binutils-gdb/bfd/elf32-msp430.c

2633 lines
80 KiB
C
Raw Normal View History

2002-12-30 20:25:13 +01:00
/* MSP430-specific support for 32-bit ELF
Copyright (C) 2002-2015 Free Software Foundation, Inc.
2002-12-30 20:25:13 +01:00
Contributed by Dmitry Diky <diwil@mail.ru>
This file is part of BFD, the Binary File Descriptor library.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
2002-12-30 20:25:13 +01:00
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston,
MA 02110-1301, USA. */
2002-12-30 20:25:13 +01:00
#include "sysdep.h"
#include "bfd.h"
2002-12-30 20:25:13 +01:00
#include "libiberty.h"
#include "libbfd.h"
#include "elf-bfd.h"
#include "elf/msp430.h"
static bfd_reloc_status_type
rl78_sym_diff_handler (bfd * abfd,
arelent * reloc,
asymbol * sym ATTRIBUTE_UNUSED,
void * addr ATTRIBUTE_UNUSED,
asection * input_sec,
bfd * out_bfd ATTRIBUTE_UNUSED,
char ** error_message ATTRIBUTE_UNUSED)
{
bfd_size_type octets;
octets = reloc->address * bfd_octets_per_byte (abfd);
/* Catch the case where bfd_install_relocation would return
bfd_reloc_outofrange because the SYM_DIFF reloc is being used in a very
small section. It does not actually matter if this happens because all
that SYM_DIFF does is compute a (4-byte) value. A second reloc then uses
this value, and it is that reloc that must fit into the section.
This happens in eg, gcc/testsuite/gcc.c-torture/compile/labels-3.c. */
if ((octets + bfd_get_reloc_size (reloc->howto))
> bfd_get_section_limit_octets (abfd, input_sec))
return bfd_reloc_ok;
return bfd_reloc_continue;
}
2002-12-30 20:25:13 +01:00
static reloc_howto_type elf_msp430_howto_table[] =
{
HOWTO (R_MSP430_NONE, /* type */
0, /* rightshift */
Fallout from recent bfd_reloc_outofrange changes Commit ec93045b and cd21f5da introduced a large number of tic4x and tic54x regressions, due to the new checks being wrong for targets with octets_per_byte != 1. To fix that I introduced a new bfd_get_section_limit_octets and performed the check on octets rather than byte adresses, reducing the number of bfd_octets_per_byte calls. bfd_octets_per_byte is rather expensive.. I then wondered why the same bfd_reloc_outofrange check added to bfd_perform_relocation wasn't also added to bfd_install_relocation. The two functions are virtually identical and ought to remain that way. However, adding the same check to bfd_install_relocation resulted in ld-elf "FAIL Link eh-group.o to eh-group" on many ELF targets, including x64_64-linux. The reason being that eh-group.o has NONE relocs at the end of a section, and most targets give NONE relocs a non-zero size. So if we are to keep the new outofrange check it appears that NONE relocs must have a zero size. * bfd-in.h (bfd_get_section_limit_octets): New define, extracted from.. (bfd_get_section_limit): ..here. * reloc.c (bfd_perform_relocation): Correct bfd_reloc_outofrange check. (bfd_install_relocation, _bfd_final_link_relocate): Add same check here. * elf32-sh.c (sh_elf_reloc): Correct bfd_reloc_outofrange check. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Remove duplicated bfd_reloc_outofrange check. * bfd-in2.h: Regenerate. * cpu-ns32k.c (_bfd_do_ns32k_reloc_contents): Return bfd_reloc_ok on zero size relocs. * ecoff.c (ecoff_reloc_link_order): Likewise. * elf32-nds32.c (nds32_relocate_contents): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. * reloc.c (_bfd_relocate_contents): Don't bomb on zero size relocs. (_bfd_clear_contents): Likewise. * elfxx-mips.c (mips_elf_obtain_contents): Likewise. (mips_elf_perform_relocation): Likewise. * aoutx.h (aout_link_reloc_link_order): Allow for NULL return from malloc on zero size alloc. * cofflink.c (_bfd_coff_reloc_link_order): Likewise. * elflink.c (elf_reloc_link_order): Likewise. * linker.c (_bfd_generic_reloc_link_order): Likewise. * pdp11.c (aout_link_reloc_link_order): Likewise. * xcofflink.c (xcoff_reloc_link_order): Likewise. * aoutx.h (howto_table_ext): Ensure NONE relocs have size 3, bitsize 0, and complain_overflow_dont. * coff-sparc.c (coff_sparc_howto_table): Likewise. * elf-hppa.h (elf_hppa_howto_table): Likewise. * elf-m10200.c (elf_mn10200_howto_table): Likewise. * elf-m10300.c (elf_mn10300_howto_table): Likewise. * elf32-arc.c (elf_arc_howto_table): Likewise. * elf32-arm.c (elf32_arm_howto_table_1): Likewise. * elf32-avr.c (elf_avr_howto_table): Likewise. * elf32-bfin.c (bfin_howto_table): Likewise. * elf32-cr16.c (cr16_elf_howto_table): Likewise. * elf32-cris.c (cris_elf_howto_table): Likewise. * elf32-crx.c (crx_elf_howto_table): Likewise. * elf32-d10v.c (elf_d10v_howto_table): Likewise. * elf32-d30v.c (elf_d30v_howto_table): Likewise. * elf32-dlx.c (dlx_elf_howto_table): Likewise. * elf32-epiphany.c (epiphany_elf_howto_table): Likewise. * elf32-fr30.c (fr30_elf_howto_table): Likewise. * elf32-frv.c (elf32_frv_howto_table): Likewise. * elf32-h8300.c (h8_elf_howto_table): Likewise. * elf32-i370.c (i370_elf_howto_raw): Likewise. * elf32-i386.c (elf_howto_table): Likewise. * elf32-i860.c (elf32_i860_howto_table): Likewise. * elf32-i960.c (elf32_i960_relocate): Likewise. * elf32-ip2k.c (ip2k_elf_howto_table): Likewise. * elf32-iq2000.c (iq2000_elf_howto_table): Likewise. * elf32-lm32.c (lm32_elf_howto_table): Likewise. * elf32-m32c.c (m32c_elf_howto_table): Likewise. * elf32-m32r.c (m32r_elf_howto_table): Likewise. * elf32-m68hc11.c (elf_m68hc11_howto_table): Likewise. * elf32-m68hc12.c (elf_m68hc11_howto_table): Likewise. * elf32-m68k.c (howto_table): Likewise. * elf32-mcore.c (mcore_elf_howto_raw): Likewise. * elf32-mep.c (mep_elf_howto_table): Likewise. * elf32-metag.c (elf_metag_howto_table): Likewise. * elf32-microblaze.c (microblaze_elf_howto_raw): Likewise. * elf32-mips.c (elf_mips_howto_table_rel): Likewise. * elf32-moxie.c (moxie_elf_howto_table): Likewise. * elf32-msp430.c (elf_msp430_howto_table): Likewise. * elf32-mt.c (mt_elf_howto_table): Likewise. * elf32-nds32.c (nds32_elf_howto_table): Likewise. * elf32-nios2.c (elf_nios2_howto_table_rel): Likewise. * elf32-or1k.c (or1k_elf_howto_table): Likewise. * elf32-pj.c (pj_elf_howto_table): Likewise. * elf32-ppc.c (ppc_elf_howto_raw): Likewise. * elf32-rl78.c (rl78_elf_howto_table): Likewise. * elf32-rx.c (rx_elf_howto_table): Likewise. * elf32-s390.c (elf_howto_table): Likewise. * elf32-score.c (elf32_score_howto_table): Likewise. * elf32-score7.c (elf32_score_howto_table): Likewise. * elf32-sh-relocs.h (R_SH_NONE): Likewise. * elf32-spu.c (elf_howto_table): Likewise. * elf32-tic6x.c (elf32_tic6x_howto_table): Likewise. * elf32-tilepro.c (tilepro_elf_howto_table): Likewise. * elf32-v850.c (v850_elf_howto_table): Likewise. * elf32-vax.c (howto_table): Likewise. * elf32-visium.c (visium_elf_howto_table): Likewise. * elf32-xc16x.c (xc16x_elf_howto_table): Likewise. * elf32-xgate.c (elf_xgate_howto_table): Likewise. * elf32-xstormy16.c (xstormy16_elf_howto_table): Likewise. * elf32-xtensa.c (elf_howto_table): Likewise. * elf64-alpha.c (elf64_alpha_howto_table): Likewise. * elf64-mips.c (mips_elf64_howto_table_rel): Likewise. * elf64-mmix.c (elf_mmix_howto_table): Likewise. * elf64-ppc.c (ppc64_elf_howto_raw): Likewise. * elf64-s390.c (elf_howto_table): Likewise. * elf64-sh64.c (sh_elf64_howto_table): Likewise. * elf64-x86-64.c (x86_64_elf_howto_table): Likewise. * elfn32-mips.c (elf_mips_howto_table_rel): Likewise. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Likewise. (elfNN_aarch64_howto_none): Likewise. * elfxx-ia64.c (ia64_howto_table): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_howto_table): Likewise. * elfxx-tilegx.c (tilegx_elf_howto_table): Likewise. * nlm32-sparc.c (nlm32_sparc_howto_table): Likewise.
2015-01-19 01:06:26 +01:00
3, /* size (0 = byte, 1 = short, 2 = long) */
0, /* bitsize */
2002-12-30 20:25:13 +01:00
FALSE, /* pc_relative */
0, /* bitpos */
Fallout from recent bfd_reloc_outofrange changes Commit ec93045b and cd21f5da introduced a large number of tic4x and tic54x regressions, due to the new checks being wrong for targets with octets_per_byte != 1. To fix that I introduced a new bfd_get_section_limit_octets and performed the check on octets rather than byte adresses, reducing the number of bfd_octets_per_byte calls. bfd_octets_per_byte is rather expensive.. I then wondered why the same bfd_reloc_outofrange check added to bfd_perform_relocation wasn't also added to bfd_install_relocation. The two functions are virtually identical and ought to remain that way. However, adding the same check to bfd_install_relocation resulted in ld-elf "FAIL Link eh-group.o to eh-group" on many ELF targets, including x64_64-linux. The reason being that eh-group.o has NONE relocs at the end of a section, and most targets give NONE relocs a non-zero size. So if we are to keep the new outofrange check it appears that NONE relocs must have a zero size. * bfd-in.h (bfd_get_section_limit_octets): New define, extracted from.. (bfd_get_section_limit): ..here. * reloc.c (bfd_perform_relocation): Correct bfd_reloc_outofrange check. (bfd_install_relocation, _bfd_final_link_relocate): Add same check here. * elf32-sh.c (sh_elf_reloc): Correct bfd_reloc_outofrange check. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Remove duplicated bfd_reloc_outofrange check. * bfd-in2.h: Regenerate. * cpu-ns32k.c (_bfd_do_ns32k_reloc_contents): Return bfd_reloc_ok on zero size relocs. * ecoff.c (ecoff_reloc_link_order): Likewise. * elf32-nds32.c (nds32_relocate_contents): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. * reloc.c (_bfd_relocate_contents): Don't bomb on zero size relocs. (_bfd_clear_contents): Likewise. * elfxx-mips.c (mips_elf_obtain_contents): Likewise. (mips_elf_perform_relocation): Likewise. * aoutx.h (aout_link_reloc_link_order): Allow for NULL return from malloc on zero size alloc. * cofflink.c (_bfd_coff_reloc_link_order): Likewise. * elflink.c (elf_reloc_link_order): Likewise. * linker.c (_bfd_generic_reloc_link_order): Likewise. * pdp11.c (aout_link_reloc_link_order): Likewise. * xcofflink.c (xcoff_reloc_link_order): Likewise. * aoutx.h (howto_table_ext): Ensure NONE relocs have size 3, bitsize 0, and complain_overflow_dont. * coff-sparc.c (coff_sparc_howto_table): Likewise. * elf-hppa.h (elf_hppa_howto_table): Likewise. * elf-m10200.c (elf_mn10200_howto_table): Likewise. * elf-m10300.c (elf_mn10300_howto_table): Likewise. * elf32-arc.c (elf_arc_howto_table): Likewise. * elf32-arm.c (elf32_arm_howto_table_1): Likewise. * elf32-avr.c (elf_avr_howto_table): Likewise. * elf32-bfin.c (bfin_howto_table): Likewise. * elf32-cr16.c (cr16_elf_howto_table): Likewise. * elf32-cris.c (cris_elf_howto_table): Likewise. * elf32-crx.c (crx_elf_howto_table): Likewise. * elf32-d10v.c (elf_d10v_howto_table): Likewise. * elf32-d30v.c (elf_d30v_howto_table): Likewise. * elf32-dlx.c (dlx_elf_howto_table): Likewise. * elf32-epiphany.c (epiphany_elf_howto_table): Likewise. * elf32-fr30.c (fr30_elf_howto_table): Likewise. * elf32-frv.c (elf32_frv_howto_table): Likewise. * elf32-h8300.c (h8_elf_howto_table): Likewise. * elf32-i370.c (i370_elf_howto_raw): Likewise. * elf32-i386.c (elf_howto_table): Likewise. * elf32-i860.c (elf32_i860_howto_table): Likewise. * elf32-i960.c (elf32_i960_relocate): Likewise. * elf32-ip2k.c (ip2k_elf_howto_table): Likewise. * elf32-iq2000.c (iq2000_elf_howto_table): Likewise. * elf32-lm32.c (lm32_elf_howto_table): Likewise. * elf32-m32c.c (m32c_elf_howto_table): Likewise. * elf32-m32r.c (m32r_elf_howto_table): Likewise. * elf32-m68hc11.c (elf_m68hc11_howto_table): Likewise. * elf32-m68hc12.c (elf_m68hc11_howto_table): Likewise. * elf32-m68k.c (howto_table): Likewise. * elf32-mcore.c (mcore_elf_howto_raw): Likewise. * elf32-mep.c (mep_elf_howto_table): Likewise. * elf32-metag.c (elf_metag_howto_table): Likewise. * elf32-microblaze.c (microblaze_elf_howto_raw): Likewise. * elf32-mips.c (elf_mips_howto_table_rel): Likewise. * elf32-moxie.c (moxie_elf_howto_table): Likewise. * elf32-msp430.c (elf_msp430_howto_table): Likewise. * elf32-mt.c (mt_elf_howto_table): Likewise. * elf32-nds32.c (nds32_elf_howto_table): Likewise. * elf32-nios2.c (elf_nios2_howto_table_rel): Likewise. * elf32-or1k.c (or1k_elf_howto_table): Likewise. * elf32-pj.c (pj_elf_howto_table): Likewise. * elf32-ppc.c (ppc_elf_howto_raw): Likewise. * elf32-rl78.c (rl78_elf_howto_table): Likewise. * elf32-rx.c (rx_elf_howto_table): Likewise. * elf32-s390.c (elf_howto_table): Likewise. * elf32-score.c (elf32_score_howto_table): Likewise. * elf32-score7.c (elf32_score_howto_table): Likewise. * elf32-sh-relocs.h (R_SH_NONE): Likewise. * elf32-spu.c (elf_howto_table): Likewise. * elf32-tic6x.c (elf32_tic6x_howto_table): Likewise. * elf32-tilepro.c (tilepro_elf_howto_table): Likewise. * elf32-v850.c (v850_elf_howto_table): Likewise. * elf32-vax.c (howto_table): Likewise. * elf32-visium.c (visium_elf_howto_table): Likewise. * elf32-xc16x.c (xc16x_elf_howto_table): Likewise. * elf32-xgate.c (elf_xgate_howto_table): Likewise. * elf32-xstormy16.c (xstormy16_elf_howto_table): Likewise. * elf32-xtensa.c (elf_howto_table): Likewise. * elf64-alpha.c (elf64_alpha_howto_table): Likewise. * elf64-mips.c (mips_elf64_howto_table_rel): Likewise. * elf64-mmix.c (elf_mmix_howto_table): Likewise. * elf64-ppc.c (ppc64_elf_howto_raw): Likewise. * elf64-s390.c (elf_howto_table): Likewise. * elf64-sh64.c (sh_elf64_howto_table): Likewise. * elf64-x86-64.c (x86_64_elf_howto_table): Likewise. * elfn32-mips.c (elf_mips_howto_table_rel): Likewise. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Likewise. (elfNN_aarch64_howto_none): Likewise. * elfxx-ia64.c (ia64_howto_table): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_howto_table): Likewise. * elfxx-tilegx.c (tilegx_elf_howto_table): Likewise. * nlm32-sparc.c (nlm32_sparc_howto_table): Likewise.
2015-01-19 01:06:26 +01:00
complain_overflow_dont,/* complain_on_overflow */
2002-12-30 20:25:13 +01:00
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_NONE", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0, /* dst_mask */
FALSE), /* pcrel_offset */
HOWTO (R_MSP430_32, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_bitfield,/* complain_on_overflow */
2002-12-30 20:25:13 +01:00
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_32", /* name */
FALSE, /* partial_inplace */
0xffffffff, /* src_mask */
0xffffffff, /* dst_mask */
FALSE), /* pcrel_offset */
/* A 10 bit PC relative relocation. */
2002-12-30 20:25:13 +01:00
HOWTO (R_MSP430_10_PCREL, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
10, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_bitfield,/* complain_on_overflow */
2002-12-30 20:25:13 +01:00
bfd_elf_generic_reloc, /* special_function */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
"R_MSP430_10_PCREL", /* name */
2002-12-30 20:25:13 +01:00
FALSE, /* partial_inplace */
0x3ff, /* src_mask */
0x3ff, /* dst_mask */
2002-12-30 20:25:13 +01:00
TRUE), /* pcrel_offset */
/* A 16 bit absolute relocation. */
HOWTO (R_MSP430_16, /* type */
0, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
16, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_16", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
2002-12-30 20:25:13 +01:00
0xffff, /* dst_mask */
FALSE), /* pcrel_offset */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* A 16 bit PC relative relocation for command address. */
2002-12-30 20:25:13 +01:00
HOWTO (R_MSP430_16_PCREL, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
16, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_16_PCREL", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
2002-12-30 20:25:13 +01:00
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
/* A 16 bit absolute relocation, byte operations. */
HOWTO (R_MSP430_16_BYTE, /* type */
0, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
16, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_16_BYTE", /* name */
FALSE, /* partial_inplace */
0xffff, /* src_mask */
0xffff, /* dst_mask */
FALSE), /* pcrel_offset */
/* A 16 bit absolute relocation for command address. */
HOWTO (R_MSP430_16_PCREL_BYTE,/* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
16, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_16_PCREL_BYTE",/* name */
2002-12-30 20:25:13 +01:00
FALSE, /* partial_inplace */
0xffff, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
/* A 10 bit PC relative relocation for complicated polymorphs. */
HOWTO (R_MSP430_2X_PCREL, /* type */
1, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
10, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_bitfield,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_2X_PCREL", /* name */
FALSE, /* partial_inplace */
0x3ff, /* src_mask */
0x3ff, /* dst_mask */
TRUE), /* pcrel_offset */
/* A 16 bit relaxable relocation for command address. */
HOWTO (R_MSP430_RL_PCREL, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
16, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_RL_PCREL", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
2002-12-30 20:25:13 +01:00
TRUE) /* pcrel_offset */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* A 8-bit absolute relocation. */
, HOWTO (R_MSP430_8, /* type */
0, /* rightshift */
0, /* size (0 = byte, 1 = short, 2 = long) */
8, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_8", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
FALSE), /* pcrel_offset */
/* Together with a following reloc, allows for the difference
between two symbols to be the real addend of the second reloc. */
HOWTO (R_MSP430_SYM_DIFF, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
rl78_sym_diff_handler, /* special handler. */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
"R_MSP430_SYM_DIFF", /* name */
FALSE, /* partial_inplace */
0xffffffff, /* src_mask */
0xffffffff, /* dst_mask */
2015-08-12 13:32:43 +02:00
FALSE) /* pcrel_offset */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
};
static reloc_howto_type elf_msp430x_howto_table[] =
{
HOWTO (R_MSP430_NONE, /* type */
0, /* rightshift */
Fallout from recent bfd_reloc_outofrange changes Commit ec93045b and cd21f5da introduced a large number of tic4x and tic54x regressions, due to the new checks being wrong for targets with octets_per_byte != 1. To fix that I introduced a new bfd_get_section_limit_octets and performed the check on octets rather than byte adresses, reducing the number of bfd_octets_per_byte calls. bfd_octets_per_byte is rather expensive.. I then wondered why the same bfd_reloc_outofrange check added to bfd_perform_relocation wasn't also added to bfd_install_relocation. The two functions are virtually identical and ought to remain that way. However, adding the same check to bfd_install_relocation resulted in ld-elf "FAIL Link eh-group.o to eh-group" on many ELF targets, including x64_64-linux. The reason being that eh-group.o has NONE relocs at the end of a section, and most targets give NONE relocs a non-zero size. So if we are to keep the new outofrange check it appears that NONE relocs must have a zero size. * bfd-in.h (bfd_get_section_limit_octets): New define, extracted from.. (bfd_get_section_limit): ..here. * reloc.c (bfd_perform_relocation): Correct bfd_reloc_outofrange check. (bfd_install_relocation, _bfd_final_link_relocate): Add same check here. * elf32-sh.c (sh_elf_reloc): Correct bfd_reloc_outofrange check. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Remove duplicated bfd_reloc_outofrange check. * bfd-in2.h: Regenerate. * cpu-ns32k.c (_bfd_do_ns32k_reloc_contents): Return bfd_reloc_ok on zero size relocs. * ecoff.c (ecoff_reloc_link_order): Likewise. * elf32-nds32.c (nds32_relocate_contents): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. * reloc.c (_bfd_relocate_contents): Don't bomb on zero size relocs. (_bfd_clear_contents): Likewise. * elfxx-mips.c (mips_elf_obtain_contents): Likewise. (mips_elf_perform_relocation): Likewise. * aoutx.h (aout_link_reloc_link_order): Allow for NULL return from malloc on zero size alloc. * cofflink.c (_bfd_coff_reloc_link_order): Likewise. * elflink.c (elf_reloc_link_order): Likewise. * linker.c (_bfd_generic_reloc_link_order): Likewise. * pdp11.c (aout_link_reloc_link_order): Likewise. * xcofflink.c (xcoff_reloc_link_order): Likewise. * aoutx.h (howto_table_ext): Ensure NONE relocs have size 3, bitsize 0, and complain_overflow_dont. * coff-sparc.c (coff_sparc_howto_table): Likewise. * elf-hppa.h (elf_hppa_howto_table): Likewise. * elf-m10200.c (elf_mn10200_howto_table): Likewise. * elf-m10300.c (elf_mn10300_howto_table): Likewise. * elf32-arc.c (elf_arc_howto_table): Likewise. * elf32-arm.c (elf32_arm_howto_table_1): Likewise. * elf32-avr.c (elf_avr_howto_table): Likewise. * elf32-bfin.c (bfin_howto_table): Likewise. * elf32-cr16.c (cr16_elf_howto_table): Likewise. * elf32-cris.c (cris_elf_howto_table): Likewise. * elf32-crx.c (crx_elf_howto_table): Likewise. * elf32-d10v.c (elf_d10v_howto_table): Likewise. * elf32-d30v.c (elf_d30v_howto_table): Likewise. * elf32-dlx.c (dlx_elf_howto_table): Likewise. * elf32-epiphany.c (epiphany_elf_howto_table): Likewise. * elf32-fr30.c (fr30_elf_howto_table): Likewise. * elf32-frv.c (elf32_frv_howto_table): Likewise. * elf32-h8300.c (h8_elf_howto_table): Likewise. * elf32-i370.c (i370_elf_howto_raw): Likewise. * elf32-i386.c (elf_howto_table): Likewise. * elf32-i860.c (elf32_i860_howto_table): Likewise. * elf32-i960.c (elf32_i960_relocate): Likewise. * elf32-ip2k.c (ip2k_elf_howto_table): Likewise. * elf32-iq2000.c (iq2000_elf_howto_table): Likewise. * elf32-lm32.c (lm32_elf_howto_table): Likewise. * elf32-m32c.c (m32c_elf_howto_table): Likewise. * elf32-m32r.c (m32r_elf_howto_table): Likewise. * elf32-m68hc11.c (elf_m68hc11_howto_table): Likewise. * elf32-m68hc12.c (elf_m68hc11_howto_table): Likewise. * elf32-m68k.c (howto_table): Likewise. * elf32-mcore.c (mcore_elf_howto_raw): Likewise. * elf32-mep.c (mep_elf_howto_table): Likewise. * elf32-metag.c (elf_metag_howto_table): Likewise. * elf32-microblaze.c (microblaze_elf_howto_raw): Likewise. * elf32-mips.c (elf_mips_howto_table_rel): Likewise. * elf32-moxie.c (moxie_elf_howto_table): Likewise. * elf32-msp430.c (elf_msp430_howto_table): Likewise. * elf32-mt.c (mt_elf_howto_table): Likewise. * elf32-nds32.c (nds32_elf_howto_table): Likewise. * elf32-nios2.c (elf_nios2_howto_table_rel): Likewise. * elf32-or1k.c (or1k_elf_howto_table): Likewise. * elf32-pj.c (pj_elf_howto_table): Likewise. * elf32-ppc.c (ppc_elf_howto_raw): Likewise. * elf32-rl78.c (rl78_elf_howto_table): Likewise. * elf32-rx.c (rx_elf_howto_table): Likewise. * elf32-s390.c (elf_howto_table): Likewise. * elf32-score.c (elf32_score_howto_table): Likewise. * elf32-score7.c (elf32_score_howto_table): Likewise. * elf32-sh-relocs.h (R_SH_NONE): Likewise. * elf32-spu.c (elf_howto_table): Likewise. * elf32-tic6x.c (elf32_tic6x_howto_table): Likewise. * elf32-tilepro.c (tilepro_elf_howto_table): Likewise. * elf32-v850.c (v850_elf_howto_table): Likewise. * elf32-vax.c (howto_table): Likewise. * elf32-visium.c (visium_elf_howto_table): Likewise. * elf32-xc16x.c (xc16x_elf_howto_table): Likewise. * elf32-xgate.c (elf_xgate_howto_table): Likewise. * elf32-xstormy16.c (xstormy16_elf_howto_table): Likewise. * elf32-xtensa.c (elf_howto_table): Likewise. * elf64-alpha.c (elf64_alpha_howto_table): Likewise. * elf64-mips.c (mips_elf64_howto_table_rel): Likewise. * elf64-mmix.c (elf_mmix_howto_table): Likewise. * elf64-ppc.c (ppc64_elf_howto_raw): Likewise. * elf64-s390.c (elf_howto_table): Likewise. * elf64-sh64.c (sh_elf64_howto_table): Likewise. * elf64-x86-64.c (x86_64_elf_howto_table): Likewise. * elfn32-mips.c (elf_mips_howto_table_rel): Likewise. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Likewise. (elfNN_aarch64_howto_none): Likewise. * elfxx-ia64.c (ia64_howto_table): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_howto_table): Likewise. * elfxx-tilegx.c (tilegx_elf_howto_table): Likewise. * nlm32-sparc.c (nlm32_sparc_howto_table): Likewise.
