OpenE2K
/
binutils-gdb
12
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
binutils-gdb/sim/rx/ChangeLog

224 lines
6.5 KiB
Plaintext
Raw Normal View History

Define PACKAGE macro in all sims' config.h. Some of the common includes in include/gdb such as callback.h include bfd.h. But there was a recent change in bfd-in.h to require that config.h be included before bfd.h can be included: /* PR 14072: Ensure that config.h is included first. */ #if !defined PACKAGE && !defined PACKAGE_VERSION #error config.h must be included before this header #endif PACKAGE_VERSION is always defined by default by the AC_INIT autoconf macro, but PACKAGE isn't. This patch updates the SIM_AC_COMMON macro to define it, and then regenerates all configure scripts and config.in files. sim/common/changeLog: * acinclude.m4 (SIM_AC_COMMON): Define PACKAGE. * config.in, configure: Regenerate. sim/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * config.in, configure: Regenerate. sim/avr/ChangeLog: * config.in, configure: Regenerate. sim/bfin/ChangeLog: * config.in, configure: Regenerate. sim/cr16/ChangeLog: * config.in, configure: Regenerate. sim/cris/ChangeLog: * config.in, configure: Regenerate. sim/d10v/ChangeLog: * config.in, configure: Regenerate. sim/erc32/ChangeLog: * config.in, configure: Regenerate. sim/frv/ChangeLog: * config.in, configure: Regenerate. sim/h8300/ChangeLog: * config.in, configure: Regenerate. sim/iq2000/ChangeLog: * config.in, configure: Regenerate. sim/lm32/ChangeLog: * config.in, configure: Regenerate. sim/m32c/ChangeLog: * config.in, configure: Regenerate. sim/m32r/ChangeLog: * config.in, configure: Regenerate. sim/m68hc11/ChangeLog: * config.in, configure: Regenerate. sim/mcore/ChangeLog: * config.in, configure: Regenerate. sim/microblaze/ChangeLog: * config.in, configure: Regenerate. sim/mips/ChangeLog: * config.in, configure: Regenerate. sim/mn10300/ChangeLog: * config.in, configure: Regenerate. sim/moxie/ChangeLog: * config.in, configure: Regenerate. sim/ppc/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * config.in, configure: Regenerate. sim/rx/ChangeLog: * config.in, configure: Regenerate. sim/sh/ChangeLog: * config.in, configure: Regenerate. sim/sh64/ChangeLog: * config.in, configure: Regenerate. sim/v850/ChangeLog: * config.in, configure: Regenerate. sim/testsuite/ChangeLog: * configure: Regenerate.
2012-06-15 19:20:10 +02:00
2012-06-15 Joel Brobecker <brobecker@adacore.com>
* config.in, configure: Regenerate.
gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. gdb/gdbserver/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. include/gdb/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 * gdb/signals.def: Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/arm/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/avr/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/common/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/cr16/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/d10v/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/erc32/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/m32c/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/ppc/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/rl78/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. sim/rx/ 2012-05-24 Pedro Alves <palves@redhat.com> PR gdb/7205 Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
2012-05-24 18:51:47 +02:00
2012-05-24 Pedro Alves <palves@redhat.com>
PR gdb/7205
Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout.
[PATCH] sim: make sure to include strsignal prototype Before POSIX standardized strsignal(), old systems would hide the prototype unless the normal extension defines were enabled. So use the AC_USE_SYSTEM_EXTENSIONS helper for that. Then make sure we include string.h ourselves in nrun.c rather than relying on implicit includes via other sim headers. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-24 06:38:43 +01:00
2012-03-24 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4, config.in, configure: Regenerate.
sim: rx: fix warnings with AC_DEFINE This lets `autoheader` work again. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-03-23 05:00:59 +01:00
2012-03-22 Mike Frysinger <vapier@gentoo.org>
* configure.ac (CYCLE_ACCURATE): Add template with AC_DEFINE call.
(CYCLE_STATS): Likewise.
Update rx sim so that it'll print load statistics.
2012-03-03 02:23:45 +01:00
2012-03-02 Kevin Buettner <kevinb@redhat.com>
* load.h (rx_load): Add `callback' parameter to function prototype.
(gdb/callback.h): Include.
* load.c (load.h): Include.
(xprintf, find_section_name_by_offset): New functions.
(rx_load): Add `callback' parameter. Add code for printing
section loaded using GDB's printf facilities.
* gdb-if.c (sim_load, sim_create_inferior): Update calls to
rx_load().
* main.c (main): Likewise.
* syscalls.c, syscalls.h (get_callbacks): New function.
sim: generate build dependencies on the fly Lift the code that GDB is using to generate dependencies on the fly and port it over to the sim. Now people shouldn't have to manually maintain these in their Makefile's. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-12-03 19:23:51 +01:00
2011-12-03 Mike Frysinger <vapier@gentoo.org>
* aclocal.m4: New file.
