s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* Target-dependent code for GNU/Linux on s390.
|
2002-02-24 23:31:19 +01:00
|
|
|
|
2018-01-01 05:43:02 +01:00
|
|
|
Copyright (C) 2001-2018 Free Software Foundation, Inc.
|
2002-02-24 23:31:19 +01:00
|
|
|
|
2001-10-14 00:13:35 +02:00
|
|
|
Contributed by D.J. Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
|
|
|
|
for IBM Deutschland Entwicklung GmbH, IBM Corporation.
|
|
|
|
|
|
|
|
This file is part of GDB.
|
|
|
|
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
|
|
it under the terms of the GNU General Public License as published by
|
2007-08-23 20:08:50 +02:00
|
|
|
the Free Software Foundation; either version 3 of the License, or
|
2001-10-14 00:13:35 +02:00
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
2007-08-23 20:08:50 +02:00
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>. */
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
#include "defs.h"
|
2018-01-23 13:37:44 +01:00
|
|
|
|
|
|
|
#include "auxv.h"
|
|
|
|
#include "elf/common.h"
|
|
|
|
#include "frame-base.h"
|
|
|
|
#include "frame-unwind.h"
|
|
|
|
#include "gdbarch.h"
|
2001-10-14 00:13:35 +02:00
|
|
|
#include "gdbcore.h"
|
2018-01-23 13:37:44 +01:00
|
|
|
#include "linux-record.h"
|
|
|
|
#include "linux-tdep.h"
|
2001-10-14 00:13:35 +02:00
|
|
|
#include "objfiles.h"
|
2018-01-23 13:37:43 +01:00
|
|
|
#include "osabi.h"
|
2001-10-14 00:13:35 +02:00
|
|
|
#include "regcache.h"
|
2018-01-23 13:37:44 +01:00
|
|
|
#include "record-full.h"
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
#include "regset.h"
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
#include "s390-tdep.h"
|
2013-10-30 18:57:08 +01:00
|
|
|
#include "s390-linux-tdep.h"
|
2018-01-23 13:37:44 +01:00
|
|
|
#include "solib-svr4.h"
|
|
|
|
#include "target.h"
|
|
|
|
#include "trad-frame.h"
|
2014-01-22 18:54:43 +01:00
|
|
|
#include "xml-syscall.h"
|
2001-10-14 00:13:35 +02:00
|
|
|
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
#include "features/s390-linux32v1.c"
|
|
|
|
#include "features/s390-linux32v2.c"
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
#include "features/s390-linux64.c"
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
#include "features/s390-linux64v1.c"
|
|
|
|
#include "features/s390-linux64v2.c"
|
2013-09-13 16:17:31 +02:00
|
|
|
#include "features/s390-te-linux64.c"
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
#include "features/s390-vx-linux64.c"
|
|
|
|
#include "features/s390-tevx-linux64.c"
|
2017-09-25 16:02:23 +02:00
|
|
|
#include "features/s390-gs-linux64.c"
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
#include "features/s390x-linux64v1.c"
|
|
|
|
#include "features/s390x-linux64v2.c"
|
2013-09-13 16:17:31 +02:00
|
|
|
#include "features/s390x-te-linux64.c"
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
#include "features/s390x-vx-linux64.c"
|
|
|
|
#include "features/s390x-tevx-linux64.c"
|
2017-09-25 16:02:23 +02:00
|
|
|
#include "features/s390x-gs-linux64.c"
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
|
2014-01-22 18:54:43 +01:00
|
|
|
#define XML_SYSCALL_FILENAME_S390 "syscalls/s390-linux.xml"
|
|
|
|
#define XML_SYSCALL_FILENAME_S390X "syscalls/s390x-linux.xml"
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
|
|
|
|
/* Register handling. */
|
|
|
|
|
|
|
|
/* Implement cannot_store_register gdbarch method. */
|
|
|
|
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
static int
|
|
|
|
s390_cannot_store_register (struct gdbarch *gdbarch, int regnum)
|
|
|
|
{
|
|
|
|
/* The last-break address is read-only. */
|
|
|
|
return regnum == S390_LAST_BREAK_REGNUM;
|
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Implement write_pc gdbarch method. */
|
|
|
|
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
static void
|
|
|
|
s390_write_pc (struct regcache *regcache, CORE_ADDR pc)
|
|
|
|
{
|
2017-10-25 17:37:03 +02:00
|
|
|
struct gdbarch *gdbarch = regcache->arch ();
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
|
|
|
|
regcache_cooked_write_unsigned (regcache, tdep->pc_regnum, pc);
|
|
|
|
|
|
|
|
/* Set special SYSTEM_CALL register to 0 to prevent the kernel from
|
|
|
|
messing with the PC we just installed, if we happen to be within
|
|
|
|
an interrupted system call that the kernel wants to restart.
|
|
|
|
|
|
|
|
Note that after we return from the dummy call, the SYSTEM_CALL and
|
|
|
|
ORIG_R2 registers will be automatically restored, and the kernel
|
|
|
|
continues to restart the system call at this point. */
|
|
|
|
if (register_size (gdbarch, S390_SYSTEM_CALL_REGNUM) > 0)
|
|
|
|
regcache_cooked_write_unsigned (regcache, S390_SYSTEM_CALL_REGNUM, 0);
|
|
|
|
}
|
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* Maps for register sets. */
|
2016-01-23 23:53:41 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_gregmap[] =
|
|
|
|
{
|
|
|
|
{ 1, S390_PSWM_REGNUM },
|
|
|
|
{ 1, S390_PSWA_REGNUM },
|
|
|
|
{ 16, S390_R0_REGNUM },
|
|
|
|
{ 16, S390_A0_REGNUM },
|
|
|
|
{ 1, S390_ORIG_R2_REGNUM },
|
|
|
|
{ 0 }
|
|
|
|
};
|
2016-01-23 23:53:41 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_fpregmap[] =
|
|
|
|
{
|
|
|
|
{ 1, S390_FPC_REGNUM, 8 },
|
|
|
|
{ 16, S390_F0_REGNUM, 8 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
2016-01-23 23:53:41 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_regmap_upper[] =
|
|
|
|
{
|
|
|
|
{ 16, S390_R0_UPPER_REGNUM, 4 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
2016-01-23 23:53:41 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_regmap_last_break[] =
|
|
|
|
{
|
|
|
|
{ 1, REGCACHE_MAP_SKIP, 4 },
|
|
|
|
{ 1, S390_LAST_BREAK_REGNUM, 4 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
2016-01-23 23:53:41 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390x_regmap_last_break[] =
|
|
|
|
{
|
|
|
|
{ 1, S390_LAST_BREAK_REGNUM, 8 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_regmap_system_call[] =
|
|
|
|
{
|
|
|
|
{ 1, S390_SYSTEM_CALL_REGNUM, 4 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_regmap_tdb[] =
|
|
|
|
{
|
|
|
|
{ 1, S390_TDB_DWORD0_REGNUM, 8 },
|
|
|
|
{ 1, S390_TDB_ABORT_CODE_REGNUM, 8 },
|
|
|
|
{ 1, S390_TDB_CONFLICT_TOKEN_REGNUM, 8 },
|
|
|
|
{ 1, S390_TDB_ATIA_REGNUM, 8 },
|
|
|
|
{ 12, REGCACHE_MAP_SKIP, 8 },
|
|
|
|
{ 16, S390_TDB_R0_REGNUM, 8 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_regmap_vxrs_low[] =
|
|
|
|
{
|
|
|
|
{ 16, S390_V0_LOWER_REGNUM, 8 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_regmap_vxrs_high[] =
|
|
|
|
{
|
|
|
|
{ 16, S390_V16_REGNUM, 16 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_regmap_gs[] =
|
|
|
|
{
|
|
|
|
{ 1, REGCACHE_MAP_SKIP, 8 },
|
|
|
|
{ 1, S390_GSD_REGNUM, 8 },
|
|
|
|
{ 1, S390_GSSM_REGNUM, 8 },
|
|
|
|
{ 1, S390_GSEPLA_REGNUM, 8 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regcache_map_entry s390_regmap_gsbc[] =
|
|
|
|
{
|
|
|
|
{ 1, REGCACHE_MAP_SKIP, 8 },
|
|
|
|
{ 1, S390_BC_GSD_REGNUM, 8 },
|
|
|
|
{ 1, S390_BC_GSSM_REGNUM, 8 },
|
|
|
|
{ 1, S390_BC_GSEPLA_REGNUM, 8 },
|
|
|
|
{ 0 }
|
|
|
|
};
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* Supply the TDB regset. Like regcache_supply_regset, but invalidate
|
|
|
|
the TDB registers unless the TDB format field is valid. */
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static void
|
|
|
|
s390_supply_tdb_regset (const struct regset *regset, struct regcache *regcache,
|
|
|
|
int regnum, const void *regs, size_t len)
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
ULONGEST tdw;
|
|
|
|
enum register_status ret;
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
regcache_supply_regset (regset, regcache, regnum, regs, len);
|
|
|
|
ret = regcache_cooked_read_unsigned (regcache, S390_TDB_DWORD0_REGNUM, &tdw);
|
|
|
|
if (ret != REG_VALID || (tdw >> 56) != 1)
|
|
|
|
regcache_supply_regset (regset, regcache, regnum, NULL, len);
|
|
|
|
}
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_gregset = {
|
|
|
|
s390_gregmap,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_fpregset = {
|
|
|
|
s390_fpregmap,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
2013-09-13 16:11:15 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct regset s390_upper_regset = {
|
|
|
|
s390_regmap_upper,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_last_break_regset = {
|
|
|
|
s390_regmap_last_break,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390x_last_break_regset = {
|
|
|
|
s390x_regmap_last_break,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_system_call_regset = {
|
|
|
|
s390_regmap_system_call,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_tdb_regset = {
|
|
|
|
s390_regmap_tdb,
|
|
|
|
s390_supply_tdb_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_vxrs_low_regset = {
|
|
|
|
s390_regmap_vxrs_low,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_vxrs_high_regset = {
|
|
|
|
s390_regmap_vxrs_high,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_gs_regset = {
|
|
|
|
s390_regmap_gs,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const struct regset s390_gsbc_regset = {
|
|
|
|
s390_regmap_gsbc,
|
|
|
|
regcache_supply_regset,
|
|
|
|
regcache_collect_regset
|
|
|
|
};
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* Iterate over supported core file register note sections. */
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static void
|
|
|
|
s390_iterate_over_regset_sections (struct gdbarch *gdbarch,
|
|
|
|
iterate_over_regset_sections_cb *cb,
|
|
|
|
void *cb_data,
|
|
|
|
const struct regcache *regcache)
|
2001-10-14 00:13:35 +02:00
|
|
|
{
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
const int gregset_size = (tdep->abi == ABI_LINUX_S390 ?
|
|
|
|
s390_sizeof_gregset : s390x_sizeof_gregset);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
cb (".reg", gregset_size, &s390_gregset, NULL, cb_data);
|
|
|
|
cb (".reg2", s390_sizeof_fpregset, &s390_fpregset, NULL, cb_data);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (tdep->abi == ABI_LINUX_S390 && tdep->gpr_full_regnum != -1)
|
|
|
|
cb (".reg-s390-high-gprs", 16 * 4, &s390_upper_regset,
|
|
|
|
"s390 GPR upper halves", cb_data);
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (tdep->have_linux_v1)
|
|
|
|
cb (".reg-s390-last-break", 8,
|
|
|
|
(gdbarch_ptr_bit (gdbarch) == 32
|
|
|
|
? &s390_last_break_regset : &s390x_last_break_regset),
|
|
|
|
"s390 last-break address", cb_data);
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (tdep->have_linux_v2)
|
|
|
|
cb (".reg-s390-system-call", 4, &s390_system_call_regset,
|
|
|
|
"s390 system-call", cb_data);
|
2001-10-14 00:13:35 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* If regcache is set, we are in "write" (gcore) mode. In this
|
|
|
|
case, don't iterate over the TDB unless its registers are
|
|
|
|
available. */
|
|
|
|
if (tdep->have_tdb
|
|
|
|
&& (regcache == NULL
|
2018-05-30 20:54:35 +02:00
|
|
|
|| (REG_VALID
|
|
|
|
== regcache->get_register_status (S390_TDB_DWORD0_REGNUM))))
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
cb (".reg-s390-tdb", s390_sizeof_tdbregset, &s390_tdb_regset,
|
|
|
|
"s390 TDB", cb_data);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (tdep->v0_full_regnum != -1)
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
cb (".reg-s390-vxrs-low", 16 * 8, &s390_vxrs_low_regset,
|
|
|
|
"s390 vector registers 0-15 lower half", cb_data);
|
|
|
|
cb (".reg-s390-vxrs-high", 16 * 16, &s390_vxrs_high_regset,
|
|
|
|
"s390 vector registers 16-31", cb_data);
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
}
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* Iterate over the guarded-storage regsets if in "read" mode, or if
|
|
|
|
their registers are available. */
|
|
|
|
if (tdep->have_gs)
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (regcache == NULL
|
2018-05-30 20:54:35 +02:00
|
|
|
|| REG_VALID == regcache->get_register_status (S390_GSD_REGNUM))
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
cb (".reg-s390-gs-cb", 4 * 8, &s390_gs_regset,
|
|
|
|
"s390 guarded-storage registers", cb_data);
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (regcache == NULL
|
2018-05-30 20:54:35 +02:00
|
|
|
|| REG_VALID == regcache->get_register_status (S390_BC_GSD_REGNUM))
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
cb (".reg-s390-gs-bc", 4 * 8, &s390_gsbc_regset,
|
|
|
|
"s390 guarded-storage broadcast control", cb_data);
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
}
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Implement core_read_description gdbarch method. */
|
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static const struct target_desc *
|
|
|
|
s390_core_read_description (struct gdbarch *gdbarch,
|
|
|
|
struct target_ops *target, bfd *abfd)
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* config/s390/nm-linux.h: Update comments. Do not include "solib.h".
(KERNEL_U_ADDR, REGISTER_U_ADDR, U_REGS_OFFSET): Remove.
(FETCH_INFERIOR_REGISTERS): Define.
* config/s390/s390.mh (NATDEPFILES): Remove core-aout.o and
core-regset.o.
* config/s390/s390x.mt: Remove.
* config/s390/tm-s390.h: Remove.
* config/s390/tm-linux.h: Do not include "s390/tm-s390.h".
(TARGET_ELF64): Remove.
(SKIP_TRAMPOLINE_CODE): Do not undefine.
* configure.tgt [s390-*-*, s390x-*-*]: Merge into single
s390*-*-* case; always set gdb_target to s390.
* regformats/reg-s390.dat: Remove control registers.
* regformats/reg-s390x.dat: Likewise.
* s390-tdep.h: New file.
* s390-nat.c: Do not include <asm/processor.h> or <value.h>.
Include "inferior.h" and "s390-tdep.h".
Remove private definition of offsetof.
(s390_register_u_addr): Remove.
(regmap_gregset, regmap_fpregset): Define.
(supply_gregset, fill_gregset): Reimplement.
(supply_fpregset, fill_fpregset): Likewise.
(s390_inferior_tid): New function.
(fetch_regs, store_regs, fetch_fpregs, store_fpregs): Likewise.
(fetch_inferior_registers, store_inferior_registers): Likewise.
* s390-tdep.c: Do not define S390_TDEP. Include "defs.h" instead
of <defs.h>. Include "reggroups.h", "regset.h", and "s390-tdep.h".
Global replace of S390_GP0_REGNUM by S390_R0_REGNUM.
Global replace of S390_FP0_REGNUM by S390_F0_REGNUM.
(struct gdbarch_tdep): Define.
(struct s390_register_info): Define.
(s390_register_info): New variable.
(s390_register_name): Reimplement.
(s390_register_type): New function.
(s390_register_raw_size, s390x_register_raw_size): Remove.
(s390_cannot_fetch_register): Remove.
(s390_register_byte): Remove.
(s390_register_virtual_type, s390x_register_virtual_type): Remove.
(s390_dwarf_regmap): New variable.
(s390_dwarf_reg_to_regnum): New function.
(s390_stab_reg_to_regnum): Remove.
(s390_pseudo_register_read, s390_pseudo_register_write): New functions.
(s390x_pseudo_register_read, s390x_pseudo_register_write): Likewise.
(s390_convert_register_p): Likewise.
(s390_register_to_value, s390_value_to_register): Likewise.
(s390_register_reggroup_p): Likewise.
(s390_regmap_gregset, s390x_regmap_gregset, s390_regmap_fpregset,
s390_gregset, s390x_gregset, s390_fpregset): New variables.
(s390_supply_regset, s390_regset_from_core_section): New functions.
(GDB_TARGET_IS_ESAME): Move here from tm-s390.h.
(S390_FPR_SIZE): Likewise.
(S390_GPR_SIZE): Likewise. Redefine in terms of GDB_TARGET_IS_ESAME.
Global replace of DEPRECATED_REGISTER_SIZE by S390_GPR_SIZE.
(S390_NUM_GPRS): Move here from tm-s390.h.
(S390_NUM_FPRS): Likewise.
(s390_in_function_epilogue_p): New function.
(s390_is_sigreturn): Replace S390_PSW_ADDR_SIZE by S390_GPR_SIZE.
Replace S390_PC_REGNUM by S390_PSWA_REGNUM.
(s390_gdbarch_init): Allocate and set up gdbarch_tdep structure.
Replace s390_stab_reg_to_regnum by s390_dwarf_reg_to_regnum.
Replace S390_FP_REGNUM by S390_SP_REGNUM.
Remove calls to:
set_gdbarch_deprecated_max_register_raw_size,
set_gdbarch_deprecated_max_register_virtual_size,
set_gdbarch_deprecated_register_byte,
set_gdbarch_cannot_fetch_register,
set_gdbarch_cannot_store_register,
set_gdbarch_deprecated_register_size,
set_gdbarch_deprecated_register_raw_size,
set_gdbarch_deprecated_register_virtual_size,
set_gdbarch_deprecated_register_virtual_type,
set_gdbarch_deprecated_register_bytes.
Add calls to:
set_gdbarch_num_pseudo_regs,
set_gdbarch_register_type,
set_gdbarch_convert_register_p,
set_gdbarch_register_to_value,
set_gdbarch_value_to_register,
set_gdbarch_register_reggroup_p,
set_gdbarch_regset_from_core_section,
set_gdbarch_pseudo_register_read,
set_gdbarch_pseudo_register_write,
set_gdbarch_in_function_epilogue_p.
* Makefile.in (s390-nat.o, s390-tdep.o): Update dependencies.
(s390_tdep_h): New variable.
2004-02-18 04:42:51 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
asection *section = bfd_get_section_by_name (abfd, ".reg");
|
|
|
|
CORE_ADDR hwcap = 0;
|
|
|
|
bool high_gprs, v1, v2, te, vx, gs;
|
2015-11-14 21:18:18 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
target_auxv_search (target, AT_HWCAP, &hwcap);
|
|
|
|
if (!section)
|
|
|
|
return NULL;
|
2015-11-14 21:18:18 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
high_gprs = (bfd_get_section_by_name (abfd, ".reg-s390-high-gprs")
|
|
|
|
!= NULL);
|
|
|
|
v1 = (bfd_get_section_by_name (abfd, ".reg-s390-last-break") != NULL);
|
|
|
|
v2 = (bfd_get_section_by_name (abfd, ".reg-s390-system-call") != NULL);
|
|
|
|
vx = (hwcap & HWCAP_S390_VX);
|
|
|
|
te = (hwcap & HWCAP_S390_TE);
|
|
|
|
gs = (hwcap & HWCAP_S390_GS);
|
2015-11-14 21:18:18 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
switch (bfd_section_size (abfd, section))
|
2015-11-14 21:18:18 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
case s390_sizeof_gregset:
|
|
|
|
if (high_gprs)
|
|
|
|
return (gs ? tdesc_s390_gs_linux64 :
|
|
|
|
te && vx ? tdesc_s390_tevx_linux64 :
|
|
|
|
vx ? tdesc_s390_vx_linux64 :
|
|
|
|
te ? tdesc_s390_te_linux64 :
|
|
|
|
v2 ? tdesc_s390_linux64v2 :
|
|
|
|
v1 ? tdesc_s390_linux64v1 : tdesc_s390_linux64);
|
2015-11-14 21:18:18 +01:00
|
|
|
else
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
return (v2 ? tdesc_s390_linux32v2 :
|
|
|
|
v1 ? tdesc_s390_linux32v1 : tdesc_s390_linux32);
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
case s390x_sizeof_gregset:
|
|
|
|
return (gs ? tdesc_s390x_gs_linux64 :
|
|
|
|
te && vx ? tdesc_s390x_tevx_linux64 :
|
|
|
|
vx ? tdesc_s390x_vx_linux64 :
|
|
|
|
te ? tdesc_s390x_te_linux64 :
|
|
|
|
v2 ? tdesc_s390x_linux64v2 :
|
|
|
|
v1 ? tdesc_s390x_linux64v1 : tdesc_s390x_linux64);
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
|
|
|
|
default:
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Frame unwinding. */
|
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
/* Signal trampoline stack frames. */
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
struct s390_sigtramp_unwind_cache {
|
|
|
|
CORE_ADDR frame_base;
|
|
|
|
struct trad_frame_saved_reg *saved_regs;
|
|
|
|
};
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Unwind THIS_FRAME and return the corresponding unwind cache for
|
|
|
|
s390_sigtramp_frame_unwind. */
|
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
static struct s390_sigtramp_unwind_cache *
|
2008-05-01 02:18:27 +02:00
|
|
|
s390_sigtramp_frame_unwind_cache (struct frame_info *this_frame,
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
void **this_prologue_cache)
|
2001-10-14 00:13:35 +02:00
|
|
|
{
|
2008-05-01 02:18:27 +02:00
|
|
|
struct gdbarch *gdbarch = get_frame_arch (this_frame);
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
int word_size = gdbarch_ptr_bit (gdbarch) / 8;
|
* defs.h (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
* gdbcore.h (read_memory_integer, safe_read_memory_integer,
read_memory_unsigned_integer, write_memory_signed_integer,
write_memory_unsigned_integer): Add BYTE_ORDER parameter.