2015-01-19 01:06:26 +01:00
3, /* size (0 = byte, 1 = short, 2 = long) */
0, /* bitsize */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
FALSE, /* pc_relative */
0, /* bitpos */
Fallout from recent bfd_reloc_outofrange changes Commit ec93045b and cd21f5da introduced a large number of tic4x and tic54x regressions, due to the new checks being wrong for targets with octets_per_byte != 1. To fix that I introduced a new bfd_get_section_limit_octets and performed the check on octets rather than byte adresses, reducing the number of bfd_octets_per_byte calls. bfd_octets_per_byte is rather expensive.. I then wondered why the same bfd_reloc_outofrange check added to bfd_perform_relocation wasn't also added to bfd_install_relocation. The two functions are virtually identical and ought to remain that way. However, adding the same check to bfd_install_relocation resulted in ld-elf "FAIL Link eh-group.o to eh-group" on many ELF targets, including x64_64-linux. The reason being that eh-group.o has NONE relocs at the end of a section, and most targets give NONE relocs a non-zero size. So if we are to keep the new outofrange check it appears that NONE relocs must have a zero size. * bfd-in.h (bfd_get_section_limit_octets): New define, extracted from.. (bfd_get_section_limit): ..here. * reloc.c (bfd_perform_relocation): Correct bfd_reloc_outofrange check. (bfd_install_relocation, _bfd_final_link_relocate): Add same check here. * elf32-sh.c (sh_elf_reloc): Correct bfd_reloc_outofrange check. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Remove duplicated bfd_reloc_outofrange check. * bfd-in2.h: Regenerate. * cpu-ns32k.c (_bfd_do_ns32k_reloc_contents): Return bfd_reloc_ok on zero size relocs. * ecoff.c (ecoff_reloc_link_order): Likewise. * elf32-nds32.c (nds32_relocate_contents): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. * reloc.c (_bfd_relocate_contents): Don't bomb on zero size relocs. (_bfd_clear_contents): Likewise. * elfxx-mips.c (mips_elf_obtain_contents): Likewise. (mips_elf_perform_relocation): Likewise. * aoutx.h (aout_link_reloc_link_order): Allow for NULL return from malloc on zero size alloc. * cofflink.c (_bfd_coff_reloc_link_order): Likewise. * elflink.c (elf_reloc_link_order): Likewise. * linker.c (_bfd_generic_reloc_link_order): Likewise. * pdp11.c (aout_link_reloc_link_order): Likewise. * xcofflink.c (xcoff_reloc_link_order): Likewise. * aoutx.h (howto_table_ext): Ensure NONE relocs have size 3, bitsize 0, and complain_overflow_dont. * coff-sparc.c (coff_sparc_howto_table): Likewise. * elf-hppa.h (elf_hppa_howto_table): Likewise. * elf-m10200.c (elf_mn10200_howto_table): Likewise. * elf-m10300.c (elf_mn10300_howto_table): Likewise. * elf32-arc.c (elf_arc_howto_table): Likewise. * elf32-arm.c (elf32_arm_howto_table_1): Likewise. * elf32-avr.c (elf_avr_howto_table): Likewise. * elf32-bfin.c (bfin_howto_table): Likewise. * elf32-cr16.c (cr16_elf_howto_table): Likewise. * elf32-cris.c (cris_elf_howto_table): Likewise. * elf32-crx.c (crx_elf_howto_table): Likewise. * elf32-d10v.c (elf_d10v_howto_table): Likewise. * elf32-d30v.c (elf_d30v_howto_table): Likewise. * elf32-dlx.c (dlx_elf_howto_table): Likewise. * elf32-epiphany.c (epiphany_elf_howto_table): Likewise. * elf32-fr30.c (fr30_elf_howto_table): Likewise. * elf32-frv.c (elf32_frv_howto_table): Likewise. * elf32-h8300.c (h8_elf_howto_table): Likewise. * elf32-i370.c (i370_elf_howto_raw): Likewise. * elf32-i386.c (elf_howto_table): Likewise. * elf32-i860.c (elf32_i860_howto_table): Likewise. * elf32-i960.c (elf32_i960_relocate): Likewise. * elf32-ip2k.c (ip2k_elf_howto_table): Likewise. * elf32-iq2000.c (iq2000_elf_howto_table): Likewise. * elf32-lm32.c (lm32_elf_howto_table): Likewise. * elf32-m32c.c (m32c_elf_howto_table): Likewise. * elf32-m32r.c (m32r_elf_howto_table): Likewise. * elf32-m68hc11.c (elf_m68hc11_howto_table): Likewise. * elf32-m68hc12.c (elf_m68hc11_howto_table): Likewise. * elf32-m68k.c (howto_table): Likewise. * elf32-mcore.c (mcore_elf_howto_raw): Likewise. * elf32-mep.c (mep_elf_howto_table): Likewise. * elf32-metag.c (elf_metag_howto_table): Likewise. * elf32-microblaze.c (microblaze_elf_howto_raw): Likewise. * elf32-mips.c (elf_mips_howto_table_rel): Likewise. * elf32-moxie.c (moxie_elf_howto_table): Likewise. * elf32-msp430.c (elf_msp430_howto_table): Likewise. * elf32-mt.c (mt_elf_howto_table): Likewise. * elf32-nds32.c (nds32_elf_howto_table): Likewise. * elf32-nios2.c (elf_nios2_howto_table_rel): Likewise. * elf32-or1k.c (or1k_elf_howto_table): Likewise. * elf32-pj.c (pj_elf_howto_table): Likewise. * elf32-ppc.c (ppc_elf_howto_raw): Likewise. * elf32-rl78.c (rl78_elf_howto_table): Likewise. * elf32-rx.c (rx_elf_howto_table): Likewise. * elf32-s390.c (elf_howto_table): Likewise. * elf32-score.c (elf32_score_howto_table): Likewise. * elf32-score7.c (elf32_score_howto_table): Likewise. * elf32-sh-relocs.h (R_SH_NONE): Likewise. * elf32-spu.c (elf_howto_table): Likewise. * elf32-tic6x.c (elf32_tic6x_howto_table): Likewise. * elf32-tilepro.c (tilepro_elf_howto_table): Likewise. * elf32-v850.c (v850_elf_howto_table): Likewise. * elf32-vax.c (howto_table): Likewise. * elf32-visium.c (visium_elf_howto_table): Likewise. * elf32-xc16x.c (xc16x_elf_howto_table): Likewise. * elf32-xgate.c (elf_xgate_howto_table): Likewise. * elf32-xstormy16.c (xstormy16_elf_howto_table): Likewise. * elf32-xtensa.c (elf_howto_table): Likewise. * elf64-alpha.c (elf64_alpha_howto_table): Likewise. * elf64-mips.c (mips_elf64_howto_table_rel): Likewise. * elf64-mmix.c (elf_mmix_howto_table): Likewise. * elf64-ppc.c (ppc64_elf_howto_raw): Likewise. * elf64-s390.c (elf_howto_table): Likewise. * elf64-sh64.c (sh_elf64_howto_table): Likewise. * elf64-x86-64.c (x86_64_elf_howto_table): Likewise. * elfn32-mips.c (elf_mips_howto_table_rel): Likewise. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Likewise. (elfNN_aarch64_howto_none): Likewise. * elfxx-ia64.c (ia64_howto_table): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_howto_table): Likewise. * elfxx-tilegx.c (tilegx_elf_howto_table): Likewise. * nlm32-sparc.c (nlm32_sparc_howto_table): Likewise.
2015-01-19 01:06:26 +01:00
complain_overflow_dont,/* complain_on_overflow */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_NONE", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0, /* dst_mask */
FALSE), /* pcrel_offset */
HOWTO (R_MSP430_ABS32, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_bitfield,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_ABS32", /* name */
FALSE, /* partial_inplace */
0xffffffff, /* src_mask */
0xffffffff, /* dst_mask */
FALSE), /* pcrel_offset */
HOWTO (R_MSP430_ABS16, /* type */
0, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
16, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_ABS16", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
FALSE), /* pcrel_offset */
HOWTO (R_MSP430_ABS8, /* type */
0, /* rightshift */
0, /* size (0 = byte, 1 = short, 2 = long) */
8, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_bitfield,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_ABS8", /* name */
FALSE, /* partial_inplace */
0xff, /* src_mask */
0xff, /* dst_mask */
FALSE), /* pcrel_offset */
HOWTO (R_MSP430_PCR16, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
16, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_PCR16", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_PCR20_EXT_SRC,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_PCR20_EXT_SRC",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_PCR20_EXT_DST,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_PCR20_EXT_DST",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_PCR20_EXT_ODST,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_PCR20_EXT_ODST",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_ABS20_EXT_SRC,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_ABS20_EXT_SRC",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_ABS20_EXT_DST,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_ABS20_EXT_DST",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_ABS20_EXT_ODST,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_ABS20_EXT_ODST",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_ABS20_ADR_SRC,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_ABS20_ADR_SRC",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_ABS20_ADR_DST,/* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_ABS20_ADR_DST",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_PCR16, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_PCR16", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_PCR20_CALL, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_PCR20_CALL",/* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430X_ABS16, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_ABS16", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430_ABS_HI16, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_ABS_HI16", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
HOWTO (R_MSP430_PREL31, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430_PREL31", /* name */
FALSE, /* partial_inplace */
0, /* src_mask */
0xffff, /* dst_mask */
TRUE), /* pcrel_offset */
EMPTY_HOWTO (R_MSP430_EHTYPE),
2015-08-12 13:32:43 +02:00
/* A 10 bit PC relative relocation. */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
HOWTO (R_MSP430X_10_PCREL, /* type */
1, /* rightshift */
1, /* size (0 = byte, 1 = short, 2 = long) */
10, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_bitfield,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_10_PCREL", /* name */
FALSE, /* partial_inplace */
0x3ff, /* src_mask */
0x3ff, /* dst_mask */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
TRUE), /* pcrel_offset */
/* A 10 bit PC relative relocation for complicated polymorphs. */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
HOWTO (R_MSP430X_2X_PCREL, /* type */
1, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
10, /* bitsize */
TRUE, /* pc_relative */
0, /* bitpos */
complain_overflow_bitfield,/* complain_on_overflow */
bfd_elf_generic_reloc, /* special_function */
"R_MSP430X_2X_PCREL", /* name */
FALSE, /* partial_inplace */
0x3ff, /* src_mask */
0x3ff, /* dst_mask */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
TRUE), /* pcrel_offset */
/* Together with a following reloc, allows for the difference
between two symbols to be the real addend of the second reloc. */
HOWTO (R_MSP430X_SYM_DIFF, /* type */
0, /* rightshift */
2, /* size (0 = byte, 1 = short, 2 = long) */
32, /* bitsize */
FALSE, /* pc_relative */
0, /* bitpos */
complain_overflow_dont,/* complain_on_overflow */
rl78_sym_diff_handler, /* special handler. */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
"R_MSP430X_SYM_DIFF", /* name */
FALSE, /* partial_inplace */
0xffffffff, /* src_mask */
0xffffffff, /* dst_mask */
2015-08-12 13:32:43 +02:00
FALSE) /* pcrel_offset */
2002-12-30 20:25:13 +01:00
};
/* Map BFD reloc types to MSP430 ELF reloc types. */
struct msp430_reloc_map
{
bfd_reloc_code_real_type bfd_reloc_val;
unsigned int elf_reloc_val;
};
static const struct msp430_reloc_map msp430_reloc_map[] =
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
{
{BFD_RELOC_NONE, R_MSP430_NONE},
{BFD_RELOC_32, R_MSP430_32},
{BFD_RELOC_MSP430_10_PCREL, R_MSP430_10_PCREL},
{BFD_RELOC_16, R_MSP430_16_BYTE},
{BFD_RELOC_MSP430_16_PCREL, R_MSP430_16_PCREL},
{BFD_RELOC_MSP430_16, R_MSP430_16},
{BFD_RELOC_MSP430_16_PCREL_BYTE, R_MSP430_16_PCREL_BYTE},
{BFD_RELOC_MSP430_16_BYTE, R_MSP430_16_BYTE},
{BFD_RELOC_MSP430_2X_PCREL, R_MSP430_2X_PCREL},
{BFD_RELOC_MSP430_RL_PCREL, R_MSP430_RL_PCREL},
{BFD_RELOC_8, R_MSP430_8},
{BFD_RELOC_MSP430_SYM_DIFF, R_MSP430_SYM_DIFF}
};
static const struct msp430_reloc_map msp430x_reloc_map[] =
{
{BFD_RELOC_NONE, R_MSP430_NONE},
{BFD_RELOC_32, R_MSP430_ABS32},
{BFD_RELOC_16, R_MSP430_ABS16},
{BFD_RELOC_8, R_MSP430_ABS8},
{BFD_RELOC_MSP430_ABS8, R_MSP430_ABS8},
{BFD_RELOC_MSP430X_PCR20_EXT_SRC, R_MSP430X_PCR20_EXT_SRC},
{BFD_RELOC_MSP430X_PCR20_EXT_DST, R_MSP430X_PCR20_EXT_DST},
{BFD_RELOC_MSP430X_PCR20_EXT_ODST, R_MSP430X_PCR20_EXT_ODST},
{BFD_RELOC_MSP430X_ABS20_EXT_SRC, R_MSP430X_ABS20_EXT_SRC},
{BFD_RELOC_MSP430X_ABS20_EXT_DST, R_MSP430X_ABS20_EXT_DST},
{BFD_RELOC_MSP430X_ABS20_EXT_ODST, R_MSP430X_ABS20_EXT_ODST},
{BFD_RELOC_MSP430X_ABS20_ADR_SRC, R_MSP430X_ABS20_ADR_SRC},
{BFD_RELOC_MSP430X_ABS20_ADR_DST, R_MSP430X_ABS20_ADR_DST},
{BFD_RELOC_MSP430X_PCR16, R_MSP430X_PCR16},
{BFD_RELOC_MSP430X_PCR20_CALL, R_MSP430X_PCR20_CALL},
{BFD_RELOC_MSP430X_ABS16, R_MSP430X_ABS16},
{BFD_RELOC_MSP430_ABS_HI16, R_MSP430_ABS_HI16},
{BFD_RELOC_MSP430_PREL31, R_MSP430_PREL31},
{BFD_RELOC_MSP430_10_PCREL, R_MSP430X_10_PCREL},
{BFD_RELOC_MSP430_2X_PCREL, R_MSP430X_2X_PCREL},
{BFD_RELOC_MSP430_RL_PCREL, R_MSP430X_PCR16},
{BFD_RELOC_MSP430_SYM_DIFF, R_MSP430X_SYM_DIFF}
};
static inline bfd_boolean
uses_msp430x_relocs (bfd * abfd)
{
bfd target vector rationalisation This renames the bfd targets to <cpu>_<format>_<other>_<endian>_vec. So for example, bfd_elf32_ntradlittlemips_vec becomes mips_elf32_ntrad_le_vec and hp300bsd_vec becomes m68k_aout_hp300bsd_vec. bfd/ * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-ns32k.c, * aout-sparcle.c, * aout0.c, * aoutx.h, * armnetbsd.c, * bout.c, * cf-i386lynx.c, * cf-sparclynx.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-aux.c, * coff-go32.c, * coff-h8300.c, * coff-h8500.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mips.c, * coff-rs6000.c, * coff-sh.c, * coff-sparc.c, * coff-stgo32.c, * coff-svm68k.c, * coff-tic80.c, * coff-u68k.c, * coff-w65.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * config.bfd, * configure.com, * configure.in, * demo64.c, * elf-m10200.c, * elf-m10300.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-gen.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-gen.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * epoc-pe-arm.c, * epoc-pei-arm.c, * hp300bsd.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386bsd.c, * i386dynix.c, * i386freebsd.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * i386os9k.c, * irix-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * m88kopenbsd.c, * mach-o-i386.c, * mach-o-x86-64.c, * makefile.vms, * mipsbsd.c, * mmo.c, * netbsd-core.c, * newsos3.c, * nlm32-alpha.c, * nlm32-i386.c, * nlm32-ppc.c, * nlm32-sparc.c, * ns32knetbsd.c, * osf-core.c, * pc532-mach.c, * pe-arm-wince.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-ppc.c, * pe-sh.c, * pe-x86_64.c, * pei-arm-wince.c, * pei-arm.c, * pei-i386.c, * pei-ia64.c, * pei-mcore.c, * pei-mips.c, * pei-ppc.c, * pei-sh.c, * pei-x86_64.c, * ppcboot.c, * ptrace-core.c, * riscix.c, * sco5-core.c, * som.c, * sparclinux.c, * sparclynx.c, * sparcnetbsd.c, * sunos.c, * targets.c, * trad-core.c, * vax1knetbsd.c, * vaxbsd.c, * vaxnetbsd.c, * versados.c, * vms-alpha.c, * vms-lib.c: Rename bfd targets to <cpu>_<format>_<other>_<endian>_vec. Adjust associated MY macros on aout targets. * configure: Regenerate. binutils/ * emul_aix.c: Update bfd target vector naming. * testsuite/binutils-all/objcopy.exp: Likewise. ld/ * emultempl/metagelf.em: Update bfd target vector naming. * emultempl/nios2elf.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/tic6xdsbt.em: Likewise.
2014-05-02 12:39:40 +02:00
extern const bfd_target msp430_elf32_ti_vec;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
return bfd_get_mach (abfd) == bfd_mach_msp430x
bfd target vector rationalisation This renames the bfd targets to <cpu>_<format>_<other>_<endian>_vec. So for example, bfd_elf32_ntradlittlemips_vec becomes mips_elf32_ntrad_le_vec and hp300bsd_vec becomes m68k_aout_hp300bsd_vec. bfd/ * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-ns32k.c, * aout-sparcle.c, * aout0.c, * aoutx.h, * armnetbsd.c, * bout.c, * cf-i386lynx.c, * cf-sparclynx.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-aux.c, * coff-go32.c, * coff-h8300.c, * coff-h8500.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mips.c, * coff-rs6000.c, * coff-sh.c, * coff-sparc.c, * coff-stgo32.c, * coff-svm68k.c, * coff-tic80.c, * coff-u68k.c, * coff-w65.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * config.bfd, * configure.com, * configure.in, * demo64.c, * elf-m10200.c, * elf-m10300.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-gen.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-gen.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * epoc-pe-arm.c, * epoc-pei-arm.c, * hp300bsd.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386bsd.c, * i386dynix.c, * i386freebsd.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * i386os9k.c, * irix-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * m88kopenbsd.c, * mach-o-i386.c, * mach-o-x86-64.c, * makefile.vms, * mipsbsd.c, * mmo.c, * netbsd-core.c, * newsos3.c, * nlm32-alpha.c, * nlm32-i386.c, * nlm32-ppc.c, * nlm32-sparc.c, * ns32knetbsd.c, * osf-core.c, * pc532-mach.c, * pe-arm-wince.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-ppc.c, * pe-sh.c, * pe-x86_64.c, * pei-arm-wince.c, * pei-arm.c, * pei-i386.c, * pei-ia64.c, * pei-mcore.c, * pei-mips.c, * pei-ppc.c, * pei-sh.c, * pei-x86_64.c, * ppcboot.c, * ptrace-core.c, * riscix.c, * sco5-core.c, * som.c, * sparclinux.c, * sparclynx.c, * sparcnetbsd.c, * sunos.c, * targets.c, * trad-core.c, * vax1knetbsd.c, * vaxbsd.c, * vaxnetbsd.c, * versados.c, * vms-alpha.c, * vms-lib.c: Rename bfd targets to <cpu>_<format>_<other>_<endian>_vec. Adjust associated MY macros on aout targets. * configure: Regenerate. binutils/ * emul_aix.c: Update bfd target vector naming. * testsuite/binutils-all/objcopy.exp: Likewise. ld/ * emultempl/metagelf.em: Update bfd target vector naming. * emultempl/nios2elf.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/tic6xdsbt.em: Likewise.