* configure: Regenerate.
sim: rename common/aclocal.m4 to common/acinclude.m4 Automake likes to dump macros automatically used into the aclocal.m4 file, but the common/aclocal.m4 naming prevents that. So rename it to the more normal "acinclude.m4" so the aclocal tool can work. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18 02:31:00 +02:00
2011-10-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change include to common/acinclude.m4.
sim: move from common.m4 to SIM_AC_COMMON Now that the sourceware tree generally requires autoconf-2.64, update the sim tree to require that too. This allows us to drop the long standing SIM_AC_COMMON/common.m4 workaround as autoconf 2.64+ seems to work for me. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18 02:17:24 +02:00
2011-10-17 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
call. Replace common.m4 include with SIM_AC_COMMON.
* configure: Regenerate.
sim: m32c/rx: rename configure.in to match rest of the tree The sim dir has 30 configure.ac files and 2 configure.in files. So rename the minority to be consistent. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-07-11 21:00:17 +02:00
2011-07-11 Mike Frysinger <vapier@gentoo.org>
* configure.ac: Rename from configure.in.
sim: m32c/rx: fix typo in copyright updating
2011-07-11 20:45:45 +02:00
2011-07-11 Mike Frysinger <vapier@gentoo.org>
* configure.in: Add "dnl" before copyright notice.
sim: add sim_complete_command stubs for non-common-using ports For the ports that don't use the common/ subdir, we need to add stub funcs to them to avoid build failures with gdb and command completion. These do not implement the actual completion functionality ... any port that wants that can either convert to the common/ subdir, or fill out the function on their own time. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-04-16 20:16:36 +02:00
2011-04-16 Mike Frysinger <vapier@gentoo.org>
* gdb-if.c (sim_complete_command): New stub function.
http://sourceware.org/ml/gdb-patches/2010-11/msg00112.html gdb/ChangeLog * remote-sim.c (gdbsim_store_register): Update API to sim_store_register to check more error conditions. include/gdb/ChangeLog * remote-sim.h (sim_store_register): Update the API documentation for this function. sim/erc32/ChangeLog sim/h8300/ChangeLog sim/m32c/ChangeLog sim/mn10300/ChangeLog sim/ppc/ChangeLog sim/rx/ChangeLog sim/v850/ChangeLog * ???.c (sim_store_register): Update return value to match new API.
2011-01-11 15:19:34 +01:00
2011-01-11 Andrew Burgess <aburgess@broadcom.com>
* gdb-if.c (sim_store_register): Update return value to
match new API.
* rx.c (decode_opcode): For "MVFC PC,", use the address of the opcode, not the address following the opcode.
2010-12-15 00:12:20 +01:00
2010-12-14 DJ Delorie <dj@redhat.com>
* rx.c (decode_opcode): For "MVFC PC,", use the address of the
opcode, not the address following the opcode.
(decode_opcode): RXO_branchrel is relative to the opcode's PC, not the address following the opcode.
2010-12-15 00:39:03 +01:00
(decode_opcode): RXO_branchrel is relative to the opcode's PC, not
the address following the opcode.
* rx.c (decode_opcode): For "MVFC PC,", use the address of the opcode, not the address following the opcode.
2010-12-15 00:12:20 +01:00
* rx.c (lsb_count): New. (divu_cycles): New. (div_cycles): New. (decode_opcode): Fix cycle count math for div, divu, suntil, and swhile.
2010-11-12 02:01:12 +01:00
2010-11-11 DJ Delorie <dj@redhat.com>
* rx.c (lsb_count): New.
(divu_cycles): New.
(div_cycles): New.
(decode_opcode): Fix cycle count math for div, divu, suntil, and
swhile.
* mem.c (rx_mem_ptr): When invalidating the decode cache, account for the fact that the instruction decoder never uses swapped addresses.
2010-09-30 02:03:23 +02:00
2010-09-29 Kevin Buettner <kevinb@redhat.com>
* mem.c (rx_mem_ptr): When invalidating the decode cache, account
for the fact that the instruction decoder never uses swapped
addresses.
* rx.c (decode_opcode: RXO_int): Only break out of the emulation loop if rx_syscall() does not return a RX_STEPPED result.
2010-09-29 17:47:45 +02:00
2010-09-29 Nick Clifton <nickc@redhat.com>
* rx.c (decode_opcode: RXO_int): Only break out of the emulation
loop if rx_syscall() does not return a RX_STEPPED result.
* rx.c (decode_opcode): Add cycle information for RXO_smovu.
2010-09-24 07:18:23 +02:00
2010-09-23 Kevin Buettner <kevinb@redhat.com>
* rx.c (decode_opcode): Add cycle information for RXO_smovu.