* corefile.c (struct captured_read_memory_integer_arguments): Add
BYTE_ORDER member.
(safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
struct captured_read_memory_integer_arguments.
(do_captured_read_memory_integer): Pass it to read_memory_integer.
(read_memory_integer): Add BYTE_ORDER parameter. Pass it to
extract_signed_integer.
(read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
extract_unsigned_integer.
(write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
to store_signed_integer.
(write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
to store_unsigned_integer.
* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
Pass it to extract_unsigned_integer.
Update calls to extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer, read_memory_integer,
read_memory_unsigned_integer, safe_read_memory_integer,
write_memory_signed_integer, write_memory_unsigned_integer, and
get_target_memory_unsigned to pass byte order:
* ada-lang.c (ada_value_binop): Update.
* ada-valprint.c (char_at): Update.
* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
alpha_extract_return_value, alpha_read_insn,
alpha_get_longjmp_target): Update.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
* amd64obsd-tdep.c (amd64obsd_supply_uthread,
amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
amd64_displaced_step_fixup): Update.
* arm-linux-tdep.c (arm_linux_sigreturn_init,
arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
arm_return_value): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
* auxv.c (default_auxv_parse): Update.
* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
avr_scan_prologue, avr_extract_return_value,
avr_frame_prev_register, avr_push_dummy_call): Update.
* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
bsd_uthread_wait, bsd_uthread_thread_alive,
bsd_uthread_extra_thread_info): Update.
* c-lang.c (c_printstr, print_wchar): Update.
* cp-valprint.c (cp_print_class_member): Update.
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
cris_extract_return_value, find_step_target, dip_prefix,
sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
move_mem_to_reg_movem_op, get_data_from_address): Update.
* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
* dwarf2-frame.c (execute_cfa_program): Update.
* dwarf2loc.c (find_location_expression): Update.
* dwarf2read.c (dwarf2_const_value): Update.
* expprint.c (print_subexp_standard): Update.
* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
unsigned_address_to_pointer, address_to_signed_pointer,
read_var_value): Update.
* frame.c (frame_unwind_register_signed,
frame_unwind_register_unsigned, get_frame_memory_signed,
get_frame_memory_unsigned): Update.
* frame-unwind.c (frame_unwind_got_constant): Update.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Update.
* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
frv_extract_return_value, find_func_descr,
frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
* f-valprint.c (f_val_print): Update.
* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
Update.
* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
h8300_push_dummy_call, h8300_extract_return_value,
h8300h_extract_return_value, h8300_store_return_value,
h8300h_store_return_value): Update.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
Update.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
hppa64_hpux_in_solib_call_trampoline,
hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
hppa_hpux_sigtramp_frame_unwind_cache,
hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
hppa32_hpux_search_dummy_call_sequence,
hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
hppa_hpux_unwind_adjust_stub): Update.
* hppa-linux-tdep.c (insns_match_pattern,
hppa_linux_find_global_pointer): Update.
* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
hppa_pseudo_register_read, hppa_frame_prev_register_helper,
hppa_match_insns): Update.
* hpux-thread.c (hpux_thread_fetch_registers): Update.
* i386-tdep.c (i386bsd_sigcontext_addr): Update.
* i386-cygwin-tdep.c (core_process_module_section): Update.
* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
amd64_darwin_sstep_at_sigreturn): Update.
* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
amd64_darwin_sigcontext_addr): Likewise.
* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
* i386obsd-nat.c (i386obsd_supply_pcb): Update.
* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
i386obsd_trapframe_cache): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
i386_analyze_frame_setup, i386_analyze_prologue,
i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
i386_get_longjmp_target, i386_push_dummy_call,
i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
i386_fetch_pointer_argument): Update.
* i387-tdep.c (i387_supply_fsave): Update.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
ia64_libunwind_frame_prev_register,
ia64_libunwind_sigtramp_frame_this_id,
ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
find_extant_func_descr, find_func_descr,
ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
ia64_unwind_pc): Update.
* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
iq2000_scan_prologue, iq2000_extract_return_value,
iq2000_push_dummy_call): Update.
* irix5nat.c (fill_gregset): Update.
* jv-lang.c (evaluate_subexp_java): Update.
* jv-valprint.c (java_value_print): Update.
* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
lm32_extract_return_value, lm32_store_return_value): Update.
* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
m32c_m16c_pointer_to_address): Update.
* m32r-tdep.c (m32r_store_return_value, decode_prologue,
m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
Update.
* m68hc11-tdep.c (m68hc11_pseudo_register_read,
m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
m68hc11_push_dummy_call): Update.
* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
Update.
* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
m68k_get_longjmp_target): Update.
* m88k-tdep.c (m88k_fetch_instruction): Update.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
* mi/mi-main.c (mi_cmd_data_write_memory): Update.
* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
mips64_linux_get_longjmp_target, mips64_fill_gregset,
mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
mips_o32_push_dummy_call, mips_o64_push_dummy_call,
mips_single_step_through_delay, mips_skip_pic_trampoline_code,
mips_integer_to_address): Update.
* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
Update.
* monitor.c (monitor_supply_register, monitor_write_memory,
monitor_read_memory_single): Update.
* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
moxie_analyze_prologue): Update.
* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
mt_push_dummy_call): Update.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class, find_implementation_from_class): Update.
* ppc64-linux-tdep.c (ppc64_desc_entry_point,
ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
Update.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
ppcobsd_sigtramp_frame_cache): Update.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
ppc64_sysv_abi_return_value): Update.
* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
* procfs.c (procfs_auxv_parse): Update.
* p-valprint.c (pascal_val_print): Update.
* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
regcache_raw_write_signed, regcache_raw_write_unsigned,
regcache_cooked_read_signed, regcache_cooked_read_unsigned,
regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
* remote-m32r-sdi.c (m32r_fetch_register): Update.
* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
Update.
* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
rs6000_convert_from_func_ptr_addr, branch_dest,
rs6000_software_single_step): Update.
* rs6000-tdep.c (rs6000_in_function_epilogue_p,
ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
rs6000_frame_cache): Update.
* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
* scm-exp.c (scm_lreadr): Update.
* scm-lang.c (scm_get_field, scm_unpack): Update.
* scm-valprint.c (scm_val_print): Update.
* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
score_fetch_inst): Update.
* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
sh64_pseudo_register_read, sh64_pseudo_register_write,
sh64_frame_prev_register): Update:
* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
* solib-darwin.c (darwin_load_image_infos): Update.
* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
find_canonical_descriptor_in_load_object): Update.
* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
irix_open_symbol_file_object): Update.
* solib-som.c (som_solib_create_inferior_hook, link_map_start,
som_current_sos, som_open_symbol_file_object): Update.
* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
Update.
* solib-svr4.c (read_program_header, scan_dyntag_auxv,
solib_svr4_r_ldsomap): Update.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
sparc64obsd_collect_uthread): Update.
* sparc64-tdep.c (sparc64_pseudo_register_read,
sparc64_pseudo_register_write, sparc64_supply_gregset,
sparc64_collect_gregset): Update.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
sparc32obsd_collect_uthread): Update.
* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
sparc_collect_rwindow): Update.
* spu-linux-nat.c (parse_spufs_run): Update.
* spu-tdep.c (spu_pseudo_register_read_spu,
spu_pseudo_register_write_spu, spu_pointer_to_address,
spu_analyze_prologue, spu_in_function_epilogue_p,
spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
info_spu_dma_command, info_spu_proxydma_command): Update.
* stack.c (print_frame_nameless_args, frame_info): Update.
* symfile.c (read_target_long_array, simple_read_overlay_table,
simple_read_overlay_region_table): Update.
* target.c (debug_print_register): Update.
* tramp-frame.c (tramp_frame_start): Update.
* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
v850_extract_return_value, v850_store_return_value,
* valarith.c (value_binop, value_bit_index): Update.
* valops.c (value_cast): Update.
* valprint.c (val_print_type_code_int, val_print_string,
read_string): Update.
* value.c (unpack_long, unpack_double, unpack_field_as_long,
modify_field, pack_long): Update.
* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
vax_skip_prologue): Update.
* xstormy16-tdep.c (xstormy16_push_dummy_call,
xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
xtensa_pseudo_register_write, xtensa_frame_cache,
xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
BYTE_ORDER parameter.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
* dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
(decimal_to_string, decimal_from_integral, decimal_from_floating,
decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
Pass it to match_endianness.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters. Pass them to match_endianness.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
Pass them to match_endianness.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
Pass them to match_endianness.
* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
BYTE_ORDER_Y output parameters.
(value_binop): Update call to value_args_as_decimal.
Update calls to decimal_to_string, decimal_from_string,
decimal_from_integral, decimal_from_floating, decimal_to_doublest,
decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
to pass/receive byte order:
* c-exp.y (parse_number): Update.
* printcmd.c (printf_command): Update.
* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
value_equal, value_less): Update.
* valops.c (value_cast, value_one): Update.
* valprint.c (print_decimal_floating): Update.
* value.c (unpack_long, unpack_double): Update.
* python/python-value.c (valpy_nonzero): Update.
* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
(printstr): Update calls to char_at.
(ada_val_print_array): Likewise.
* valprint.c (read_string): Add BYTE_ORDER parameter.
(val_print_string): Update call to read_string.
* c-lang.c (c_get_string): Likewise.
* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
Use it instead of current_gdbarch.
* printcmd.c (printf_command): Update calls to target_wide_charset.
* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
Pass to target_wide_charset. Use it instead of current_gdbarch.
(classify_type): Add BYTE_ORDER parameter. Pass to
charset_for_string_type. Allow NULL encoding pointer.
(print_wchar): Add BYTE_ORDER parameter.
(c_emit_char): Update calls to classify_type and print_wchar.
(c_printchar, c_printstr): Likewise.
* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
parameter.
* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
(rs6000_skip_trampoline_code): Update call.
* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
(alpha_read_insn): Add GDBARCH parameter.
* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
(alpha_register_to_value): Pass architecture to alpha_sts.
(alpha_extract_return_value): Likewise.
(alpha_value_to_register): Pass architecture to alpha_lds.
(alpha_store_return_value): Likewise.
(alpha_read_insn): Add GDBARCH parameter.
(alpha_skip_prologue): Pass architecture to alpha_read_insn.
(alpha_heuristic_proc_start): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_next_pc): Likewise.
(alpha_sigtramp_frame_this_id): Pass architecture to
tdep->dynamic_sigtramp_offset callback.
(alpha_sigtramp_frame_sniffer): Pass architecture to
tdep->pc_in_sigtramp callback.
* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
(alphafbsd_sigtramp_offset): Likewise.
* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
parameter. Pass to alpha_read_insn.
(alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset_1.
(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset.
(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
and alpha_linux_sigtramp_offset.
* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alphanbsd_sigtramp_offset.
* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_read_insn.
(alphaobsd_sigcontext_addr): Pass architecture to
alphaobsd_sigtramp_offset.
* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
parameter.
* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
(amd64_frame_cache): Likewise.
* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
* arm-wince-tdep.c: Include "frame.h".
* avr-tdep.c (EXTRACT_INSN): Remove.
(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
(avr_skip_prologue): Pass architecture to avr_scan_prologue.
(avr_frame_unwind_cache): Likewise.
* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
(find_step_target): Initialize it.
(get_data_from_address): Add BYTE_ORDER parameter.
(bdap_prefix): Pass byte order to get_data_from_address.
(handle_prefix_assign_mode_for_aritm_op): Likewise.
(three_operand_add_sub_cmp_and_or_op): Likewise.
(handle_inc_and_index_mode_for_aritm_op): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
(frv_linux_sigcontext_reg_addr): Pass architecture to
frv_linux_pc_in_sigtramp.
(frv_linux_sigtramp_frame_sniffer): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
(h8300_analyze_prologue): Add GDBARCH parameter. Pass to
h8300_is_argument_spill.
(h8300_frame_cache, h8300_skip_prologue): Pass architecture
to h8300_analyze_prologue.
* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
in_solib_call_trampoline callback.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
parameter.
(hppa64_push_dummy_call): Pass architecture to
hppa64_convert_code_addr_to_fptr.
(hppa_match_insns): Add GDBARCH parameter.
(hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
hppa_match_insns.
(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
hppa_match_insns_relaxed.
(hppa_stub_unwind_sniffer): Pass architecture to
tdep->in_solib_call_trampoline callback.
* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
hppa_hpux_search_pattern.
* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
Pass to insns_match_pattern.
(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
hppa_linux_sigtramp_find_sigcontext.
(hppa_linux_sigtramp_frame_sniffer): Likewise.
(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
(hppa64_hpux_in_solib_call_trampoline): Likewise.
* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
(i386_analyze_frame_setup): Add GDBARCH parameter.
(i386_analyze_prologue): Add GDBARCH parameter. Pass to
i386_follow_jump and i386_analyze_frame_setup.
(i386_skip_prologue): Pass architecture to i386_analyze_prologue
and i386_follow_jump.
(i386_frame_cache): Pass architecture to i386_analyze_prologue.
(i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
frame to i386_pe_skip_trampoline_code.
* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
to sigcontext_register_address callback.
* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
(ia64_find_unwind_table): Pass architecture to
ia64_find_global_pointer.
(find_extant_func_descr): Add GDBARCH parameter.
(find_func_descr): Pass architecture to find_extant_func_descr
and ia64_find_global_pointer.
(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
tdep->sigcontext_register_address callback.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
GDBARCH parameter.
* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
lm32_analyze_prologue.
* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
(m32r_skip_prologue): Pass architecture to decode_prologue.
* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
(m68hc11_scan_prologue): Pass architecture to
m68hc11_analyze_instruction.
* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
(m68k_analyze_prologue): Pass architecture to
m68k_analyze_frame_setup.
* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
(m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
to m88k_fetch_instruction.
(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
(m88k_frame_cache): Likewise.
* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
(mep_analyze_prologue): Pass architecture to mep_get_insn.
* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
(mips32_next_pc): Pass architecture to mips_fetch_instruction.
(deal_with_atomic_sequence): Likewise.
(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
(mips16_scan_prologue): Likewise.
(mips32_scan_prologue): Likewise.
(mips16_in_function_epilogue_p): Likewise.
(mips32_in_function_epilogue_p): Likewise.
(mips_about_to_return): Likewise.
(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
(mips_skip_prologue): Pass architecture to mips16_scan_prologue
and mips32_scan_prologue.
(mips_in_function_epilogue_p): Pass architecture to
mips16_in_function_epilogue_p and
mips32_in_function_epilogue_p.
(heuristic_proc_start): Pass architecture to mips_fetch_instruction
and mips_about_to_return.
(mips_skip_mips16_trampoline_code): Pass architecture to
mips_fetch_instruction.
(fetch_mips_16): Add GDBARCH parameter.
(mips16_next_pc): Pass architecture to fetch_mips_16.
(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
fetch_mips_16.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class): Add GDBARCH parameter.
(find_implementation_from_class): Add GDBARCH parameter, pass
to read_objc_class, read_objc_methlist_nmethods, and
read_objc_methlist_method.
(find_implementation): Add GDBARCH parameter, pass to
read_objc_object and find_implementation_from_class.
(resolve_msgsend, resolve_msgsend_stret): Pass architecture
to find_implementation.
(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
architecture to read_objc_super and find_implementation_from_class.
* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
ppc64_standard_linkage3_target): Pass architecture to
ppc64_desc_entry_point.
* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
(rs6000_fetch_instruction): Add GDBARCH parameter.
(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
rs6000_fetch_instruction.
(skip_prologue): Pass architecture to rs6000_fetch_instruction.
* remote-mips.c (mips_store_word): Return old_contents as host
integer value instead of target bytes.
* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
(s390_analyze_prologue): Initialize it.
(extend_simple_arg): Add GDBARCH parameter.
(s390_push_dummy_call): Pass architecture to extend_simple_arg.
* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
* scm-valprint.c (scm_scmval_print): Likewise.
(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
SCM_BYTE_ORDER.
* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
look_for_args_moves.
(sh64_skip_prologue): Pass architecture to
sh64_skip_prologue_hard_way.
* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
(sh_frame_cache): Likewise.
* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
Pass architecture to extract_mips_address.
* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
to sparc_fetch_wcookie.
(sparc32_frame_prev_register): Likewise.
* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
(spu_virtual_frame_pointer): Likewise.
(spu_frame_unwind_cache): Likewise.
(info_spu_mailbox_list): Add BYTE_ORER parameter.
(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
to info_spu_dma_cmdlist.
* symfile.c (read_target_long_array): Add GDBARCH parameter.
(simple_read_overlay_table, simple_read_overlay_region_table,
simple_overlay_update_1): Pass architecture to read_target_long_array.
* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
(v850_frame_cache): Pass architecture to v850_analyze_prologue.
* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
parameter.
(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
to xstormy16_analyze_prologue.
(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
(xstormy16_find_jmp_table_entry): Likewise.
(xstormy16_skip_trampoline_code): Pass architecture to
xstormy16_resolve_jmp_table_entry.
(xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Pass architecture to
xstormy16_find_jmp_table_entry.
* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
(call0_analyze_prologue): Add GDBARCH parameter, pass to
call0_track_op.
(call0_frame_cache): Pass architecture to call0_analyze_prologue.
(xtensa_skip_prologue): Likewise.
2009-07-02 19:25:59 +02:00
|
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
struct s390_sigtramp_unwind_cache *info;
|
|
|
|
ULONGEST this_sp, prev_sp;
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
CORE_ADDR next_ra, next_cfa, sigreg_ptr, sigreg_high_off;
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
int i;
|
|
|
|
|
|
|
|
if (*this_prologue_cache)
|
2015-09-25 20:08:07 +02:00
|
|
|
return (struct s390_sigtramp_unwind_cache *) *this_prologue_cache;
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
info = FRAME_OBSTACK_ZALLOC (struct s390_sigtramp_unwind_cache);
|
|
|
|
*this_prologue_cache = info;
|
2008-05-01 02:18:27 +02:00
|
|
|
info->saved_regs = trad_frame_alloc_saved_regs (this_frame);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
|
2008-05-01 02:18:27 +02:00
|
|
|
this_sp = get_frame_register_unsigned (this_frame, S390_SP_REGNUM);
|
|
|
|
next_ra = get_frame_pc (this_frame);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
next_cfa = this_sp + 16*word_size + 32;
|
|
|
|
|
|
|
|
/* New-style RT frame:
|
|
|
|
retcode + alignment (8 bytes)
|
|
|
|
siginfo (128 bytes)
|
2011-01-11 22:53:25 +01:00
|
|
|
ucontext (contains sigregs at offset 5 words). */
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
if (next_ra == next_cfa)
|
|
|
|
{
|
2004-05-04 20:50:26 +02:00
|
|
|
sigreg_ptr = next_cfa + 8 + 128 + align_up (5*word_size, 8);
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
/* sigregs are followed by uc_sigmask (8 bytes), then by the
|
|
|
|
upper GPR halves if present. */
|
|
|
|
sigreg_high_off = 8;
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Old-style RT frame and all non-RT frames:
|
|
|
|
old signal mask (8 bytes)
|
2011-01-11 22:53:25 +01:00
|
|
|
pointer to sigregs. */
|
2001-10-14 00:13:35 +02:00
|
|
|
else
|
|
|
|
{
|
* defs.h (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
* gdbcore.h (read_memory_integer, safe_read_memory_integer,
read_memory_unsigned_integer, write_memory_signed_integer,
write_memory_unsigned_integer): Add BYTE_ORDER parameter.
* corefile.c (struct captured_read_memory_integer_arguments): Add
BYTE_ORDER member.
(safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
struct captured_read_memory_integer_arguments.
(do_captured_read_memory_integer): Pass it to read_memory_integer.
(read_memory_integer): Add BYTE_ORDER parameter. Pass it to
extract_signed_integer.
(read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
extract_unsigned_integer.
(write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
to store_signed_integer.
(write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
to store_unsigned_integer.
* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
Pass it to extract_unsigned_integer.
Update calls to extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer, read_memory_integer,
read_memory_unsigned_integer, safe_read_memory_integer,
write_memory_signed_integer, write_memory_unsigned_integer, and
get_target_memory_unsigned to pass byte order:
* ada-lang.c (ada_value_binop): Update.
* ada-valprint.c (char_at): Update.
* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
alpha_extract_return_value, alpha_read_insn,
alpha_get_longjmp_target): Update.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
* amd64obsd-tdep.c (amd64obsd_supply_uthread,
amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
amd64_displaced_step_fixup): Update.
* arm-linux-tdep.c (arm_linux_sigreturn_init,
arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
arm_return_value): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
* auxv.c (default_auxv_parse): Update.
* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
avr_scan_prologue, avr_extract_return_value,
avr_frame_prev_register, avr_push_dummy_call): Update.
* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
bsd_uthread_wait, bsd_uthread_thread_alive,
bsd_uthread_extra_thread_info): Update.
* c-lang.c (c_printstr, print_wchar): Update.
* cp-valprint.c (cp_print_class_member): Update.
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
cris_extract_return_value, find_step_target, dip_prefix,
sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
move_mem_to_reg_movem_op, get_data_from_address): Update.
* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
* dwarf2-frame.c (execute_cfa_program): Update.
* dwarf2loc.c (find_location_expression): Update.
* dwarf2read.c (dwarf2_const_value): Update.
* expprint.c (print_subexp_standard): Update.
* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
unsigned_address_to_pointer, address_to_signed_pointer,
read_var_value): Update.
* frame.c (frame_unwind_register_signed,
frame_unwind_register_unsigned, get_frame_memory_signed,
get_frame_memory_unsigned): Update.
* frame-unwind.c (frame_unwind_got_constant): Update.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Update.
* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
frv_extract_return_value, find_func_descr,
frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
* f-valprint.c (f_val_print): Update.
* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
Update.
* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
h8300_push_dummy_call, h8300_extract_return_value,
h8300h_extract_return_value, h8300_store_return_value,
h8300h_store_return_value): Update.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
Update.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
hppa64_hpux_in_solib_call_trampoline,
hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
hppa_hpux_sigtramp_frame_unwind_cache,
hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
hppa32_hpux_search_dummy_call_sequence,
hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
hppa_hpux_unwind_adjust_stub): Update.
* hppa-linux-tdep.c (insns_match_pattern,
hppa_linux_find_global_pointer): Update.
* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
hppa_pseudo_register_read, hppa_frame_prev_register_helper,
hppa_match_insns): Update.
* hpux-thread.c (hpux_thread_fetch_registers): Update.
* i386-tdep.c (i386bsd_sigcontext_addr): Update.
* i386-cygwin-tdep.c (core_process_module_section): Update.
* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
amd64_darwin_sstep_at_sigreturn): Update.
* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
amd64_darwin_sigcontext_addr): Likewise.
* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
* i386obsd-nat.c (i386obsd_supply_pcb): Update.
* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
i386obsd_trapframe_cache): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
i386_analyze_frame_setup, i386_analyze_prologue,
i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
i386_get_longjmp_target, i386_push_dummy_call,
i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
i386_fetch_pointer_argument): Update.
* i387-tdep.c (i387_supply_fsave): Update.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
ia64_libunwind_frame_prev_register,
ia64_libunwind_sigtramp_frame_this_id,
ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
find_extant_func_descr, find_func_descr,
ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
ia64_unwind_pc): Update.
* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
iq2000_scan_prologue, iq2000_extract_return_value,
iq2000_push_dummy_call): Update.
* irix5nat.c (fill_gregset): Update.
* jv-lang.c (evaluate_subexp_java): Update.
* jv-valprint.c (java_value_print): Update.
* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
lm32_extract_return_value, lm32_store_return_value): Update.
* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
m32c_m16c_pointer_to_address): Update.
* m32r-tdep.c (m32r_store_return_value, decode_prologue,
m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
Update.
* m68hc11-tdep.c (m68hc11_pseudo_register_read,
m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
m68hc11_push_dummy_call): Update.
* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
Update.
* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
m68k_get_longjmp_target): Update.
* m88k-tdep.c (m88k_fetch_instruction): Update.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
* mi/mi-main.c (mi_cmd_data_write_memory): Update.
* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
mips64_linux_get_longjmp_target, mips64_fill_gregset,
mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
mips_o32_push_dummy_call, mips_o64_push_dummy_call,
mips_single_step_through_delay, mips_skip_pic_trampoline_code,
mips_integer_to_address): Update.
* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
Update.
* monitor.c (monitor_supply_register, monitor_write_memory,
monitor_read_memory_single): Update.
* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
moxie_analyze_prologue): Update.
* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
mt_push_dummy_call): Update.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class, find_implementation_from_class): Update.
* ppc64-linux-tdep.c (ppc64_desc_entry_point,
ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
Update.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
ppcobsd_sigtramp_frame_cache): Update.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
ppc64_sysv_abi_return_value): Update.
* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
* procfs.c (procfs_auxv_parse): Update.
* p-valprint.c (pascal_val_print): Update.
* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
regcache_raw_write_signed, regcache_raw_write_unsigned,
regcache_cooked_read_signed, regcache_cooked_read_unsigned,
regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
* remote-m32r-sdi.c (m32r_fetch_register): Update.
* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
Update.
* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
rs6000_convert_from_func_ptr_addr, branch_dest,
rs6000_software_single_step): Update.
* rs6000-tdep.c (rs6000_in_function_epilogue_p,
ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
rs6000_frame_cache): Update.
* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
* scm-exp.c (scm_lreadr): Update.
* scm-lang.c (scm_get_field, scm_unpack): Update.
* scm-valprint.c (scm_val_print): Update.
* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
score_fetch_inst): Update.
* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
sh64_pseudo_register_read, sh64_pseudo_register_write,
sh64_frame_prev_register): Update:
* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
* solib-darwin.c (darwin_load_image_infos): Update.
* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
find_canonical_descriptor_in_load_object): Update.
* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
irix_open_symbol_file_object): Update.
* solib-som.c (som_solib_create_inferior_hook, link_map_start,
som_current_sos, som_open_symbol_file_object): Update.
* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
Update.
* solib-svr4.c (read_program_header, scan_dyntag_auxv,
solib_svr4_r_ldsomap): Update.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
sparc64obsd_collect_uthread): Update.
* sparc64-tdep.c (sparc64_pseudo_register_read,
sparc64_pseudo_register_write, sparc64_supply_gregset,
sparc64_collect_gregset): Update.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
sparc32obsd_collect_uthread): Update.
* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
sparc_collect_rwindow): Update.
* spu-linux-nat.c (parse_spufs_run): Update.
* spu-tdep.c (spu_pseudo_register_read_spu,
spu_pseudo_register_write_spu, spu_pointer_to_address,
spu_analyze_prologue, spu_in_function_epilogue_p,
spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
info_spu_dma_command, info_spu_proxydma_command): Update.
* stack.c (print_frame_nameless_args, frame_info): Update.
* symfile.c (read_target_long_array, simple_read_overlay_table,
simple_read_overlay_region_table): Update.
* target.c (debug_print_register): Update.
* tramp-frame.c (tramp_frame_start): Update.
* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
v850_extract_return_value, v850_store_return_value,
* valarith.c (value_binop, value_bit_index): Update.
* valops.c (value_cast): Update.
* valprint.c (val_print_type_code_int, val_print_string,
read_string): Update.
* value.c (unpack_long, unpack_double, unpack_field_as_long,
modify_field, pack_long): Update.
* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
vax_skip_prologue): Update.
* xstormy16-tdep.c (xstormy16_push_dummy_call,
xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
xtensa_pseudo_register_write, xtensa_frame_cache,
xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
BYTE_ORDER parameter.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
* dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
(decimal_to_string, decimal_from_integral, decimal_from_floating,
decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
Pass it to match_endianness.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters. Pass them to match_endianness.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
Pass them to match_endianness.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
Pass them to match_endianness.
* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
BYTE_ORDER_Y output parameters.
(value_binop): Update call to value_args_as_decimal.
Update calls to decimal_to_string, decimal_from_string,
decimal_from_integral, decimal_from_floating, decimal_to_doublest,
decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
to pass/receive byte order:
* c-exp.y (parse_number): Update.
* printcmd.c (printf_command): Update.
* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
value_equal, value_less): Update.
* valops.c (value_cast, value_one): Update.
* valprint.c (print_decimal_floating): Update.
* value.c (unpack_long, unpack_double): Update.
* python/python-value.c (valpy_nonzero): Update.
* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
(printstr): Update calls to char_at.
(ada_val_print_array): Likewise.
* valprint.c (read_string): Add BYTE_ORDER parameter.
(val_print_string): Update call to read_string.
* c-lang.c (c_get_string): Likewise.
* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
Use it instead of current_gdbarch.
* printcmd.c (printf_command): Update calls to target_wide_charset.
* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
Pass to target_wide_charset. Use it instead of current_gdbarch.
(classify_type): Add BYTE_ORDER parameter. Pass to
charset_for_string_type. Allow NULL encoding pointer.
(print_wchar): Add BYTE_ORDER parameter.
(c_emit_char): Update calls to classify_type and print_wchar.
(c_printchar, c_printstr): Likewise.
* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
parameter.
* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
(rs6000_skip_trampoline_code): Update call.
* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
(alpha_read_insn): Add GDBARCH parameter.
* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
(alpha_register_to_value): Pass architecture to alpha_sts.
(alpha_extract_return_value): Likewise.
(alpha_value_to_register): Pass architecture to alpha_lds.
(alpha_store_return_value): Likewise.
(alpha_read_insn): Add GDBARCH parameter.
(alpha_skip_prologue): Pass architecture to alpha_read_insn.
(alpha_heuristic_proc_start): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_next_pc): Likewise.
(alpha_sigtramp_frame_this_id): Pass architecture to
tdep->dynamic_sigtramp_offset callback.
(alpha_sigtramp_frame_sniffer): Pass architecture to
tdep->pc_in_sigtramp callback.
* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
(alphafbsd_sigtramp_offset): Likewise.
* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
parameter. Pass to alpha_read_insn.
(alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset_1.
(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset.
(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
and alpha_linux_sigtramp_offset.
* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alphanbsd_sigtramp_offset.
* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_read_insn.
(alphaobsd_sigcontext_addr): Pass architecture to
alphaobsd_sigtramp_offset.
* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
parameter.
* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
(amd64_frame_cache): Likewise.
* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
* arm-wince-tdep.c: Include "frame.h".
* avr-tdep.c (EXTRACT_INSN): Remove.
(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
(avr_skip_prologue): Pass architecture to avr_scan_prologue.
(avr_frame_unwind_cache): Likewise.
* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
(find_step_target): Initialize it.
(get_data_from_address): Add BYTE_ORDER parameter.
(bdap_prefix): Pass byte order to get_data_from_address.
(handle_prefix_assign_mode_for_aritm_op): Likewise.
(three_operand_add_sub_cmp_and_or_op): Likewise.
(handle_inc_and_index_mode_for_aritm_op): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
(frv_linux_sigcontext_reg_addr): Pass architecture to
frv_linux_pc_in_sigtramp.
(frv_linux_sigtramp_frame_sniffer): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
(h8300_analyze_prologue): Add GDBARCH parameter. Pass to
h8300_is_argument_spill.
(h8300_frame_cache, h8300_skip_prologue): Pass architecture
to h8300_analyze_prologue.
* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
in_solib_call_trampoline callback.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
parameter.
(hppa64_push_dummy_call): Pass architecture to
hppa64_convert_code_addr_to_fptr.
(hppa_match_insns): Add GDBARCH parameter.
(hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
hppa_match_insns.
(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
hppa_match_insns_relaxed.
(hppa_stub_unwind_sniffer): Pass architecture to
tdep->in_solib_call_trampoline callback.
* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
hppa_hpux_search_pattern.
* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
Pass to insns_match_pattern.
(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
hppa_linux_sigtramp_find_sigcontext.
(hppa_linux_sigtramp_frame_sniffer): Likewise.
(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
(hppa64_hpux_in_solib_call_trampoline): Likewise.
* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
(i386_analyze_frame_setup): Add GDBARCH parameter.
(i386_analyze_prologue): Add GDBARCH parameter. Pass to
i386_follow_jump and i386_analyze_frame_setup.
(i386_skip_prologue): Pass architecture to i386_analyze_prologue
and i386_follow_jump.
(i386_frame_cache): Pass architecture to i386_analyze_prologue.
(i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
frame to i386_pe_skip_trampoline_code.
* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
to sigcontext_register_address callback.
* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
(ia64_find_unwind_table): Pass architecture to
ia64_find_global_pointer.
(find_extant_func_descr): Add GDBARCH parameter.
(find_func_descr): Pass architecture to find_extant_func_descr
and ia64_find_global_pointer.
(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
tdep->sigcontext_register_address callback.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
GDBARCH parameter.
* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
lm32_analyze_prologue.
* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
(m32r_skip_prologue): Pass architecture to decode_prologue.
* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
(m68hc11_scan_prologue): Pass architecture to
m68hc11_analyze_instruction.
* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
(m68k_analyze_prologue): Pass architecture to
m68k_analyze_frame_setup.
* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
(m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
to m88k_fetch_instruction.
(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
(m88k_frame_cache): Likewise.
* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
(mep_analyze_prologue): Pass architecture to mep_get_insn.
* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
(mips32_next_pc): Pass architecture to mips_fetch_instruction.
(deal_with_atomic_sequence): Likewise.
(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
(mips16_scan_prologue): Likewise.
(mips32_scan_prologue): Likewise.
(mips16_in_function_epilogue_p): Likewise.
(mips32_in_function_epilogue_p): Likewise.
(mips_about_to_return): Likewise.
(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
(mips_skip_prologue): Pass architecture to mips16_scan_prologue
and mips32_scan_prologue.
(mips_in_function_epilogue_p): Pass architecture to
mips16_in_function_epilogue_p and
mips32_in_function_epilogue_p.
(heuristic_proc_start): Pass architecture to mips_fetch_instruction
and mips_about_to_return.
(mips_skip_mips16_trampoline_code): Pass architecture to
mips_fetch_instruction.
(fetch_mips_16): Add GDBARCH parameter.
(mips16_next_pc): Pass architecture to fetch_mips_16.
(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
fetch_mips_16.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class): Add GDBARCH parameter.
(find_implementation_from_class): Add GDBARCH parameter, pass
to read_objc_class, read_objc_methlist_nmethods, and
read_objc_methlist_method.
(find_implementation): Add GDBARCH parameter, pass to
read_objc_object and find_implementation_from_class.
(resolve_msgsend, resolve_msgsend_stret): Pass architecture
to find_implementation.
(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
architecture to read_objc_super and find_implementation_from_class.
* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
ppc64_standard_linkage3_target): Pass architecture to
ppc64_desc_entry_point.
* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
(rs6000_fetch_instruction): Add GDBARCH parameter.
(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
rs6000_fetch_instruction.
(skip_prologue): Pass architecture to rs6000_fetch_instruction.
* remote-mips.c (mips_store_word): Return old_contents as host
integer value instead of target bytes.
* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
(s390_analyze_prologue): Initialize it.
(extend_simple_arg): Add GDBARCH parameter.
(s390_push_dummy_call): Pass architecture to extend_simple_arg.
* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
* scm-valprint.c (scm_scmval_print): Likewise.
(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
SCM_BYTE_ORDER.
* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
look_for_args_moves.
(sh64_skip_prologue): Pass architecture to
sh64_skip_prologue_hard_way.
* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
(sh_frame_cache): Likewise.
* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
Pass architecture to extract_mips_address.
* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
to sparc_fetch_wcookie.
(sparc32_frame_prev_register): Likewise.
* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
(spu_virtual_frame_pointer): Likewise.
(spu_frame_unwind_cache): Likewise.
(info_spu_mailbox_list): Add BYTE_ORER parameter.
(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
to info_spu_dma_cmdlist.
* symfile.c (read_target_long_array): Add GDBARCH parameter.
(simple_read_overlay_table, simple_read_overlay_region_table,
simple_overlay_update_1): Pass architecture to read_target_long_array.
* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
(v850_frame_cache): Pass architecture to v850_analyze_prologue.
* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
parameter.
(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
to xstormy16_analyze_prologue.
(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
(xstormy16_find_jmp_table_entry): Likewise.
(xstormy16_skip_trampoline_code): Pass architecture to
xstormy16_resolve_jmp_table_entry.
(xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Pass architecture to
xstormy16_find_jmp_table_entry.
* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
(call0_analyze_prologue): Add GDBARCH parameter, pass to
call0_track_op.
(call0_frame_cache): Pass architecture to call0_analyze_prologue.
(xtensa_skip_prologue): Likewise.
2009-07-02 19:25:59 +02:00
|
|
|
sigreg_ptr = read_memory_unsigned_integer (next_cfa + 8,
|
|
|
|
word_size, byte_order);
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
/* sigregs are followed by signo (4 bytes), then by the
|
|
|
|
upper GPR halves if present. */
|
|
|
|
sigreg_high_off = 4;
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
}
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
/* The sigregs structure looks like this:
|
2013-10-30 18:51:57 +01:00
|
|
|
long psw_mask;
|
|
|
|
long psw_addr;
|
|
|
|
long gprs[16];
|
|
|
|
int acrs[16];
|
|
|
|
int fpc;
|
|
|
|
int __pad;
|
|
|
|
double fprs[16]; */
|
2001-10-14 00:13:35 +02:00
|
|
|
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
/* PSW mask and address. */
|
|
|
|
info->saved_regs[S390_PSWM_REGNUM].addr = sigreg_ptr;
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
sigreg_ptr += word_size;
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
info->saved_regs[S390_PSWA_REGNUM].addr = sigreg_ptr;
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
sigreg_ptr += word_size;
|
|
|
|
|
|
|
|
/* Then the GPRs. */
|
|
|
|
for (i = 0; i < 16; i++)
|
|
|
|
{
|
|
|
|
info->saved_regs[S390_R0_REGNUM + i].addr = sigreg_ptr;
|
|
|
|
sigreg_ptr += word_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Then the ACRs. */
|
|
|
|
for (i = 0; i < 16; i++)
|
|
|
|
{
|
|
|
|
info->saved_regs[S390_A0_REGNUM + i].addr = sigreg_ptr;
|
|
|
|
sigreg_ptr += 4;
|
2001-10-14 00:13:35 +02:00
|
|
|
}
|
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
/* The floating-point control word. */
|
|
|
|
info->saved_regs[S390_FPC_REGNUM].addr = sigreg_ptr;
|
|
|
|
sigreg_ptr += 8;
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
/* And finally the FPRs. */
|
|
|
|
for (i = 0; i < 16; i++)
|
|
|
|
{
|
|
|
|
info->saved_regs[S390_F0_REGNUM + i].addr = sigreg_ptr;
|
|
|
|
sigreg_ptr += 8;
|
|
|
|
}
|
|
|
|
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
/* If we have them, the GPR upper halves are appended at the end. */
|
|
|
|
sigreg_ptr += sigreg_high_off;
|
|
|
|
if (tdep->gpr_full_regnum != -1)
|
|
|
|
for (i = 0; i < 16; i++)
|
|
|
|
{
|
2013-10-30 18:51:57 +01:00
|
|
|
info->saved_regs[S390_R0_UPPER_REGNUM + i].addr = sigreg_ptr;
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
sigreg_ptr += 4;
|
|
|
|
}
|
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
/* Restore the previous frame's SP. */
|
|
|
|
prev_sp = read_memory_unsigned_integer (
|
|
|
|
info->saved_regs[S390_SP_REGNUM].addr,
|
* defs.h (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter.
* findvar.c (extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
* gdbcore.h (read_memory_integer, safe_read_memory_integer,
read_memory_unsigned_integer, write_memory_signed_integer,
write_memory_unsigned_integer): Add BYTE_ORDER parameter.
* corefile.c (struct captured_read_memory_integer_arguments): Add
BYTE_ORDER member.
(safe_read_memory_integer): Add BYTE_ORDER parameter. Store it into
struct captured_read_memory_integer_arguments.
(do_captured_read_memory_integer): Pass it to read_memory_integer.
(read_memory_integer): Add BYTE_ORDER parameter. Pass it to
extract_signed_integer.
(read_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it to
extract_unsigned_integer.
(write_memory_signed_integer): Add BYTE_ORDER parameter. Pass it
to store_signed_integer.
(write_memory_unsigned_integer): Add BYTE_ORDER parameter. Pass it
to store_unsigned_integer.
* target.h (get_target_memory_unsigned): Add BYTE_ORDER parameter.
* target.c (get_target_memory_unsigned): Add BYTE_ORDER parameter.
Pass it to extract_unsigned_integer.
Update calls to extract_signed_integer, extract_unsigned_integer,
extract_long_unsigned_integer, store_signed_integer,
store_unsigned_integer, read_memory_integer,
read_memory_unsigned_integer, safe_read_memory_integer,
write_memory_signed_integer, write_memory_unsigned_integer, and
get_target_memory_unsigned to pass byte order:
* ada-lang.c (ada_value_binop): Update.
* ada-valprint.c (char_at): Update.
* alpha-osf1-tdep.c (alpha_osf1_sigcontext_addr): Update.
* alpha-tdep.c (alpha_lds, alpha_sts, alpha_push_dummy_call,
alpha_extract_return_value, alpha_read_insn,
alpha_get_longjmp_target): Update.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Update.
* amd64obsd-tdep.c (amd64obsd_supply_uthread,
amd64obsd_collect_uthread, amd64obsd_trapframe_cache): Update.
* amd64-tdep.c (amd64_push_dummy_call, amd64_analyze_prologue,
amd64_frame_cache, amd64_sigtramp_frame_cache, fixup_riprel,
amd64_displaced_step_fixup): Update.
* arm-linux-tdep.c (arm_linux_sigreturn_init,
arm_linux_rt_sigreturn_init, arm_linux_supply_gregset): Update.