2014-05-02 12:39:40 +02:00
|| abfd->xvec == & msp430_elf32_ti_vec;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
}
2002-12-30 20:25:13 +01:00
static reloc_howto_type *
bfd_elf32_bfd_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED,
bfd_reloc_code_real_type code)
2002-12-30 20:25:13 +01:00
{
unsigned int i;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
if (uses_msp430x_relocs (abfd))
{
for (i = ARRAY_SIZE (msp430x_reloc_map); i--;)
if (msp430x_reloc_map[i].bfd_reloc_val == code)
return elf_msp430x_howto_table + msp430x_reloc_map[i].elf_reloc_val;
}
else
{
for (i = 0; i < ARRAY_SIZE (msp430_reloc_map); i++)
if (msp430_reloc_map[i].bfd_reloc_val == code)
return &elf_msp430_howto_table[msp430_reloc_map[i].elf_reloc_val];
}
2002-12-30 20:25:13 +01:00
return NULL;
}
* aout-adobe.c (aout_32_bfd_reloc_name_lookup): Define. * aout-arm.c (MY_bfd_reloc_name_lookup): Define. (MY (bfd_reloc_name_lookup)): New function. * aout-ns32k.c (MY (bfd_reloc_name_lookup)): New function. * aout-target.h (NAME (aout, reloc_name_lookup)): Declare. (MY_bfd_reloc_name_lookup): Define. * aout-tic30.c (tic30_aout_reloc_name_lookup): New function. (MY_bfd_reloc_name_lookup): Define. * aoutx.h (NAME (aout, reloc_type_lookup)): Don't declare. (NAME (aout, reloc_name_lookup)): New function. * bout.c (b_out_bfd_reloc_name_lookup): New function. * coff-alpha.c (alpha_bfd_reloc_name_lookup): New function. (_bfd_ecoff_bfd_reloc_name_lookup): Define. * coff-arm.c (coff_arm_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-i386.c (coff_bfd_reloc_name_lookup): Define. (coff_i386_reloc_name_lookup): New function. * coff-i860.c (coff_i860_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-i960.c (coff_i960_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-m68k.c (m68k_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-maxq.c (maxq_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-mcore.c (mcore_coff_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-mips.c (mips_bfd_reloc_name_lookup): New function. (_bfd_ecoff_bfd_reloc_name_lookup): Define. * coff-ppc.c (ppc_coff_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-rs6000.c (coff_bfd_reloc_name_lookup): Define. (_bfd_xcoff_reloc_name_lookup): New function. (rs6000coff_vec, pmac_xcoff_vec): Init new field. * coff-sh.c (coff_bfd_reloc_name_lookup): Define. (sh_coff_reloc_name_lookup): New function. * coff-sparc.c (coff_sparc_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-tic30.c (coff_bfd_reloc_name_lookup): Define. (tic30_coff_reloc_name_lookup): New function. * coff-tic4x.c (coff_bfd_reloc_name_lookup): Define. (tic4x_coff_reloc_name_lookup): New function. * coff-tic54x.c (coff_bfd_reloc_name_lookup): Define. (tic54x_coff_reloc_name_lookup): New function. * coff-x86_64.c (coff_bfd_reloc_name_lookup): Define. (coff_amd64_reloc_name_lookup): New function. * coff-z80.c (coff_z80_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-z8k.c (coff_z8k_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff64-rs6000.c (coff_bfd_reloc_name_lookup): Define. (xcoff64_reloc_name_lookup): New function. (rs6000coff64_vec, aix5coff64_vec): Init new field. * coffcode.h (coff_bfd_reloc_name_lookup): Define. * elf-hppa.h (elf_hppa_reloc_name_lookup): New function. * elf-m10200.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf-m10300.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-arc.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-arm.c (elf32_arm_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-avr.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-bfin.c (bfin_bfd_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-cr16c.c (elf_cr16c_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-cris.c (cris_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-crx.c (elf_crx_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-d10v.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-d30v.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-dlx.c (elf32_dlx_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-fr30.c (fr30_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-frv.c (frv_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-gen.c (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-h8300.c (elf32_h8_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-hppa.c (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-i370.c (i370_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-i386.c (elf_i386_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-i860.c (elf32_i860_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-i960.c (elf32_i960_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-ip2k.c (ip2k_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-iq2000.c (iq2000_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-m32c.c (m32c_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-m32r.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-m68hc11.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-m68hc12.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-m68k.c (reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-m88k.c (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-mcore.c (mcore_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-mep.c (mep_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-mips.c (bfd_elf32_bfd_reloc_name_lookup): New function. (mips_vxworks_bfd_reloc_name_lookup): Likewise. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-msp430.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-mt.c (mt_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-openrisc.c (openrisc_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-or32.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-pj.c (pj_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-ppc.c (ppc_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-s390.c (elf_s390_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-score.c (elf32_score_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-sh.c (sh_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-sparc.c (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-spu.c (spu_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-v850.c (v850_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-vax.c (reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-xc16x.c (xc16x_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-xstormy16.c (xstormy16_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-xtensa.c (elf_xtensa_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf64-alpha.c (elf64_alpha_bfd_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-gen.c (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-hppa.c (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-mips.c (bfd_elf64_bfd_reloc_name_lookup): New function. * elf64-mmix.c (bfd_elf64_bfd_reloc_name_lookup): New function. * elf64-ppc.c (ppc64_elf_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-s390.c (elf_s390_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-sh64.c (sh_elf64_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-sparc.c (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-x86-64.c (elf64_x86_64_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elfn32-mips.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elfxx-ia64.c (elfNN_ia64_reloc_name_lookup): New function. (bfd_elfNN_bfd_reloc_name_lookup): Define. * elfxx-sparc.c (_bfd_sparc_elf_reloc_name_lookup): New function. * elfxx-sparc.h (_bfd_sparc_elf_reloc_name_lookup): Declare. * i386msdos.c (msdos_bfd_reloc_name_lookup): Define. * i386os9k.c (aout_32_bfd_reloc_name_lookup): Define. * ieee.c (ieee_bfd_reloc_name_lookup): Define. * libaout.h (NAME (aout, reloc_name_lookup)): Declare. * libbfd-in.h (_bfd_norelocs_bfd_reloc_name_lookup): Declare. * mipsbsd.c (MY_bfd_reloc_name_lookup): Define. (MY(reloc_type_lookup)): Rename from MY(reloc_howto_type_lookup). (MY(reloc_name_lookup)): New function. * nlm-target.h (nlm_bfd_reloc_name_lookup): Define. * oasys.c (oasys_bfd_reloc_name_lookup): Define. * pdp11.c (NAME (aout, reloc_name_lookup)): New function. * pe-mips.c (coff_mips_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * reloc.c (bfd_reloc_name_lookup): New function. * riscix.c (riscix_reloc_name_lookup): New function. (MY_bfd_reloc_name_lookup): Define. * som.c (som_bfd_reloc_name_lookup): New function. * targets.c (struct bfd_target): Add reloc_name_lookup. (BFD_JUMP_TABLE_RELOCS): Add NAME##_bfd_reloc_name_lookup. * versados.c (versados_bfd_reloc_name_lookup): Define. * vms.c (vms_bfd_reloc_name_lookup): New function. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate.
2007-03-26 14:23:03 +02:00
static reloc_howto_type *
bfd_elf32_bfd_reloc_name_lookup (bfd *abfd ATTRIBUTE_UNUSED,
const char *r_name)
{
unsigned int i;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
if (uses_msp430x_relocs (abfd))
{
for (i = ARRAY_SIZE (elf_msp430x_howto_table); i--;)
if (elf_msp430x_howto_table[i].name != NULL
&& strcasecmp (elf_msp430x_howto_table[i].name, r_name) == 0)
return elf_msp430x_howto_table + i;
}
else
{
for (i = 0;
i < (sizeof (elf_msp430_howto_table)
/ sizeof (elf_msp430_howto_table[0]));
i++)
if (elf_msp430_howto_table[i].name != NULL
&& strcasecmp (elf_msp430_howto_table[i].name, r_name) == 0)
return &elf_msp430_howto_table[i];
}
* aout-adobe.c (aout_32_bfd_reloc_name_lookup): Define. * aout-arm.c (MY_bfd_reloc_name_lookup): Define. (MY (bfd_reloc_name_lookup)): New function. * aout-ns32k.c (MY (bfd_reloc_name_lookup)): New function. * aout-target.h (NAME (aout, reloc_name_lookup)): Declare. (MY_bfd_reloc_name_lookup): Define. * aout-tic30.c (tic30_aout_reloc_name_lookup): New function. (MY_bfd_reloc_name_lookup): Define. * aoutx.h (NAME (aout, reloc_type_lookup)): Don't declare. (NAME (aout, reloc_name_lookup)): New function. * bout.c (b_out_bfd_reloc_name_lookup): New function. * coff-alpha.c (alpha_bfd_reloc_name_lookup): New function. (_bfd_ecoff_bfd_reloc_name_lookup): Define. * coff-arm.c (coff_arm_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-i386.c (coff_bfd_reloc_name_lookup): Define. (coff_i386_reloc_name_lookup): New function. * coff-i860.c (coff_i860_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-i960.c (coff_i960_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-m68k.c (m68k_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-maxq.c (maxq_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-mcore.c (mcore_coff_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-mips.c (mips_bfd_reloc_name_lookup): New function. (_bfd_ecoff_bfd_reloc_name_lookup): Define. * coff-ppc.c (ppc_coff_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-rs6000.c (coff_bfd_reloc_name_lookup): Define. (_bfd_xcoff_reloc_name_lookup): New function. (rs6000coff_vec, pmac_xcoff_vec): Init new field. * coff-sh.c (coff_bfd_reloc_name_lookup): Define. (sh_coff_reloc_name_lookup): New function. * coff-sparc.c (coff_sparc_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-tic30.c (coff_bfd_reloc_name_lookup): Define. (tic30_coff_reloc_name_lookup): New function. * coff-tic4x.c (coff_bfd_reloc_name_lookup): Define. (tic4x_coff_reloc_name_lookup): New function. * coff-tic54x.c (coff_bfd_reloc_name_lookup): Define. (tic54x_coff_reloc_name_lookup): New function. * coff-x86_64.c (coff_bfd_reloc_name_lookup): Define. (coff_amd64_reloc_name_lookup): New function. * coff-z80.c (coff_z80_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff-z8k.c (coff_z8k_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * coff64-rs6000.c (coff_bfd_reloc_name_lookup): Define. (xcoff64_reloc_name_lookup): New function. (rs6000coff64_vec, aix5coff64_vec): Init new field. * coffcode.h (coff_bfd_reloc_name_lookup): Define. * elf-hppa.h (elf_hppa_reloc_name_lookup): New function. * elf-m10200.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf-m10300.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-arc.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-arm.c (elf32_arm_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-avr.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-bfin.c (bfin_bfd_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-cr16c.c (elf_cr16c_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-cris.c (cris_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-crx.c (elf_crx_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-d10v.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-d30v.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-dlx.c (elf32_dlx_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-fr30.c (fr30_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-frv.c (frv_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-gen.c (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-h8300.c (elf32_h8_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-hppa.c (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-i370.c (i370_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-i386.c (elf_i386_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-i860.c (elf32_i860_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-i960.c (elf32_i960_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-ip2k.c (ip2k_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-iq2000.c (iq2000_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-m32c.c (m32c_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-m32r.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-m68hc11.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-m68hc12.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-m68k.c (reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-m88k.c (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-mcore.c (mcore_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-mep.c (mep_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-mips.c (bfd_elf32_bfd_reloc_name_lookup): New function. (mips_vxworks_bfd_reloc_name_lookup): Likewise. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-msp430.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-mt.c (mt_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-openrisc.c (openrisc_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-or32.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elf32-pj.c (pj_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-ppc.c (ppc_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-s390.c (elf_s390_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-score.c (elf32_score_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-sh.c (sh_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-sparc.c (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-spu.c (spu_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-v850.c (v850_elf_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-vax.c (reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-xc16x.c (xc16x_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-xstormy16.c (xstormy16_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf32-xtensa.c (elf_xtensa_reloc_name_lookup): New function. (bfd_elf32_bfd_reloc_name_lookup): Define. * elf64-alpha.c (elf64_alpha_bfd_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-gen.c (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-hppa.c (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-mips.c (bfd_elf64_bfd_reloc_name_lookup): New function. * elf64-mmix.c (bfd_elf64_bfd_reloc_name_lookup): New function. * elf64-ppc.c (ppc64_elf_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-s390.c (elf_s390_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-sh64.c (sh_elf64_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-sparc.c (bfd_elf64_bfd_reloc_name_lookup): Define. * elf64-x86-64.c (elf64_x86_64_reloc_name_lookup): New function. (bfd_elf64_bfd_reloc_name_lookup): Define. * elfn32-mips.c (bfd_elf32_bfd_reloc_name_lookup): New function. * elfxx-ia64.c (elfNN_ia64_reloc_name_lookup): New function. (bfd_elfNN_bfd_reloc_name_lookup): Define. * elfxx-sparc.c (_bfd_sparc_elf_reloc_name_lookup): New function. * elfxx-sparc.h (_bfd_sparc_elf_reloc_name_lookup): Declare. * i386msdos.c (msdos_bfd_reloc_name_lookup): Define. * i386os9k.c (aout_32_bfd_reloc_name_lookup): Define. * ieee.c (ieee_bfd_reloc_name_lookup): Define. * libaout.h (NAME (aout, reloc_name_lookup)): Declare. * libbfd-in.h (_bfd_norelocs_bfd_reloc_name_lookup): Declare. * mipsbsd.c (MY_bfd_reloc_name_lookup): Define. (MY(reloc_type_lookup)): Rename from MY(reloc_howto_type_lookup). (MY(reloc_name_lookup)): New function. * nlm-target.h (nlm_bfd_reloc_name_lookup): Define. * oasys.c (oasys_bfd_reloc_name_lookup): Define. * pdp11.c (NAME (aout, reloc_name_lookup)): New function. * pe-mips.c (coff_mips_reloc_name_lookup): New function. (coff_bfd_reloc_name_lookup): Define. * reloc.c (bfd_reloc_name_lookup): New function. * riscix.c (riscix_reloc_name_lookup): New function. (MY_bfd_reloc_name_lookup): Define. * som.c (som_bfd_reloc_name_lookup): New function. * targets.c (struct bfd_target): Add reloc_name_lookup. (BFD_JUMP_TABLE_RELOCS): Add NAME##_bfd_reloc_name_lookup. * versados.c (versados_bfd_reloc_name_lookup): Define. * vms.c (vms_bfd_reloc_name_lookup): New function. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate.
2007-03-26 14:23:03 +02:00
return NULL;
}
2002-12-30 20:25:13 +01:00
/* Set the howto pointer for an MSP430 ELF reloc. */
static void
msp430_info_to_howto_rela (bfd * abfd ATTRIBUTE_UNUSED,
arelent * cache_ptr,
Elf_Internal_Rela * dst)
2002-12-30 20:25:13 +01:00
{
unsigned int r_type;
r_type = ELF32_R_TYPE (dst->r_info);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
if (uses_msp430x_relocs (abfd))
{
More fixes for memory access violations exposed by fuzzed binaries. PR binutils/17512 * archive.c (do_slurp_bsd_armap): Return if the parsed_size is zero. (bfd_slurp_armap): Zero terminate the name. (bfd_generic_stat_arch_elt): If there is no header, fail. * elf32-arc.c (arc_info_to_howto_rel): Replace BFD_ASSERT with error message. * elf32-avr.c (avr_info_to_howto_rela): Likewise. * elf32-cr16c.c (elf_cr16c_info_to_howto_rel): Likewise. * elf32-cris.c (cris_info_to_howto_rela): Likewise. * elf32-d10v.c (d10v_info_to_howto_rel): Likewise. * elf32-d30v.c (d30v_info_to_howto_rel): Likewise. * elf32-dlx.c (dlx_rtype_to_howto): Likewise. * elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise. * elf32-fr30.c (fr30_info_to_howto_rela): Likewise. * elf32-frv.c (frv_info_to_howto_rela): Likewise. * elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise. * elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise. * elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise. * elf32-lm32.c (lm32_info_to_howto_rela): Likewise. * elf32-m32c.c (m32c_info_to_howto_rela): Likewise. * elf32-m32r.c (m32r_info_to_howto_rel): Likewise. * elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise. * elf32-mep.c (mep_info_to_howto_rela): Likewise. * elf32-metag.c (metag_info_to_howto_rela): Likewise. * elf32-moxie.c (moxie_info_to_howto_rela): Likewise. * elf32-msp430.c (msp430_info_to_howto_rela): Likewise. * elf32-mt.c (mt_info_to_howto_rela): Likewise. * elf32-nds32.c (nds32_info_to_howto_rel): Likewise. * elf32-or1k.c (or1k_info_to_howto_rela): Likewise. * elf32-rl78.c (rl78_info_to_howto_rela): Likewise. * elf32-rx.c (rx_info_to_howto_rela): Likewise. * elf32-v850.c (v850_elf_info_to_howto_rel): Likewise. * elf32-visium.c (visium_info_to_howto_rela): Likewise. * elf32-xgate.c (xgate_info_to_howto_rel): Likewise. * elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise. * elf64-mmix.c (mmix_info_to_howto_rela): Likewise. * elf64-x86-64.c (elf_x86_64_reloc_type_lookup): Likewise. * elfnn-aarch64.c (elfNN_aarch64_bfd_reloc_from_type): Likewise. * elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Add range checking of reloc symbol index. * mach-o.c (bfd_mach_o_canonicalize_one_reloc): If no symbols have been provided then set the reloc's symbol to undefined. * reloc.c (bfd_generic_get_relocated_section_contents): Add range checking of the reloc to be applied. * versados.c (process_otr): Add more range checks. (versados_canonicalize_reloc): If the section is unknown, set the symbol to undefined. * vms-alpha.c (_bfd_vms_slurp_eisd): Add range checks. (alpha_vms_object_p): Likewise.
2014-12-22 21:59:00 +01:00
if (r_type >= (unsigned int) R_MSP430x_max)
{
More fixes for illegal memory accesses triggered by running objdump on fuzzed binaries. PR binutils/17512 * objdump.c (display_any_bfd): Fail if archives nest too deeply. * ecoff.c: Use bfd_alloc2 to allocate space for structure arrays. (_bfd_ecoff_slurp_symbol_table): Check for a negative symbol index or an out of range fdr index. * elf-m10300.c (mn10300_info_to_howto): Fix typo in error message. * elf32-arc.c (arc_info_to_howto_rel): Likewise. * elf32-avr.c (avr_info_to_howto_rela): Likewise. * elf32-cr16.c (elf_cr16_info_to_howto): Likewise. * elf32-cr16c.c (elf_cr16c_info_to_howto_rel): Likewise. * elf32-cris.c (cris_info_to_howto_rela): Likewise. * elf32-crx.c (elf_crx_info_to_howto): Likewise. * elf32-d10v.c (d10v_info_to_howto_rel): Likewise. * elf32-d30v.c (d30v_info_to_howto_rel): Likewise. * elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise. * elf32-fr30.c (fr30_info_to_howto_rela): Likewise. * elf32-frv.c (frv_info_to_howto_rela): Likewise. * elf32-i370.c (i370_elf_info_to_howto): Likewise. * elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise. * elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise. * elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise. * elf32-lm32.c (lm32_info_to_howto_rela): Likewise. * elf32-m32c.c (m32c_info_to_howto_rela): Likewise. * elf32-m32r.c (m32r_info_to_howto_rel): Likewise. * elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise. * elf32-mcore.c (mcore_elf_info_to_howto): Likewise. * elf32-mep.c (mep_info_to_howto_rela): Likewise. * elf32-metag.c (metag_info_to_howto_rela): Likewise. * elf32-microblaze.c (microblaze_elf_info_to_howto): Likewise. * elf32-moxie.c (moxie_info_to_howto_rela): Likewise. * elf32-msp430.c (msp430_info_to_howto_rela): Likewise. * elf32-mt.c (mt_info_to_howto_rela): Likewise. * elf32-nds32.c (nds32_info_to_howto_rel): Likewise. * elf32-or1k.c (or1k_info_to_howto_rela): Likewise. * elf32-pj.c (pj_elf_info_to_howto): Likewise. * elf32-ppc.c (ppc_elf_info_to_howto): Likewise. * elf32-rl78.c (rl78_info_to_howto_rela): Likewise. * elf32-rx.c (rx_info_to_howto_rela): Likewise. * elf32-sh.c (sh_elf_info_to_howto): Likewise. * elf32-spu.c (spu_elf_info_to_howto): Likewise. * elf32-v850.c (v850_elf_perform_relocation): Likewise. * elf32-vax.c (rtype_to_howto): Likewise. * elf32-visium.c (visium_info_to_howto_rela): Likewise. * elf32-xgate.c (xgate_info_to_howto_rel): Likewise. * elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise. * elf64-alpha.c (elf64_alpha_info_to_howto): Likewise. * elf64-mmix.c (mmix_info_to_howto_rela): Likewise. * mach-o.c: Use bfd_alloc2 to allocate space for structure arrays. (bfd_mach_o_canonicalize_one_reloc): Fix check on out of range symbol indicies. (bfd_mach_o_canonicalize_relocs): Check for out of range alloc. (bfd_mach_o_canonicalize_dynamic_reloc): Likewise. (bfd_mach_o_build_dysymtab): Likewise. (bfd_mach_o_write_symtab_content): Set the string table size to zero upon error. (bfd_mach_o_read_symtab_symbols): Reset the nsyms value if the read fails. * peXXigen.c (pe_print_edata): Check for numeric overflow in edt fields. * tekhex.c (first_phase): Check for src pointer reaching end of buffer.
2015-02-03 15:34:54 +01:00
_bfd_error_handler (_("%B: invalid MSP430X reloc number: %d"), abfd, r_type);
More fixes for memory access violations exposed by fuzzed binaries. PR binutils/17512 * archive.c (do_slurp_bsd_armap): Return if the parsed_size is zero. (bfd_slurp_armap): Zero terminate the name. (bfd_generic_stat_arch_elt): If there is no header, fail. * elf32-arc.c (arc_info_to_howto_rel): Replace BFD_ASSERT with error message. * elf32-avr.c (avr_info_to_howto_rela): Likewise. * elf32-cr16c.c (elf_cr16c_info_to_howto_rel): Likewise. * elf32-cris.c (cris_info_to_howto_rela): Likewise. * elf32-d10v.c (d10v_info_to_howto_rel): Likewise. * elf32-d30v.c (d30v_info_to_howto_rel): Likewise. * elf32-dlx.c (dlx_rtype_to_howto): Likewise. * elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise. * elf32-fr30.c (fr30_info_to_howto_rela): Likewise. * elf32-frv.c (frv_info_to_howto_rela): Likewise. * elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise. * elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise. * elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise. * elf32-lm32.c (lm32_info_to_howto_rela): Likewise. * elf32-m32c.c (m32c_info_to_howto_rela): Likewise. * elf32-m32r.c (m32r_info_to_howto_rel): Likewise. * elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise. * elf32-mep.c (mep_info_to_howto_rela): Likewise. * elf32-metag.c (metag_info_to_howto_rela): Likewise. * elf32-moxie.c (moxie_info_to_howto_rela): Likewise. * elf32-msp430.c (msp430_info_to_howto_rela): Likewise. * elf32-mt.c (mt_info_to_howto_rela): Likewise. * elf32-nds32.c (nds32_info_to_howto_rel): Likewise. * elf32-or1k.c (or1k_info_to_howto_rela): Likewise. * elf32-rl78.c (rl78_info_to_howto_rela): Likewise. * elf32-rx.c (rx_info_to_howto_rela): Likewise. * elf32-v850.c (v850_elf_info_to_howto_rel): Likewise. * elf32-visium.c (visium_info_to_howto_rela): Likewise. * elf32-xgate.c (xgate_info_to_howto_rel): Likewise. * elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise. * elf64-mmix.c (mmix_info_to_howto_rela): Likewise. * elf64-x86-64.c (elf_x86_64_reloc_type_lookup): Likewise. * elfnn-aarch64.c (elfNN_aarch64_bfd_reloc_from_type): Likewise. * elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Add range checking of reloc symbol index. * mach-o.c (bfd_mach_o_canonicalize_one_reloc): If no symbols have been provided then set the reloc's symbol to undefined. * reloc.c (bfd_generic_get_relocated_section_contents): Add range checking of the reloc to be applied. * versados.c (process_otr): Add more range checks. (versados_canonicalize_reloc): If the section is unknown, set the symbol to undefined. * vms-alpha.c (_bfd_vms_slurp_eisd): Add range checks. (alpha_vms_object_p): Likewise.
