphic instances of functions, methods and statics that need to be translated into LLVM IR in order to compile the current crate.
So far these instances have been discovered lazily during the trans path. For incremental compilation we want to know the set of these instances in advance, and that is what the trans::collect module provides.
In the future, incremental and regular translation will be driven by the collector implemented here.
This commit removes the `-D warnings` flag being passed through the makefiles to
all crates to instead be a crate attribute. We want these attributes always
applied for all our standard builds, and this is more amenable to Cargo-based
builds as well.
Note that all `deny(warnings)` attributes are gated with a `cfg(stage0)`
attribute currently to match the same semantics we have today
this makes sure the checks run before typeck (which might use the constant or const
function to calculate an array length) and gives prettier error messages in case of for
loops and such (since they aren't expanded yet).
fixes#30887
r? @pnkfelix
This aligns with unicode recommendations and should be stable for all future
unicode releases. See http://unicode.org/reports/tr31/#R3.
This renames `libsyntax::lexer::is_whitespace` to `is_pattern_whitespace`
so potentially breaks users of libsyntax.
this makes sure the checks run before typeck (which might use the constant or const
function to calculate an array length) and gives prettier error messages in case of for
loops and such (since they aren't expanded yet).
Use arena allocation instead of reference counting for `Module`s to fix memory leaks from `Rc` cycles.
A module references its module children and its import resolutions, and an import resolution references the module defining the imported name, so there is a cycle whenever a module imports something from an ancestor module.
For example,
```rust
mod foo { // `foo` references `bar`.
fn baz() {}
mod bar { // `bar` references the import.
use foo::baz; // The import references `foo`.
}
}
```
I also re-enabled the use of `#[thread_local]` on AArch64. It was originally disabled in the PR that introduced AArch64 (#19790), but the reasons for this were not explained. `#[thread_local]` seems to work fine in my tests on AArch64, so I don't think this should be an issue.
cc @alexcrichton @akiss77
This mixes in additional information into the hash that is
passed to -C extra-filename. It can be used to further distinguish
the standard libraries if they must be installed next to each
other.
Closes#29559
Frankly, I'm not sure if this solves a real problem. It's meant to help with side-by-side and overlapping installations where there are two sets of libs in /usr, but there are other potential issues there as well, including that some of our artifacts don't use this extra-filename munging, and it's not something our installers can support at all.
cc @jauhien Do you still think this helps the Gentoo case?
Since `darwin` is really `apple-darwin`, the valgrind-rpass tests were not actually being run with valgrind on mac before. Also, the `HOST` check was completely wrong.
r? @alexcrichton
This mixes in additional information into the hash that is
passed to -C extra-filename. It can be used to further distinguish
the standard libraries if they must be installed next to each
other.
Closes#29559
It's been awhile since we last updated jemalloc, and there's likely some bugs
that have been fixed since the last version we're using, so let's try to update
again.
It's been awhile since we last updated jemalloc, and there's likely some bugs
that have been fixed since the last version we're using, so let's try to update
again.
this PR reverts previous ones, that tried to make `cc` to found `estdc++` in `/usr/local/lib`. It causes more trouble than it resolvs things: rustc become unbuildable if another version already exists in `/usr/local` (for example, `libstd-xxxx.so` is found in `/usr/local/lib` and in builddir).
so this PR tries another way to achieve build, but using the good linker for building. By default, rustc use `cc` for linking. But under OpenBSD, `cc` is gcc 4.2.1 from base, whereas we build with gcc 4.9 from ports. By linking using the compiler found at compile-time, we ensure that the compiler will found his own stdc++ library without trouble.
r? @alexcrichton
By default, rustc use `cc` as linker. Under OpenBSD, `cc` is gcc version 4.2.1.
So use the compiler found at configure-time for linking: it will be gcc 4.9.
It permits to resolv problem of finding -lestdc++ or -lgcc. For base gcc (4.2), there are in not standard path, whereas for ports gcc (4.9) there are in standard path.
It looks like #27937 accidentally switched the llvmdeps file from the target to
the host by accident, so be sure to use the right llvmdeps file which is built
for the target when building rustc_llvm
This handles cases when the LLVM used isn't configured will the 'usual' targets. Also, cases where LLVM is shared are also handled (ie with `LD_LIBRARY_PATH` etc).
This handles cases when the LLVM used isn't configured will the 'usual'
targets. Also, cases where LLVM is shared are also handled (ie with
`LD_LIBRARY_PATH` etc).
With this commit, metadata encoding and decoding can make use of thread-local encoding and decoding contexts. These allow implementers of `serialize::Encodable` and `Decodable` to access information and
datastructures that would otherwise not be available to them. For example, we can automatically translate def-id and span information during decoding because the decoding context knows which crate the data is decoded from. Or it allows to make `ty::Ty` decodable because the context has access to the `ty::ctxt` that is needed for creating `ty::Ty` instances.
Some notes:
- `tls::with_encoding_context()` and `tls::with_decoding_context()` (as opposed to their unsafe versions) try to prevent the TLS data getting out-of-sync by making sure that the encoder/decoder passed in is actually the same as the one stored in the context. This should prevent accidentally reading from the wrong decoder.
- There are no real tests in this PR. I had a unit tests for some of the core aspects of the TLS implementation but it was kind of brittle, a lot of code for mocking `ty::ctxt`, `crate_metadata`, etc and did actually test not so much. The code will soon be tested by the first incremental compilation auto-tests that rely on MIR being properly serialized. However, if people think that some tests should be added before this can land, I'll try to provide some that make sense.
r? @nikomatsakis
With this commit, metadata encoding and decoding can make use of
thread-local encoding and decoding contexts. These allow implementers
of serialize::Encodable and Decodable to access information and
datastructures that would otherwise not be available to them. For
example, we can automatically translate def-id and span information
during decoding because the decoding context knows which crate the
data is decoded from. Or it allows to make ty::Ty decodable because
the context has access to the ty::ctxt that is needed for creating
ty::Ty instances.