* arm-tdep.c (thumb_analyze_prologue, arm_skip_prologue,
arm_scan_prologue, arm_push_dummy_call, thumb_get_next_pc,
arm_get_next_pc, arm_extract_return_value, arm_store_return_value,
arm_return_value): Update.
* arm-wince-tdep.c (arm_pe_skip_trampoline_code): Update.
* auxv.c (default_auxv_parse): Update.
* avr-tdep.c (avr_address_to_pointer, avr_pointer_to_address,
avr_scan_prologue, avr_extract_return_value,
avr_frame_prev_register, avr_push_dummy_call): Update.
* bsd-uthread.c (bsd_uthread_check_magic, bsd_uthread_lookup_offset,
bsd_uthread_wait, bsd_uthread_thread_alive,
bsd_uthread_extra_thread_info): Update.
* c-lang.c (c_printstr, print_wchar): Update.
* cp-valprint.c (cp_print_class_member): Update.
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache,
cris_push_dummy_call, cris_scan_prologue, cris_store_return_value,
cris_extract_return_value, find_step_target, dip_prefix,
sixteen_bit_offset_branch_op, none_reg_mode_jump_op,
move_mem_to_reg_movem_op, get_data_from_address): Update.
* dwarf2expr.c (dwarf2_read_address, execute_stack_op): Update.
* dwarf2-frame.c (execute_cfa_program): Update.
* dwarf2loc.c (find_location_expression): Update.
* dwarf2read.c (dwarf2_const_value): Update.
* expprint.c (print_subexp_standard): Update.
* findvar.c (unsigned_pointer_to_address, signed_pointer_to_address,
unsigned_address_to_pointer, address_to_signed_pointer,
read_var_value): Update.
* frame.c (frame_unwind_register_signed,
frame_unwind_register_unsigned, get_frame_memory_signed,
get_frame_memory_unsigned): Update.
* frame-unwind.c (frame_unwind_got_constant): Update.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp,
frv_linux_sigcontext_reg_addr, frv_linux_sigtramp_frame_cache):
Update.
* frv-tdep.c (frv_analyze_prologue, frv_skip_main_prologue,
frv_extract_return_value, find_func_descr,
frv_convert_from_func_ptr_addr, frv_push_dummy_call): Update.
* f-valprint.c (f_val_print): Update.
* gnu-v3-abi.c (gnuv3_decode_method_ptr, gnuv3_make_method_ptr):
Update.
* h8300-tdep.c (h8300_is_argument_spill, h8300_analyze_prologue,
h8300_push_dummy_call, h8300_extract_return_value,
h8300h_extract_return_value, h8300_store_return_value,
h8300h_store_return_value): Update.
* hppabsd-tdep.c (hppabsd_find_global_pointer): Update.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register):
Update.
* hppa-hpux-tdep.c (hppa32_hpux_in_solib_call_trampoline,
hppa64_hpux_in_solib_call_trampoline,
hppa_hpux_in_solib_return_trampoline, hppa_hpux_skip_trampoline_code,
hppa_hpux_sigtramp_frame_unwind_cache,
hppa_hpux_sigtramp_unwind_sniffer, hppa32_hpux_find_global_pointer,
hppa64_hpux_find_global_pointer, hppa_hpux_search_pattern,
hppa32_hpux_search_dummy_call_sequence,
hppa64_hpux_search_dummy_call_sequence, hppa_hpux_supply_save_state,
hppa_hpux_unwind_adjust_stub): Update.
* hppa-linux-tdep.c (insns_match_pattern,
hppa_linux_find_global_pointer): Update.
* hppa-tdep.c (hppa_in_function_epilogue_p, hppa32_push_dummy_call,
hppa64_convert_code_addr_to_fptr, hppa64_push_dummy_call,
skip_prologue_hard_way, hppa_frame_cache, hppa_fallback_frame_cache,
hppa_pseudo_register_read, hppa_frame_prev_register_helper,
hppa_match_insns): Update.
* hpux-thread.c (hpux_thread_fetch_registers): Update.
* i386-tdep.c (i386bsd_sigcontext_addr): Update.
* i386-cygwin-tdep.c (core_process_module_section): Update.
* i386-darwin-nat.c (i386_darwin_sstep_at_sigreturn,
amd64_darwin_sstep_at_sigreturn): Update.
* i386-darwin-tdep.c (i386_darwin_sigcontext_addr,
amd64_darwin_sigcontext_addr): Likewise.
* i386-linux-nat.c (i386_linux_sigcontext_addr): Update.
* i386nbsd-tdep.c (i386nbsd_sigtramp_cache_init): Update.
* i386-nto-tdep.c (i386nto_sigcontext_addr): Update.
* i386obsd-nat.c (i386obsd_supply_pcb): Update.
* i386obsd-tdep.c (i386obsd_supply_uthread, i386obsd_collect_uthread,
i386obsd_trapframe_cache): Update.
* i386-tdep.c (i386_displaced_step_fixup, i386_follow_jump,
i386_analyze_frame_setup, i386_analyze_prologue,
i386_skip_main_prologue, i386_frame_cache, i386_sigtramp_frame_cache,
i386_get_longjmp_target, i386_push_dummy_call,
i386_pe_skip_trampoline_code, i386_svr4_sigcontext_addr,
i386_fetch_pointer_argument): Update.
* i387-tdep.c (i387_supply_fsave): Update.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Update.
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write,
examine_prologue, ia64_frame_cache, ia64_frame_prev_register,
ia64_sigtramp_frame_cache, ia64_sigtramp_frame_prev_register,
ia64_access_reg, ia64_access_rse_reg, ia64_libunwind_frame_this_id,
ia64_libunwind_frame_prev_register,
ia64_libunwind_sigtramp_frame_this_id,
ia64_libunwind_sigtramp_frame_prev_register, ia64_find_global_pointer,
find_extant_func_descr, find_func_descr,
ia64_convert_from_func_ptr_addr, ia64_push_dummy_call, ia64_dummy_id,
ia64_unwind_pc): Update.
* iq2000-tdep.c (iq2000_pointer_to_address, iq2000_address_to_pointer,
iq2000_scan_prologue, iq2000_extract_return_value,
iq2000_push_dummy_call): Update.
* irix5nat.c (fill_gregset): Update.
* jv-lang.c (evaluate_subexp_java): Update.
* jv-valprint.c (java_value_print): Update.
* lm32-tdep.c (lm32_analyze_prologue, lm32_push_dummy_call,
lm32_extract_return_value, lm32_store_return_value): Update.
* m32c-tdep.c (m32c_push_dummy_call, m32c_return_value,
m32c_skip_trampoline_code, m32c_m16c_address_to_pointer,
m32c_m16c_pointer_to_address): Update.
* m32r-tdep.c (m32r_store_return_value, decode_prologue,
m32r_skip_prologue, m32r_push_dummy_call, m32r_extract_return_value):
Update.
* m68hc11-tdep.c (m68hc11_pseudo_register_read,
m68hc11_pseudo_register_write, m68hc11_analyze_instruction,
m68hc11_push_dummy_call): Update.
* m68linux-tdep.c (m68k_linux_pc_in_sigtramp,
m68k_linux_get_sigtramp_info, m68k_linux_sigtramp_frame_cache):
Update.
* m68k-tdep.c (m68k_push_dummy_call, m68k_analyze_frame_setup,
m68k_analyze_register_saves, m68k_analyze_prologue, m68k_frame_cache,
m68k_get_longjmp_target): Update.
* m88k-tdep.c (m88k_fetch_instruction): Update.
* mep-tdep.c (mep_pseudo_cr32_read, mep_pseudo_csr_write,
mep_pseudo_cr32_write, mep_get_insn, mep_push_dummy_call): Update.
* mi/mi-main.c (mi_cmd_data_write_memory): Update.
* mips-linux-tdep.c (mips_linux_get_longjmp_target, supply_32bit_reg,
mips64_linux_get_longjmp_target, mips64_fill_gregset,
mips64_fill_fpregset, mips_linux_in_dynsym_stub): Update.
* mipsnbdsd-tdep.c (mipsnbsd_get_longjmp_target): Update.
* mips-tdep.c (mips_fetch_instruction, fetch_mips_16,
mips_eabi_push_dummy_call, mips_n32n64_push_dummy_call,
mips_o32_push_dummy_call, mips_o64_push_dummy_call,
mips_single_step_through_delay, mips_skip_pic_trampoline_code,
mips_integer_to_address): Update.
* mn10300-tdep.c (mn10300_analyze_prologue, mn10300_push_dummy_call):
Update.
* monitor.c (monitor_supply_register, monitor_write_memory,
monitor_read_memory_single): Update.
* moxie-tdep.c (moxie_store_return_value, moxie_extract_return_value,
moxie_analyze_prologue): Update.
* mt-tdep.c (mt_return_value, mt_skip_prologue, mt_select_coprocessor,
mt_pseudo_register_read, mt_pseudo_register_write, mt_registers_info,
mt_push_dummy_call): Update.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class, find_implementation_from_class): Update.
* ppc64-linux-tdep.c (ppc64_desc_entry_point,
ppc64_linux_convert_from_func_ptr_addr, ppc_linux_sigtramp_cache):
Update.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_sniffer,
ppcobsd_sigtramp_frame_cache): Update.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call,
do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call,
ppc64_sysv_abi_return_value): Update.
* ppc-linux-nat.c (ppc_linux_auxv_parse): Update.
* procfs.c (procfs_auxv_parse): Update.
* p-valprint.c (pascal_val_print): Update.
* regcache.c (regcache_raw_read_signed, regcache_raw_read_unsigned,
regcache_raw_write_signed, regcache_raw_write_unsigned,
regcache_cooked_read_signed, regcache_cooked_read_unsigned,
regcache_cooked_write_signed, regcache_cooked_write_unsigned): Update.
* remote-m32r-sdi.c (m32r_fetch_register): Update.
* remote-mips.c (mips_wait, mips_fetch_registers, mips_xfer_memory):
Update.
* rs6000-aix-tdep.c (rs6000_push_dummy_call, rs6000_return_value,
rs6000_convert_from_func_ptr_addr, branch_dest,
rs6000_software_single_step): Update.
* rs6000-tdep.c (rs6000_in_function_epilogue_p,
ppc_displaced_step_fixup, ppc_deal_with_atomic_sequence,
bl_to_blrl_insn_p, rs6000_fetch_instruction, skip_prologue,
rs6000_skip_main_prologue, rs6000_skip_trampoline_code,
rs6000_frame_cache): Update.
* s390-tdep.c (s390_pseudo_register_read, s390_pseudo_register_write,
s390x_pseudo_register_read, s390x_pseudo_register_write, s390_load,
s390_backchain_frame_unwind_cache, s390_sigtramp_frame_unwind_cache,
extend_simple_arg, s390_push_dummy_call, s390_return_value): Update.
* scm-exp.c (scm_lreadr): Update.
* scm-lang.c (scm_get_field, scm_unpack): Update.
* scm-valprint.c (scm_val_print): Update.
* score-tdep.c (score_breakpoint_from_pc, score_push_dummy_call,
score_fetch_inst): Update.
* sh64-tdep.c (look_for_args_moves, sh64_skip_prologue_hard_way,
sh64_analyze_prologue, sh64_push_dummy_call, sh64_extract_return_value,
sh64_pseudo_register_read, sh64_pseudo_register_write,
sh64_frame_prev_register): Update:
* sh-tdep.c (sh_analyze_prologue, sh_push_dummy_call_fpu,
sh_push_dummy_call_nofpu, sh_extract_return_value_nofpu,
sh_store_return_value_nofpu, sh_in_function_epilogue_p): Update.
* solib-darwin.c (darwin_load_image_infos): Update.
* solib-frv.c (fetch_loadmap, lm_base, frv_current_sos, enable_break2,
find_canonical_descriptor_in_load_object): Update.
* solib-irix.c (extract_mips_address, fetch_lm_info, irix_current_sos,
irix_open_symbol_file_object): Update.
* solib-som.c (som_solib_create_inferior_hook, link_map_start,
som_current_sos, som_open_symbol_file_object): Update.
* solib-sunos.c (SOLIB_EXTRACT_ADDRESS, LM_ADDR, LM_NEXT, LM_NAME):
Update.
* solib-svr4.c (read_program_header, scan_dyntag_auxv,
solib_svr4_r_ldsomap): Update.
* sparc64-linux-tdep.c (sparc64_linux_step_trap): Update.
* sparc64obsd-tdep.c (sparc64obsd_supply_uthread,
sparc64obsd_collect_uthread): Update.
* sparc64-tdep.c (sparc64_pseudo_register_read,
sparc64_pseudo_register_write, sparc64_supply_gregset,
sparc64_collect_gregset): Update.
* sparc-linux-tdep.c (sparc32_linux_step_trap): Update.
* sparcobsd-tdep.c (sparc32obsd_supply_uthread,
sparc32obsd_collect_uthread): Update.
* sparc-tdep.c (sparc_fetch_wcookie, sparc32_push_dummy_code,
sparc32_store_arguments, sparc32_return_value, sparc_supply_rwindow,
sparc_collect_rwindow): Update.
* spu-linux-nat.c (parse_spufs_run): Update.
* spu-tdep.c (spu_pseudo_register_read_spu,
spu_pseudo_register_write_spu, spu_pointer_to_address,
spu_analyze_prologue, spu_in_function_epilogue_p,
spu_frame_unwind_cache, spu_push_dummy_call, spu_software_single_step,
spu_get_longjmp_target, spu_get_overlay_table, spu_overlay_update_osect,
info_spu_signal_command, info_spu_mailbox_list, info_spu_dma_cmdlist,
info_spu_dma_command, info_spu_proxydma_command): Update.
* stack.c (print_frame_nameless_args, frame_info): Update.
* symfile.c (read_target_long_array, simple_read_overlay_table,
simple_read_overlay_region_table): Update.
* target.c (debug_print_register): Update.
* tramp-frame.c (tramp_frame_start): Update.
* v850-tdep.c (v850_analyze_prologue, v850_push_dummy_call,
v850_extract_return_value, v850_store_return_value,
* valarith.c (value_binop, value_bit_index): Update.
* valops.c (value_cast): Update.
* valprint.c (val_print_type_code_int, val_print_string,
read_string): Update.
* value.c (unpack_long, unpack_double, unpack_field_as_long,
modify_field, pack_long): Update.
* vax-tdep.c (vax_store_arguments, vax_push_dummy_call,
vax_skip_prologue): Update.
* xstormy16-tdep.c (xstormy16_push_dummy_call,
xstormy16_analyze_prologue, xstormy16_in_function_epilogue_p,
xstormy16_resolve_jmp_table_entry, xstormy16_find_jmp_table_entry,
xstormy16_pointer_to_address, xstormy16_address_to_pointer): Update.
* xtensa-tdep.c (extract_call_winsize, xtensa_pseudo_register_read,
xtensa_pseudo_register_write, xtensa_frame_cache,
xtensa_push_dummy_call, call0_track_op, call0_frame_cache): Update.
* dfp.h (decimal_to_string, decimal_from_string, decimal_from_integral,
decimal_from_floating, decimal_to_doublest, decimal_is_zero): Add
BYTE_ORDER parameter.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
* dfp.c (match_endianness): Add BYTE_ORDER parameter. Use it
instead of current_gdbarch.
(decimal_to_string, decimal_from_integral, decimal_from_floating,
decimal_to_doublest, decimal_is_zero): Add BYTE_ORDER parameter.
Pass it to match_endianness.
(decimal_binop): Add BYTE_ORDER_X, BYTE_ORDER_Y, and BYTE_ORDER_RESULT
parameters. Pass them to match_endianness.
(decimal_compare): Add BYTE_ORDER_X and BYTE_ORDER_Y parameters.
Pass them to match_endianness.
(decimal_convert): Add BYTE_ORDER_FROM and BYTE_ORDER_TO parameters.
Pass them to match_endianness.
* valarith.c (value_args_as_decimal): Add BYTE_ORDER_X and
BYTE_ORDER_Y output parameters.
(value_binop): Update call to value_args_as_decimal.
Update calls to decimal_to_string, decimal_from_string,
decimal_from_integral, decimal_from_floating, decimal_to_doublest,
decimal_is_zero, decimal_binop, decimal_compare and decimal_convert
to pass/receive byte order:
* c-exp.y (parse_number): Update.
* printcmd.c (printf_command): Update.
* valarith.c (value_args_as_decimal, value_binop, value_logical_not,
value_equal, value_less): Update.
* valops.c (value_cast, value_one): Update.
* valprint.c (print_decimal_floating): Update.
* value.c (unpack_long, unpack_double): Update.
* python/python-value.c (valpy_nonzero): Update.
* ada-valprint.c (char_at): Add BYTE_ORDER parameter.
(printstr): Update calls to char_at.
(ada_val_print_array): Likewise.
* valprint.c (read_string): Add BYTE_ORDER parameter.
(val_print_string): Update call to read_string.
* c-lang.c (c_get_string): Likewise.
* charset.h (target_wide_charset): Add BYTE_ORDER parameter.
* charset.c (target_wide_charset): Add BYTE_ORDER parameter.
Use it instead of current_gdbarch.
* printcmd.c (printf_command): Update calls to target_wide_charset.
* c-lang.c (charset_for_string_type): Add BYTE_ORDER parameter.
Pass to target_wide_charset. Use it instead of current_gdbarch.
(classify_type): Add BYTE_ORDER parameter. Pass to
charset_for_string_type. Allow NULL encoding pointer.
(print_wchar): Add BYTE_ORDER parameter.
(c_emit_char): Update calls to classify_type and print_wchar.
(c_printchar, c_printstr): Likewise.
* gdbarch.sh (in_solib_return_trampoline): Convert to type "m".
* gdbarch.c, gdbarch.h: Regenerate.
* arch-utils.h (generic_in_solib_return_trampoline): Add GDBARCH
parameter.
* arch-utils.c (generic_in_solib_return_trampoline): Likewise.
* hppa-hpux-tdep.c (hppa_hpux_in_solib_return_trampoline): Likewise.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): Likewise.
(rs6000_skip_trampoline_code): Update call.
* alpha-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
dynamic_sigtramp_offset and pc_in_sigtramp callbacks.
(alpha_read_insn): Add GDBARCH parameter.
* alpha-tdep.c (alpha_lds, alpha_sts): Add GDBARCH parameter.
(alpha_register_to_value): Pass architecture to alpha_sts.
(alpha_extract_return_value): Likewise.
(alpha_value_to_register): Pass architecture to alpha_lds.
(alpha_store_return_value): Likewise.
(alpha_read_insn): Add GDBARCH parameter.
(alpha_skip_prologue): Pass architecture to alpha_read_insn.
(alpha_heuristic_proc_start): Likewise.
(alpha_heuristic_frame_unwind_cache): Likewise.
(alpha_next_pc): Likewise.
(alpha_sigtramp_frame_this_id): Pass architecture to
tdep->dynamic_sigtramp_offset callback.
(alpha_sigtramp_frame_sniffer): Pass architecture to
tdep->pc_in_sigtramp callback.
* alphafbsd-tdep.c (alphafbsd_pc_in_sigtramp): Add GDBARCH parameter.
(alphafbsd_sigtramp_offset): Likewise.
* alpha-linux-tdep.c (alpha_linux_sigtramp_offset_1): Add GDBARCH
parameter. Pass to alpha_read_insn.
(alpha_linux_sigtramp_offset): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset_1.
(alpha_linux_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_linux_sigtramp_offset.
(alpha_linux_sigcontext_addr): Pass architecture to alpha_read_insn
and alpha_linux_sigtramp_offset.
* alphanbsd-tdep.c (alphanbsd_sigtramp_offset): Add GDBARCH parameter.
(alphanbsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alphanbsd_sigtramp_offset.
* alphaobsd-tdep.c (alphaobsd_sigtramp_offset): Add GDBARCH parameter.
(alphaobsd_pc_in_sigtramp): Add GDBARCH parameter. Pass to
alpha_read_insn.
(alphaobsd_sigcontext_addr): Pass architecture to
alphaobsd_sigtramp_offset.
* alpha-osf1-tdep.c (alpha_osf1_pc_in_sigtramp): Add GDBARCH
parameter.
* amd64-tdep.c (amd64_analyze_prologue): Add GDBARCH parameter.
(amd64_skip_prologue): Pass architecture to amd64_analyze_prologue.
(amd64_frame_cache): Likewise.
* arm-tdep.c (SWAP_SHORT, SWAP_INT): Remove.
(thumb_analyze_prologue, arm_skip_prologue, arm_scan_prologue,
thumb_get_next_pc, arm_get_next_pc): Do not use SWAP_ macros.
* arm-wince-tdep.c: Include "frame.h".
* avr-tdep.c (EXTRACT_INSN): Remove.
(avr_scan_prologue): Add GDBARCH argument, inline EXTRACT_INSN.
(avr_skip_prologue): Pass architecture to avr_scan_prologue.
(avr_frame_unwind_cache): Likewise.
* cris-tdep.c (struct instruction_environment): Add BYTE_ORDER member.
(find_step_target): Initialize it.
(get_data_from_address): Add BYTE_ORDER parameter.
(bdap_prefix): Pass byte order to get_data_from_address.
(handle_prefix_assign_mode_for_aritm_op): Likewise.
(three_operand_add_sub_cmp_and_or_op): Likewise.
(handle_inc_and_index_mode_for_aritm_op): Likewise.
* frv-linux-tdep.c (frv_linux_pc_in_sigtramp): Add GDBARCH parameter.
