mirror of https://github.com/MonkWho/pfatt.git
update to 2.4.4
This commit is contained in:
parent
d6379e6910
commit
97bb39fe08
|
@ -63,7 +63,7 @@ But enough talk. Now for the fun part!
|
|||
* At least __three__ physical network interfaces on your pfSense server
|
||||
* The MAC address of your Residential Gateway
|
||||
* Local or console access to pfSense
|
||||
* pfSense 2.4.3 _(confirmed working, other versions should work but YMMV)_
|
||||
* pfSense 2.4.4 _(confirmed working in 2.4.3 too, other versions should work but YMMV)_
|
||||
|
||||
If you only have two NICs, you can buy this cheap USB 100Mbps NIC [from Amazon](https://amzn.to/2P0yn8k) as your third. It has the Asix AX88772 chipset, which is supported in FreeBSD with the [axe](https://www.freebsd.org/cgi/man.cgi?query=axe&sektion=4) driver. I've confirmed it works in my setup. The driver was already loaded and I didn't have to install or configure anything to get it working. Also, don't worry about the poor performance of USB or 100Mbps NICs. This third NIC will only send/recieve a few packets periodicaly to authenticate your Router Gateway. The rest of your traffic will utilize your other (and much faster) NICs.
|
||||
|
||||
|
@ -77,10 +77,10 @@ If you only have two NICs, you can buy this cheap USB 100Mbps NIC [from Amazon](
|
|||
ssh root@pfsense chmod 555 /boot/kernel/ng_etf.ko
|
||||
```
|
||||
|
||||
b) Or you, a responsible sysadmin, can compile the module yourself from another, trusted FreeBSD machine. _You cannot build packages directly on pfSense._ Your FreeBSD version should match that of your pfSense version. (Example: pfSense 2.4.3 = FreeBSD 11.1)
|
||||
b) Or you, a responsible sysadmin, can compile the module yourself from another, trusted FreeBSD machine. _You cannot build packages directly on pfSense._ Your FreeBSD version should match that of your pfSense version. (Example: pfSense 2.4.4 = FreeBSD 11.2)
|
||||
```
|
||||
# from a FreeBSD machine (not pfSense!)
|
||||
fetch ftp://ftp.freebsd.org/pub/FreeBSD/releases/amd64/amd64/11.1-RELEASE/src.txz
|
||||
fetch ftp://ftp.freebsd.org/pub/FreeBSD/releases/amd64/amd64/11.2-RELEASE/src.txz
|
||||
tar -C / -zxvf src.txz
|
||||
cd /usr/src/sys/modules/netgraph
|
||||
make
|
||||
|
@ -118,7 +118,7 @@ If everything is setup correctly, netgraph should be bridging EAP traffic betwee
|
|||
|
||||
Once your netgraph setup is in place and working, there aren't any netgraph changes required to the setup to get IPv6 working. These instructions can also be followed with a different bypass method other than the netgraph method. Big thanks to @pyrodex1980's [post](http://www.dslreports.com/forum/r32118263-) on DSLReports for sharing your notes.
|
||||
|
||||
This setup assumes you have a fairly recent version of pfSense. I'm using 2.4.3.
|
||||
This setup assumes you have a fairly recent version of pfSense. I'm using 2.4.4.
|
||||
|
||||
**DUID Setup**
|
||||
|
||||
|
|
Loading…
Reference in New Issue