2014-12-22 21:59:00 +01:00
r_type = 0;
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
cache_ptr->howto = elf_msp430x_howto_table + r_type;
return;
}
More fixes for memory access violations exposed by fuzzed binaries. PR binutils/17512 * archive.c (do_slurp_bsd_armap): Return if the parsed_size is zero. (bfd_slurp_armap): Zero terminate the name. (bfd_generic_stat_arch_elt): If there is no header, fail. * elf32-arc.c (arc_info_to_howto_rel): Replace BFD_ASSERT with error message. * elf32-avr.c (avr_info_to_howto_rela): Likewise. * elf32-cr16c.c (elf_cr16c_info_to_howto_rel): Likewise. * elf32-cris.c (cris_info_to_howto_rela): Likewise. * elf32-d10v.c (d10v_info_to_howto_rel): Likewise. * elf32-d30v.c (d30v_info_to_howto_rel): Likewise. * elf32-dlx.c (dlx_rtype_to_howto): Likewise. * elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise. * elf32-fr30.c (fr30_info_to_howto_rela): Likewise. * elf32-frv.c (frv_info_to_howto_rela): Likewise. * elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise. * elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise. * elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise. * elf32-lm32.c (lm32_info_to_howto_rela): Likewise. * elf32-m32c.c (m32c_info_to_howto_rela): Likewise. * elf32-m32r.c (m32r_info_to_howto_rel): Likewise. * elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise. * elf32-mep.c (mep_info_to_howto_rela): Likewise. * elf32-metag.c (metag_info_to_howto_rela): Likewise. * elf32-moxie.c (moxie_info_to_howto_rela): Likewise. * elf32-msp430.c (msp430_info_to_howto_rela): Likewise. * elf32-mt.c (mt_info_to_howto_rela): Likewise. * elf32-nds32.c (nds32_info_to_howto_rel): Likewise. * elf32-or1k.c (or1k_info_to_howto_rela): Likewise. * elf32-rl78.c (rl78_info_to_howto_rela): Likewise. * elf32-rx.c (rx_info_to_howto_rela): Likewise. * elf32-v850.c (v850_elf_info_to_howto_rel): Likewise. * elf32-visium.c (visium_info_to_howto_rela): Likewise. * elf32-xgate.c (xgate_info_to_howto_rel): Likewise. * elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise. * elf64-mmix.c (mmix_info_to_howto_rela): Likewise. * elf64-x86-64.c (elf_x86_64_reloc_type_lookup): Likewise. * elfnn-aarch64.c (elfNN_aarch64_bfd_reloc_from_type): Likewise. * elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Add range checking of reloc symbol index. * mach-o.c (bfd_mach_o_canonicalize_one_reloc): If no symbols have been provided then set the reloc's symbol to undefined. * reloc.c (bfd_generic_get_relocated_section_contents): Add range checking of the reloc to be applied. * versados.c (process_otr): Add more range checks. (versados_canonicalize_reloc): If the section is unknown, set the symbol to undefined. * vms-alpha.c (_bfd_vms_slurp_eisd): Add range checks. (alpha_vms_object_p): Likewise.
2014-12-22 21:59:00 +01:00
if (r_type >= (unsigned int) R_MSP430_max)
{
More fixes for illegal memory accesses triggered by running objdump on fuzzed binaries. PR binutils/17512 * objdump.c (display_any_bfd): Fail if archives nest too deeply. * ecoff.c: Use bfd_alloc2 to allocate space for structure arrays. (_bfd_ecoff_slurp_symbol_table): Check for a negative symbol index or an out of range fdr index. * elf-m10300.c (mn10300_info_to_howto): Fix typo in error message. * elf32-arc.c (arc_info_to_howto_rel): Likewise. * elf32-avr.c (avr_info_to_howto_rela): Likewise. * elf32-cr16.c (elf_cr16_info_to_howto): Likewise. * elf32-cr16c.c (elf_cr16c_info_to_howto_rel): Likewise. * elf32-cris.c (cris_info_to_howto_rela): Likewise. * elf32-crx.c (elf_crx_info_to_howto): Likewise. * elf32-d10v.c (d10v_info_to_howto_rel): Likewise. * elf32-d30v.c (d30v_info_to_howto_rel): Likewise. * elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise. * elf32-fr30.c (fr30_info_to_howto_rela): Likewise. * elf32-frv.c (frv_info_to_howto_rela): Likewise. * elf32-i370.c (i370_elf_info_to_howto): Likewise. * elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise. * elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise. * elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise. * elf32-lm32.c (lm32_info_to_howto_rela): Likewise. * elf32-m32c.c (m32c_info_to_howto_rela): Likewise. * elf32-m32r.c (m32r_info_to_howto_rel): Likewise. * elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise. * elf32-mcore.c (mcore_elf_info_to_howto): Likewise. * elf32-mep.c (mep_info_to_howto_rela): Likewise. * elf32-metag.c (metag_info_to_howto_rela): Likewise. * elf32-microblaze.c (microblaze_elf_info_to_howto): Likewise. * elf32-moxie.c (moxie_info_to_howto_rela): Likewise. * elf32-msp430.c (msp430_info_to_howto_rela): Likewise. * elf32-mt.c (mt_info_to_howto_rela): Likewise. * elf32-nds32.c (nds32_info_to_howto_rel): Likewise. * elf32-or1k.c (or1k_info_to_howto_rela): Likewise. * elf32-pj.c (pj_elf_info_to_howto): Likewise. * elf32-ppc.c (ppc_elf_info_to_howto): Likewise. * elf32-rl78.c (rl78_info_to_howto_rela): Likewise. * elf32-rx.c (rx_info_to_howto_rela): Likewise. * elf32-sh.c (sh_elf_info_to_howto): Likewise. * elf32-spu.c (spu_elf_info_to_howto): Likewise. * elf32-v850.c (v850_elf_perform_relocation): Likewise. * elf32-vax.c (rtype_to_howto): Likewise. * elf32-visium.c (visium_info_to_howto_rela): Likewise. * elf32-xgate.c (xgate_info_to_howto_rel): Likewise. * elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise. * elf64-alpha.c (elf64_alpha_info_to_howto): Likewise. * elf64-mmix.c (mmix_info_to_howto_rela): Likewise. * mach-o.c: Use bfd_alloc2 to allocate space for structure arrays. (bfd_mach_o_canonicalize_one_reloc): Fix check on out of range symbol indicies. (bfd_mach_o_canonicalize_relocs): Check for out of range alloc. (bfd_mach_o_canonicalize_dynamic_reloc): Likewise. (bfd_mach_o_build_dysymtab): Likewise. (bfd_mach_o_write_symtab_content): Set the string table size to zero upon error. (bfd_mach_o_read_symtab_symbols): Reset the nsyms value if the read fails. * peXXigen.c (pe_print_edata): Check for numeric overflow in edt fields. * tekhex.c (first_phase): Check for src pointer reaching end of buffer.
2015-02-03 15:34:54 +01:00
_bfd_error_handler (_("%B: invalid MSP430 reloc number: %d"), abfd, r_type);
More fixes for memory access violations exposed by fuzzed binaries. PR binutils/17512 * archive.c (do_slurp_bsd_armap): Return if the parsed_size is zero. (bfd_slurp_armap): Zero terminate the name. (bfd_generic_stat_arch_elt): If there is no header, fail. * elf32-arc.c (arc_info_to_howto_rel): Replace BFD_ASSERT with error message. * elf32-avr.c (avr_info_to_howto_rela): Likewise. * elf32-cr16c.c (elf_cr16c_info_to_howto_rel): Likewise. * elf32-cris.c (cris_info_to_howto_rela): Likewise. * elf32-d10v.c (d10v_info_to_howto_rel): Likewise. * elf32-d30v.c (d30v_info_to_howto_rel): Likewise. * elf32-dlx.c (dlx_rtype_to_howto): Likewise. * elf32-epiphany.c (epiphany_info_to_howto_rela): Likewise. * elf32-fr30.c (fr30_info_to_howto_rela): Likewise. * elf32-frv.c (frv_info_to_howto_rela): Likewise. * elf32-i960.c (elf32_i960_info_to_howto_rel): Likewise. * elf32-ip2k.c (ip2k_info_to_howto_rela): Likewise. * elf32-iq2000.c (iq2000_info_to_howto_rela): Likewise. * elf32-lm32.c (lm32_info_to_howto_rela): Likewise. * elf32-m32c.c (m32c_info_to_howto_rela): Likewise. * elf32-m32r.c (m32r_info_to_howto_rel): Likewise. * elf32-m68hc11.c (m68hc11_info_to_howto_rel): Likewise. * elf32-m68hc12.c (m68hc11_info_to_howto_rel): Likewise. * elf32-mep.c (mep_info_to_howto_rela): Likewise. * elf32-metag.c (metag_info_to_howto_rela): Likewise. * elf32-moxie.c (moxie_info_to_howto_rela): Likewise. * elf32-msp430.c (msp430_info_to_howto_rela): Likewise. * elf32-mt.c (mt_info_to_howto_rela): Likewise. * elf32-nds32.c (nds32_info_to_howto_rel): Likewise. * elf32-or1k.c (or1k_info_to_howto_rela): Likewise. * elf32-rl78.c (rl78_info_to_howto_rela): Likewise. * elf32-rx.c (rx_info_to_howto_rela): Likewise. * elf32-v850.c (v850_elf_info_to_howto_rel): Likewise. * elf32-visium.c (visium_info_to_howto_rela): Likewise. * elf32-xgate.c (xgate_info_to_howto_rel): Likewise. * elf32-xtensa.c (elf_xtensa_info_to_howto_rela): Likewise. * elf64-mmix.c (mmix_info_to_howto_rela): Likewise. * elf64-x86-64.c (elf_x86_64_reloc_type_lookup): Likewise. * elfnn-aarch64.c (elfNN_aarch64_bfd_reloc_from_type): Likewise. * elf64-sparc.c (elf64_sparc_slurp_one_reloc_table): Add range checking of reloc symbol index. * mach-o.c (bfd_mach_o_canonicalize_one_reloc): If no symbols have been provided then set the reloc's symbol to undefined. * reloc.c (bfd_generic_get_relocated_section_contents): Add range checking of the reloc to be applied. * versados.c (process_otr): Add more range checks. (versados_canonicalize_reloc): If the section is unknown, set the symbol to undefined. * vms-alpha.c (_bfd_vms_slurp_eisd): Add range checks. (alpha_vms_object_p): Likewise.
2014-12-22 21:59:00 +01:00
r_type = 0;
}
2002-12-30 20:25:13 +01:00
cache_ptr->howto = &elf_msp430_howto_table[r_type];
}
/* Look through the relocs for a section during the first phase.
Since we don't do .gots or .plts, we just need to consider the
virtual table relocs for gc. */
static bfd_boolean
elf32_msp430_check_relocs (bfd * abfd, struct bfd_link_info * info,
asection * sec, const Elf_Internal_Rela * relocs)
2002-12-30 20:25:13 +01:00
{
Elf_Internal_Shdr *symtab_hdr;
struct elf_link_hash_entry **sym_hashes;
2002-12-30 20:25:13 +01:00
const Elf_Internal_Rela *rel;
const Elf_Internal_Rela *rel_end;
2003-06-25 08:40:27 +02:00
if (info->relocatable)
2002-12-30 20:25:13 +01:00
return TRUE;
symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
sym_hashes = elf_sym_hashes (abfd);
rel_end = relocs + sec->reloc_count;
for (rel = relocs; rel < rel_end; rel++)
{
struct elf_link_hash_entry *h;
unsigned long r_symndx;
r_symndx = ELF32_R_SYM (rel->r_info);
if (r_symndx < symtab_hdr->sh_info)
h = NULL;
else
2005-06-20 20:12:11 +02:00
{
h = sym_hashes[r_symndx - symtab_hdr->sh_info];
while (h->root.type == bfd_link_hash_indirect
|| h->root.type == bfd_link_hash_warning)
h = (struct elf_link_hash_entry *) h->root.u.i.link;
PR ld/15323 bfd/ * elf-m10300.c (mn10300_elf_check_relocs): Set non_ir_ref for global symbols referenced by relocs. * elf32-arm.c (elf32_arm_check_relocs): Likewise. * elf32-bfin.c (bfin_check_relocs): Likewise. * elf32-cr16.c (cr16_elf_check_relocs): Likewise. * elf32-cris.c (cris_elf_check_relocs): Likewise. * elf32-d10v.c (elf32_d10v_check_relocs): Likewise. * elf32-dlx.c (elf32_dlx_check_relocs): Likewise. * elf32-fr30.c (fr30_elf_check_relocs): Likewise. * elf32-frv.c (elf32_frv_check_relocs): Likewise. * elf32-hppa.c (elf32_hppa_check_relocs): Likewise. * elf32-i370.c (i370_elf_check_relocs): Likewise. * elf32-iq2000.c (iq2000_elf_check_relocs): Likewise. * elf32-lm32.c (lm32_elf_check_relocs): Likewise. * elf32-m32c.c (m32c_elf_check_relocs): Likewise. * elf32-m32r.c (m32r_elf_check_relocs): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_check_relocs): Likewise. * elf32-m68k.c (elf_m68k_check_relocs): Likewise. * elf32-mcore.c (mcore_elf_check_relocs): Likewise. * elf32-metag.c (elf_metag_check_relocs): Likewise. * elf32-microblaze.c (microblaze_elf_check_relocs): Likewise. * elf32-moxie.c (moxie_elf_check_relocs): Likewise. * elf32-msp430.c (elf32_msp430_check_relocs): Likewise. * elf32-mt.c (mt_elf_check_relocs): Likewise. * elf32-nios2.c (nios2_elf32_check_relocs): Likewise. * elf32-openrisc.c (openrisc_elf_check_relocs): Likewise. * elf32-ppc.c (ppc_elf_check_relocs): Likewise. * elf32-rl78.c (rl78_elf_check_relocs): Likewise. * elf32-s390.c (elf_s390_check_relocs): Likewise. * elf32-score.c (s3_bfd_score_elf_check_relocs): Likewise. * elf32-score7.c (s7_bfd_score_elf_check_relocs): Likewise. * elf32-sh.c (sh_elf_check_relocs): Likewise. * elf32-tic6x.c (elf32_tic6x_check_relocs): Likewise. * elf32-tilepro.c (tilepro_elf_check_relocs): Likewise. * elf32-v850.c (v850_elf_check_relocs): Likewise. * elf32-vax.c (elf_vax_check_relocs): Likewise. * elf32-xstormy16.c (xstormy16_elf_check_relocs): Likewise. * elf32-xtensa.c (elf_xtensa_check_relocs): Likewise. * elf64-aarch64.c (elf64_aarch64_check_relocs): Likewise. * elf64-alpha.c (elf64_alpha_check_relocs): Likewise. * elf64-hppa.c (elf64_hppa_check_relocs): Likewise. * elf64-ia64-vms.c (elf64_ia64_check_relocs): Likewise. * elf64-mmix.c (mmix_elf_check_relocs): Likewise. * elf64-ppc.c (ppc64_elf_check_relocs): Likewise. * elf64-s390.c (elf_s390_check_relocs): Likewise. * elf64-sh64.c (sh_elf64_check_relocs): Likewise. * elfnn-ia64.c (elfNN_ia64_check_relocs): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_check_relocs): Likewise. * elfxx-tilegx.c (tilegx_elf_check_relocs): Likewise. * elfxx-mips.c (_bfd_mips_elf_check_relocs): Likewise. Don't test indirect/warning links for NULL. ld/testsuite/ * ld-plugin/lto.exp (pr15323a.c): Compile without -flto rather than using -r to effectively strip out lto info.
2013-03-30 11:14:15 +01:00
/* PR15323, ref flags aren't set for references in the same
object. */
h->root.non_ir_ref = 1;
2005-06-20 20:12:11 +02:00
}
2002-12-30 20:25:13 +01:00
}
return TRUE;
}
/* Perform a single relocation. By default we use the standard BFD
routines, but a few relocs, we have to do them ourselves. */
static bfd_reloc_status_type
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
msp430_final_link_relocate (reloc_howto_type * howto,
bfd * input_bfd,
asection * input_section,
bfd_byte * contents,
Elf_Internal_Rela * rel,
bfd_vma relocation,
struct bfd_link_info * info)
2002-12-30 20:25:13 +01:00
{
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
static asection * sym_diff_section;
static bfd_vma sym_diff_value;
struct bfd_elf_section_data * esd = elf_section_data (input_section);
2002-12-30 20:25:13 +01:00
bfd_reloc_status_type r = bfd_reloc_ok;
bfd_vma x;
bfd_signed_vma srel;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
bfd_boolean is_rel_reloc = FALSE;
if (uses_msp430x_relocs (input_bfd))
{
/* See if we have a REL type relocation. */
is_rel_reloc = (esd->rel.hdr != NULL);
/* Sanity check - only one type of relocation per section.
FIXME: Theoretically it is possible to have both types,
but if that happens how can we distinguish between the two ? */
BFD_ASSERT (! is_rel_reloc || ! esd->rela.hdr);
/* If we are using a REL relocation then the addend should be empty. */
BFD_ASSERT (! is_rel_reloc || rel->r_addend == 0);
}
2002-12-30 20:25:13 +01:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
if (sym_diff_section != NULL)
2002-12-30 20:25:13 +01:00
{
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
BFD_ASSERT (sym_diff_section == input_section);
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
if (uses_msp430x_relocs (input_bfd))
switch (howto->type)
{
case R_MSP430_ABS32:
/* If we are computing a 32-bit value for the location lists
and the result is 0 then we add one to the value. A zero
value can result because of linker relaxation deleteing
prologue instructions and using a value of 1 (for the begin
and end offsets in the location list entry) results in a
nul entry which does not prevent the following entries from
being parsed. */
if (relocation == sym_diff_value
&& strcmp (input_section->name, ".debug_loc") == 0)
++ relocation;
/* Fall through. */
case R_MSP430_ABS16:
case R_MSP430X_ABS16:
case R_MSP430_ABS8:
BFD_ASSERT (! is_rel_reloc);
relocation -= sym_diff_value;
break;
default:
return bfd_reloc_dangerous;
}
else
switch (howto->type)
{
case R_MSP430_32:
case R_MSP430_16:
case R_MSP430_16_BYTE:
case R_MSP430_8:
relocation -= sym_diff_value;
break;
default:
return bfd_reloc_dangerous;
}
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
sym_diff_section = NULL;
}
if (uses_msp430x_relocs (input_bfd))
switch (howto->type)
{
case R_MSP430X_SYM_DIFF:
/* Cache the input section and value.
The offset is unreliable, since relaxation may
have reduced the following reloc's offset. */
BFD_ASSERT (! is_rel_reloc);
sym_diff_section = input_section;
sym_diff_value = relocation;
return bfd_reloc_ok;
case R_MSP430_ABS16:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
srel += bfd_get_16 (input_bfd, contents);
else
srel += rel->r_addend;
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
case R_MSP430X_10_PCREL:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
srel += bfd_get_16 (input_bfd, contents) & 0x3ff;
else
srel += rel->r_addend;
srel -= rel->r_offset;
srel -= 2; /* Branch instructions add 2 to the PC... */
srel -= (input_section->output_section->vma +
input_section->output_offset);
if (srel & 1)
return bfd_reloc_outofrange;
/* MSP430 addresses commands as words. */
srel >>= 1;
/* Check for an overflow. */
if (srel < -512 || srel > 511)
{
if (info->disable_target_specific_optimizations < 0)
{
static bfd_boolean warned = FALSE;
if (! warned)
{
info->callbacks->warning
(info,
_("Try enabling relaxation to avoid relocation truncations"),
NULL, input_bfd, input_section, relocation);
warned = TRUE;
}
}
return bfd_reloc_overflow;
}
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfc00) | (srel & 0x3ff);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430X_PCR20_EXT_ODST:
/* [0,4]+[48,16] = ---F ---- ---- FFFF */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
addend |= bfd_get_16 (input_bfd, contents + 6);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
srel += addend;
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
}
else
srel += rel->r_addend;
srel -= rel->r_offset;
srel -= (input_section->output_section->vma +
input_section->output_offset);
bfd_put_16 (input_bfd, (srel & 0xffff), contents + 6);
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfff0) | ((srel >> 16) & 0xf);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430X_ABS20_EXT_SRC:
/* [7,4]+[32,16] = -78- ---- FFFF */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = (bfd_get_16 (input_bfd, contents) & 0x0780) << 9;
addend |= bfd_get_16 (input_bfd, contents + 4);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
srel += addend;
}
else
srel += rel->r_addend;
bfd_put_16 (input_bfd, (srel & 0xffff), contents + 4);
srel >>= 16;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xf87f) | ((srel << 7) & 0x0780);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430_16_PCREL:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
srel += bfd_get_16 (input_bfd, contents);
else
srel += rel->r_addend;
srel -= rel->r_offset;
/* Only branch instructions add 2 to the PC... */
srel -= (input_section->output_section->vma +
input_section->output_offset);
if (srel & 1)
return bfd_reloc_outofrange;
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
case R_MSP430X_PCR20_EXT_DST:
/* [0,4]+[32,16] = ---F ---- FFFF */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
addend |= bfd_get_16 (input_bfd, contents + 4);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
srel += addend;
}
else
srel += rel->r_addend;
srel -= rel->r_offset;
srel -= (input_section->output_section->vma +
input_section->output_offset);
bfd_put_16 (input_bfd, (srel & 0xffff), contents + 4);
srel >>= 16;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfff0) | (srel & 0xf);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430X_PCR20_EXT_SRC:
/* [7,4]+[32,16] = -78- ---- FFFF */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = ((bfd_get_16 (input_bfd, contents) & 0x0780) << 9);
addend |= bfd_get_16 (input_bfd, contents + 4);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
srel += addend;;
}
else
srel += rel->r_addend;
srel -= rel->r_offset;
/* Only branch instructions add 2 to the PC... */
srel -= (input_section->output_section->vma +
input_section->output_offset);
bfd_put_16 (input_bfd, (srel & 0xffff), contents + 4);
srel >>= 16;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xf87f) | ((srel << 7) & 0x0780);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430_ABS8:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
srel += bfd_get_8 (input_bfd, contents);
else
srel += rel->r_addend;
bfd_put_8 (input_bfd, srel & 0xff, contents);
break;
case R_MSP430X_ABS20_EXT_DST:
/* [0,4]+[32,16] = ---F ---- FFFF */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
addend |= bfd_get_16 (input_bfd, contents + 4);
srel += addend;
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
else
srel += rel->r_addend;
bfd_put_16 (input_bfd, (srel & 0xffff), contents + 4);
srel >>= 16;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfff0) | (srel & 0xf);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430X_ABS20_EXT_ODST:
/* [0,4]+[48,16] = ---F ---- ---- FFFF */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
addend |= bfd_get_16 (input_bfd, contents + 6);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
srel += addend;
}
else
srel += rel->r_addend;
bfd_put_16 (input_bfd, (srel & 0xffff), contents + 6);
srel >>= 16;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfff0) | (srel & 0xf);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430X_ABS20_ADR_SRC:
/* [8,4]+[16,16] = -F-- FFFF */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = ((bfd_get_16 (input_bfd, contents) & 0xf00) << 8);
addend |= bfd_get_16 (input_bfd, contents + 2);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
srel += addend;
}
else
srel += rel->r_addend;
bfd_put_16 (input_bfd, (srel & 0xffff), contents + 2);
srel >>= 16;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xf0ff) | ((srel << 8) & 0x0f00);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430X_ABS20_ADR_DST:
/* [0,4]+[16,16] = ---F FFFF */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = ((bfd_get_16 (input_bfd, contents) & 0xf) << 16);
addend |= bfd_get_16 (input_bfd, contents + 2);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
srel += addend;
}
else
srel += rel->r_addend;
bfd_put_16 (input_bfd, (srel & 0xffff), contents + 2);
srel >>= 16;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfff0) | (srel & 0xf);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430X_ABS16:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
srel += bfd_get_16 (input_bfd, contents);
else
srel += rel->r_addend;
x = srel;
if (x > 0xffff)
2015-08-12 13:32:43 +02:00
return bfd_reloc_overflow;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
case R_MSP430_ABS_HI16:
/* The EABI specifies that this must be a RELA reloc. */
BFD_ASSERT (! is_rel_reloc);
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
bfd_put_16 (input_bfd, (srel >> 16) & 0xffff, contents);
break;
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
case R_MSP430X_PCR20_CALL:
/* [0,4]+[16,16] = ---F FFFF*/
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
{
bfd_vma addend;
addend = (bfd_get_16 (input_bfd, contents) & 0xf) << 16;
addend |= bfd_get_16 (input_bfd, contents + 2);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
srel += addend;
}
else
srel += rel->r_addend;
srel -= rel->r_offset;
srel -= (input_section->output_section->vma +
input_section->output_offset);
bfd_put_16 (input_bfd, srel & 0xffff, contents + 2);
srel >>= 16;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfff0) | (srel & 0xf);
bfd_put_16 (input_bfd, x, contents);
break;
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
case R_MSP430X_PCR16:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
srel += bfd_get_16 (input_bfd, contents);
else
srel += rel->r_addend;
srel -= rel->r_offset;
srel -= (input_section->output_section->vma +
input_section->output_offset);
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
case R_MSP430_PREL31:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
if (is_rel_reloc)
srel += (bfd_get_32 (input_bfd, contents) & 0x7fffffff);
else
srel += rel->r_addend;
srel += rel->r_addend;
x = bfd_get_32 (input_bfd, contents);
x = (x & 0x80000000) | ((srel >> 31) & 0x7fffffff);
bfd_put_32 (input_bfd, x, contents);
break;
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
default:
r = _bfd_final_link_relocate (howto, input_bfd, input_section,
contents, rel->r_offset,
relocation, rel->r_addend);
}
else
switch (howto->type)
{
2002-12-30 20:25:13 +01:00
case R_MSP430_10_PCREL:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
srel -= rel->r_offset;
srel -= 2; /* Branch instructions add 2 to the PC... */
srel -= (input_section->output_section->vma +
input_section->output_offset);
if (srel & 1)
return bfd_reloc_outofrange;
/* MSP430 addresses commands as words. */
srel >>= 1;
/* Check for an overflow. */
if (srel < -512 || srel > 511)
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
{
if (info->disable_target_specific_optimizations < 0)
{
static bfd_boolean warned = FALSE;
if (! warned)
{
info->callbacks->warning
(info,
_("Try enabling relaxation to avoid relocation truncations"),
NULL, input_bfd, input_section, relocation);
warned = TRUE;
}
}
return bfd_reloc_overflow;
}
2015-08-12 13:32:43 +02:00
2002-12-30 20:25:13 +01:00
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfc00) | (srel & 0x3ff);
bfd_put_16 (input_bfd, x, contents);
break;
case R_MSP430_2X_PCREL:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
srel -= rel->r_offset;
srel -= 2; /* Branch instructions add 2 to the PC... */
srel -= (input_section->output_section->vma +
input_section->output_offset);
if (srel & 1)
return bfd_reloc_outofrange;
/* MSP430 addresses commands as words. */
srel >>= 1;
/* Check for an overflow. */
if (srel < -512 || srel > 511)
return bfd_reloc_overflow;
x = bfd_get_16 (input_bfd, contents);
x = (x & 0xfc00) | (srel & 0x3ff);
bfd_put_16 (input_bfd, x, contents);
/* Handle second jump instruction. */
x = bfd_get_16 (input_bfd, contents - 2);
srel += 1;
x = (x & 0xfc00) | (srel & 0x3ff);
bfd_put_16 (input_bfd, x, contents - 2);
break;
case R_MSP430_RL_PCREL:
2013-01-15 09:35:39 +01:00
case R_MSP430_16_PCREL:
2002-12-30 20:25:13 +01:00
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
srel -= rel->r_offset;
/* Only branch instructions add 2 to the PC... */
srel -= (input_section->output_section->vma +
input_section->output_offset);
if (srel & 1)
return bfd_reloc_outofrange;
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
case R_MSP430_16_PCREL_BYTE:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
srel -= rel->r_offset;
/* Only branch instructions add 2 to the PC... */
srel -= (input_section->output_section->vma +
input_section->output_offset);
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
case R_MSP430_16_BYTE:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
case R_MSP430_16:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
if (srel & 1)
return bfd_reloc_notsupported;
bfd_put_16 (input_bfd, srel & 0xffff, contents);
break;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
case R_MSP430_8:
contents += rel->r_offset;
srel = (bfd_signed_vma) relocation;
srel += rel->r_addend;
bfd_put_8 (input_bfd, srel & 0xff, contents);
break;
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
case R_MSP430_SYM_DIFF:
/* Cache the input section and value.