(frv_linux_sigcontext_reg_addr): Pass architecture to
frv_linux_pc_in_sigtramp.
(frv_linux_sigtramp_frame_sniffer): Likewise.
* h8300-tdep.c (h8300_is_argument_spill): Add GDBARCH parameter.
(h8300_analyze_prologue): Add GDBARCH parameter. Pass to
h8300_is_argument_spill.
(h8300_frame_cache, h8300_skip_prologue): Pass architecture
to h8300_analyze_prologue.
* hppa-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter to
in_solib_call_trampoline callback.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter.
* hppa-tdep.c (hppa64_convert_code_addr_to_fptr): Add GDBARCH
parameter.
(hppa64_push_dummy_call): Pass architecture to
hppa64_convert_code_addr_to_fptr.
(hppa_match_insns): Add GDBARCH parameter.
(hppa_match_insns_relaxed): Add GDBARCH parameter. Pass to
hppa_match_insns.
(hppa_skip_trampoline_code): Pass architecture to hppa_match_insns.
(hppa_in_solib_call_trampoline): Add GDBARCH parameter. Pass to
hppa_match_insns_relaxed.
(hppa_stub_unwind_sniffer): Pass architecture to
tdep->in_solib_call_trampoline callback.
* hppa-hpux-tdep.c (hppa_hpux_search_pattern): Add GDBARCH parameter.
(hppa32_hpux_search_dummy_call_sequence): Pass architecture to
hppa_hpux_search_pattern.
* hppa-linux-tdep.c (insns_match_pattern): Add GDBARCH parameter.
(hppa_linux_sigtramp_find_sigcontext): Add GDBARCH parameter.
Pass to insns_match_pattern.
(hppa_linux_sigtramp_frame_unwind_cache): Pass architecture to
hppa_linux_sigtramp_find_sigcontext.
(hppa_linux_sigtramp_frame_sniffer): Likewise.
(hppa32_hpux_in_solib_call_trampoline): Add GDBARCH parameter.
(hppa64_hpux_in_solib_call_trampoline): Likewise.
* i386-tdep.c (i386_follow_jump): Add GDBARCH parameter.
(i386_analyze_frame_setup): Add GDBARCH parameter.
(i386_analyze_prologue): Add GDBARCH parameter. Pass to
i386_follow_jump and i386_analyze_frame_setup.
(i386_skip_prologue): Pass architecture to i386_analyze_prologue
and i386_follow_jump.
(i386_frame_cache): Pass architecture to i386_analyze_prologue.
(i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-tdep.h (i386_pe_skip_trampoline_code): Add FRAME parameter.
* i386-cygwin-tdep.c (i386_cygwin_skip_trampoline_code): Pass
frame to i386_pe_skip_trampoline_code.
* ia64-tdep.h (struct gdbarch_tdep): Add GDBARCH parameter
to sigcontext_register_address callback.
* ia64-tdep.c (ia64_find_global_pointer): Add GDBARCH parameter.
(ia64_find_unwind_table): Pass architecture to
ia64_find_global_pointer.
(find_extant_func_descr): Add GDBARCH parameter.
(find_func_descr): Pass architecture to find_extant_func_descr
and ia64_find_global_pointer.
(ia64_sigtramp_frame_init_saved_regs): Pass architecture to
tdep->sigcontext_register_address callback.
* ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): Add
GDBARCH parameter.
* iq2000-tdep.c (iq2000_scan_prologue): Add GDBARCH parameter.
(iq2000_frame_cache): Pass architecture to iq2000_scan_prologue.
* lm32-tdep.c (lm32_analyze_prologue): Add GDBARCH parameter.
(lm32_skip_prologue, lm32_frame_cache): Pass architecture to
lm32_analyze_prologue.
* m32r-tdep.c (decode_prologue): Add GDBARCH parameter.
(m32r_skip_prologue): Pass architecture to decode_prologue.
* m68hc11-tdep.c (m68hc11_analyze_instruction): Add GDBARCH parameter.
(m68hc11_scan_prologue): Pass architecture to
m68hc11_analyze_instruction.
* m68k-tdep.c (m68k_analyze_frame_setup): Add GDBARCH parameter.
(m68k_analyze_prologue): Pass architecture to
m68k_analyze_frame_setup.
* m88k-tdep.c (m88k_fetch_instruction): Add BYTE_ORDER parameter.
(m88k_analyze_prologue): Add GDBARCH parameter. Pass byte order
to m88k_fetch_instruction.
(m88k_skip_prologue): Pass architecture to m88k_analyze_prologue.
(m88k_frame_cache): Likewise.
* mep-tdep.c (mep_get_insn): Add GDBARCH parameter.
(mep_analyze_prologue): Pass architecture to mep_get_insn.
* mips-tdep.c (mips_fetch_instruction): Add GDBARCH parameter.
(mips32_next_pc): Pass architecture to mips_fetch_instruction.
(deal_with_atomic_sequence): Likewise.
(unpack_mips16): Add GDBARCH parameter, pass to mips_fetch_instruction.
(mips16_scan_prologue): Likewise.
(mips32_scan_prologue): Likewise.
(mips16_in_function_epilogue_p): Likewise.
(mips32_in_function_epilogue_p): Likewise.
(mips_about_to_return): Likewise.
(mips_insn16_frame_cache): Pass architecture to mips16_scan_prologue.
(mips_insn32_frame_cache): Pass architecture to mips32_scan_prologue.
(mips_skip_prologue): Pass architecture to mips16_scan_prologue
and mips32_scan_prologue.
(mips_in_function_epilogue_p): Pass architecture to
mips16_in_function_epilogue_p and
mips32_in_function_epilogue_p.
(heuristic_proc_start): Pass architecture to mips_fetch_instruction
and mips_about_to_return.
(mips_skip_mips16_trampoline_code): Pass architecture to
mips_fetch_instruction.
(fetch_mips_16): Add GDBARCH parameter.
(mips16_next_pc): Pass architecture to fetch_mips_16.
(extended_mips16_next_pc): Pass architecture to unpack_mips16 and
fetch_mips_16.
* objc-lang.c (read_objc_method, read_objc_methlist_nmethods,
read_objc_methlist_method, read_objc_object, read_objc_super,
read_objc_class): Add GDBARCH parameter.
(find_implementation_from_class): Add GDBARCH parameter, pass
to read_objc_class, read_objc_methlist_nmethods, and
read_objc_methlist_method.
(find_implementation): Add GDBARCH parameter, pass to
read_objc_object and find_implementation_from_class.
(resolve_msgsend, resolve_msgsend_stret): Pass architecture
to find_implementation.
(resolve_msgsend_super, resolve_msgsend_super_stret): Pass
architecture to read_objc_super and find_implementation_from_class.
* ppc64-linux-tdep.c (ppc64_desc_entry_point): Add GDBARCH parameter.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target,
ppc64_standard_linkage3_target): Pass architecture to
ppc64_desc_entry_point.
* rs6000-tdep.c (bl_to_blrl_insn_p): Add BYTE_ORDER parameter.
(skip_prologue): Pass byte order to bl_to_blrl_insn_p.
(rs6000_fetch_instruction): Add GDBARCH parameter.
(rs6000_skip_stack_check): Add GDBARCH parameter, pass to
rs6000_fetch_instruction.
(skip_prologue): Pass architecture to rs6000_fetch_instruction.
* remote-mips.c (mips_store_word): Return old_contents as host
integer value instead of target bytes.
* s390-tdep.c (struct s390_prologue_data): Add BYTE_ORDER member.
(s390_analyze_prologue): Initialize it.
(extend_simple_arg): Add GDBARCH parameter.
(s390_push_dummy_call): Pass architecture to extend_simple_arg.
* scm-lang.c (scm_get_field): Add BYTE_ORDER parameter.
* scm-lang.h (scm_get_field): Add BYTE_ORDER parameter.
(SCM_CAR, SCM_CDR): Pass SCM_BYTE_ORDER to scm_get_field.
* scm-valprint.c (scm_scmval_print): Likewise.
(scm_scmlist_print, scm_ipruk, scm_scmval_print): Define
SCM_BYTE_ORDER.
* sh64-tdep.c (look_for_args_moves): Add GDBARCH parameter.
(sh64_skip_prologue_hard_way): Add GDBARCH parameter, pass to
look_for_args_moves.
(sh64_skip_prologue): Pass architecture to
sh64_skip_prologue_hard_way.
* sh-tdep.c (sh_analyze_prologue): Add GDBARCH parameter.
(sh_skip_prologue): Pass architecture to sh_analyze_prologue.
(sh_frame_cache): Likewise.
* solib-irix.c (extract_mips_address): Add GDBARCH parameter.
(fetch_lm_info, irix_current_sos, irix_open_symbol_file_object):
Pass architecture to extract_mips_address.
* sparc-tdep.h (sparc_fetch_wcookie): Add GDBARCH parameter.
* sparc-tdep.c (sparc_fetch_wcookie): Add GDBARCH parameter.
(sparc_supply_rwindow, sparc_collect_rwindow): Pass architecture
to sparc_fetch_wcookie.
(sparc32_frame_prev_register): Likewise.
* sparc64-tdep.c (sparc64_frame_prev_register): Likewise.
* sparc32nbsd-tdep.c (sparc32nbsd_sigcontext_saved_regs): Likewise.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_saved_regs): Likewise.
* spu-tdep.c (spu_analyze_prologue): Add GDBARCH parameter.
(spu_skip_prologue): Pass architecture to spu_analyze_prologue.
(spu_virtual_frame_pointer): Likewise.
(spu_frame_unwind_cache): Likewise.
(info_spu_mailbox_list): Add BYTE_ORER parameter.
(info_spu_mailbox_command): Pass byte order to info_spu_mailbox_list.
(info_spu_dma_cmdlist): Add BYTE_ORER parameter.
(info_spu_dma_command, info_spu_proxydma_command): Pass byte order
to info_spu_dma_cmdlist.
* symfile.c (read_target_long_array): Add GDBARCH parameter.
(simple_read_overlay_table, simple_read_overlay_region_table,
simple_overlay_update_1): Pass architecture to read_target_long_array.
* v850-tdep.c (v850_analyze_prologue): Add GDBARCH parameter.
(v850_frame_cache): Pass architecture to v850_analyze_prologue.
* xstormy16-tdep.c (xstormy16_analyze_prologue): Add GDBARCH
parameter.
(xstormy16_skip_prologue, xstormy16_frame_cache): Pass architecture
to xstormy16_analyze_prologue.
(xstormy16_resolve_jmp_table_entry): Add GDBARCH parameter.
(xstormy16_find_jmp_table_entry): Likewise.
(xstormy16_skip_trampoline_code): Pass architecture to
xstormy16_resolve_jmp_table_entry.
(xstormy16_pointer_to_address): Likewise.
(xstormy16_address_to_pointer): Pass architecture to
xstormy16_find_jmp_table_entry.
* xtensa-tdep.c (call0_track_op): Add GDBARCH parameter.
(call0_analyze_prologue): Add GDBARCH parameter, pass to
call0_track_op.
(call0_frame_cache): Pass architecture to call0_analyze_prologue.
(xtensa_skip_prologue): Likewise.
2009-07-02 19:25:59 +02:00
|
|
|
word_size, byte_order);
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
/* Determine our frame base. */
|
|
|
|
info->frame_base = prev_sp + 16*word_size + 32;
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
return info;
|
2001-10-14 00:13:35 +02:00
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Implement this_id frame_unwind method for s390_sigtramp_frame_unwind. */
|
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
static void
|
2008-05-01 02:18:27 +02:00
|
|
|
s390_sigtramp_frame_this_id (struct frame_info *this_frame,
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
void **this_prologue_cache,
|
|
|
|
struct frame_id *this_id)
|
2001-10-14 00:13:35 +02:00
|
|
|
{
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
struct s390_sigtramp_unwind_cache *info
|
2008-05-01 02:18:27 +02:00
|
|
|
= s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache);
|
|
|
|
*this_id = frame_id_build (info->frame_base, get_frame_pc (this_frame));
|
2001-10-14 00:13:35 +02:00
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Implement prev_register frame_unwind method for sigtramp frames. */
|
|
|
|
|
2008-05-01 02:18:27 +02:00
|
|
|
static struct value *
|
|
|
|
s390_sigtramp_frame_prev_register (struct frame_info *this_frame,
|
|
|
|
void **this_prologue_cache, int regnum)
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
{
|
|
|
|
struct s390_sigtramp_unwind_cache *info
|
2008-05-01 02:18:27 +02:00
|
|
|
= s390_sigtramp_frame_unwind_cache (this_frame, this_prologue_cache);
|
2011-11-30 17:06:55 +01:00
|
|
|
return s390_trad_frame_prev_register (this_frame, info->saved_regs, regnum);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Implement sniffer frame_unwind method for sigtramp frames. */
|
|
|
|
|
2008-05-01 02:18:27 +02:00
|
|
|
static int
|
|
|
|
s390_sigtramp_frame_sniffer (const struct frame_unwind *self,
|
|
|
|
struct frame_info *this_frame,
|
|
|
|
void **this_prologue_cache)
|
2001-10-14 00:13:35 +02:00
|
|
|
{
|
2008-05-01 02:18:27 +02:00
|
|
|
CORE_ADDR pc = get_frame_pc (this_frame);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
bfd_byte sigreturn[2];
|
2001-11-13 18:38:49 +01:00
|
|
|
|
* breakpoint.h (breakpoint_restore_shadows): New
declaration.
* breakpoint.c (breakpoint_restore_shadows): New.
(read_memory_nobpt): Delete.
* gdbcore.h (read_memory_nobpt): Delete declaration.
* target.c (memory_xfer_partial): Call
breakpoint_restore_shadows.
(restore_show_memory_breakpoints)
(make_show_memory_beakpoints_cleanup): New.
(show_memory_breakpoints): New.
* target.h (make_show_memory_beakpoints_cleanup): Declare.
* ppc-linux-tdep.c (ppc_linux_memory_remove_breakpoint):
Make sure we see memory breakpoints when checking if
breakpoint is still there.
* alpha-tdep.c, alphanbsd-tdep.c, frame.c, frv-tdep.c,
hppa-linux-tdep.c, hppa-tdep.c, i386-linux-nat.c, i386-tdep.c,
m68klinux-tdep.c, mips-tdep.c, mn10300-tdep.c, s390-tdep.c,
sparc-tdep.c: Use target_read_memory instead of read_memory_nobpt.
2008-03-13 13:22:14 +01:00
|
|
|
if (target_read_memory (pc, sigreturn, 2))
|
2008-05-01 02:18:27 +02:00
|
|
|
return 0;
|
2001-11-13 18:38:49 +01:00
|
|
|
|
2014-01-22 18:54:43 +01:00
|
|
|
if (sigreturn[0] != op_svc)
|
2008-05-01 02:18:27 +02:00
|
|
|
return 0;
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
if (sigreturn[1] != 119 /* sigreturn */
|
|
|
|
&& sigreturn[1] != 173 /* rt_sigreturn */)
|
2008-05-01 02:18:27 +02:00
|
|
|
return 0;
|
2013-10-30 18:51:57 +01:00
|
|
|
|
2008-05-01 02:18:27 +02:00
|
|
|
return 1;
|
2001-10-14 00:13:35 +02:00
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* S390 sigtramp frame unwinder. */
|
|
|
|
|
2008-05-01 02:18:27 +02:00
|
|
|
static const struct frame_unwind s390_sigtramp_frame_unwind = {
|
|
|
|
SIGTRAMP_FRAME,
|
gdb/
* frame.c (frame_unwind_register): Throw an error if unwinding the
register failed.
* get_prev_frame_1 (get_prev_frame_1): Ask the unwinder if there's
an unwind stop reason.
(frame_stop_reason_string): Handle UNWIND_UNAVAILABLE.
* frame.h (enum unwind_stop_reason) <UNWIND_OUTERMOST,
UNWIND_UNAVAILABLE>: New.
* inline-frame.c (inline_frame_unwind): Install
default_frame_unwind_stop_reason.
* frame-unwind.c: Include "exceptions.h".
(frame_unwind_find_by_frame): Swallow NOT_AVAILABLE_ERROR errors.
(default_frame_unwind_stop_reason): New.
* frame-unwind.h (frame_unwind_stop_reason_ftype): New typedef.
(default_frame_unwind_stop_reason): Declare.
(struct frame_unwind) <stop_reason>: New function pointer.
* dummy-frame.c: Install default_frame_unwind_stop_reason.
* dwarf2-frame.c: Include exceptions.h.
(struct dwarf2_frame_cache) <unavailable_retaddr>: New field.
(dwarf2_frame_cache): Swallow NOT_AVAILABLE_ERROR errors when
computing the CFA. If such an error was thrown, set
unavailable_retaddr.
(dwarf2_frame_unwind_stop_reason): New.
(dwarf2_frame_this_id): Don't build a frame id if the CFA was
unavailable.
(dwarf2_frame_unwind): Install dwarf2_frame_unwind_stop_reason.
(dwarf2_signal_frame_unwind): Ditto.
* amd64-tdep.c: Include "exceptions.h".
(struct amd64_frame_cache): New field "base_p".
(amd64_init_frame_cache): Clear it.
(amd64_frame_cache_1): New, factored out from amd64_frame_cache.
Avoid reading registers with functions that throw if the register
is not necessary to compute the frame base.
(amd64_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
swallowing NOT_AVAILABLE_ERROR.
(amd64_frame_unwind_stop_reason): New.
(amd64_frame_this_id): Don't build a frame id if the frame base
was unavailable.
(amd64_frame_unwind): Install amd64_frame_unwind_stop_reason.
(amd64_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(amd64_sigtramp_frame_unwind_stop_reason): New.
(amd64_sigtramp_frame_this_id): Don't build a frame id if the
frame base was unavailable.
(amd64_sigtramp_frame_unwind): Install
amd64_sigtramp_frame_unwind_stop_reason.
(amd64_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(amd64_epilogue_frame_unwind_stop_reason): New.
(amd64_epilogue_frame_this_id): Don't build a frame id if the
frame base was unavailable.
(amd64_epilogue_frame_unwind): Install
amd64_epilogue_frame_unwind_stop_reason.
* i386-tdep.c: Include "exceptions.h".
(struct i386_frame_cache): New field "base_p".
(i386_init_frame_cache): Clear it.
(i386_frame_cache_1): New, factored out from amd64_frame_cache.
Avoid reading registers with functions that throw if the register
is not necessary to compute the frame base.
(i386_frame_cache): Reimplement wrapping amd64_frame_cache_1, and
swallowing NOT_AVAILABLE_ERROR.
(i386_frame_unwind_stop_reason): New.
(i386_frame_this_id): Don't build a frame id if the frame base was
unavailable.
(i386_frame_prev_register): Handle unavailable SP.
(i386_frame_unwind): Install i386_frame_unwind_stop_reason.
(i386_epilogue_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(i386_epilogue_frame_unwind_stop_reason): New.
(i386_epilogue_frame_this_id): Don't build a frame id if the frame
base was unavailable.
(i386_epilogue_frame_unwind): Install
i386_epilogue_frame_unwind_stop_reason.
(i386_sigtramp_frame_cache): Swallow NOT_AVAILABLE_ERROR, and set
base_p if the frame base was computable.
(i386_sigtramp_frame_unwind_stop_reason): New.
(i386_sigtramp_frame_this_id): Don't build a frame id if the frame
base was unavailable.
(i386_sigtramp_frame_unwind): Install
i386_sigtramp_frame_unwind_stop_reason.
* sentinel-frame.c (sentinel_frame_prev_register): Use the value
type's size, not the register's.
(sentinel_frame_unwind): Install default_frame_unwind_stop_reason.
* alpha-mdebug-tdep.c (alpha_mdebug_frame_unwind): Install
default_frame_unwind_stop_reason.
* alpha-tdep.c (alpha_sigtramp_frame_unwind)
(alpha_heuristic_frame_unwind): Ditto.
* amd64obsd-tdep.c (amd64obsd_trapframe_unwind): Ditto.
* arm-tdep.c (arm_prologue_unwind, arm_stub_unwind): Ditto.
* avr-tdep.c (avr_frame_unwind): Ditto.
* cris-tdep.c (cris_sigtramp_frame_unwind, cris_frame_unwind):
Ditto.
* frv-linux-tdep.c (frv_linux_sigtramp_frame_unwind): Ditto.
* frv-tdep.c (frv_frame_unwind): Ditto.
* h8300-tdep.c (h8300_frame_unwind): Ditto.
* hppa-hpux-tdep.c (hppa_hpux_sigtramp_frame_unwind): Ditto.
* hppa-linux-tdep.c (hppa_linux_sigtramp_frame_unwind): Ditto.
* hppa-tdep.c (hppa_frame_unwind, hppa_fallback_frame_unwind)
(hppa_stub_frame_unwind): Ditto.
* i386obsd-tdep.c (i386obsd_trapframe_unwind): Ditto.
* ia64-tdep.c (ia64_frame_unwind, ia64_sigtramp_frame_unwind)
(ia64_libunwind_frame_unwind)
(ia64_libunwind_sigtramp_frame_unwind): Ditto.
* iq2000-tdep.c (iq2000_frame_unwind): Ditto.
* lm32-tdep.c (lm32_frame_unwind): Ditto.
* m32c-tdep.c (m32c_unwind): Ditto.