* fpu.c, gdb-if.c, load.c, misc.c, syscalls.c (config.h): Include.
2010-09-24 01:05:28 +02:00
2010-09-23 Kevin Buettner <kevinb@redhat.com>
* fpu.c, gdb-if.c, load.c, misc.c, syscalls.c (config.h): Include.
Fix typo in ChangeLog entry.
2010-09-24 06:45:08 +02:00
* rx.c (decode_opcode): Declare `tx' as unsigned.
* rx.c (decode_opcode): Declare `rx' as unsigned.
2010-09-24 01:26:42 +02:00
* cpu.h (reset_decoder): Declare. * load.c (rx_load): Call `reset_decoder'. * rx.c (reset_decoder): New function.
2010-09-24 01:42:53 +02:00
* cpu.h (reset_decoder): Declare.
* load.c (rx_load): Call `reset_decoder'.
* rx.c (reset_decoder): New function.
[include/opcode] * rx.h (RX_Operand_Type): Add TwoReg. (RX_Opcode_ID): Remove ediv and ediv2. [opcodes] * rx-decode.opc (SRR): New. (rx_decode_opcode): Use it for movbi and movbir. Decode NOP2 (mov r0,r0) and NOP3 (max r0,r0) special cases. * rx-decode.c: Regenerate. [sim/rx] * rx.c (decode_cache_base): New. (id_names): Remove ediv and edivu. (optype_names): Add TwoReg. (maybe_get_mem_page): New. (rx_get_byte): Call it. (get_op): Add TwoReg support. (put_op): Likewise. (PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode" is a pointer now. (DO_RETURN): New. We use longjmp to return an exception result. (decode_opcode): Make opcode a pointer to the decode cache. Save decoded opcode information and re-use. Call DO_RETURN instead of return throughout. Remove ediv and edivu. * mem.c (ptdc): New. Adds decode cache. (rx_mem_ptr): Support it. (rx_mem_decode_cache): New. * mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE. (rx_mem_decode_cache): Declare. * gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here... * main.c (main): ...and here. Use a fast loop if neither trace nor disassemble is given. * cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED, RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a valid code for anything.
2010-07-29 20:41:28 +02:00
2010-07-29 DJ Delorie <dj@redhat.com>
* rx.c (decode_cache_base): New.
(id_names): Remove ediv and edivu.
(optype_names): Add TwoReg.
(maybe_get_mem_page): New.
(rx_get_byte): Call it.
(get_op): Add TwoReg support.
(put_op): Likewise.
(PD, PS, PS2, GD, GS, GS2, DSZ, SSZ, S2SZ, US1, US2, OM): "opcode"
is a pointer now.
(DO_RETURN): New. We use longjmp to return an exception result.
(decode_opcode): Make opcode a pointer to the decode cache. Save
decoded opcode information and re-use. Call DO_RETURN instead of
return throughout. Remove ediv and edivu.
* mem.c (ptdc): New. Adds decode cache.
(rx_mem_ptr): Support it.
(rx_mem_decode_cache): New.
* mem.h (enum mem_ptr_action): add MPA_DECODE_CACHE.
(rx_mem_decode_cache): Declare.
* gdb-if.c (sim_resume): Add decode_opcode's setjmp logic here...
* main.c (main): ...and here. Use a fast loop if neither trace
nor disassemble is given.
* cpu.h (RX_MAKE_STEPPED, RX_MAKE_HIT_BREAK, RX_MAKE_EXITED,
RX_MAKE_STOPPED, RX_EXITED, RX_STOPPED): Adjust so that 0 is not a
valid code for anything.
[sim/rx] * README.txt: New. * config.h (CYCLE_ACCURATE, CYCLE_STATS): New. * configure.in (--enable-cycle-accurate, --enable-cycle-stats): New. Default to enabled. * configure: Regenerate. * cpu.h (regs_type): Add cycle tracking info. (reset_pipeline_stats): Declare. (halt_pipeline_stats): Declare. (pipeline_stats): Declare. * main.c (done): Call pipeline_stats(). * mem.h (rx_mem_ptr): Moved to here ... * mem.c (mem_ptr): ... from here. Rename throughout. (mem_put_byte): Move LEDs to Port A. Add Port B to control cycle statistics. Move UART to SCI4. (mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles. * reg.c (init_regs): Set Rt reg to -1 (no reg). * rx.c: Add cycle counting and statistics throughout. (rx_get_byte): Optimize for speed. (decode_opcode): Likewise. (reset_pipeline_stats): New. (halt_pipeline_stats): New. (pipeline_stats): New. * trace.c (sim_disasm_one): Print cycle count. [include/opcode] * rx.h (RX_Opcode_ID): Add nop2 and nop3 for statistics.