The offset is unreliable, since relaxation may
have reduced the following reloc's offset. */
sym_diff_section = input_section;
sym_diff_value = relocation;
return bfd_reloc_ok;
default:
r = _bfd_final_link_relocate (howto, input_bfd, input_section,
contents, rel->r_offset,
relocation, rel->r_addend);
}
2002-12-30 20:25:13 +01:00
return r;
}
/* Relocate an MSP430 ELF section. */
static bfd_boolean
elf32_msp430_relocate_section (bfd * output_bfd ATTRIBUTE_UNUSED,
struct bfd_link_info * info,
bfd * input_bfd,
asection * input_section,
bfd_byte * contents,
Elf_Internal_Rela * relocs,
Elf_Internal_Sym * local_syms,
asection ** local_sections)
2002-12-30 20:25:13 +01:00
{
Elf_Internal_Shdr *symtab_hdr;
struct elf_link_hash_entry **sym_hashes;
Elf_Internal_Rela *rel;
Elf_Internal_Rela *relend;
symtab_hdr = &elf_tdata (input_bfd)->symtab_hdr;
sym_hashes = elf_sym_hashes (input_bfd);
relend = relocs + input_section->reloc_count;
for (rel = relocs; rel < relend; rel++)
{
reloc_howto_type *howto;
unsigned long r_symndx;
Elf_Internal_Sym *sym;
asection *sec;
struct elf_link_hash_entry *h;
bfd_vma relocation;
bfd_reloc_status_type r;
const char *name = NULL;
int r_type;
r_type = ELF32_R_TYPE (rel->r_info);
r_symndx = ELF32_R_SYM (rel->r_info);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
if (uses_msp430x_relocs (input_bfd))
howto = elf_msp430x_howto_table + r_type;
else
howto = elf_msp430_howto_table + r_type;
2002-12-30 20:25:13 +01:00
h = NULL;
sym = NULL;
sec = NULL;
if (r_symndx < symtab_hdr->sh_info)
{
sym = local_syms + r_symndx;
sec = local_sections[r_symndx];
* elf.c (_bfd_elf_rela_local_sym): Accept asection **, and return updated section in case of merged section. * elf-bfd.h (_bfd_elf_rela_local_sym): Update declaration. * elf-hppa.h (elf_hppa_relocate_section): Adjust call. * elf-m10200.c (mn10200_elf_relocate_section): Likewise. * elf-m10300.c (mn10300_elf_relocate_section): Likewise. * elf32-arm.h (elf32_arm_relocate_section): Likewise. * elf32-avr.c (elf32_avr_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Likewise. * elf32-fr30.c (fr30_elf_relocate_section): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-h8300.c (elf32_h8_relocate_section): Likewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. * elf32-i370.c (i370_elf_relocate_section): Likewise. * elf32-i860.c (elf32_i860_relocate_section): Likewise. * elf32-m32r.c (m32r_elf_relocate_section): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-mcore.c (mcore_elf_relocate_section): Likewise. * elf32-msp430.c (elf32_msp430_relocate_section): Likewise. * elf32-openrisc.c (openrisc_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-s390.c (elf_s390_relocate_section): Likewise. * elf32-sh.c (sh_elf_relocate_section): Likewise. * elf32-sparc.c (elf32_sparc_relocate_section): Likewise. * elf32-v850.c (v850_elf_relocate_section) Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise. * elf32-xtensa.c (elf_xtensa_relocate_section): Likewise. * elf64-alpha.c (elf64_alpha_relocate_section): Likewise. * elf64-mmix.c (mmix_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-s390.c (elf_s390_relocate_section): Likewise. * elf64-sh64.c (sh_elf64_relocate_section): Likewise. * elf64-sparc.c (sparc64_elf_relocate_section): Likewise. * elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise. * elfxx-ia64.c (elfNN_ia64_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Don't recalculate symbol section for reloc output. * elf32-i370.c (i370_elf_relocate_section): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-sparc.c (elf32_sparc_relocate_section): Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf64-sparc.c (sparc64_elf_relocate_section): Likewise. * elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Don't recalculate everything for R_PPC_RELAX32 reloc. Don't bother checking ppc_elf_install_value return value. * elf64-ppc.c (ppc64_elf_relocate_section <R_PPC64_TOC>): Sanity check sec->id.
2003-11-05 14:17:09 +01:00
relocation = _bfd_elf_rela_local_sym (output_bfd, sym, &sec, rel);
2002-12-30 20:25:13 +01:00
name = bfd_elf_string_from_elf_section
(input_bfd, symtab_hdr->sh_link, sym->st_name);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
name = (name == NULL || * name == 0) ? bfd_section_name (input_bfd, sec) : name;
2002-12-30 20:25:13 +01:00
}
else
{
Pass ignored unresolved relocations to ld backend bfd/ PR ld/4409 * elf-bfd.h (RELOC_FOR_GLOBAL_SYMBOL): Add an argument for error ignored. * elf-m10200.c (mn10200_elf_relocate_section): Updated. * elf-m10300.c (mn10300_elf_relocate_section): Likewise. * elf32-arm.c (elf32_arm_relocate_section): Likewise. * elf32-avr.c (elf32_avr_relocate_section): Likewise. * elf32-bfin.c (bfinfdpic_relocate_section): Likewise. (bfin_relocate_section): Likewise. * elf32-cr16.c (elf32_cr16_relocate_section): Likewise. * elf32-cr16c.c (elf32_cr16c_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Likewise. * elf32-crx.c (elf32_crx_relocate_section): Likewise. * elf32-d10v.c (elf32_d10v_relocate_section): Likewise. * elf32-epiphany.c (epiphany_elf_relocate_section): Likewise. * elf32-fr30.c (fr30_elf_relocate_section): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-h8300.c (elf32_h8_relocate_section): Likewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-i860.c (elf32_i860_relocate_section): Likewise. * elf32-ip2k.c (ip2k_elf_relocate_section): Likewise. * elf32-iq2000.c (iq2000_elf_relocate_section): Likewise. * elf32-lm32.c (lm32_elf_relocate_section): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-metag.c (elf_metag_relocate_section): Likewise. * elf32-microblaze.c (microblaze_elf_relocate_section): Likewise. * elf32-mcore.c (mcore_elf_relocate_section): Likewise. * elf32-mep.c (mep_elf_relocate_section): Likewise. * elf32-moxie.c (moxie_elf_relocate_section): Likewise. * elf32-msp430.c (elf32_msp430_relocate_section): Likewise. * elf32-mt.c (mt_elf_relocate_section): Likewise. * elf32-nios2.c (nios2_elf32_relocate_section): Likewise. * elf32-openrisc.c (openrisc_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-rl78.c (rl78_elf_relocate_section): Likewise. * elf32-rx.c (rx_elf_relocate_section): Likewise. * elf32-tic6x.c (elf32_tic6x_relocate_section): Likewise. * elf32-tilepro.c (tilepro_elf_relocate_section): Likewise. * elf32-s390.c (elf_s390_relocate_section): Likewise. * elf32-v850.c (v850_elf_relocate_section): Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf32-xc16x.c (elf32_xc16x_relocate_section): Likewise. * elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise. * elf32-xtensa.c (elf_xtensa_relocate_section): Likewise. * elf64-alpha.c (elf64_alpha_relocate_section): Likewise. * elf64-ia64-vms.c (elf64_ia64_relocate_section): Likewise. * elf64-mmix.c (mmix_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-s390.c (elf_s390_relocate_section): Likewise. * elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise. * elfxx-tilegx.c (tilegx_elf_relocate_section): Likewise. * elfnn-aarch64.c (elfNN_aarch64_relocate_section): Likewise. * elfnn-ia64.c (elfNN_ia64_relocate_section): Skip if error from RELOC_FOR_GLOBAL_SYMBOL in executable is ignored. ld/testsuite/ PR ld/4409 * ld-ia64/error1.d: New file. * ld-ia64/error1.s: Likewise. * ld-ia64/error2.d: Likewise. * ld-ia64/error3.d: Likewise.
2013-11-05 19:29:44 +01:00
bfd_boolean unresolved_reloc, warned, ignored;
2002-12-30 20:25:13 +01:00
RELOC_FOR_GLOBAL_SYMBOL (info, input_bfd, input_section, rel,
r_symndx, symtab_hdr, sym_hashes,
h, sec, relocation,
Pass ignored unresolved relocations to ld backend bfd/ PR ld/4409 * elf-bfd.h (RELOC_FOR_GLOBAL_SYMBOL): Add an argument for error ignored. * elf-m10200.c (mn10200_elf_relocate_section): Updated. * elf-m10300.c (mn10300_elf_relocate_section): Likewise. * elf32-arm.c (elf32_arm_relocate_section): Likewise. * elf32-avr.c (elf32_avr_relocate_section): Likewise. * elf32-bfin.c (bfinfdpic_relocate_section): Likewise. (bfin_relocate_section): Likewise. * elf32-cr16.c (elf32_cr16_relocate_section): Likewise. * elf32-cr16c.c (elf32_cr16c_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Likewise. * elf32-crx.c (elf32_crx_relocate_section): Likewise. * elf32-d10v.c (elf32_d10v_relocate_section): Likewise. * elf32-epiphany.c (epiphany_elf_relocate_section): Likewise. * elf32-fr30.c (fr30_elf_relocate_section): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-h8300.c (elf32_h8_relocate_section): Likewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-i860.c (elf32_i860_relocate_section): Likewise. * elf32-ip2k.c (ip2k_elf_relocate_section): Likewise. * elf32-iq2000.c (iq2000_elf_relocate_section): Likewise. * elf32-lm32.c (lm32_elf_relocate_section): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-metag.c (elf_metag_relocate_section): Likewise. * elf32-microblaze.c (microblaze_elf_relocate_section): Likewise. * elf32-mcore.c (mcore_elf_relocate_section): Likewise. * elf32-mep.c (mep_elf_relocate_section): Likewise. * elf32-moxie.c (moxie_elf_relocate_section): Likewise. * elf32-msp430.c (elf32_msp430_relocate_section): Likewise. * elf32-mt.c (mt_elf_relocate_section): Likewise. * elf32-nios2.c (nios2_elf32_relocate_section): Likewise. * elf32-openrisc.c (openrisc_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-rl78.c (rl78_elf_relocate_section): Likewise. * elf32-rx.c (rx_elf_relocate_section): Likewise. * elf32-tic6x.c (elf32_tic6x_relocate_section): Likewise. * elf32-tilepro.c (tilepro_elf_relocate_section): Likewise. * elf32-s390.c (elf_s390_relocate_section): Likewise. * elf32-v850.c (v850_elf_relocate_section): Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf32-xc16x.c (elf32_xc16x_relocate_section): Likewise. * elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise. * elf32-xtensa.c (elf_xtensa_relocate_section): Likewise. * elf64-alpha.c (elf64_alpha_relocate_section): Likewise. * elf64-ia64-vms.c (elf64_ia64_relocate_section): Likewise. * elf64-mmix.c (mmix_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-s390.c (elf_s390_relocate_section): Likewise. * elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise. * elfxx-tilegx.c (tilegx_elf_relocate_section): Likewise. * elfnn-aarch64.c (elfNN_aarch64_relocate_section): Likewise. * elfnn-ia64.c (elfNN_ia64_relocate_section): Skip if error from RELOC_FOR_GLOBAL_SYMBOL in executable is ignored. ld/testsuite/ PR ld/4409 * ld-ia64/error1.d: New file. * ld-ia64/error1.s: Likewise. * ld-ia64/error2.d: Likewise. * ld-ia64/error3.d: Likewise.
2013-11-05 19:29:44 +01:00
unresolved_reloc, warned, ignored);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
name = h->root.root.string;
2002-12-30 20:25:13 +01:00
}
PR ld/13991 bfd/ * bfd/elf-bfd.h (_bfd_elf_link_just_syms): Define as _bfd_generic_link_just_syms. * bfd/elflink.c (_bfd_elf_link_just_syms): Delete. * bfd/linker.c (_bfd_generic_link_just_syms): Set sec_info_type. * bfd/bfd-in.h (discarded_section): Renamed from elf_discarded_section. * bfd/section.c (SEC_INFO_TYPE_NONE, SEC_INFO_TYPE_STABS, SEC_INFO_TYPE_MERGE, SEC_INFO_TYPE_EH_FRAME, SEC_INFO_TYPE_JUST_SYMS): Renamed from corresponding ELF_INFO_TYPE. * bfd/elf-eh-frame.c, * bfd/elf-m10200.c, * bfd/elf-m10300.c, * bfd/elf.c, * bfd/elf32-arm.c, * bfd/elf32-avr.c, * bfd/elf32-bfin.c, * bfd/elf32-cr16.c, * bfd/elf32-cr16c.c, * bfd/elf32-cris.c, * bfd/elf32-crx.c, * bfd/elf32-d10v.c, * bfd/elf32-epiphany.c, * bfd/elf32-fr30.c, * bfd/elf32-frv.c, * bfd/elf32-h8300.c, * bfd/elf32-hppa.c, * bfd/elf32-i370.c, * bfd/elf32-i386.c, * bfd/elf32-i860.c, * bfd/elf32-ip2k.c, * bfd/elf32-iq2000.c, * bfd/elf32-lm32.c, * bfd/elf32-m32c.c, * bfd/elf32-m32r.c, * bfd/elf32-m68hc1x.c, * bfd/elf32-m68k.c, * bfd/elf32-mcore.c, * bfd/elf32-mep.c, * bfd/elf32-moxie.c, * bfd/elf32-msp430.c, * bfd/elf32-mt.c, * bfd/elf32-openrisc.c, * bfd/elf32-ppc.c, * bfd/elf32-rl78.c, * bfd/elf32-rx.c, * bfd/elf32-s390.c, * bfd/elf32-score.c, * bfd/elf32-score7.c, * bfd/elf32-sh.c, * bfd/elf32-spu.c, * bfd/elf32-tic6x.c, * bfd/elf32-tilepro.c, * bfd/elf32-v850.c, * bfd/elf32-vax.c, * bfd/elf32-xc16x.c, * bfd/elf32-xstormy16.c, * bfd/elf32-xtensa.c, * bfd/elf64-alpha.c, * bfd/elf64-hppa.c, * bfd/elf64-ia64-vms.c, * bfd/elf64-mmix.c, * bfd/elf64-ppc.c, * bfd/elf64-s390.c, * bfd/elf64-sh64.c, * bfd/elf64-x86-64.c, * bfd/elflink.c, * bfd/elfnn-ia64.c, * bfd/elfxx-mips.c, * bfd/elfxx-sparc.c, * bfd/elfxx-tilegx.c, * bfd/reloc.c: Update all references. * bfd/bfd-in2.h: Regenerate. ld/ * ld/ldlang.c (size_input_section): Use sec_info_type rather than usrdata->flags.just_syms. * ld/ldwrite.c (build_link_order): Likewise. * ld/emultempl/hppaelf.em (build_section_lists): Likewise. * ld/emultempl/ppc64elf.em (build_toc_list): Likewise. * ld/emultempl/armelf.em (build_section_lists): Likewise. (after_allocation): Update for renamed sec_info_type value. * ld/emultempl/tic6xdsbt.em: Likewise.
2012-04-24 07:12:40 +02:00
if (sec != NULL && discarded_section (sec))
bfd/ * elf-bfd.h (RELOC_AGAINST_DISCARDED_SECTION): Always call _bfd_clear_contents. Pass it the input section. * libbfd-in.h (_bfd_clear_contents): Add input_section argument. * libbfd.h: Regenerate. * reloc.c (_bfd_clear_contents): Take input_section argument. Use non-zero for .debug_ranges. (bfd_generic_get_relocated_section_conten): Update _bfd_clear_contents call. * elf32-arm.c (elf32_arm_relocate_section): Use RELOC_AGAINST_DISCARDED_SECTION. * elf-m10200.c (mn10200_elf_relocate_section): Likewise. * elf-m10300.c (mn10300_elf_relocate_section): Likewise. * elf32-arm.c (elf32_arm_relocate_section): Likewise. * elf32-avr.c (elf32_avr_relocate_section): Likewise. * elf32-bfin.c (bfin_relocate_section): Likewise. (bfinfdpic_relocate_section): Likewise. * elf32-cr16.c (elf32_cr16_relocate_section): Likewise. * elf32-cr16c.c (elf32_cr16c_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Likewise. * elf32-crx.c (elf32_crx_relocate_section): Likewise. * elf32-d10v.c (elf32_d10v_relocate_section): Likewise. * elf32-fr30.c (fr30_elf_relocate_section): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-h8300.c (elf32_h8_relocate_section): Likewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. * elf32-i370.c (i370_elf_relocate_section): Likewise. * elf32-i860.c (elf32_i860_relocate_section): Likewise. * elf32-ip2k.c (ip2k_elf_relocate_section): Likewise. * elf32-iq2000.c (iq2000_elf_relocate_section): Likewise. * elf32-lm32.c (lm32_elf_relocate_section): Likewise. * elf32-m32c.c (m32c_elf_relocate_section): Likewise. * elf32-m32r.c (m32r_elf_relocate_section): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-mcore.c (mcore_elf_relocate_section): Likewise. * elf32-mep.c (mep_elf_relocate_section): Likewise. * elf32-moxie.c (moxie_elf_relocate_section): Likewise. * elf32-msp430.c (elf32_msp430_relocate_section): Likewise. * elf32-mt.c (mt_elf_relocate_section): Likewise. * elf32-openrisc.c (openrisc_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-rx.c (rx_elf_relocate_section): Likewise. * elf32-s390.c (elf_s390_relocate_section): Likewise. * elf32-score.c (s3_bfd_score_elf_relocate_section): Likewise. * elf32-score7.c (s7_bfd_score_elf_relocate_section): Likewise. * elf32-sh.c (sh_elf_relocate_section): Likewise. * elf32-spu.c (spu_elf_relocate_section): Likewise. * elf32-tic6x.c (elf32_tic6x_relocate_section): Likewise. * elf32-v850.c (v850_elf_relocate_section): Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf32-xc16x.c (elf32_xc16x_relocate_section): Likewise. * elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise. * elf32-xtensa.c (elf_xtensa_relocate_section): Likewise. * elf64-alpha.c (elf64_alpha_relocate_section_r): Likewise. (elf64_alpha_relocate_section): Likewise. * elf64-hppa.c (elf64_hppa_relocate_section): Likewise. * elf64-mmix.c (mmix_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-s390.c (elf_s390_relocate_section): Likewise. * elf64-sh64.c (sh_elf64_relocate_section): Likewise. * elfxx-ia64.c (elfNN_ia64_relocate_section): Likewise. * elfxx-mips.c (_bfd_mips_elf_relocate_section): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise. ld/testsuite/ * ld-discard/zero-range.d, ld-discard/zero-range.s: New files.