* m32r-linux-tdep.c (m32r_linux_sigtramp_frame_unwind): Ditto.
* m32r-tdep.c (m32r_frame_unwind): Ditto.
* m68hc11-tdep.c (m68hc11_frame_unwind): Ditto.
* m68k-tdep.c (m68k_frame_unwind): Ditto.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_unwind): Ditto.
* m88k-tdep.c (m88k_frame_unwind): Ditto.
* mep-tdep.c (mep_frame_unwind): Ditto.
* microblaze-tdep.c (microblaze_frame_unwind): Ditto.
* mips-tdep.c (mips_insn16_frame_unwind, mips_insn32_frame_unwind)
(mips_stub_frame_unwind): Ditto.
* mn10300-tdep.c (mn10300_frame_unwind): Ditto.
* moxie-tdep.c (moxie_frame_unwind): Ditto.
* mt-tdep.c (mt_frame_unwind): Ditto.
* ppc-linux-tdep.c (ppu2spu_unwind): Ditto.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_unwind): Ditto.
* rs6000-tdep.c (rs6000_frame_unwind): Ditto.
* s390-tdep.c (s390_frame_unwind, s390_stub_frame_unwind)
(s390_sigtramp_frame_unwind): Ditto.
* score-tdep.c (score_prologue_unwind): Ditto.
* sh-tdep.c (sh_frame_unwind): Ditto.
* sh64-tdep.c (sh64_frame_unwind): Ditto.
* sparc-sol2-tdep.c (sparc32_sol2_sigtramp_frame_unwind): Ditto.
* sparc-tdep.c (sparc32_frame_unwind): Ditto.
* sparc64-sol2-tdep.c (sparc64_sol2_sigtramp_frame_unwind): Ditto.
* sparc64-tdep.c (sparc64_frame_unwind): Ditto.
* sparc64fbsd-tdep.c (sparc64fbsd_sigtramp_frame_unwind): Ditto.
* sparc64nbsd-tdep.c (sparc64nbsd_sigcontext_frame_unwind): Ditto.
* sparc64obsd-tdep.c (sparc64obsd_frame_unwind)
(sparc64obsd_trapframe_unwind): Ditto.
* sparcnbsd-tdep.c (sparc32nbsd_sigcontext_frame_unwind): Ditto.
* sparcobsd-tdep.c (sparc32obsd_sigtramp_frame_unwind): Ditto.
* spu-tdep.c (spu_frame_unwind, spu2ppu_unwind): Ditto.
* v850-tdep.c (v850_frame_unwind): Ditto.
* vax-tdep.c (vax_frame_unwind): Ditto.
* vaxobsd-tdep.c (vaxobsd_sigtramp_frame_unwind): Ditto.
* xstormy16-tdep.c (frame_unwind xstormy16_frame_unwind): Ditto.
* xtensa-tdep.c (xtensa_unwind): Ditto.
2011-03-18 19:52:32 +01:00
|
|
|
default_frame_unwind_stop_reason,
|
2008-05-01 02:18:27 +02:00
|
|
|
s390_sigtramp_frame_this_id,
|
|
|
|
s390_sigtramp_frame_prev_register,
|
|
|
|
NULL,
|
|
|
|
s390_sigtramp_frame_sniffer
|
|
|
|
};
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Syscall handling. */
|
|
|
|
|
2014-01-22 18:54:43 +01:00
|
|
|
/* Retrieve the syscall number at a ptrace syscall-stop. Return -1
|
|
|
|
upon error. */
|
|
|
|
|
|
|
|
static LONGEST
|
|
|
|
s390_linux_get_syscall_number (struct gdbarch *gdbarch,
|
|
|
|
ptid_t ptid)
|
|
|
|
{
|
|
|
|
struct regcache *regs = get_thread_regcache (ptid);
|
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
enum bfd_endian byte_order = gdbarch_byte_order (gdbarch);
|
|
|
|
ULONGEST pc;
|
|
|
|
ULONGEST svc_number = -1;
|
|
|
|
unsigned opcode;
|
|
|
|
|
|
|
|
/* Assume that the PC points after the 2-byte SVC instruction. We
|
|
|
|
don't currently support SVC via EXECUTE. */
|
|
|
|
regcache_cooked_read_unsigned (regs, tdep->pc_regnum, &pc);
|
|
|
|
pc -= 2;
|
|
|
|
opcode = read_memory_unsigned_integer ((CORE_ADDR) pc, 1, byte_order);
|
|
|
|
if (opcode != op_svc)
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
svc_number = read_memory_unsigned_integer ((CORE_ADDR) pc + 1, 1,
|
|
|
|
byte_order);
|
|
|
|
if (svc_number == 0)
|
|
|
|
regcache_cooked_read_unsigned (regs, S390_R1_REGNUM, &svc_number);
|
|
|
|
|
|
|
|
return svc_number;
|
|
|
|
}
|
|
|
|
|
2015-11-02 17:16:07 +01:00
|
|
|
/* Process record-replay */
|
|
|
|
|
|
|
|
static struct linux_record_tdep s390_linux_record_tdep;
|
|
|
|
static struct linux_record_tdep s390x_linux_record_tdep;
|
|
|
|
|
|
|
|
/* Record all registers but PC register for process-record. */
|
|
|
|
|
|
|
|
static int
|
|
|
|
s390_all_but_pc_registers_record (struct regcache *regcache)
|
|
|
|
{
|
2017-10-25 17:37:03 +02:00
|
|
|
struct gdbarch *gdbarch = regcache->arch ();
|
2015-11-02 17:16:07 +01:00
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 16; i++)
|
|
|
|
{
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_R0_REGNUM + i))
|
|
|
|
return -1;
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_A0_REGNUM + i))
|
|
|
|
return -1;
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_F0_REGNUM + i))
|
|
|
|
return -1;
|
|
|
|
if (tdep->gpr_full_regnum != -1)
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_R0_UPPER_REGNUM + i))
|
|
|
|
return -1;
|
|
|
|
if (tdep->v0_full_regnum != -1)
|
|
|
|
{
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_V0_LOWER_REGNUM + i))
|
|
|
|
return -1;
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_V16_REGNUM + i))
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_PSWM_REGNUM))
|
|
|
|
return -1;
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_FPC_REGNUM))
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Canonicalize system call SYSCALL belonging to ABI. Helper for
|
|
|
|
s390_linux_syscall_record. */
|
|
|
|
|
2015-11-02 17:16:07 +01:00
|
|
|
static enum gdb_syscall
|
|
|
|
s390_canonicalize_syscall (int syscall, enum s390_abi_kind abi)
|
|
|
|
{
|
|
|
|
switch (syscall)
|
|
|
|
{
|
|
|
|
/* s390 syscall numbers < 222 are mostly the same as x86, so just list
|
|
|
|
the exceptions. */
|
|
|
|
case 0:
|
|
|
|
return gdb_sys_no_syscall;
|
|
|
|
case 7:
|
|
|
|
return gdb_sys_restart_syscall;
|
|
|
|
/* These syscalls work only on 31-bit. */
|
|
|
|
case 13: /* time */
|
|
|
|
case 16: /* lchown[16] */
|
|
|
|
case 23: /* setuid[16] */
|
|
|
|
case 24: /* getuid[16] */
|
|
|
|
case 25: /* stime */
|
|
|
|
case 46: /* setgid[16] */
|
|
|
|
case 47: /* getgid[16] */
|
|
|
|
case 49: /* seteuid[16] */
|
|
|
|
case 50: /* getegid[16] */
|
|
|
|
case 70: /* setreuid[16] */
|
|
|
|
case 71: /* setregid[16] */
|
|
|
|
case 76: /* [old_]getrlimit */
|
|
|
|
case 80: /* getgroups[16] */
|
|
|
|
case 81: /* setgroups[16] */
|
|
|
|
case 95: /* fchown[16] */
|
|
|
|
case 101: /* ioperm */
|
|
|
|
case 138: /* setfsuid[16] */
|
|
|
|
case 139: /* setfsgid[16] */
|
|
|
|
case 140: /* _llseek */
|
|
|
|
case 164: /* setresuid[16] */
|
|
|
|
case 165: /* getresuid[16] */
|
|
|
|
case 170: /* setresgid[16] */
|
|
|
|
case 171: /* getresgid[16] */
|
|
|
|
case 182: /* chown[16] */
|
|
|
|
case 192: /* mmap2 */
|
|
|
|
case 193: /* truncate64 */
|
|
|
|
case 194: /* ftruncate64 */
|
|
|
|
case 195: /* stat64 */
|
|
|
|
case 196: /* lstat64 */
|
|
|
|
case 197: /* fstat64 */
|
|
|
|
case 221: /* fcntl64 */
|
|
|
|
if (abi == ABI_LINUX_S390)
|
2015-11-19 15:32:53 +01:00
|
|
|
return (enum gdb_syscall) syscall;
|
2015-11-02 17:16:07 +01:00
|
|
|
return gdb_sys_no_syscall;
|
|
|
|
/* These syscalls don't exist on s390. */
|
|
|
|
case 17: /* break */
|
|
|
|
case 18: /* oldstat */
|
|
|
|
case 28: /* oldfstat */
|
|
|
|
case 31: /* stty */
|
|
|
|
case 32: /* gtty */
|
|
|
|
case 35: /* ftime */
|
|
|
|
case 44: /* prof */
|
|
|
|
case 53: /* lock */
|
|
|
|
case 56: /* mpx */
|
|
|
|
case 58: /* ulimit */
|
|
|
|
case 59: /* oldolduname */
|
|
|
|
case 68: /* sgetmask */
|
|
|
|
case 69: /* ssetmask */
|
|
|
|
case 82: /* [old_]select */
|
|
|
|
case 84: /* oldlstat */
|
|
|
|
case 98: /* profil */
|
|
|
|
case 109: /* olduname */
|
|
|
|
case 113: /* vm86old */
|
|
|
|
case 123: /* modify_ldt */
|
|
|
|
case 166: /* vm86 */
|
|
|
|
return gdb_sys_no_syscall;
|
|
|
|
case 110:
|
|
|
|
return gdb_sys_lookup_dcookie;
|
|
|
|
/* Here come the differences. */
|
|
|
|
case 222:
|
|
|
|
return gdb_sys_readahead;
|
|
|
|
case 223:
|
|
|
|
if (abi == ABI_LINUX_S390)
|
|
|
|
return gdb_sys_sendfile64;
|
|
|
|
return gdb_sys_no_syscall;
|
|
|
|
/* 224-235 handled below */
|
|
|
|
case 236:
|
|
|
|
return gdb_sys_gettid;
|
|
|
|
case 237:
|
|
|
|
return gdb_sys_tkill;
|
|
|
|
case 238:
|
|
|
|
return gdb_sys_futex;
|
|
|
|
case 239:
|
|
|
|
return gdb_sys_sched_setaffinity;
|
|
|
|
case 240:
|
|
|
|
return gdb_sys_sched_getaffinity;
|
|
|
|
case 241:
|
|
|
|
return gdb_sys_tgkill;
|
|
|
|
/* 242 reserved */
|
|
|
|
case 243:
|
|
|
|
return gdb_sys_io_setup;
|
|
|
|
case 244:
|
|
|
|
return gdb_sys_io_destroy;
|
|
|
|
case 245:
|
|
|
|
return gdb_sys_io_getevents;
|
|
|
|
case 246:
|
|
|
|
return gdb_sys_io_submit;
|
|
|
|
case 247:
|
|
|
|
return gdb_sys_io_cancel;
|
|
|
|
case 248:
|
|
|
|
return gdb_sys_exit_group;
|
|
|
|
case 249:
|
|
|
|
return gdb_sys_epoll_create;
|
|
|
|
case 250:
|
|
|
|
return gdb_sys_epoll_ctl;
|
|
|
|
case 251:
|
|
|
|
return gdb_sys_epoll_wait;
|
|
|
|
case 252:
|
|
|
|
return gdb_sys_set_tid_address;
|
|
|
|
case 253:
|
|
|
|
return gdb_sys_fadvise64;
|
|
|
|
/* 254-262 handled below */
|
|
|
|
/* 263 reserved */
|
|
|
|
case 264:
|
|
|
|
if (abi == ABI_LINUX_S390)
|
|
|
|
return gdb_sys_fadvise64_64;
|
|
|
|
return gdb_sys_no_syscall;
|
|
|
|
case 265:
|
|
|
|
return gdb_sys_statfs64;
|
|
|
|
case 266:
|
|
|
|
return gdb_sys_fstatfs64;
|
|
|
|
case 267:
|
|
|
|
return gdb_sys_remap_file_pages;
|
|
|
|
/* 268-270 reserved */
|
|
|
|
/* 271-277 handled below */
|
|
|
|
case 278:
|
|
|
|
return gdb_sys_add_key;
|
|
|
|
case 279:
|
|
|
|
return gdb_sys_request_key;
|
|
|
|
case 280:
|
|
|
|
return gdb_sys_keyctl;
|
|
|
|
case 281:
|
|
|
|
return gdb_sys_waitid;
|
|
|
|
/* 282-312 handled below */
|
|
|
|
case 293:
|
|
|
|
if (abi == ABI_LINUX_S390)
|
|
|
|
return gdb_sys_fstatat64;
|
|
|
|
return gdb_sys_newfstatat;
|
|
|
|
/* 313+ not yet supported */
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
default:
|
|
|
|
{
|
|
|
|
int ret;
|
2001-11-13 18:47:19 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* Most "old" syscalls copied from i386. */
|
|
|
|
if (syscall <= 221)
|
|
|
|
ret = syscall;
|
|
|
|
/* xattr syscalls. */
|
|
|
|
else if (syscall >= 224 && syscall <= 235)
|
|
|
|
ret = syscall + 2;
|
|
|
|
/* timer syscalls. */
|
|
|
|
else if (syscall >= 254 && syscall <= 262)
|
|
|
|
ret = syscall + 5;
|
|
|
|
/* mq_* and kexec_load */
|
|
|
|
else if (syscall >= 271 && syscall <= 277)
|
|
|
|
ret = syscall + 6;
|
|
|
|
/* ioprio_set .. epoll_pwait */
|
|
|
|
else if (syscall >= 282 && syscall <= 312)
|
|
|
|
ret = syscall + 7;
|
|
|
|
else
|
|
|
|
ret = gdb_sys_no_syscall;
|
2015-04-27 11:38:46 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
return (enum gdb_syscall) ret;
|
|
|
|
}
|
2011-12-19 22:44:57 +01:00
|
|
|
}
|
2003-04-18 22:20:21 +02:00
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Record a system call. Returns 0 on success, -1 otherwise.
|
|
|
|
Helper function for s390_process_record. */
|
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
static int
|
|
|
|
s390_linux_syscall_record (struct regcache *regcache, LONGEST syscall_native)
|
2001-11-29 23:24:42 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
struct gdbarch *gdbarch = regcache->arch ();
|
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
int ret;
|
|
|
|
enum gdb_syscall syscall_gdb;
|
2015-04-27 11:38:47 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* On s390, syscall number can be passed either as immediate field of svc
|
|
|
|
instruction, or in %r1 (with svc 0). */
|
|
|
|
if (syscall_native == 0)
|
|
|
|
regcache_raw_read_signed (regcache, S390_R1_REGNUM, &syscall_native);
|
2011-09-21 19:00:31 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
syscall_gdb = s390_canonicalize_syscall (syscall_native, tdep->abi);
|
2011-09-21 19:00:31 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (syscall_gdb < 0)
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c (struct gdbarch_tdep): Add 'abi' member.
(S390_STACK_FRAME_OVERHEAD): Remove.
(S390_STACK_PARAMETER_ALIGNMENT): Remove.
(S390_NUM_FP_PARAMETER_REGISTERS): Remove.
(s390_promote_integer_argument): Remove.
(s390_cannot_extract_struct_value_address): Remove.
(s390_use_struct_convention, s390_store_struct_return): Remove.
(s390_extract_return_value, s390_store_return_value): Remove.
(s390_return_value_convention, s390_return_value): New functions.
(is_float_singleton): Handle typedefs.
(is_double_or_float, is_double_arg, is_simple_arg, pass_by_copy_ref):
Remove, replace by ...
(s390_function_arg_pass_by_reference, s390_function_arg_float,
s390_function_arg_integer): ... these new functions.
(s390_push_arguments, s390_push_return_address): Remove, replace by ...
(s390_push_dummy_call, s390_unwind_dummy_id): ... these new functions.
(s390_gdbarch_init): Remove s390_call_dummy_words and elf_flags.
Fill in tdep->abi.
Remove calls to:
set_gdbarch_deprecated_store_struct_return,
set_gdbarch_deprecated_extract_return_value,
set_gdbarch_deprecated_store_return_value,
set_gdbarch_use_struct_convention,
set_gdbarch_extract_struct_value_address,
set_gdbarch_deprecated_pc_in_call_dummy,
set_gdbarch_deprecated_push_arguments,
set_gdbarch_deprecated_save_dummy_frame_tos,
set_gdbarch_deprecated_push_return_address,
set_gdbarch_deprecated_sizeof_call_dummy_words,
set_gdbarch_deprecated_call_dummy_words,
set_gdbarch_deprecated_dummy_write_sp.
Add calls to:
set_gdbarch_push_dummy_call,
set_gdbarch_unwind_dummy_id,
set_gdbarch_return_value.
2004-02-18 04:54:11 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
printf_unfiltered (_("Process record and replay target doesn't "
|
|
|
|
"support syscall number %s\n"),
|
|
|
|
plongest (syscall_native));
|
|
|
|
return -1;
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c (struct gdbarch_tdep): Add 'abi' member.
(S390_STACK_FRAME_OVERHEAD): Remove.
(S390_STACK_PARAMETER_ALIGNMENT): Remove.
(S390_NUM_FP_PARAMETER_REGISTERS): Remove.
(s390_promote_integer_argument): Remove.
(s390_cannot_extract_struct_value_address): Remove.
(s390_use_struct_convention, s390_store_struct_return): Remove.
(s390_extract_return_value, s390_store_return_value): Remove.
(s390_return_value_convention, s390_return_value): New functions.
(is_float_singleton): Handle typedefs.
(is_double_or_float, is_double_arg, is_simple_arg, pass_by_copy_ref):
Remove, replace by ...
(s390_function_arg_pass_by_reference, s390_function_arg_float,
s390_function_arg_integer): ... these new functions.
(s390_push_arguments, s390_push_return_address): Remove, replace by ...
(s390_push_dummy_call, s390_unwind_dummy_id): ... these new functions.
(s390_gdbarch_init): Remove s390_call_dummy_words and elf_flags.
Fill in tdep->abi.
Remove calls to:
set_gdbarch_deprecated_store_struct_return,
set_gdbarch_deprecated_extract_return_value,
set_gdbarch_deprecated_store_return_value,
set_gdbarch_use_struct_convention,
set_gdbarch_extract_struct_value_address,
set_gdbarch_deprecated_pc_in_call_dummy,
set_gdbarch_deprecated_push_arguments,
set_gdbarch_deprecated_save_dummy_frame_tos,
set_gdbarch_deprecated_push_return_address,
set_gdbarch_deprecated_sizeof_call_dummy_words,
set_gdbarch_deprecated_call_dummy_words,
set_gdbarch_deprecated_dummy_write_sp.
Add calls to:
set_gdbarch_push_dummy_call,
set_gdbarch_unwind_dummy_id,
set_gdbarch_return_value.
2004-02-18 04:54:11 +01:00
|
|
|
}
|
2001-10-14 00:13:35 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (syscall_gdb == gdb_sys_sigreturn
|
|
|
|
|| syscall_gdb == gdb_sys_rt_sigreturn)
|
2015-04-27 11:38:47 +02:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (s390_all_but_pc_registers_record (regcache))
|
|
|
|
return -1;
|
|
|
|
return 0;
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c (struct gdbarch_tdep): Add 'abi' member.
(S390_STACK_FRAME_OVERHEAD): Remove.
(S390_STACK_PARAMETER_ALIGNMENT): Remove.
(S390_NUM_FP_PARAMETER_REGISTERS): Remove.
(s390_promote_integer_argument): Remove.
(s390_cannot_extract_struct_value_address): Remove.
(s390_use_struct_convention, s390_store_struct_return): Remove.
(s390_extract_return_value, s390_store_return_value): Remove.
(s390_return_value_convention, s390_return_value): New functions.
(is_float_singleton): Handle typedefs.
(is_double_or_float, is_double_arg, is_simple_arg, pass_by_copy_ref):
Remove, replace by ...
(s390_function_arg_pass_by_reference, s390_function_arg_float,
s390_function_arg_integer): ... these new functions.
(s390_push_arguments, s390_push_return_address): Remove, replace by ...
(s390_push_dummy_call, s390_unwind_dummy_id): ... these new functions.
(s390_gdbarch_init): Remove s390_call_dummy_words and elf_flags.
Fill in tdep->abi.
Remove calls to:
set_gdbarch_deprecated_store_struct_return,
set_gdbarch_deprecated_extract_return_value,
set_gdbarch_deprecated_store_return_value,
set_gdbarch_use_struct_convention,
set_gdbarch_extract_struct_value_address,
set_gdbarch_deprecated_pc_in_call_dummy,
set_gdbarch_deprecated_push_arguments,
set_gdbarch_deprecated_save_dummy_frame_tos,
set_gdbarch_deprecated_push_return_address,
set_gdbarch_deprecated_sizeof_call_dummy_words,
set_gdbarch_deprecated_call_dummy_words,
set_gdbarch_deprecated_dummy_write_sp.