2010-07-28 23:58:22 +02:00
2010-07-27 DJ Delorie <dj@redhat.com>
* README.txt: New.
* config.h (CYCLE_ACCURATE, CYCLE_STATS): New.
* configure.in (--enable-cycle-accurate, --enable-cycle-stats):
New. Default to enabled.
* configure: Regenerate.
* cpu.h (regs_type): Add cycle tracking info.
(reset_pipeline_stats): Declare.
(halt_pipeline_stats): Declare.
(pipeline_stats): Declare.
* main.c (done): Call pipeline_stats().
* mem.h (rx_mem_ptr): Moved to here ...
* mem.c (mem_ptr): ... from here. Rename throughout.
(mem_put_byte): Move LEDs to Port A. Add Port B to control cycle
statistics. Move UART to SCI4.
(mem_put_hi): Add TPU 1-2. TPU 1 and 2 count CPU cycles.
* reg.c (init_regs): Set Rt reg to -1 (no reg).
* rx.c: Add cycle counting and statistics throughout.
(rx_get_byte): Optimize for speed.
(decode_opcode): Likewise.
(reset_pipeline_stats): New.
(halt_pipeline_stats): New.
(pipeline_stats): New.
* trace.c (sim_disasm_one): Print cycle count.
* gdb-if.c (sim_store_register): Add case for sim_rx_acc_regnum.
2010-07-08 01:22:43 +02:00
2010-07-07 Kevin Buettner <kevinb@redhat.com>
* gdb-if.c (sim_store_register): Add case for sim_rx_acc_regnum.
Add "acc" register. Revise register order and names.
2010-06-24 22:38:05 +02:00
2010-06-24 Kevin Buettner <kevinb@redhat.com>
* gdb-if.c (trace.h): Include.
(reg_size, sim_fetch_register): Add cases for sim_rx_acc_regnum.
oops - omitted from previous delta
2010-06-08 12:15:48 +02:00
2010-06-07 Nick Clifton <nickc@redhat.com>
* reg.c (set_oszc): Use unsigned int for the mask.
(set_szc, set_osz, set_sz): Likewise.
* gdb-if.c (sim_do_command): Add a "sim verbose noisy" command.
2010-05-28 19:10:32 +02:00
2010-05-28 Kevin Buettner <kevinb@redhat.com>
* gdb-if.c (sim_do_command): Add a "sim verbose noisy" command.
sim: constify sim_write source buffer (part 2) As pointed out by Sandra Loosemore, a bunch of targets define sim_write themselves instead of using the common/ code. So constify them too. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2010-04-14 09:38:06 +02:00
2010-04-14 Mike Frysinger <vapier@gentoo.org>
* gdb-if.c (sim_write): Add const to buf arg.
* configure.in: Check if the host has getopt.h. * configure: Regenerate. * config.in: Regenerate. * main.c: Include config.h. Use HAVE_STDLIB_H, HAVE_UNISTD_H, HAVE_GETOPT_H. Include getopt.h in case HAVE_GETOPT_H is defined.
2010-02-14 08:37:11 +01:00
2010-01-30 Masaki Muranaka <monaka@monami-software.com>
* configure.in: Check if the host has getopt.h.
* configure: Regenerate.
* config.in: Regenerate.
* main.c: Include config.h.
Use HAVE_STDLIB_H, HAVE_UNISTD_H, HAVE_GETOPT_H.
Include getopt.h in case HAVE_GETOPT_H is defined.
* rx/rx.c (decode_opcode): btst bit address mask fix.
2009-12-23 04:51:47 +01:00
2009-12-22 Yoshinori Sato <ysato@users.sourceforge.jp>
* rx/rx.c (decode_opcode): btst bit address mask fix.
* rx/rx.c (decode_opcode): fix SWHILE logic.
2009-12-01 00:37:39 +01:00
2009-11-30 DJ Delorie <dj@redhat.com>
* rx/rx.c (decode_opcode): fix SWHILE logic.
[sim] * rx: New directory. * configure.ac: Add entry for Renesas RX. * configure: Regenerate. [include/gdb] * sim-rx.h: New.
2009-11-24 20:22:45 +01:00
2009-10-27 DJ Delorie <dj@redhat.com>
Kevin Buettner <kevinb@redhat.com>
* load.h: New.
* rx.c: New.
* syscalls.c: New.
* syscalls.h: New.
* load.c: New.
* configure.in: New.
* gdb-if.c: New.
* err.c: New.
* cpu.h: New.
* Makefile.in: New.
* fpu.c: New.
* mem.c: New.
* config.in: New.
* err.h: New.
* reg.c: New.
* mem.h: New.
* main.c: New.
* misc.h: New.
* trace.c: New.
* misc.c: New.
* syscall.h: New.
* trace.h: New.
* fpu.h: New.