2010-10-25 17:54:16 +02:00
RELOC_AGAINST_DISCARDED_SECTION (info, input_bfd, input_section,
* elf-bfd.h (RELOC_AGAINST_DISCARDED_SECTION): Handle compound relocations. * elfxx-mips.c (mips_reloc_against_discarded_section): New function. (_bfd_mips_elf_relocate_section): Call it, in place of RELOC_AGAINST_DISCARDED_SECTION. * elf-m10200.c (mn10200_elf_relocate_section): Update arguments to RELOC_AGAINST_DISCARDED_SECTION. * elf-m10300.c (mn10300_elf_relocate_section): Likewise. * elf32-arm.c (elf32_arm_relocate_section): Likewise. * elf32-avr.c (elf32_avr_relocate_section): Likewise. * elf32-bfin.c (bfin_relocate_section): Likewise. (bfinfdpic_relocate_section): Likewise. * elf32-cr16.c (elf32_cr16_relocate_section): Likewise. * elf32-cr16c.c (elf32_cr16c_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Likewise. * elf32-crx.c (elf32_crx_relocate_section): Likewise. * elf32-d10v.c (elf32_d10v_relocate_section): Likewise. * elf32-epiphany.c (epiphany_elf_relocate_section): Likewise. * elf32-fr30.c (fr30_elf_relocate_section): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-h8300.c (elf32_h8_relocate_section): Likewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. * elf32-i370.c (i370_elf_relocate_section): Likewise. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-i860.c (elf32_i860_relocate_section): Likewise. * elf32-ip2k.c (ip2k_elf_relocate_section): Likewise. * elf32-iq2000.c (iq2000_elf_relocate_section): Likewise. * elf32-lm32.c (lm32_elf_relocate_section): Likewise. * elf32-m32c.c (m32c_elf_relocate_section): Likewise. * elf32-m32r.c (m32r_elf_relocate_section): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-mcore.c (mcore_elf_relocate_section): Likewise. * elf32-mep.c (mep_elf_relocate_section): Likewise. * elf32-moxie.c (moxie_elf_relocate_section): Likewise. * elf32-msp430.c (elf32_msp430_relocate_section): Likewise. * elf32-mt.c (mt_elf_relocate_section): Likewise. * elf32-openrisc.c (openrisc_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-rl78.c (rl78_elf_relocate_section): Likewise. * elf32-rx.c (rx_elf_relocate_section): Likewise. * elf32-s390.c (elf_s390_relocate_section): Likewise. * elf32-score.c (s3_bfd_score_elf_relocate_section): Likewise. * elf32-score7.c (s7_bfd_score_elf_relocate_section): Likewise. * elf32-sh.c (sh_elf_relocate_section): Likewise. * elf32-spu.c (spu_elf_relocate_section): Likewise. * elf32-tic6x.c (elf32_tic6x_relocate_section): Likewise. * elf32-tilepro.c (tilepro_elf_relocate_section): Likewise. * elf32-v850.c (v850_elf_relocate_section): Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf32-xc16x.c (elf32_xc16x_relocate_section): Likewise. * elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise. * elf32-xtensa.c (elf_xtensa_relocate_section): Likewise. * elf64-alpha.c (elf64_alpha_relocate_section_r): Likewise. (elf64_alpha_relocate_section): Likewise. * elf64-hppa.c (elf64_hppa_relocate_section): Likewise. * elf64-mmix.c (mmix_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-s390.c (elf_s390_relocate_section): Likewise. * elf64-sh64.c (sh_elf64_relocate_section): Likewise. * elf64-x86-64.c (elf_x86_64_relocate_section): Likewise. * elfnn-ia64.c (elfNN_ia64_relocate_section): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise. * elfxx-tilegx.c (tilegx_elf_relocate_section): Likewise.
2012-05-07 05:27:52 +02:00
rel, 1, relend, howto, 0, contents);
PR 3958 bfd/ * elf-bfd.h (RELOC_FOR_GLOBAL_SYMBOL): No error on relocatable link. (elf_discarded_section): Move.. * bfd-in.h: ..to here. * bfd-in2.h: Regenerate. * elflink.c (elf_link_input_bfd): Don't zap relocs against symbols from discarded sections before relocate_section has done its job. * reloc.c (bfd_generic_get_relocated_section_contents): Handle relocs against symbols from discarded sections. * elf-hppa.h (elf_hppa_howto_table): Set size. Set dst_mask on SECREL32. (elf_hppa_relocate_section): Handle relocatable link after setting sec, sym, h etc. for final link. Squash error messages for relocatable link. Clear section contents for relocs against symbols in discarded sections, and zero reloc. Remove existing zero r_symndx code. * elf-m10200.c (mn10200_elf_relocate_section): Likewise. * elf-m10300.c (mn10300_elf_relocate_section): Likewise. * elf32-arm.c (elf32_arm_relocate_section): Likewise. * elf32-avr.c (elf32_avr_relocate_section): Likewise. * elf32-bfin.c (bfinfdpic_relocate_section): Likewise. (bfin_relocate_section): Likewise. * elf32-cr16c.c (elf32_cr16c_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Likewise. * elf32-crx.c (elf32_crx_relocate_section): Likewise. * elf32-d10v.c (elf32_d10v_relocate_section): Likewise. * elf32-fr30.c (fr30_elf_relocate_section): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-h8300.c (elf32_h8_relocate_section): Likewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. * elf32-i370.c (i370_elf_relocate_section): Likewise. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-i860.c (elf32_i860_relocate_section): Likewise. * elf32-ip2k.c (ip2k_elf_relocate_section): Likewise. * elf32-iq2000.c (iq2000_elf_relocate_section): Likewise. * elf32-m32c.c (m32c_elf_relocate_section): Likewise. * elf32-m32r.c (m32r_elf_relocate_section): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_check_relocs): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-mcore.c (mcore_elf_relocate_section): Likewise. * elf32-mep.c (mep_elf_relocate_section): Likewise. * elf32-msp430.c (elf32_msp430_relocate_section): Likewise. * elf32-mt.c (mt_elf_relocate_section): Likewise. * elf32-openrisc.c (openrisc_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-s390.c (elf_s390_relocate_section): Likewise. * elf32-score.c (_bfd_score_elf_relocate_section): Likewise. * elf32-sh.c (sh_elf_relocate_section): Likewise. * elf32-spu.c (spu_elf_relocate_section): Likewise. * elf32-v850.c (v850_elf_relocate_section): Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf32-xc16x.c (elf32_xc16x_relocate_section): Likewise. * elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise. * elf32-xtensa.c (elf_xtensa_relocate_section): Likewise. * elf64-alpha.c (elf64_alpha_relocate_section_r): Likewise. (elf64_alpha_relocate_section): Likewise. * elf64-mmix.c (mmix_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-s390.c (elf_s390_relocate_section): Likewise. * elf64-sh64.c (sh_elf64_relocate_section): Likewise. * elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise. * elfxx-ia64.c (elfNN_ia64_relocate_section): Likewise. * elfxx-mips.c (_bfd_mips_elf_relocate_section): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise. * elf32-arm.c (elf32_arm_relocate_section): Always adjust section symbols for relocatable link. Don't use always-zero st_value. (elf_backend_rela_normal): Don't define. * elf32-bfin.c (bfinfdpic_relocate_section): Use RELOC_FOR_GLOBAL_SYMBOL. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-d10v.c (elf32_d10v_relocate_section): Combine SEC_MERGE section symbol adjustments with same for relocatable link. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-m68hc1x.c (m68hc11_get_relocation_value): Move.. (elf32_m68hc11_check_relocs): ..to here. * elf32-score.c (score_elf_final_link_relocate): Remove zero r_symndx code. * elfxx-mips.c (mips_elf_calculate_relocation): Likewise. ld/testsuite/ * ld-elf/linkonce1.d: New. * ld-elf/linkonce1a.s: New. * ld-elf/linkonce1b.s: New. * ld-elf/linkonce2.d: New. * ld-i386/pcrel16abs.d: New. * ld-i386/pcrel16abs.s: New. * ld-i386/i386.exp: Run it.
2007-03-07 09:54:35 +01:00
if (info->relocatable)
continue;
2002-12-30 20:25:13 +01:00
r = msp430_final_link_relocate (howto, input_bfd, input_section,
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents, rel, relocation, info);
2002-12-30 20:25:13 +01:00
if (r != bfd_reloc_ok)
{
const char *msg = (const char *) NULL;
switch (r)
{
case bfd_reloc_overflow:
r = info->callbacks->reloc_overflow
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
(info, (h ? &h->root : NULL), name, howto->name,
bfd/ 2004-10-21 H.J. Lu <hongjiu.lu@intel.com> PR 463 * aoutx.h (aout_link_input_section_std): Pass proper hash entry to linker reloc_overflow callback. (aout_link_input_section_ext): Likewise. (aout_link_reloc_link_order): Likewise. * coff-a29k.c (coff_a29k_relocate_section): Likewise. * coff-alpha.c (alpha_ecoff_get_relocated_section_contents): Likewise. (alpha_relocate_section): Likewise. * coff-arm.c (coff_arm_relocate_section): Likewise. * coff-h8300.c (h8300_reloc16_extra_cases): Likewise. * coff-h8500.c (extra_case): Likewise. * coff-i960.c (coff_i960_relocate_section): Likewise. * coff-mcore.c (coff_mcore_relocate_section): Likewise. * coff-mips.c (mips_relocate_section): Likewise. * coff-or32.c (coff_or32_relocate_section): Likewise. * coff-ppc.c (coff_ppc_relocate_section): Likewise. * coff-rs6000.c (xcoff_ppc_relocate_section): Likewise. * coff-sh.c (sh_relocate_section): Likewise. * coff-tic80.c (coff_tic80_relocate_section): Likewise. * coff-w65.c (w65_reloc16_extra_cases): Likewise. * coff-z8k.c (extra_case): Likewise. * coff64-rs6000.c (xcoff64_ppc_relocate_section): Likewise. * cofflink.c (_bfd_coff_reloc_link_order): Likewise. (_bfd_coff_generic_relocate_section): Likewise. * ecoff.c (ecoff_reloc_link_order): Likewise. * elf-hppa.h (elf_hppa_relocate_section): Likewise. * elf-m10200.c (mn10200_elf_relocate_section): Likewise. * elf-m10300.c (mn10300_elf_relocate_section): Likewise. * elf32-arm.h (elf32_arm_relocate_section): Likewise. * elf32-avr.c (elf32_avr_relocate_section): Likewise. * elf32-cr16c.c (elf32_cr16c_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Likewise. * elf32-crx.c (elf32_crx_relocate_section): Likewise. * elf32-d10v.c (elf32_d10v_relocate_section): Likewise. * elf32-fr30.c (fr30_elf_relocate_section): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-h8300.c (elf32_h8_relocate_section): Likewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. * elf32-i370.c (i370_elf_relocate_section): Likewise. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-i860.c (elf32_i860_relocate_section): Likewise. * elf32-ip2k.c (ip2k_elf_relocate_section): Likewise. * elf32-iq2000.c (iq2000_elf_relocate_section): Likewise. * elf32-m32r.c (m32r_elf_relocate_section): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-mcore.c (mcore_elf_relocate_section): Likewise. * elf32-msp430.c (elf32_msp430_relocate_section): Likewise. * elf32-openrisc.c (openrisc_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-s390.c (elf_s390_relocate_section): Likewise. * elf32-sh.c (sh_elf_relocate_section): Likewise. * elf32-sparc.c (elf32_sparc_relocate_section): Likewise. * elf32-v850.c (v850_elf_relocate_section): Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise. * elf64-alpha.c (elf64_alpha_relocate_section): Likewise. * elf64-mmix.c (mmix_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-s390.c (elf_s390_relocate_section): Likewise. * elf64-sh64.c (sh_elf64_relocate_section): Likewise. * elf64-sparc.c (sparc64_elf_relocate_section): Likewise. * elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise. * elflink.c (elf_reloc_link_order): Likewise. * elfxx-ia64.c (elfNN_ia64_relocate_section): Likewise. * elfxx-mips.c (_bfd_mips_elf_relocate_section): Likewise. (_bfd_elf_mips_get_relocated_section_contents): Likewise. * linker.c (_bfd_generic_reloc_link_order): Likewise. * pdp11.c (pdp11_aout_link_input_section): Likewise. (aout_link_reloc_link_order): Likewise. * reloc.c (bfd_generic_get_relocated_section_contents): Likewise. * xcofflink.c (xcoff_reloc_link_order): Likewise. * simple.c (simple_dummy_reloc_overflow): Updated. include/ 2004-10-21 H.J. Lu <hongjiu.lu@intel.com> PR 463 * bfdlink.h (bfd_link_callbacks): Add a pointer to struct bfd_link_hash_entry to reloc_overflow. ld/ 2004-10-21 H.J. Lu <hongjiu.lu@intel.com> PR 463 * ldmain.c (reloc_overflow): Accept a pointer to struct bfd_link_hash_entry. Report symbol location for relocation overflow.
2004-10-21 17:28:33 +02:00
(bfd_vma) 0, input_bfd, input_section,
rel->r_offset);
2002-12-30 20:25:13 +01:00
break;
case bfd_reloc_undefined:
r = info->callbacks->undefined_symbol
(info, name, input_bfd, input_section, rel->r_offset, TRUE);
break;
case bfd_reloc_outofrange:
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
msg = _("internal error: branch/jump to an odd address detected");
2002-12-30 20:25:13 +01:00
break;
case bfd_reloc_notsupported:
msg = _("internal error: unsupported relocation error");
break;
case bfd_reloc_dangerous:
msg = _("internal error: dangerous relocation");
break;
default:
msg = _("internal error: unknown error");
break;
}
if (msg)
r = info->callbacks->warning
(info, msg, name, input_bfd, input_section, rel->r_offset);
if (!r)
return FALSE;
}
}
return TRUE;
}
/* The final processing done just before writing out a MSP430 ELF object
file. This gets the MSP430 architecture right based on the machine
number. */
static void
bfd_elf_msp430_final_write_processing (bfd * abfd,
bfd_boolean linker ATTRIBUTE_UNUSED)
2002-12-30 20:25:13 +01:00
{
unsigned long val;
switch (bfd_get_mach (abfd))
{
default:
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
case bfd_mach_msp110: val = E_MSP430_MACH_MSP430x11x1; break;
case bfd_mach_msp11: val = E_MSP430_MACH_MSP430x11; break;
case bfd_mach_msp12: val = E_MSP430_MACH_MSP430x12; break;
case bfd_mach_msp13: val = E_MSP430_MACH_MSP430x13; break;
case bfd_mach_msp14: val = E_MSP430_MACH_MSP430x14; break;
case bfd_mach_msp15: val = E_MSP430_MACH_MSP430x15; break;
case bfd_mach_msp16: val = E_MSP430_MACH_MSP430x16; break;
case bfd_mach_msp31: val = E_MSP430_MACH_MSP430x31; break;
case bfd_mach_msp32: val = E_MSP430_MACH_MSP430x32; break;
case bfd_mach_msp33: val = E_MSP430_MACH_MSP430x33; break;
case bfd_mach_msp41: val = E_MSP430_MACH_MSP430x41; break;
case bfd_mach_msp42: val = E_MSP430_MACH_MSP430x42; break;
case bfd_mach_msp43: val = E_MSP430_MACH_MSP430x43; break;
case bfd_mach_msp44: val = E_MSP430_MACH_MSP430x44; break;
case bfd_mach_msp20: val = E_MSP430_MACH_MSP430x20; break;
case bfd_mach_msp22: val = E_MSP430_MACH_MSP430x22; break;
case bfd_mach_msp23: val = E_MSP430_MACH_MSP430x23; break;
case bfd_mach_msp24: val = E_MSP430_MACH_MSP430x24; break;
case bfd_mach_msp26: val = E_MSP430_MACH_MSP430x26; break;
case bfd_mach_msp46: val = E_MSP430_MACH_MSP430x46; break;
case bfd_mach_msp47: val = E_MSP430_MACH_MSP430x47; break;
case bfd_mach_msp54: val = E_MSP430_MACH_MSP430x54; break;
case bfd_mach_msp430x: val = E_MSP430_MACH_MSP430X; break;
2002-12-30 20:25:13 +01:00
}
elf_elfheader (abfd)->e_machine = EM_MSP430;
elf_elfheader (abfd)->e_flags &= ~EF_MSP430_MACH;
elf_elfheader (abfd)->e_flags |= val;
}
/* Set the right machine number. */
static bfd_boolean
elf32_msp430_object_p (bfd * abfd)
2002-12-30 20:25:13 +01:00
{
int e_set = bfd_mach_msp14;
if (elf_elfheader (abfd)->e_machine == EM_MSP430
|| elf_elfheader (abfd)->e_machine == EM_MSP430_OLD)
{
int e_mach = elf_elfheader (abfd)->e_flags & EF_MSP430_MACH;
switch (e_mach)
{
default:
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
case E_MSP430_MACH_MSP430x11: e_set = bfd_mach_msp11; break;
case E_MSP430_MACH_MSP430x11x1: e_set = bfd_mach_msp110; break;
case E_MSP430_MACH_MSP430x12: e_set = bfd_mach_msp12; break;
case E_MSP430_MACH_MSP430x13: e_set = bfd_mach_msp13; break;
case E_MSP430_MACH_MSP430x14: e_set = bfd_mach_msp14; break;
case E_MSP430_MACH_MSP430x15: e_set = bfd_mach_msp15; break;
case E_MSP430_MACH_MSP430x16: e_set = bfd_mach_msp16; break;
case E_MSP430_MACH_MSP430x31: e_set = bfd_mach_msp31; break;
case E_MSP430_MACH_MSP430x32: e_set = bfd_mach_msp32; break;
case E_MSP430_MACH_MSP430x33: e_set = bfd_mach_msp33; break;
case E_MSP430_MACH_MSP430x41: e_set = bfd_mach_msp41; break;
case E_MSP430_MACH_MSP430x42: e_set = bfd_mach_msp42; break;
case E_MSP430_MACH_MSP430x43: e_set = bfd_mach_msp43; break;
case E_MSP430_MACH_MSP430x44: e_set = bfd_mach_msp44; break;
case E_MSP430_MACH_MSP430x20: e_set = bfd_mach_msp20; break;
case E_MSP430_MACH_MSP430x22: e_set = bfd_mach_msp22; break;
case E_MSP430_MACH_MSP430x23: e_set = bfd_mach_msp23; break;
case E_MSP430_MACH_MSP430x24: e_set = bfd_mach_msp24; break;
case E_MSP430_MACH_MSP430x26: e_set = bfd_mach_msp26; break;
case E_MSP430_MACH_MSP430x46: e_set = bfd_mach_msp46; break;
case E_MSP430_MACH_MSP430x47: e_set = bfd_mach_msp47; break;
case E_MSP430_MACH_MSP430x54: e_set = bfd_mach_msp54; break;
case E_MSP430_MACH_MSP430X: e_set = bfd_mach_msp430x; break;
2002-12-30 20:25:13 +01:00
}
}
2015-08-12 13:32:43 +02:00
2002-12-30 20:25:13 +01:00
return bfd_default_set_arch_mach (abfd, bfd_arch_msp430, e_set);
}
/* These functions handle relaxing for the msp430.
Relaxation required only in two cases:
- Bad hand coding like jumps from one section to another or
from file to file.
2013-01-15 09:35:39 +01:00
- Sibling calls. This will affect only 'jump label' polymorph. Without
relaxing this enlarges code by 2 bytes. Sibcalls implemented but
do not work in gcc's port by the reason I do not know.
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
- To convert out of range conditional jump instructions (found inside
a function) into inverted jumps over an unconditional branch instruction.
Anyway, if a relaxation required, user should pass -relax option to the
linker.