Add calls to:
set_gdbarch_push_dummy_call,
set_gdbarch_unwind_dummy_id,
set_gdbarch_return_value.
2004-02-18 04:54:11 +01:00
|
|
|
}
|
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (tdep->abi == ABI_LINUX_ZSERIES)
|
|
|
|
ret = record_linux_system_call (syscall_gdb, regcache,
|
|
|
|
&s390x_linux_record_tdep);
|
|
|
|
else
|
|
|
|
ret = record_linux_system_call (syscall_gdb, regcache,
|
|
|
|
&s390_linux_record_tdep);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c: Include "trad-frame.h", "frame-base.h", and
"frame-unwind.h".
(s390_readinstruction): Reformat. Use read_memory_nobpt.
(GDB_TARGET_IS_ESAME, S390_GPR_SIZE, S390_FPR_SIZE): Remove.
(S390_SYSCALL_OPCODE, S390_SYSCALL_SIZE): Remove.
(S390_SIGCONTEXT_SREGS_OFFSET, S390X_SIGCONTEXT_SREGS_OFFSET,
S390_SIGREGS_FP0_OFFSET, S390X_SIGREGS_FP0_OFFSET,
S390_UC_MCONTEXT_OFFSET, S390X_UC_MCONTEXT_OFFSET,
S390_SIGNAL_FRAMESIZE,
s390_NR_sigreturn, s390_NR_rt_sigreturn): Remove.
(struct frame_extra_info): Remove.
(s390_memset_extra_info): Remove.
(op_*, op1_*, op2_* enums): Add several new opcodes.
(is_rse): Renamed to ...
(is_rsy): ... this. Support long displacements.
(is_rxe): Renamed to ...
(is_rxy): ... this. Support long displacements.
(compute_x_addr): Support long displacements.
(struct s390_prologue_data): New data type.
(s390_on_stack): Change API to use struct s390_prologue_data.
(s390_store): Reimplement.
(s390_load): New function.
(s390_get_signal_frame_info): Remove.
(s390_get_frame_info): Remove, replace by ...
(s390_analyze_prolog): ... this new function.
(s390_check_function_end): Remove.
(s390_function_start): Remove.
(s390_frameless_function_invokation): Remove.
(s390_is_sigreturn): Remove.
(s390_init_frame_pc_first): Remove.
(s390_init_frame_extra_info): Remove.
(s390_frame_init_saved_regs): Remove.
(s390_frame_saved_pc_nofix): Remove.
(s390_frame_saved_pc): Remove.
(s390_frame_chain): Remove.
(s390_fp_regnum, s390_read_fp): Remove.
(s390_pop_frame_regular, s390_pop_frame): Remove.
(s390_saved_pc_after_call): Remove.
(s390_skip_prologue): Reimplement.
(s390_in_function_epilogue_p): Support long displacements.
(struct s390_unwind_cache): New data structure.
(s390_frame_unwind_cache): New function.
(s390_prologue_frame_unwind_cache): Likewise.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_this_id, s390_frame_prev_register): Likewise.
(s390_frame_unwind): Define.
(s390_frame_sniffer): New function.
(struct s390_pltstub_unwind_cache): New data structure.
(s390_pltstub_frame_unwind_cache): New function.
(s390_pltstub_frame_this_id): Likewise.
(s390_pltstub_frame_prev_register): Likewise.
(s390_pltstub_frame_unwind): Define.
(s390_pltstub_frame_sniffer): New function.
(struct s390_sigtramp_unwind_cache): New data structure.
(s390_sigtramp_frame_unwind_cache): New function.
(s390_sigtramp_frame_this_id): Likewise.
(s390_sigtramp_frame_prev_register): Likewise.
(s390_sigtramp_frame_unwind): Define.
(s390_sigtramp_frame_sniffer): New function.
(s390_frame_base_address, s390_local_base_address): New functions.
(s390_frame_base): Define.
(s390_unwind_pc, s390_unwind_sp): New function.
(s390_push_dummy_call): Use new frame base location.
(s390_unwind_dummy_id): Likewise.
(s390_gdbarch_init): Remove calls to:
set_gdbarch_frameless_function_invocation,
set_gdbarch_deprecated_init_frame_pc,
set_gdbarch_deprecated_frame_chain,
set_gdbarch_deprecated_frame_init_saved_regs,
set_gdbarch_deprecated_pop_frame,
set_gdbarch_deprecated_init_extra_frame_info,
set_gdbarch_deprecated_init_frame_pc_first,
set_gdbarch_deprecated_target_read_fp,
set_gdbarch_deprecated_frame_saved_pc,
set_gdbarch_deprecated_saved_pc_after_call,
set_gdbarch_deprecated_fp_regnum.
Add calls to:
set_gdbarch_in_solib_call_trampoline,
frame_unwind_append_sniffer,
frame_base_set_default,
set_gdbarch_unwind_pc,
set_gdbarch_unwind_sp.
* Makefile.in (s390-tdep.o): Update dependencies.
2004-02-18 05:07:48 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (ret)
|
|
|
|
return ret;
|
2001-10-14 00:13:35 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* Record the return value of the system call. */
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_R2_REGNUM))
|
|
|
|
return -1;
|
2001-10-14 00:13:35 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
return 0;
|
2001-10-14 00:13:35 +02:00
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:44 +01:00
|
|
|
/* Implement process_record_signal gdbarch method. */
|
|
|
|
|
2003-02-03 21:35:44 +01:00
|
|
|
static int
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
s390_linux_record_signal (struct gdbarch *gdbarch, struct regcache *regcache,
|
|
|
|
enum gdb_signal signal)
|
2003-02-03 21:35:44 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
/* There are two kinds of signal frames on s390. rt_sigframe is always
|
|
|
|
the larger one, so don't even bother with sigframe. */
|
|
|
|
const int sizeof_rt_sigframe = (tdep->abi == ABI_LINUX_ZSERIES ?
|
|
|
|
160 + 8 + 128 + 1024 : 96 + 8 + 128 + 1000);
|
|
|
|
ULONGEST sp;
|
|
|
|
int i;
|
2003-02-03 21:35:44 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
for (i = 0; i < 16; i++)
|
2003-02-03 21:35:44 +01:00
|
|
|
{
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_R0_REGNUM + i))
|
|
|
|
return -1;
|
|
|
|
if (tdep->gpr_full_regnum != -1)
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_R0_UPPER_REGNUM + i))
|
|
|
|
return -1;
|
2003-02-03 21:35:44 +01:00
|
|
|
}
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_PSWA_REGNUM))
|
|
|
|
return -1;
|
|
|
|
if (record_full_arch_list_add_reg (regcache, S390_PSWM_REGNUM))
|
|
|
|
return -1;
|
2015-02-27 10:47:54 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
/* Record the change in the stack.
|
|
|
|
frame-size = sizeof (struct rt_sigframe) + SIGNAL_FRAMESIZE */
|
|
|
|
regcache_raw_read_unsigned (regcache, S390_SP_REGNUM, &sp);
|
|
|
|
sp -= sizeof_rt_sigframe;
|
2015-02-27 10:47:54 +01:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (record_full_arch_list_add_mem (sp, sizeof_rt_sigframe))
|
|
|
|
return -1;
|
2014-05-14 22:33:41 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
if (record_full_arch_list_add_end ())
|
|
|
|
return -1;
|
2012-04-27 22:47:57 +02:00
|
|
|
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
return 0;
|
2012-04-27 22:47:57 +02:00
|
|
|
}
|
|
|
|
|
2015-11-02 17:16:07 +01:00
|
|
|
/* Initialize linux_record_tdep if not initialized yet. */
|
|
|
|
|
|
|
|
static void
|
|
|
|
s390_init_linux_record_tdep (struct linux_record_tdep *record_tdep,
|
|
|
|
enum s390_abi_kind abi)
|
|
|
|
{
|
|
|
|
/* These values are the size of the type that will be used in a system
|
|
|
|
call. They are obtained from Linux Kernel source. */
|
|
|
|
|
|
|
|
if (abi == ABI_LINUX_ZSERIES)
|
|
|
|
{
|
|
|
|
record_tdep->size_pointer = 8;
|
|
|
|
/* no _old_kernel_stat */
|
|
|
|
record_tdep->size_tms = 32;
|
|
|
|
record_tdep->size_loff_t = 8;
|
|
|
|
record_tdep->size_flock = 32;
|
|
|
|
record_tdep->size_ustat = 32;
|
|
|
|
record_tdep->size_old_sigaction = 32;
|
|
|
|
record_tdep->size_old_sigset_t = 8;
|
|
|
|
record_tdep->size_rlimit = 16;
|
|
|
|
record_tdep->size_rusage = 144;
|
|
|
|
record_tdep->size_timeval = 16;
|
|
|
|
record_tdep->size_timezone = 8;
|
|
|
|
/* old_[ug]id_t never used */
|
|
|
|
record_tdep->size_fd_set = 128;
|
|
|
|
record_tdep->size_old_dirent = 280;
|
|
|
|
record_tdep->size_statfs = 88;
|
|
|
|
record_tdep->size_statfs64 = 88;
|
|
|
|
record_tdep->size_sockaddr = 16;
|
|
|
|
record_tdep->size_int = 4;
|
|
|
|
record_tdep->size_long = 8;
|
|
|
|
record_tdep->size_ulong = 8;
|
|
|
|
record_tdep->size_msghdr = 56;
|
|
|
|
record_tdep->size_itimerval = 32;
|
|
|
|
record_tdep->size_stat = 144;
|
|
|
|
/* old_utsname unused */
|
|
|
|
record_tdep->size_sysinfo = 112;
|
|
|
|
record_tdep->size_msqid_ds = 120;
|
|
|
|
record_tdep->size_shmid_ds = 112;
|
|
|
|
record_tdep->size_new_utsname = 390;
|
|
|
|
record_tdep->size_timex = 208;
|
|
|
|
record_tdep->size_mem_dqinfo = 24;
|
|
|
|
record_tdep->size_if_dqblk = 72;
|
|
|
|
record_tdep->size_fs_quota_stat = 80;
|
|
|
|
record_tdep->size_timespec = 16;
|
|
|
|
record_tdep->size_pollfd = 8;
|
|
|
|
record_tdep->size_NFS_FHSIZE = 32;
|
|
|
|
record_tdep->size_knfsd_fh = 132;
|
|
|
|
record_tdep->size_TASK_COMM_LEN = 16;
|
|
|
|
record_tdep->size_sigaction = 32;
|
|
|
|
record_tdep->size_sigset_t = 8;
|
|
|
|
record_tdep->size_siginfo_t = 128;
|
|
|
|
record_tdep->size_cap_user_data_t = 12;
|
|
|
|
record_tdep->size_stack_t = 24;
|
|
|
|
record_tdep->size_off_t = 8;
|
|
|
|
/* stat64 unused */
|
|
|
|
record_tdep->size_gid_t = 4;
|
|
|
|
record_tdep->size_uid_t = 4;
|
|
|
|
record_tdep->size_PAGE_SIZE = 0x1000; /* 4KB */
|
|
|
|
record_tdep->size_flock64 = 32;
|
|
|
|
record_tdep->size_io_event = 32;
|
|
|
|
record_tdep->size_iocb = 64;
|
|
|
|
record_tdep->size_epoll_event = 16;
|
|
|
|
record_tdep->size_itimerspec = 32;
|
|
|
|
record_tdep->size_mq_attr = 64;
|
|
|
|
record_tdep->size_termios = 36;
|
|
|
|
record_tdep->size_termios2 = 44;
|
|
|
|
record_tdep->size_pid_t = 4;
|
|
|
|
record_tdep->size_winsize = 8;
|
|
|
|
record_tdep->size_serial_struct = 72;
|
|
|
|
record_tdep->size_serial_icounter_struct = 80;
|
|
|
|
record_tdep->size_size_t = 8;
|
|
|
|
record_tdep->size_iovec = 16;
|
|
|
|
record_tdep->size_time_t = 8;
|
|
|
|
}
|
|
|
|
else if (abi == ABI_LINUX_S390)
|
|
|
|
{
|
|
|
|
record_tdep->size_pointer = 4;
|
|
|
|
record_tdep->size__old_kernel_stat = 32;
|
|
|
|
record_tdep->size_tms = 16;
|
|
|
|
record_tdep->size_loff_t = 8;
|
|
|
|
record_tdep->size_flock = 16;
|
|
|
|
record_tdep->size_ustat = 20;
|
|
|
|
record_tdep->size_old_sigaction = 16;
|
|
|
|
record_tdep->size_old_sigset_t = 4;
|
|
|
|
record_tdep->size_rlimit = 8;
|
|
|
|
record_tdep->size_rusage = 72;
|
|
|
|
record_tdep->size_timeval = 8;
|
|
|
|
record_tdep->size_timezone = 8;
|
|
|
|
record_tdep->size_old_gid_t = 2;
|
|
|
|
record_tdep->size_old_uid_t = 2;
|
|
|
|
record_tdep->size_fd_set = 128;
|
|
|
|
record_tdep->size_old_dirent = 268;
|
|
|
|
record_tdep->size_statfs = 64;
|
|
|
|
record_tdep->size_statfs64 = 88;
|
|
|
|
record_tdep->size_sockaddr = 16;
|
|
|
|
record_tdep->size_int = 4;
|
|
|
|
record_tdep->size_long = 4;
|
|
|
|
record_tdep->size_ulong = 4;
|
|
|
|
record_tdep->size_msghdr = 28;
|
|
|
|
record_tdep->size_itimerval = 16;
|
|
|
|
record_tdep->size_stat = 64;
|
|
|
|
/* old_utsname unused */
|
|
|
|
record_tdep->size_sysinfo = 64;
|
|
|
|
record_tdep->size_msqid_ds = 88;
|
|
|
|
record_tdep->size_shmid_ds = 84;
|
|
|
|
record_tdep->size_new_utsname = 390;
|
|
|
|
record_tdep->size_timex = 128;
|
|
|
|
record_tdep->size_mem_dqinfo = 24;
|
|
|
|
record_tdep->size_if_dqblk = 72;
|
|
|
|
record_tdep->size_fs_quota_stat = 80;
|
|
|
|
record_tdep->size_timespec = 8;
|
|
|
|
record_tdep->size_pollfd = 8;
|
|
|
|
record_tdep->size_NFS_FHSIZE = 32;
|
|
|
|
record_tdep->size_knfsd_fh = 132;
|
|
|
|
record_tdep->size_TASK_COMM_LEN = 16;
|
|
|
|
record_tdep->size_sigaction = 20;
|
|
|
|
record_tdep->size_sigset_t = 8;
|
|
|
|
record_tdep->size_siginfo_t = 128;
|
|
|
|
record_tdep->size_cap_user_data_t = 12;
|
|
|
|
record_tdep->size_stack_t = 12;
|
|
|
|
record_tdep->size_off_t = 4;
|
|
|
|
record_tdep->size_stat64 = 104;
|
|
|
|
record_tdep->size_gid_t = 4;
|
|
|
|
record_tdep->size_uid_t = 4;
|
|
|
|
record_tdep->size_PAGE_SIZE = 0x1000; /* 4KB */
|
|
|
|
record_tdep->size_flock64 = 32;
|
|
|
|
record_tdep->size_io_event = 32;
|
|
|
|
record_tdep->size_iocb = 64;
|
|
|
|
record_tdep->size_epoll_event = 16;
|
|
|
|
record_tdep->size_itimerspec = 16;
|
|
|
|
record_tdep->size_mq_attr = 32;
|
|
|
|
record_tdep->size_termios = 36;
|
|
|
|
record_tdep->size_termios2 = 44;
|
|
|
|
record_tdep->size_pid_t = 4;
|
|
|
|
record_tdep->size_winsize = 8;
|
|
|
|
record_tdep->size_serial_struct = 60;
|
|
|
|
record_tdep->size_serial_icounter_struct = 80;
|
|
|
|
record_tdep->size_size_t = 4;
|
|
|
|
record_tdep->size_iovec = 8;
|
|
|
|
record_tdep->size_time_t = 4;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* These values are the second argument of system call "sys_fcntl"
|
|
|
|
and "sys_fcntl64". They are obtained from Linux Kernel source. */
|
|
|
|
record_tdep->fcntl_F_GETLK = 5;
|
|
|
|
record_tdep->fcntl_F_GETLK64 = 12;
|
|
|
|
record_tdep->fcntl_F_SETLK64 = 13;
|
|
|
|
record_tdep->fcntl_F_SETLKW64 = 14;
|
|
|
|
|
|
|
|
record_tdep->arg1 = S390_R2_REGNUM;
|
|
|
|
record_tdep->arg2 = S390_R3_REGNUM;
|
|
|
|
record_tdep->arg3 = S390_R4_REGNUM;
|
|
|
|
record_tdep->arg4 = S390_R5_REGNUM;
|
|
|
|
record_tdep->arg5 = S390_R6_REGNUM;
|
|
|
|
|
|
|
|
/* These values are the second argument of system call "sys_ioctl".
|
|
|
|
They are obtained from Linux Kernel source.
|
|
|
|
See arch/s390/include/uapi/asm/ioctls.h. */
|
|
|
|
|
|
|
|
record_tdep->ioctl_TCGETS = 0x5401;
|
|
|
|
record_tdep->ioctl_TCSETS = 0x5402;
|
|
|
|
record_tdep->ioctl_TCSETSW = 0x5403;
|
|
|
|
record_tdep->ioctl_TCSETSF = 0x5404;
|
|
|
|
record_tdep->ioctl_TCGETA = 0x5405;
|
|
|
|
record_tdep->ioctl_TCSETA = 0x5406;
|
|
|
|
record_tdep->ioctl_TCSETAW = 0x5407;
|
|
|
|
record_tdep->ioctl_TCSETAF = 0x5408;
|
|
|
|
record_tdep->ioctl_TCSBRK = 0x5409;
|
|
|
|
record_tdep->ioctl_TCXONC = 0x540a;
|
|
|
|
record_tdep->ioctl_TCFLSH = 0x540b;
|
|
|
|
record_tdep->ioctl_TIOCEXCL = 0x540c;
|
|
|
|
record_tdep->ioctl_TIOCNXCL = 0x540d;
|
|
|
|
record_tdep->ioctl_TIOCSCTTY = 0x540e;
|
|
|
|
record_tdep->ioctl_TIOCGPGRP = 0x540f;
|
|
|
|
record_tdep->ioctl_TIOCSPGRP = 0x5410;
|
|
|
|
record_tdep->ioctl_TIOCOUTQ = 0x5411;
|
|
|
|
record_tdep->ioctl_TIOCSTI = 0x5412;
|
|
|
|
record_tdep->ioctl_TIOCGWINSZ = 0x5413;
|
|
|
|
record_tdep->ioctl_TIOCSWINSZ = 0x5414;
|
|
|
|
record_tdep->ioctl_TIOCMGET = 0x5415;
|
|
|
|
record_tdep->ioctl_TIOCMBIS = 0x5416;
|
|
|
|
record_tdep->ioctl_TIOCMBIC = 0x5417;
|
|
|
|
record_tdep->ioctl_TIOCMSET = 0x5418;
|
|
|
|
record_tdep->ioctl_TIOCGSOFTCAR = 0x5419;
|
|
|
|
record_tdep->ioctl_TIOCSSOFTCAR = 0x541a;
|
|
|
|
record_tdep->ioctl_FIONREAD = 0x541b;
|
|
|
|
record_tdep->ioctl_TIOCINQ = 0x541b; /* alias */
|
|
|
|
record_tdep->ioctl_TIOCLINUX = 0x541c;
|
|
|
|
record_tdep->ioctl_TIOCCONS = 0x541d;
|
|
|
|
record_tdep->ioctl_TIOCGSERIAL = 0x541e;
|
|
|
|
record_tdep->ioctl_TIOCSSERIAL = 0x541f;
|
|
|
|
record_tdep->ioctl_TIOCPKT = 0x5420;
|
|
|
|
record_tdep->ioctl_FIONBIO = 0x5421;
|
|
|
|
record_tdep->ioctl_TIOCNOTTY = 0x5422;
|
|
|
|
record_tdep->ioctl_TIOCSETD = 0x5423;
|
|
|
|
record_tdep->ioctl_TIOCGETD = 0x5424;
|
|
|
|
record_tdep->ioctl_TCSBRKP = 0x5425;
|
|
|
|
record_tdep->ioctl_TIOCSBRK = 0x5427;
|
|
|
|
record_tdep->ioctl_TIOCCBRK = 0x5428;
|
|
|
|
record_tdep->ioctl_TIOCGSID = 0x5429;
|
|
|
|
record_tdep->ioctl_TCGETS2 = 0x802c542a;
|
|
|
|
record_tdep->ioctl_TCSETS2 = 0x402c542b;
|
|
|
|
record_tdep->ioctl_TCSETSW2 = 0x402c542c;
|
|
|
|
record_tdep->ioctl_TCSETSF2 = 0x402c542d;
|
|
|
|
record_tdep->ioctl_TIOCGPTN = 0x80045430;
|
|
|
|
record_tdep->ioctl_TIOCSPTLCK = 0x40045431;
|
|
|
|
record_tdep->ioctl_FIONCLEX = 0x5450;
|
|
|
|
record_tdep->ioctl_FIOCLEX = 0x5451;
|
|
|
|
record_tdep->ioctl_FIOASYNC = 0x5452;
|
|
|
|
record_tdep->ioctl_TIOCSERCONFIG = 0x5453;
|
|
|
|
record_tdep->ioctl_TIOCSERGWILD = 0x5454;
|
|
|
|
record_tdep->ioctl_TIOCSERSWILD = 0x5455;
|
|
|
|
record_tdep->ioctl_TIOCGLCKTRMIOS = 0x5456;
|
|
|
|
record_tdep->ioctl_TIOCSLCKTRMIOS = 0x5457;
|
|
|
|
record_tdep->ioctl_TIOCSERGSTRUCT = 0x5458;
|
|
|
|
record_tdep->ioctl_TIOCSERGETLSR = 0x5459;
|
|
|
|
record_tdep->ioctl_TIOCSERGETMULTI = 0x545a;
|
|
|
|
record_tdep->ioctl_TIOCSERSETMULTI = 0x545b;
|
|
|
|
record_tdep->ioctl_TIOCMIWAIT = 0x545c;
|
|
|
|
record_tdep->ioctl_TIOCGICOUNT = 0x545d;
|
|
|
|
record_tdep->ioctl_FIOQSIZE = 0x545e;
|
|
|
|
}
|
|
|
|
|
2018-01-23 13:37:43 +01:00
|
|
|
/* Initialize OSABI common for GNU/Linux on 31- and 64-bit systems. */
|
2010-08-04 22:40:57 +02:00
|
|
|
|
2018-01-23 13:37:43 +01:00
|
|
|
static void
|
|
|
|
s390_linux_init_abi_any (struct gdbarch_info info, struct gdbarch *gdbarch)
|
|
|
|
{
|
2018-01-23 13:37:43 +01:00
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
|
|
|
|
tdep->s390_syscall_record = s390_linux_syscall_record;
|
|
|
|
|
2018-01-23 13:37:43 +01:00
|
|
|
linux_init_abi (info, gdbarch);
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
|
2018-01-23 13:37:43 +01:00
|
|
|
/* Register handling. */
|
|
|
|
set_gdbarch_core_read_description (gdbarch, s390_core_read_description);
|
|
|
|
set_gdbarch_iterate_over_regset_sections (gdbarch,
|
|
|
|
s390_iterate_over_regset_sections);
|
|
|
|
set_gdbarch_write_pc (gdbarch, s390_write_pc);
|
|
|
|
set_gdbarch_cannot_store_register (gdbarch, s390_cannot_store_register);
|
2004-02-17 Ulrich Weigand <Ulrich.Weigand@de.ibm.com>
Committed by Jim Blandy <jimb@redhat.com>.