The `rsbegin.o` and `rsend.o` build products should not be generated
on non WinGnu platforms.
This is another path to resolving #30063 for non win-gnu targets.
(And it won't require a snapshot, unlike PR #30208.)
r? @alexcrichton
The `rsbegin.o` and `rsend.o` build products should not be generated
on non WinGnu platforms.
This is another path to resolving #30063 for non win-gnu targets.
(And it won't require a snapshot, unlike PR #30208.)
In #29932, I moved the location of TRPL, but I missed making the changes
in mk/tests.mk. This led to #30088 landing with a broken example.
As such, #30113 will need to land before this.
Previously the file was not regenrated upon modification of `src/rustllvm` or others.
Now it will be rebuilt if `src/llvm` or `src/rustllvm` is touched.
Also added *.rs rule to 'clean' rule so that it is removed upon 'make
clean'.
Fixes#28614.
Debian wants to build all binaries with particular hardening flags.
The Rust makefiles are inconsistent in which architectures they
correctly include CFLAGS/etc from the enivoronment (see mk/cfg/*).
This patch adds LDFLAGS, and then unconditionally prepends
CFLAGS/LDFLAGS/etc to the build commands.
The book was located under 'src/doc/trpl' because originally, it was
going to be hosted under that URL. Late in the game, before 1.0, we
decided that /book was a better one, so we changed the output, but
not the input. This causes confusion for no good reason. So we'll change
the source directory to look like the output directory, like for every
other thing in src/doc.
Rather than modifying the installer to disable directory rewriting,
this patch modifies the directory structure passed to the installer so
that the rewriting gives the correct results. This means that if a
non-standard --libdir is passed to configure then the same --libdir
option (relative to the --prefix) must be passed to the install
script. In the `make install` case this is handled automatically.
Binary distributions are generally generated using the default
--libdir and then have paths optionally rewritten by the installer,
which should continue to work.
This has the advantage of not complicating the installer interface
intended for end-user use.
Fixes#29561
On distros that use i486 or i586 in their CHOST, Rust will fail to build
because it is not handling i486 or i586 like i686 is handled. This
changes the match to do work for all instances of i?86 instead of just
i686. The Yocto Project still uses i586 as a target.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
under openbsd, the library path of libstdc++ need to be explicit (due
to the fact the default linker `cc` is gcc-4.2, and not gcc-4.9).
but when a recent LLVM is installed, rustc compilation pikes the bad
LLVM version (which live in /usr/local/lib, which is same directory of
libestdc++.so for gcc-4.9).
this patch move the libstdc++ path from RUST_FLAGS_<target> to special
variable, and use it *after* LLVM_LIBDIR_RUSTFLAGS_<target> in
arguments.
r? @alexcrichton
Rather than modifying the installer to disable directory rewriting,
this patch modifies the directory structure passed to the installer so
that the rewriting gives the correct results. This means that if a
non-standard --libdir is passed to configure then the same --libdir
option (relative to the --prefix) must be passed to the install
script. In the `make install` case this is handled automatically.
Binary distributions are generally generated using the default
--libdir and then have paths optionally rewritten by the installer,
which should continue to work.
This has the advantage of not complicating the installer interface
intended for end-user use.
Fixes#29561
On distros that use i486 or i586 in their CHOST, Rust will fail to build
because it is not handling i486 or i586 like i686 is handled. This
changes the match to do work for all instances of i?86 instead of just
i686. The Yocto Project still uses i586 as a target.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
I noticed the nomicon was not listed!
I also removed links to racer and rustfmt since they were not *doc-specific* links, just links to tools, as well as pointed the cargo link directly at the docs.
Removed all the community stuff. There are lots of other places to find this now, including the website.
With pending website changes this page will continue to be pared back, reflecting only what's in-tree, not general Rust docs.
r? @steveklabnik
This should get `--libdir` working as well as it was a couple of weeks ago. (That is, it still rewrites paths incorrectly but it no longer fails during `make install`.)
Fixesgentoo/gentoo-rust#28 and gentoo/gentoo-rust#29.
This is to handle the case where CFG_LIBDIR is not a direct child of
CFG_PREFIX (in other words, where CFG_LIBDIR_RELATIVE has more than
one component).
Emacs warns that makefile lines that start with spaces followed by
tabs are "suspicious". These were harmless since they were
continuation lines, but getting rid of the warning is nice and this
version looks better.
The important one is $(MAKE). make handles recipes containing the
literal string "$(MAKE)" specially, so it is important to make sure it
isn't evaluated until recipe invocation time.
under openbsd, the library path of libstdc++ need to be explicit (due
to the fact the default linker `cc` is gcc-4.2, and not gcc-4.9).
but when a recent LLVM is installed, rustc compilation pikes the bad
LLVM version (which live in /usr/local/lib, which is same directory of
libestdc++.so for gcc-4.9).
this patch move the libstdc++ path from RUST_FLAGS_<target> to special
variable, and use it *after* LLVM_LIBDIR_RUSTFLAGS_<target> in
arguments.
Quite a bit of cruft in the valgrind suppressions. I started from a clean slate and found a few unique failures; this commit also moves the tests "fixed" by these suppressions into run-pass-valgrind.
* Delete `sys::unix::{c, sync}` as these are now all folded into libc itself
* Update all references to use `libc` as a result.
* Update all references to the new flat namespace.
* Moves all windows bindings into sys::c