There are quite a few relaxing opportunities available on the msp430:
================================================================
1. 3 words -> 1 word
eq == jeq label jne +4; br lab
ne != jne label jeq +4; br lab
lt < jl label jge +4; br lab
ltu < jlo label lhs +4; br lab
ge >= jge label jl +4; br lab
geu >= jhs label jlo +4; br lab
2. 4 words -> 1 word
ltn < jn jn +2; jmp +4; br lab
3. 4 words -> 2 words
gt > jeq +2; jge label jeq +6; jl +4; br label
gtu > jeq +2; jhs label jeq +6; jlo +4; br label
4. 4 words -> 2 words and 2 labels
leu <= jeq label; jlo label jeq +2; jhs +4; br label
le <= jeq label; jl label jeq +2; jge +4; br label
=================================================================
codemap for first cases is (labels masked ):
eq: 0x2002,0x4010,0x0000 -> 0x2400
ne: 0x2402,0x4010,0x0000 -> 0x2000
lt: 0x3402,0x4010,0x0000 -> 0x3800
ltu: 0x2c02,0x4010,0x0000 -> 0x2800
ge: 0x3802,0x4010,0x0000 -> 0x3400
geu: 0x2802,0x4010,0x0000 -> 0x2c00
second case:
ltn: 0x3001,0x3c02,0x4010,0x0000 -> 0x3000
third case:
gt: 0x2403,0x3802,0x4010,0x0000 -> 0x2401,0x3400
gtu: 0x2403,0x2802,0x4010,0x0000 -> 0x2401,0x2c00
fourth case:
leu: 0x2401,0x2c02,0x4010,0x0000 -> 0x2400,0x2800
le: 0x2401,0x3402,0x4010,0x0000 -> 0x2400,0x3800
Unspecified case :)
jump: 0x4010,0x0000 -> 0x3c00. */
#define NUMB_RELAX_CODES 12
static struct rcodes_s
{
int f0, f1; /* From code. */
int t0, t1; /* To code. */
int labels; /* Position of labels: 1 - one label at first
word, 2 - one at second word, 3 - two
labels at both. */
int cdx; /* Words to match. */
int bs; /* Shrink bytes. */
int off; /* Offset from old label for new code. */
int ncl; /* New code length. */
} rcode[] =
{/* lab,cdx,bs,off,ncl */
{ 0x0000, 0x0000, 0x3c00, 0x0000, 1, 0, 2, 2, 2}, /* jump */
{ 0x0000, 0x2002, 0x2400, 0x0000, 1, 1, 4, 4, 2}, /* eq */
{ 0x0000, 0x2402, 0x2000, 0x0000, 1, 1, 4, 4, 2}, /* ne */
{ 0x0000, 0x3402, 0x3800, 0x0000, 1, 1, 4, 4, 2}, /* lt */
{ 0x0000, 0x2c02, 0x2800, 0x0000, 1, 1, 4, 4, 2}, /* ltu */
{ 0x0000, 0x3802, 0x3400, 0x0000, 1, 1, 4, 4, 2}, /* ge */
{ 0x0000, 0x2802, 0x2c00, 0x0000, 1, 1, 4, 4, 2}, /* geu */
{ 0x3001, 0x3c02, 0x3000, 0x0000, 1, 2, 6, 6, 2}, /* ltn */
{ 0x2403, 0x3802, 0x2401, 0x3400, 2, 2, 4, 6, 4}, /* gt */
{ 0x2403, 0x2802, 0x2401, 0x2c00, 2, 2, 4, 6, 4}, /* gtu */
{ 0x2401, 0x2c02, 0x2400, 0x2800, 3, 2, 4, 6, 4}, /* leu , 2 labels */
{ 0x2401, 0x2c02, 0x2400, 0x2800, 3, 2, 4, 6, 4}, /* le , 2 labels */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0}
};
/* Return TRUE if a symbol exists at the given address. */
static bfd_boolean
msp430_elf_symbol_address_p (bfd * abfd,
asection * sec,
Elf_Internal_Sym * isym,
bfd_vma addr)
{
Elf_Internal_Shdr *symtab_hdr;
unsigned int sec_shndx;
Elf_Internal_Sym *isymend;
struct elf_link_hash_entry **sym_hashes;
struct elf_link_hash_entry **end_hashes;
unsigned int symcount;
sec_shndx = _bfd_elf_section_from_bfd_section (abfd, sec);
/* Examine all the local symbols. */
symtab_hdr = &elf_tdata (abfd)->symtab_hdr;
for (isymend = isym + symtab_hdr->sh_info; isym < isymend; isym++)
if (isym->st_shndx == sec_shndx && isym->st_value == addr)
return TRUE;
symcount = (symtab_hdr->sh_size / sizeof (Elf32_External_Sym)
- symtab_hdr->sh_info);
sym_hashes = elf_sym_hashes (abfd);
end_hashes = sym_hashes + symcount;
for (; sym_hashes < end_hashes; sym_hashes++)
{
struct elf_link_hash_entry *sym_hash = *sym_hashes;
if ((sym_hash->root.type == bfd_link_hash_defined
|| sym_hash->root.type == bfd_link_hash_defweak)
&& sym_hash->root.u.def.section == sec
&& sym_hash->root.u.def.value == addr)
return TRUE;
}
return FALSE;
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Adjust all local symbols defined as '.section + 0xXXXX' (.section has
sec_shndx) referenced from current and other sections. */
static bfd_boolean
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
msp430_elf_relax_adjust_locals (bfd * abfd, asection * sec, bfd_vma addr,
int count, unsigned int sec_shndx,
bfd_vma toaddr)
{
Elf_Internal_Shdr *symtab_hdr;
Elf_Internal_Rela *irel;
Elf_Internal_Rela *irelend;
Elf_Internal_Sym *isym;
irel = elf_section_data (sec)->relocs;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
if (irel == NULL)
return TRUE;
irelend = irel + sec->reloc_count;
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
isym = (Elf_Internal_Sym *) symtab_hdr->contents;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
for (;irel < irelend; irel++)
{
unsigned int sidx = ELF32_R_SYM(irel->r_info);
Elf_Internal_Sym *lsym = isym + sidx;
/* Adjust symbols referenced by .sec+0xXX. */
if (irel->r_addend > addr && irel->r_addend < toaddr
&& sidx < symtab_hdr->sh_info
&& lsym->st_shndx == sec_shndx)
irel->r_addend -= count;
}
2015-08-12 13:32:43 +02:00
return TRUE;
}
/* Delete some bytes from a section while relaxing. */
static bfd_boolean
msp430_elf_relax_delete_bytes (bfd * abfd, asection * sec, bfd_vma addr,
int count)
{
Elf_Internal_Shdr *symtab_hdr;
unsigned int sec_shndx;
bfd_byte *contents;
Elf_Internal_Rela *irel;
Elf_Internal_Rela *irelend;
bfd_vma toaddr;
Elf_Internal_Sym *isym;
Elf_Internal_Sym *isymend;
struct elf_link_hash_entry **sym_hashes;
struct elf_link_hash_entry **end_hashes;
unsigned int symcount;
asection *p;
sec_shndx = _bfd_elf_section_from_bfd_section (abfd, sec);
contents = elf_section_data (sec)->this_hdr.contents;
toaddr = sec->size;
irel = elf_section_data (sec)->relocs;
irelend = irel + sec->reloc_count;
/* Actually delete the bytes. */
memmove (contents + addr, contents + addr + count,
(size_t) (toaddr - addr - count));
sec->size -= count;
/* Adjust all the relocs. */
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
isym = (Elf_Internal_Sym *) symtab_hdr->contents;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
for (; irel < irelend; irel++)
{
/* Get the new reloc address. */
if ((irel->r_offset > addr && irel->r_offset < toaddr))
irel->r_offset -= count;
}
for (p = abfd->sections; p != NULL; p = p->next)
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
msp430_elf_relax_adjust_locals (abfd,p,addr,count,sec_shndx,toaddr);
2015-08-12 13:32:43 +02:00
/* Adjust the local symbols defined in this section. */
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
isym = (Elf_Internal_Sym *) symtab_hdr->contents;
for (isymend = isym + symtab_hdr->sh_info; isym < isymend; isym++)
{
const char * name;
name = bfd_elf_string_from_elf_section
(abfd, symtab_hdr->sh_link, isym->st_name);
name = (name == NULL || * name == 0) ? bfd_section_name (abfd, sec) : name;
if (isym->st_shndx != sec_shndx)
continue;
2015-08-12 13:32:43 +02:00
if (isym->st_value > addr
&& (isym->st_value < toaddr
/* We also adjust a symbol at the end of the section if its name is
on the list below. These symbols are used for debug info
generation and they refer to the end of the current section, not
the start of the next section. */
|| (isym->st_value == toaddr
&& name != NULL
&& (CONST_STRNEQ (name, ".Letext")
|| CONST_STRNEQ (name, ".LFE")))))
{
if (isym->st_value < addr + count)
isym->st_value = addr;
else
isym->st_value -= count;
}
/* Adjust the function symbol's size as well. */
else if (ELF_ST_TYPE (isym->st_info) == STT_FUNC
&& isym->st_value + isym->st_size > addr
&& isym->st_value + isym->st_size < toaddr)
isym->st_size -= count;
}
/* Now adjust the global symbols defined in this section. */
symcount = (symtab_hdr->sh_size / sizeof (Elf32_External_Sym)
- symtab_hdr->sh_info);
sym_hashes = elf_sym_hashes (abfd);
end_hashes = sym_hashes + symcount;
for (; sym_hashes < end_hashes; sym_hashes++)
{
struct elf_link_hash_entry *sym_hash = *sym_hashes;
if ((sym_hash->root.type == bfd_link_hash_defined
|| sym_hash->root.type == bfd_link_hash_defweak)
&& sym_hash->root.u.def.section == sec
&& sym_hash->root.u.def.value > addr
&& sym_hash->root.u.def.value < toaddr)
{
if (sym_hash->root.u.def.value < addr + count)
sym_hash->root.u.def.value = addr;
else
sym_hash->root.u.def.value -= count;
}
/* Adjust the function symbol's size as well. */
else if (sym_hash->root.type == bfd_link_hash_defined
&& sym_hash->root.u.def.section == sec
&& sym_hash->type == STT_FUNC
&& sym_hash->root.u.def.value + sym_hash->size > addr
&& sym_hash->root.u.def.value + sym_hash->size < toaddr)
sym_hash->size -= count;
}
return TRUE;
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Insert two words into a section whilst relaxing. */
static bfd_byte *
msp430_elf_relax_add_two_words (bfd * abfd, asection * sec, bfd_vma addr,
int word1, int word2)
{
Elf_Internal_Shdr *symtab_hdr;
unsigned int sec_shndx;
bfd_byte *contents;
Elf_Internal_Rela *irel;
Elf_Internal_Rela *irelend;
Elf_Internal_Sym *isym;
Elf_Internal_Sym *isymend;
struct elf_link_hash_entry **sym_hashes;
struct elf_link_hash_entry **end_hashes;
unsigned int symcount;
bfd_vma sec_end;
asection *p;
contents = elf_section_data (sec)->this_hdr.contents;
sec_end = sec->size;
/* Make space for the new words. */
contents = bfd_realloc (contents, sec_end + 4);
memmove (contents + addr + 4, contents + addr, sec_end - addr);
/* Insert the new words. */
bfd_put_16 (abfd, word1, contents + addr);
bfd_put_16 (abfd, word2, contents + addr + 2);
/* Update the section information. */
sec->size += 4;
2015-08-12 13:32:43 +02:00
elf_section_data (sec)->this_hdr.contents = contents;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Adjust all the relocs. */
irel = elf_section_data (sec)->relocs;
irelend = irel + sec->reloc_count;
for (; irel < irelend; irel++)
if ((irel->r_offset >= addr && irel->r_offset < sec_end))
irel->r_offset += 4;
/* Adjust the local symbols defined in this section. */
sec_shndx = _bfd_elf_section_from_bfd_section (abfd, sec);
for (p = abfd->sections; p != NULL; p = p->next)
msp430_elf_relax_adjust_locals (abfd, p, addr, -4,
sec_shndx, sec_end);
/* Adjust the global symbols affected by the move. */
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
isym = (Elf_Internal_Sym *) symtab_hdr->contents;
for (isymend = isym + symtab_hdr->sh_info; isym < isymend; isym++)
if (isym->st_shndx == sec_shndx
&& isym->st_value >= addr && isym->st_value < sec_end)
isym->st_value += 4;
/* Now adjust the global symbols defined in this section. */
symcount = (symtab_hdr->sh_size / sizeof (Elf32_External_Sym)
- symtab_hdr->sh_info);
sym_hashes = elf_sym_hashes (abfd);
end_hashes = sym_hashes + symcount;
for (; sym_hashes < end_hashes; sym_hashes++)
{
struct elf_link_hash_entry *sym_hash = *sym_hashes;
if ((sym_hash->root.type == bfd_link_hash_defined
|| sym_hash->root.type == bfd_link_hash_defweak)
&& sym_hash->root.u.def.section == sec
&& sym_hash->root.u.def.value >= addr
&& sym_hash->root.u.def.value < sec_end)
sym_hash->root.u.def.value += 4;
}
return contents;
}
2015-08-12 13:32:43 +02:00
static bfd_boolean
msp430_elf_relax_section (bfd * abfd, asection * sec,
struct bfd_link_info * link_info,
bfd_boolean * again)
{
Elf_Internal_Shdr * symtab_hdr;
Elf_Internal_Rela * internal_relocs;
Elf_Internal_Rela * irel;
Elf_Internal_Rela * irelend;
bfd_byte * contents = NULL;
Elf_Internal_Sym * isymbuf = NULL;
/* Assume nothing changes. */
*again = FALSE;
/* We don't have to do anything for a relocatable link, if
this section does not have relocs, or if this is not a
code section. */
if (link_info->relocatable
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
|| (sec->flags & SEC_RELOC) == 0
|| sec->reloc_count == 0 || (sec->flags & SEC_CODE) == 0)
return TRUE;
symtab_hdr = & elf_tdata (abfd)->symtab_hdr;
/* Get a copy of the native relocations. */
internal_relocs =
_bfd_elf_link_read_relocs (abfd, sec, NULL, NULL, link_info->keep_memory);
if (internal_relocs == NULL)
goto error_return;
/* Walk through them looking for relaxing opportunities. */
irelend = internal_relocs + sec->reloc_count;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Do code size growing relocs first. */
for (irel = internal_relocs; irel < irelend; irel++)
{
bfd_vma symval;
/* If this isn't something that can be relaxed, then ignore
this reloc. */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
if (uses_msp430x_relocs (abfd)
&& ELF32_R_TYPE (irel->r_info) == (int) R_MSP430X_10_PCREL)
;
else if (! uses_msp430x_relocs (abfd)
&& ELF32_R_TYPE (irel->r_info) == (int) R_MSP430_10_PCREL)
;
else
continue;
/* Get the section contents if we haven't done so already. */
if (contents == NULL)
{
/* Get cached copy if it exists. */
if (elf_section_data (sec)->this_hdr.contents != NULL)
contents = elf_section_data (sec)->this_hdr.contents;
else if (! bfd_malloc_and_get_section (abfd, sec, &contents))
goto error_return;
}
/* Read this BFD's local symbols if we haven't done so already. */
if (isymbuf == NULL && symtab_hdr->sh_info != 0)
{
isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents;
if (isymbuf == NULL)
isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr,
symtab_hdr->sh_info, 0,
NULL, NULL, NULL);
if (isymbuf == NULL)
goto error_return;
}
/* Get the value of the symbol referred to by the reloc. */
if (ELF32_R_SYM (irel->r_info) < symtab_hdr->sh_info)
{
/* A local symbol. */
Elf_Internal_Sym *isym;
asection *sym_sec;
isym = isymbuf + ELF32_R_SYM (irel->r_info);
if (isym->st_shndx == SHN_UNDEF)
sym_sec = bfd_und_section_ptr;
else if (isym->st_shndx == SHN_ABS)
sym_sec = bfd_abs_section_ptr;
else if (isym->st_shndx == SHN_COMMON)
sym_sec = bfd_com_section_ptr;
else
sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx);
symval = (isym->st_value
+ sym_sec->output_section->vma + sym_sec->output_offset);
}
else
{
unsigned long indx;
struct elf_link_hash_entry *h;
/* An external symbol. */
indx = ELF32_R_SYM (irel->r_info) - symtab_hdr->sh_info;
h = elf_sym_hashes (abfd)[indx];
BFD_ASSERT (h != NULL);
if (h->root.type != bfd_link_hash_defined
&& h->root.type != bfd_link_hash_defweak)
/* This appears to be a reference to an undefined
symbol. Just ignore it--it will be caught by the
regular reloc processing. */
continue;
symval = (h->root.u.def.value
+ h->root.u.def.section->output_section->vma
+ h->root.u.def.section->output_offset);
}
/* For simplicity of coding, we are going to modify the section
contents, the section relocs, and the BFD symbol table. We
must tell the rest of the code not to free up this
information. It would be possible to instead create a table
of changes which have to be made, as is done in coff-mips.c;
that would be more work, but would require less memory when
the linker is run. */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
bfd_signed_vma value = symval;
int opcode;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Compute the value that will be relocated. */
value += irel->r_addend;
/* Convert to PC relative. */
value -= (sec->output_section->vma + sec->output_offset);
value -= irel->r_offset;
value -= 2;
/* Scale. */
value >>= 1;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* If it is in range then no modifications are needed. */
if (value >= -512 && value <= 511)
continue;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Get the opcode. */
opcode = bfd_get_16 (abfd, contents + irel->r_offset);
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Compute the new opcode. We are going to convert:
J<cond> label
into:
J<inv-cond> 1f
BR[A] #label
1: */
switch (opcode & 0xfc00)
{
2015-08-12 13:32:43 +02:00
case 0x3800: opcode = 0x3402; break; /* Jl -> Jge +2 */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
case 0x3400: opcode = 0x3802; break; /* Jge -> Jl +2 */
case 0x2c00: opcode = 0x2802; break; /* Jhs -> Jlo +2 */
case 0x2800: opcode = 0x2c02; break; /* Jlo -> Jhs +2 */
case 0x2400: opcode = 0x2002; break; /* Jeq -> Jne +2 */
case 0x2000: opcode = 0x2402; break; /* jne -> Jeq +2 */
case 0x3000: /* jn */
/* There is no direct inverse of the Jn insn.
FIXME: we could do this as:
Jn 1f
br 2f
1: br label
2: */
continue;
default:
/* Not a conditional branch instruction. */
/* fprintf (stderr, "unrecog: %x\n", opcode); */
continue;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Note that we've changed the relocs, section contents, etc. */
elf_section_data (sec)->relocs = internal_relocs;
elf_section_data (sec)->this_hdr.contents = contents;
symtab_hdr->contents = (unsigned char *) isymbuf;
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Install the new opcode. */
bfd_put_16 (abfd, opcode, contents + irel->r_offset);
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Insert the new branch instruction. */
if (uses_msp430x_relocs (abfd))
{
2015-08-12 13:32:43 +02:00
/* Insert an absolute branch (aka MOVA) instruction. */
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
contents = msp430_elf_relax_add_two_words
(abfd, sec, irel->r_offset + 2, 0x0080, 0x0000);
/* Update the relocation to point to the inserted branch
instruction. Note - we are changing a PC-relative reloc
into an absolute reloc, but this is OK because we have
arranged with the assembler to have the reloc's value be
a (local) symbol, not a section+offset value. */
irel->r_offset += 2;
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_MSP430X_ABS20_ADR_SRC);
}
else
{
contents = msp430_elf_relax_add_two_words
(abfd, sec, irel->r_offset + 2, 0x4030, 0x0000);
/* See comment above about converting a 10-bit PC-rel
relocation into a 16-bit absolute relocation. */
irel->r_offset += 4;
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_MSP430_16);
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Growing the section may mean that other
conditional branches need to be fixed. */
*again = TRUE;
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
for (irel = internal_relocs; irel < irelend; irel++)
{
bfd_vma symval;
/* Get the section contents if we haven't done so already. */
if (contents == NULL)
{
/* Get cached copy if it exists. */
if (elf_section_data (sec)->this_hdr.contents != NULL)
contents = elf_section_data (sec)->this_hdr.contents;
else if (! bfd_malloc_and_get_section (abfd, sec, &contents))
goto error_return;
}
/* Read this BFD's local symbols if we haven't done so already. */
if (isymbuf == NULL && symtab_hdr->sh_info != 0)
{
isymbuf = (Elf_Internal_Sym *) symtab_hdr->contents;
if (isymbuf == NULL)
isymbuf = bfd_elf_get_elf_syms (abfd, symtab_hdr,
symtab_hdr->sh_info, 0,
NULL, NULL, NULL);
if (isymbuf == NULL)
goto error_return;
}
/* Get the value of the symbol referred to by the reloc. */
if (ELF32_R_SYM (irel->r_info) < symtab_hdr->sh_info)
{
/* A local symbol. */
Elf_Internal_Sym *isym;
asection *sym_sec;
isym = isymbuf + ELF32_R_SYM (irel->r_info);
if (isym->st_shndx == SHN_UNDEF)
sym_sec = bfd_und_section_ptr;
else if (isym->st_shndx == SHN_ABS)
sym_sec = bfd_abs_section_ptr;
else if (isym->st_shndx == SHN_COMMON)
sym_sec = bfd_com_section_ptr;
else
sym_sec = bfd_section_from_elf_index (abfd, isym->st_shndx);
symval = (isym->st_value
+ sym_sec->output_section->vma + sym_sec->output_offset);
}
else
{
unsigned long indx;
struct elf_link_hash_entry *h;
/* An external symbol. */
indx = ELF32_R_SYM (irel->r_info) - symtab_hdr->sh_info;
h = elf_sym_hashes (abfd)[indx];
BFD_ASSERT (h != NULL);
if (h->root.type != bfd_link_hash_defined
&& h->root.type != bfd_link_hash_defweak)
/* This appears to be a reference to an undefined
symbol. Just ignore it--it will be caught by the
regular reloc processing. */
continue;
symval = (h->root.u.def.value
+ h->root.u.def.section->output_section->vma
+ h->root.u.def.section->output_offset);
}
/* For simplicity of coding, we are going to modify the section
contents, the section relocs, and the BFD symbol table. We
must tell the rest of the code not to free up this
information. It would be possible to instead create a table
of changes which have to be made, as is done in coff-mips.c;
that would be more work, but would require less memory when
the linker is run. */
/* Try to turn a 16bit pc-relative branch into a 10bit pc-relative
branch. */
2015-08-12 13:32:43 +02:00
/* Paranoia? paranoia... */
if (! uses_msp430x_relocs (abfd)
&& ELF32_R_TYPE (irel->r_info) == (int) R_MSP430_RL_PCREL)
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
{
bfd_vma value = symval;
/* Deal with pc-relative gunk. */
value -= (sec->output_section->vma + sec->output_offset);
value -= irel->r_offset;
value += irel->r_addend;
/* See if the value will fit in 10 bits, note the high value is
1016 as the target will be two bytes closer if we are
able to relax. */
if ((long) value < 1016 && (long) value > -1016)
{
int code0 = 0, code1 = 0, code2 = 0;
int i;
struct rcodes_s *rx;
/* Get the opcode. */
if (irel->r_offset >= 6)
code0 = bfd_get_16 (abfd, contents + irel->r_offset - 6);
if (irel->r_offset >= 4)
code1 = bfd_get_16 (abfd, contents + irel->r_offset - 4);
code2 = bfd_get_16 (abfd, contents + irel->r_offset - 2);
if (code2 != 0x4010)
continue;
/* Check r4 and r3. */
for (i = NUMB_RELAX_CODES - 1; i >= 0; i--)
{
rx = &rcode[i];
if (rx->cdx == 2 && rx->f0 == code0 && rx->f1 == code1)
break;
else if (rx->cdx == 1 && rx->f1 == code1)
break;
else if (rx->cdx == 0) /* This is an unconditional jump. */
break;
}
/* Check labels:
.Label0: ; we do not care about this label
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
jeq +6
.Label1: ; make sure there is no label here
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
jl +4
.Label2: ; make sure there is no label here
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
br .Label_dst
So, if there is .Label1 or .Label2 we cannot relax this code.
This actually should not happen, cause for relaxable
instructions we use RL_PCREL reloc instead of 16_PCREL.
Will change this in the future. */
if (rx->cdx > 0
&& msp430_elf_symbol_address_p (abfd, sec, isymbuf,
irel->r_offset - 2))
continue;
if (rx->cdx > 1
&& msp430_elf_symbol_address_p (abfd, sec, isymbuf,
irel->r_offset - 4))
continue;
/* Note that we've changed the relocs, section contents, etc. */
elf_section_data (sec)->relocs = internal_relocs;
elf_section_data (sec)->this_hdr.contents = contents;
symtab_hdr->contents = (unsigned char *) isymbuf;
/* Fix the relocation's type. */
if (uses_msp430x_relocs (abfd))
{
if (rx->labels == 3) /* Handle special cases. */
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_MSP430X_2X_PCREL);
else
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_MSP430X_10_PCREL);
}
else
{
if (rx->labels == 3) /* Handle special cases. */
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_MSP430_2X_PCREL);
else
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_MSP430_10_PCREL);
}
/* Fix the opcode right way. */
bfd_put_16 (abfd, rx->t0, contents + irel->r_offset - rx->off);
if (rx->t1)
bfd_put_16 (abfd, rx->t1,
contents + irel->r_offset - rx->off + 2);
/* Delete bytes. */
if (!msp430_elf_relax_delete_bytes (abfd, sec,
irel->r_offset - rx->off +
rx->ncl, rx->bs))
goto error_return;
/* Handle unconditional jumps. */
if (rx->cdx == 0)
irel->r_offset -= 2;
/* That will change things, so, we should relax again.
Note that this is not required, and it may be slow. */
*again = TRUE;
}
}
/* Try to turn a 16-bit absolute branch into a 10-bit pc-relative
branch. */
if (uses_msp430x_relocs (abfd)
&& ELF32_R_TYPE (irel->r_info) == R_MSP430X_ABS16)
{
bfd_vma value = symval;
value -= (sec->output_section->vma + sec->output_offset);
value -= irel->r_offset;
value += irel->r_addend;
2015-08-12 13:32:43 +02:00
/* See if the value will fit in 10 bits, note the high value is
1016 as the target will be two bytes closer if we are
able to relax. */
if ((long) value < 1016 && (long) value > -1016)
{
int code2;
/* Get the opcode. */
code2 = bfd_get_16 (abfd, contents + irel->r_offset - 2);
if (code2 != 0x4030)
continue;
/* FIXME: check r4 and r3 ? */
/* FIXME: Handle 0x4010 as well ? */
/* Note that we've changed the relocs, section contents, etc. */
elf_section_data (sec)->relocs = internal_relocs;
elf_section_data (sec)->this_hdr.contents = contents;
symtab_hdr->contents = (unsigned char *) isymbuf;
/* Fix the relocation's type. */
if (uses_msp430x_relocs (abfd))
{
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_MSP430X_10_PCREL);
}
else
{
irel->r_info = ELF32_R_INFO (ELF32_R_SYM (irel->r_info),
R_MSP430_10_PCREL);
}
/* Fix the opcode right way. */
bfd_put_16 (abfd, 0x3c00, contents + irel->r_offset - 2);
irel->r_offset -= 2;
/* Delete bytes. */
if (!msp430_elf_relax_delete_bytes (abfd, sec,
irel->r_offset + 2, 2))
goto error_return;
/* That will change things, so, we should relax again.
Note that this is not required, and it may be slow. */
*again = TRUE;
}
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
}
if (isymbuf != NULL && symtab_hdr->contents != (unsigned char *) isymbuf)
{
if (!link_info->keep_memory)
free (isymbuf);
else
{
/* Cache the symbols for elf_link_input_bfd. */
symtab_hdr->contents = (unsigned char *) isymbuf;
}
}
if (contents != NULL
&& elf_section_data (sec)->this_hdr.contents != contents)
{
if (!link_info->keep_memory)
free (contents);
else
{
/* Cache the section contents for elf_link_input_bfd. */
elf_section_data (sec)->this_hdr.contents = contents;
}
}
if (internal_relocs != NULL
&& elf_section_data (sec)->relocs != internal_relocs)
free (internal_relocs);
return TRUE;
error_return:
if (isymbuf != NULL && symtab_hdr->contents != (unsigned char *) isymbuf)
free (isymbuf);
if (contents != NULL
&& elf_section_data (sec)->this_hdr.contents != contents)
free (contents);
if (internal_relocs != NULL
&& elf_section_data (sec)->relocs != internal_relocs)
free (internal_relocs);
return FALSE;
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* Handle an MSP430 specific section when reading an object file.
This is called when bfd_section_from_shdr finds a section with
an unknown type. */
static bfd_boolean
elf32_msp430_section_from_shdr (bfd *abfd,
Elf_Internal_Shdr * hdr,
const char *name,
int shindex)
{
switch (hdr->sh_type)
{
case SHT_MSP430_SEC_FLAGS:
case SHT_MSP430_SYM_ALIASES:
case SHT_MSP430_ATTRIBUTES:
return _bfd_elf_make_section_from_shdr (abfd, hdr, name, shindex);
default:
return FALSE;
}
}
static bfd_boolean
elf32_msp430_obj_attrs_handle_unknown (bfd *abfd, int tag)
{
_bfd_error_handler
(_("Warning: %B: Unknown MSPABI object attribute %d"),
abfd, tag);
return TRUE;
}
/* Determine whether an object attribute tag takes an integer, a
string or both. */
static int
elf32_msp430_obj_attrs_arg_type (int tag)
{
if (tag == Tag_compatibility)
return ATTR_TYPE_FLAG_INT_VAL | ATTR_TYPE_FLAG_STR_VAL;
if (tag < 32)
return ATTR_TYPE_FLAG_INT_VAL;
return (tag & 1) != 0 ? ATTR_TYPE_FLAG_STR_VAL : ATTR_TYPE_FLAG_INT_VAL;
}
static inline const char *
isa_type (int isa)
{
switch (isa)
{
case 1: return "MSP430";
case 2: return "MSP430X";
default: return "unknown";
}
}
static inline const char *
code_model (int model)
{
switch (model)
{
case 1: return "small";
case 2: return "large";
default: return "unknown";
}
}
static inline const char *
data_model (int model)
{
switch (model)
{
case 1: return "small";
case 2: return "large";
case 3: return "restricted large";
default: return "unknown";
}
}
/* Merge MSPABI object attributes from IBFD into OBFD.
Raise an error if there are conflicting attributes. */
static bfd_boolean
elf32_msp430_merge_mspabi_attributes (bfd *ibfd, bfd *obfd)
{
obj_attribute *in_attr;
obj_attribute *out_attr;
bfd_boolean result = TRUE;
static bfd * first_input_bfd = NULL;
/* Skip linker created files. */
if (ibfd->flags & BFD_LINKER_CREATED)
return TRUE;
/* If this is the first real object just copy the attributes. */
if (!elf_known_obj_attributes_proc (obfd)[0].i)
{
_bfd_elf_copy_obj_attributes (ibfd, obfd);
out_attr = elf_known_obj_attributes_proc (obfd);
/* Use the Tag_null value to indicate that
the attributes have been initialized. */
out_attr[0].i = 1;
first_input_bfd = ibfd;
return TRUE;
}
in_attr = elf_known_obj_attributes_proc (ibfd);
out_attr = elf_known_obj_attributes_proc (obfd);
/* The ISAs must be the same. */
if (in_attr[OFBA_MSPABI_Tag_ISA].i != out_attr[OFBA_MSPABI_Tag_ISA].i)
{
_bfd_error_handler
(_("error: %B uses %s instructions but %B uses %s"),
ibfd, first_input_bfd,
isa_type (in_attr[OFBA_MSPABI_Tag_ISA].i),
isa_type (out_attr[OFBA_MSPABI_Tag_ISA].i));
result = FALSE;
}
/* The code models must be the same. */
if (in_attr[OFBA_MSPABI_Tag_Code_Model].i !=
out_attr[OFBA_MSPABI_Tag_Code_Model].i)
{
_bfd_error_handler
(_("error: %B uses the %s code model whereas %B uses the %s code model"),
ibfd, first_input_bfd,
code_model (in_attr[OFBA_MSPABI_Tag_Code_Model].i),
code_model (out_attr[OFBA_MSPABI_Tag_Code_Model].i));
result = FALSE;
}
/* The large code model is only supported by the MSP430X. */
if (in_attr[OFBA_MSPABI_Tag_Code_Model].i == 2
&& out_attr[OFBA_MSPABI_Tag_ISA].i != 2)
{
_bfd_error_handler
(_("error: %B uses the large code model but %B uses MSP430 instructions"),
ibfd, first_input_bfd);
result = FALSE;
}
/* The data models must be the same. */
if (in_attr[OFBA_MSPABI_Tag_Data_Model].i !=
out_attr[OFBA_MSPABI_Tag_Data_Model].i)
{
_bfd_error_handler
(_("error: %B uses the %s data model whereas %B uses the %s data model"),
ibfd, first_input_bfd,
data_model (in_attr[OFBA_MSPABI_Tag_Data_Model].i),
data_model (out_attr[OFBA_MSPABI_Tag_Data_Model].i));
result = FALSE;
}
/* The small code model requires the use of the small data model. */
if (in_attr[OFBA_MSPABI_Tag_Code_Model].i == 1
&& out_attr[OFBA_MSPABI_Tag_Data_Model].i != 1)
{
_bfd_error_handler
(_("error: %B uses the small code model but %B uses the %s data model"),
ibfd, first_input_bfd,
data_model (out_attr[OFBA_MSPABI_Tag_Data_Model].i));
result = FALSE;
}
/* The large data models are only supported by the MSP430X. */
if (in_attr[OFBA_MSPABI_Tag_Data_Model].i > 1
&& out_attr[OFBA_MSPABI_Tag_ISA].i != 2)
{
_bfd_error_handler
(_("error: %B uses the %s data model but %B only uses MSP430 instructions"),
ibfd, first_input_bfd,
data_model (in_attr[OFBA_MSPABI_Tag_Data_Model].i));
result = FALSE;
}
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
return result;
}
/* Merge backend specific data from an object file to the output
object file when linking. */
static bfd_boolean
elf32_msp430_merge_private_bfd_data (bfd * ibfd, bfd * obfd)
{
/* Make sure that the machine number reflects the most
advanced version of the MSP architecture required. */
#define max(a,b) ((a) > (b) ? (a) : (b))
if (bfd_get_mach (ibfd) != bfd_get_mach (obfd))
bfd_default_set_arch_mach (obfd, bfd_get_arch (obfd),
max (bfd_get_mach (ibfd), bfd_get_mach (obfd)));
#undef max
return elf32_msp430_merge_mspabi_attributes (ibfd, obfd);
}
static bfd_boolean
msp430_elf_is_target_special_symbol (bfd *abfd, asymbol *sym)
{
return _bfd_elf_is_local_label_name (abfd, sym->name);
}
static bfd_boolean
uses_large_model (bfd *abfd)
{
obj_attribute * attr;
if (abfd->flags & BFD_LINKER_CREATED)
return FALSE;
attr = elf_known_obj_attributes_proc (abfd);
if (attr == NULL)
return FALSE;
return attr[OFBA_MSPABI_Tag_Code_Model].i == 2;
}
static unsigned int
elf32_msp430_eh_frame_address_size (bfd *abfd, asection *sec ATTRIBUTE_UNUSED)
{
return uses_large_model (abfd) ? 4 : 2;
}
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
/* This is gross. The MSP430 EABI says that (sec 11.5):
"An implementation may choose to use Rel or Rela
type relocations for other relocations."
But it also says that:
2015-08-12 13:32:43 +02:00
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
"Certain relocations are identified as Rela only. [snip]
Where Rela is specified, an implementation must honor
this requirement."
There is one relocation marked as requiring RELA - R_MSP430_ABS_HI16 - but
to keep things simple we choose to use RELA relocations throughout. The
problem is that the TI compiler generates REL relocations, so we have to
be able to accept those as well. */
#define elf_backend_may_use_rel_p 1
#define elf_backend_may_use_rela_p 1
#define elf_backend_default_use_rela_p 1
#undef elf_backend_obj_attrs_vendor
#define elf_backend_obj_attrs_vendor "mspabi"
#undef elf_backend_obj_attrs_section
#define elf_backend_obj_attrs_section ".MSP430.attributes"
#undef elf_backend_obj_attrs_section_type
#define elf_backend_obj_attrs_section_type SHT_MSP430_ATTRIBUTES
#define elf_backend_section_from_shdr elf32_msp430_section_from_shdr
#define elf_backend_obj_attrs_handle_unknown elf32_msp430_obj_attrs_handle_unknown
#undef elf_backend_obj_attrs_arg_type
#define elf_backend_obj_attrs_arg_type elf32_msp430_obj_attrs_arg_type
#define bfd_elf32_bfd_merge_private_bfd_data elf32_msp430_merge_private_bfd_data
#define elf_backend_eh_frame_address_size elf32_msp430_eh_frame_address_size
2002-12-30 20:25:13 +01:00
#define ELF_ARCH bfd_arch_msp430
#define ELF_MACHINE_CODE EM_MSP430
#define ELF_MACHINE_ALT1 EM_MSP430_OLD
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
#define ELF_MAXPAGESIZE 4
2007-03-13 H.J. Lu <hongjiu.lu@intel.com> PR binutils/3826 * elf-bfd.h (elf_backend_data): Add elf_osabi. (_bfd_elf_set_osabi): New. * elf.c (_bfd_elf_set_osabi): New. * elf32-hppa.c (elf32_hppa_post_process_headers): Removed. (elf_backend_post_process_headers): Defined with _bfd_elf_set_osabi. (ELF_OSABI): Properly defined for each target. * elf32-i370.c (i370_elf_post_process_headers): Removed. (ELF_OSABI): Defined. (elf_backend_post_process_headers): Defined with _bfd_elf_set_osabi. * elf32-i386.c (ELF_OSABI): Defined to ELFOSABI_FREEBSD for freebsd. (elf_i386_post_process_headers): Set EI_OSABI with elf_osabi. * elf32-msp430.c (elf32_msp430_post_process_headers): Removed. (ELF_OSABI): Defined. (elf_backend_post_process_headers): Defined with _bfd_elf_set_osabi. * elf64-alpha.c (ELF_OSABI): Defined to ELFOSABI_FREEBSD for freebsd. (elf64_alpha_fbsd_post_process_headers): Set EI_OSABI with elf_osabi. * elf64-hppa.c (elf64_hppa_post_process_headers): Set EI_OSABI with elf_osabi. (ELF_OSABI): Properly defined for each target. (elf_backend_post_process_headers): Defined with _bfd_elf_set_osabi for Linux. * elf64-sparc.c (elf64_sparc_fbsd_post_process_headers): Removed. (ELF_OSABI): Defined to ELFOSABI_FREEBSD for freebsd. (elf_backend_post_process_headers): Defined with _bfd_elf_set_osabi. * elf64-x86-64.c (elf64_x86_64_fbsd_post_process_headers): Removed. (ELF_OSABI): Defined to ELFOSABI_FREEBSD for freebsd. (elf_backend_post_process_headers): Defined with _bfd_elf_set_osabi. * elfcode.h (elf_object_p): Match the ELFOSABI_NONE ELF target with any ELF target of the compatible machine for which we do not have a specific backend. * elfxx-ia64.c (elfNN_hpux_post_process_headers): Set EI_OSABI with elf_osabi. * elfxx-target.h (ELF_OSABI): Default to ELFOSABI_NONE. (elfNN_bed): Initialize elf_osabi with ELF_OSABI.
2007-03-14 03:56:45 +01:00
#define ELF_OSABI ELFOSABI_STANDALONE
2002-12-30 20:25:13 +01:00
bfd target vector rationalisation This renames the bfd targets to <cpu>_<format>_<other>_<endian>_vec. So for example, bfd_elf32_ntradlittlemips_vec becomes mips_elf32_ntrad_le_vec and hp300bsd_vec becomes m68k_aout_hp300bsd_vec. bfd/ * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-ns32k.c, * aout-sparcle.c, * aout0.c, * aoutx.h, * armnetbsd.c, * bout.c, * cf-i386lynx.c, * cf-sparclynx.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-aux.c, * coff-go32.c, * coff-h8300.c, * coff-h8500.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mips.c, * coff-rs6000.c, * coff-sh.c, * coff-sparc.c, * coff-stgo32.c, * coff-svm68k.c, * coff-tic80.c, * coff-u68k.c, * coff-w65.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * config.bfd, * configure.com, * configure.in, * demo64.c, * elf-m10200.c, * elf-m10300.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-gen.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-gen.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * epoc-pe-arm.c, * epoc-pei-arm.c, * hp300bsd.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386bsd.c, * i386dynix.c, * i386freebsd.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * i386os9k.c, * irix-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * m88kopenbsd.c, * mach-o-i386.c, * mach-o-x86-64.c, * makefile.vms, * mipsbsd.c, * mmo.c, * netbsd-core.c, * newsos3.c, * nlm32-alpha.c, * nlm32-i386.c, * nlm32-ppc.c, * nlm32-sparc.c, * ns32knetbsd.c, * osf-core.c, * pc532-mach.c, * pe-arm-wince.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-ppc.c, * pe-sh.c, * pe-x86_64.c, * pei-arm-wince.c, * pei-arm.c, * pei-i386.c, * pei-ia64.c, * pei-mcore.c, * pei-mips.c, * pei-ppc.c, * pei-sh.c, * pei-x86_64.c, * ppcboot.c, * ptrace-core.c, * riscix.c, * sco5-core.c, * som.c, * sparclinux.c, * sparclynx.c, * sparcnetbsd.c, * sunos.c, * targets.c, * trad-core.c, * vax1knetbsd.c, * vaxbsd.c, * vaxnetbsd.c, * versados.c, * vms-alpha.c, * vms-lib.c: Rename bfd targets to <cpu>_<format>_<other>_<endian>_vec. Adjust associated MY macros on aout targets. * configure: Regenerate. binutils/ * emul_aix.c: Update bfd target vector naming. * testsuite/binutils-all/objcopy.exp: Likewise. ld/ * emultempl/metagelf.em: Update bfd target vector naming. * emultempl/nios2elf.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/tic6xdsbt.em: Likewise.
2014-05-02 12:39:40 +02:00
#define TARGET_LITTLE_SYM msp430_elf32_vec
2002-12-30 20:25:13 +01:00
#define TARGET_LITTLE_NAME "elf32-msp430"
#define elf_info_to_howto msp430_info_to_howto_rela
#define elf_info_to_howto_rel NULL
#define elf_backend_relocate_section elf32_msp430_relocate_section
#define elf_backend_check_relocs elf32_msp430_check_relocs
#define elf_backend_can_gc_sections 1
#define elf_backend_final_write_processing bfd_elf_msp430_final_write_processing
#define elf_backend_object_p elf32_msp430_object_p
#define bfd_elf32_bfd_relax_section msp430_elf_relax_section
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
#define bfd_elf32_bfd_is_target_special_symbol msp430_elf_is_target_special_symbol
#undef elf32_bed
#define elf32_bed elf32_msp430_bed
#include "elf32-target.h"
/* The TI compiler sets the OSABI field to ELFOSABI_NONE. */
#undef TARGET_LITTLE_SYM
bfd target vector rationalisation This renames the bfd targets to <cpu>_<format>_<other>_<endian>_vec. So for example, bfd_elf32_ntradlittlemips_vec becomes mips_elf32_ntrad_le_vec and hp300bsd_vec becomes m68k_aout_hp300bsd_vec. bfd/ * aix386-core.c, * aout-adobe.c, * aout-arm.c, * aout-ns32k.c, * aout-sparcle.c, * aout0.c, * aoutx.h, * armnetbsd.c, * bout.c, * cf-i386lynx.c, * cf-sparclynx.c, * cisco-core.c, * coff-alpha.c, * coff-apollo.c, * coff-arm.c, * coff-aux.c, * coff-go32.c, * coff-h8300.c, * coff-h8500.c, * coff-i386.c, * coff-i860.c, * coff-i960.c, * coff-m68k.c, * coff-m88k.c, * coff-mips.c, * coff-rs6000.c, * coff-sh.c, * coff-sparc.c, * coff-stgo32.c, * coff-svm68k.c, * coff-tic80.c, * coff-u68k.c, * coff-w65.c, * coff-we32k.c, * coff-x86_64.c, * coff-z80.c, * coff-z8k.c, * coff64-rs6000.c, * config.bfd, * configure.com, * configure.in, * demo64.c, * elf-m10200.c, * elf-m10300.c, * elf32-am33lin.c, * elf32-arc.c, * elf32-arm.c, * elf32-avr.c, * elf32-bfin.c, * elf32-cr16.c, * elf32-cr16c.c, * elf32-cris.c, * elf32-crx.c, * elf32-d10v.c, * elf32-d30v.c, * elf32-dlx.c, * elf32-epiphany.c, * elf32-fr30.c, * elf32-frv.c, * elf32-gen.c, * elf32-h8300.c, * elf32-hppa.c, * elf32-i370.c, * elf32-i386.c, * elf32-i860.c, * elf32-i960.c, * elf32-ip2k.c, * elf32-iq2000.c, * elf32-lm32.c, * elf32-m32c.c, * elf32-m32r.c, * elf32-m68hc11.c, * elf32-m68hc12.c, * elf32-m68k.c, * elf32-m88k.c, * elf32-mcore.c, * elf32-mep.c, * elf32-metag.c, * elf32-microblaze.c, * elf32-mips.c, * elf32-moxie.c, * elf32-msp430.c, * elf32-mt.c, * elf32-nds32.c, * elf32-nios2.c, * elf32-or1k.c, * elf32-pj.c, * elf32-ppc.c, * elf32-rl78.c, * elf32-rx.c, * elf32-s390.c, * elf32-score.c, * elf32-sh-symbian.c, * elf32-sh.c, * elf32-sh64.c, * elf32-sparc.c, * elf32-spu.c, * elf32-tic6x.c, * elf32-tilegx.c, * elf32-tilepro.c, * elf32-v850.c, * elf32-vax.c, * elf32-xc16x.c, * elf32-xgate.c, * elf32-xstormy16.c, * elf32-xtensa.c, * elf64-alpha.c, * elf64-gen.c, * elf64-hppa.c, * elf64-ia64-vms.c, * elf64-mips.c, * elf64-mmix.c, * elf64-ppc.c, * elf64-s390.c, * elf64-sh64.c, * elf64-sparc.c, * elf64-tilegx.c, * elf64-x86-64.c, * elfn32-mips.c, * elfnn-aarch64.c, * elfnn-ia64.c, * epoc-pe-arm.c, * epoc-pei-arm.c, * hp300bsd.c, * hp300hpux.c, * hppabsd-core.c, * hpux-core.c, * i386aout.c, * i386bsd.c, * i386dynix.c, * i386freebsd.c, * i386linux.c, * i386lynx.c, * i386mach3.c, * i386msdos.c, * i386netbsd.c, * i386os9k.c, * irix-core.c, * m68k4knetbsd.c, * m68klinux.c, * m68knetbsd.c, * m88kmach3.c, * m88kopenbsd.c, * mach-o-i386.c, * mach-o-x86-64.c, * makefile.vms, * mipsbsd.c, * mmo.c, * netbsd-core.c, * newsos3.c, * nlm32-alpha.c, * nlm32-i386.c, * nlm32-ppc.c, * nlm32-sparc.c, * ns32knetbsd.c, * osf-core.c, * pc532-mach.c, * pe-arm-wince.c, * pe-arm.c, * pe-i386.c, * pe-mcore.c, * pe-mips.c, * pe-ppc.c, * pe-sh.c, * pe-x86_64.c, * pei-arm-wince.c, * pei-arm.c, * pei-i386.c, * pei-ia64.c, * pei-mcore.c, * pei-mips.c, * pei-ppc.c, * pei-sh.c, * pei-x86_64.c, * ppcboot.c, * ptrace-core.c, * riscix.c, * sco5-core.c, * som.c, * sparclinux.c, * sparclynx.c, * sparcnetbsd.c, * sunos.c, * targets.c, * trad-core.c, * vax1knetbsd.c, * vaxbsd.c, * vaxnetbsd.c, * versados.c, * vms-alpha.c, * vms-lib.c: Rename bfd targets to <cpu>_<format>_<other>_<endian>_vec. Adjust associated MY macros on aout targets. * configure: Regenerate. binutils/ * emul_aix.c: Update bfd target vector naming. * testsuite/binutils-all/objcopy.exp: Likewise. ld/ * emultempl/metagelf.em: Update bfd target vector naming. * emultempl/nios2elf.em: Likewise. * emultempl/spuelf.em: Likewise. * emultempl/tic6xdsbt.em: Likewise.
2014-05-02 12:39:40 +02:00
#define TARGET_LITTLE_SYM msp430_elf32_ti_vec
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
#undef elf32_bed
#define elf32_bed elf32_msp430_ti_bed
2015-08-12 13:32:43 +02:00
#undef ELF_OSABI
* archures.c: Add some more MSP430 machine numbers. * config.bfd (msp430): Define targ_selvecs. * configure.in: Add bfd_elf32_msp430_ti_vec. * cpu-msp430.c: Add some more MSP430 machine numbers. * elf32-msp430.c Add support for MSP430X relocations. Add support for TI compiler generated relocations. Add support for sym_diff relocations. Add support for relaxing out of range short branches into long branches. Add support for MSP430 attribute section. * reloc.c: Add MSP430X relocations. * targets.c: Add bfd_elf32_msp430_ti_vec. * bfd-in2.h: Regenerate. * configure: Regenerate. * libbfd.h: Regenerate. * readelf.c: Add support for MSP430X architecture. * readelf.exp: Expect -wi test to fail for the MSP430. * config/tc-msp430.c: Add support for the MSP430X architecture. Add code to insert a NOP instruction after any instruction that might change the interrupt state. Add support for the LARGE memory model. Add code to initialise the .MSP430.attributes section. * config/tc-msp430.h: Add support for the MSP430X architecture. * doc/c-msp430.texi: Document the new -mL and -mN command line options. * NEWS: Mention support for the MSP430X architecture. * gas/all/gas.exp: Skip the DIFF1 test for the MSP430. Expect the FORWARD test to pass for the MSP430. Skip the REDEF tests for the MSP430. Expect the 930509A test to fail for the MSP430. * gas/all/sleb128-4.d: Skip for the MSP430. * gas/elf/elf.exp: Set target_machine to msp430 for the MSP430. Skip the EHOPT0 test for the MSP430. Skip the REDEF and EQU-RELOC tests for the MSP430. * gas/elf/section2.e-msp430: New file. * gas/lns/lns-big-delta.d: Remove expectation of 20-bit addresses. * gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430. * gas/msp430/msp430x.s: New test. * gas/msp430/msp430x.d: Expected disassembly. * gas/msp430/msp430.exp: Run new test. * gas/msp430/opcode.d: Update expected disassembly. * msp430.h: Add MSP430X relocs. Add some more MSP430 machine numbers. Add values used by .MSP430.attributes section. * msp430.h: Add patterns for MSP430X instructions. * Makefile.am: Add emsp430X.c * Makefine.in: Regenerate. * configure.tgt (msp430): Add msp430X emulation. * ldmain.c (multiple_definition): Only disable relaxation if it was enabled by the user. * ldmain.h (RELAXATION_ENABLED_BY_USER): New macro. * emulparams/msp430all.sh: Add support for MSP430X. * emultempl/generic.em: (before_parse): Enable relaxation for the MSP430. * scripttempl/msp430.sc: Reorganize sections. Add .rodata section. * scripttempl/msp430_3.sc: Likewise. * NEWS: Mention support for MSP430X. * ld-elf/flags1.d: Expect this test to pass on the MSP430. * ld-elf/init-fini-arrays.d: Expect this test to fail on the MSP430. * ld-elf/merge.d: Expect this test to pass on the MSP430. * ld-elf/sec64k.exp: Skip these tests for the MSP430. * ld-gc/pr13683.d: Expect this test to fail on the MSP430. * ld-srec/srec.exp: Expect these tests to fail on the MSP430. * ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to fail on the MSP430. * msp430-dis.c: Add support for MSP430X instructions.
2013-05-02 23:06:15 +02:00
#define ELF_OSABI ELFOSABI_NONE
static const struct bfd_elf_special_section msp430_ti_elf_special_sections[] =
{
/* prefix, prefix_length, suffix_len, type, attributes. */
{ STRING_COMMA_LEN (".TI.symbol.alias"), 0, SHT_MSP430_SYM_ALIASES, 0 },
{ STRING_COMMA_LEN (".TI.section.flags"), 0, SHT_MSP430_SEC_FLAGS, 0 },
{ STRING_COMMA_LEN ("_TI_build_attrib"), 0, SHT_MSP430_ATTRIBUTES, 0 },
{ NULL, 0, 0, 0, 0 }
};
2002-12-30 20:25:13 +01:00
#include "elf32-target.h"