* s390-tdep.c (struct gdbarch_tdep): Add 'abi' member.
(S390_STACK_FRAME_OVERHEAD): Remove.
(S390_STACK_PARAMETER_ALIGNMENT): Remove.
(S390_NUM_FP_PARAMETER_REGISTERS): Remove.
(s390_promote_integer_argument): Remove.
(s390_cannot_extract_struct_value_address): Remove.
(s390_use_struct_convention, s390_store_struct_return): Remove.
(s390_extract_return_value, s390_store_return_value): Remove.
(s390_return_value_convention, s390_return_value): New functions.
(is_float_singleton): Handle typedefs.
(is_double_or_float, is_double_arg, is_simple_arg, pass_by_copy_ref):
Remove, replace by ...
(s390_function_arg_pass_by_reference, s390_function_arg_float,
s390_function_arg_integer): ... these new functions.
(s390_push_arguments, s390_push_return_address): Remove, replace by ...
(s390_push_dummy_call, s390_unwind_dummy_id): ... these new functions.
(s390_gdbarch_init): Remove s390_call_dummy_words and elf_flags.
Fill in tdep->abi.
Remove calls to:
set_gdbarch_deprecated_store_struct_return,
set_gdbarch_deprecated_extract_return_value,
set_gdbarch_deprecated_store_return_value,
set_gdbarch_use_struct_convention,
set_gdbarch_extract_struct_value_address,
set_gdbarch_deprecated_pc_in_call_dummy,
set_gdbarch_deprecated_push_arguments,
set_gdbarch_deprecated_save_dummy_frame_tos,
set_gdbarch_deprecated_push_return_address,
set_gdbarch_deprecated_sizeof_call_dummy_words,
set_gdbarch_deprecated_call_dummy_words,
set_gdbarch_deprecated_dummy_write_sp.
Add calls to:
set_gdbarch_push_dummy_call,
set_gdbarch_unwind_dummy_id,
set_gdbarch_return_value.
2004-02-18 04:54:11 +01:00
|
|
|
|
2018-01-23 13:37:43 +01:00
|
|
|
/* Syscall handling. */
|
|
|
|
set_gdbarch_get_syscall_number (gdbarch, s390_linux_get_syscall_number);
|
2001-10-14 00:13:35 +02:00
|
|
|
|
2018-01-23 13:37:43 +01:00
|
|
|
/* Frame handling. */
|
|
|
|
frame_unwind_append_unwinder (gdbarch, &s390_sigtramp_frame_unwind);
|
2006-11-28 22:41:03 +01:00
|
|
|
set_gdbarch_skip_trampoline_code (gdbarch, find_solib_trampoline_target);
|
|
|
|
|
2005-03-31 21:58:26 +02:00
|
|
|
/* Enable TLS support. */
|
|
|
|
set_gdbarch_fetch_tls_load_module_address (gdbarch,
|
2013-10-30 18:51:57 +01:00
|
|
|
svr4_fetch_objfile_link_map);
|
2005-03-31 21:58:26 +02:00
|
|
|
|
2015-11-02 17:16:07 +01:00
|
|
|
/* Support reverse debugging. */
|
|
|
|
set_gdbarch_process_record_signal (gdbarch, s390_linux_record_signal);
|
|
|
|
s390_init_linux_record_tdep (&s390_linux_record_tdep, ABI_LINUX_S390);
|
|
|
|
s390_init_linux_record_tdep (&s390x_linux_record_tdep, ABI_LINUX_ZSERIES);
|
2018-01-23 13:37:43 +01:00
|
|
|
}
|
2015-11-02 17:16:07 +01:00
|
|
|
|
2018-01-23 13:37:43 +01:00
|
|
|
/* Initialize OSABI for GNU/Linux on 31-bit systems. */
|
2017-02-28 19:32:07 +01:00
|
|
|
|
2018-01-23 13:37:43 +01:00
|
|
|
static void
|
|
|
|
s390_linux_init_abi_31 (struct gdbarch_info info, struct gdbarch *gdbarch)
|
|
|
|
{
|
|
|
|
const struct target_desc *tdesc = info.target_desc;
|
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
|
|
|
|
tdep->abi = ABI_LINUX_S390;
|
|
|
|
|
|
|
|
s390_linux_init_abi_any (info, gdbarch);
|
|
|
|
|
|
|
|
set_solib_svr4_fetch_link_map_offsets (gdbarch,
|
|
|
|
svr4_ilp32_fetch_link_map_offsets);
|
|
|
|
set_xml_syscall_file_name (gdbarch, XML_SYSCALL_FILENAME_S390);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Initialize OSABI for GNU/Linux on 64-bit systems. */
|
|
|
|
|
|
|
|
static void
|
|
|
|
s390_linux_init_abi_64 (struct gdbarch_info info, struct gdbarch *gdbarch)
|
|
|
|
{
|
|
|
|
const struct target_desc *tdesc = info.target_desc;
|
|
|
|
struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch);
|
|
|
|
|
|
|
|
tdep->abi = ABI_LINUX_ZSERIES;
|
|
|
|
|
|
|
|
s390_linux_init_abi_any (info, gdbarch);
|
|
|
|
|
|
|
|
set_solib_svr4_fetch_link_map_offsets (gdbarch,
|
|
|
|
svr4_lp64_fetch_link_map_offsets);
|
|
|
|
set_xml_syscall_file_name (gdbarch, XML_SYSCALL_FILENAME_S390X);
|
2001-10-14 00:13:35 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
s390: Split up s390-linux-tdep.c into two files
Currently all target dependent code for s390 is in one file,
s390-linux-tdep.c. This includes code general for the architecture as
well as code specific for uses in GNU/Linux (user space). Up until now
this was OK as GNU/Linux was the only supported OS. In preparation to
support the new Linux kernel 'OS' split up the existing s390 code into a
general s390-tdep and a GNU/Linux-specific s390-linux-tdep.
Note: The record-replay feature will be moved in a separate patch. This
is simply due to the fact that the combined patch would be too large for
the mailing list. This requires setting the process_record hook during
OSABI init to keep the code bisectable. The patch moving record-replay
cleans up this hack.
gdb/ChangeLog:
* s390-linux-nat.c (s390-tdep.h): New include.
* Makefile.in (ALL_TARGET_OBS): Add s390-tdep.o.
(HFILES_NO_SRCDIR): Add s390-tdep.h.
(ALLDEPFILES): Add s390-tdep.c.
* configure.tgt (s390*-*-linux*): Add s390-tdep.o.
* s390-linux-tdep.h (HWCAP_S390_*, S390_*_REGNUM): Move to...
* s390-tdep.h: ...this. New file.
* s390-linux-tdep.c (s390-tdep.h): New include.
(_initialize_s390_tdep): Rename to...
(_initialize_s390_linux_tdep): ...this and adjust.
(s390_abi_kind, s390_vector_abi_kind, gdbarch_tdep)
(enum named opcodes, S390_NUM_GPRS, S390_NUM_FPRS): Move to
s390-tdep.h.
(s390_break_insn, s390_breakpoint, s390_readinstruction, is_ri)
(is_ril, is_rr, is_rre, is_rs, is_rsy, is_rx, is_rxy)
(s390_is_partial_instruction, s390_software_single_step)
(is_non_branch_ril, s390_displaced_step_copy_insn)
(s390_displaced_step_fixup, s390_displaced_step_hw_singlestep)
(s390_prologue_data, s390_addr, s390_store, s390_load)
(s390_check_for_saved, s390_analyze_prologue, s390_skip_prologue)
(s390_register_call_saved, s390_guess_tracepoint_registers)
(s390_register_name, s390_dwarf_regmap, s390_dwarf_reg_to_regnum)
(regnum_is_gpr_full, regnum_is_vxr_full, s390_value_from_register)
(s390_pseudo_register_name, s390_pseudo_register_type)
(s390_pseudo_register_read, s390_pseudo_register_write)
(s390_pseudo_register_reggroup_p, s390_ax_pseudo_register_collect)
(s390_ax_pseudo_register_push_stack, s390_gen_return_address)
(s390_addr_bits_remove, s390_address_class_type_flags)
(s390_address_class_type_flags_to_name)
(s390_address_class_name_to_type_flags, s390_effective_inner_type)
(s390_function_arg_float, s390_function_arg_vector)
(is_power_of_two, s390_function_arg_integer, s390_arg_state)
(s390_handle_arg, s390_push_dummy_call, s390_dummy_id)
(s390_frame_align, s390_register_return_value, s390_return_value)
(s390_stack_frame_destroyed_p, s390_unwind_pc, s390_unwind_sp)
(s390_unwind_pseudo_register, s390_adjust_frame_regnum)
(s390_dwarf2_prev_register, s390_dwarf2_frame_init_reg)
(s390_trad_frame_prev_register, s390_unwind_cache)
(s390_prologue_frame_unwind_cache)
(s390_backchain_frame_unwind_cache, s390_frame_unwind_cache)
(s390_frame_this_id, s390_frame_prev_register, s390_frame_unwind)
(s390_stub_unwind_cache, s390_stub_frame_unwind_cache)
(s390_stub_frame_this_id, s390_stub_frame_prev_register)
(s390_stub_frame_sniffer, s390_stub_frame_unwind)
(s390_frame_base_address, s390_local_base_address)
(s390_frame_base, s390_gcc_target_options)
(s390_gnu_triplet_regexp, s390_stap_is_single_operand)
(s390_validate_reg_range, s390_tdesc_valid)
(s390_gdbarch_tdep_alloc, s390_gdbarch_init): Move to...
* s390-tdep.c: ...this. New file.
2018-01-23 13:37:43 +01:00
|
|
|
_initialize_s390_linux_tdep (void)
|
2001-10-14 00:13:35 +02:00
|
|
|
{
|
2018-01-23 13:37:43 +01:00
|
|
|
/* Hook us into the OSABI mechanism. */
|
|
|
|
gdbarch_register_osabi (bfd_arch_s390, bfd_mach_s390_31, GDB_OSABI_LINUX,
|
|
|
|
s390_linux_init_abi_31);
|
|
|
|
gdbarch_register_osabi (bfd_arch_s390, bfd_mach_s390_64, GDB_OSABI_LINUX,
|
|
|
|
s390_linux_init_abi_64);
|
|
|
|
|
2011-12-07 14:31:05 +01:00
|
|
|
/* Initialize the GNU/Linux target descriptions. */
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
initialize_tdesc_s390_linux32v1 ();
|
|
|
|
initialize_tdesc_s390_linux32v2 ();
|
* features/Makefile (WHICH): Add s390-linux32, s390-linux64,
and s390x-linux64.
(s390-linux32-expedite): Define.
(s390-linux64-expedite): Define.
(s390x-linux64-expedite): Define.
* features/s390-acr.xml: New file.
* features/s390-fpr.xml: New file.
* features/s390-core32.xml: New file.
* features/s390-core64.xml: New file.
* features/s390x-core64.xml: New file.
* features/s390-linux32.xml: New file.
* features/s390-linux64.xml: New file.
* features/s390x-linux64.xml: New file.
* features/s390-linux32.c: New generated file.
* features/s390-linux64.c: New generated file.
* features/s390x-linux64.c: New generated file.
* regformats/s390-linux32.dat: New generated file.
* regformats/s390-linux64.dat: New generated file.
* regformats/s390x-linux64.dat: New generated file.
* regformats/reg-s390.dat: Remove.
* regformats/reg-s390x.dat: Remove.
* s390-nat.c: Include "auxv.h" and <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(s390_target_wordsize): New function.
(s390_auxv_parse): Likewise.
(s390_get_hwcap): Likewise.
(s390_read_description): Likewise.
(_initialize_s390_nat): Install s390_auxv_parse and
s390_read_description.
* s390-tdep.c: Include "features/s390-linux32.c",
"features/s390-linux64.c", and "features/s390x-linux64.c".
(struct gdbarch_tdep): Add gpr_full_regnum, pc_regnum, and cc_regnum.
(s390_register_call_saved): New function.
(s390_register_name): Remove.
(s390_register_type): Remove.
(s390_dwarf_regmap): Add lower half GPR pseudo DWARF CFI regnums.
(s390_dwarf_reg_to_regnum): Remap GPR regnums to full GPRs.
(s390_adjust_frame_regnum): Remap GPR regnums to lower halves for CFI.
(s390_pseudo_register_name): New function.
(s390_pseudo_register_type): New function.
(s390_pseudo_register_read): Handle both 32-bit and 64-bit cases.
Handle full GPR pesudos and varying pseudo register numbers.
(s390_pseudo_register_write): Likewise
(s390x_pseudo_register_read): Remove.
(s390x_pseudo_register_write): Likewise.
(s390_register_group): Remove.
(s390_pseudo_register_group): New function.
(s390_regmap_gregset): Add GPR upper halves.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): New global variable.
(s390_upper_regset): New global variable.
(s390_upper_regset_sections): New global variable.
(s390_regset_from_core_section): Handle GPR upper halves.
(s390_core_read_description): New function.
(s390_prologue_frame_unwind_cache): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
(s390_backchain_frame_unwind_cache): Likewise.
(s390_frame_prev_register): Unwind full GPRs to show lower halves.
(s390_stub_frame_unwind_cache): Handle varying pseudo register numbers.
(s390_sigtramp_frame_unwind_cache): Unwind PSWM and PSWA as well as
PC and CC pseudos. Unwind upper halves and full GPRs as appropriate.
Handle varying pseudo register numbers.
(s390_unwind_pc): Handle varying pseudo register numbers.
(s390_dwarf2_prev_register): New function.
(s390_dwarf2_frame_init_reg): Set up ABI call-saved/clobbered
register information. Handle varying pseudo register numbers.
Install s390_dwarf2_prev_register to unwind full GPRs.
(s390_gdbarch_init): Handle target descriptions. Assign varying
pseudo register numbers. Install s390_adjust_frame_regnum.
(_initialize_s390_tdep): Initialize target descriptions.
* s390-tdep.h (S390_R0_UPPER_REGNUM .. S390_R15_UPPER_REGNUM): Define.
(S390_NUM_REGS): Redefine to include upper half registers.
(S390_PC_REGNUM, S390_CC_REGNUM): Remove.
(S390_NUM_PSEUDO_REGS, S390_NUM_TOTAL_REGS): Likewise.
(tdesc_s390_linux32): Add declaration.
(tdesc_s390_linux64): Likewise.
(tdesc_s390x_linux64): Likewise.
gdb/testsuite/
* gdb.xml/tdesc-regs.exp: Support s390*-*-* targets.
gdbserver/
* Makefile.in (clean): Remove new generated files.
(reg-s390.o, reg-s390.c): Remove rules.
(reg-s390x.o, reg-s390x.c): Likewise.
(s390-linux32.o, s390-linux32.c): Add rules.
(s390-linux64.o, s390-linux64.c): Likewise.
(s390x-linux64.o, s390x-linux64.c): Likewise.
* configure.srv (s390*-*-linux*): Update srv_regobj and srv_xmlfiles.
* linux-s390-low.c: Include <elf.h>.
(HWCAP_S390_HIGH_GPRS): Define if undefined.
(init_registers_s390): Remove prototype.
(init_registers_s390x): Likewise.
(init_registers_s390_linux32): Add prototype.
(init_registers_s390_linux64): Likewise.
(init_registers_s390x_linux64): Likewise.
(s390_num_regs_3264): New define.
(s390_regmap_3264): New global variable.
(s390_cannot_fetch_register): Remove obsolete check.
(s390_cannot_store_register): Likewise.
(s390_collect_ptrace_register): Handle upper/lower register halves.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Update to register number changes.
(s390_get_hwcap): New routine.
(s390_arch_setup): Detect 32-bit process running on 64-bit system.
Install appropriate regmap and register set.
2010-01-04 16:03:01 +01:00
|
|
|
initialize_tdesc_s390_linux64 ();
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
initialize_tdesc_s390_linux64v1 ();
|
|
|
|
initialize_tdesc_s390_linux64v2 ();
|
2013-09-13 16:17:31 +02:00
|
|
|
initialize_tdesc_s390_te_linux64 ();
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
initialize_tdesc_s390_vx_linux64 ();
|
|
|
|
initialize_tdesc_s390_tevx_linux64 ();
|
2017-09-25 16:02:23 +02:00
|
|
|
initialize_tdesc_s390_gs_linux64 ();
|
ChangeLog:
* s390-tdep.h (S390_ORIG_R2_REGNUM): Define.
(S390_LAST_BREAK_REGNUM): Likewise.
(S390_SYSTEM_CALL_REGNUM): Likewise.
(S390_NUM_REGS): Update.
(s390_regmap_last_break): Add declaration.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(tdesc_s390_linux32v1): Add declaration.
(tdesc_s390_linux32v2): Likewise.
(tdesc_s390_linux64v1): Likewise.
(tdesc_s390_linux64v2): Likewise.
(tdesc_s390x_linux64v1): Likewise.
(tdesc_s390x_linux64v2): Likewise.
* s390-tdep.c: Include new target description files
"features/s390-linux32v1.c", "features/s390-linux32v2.c",
"features/s390-linux64v1.c", "features/s390-linux64v2.c",
"features/s390x-linux64v1.c", and "features/s390x-linux64v2.c".
(s390_cannot_store_register): New function.
(s390_write_pc): Likewise.
(s390_dwarf_regmap): Add fields for new registers.
(s390_regmap_gregset): Likewise.
(s390x_regmap_gregset): Likewise.
(s390_regmap_fpregset): Likewise.
(s390_regmap_upper): Likewise.
(s390_regmap_last_break): New variable.
(s390x_regmap_last_break): Likewise.
(s390_regmap_system_call): Likewise.
(s390_last_break_regset): Likewise.
(s390x_last_break_regset): Likewise.
(s390_system_call_regset): Likewise.
(s390_upper_regset_sections): Rename to ...
(s390_linux64_regset_sections): ... this.
(s390_linux32_regset_sections): New variable.
(s390x_linux64_regset_sections): Likewise.
(s390_linux32v1_regset_sections): Likewise.
(s390_linux32v2_regset_sections): Likewise.
(s390_linux64v1_regset_sections): Likewise.
(s390_linux64v2_regset_sections): Likewise.
(s390x_linux64v1_regset_sections): Likewise.
(s390x_linux64v2_regset_sections): Likewise.
(s390_regset_from_core_section): Handle .reg-s390-last-break and
.reg-s390-system-call core file sections.
(s390_core_read_description): Check for presence of
.reg-s390-last-break and .reg-s390-system-call core file
sections and return appropriate target description.
(s390_gdbarch_init): Detect Linux-specific registers "orig_r2",
"last_break" and "system_call" in target description. Install
appropriate gdbarch_core_regset_sections array.
Call set_gdbarch_cannot_store_register and set_gdbarch_write_pc.
(_initialize_s390_tdep): Initialize additional target descriptions.
* s390-nat.c: Include "elf/common.h".
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(have_regset_last_break): New static variable.
(have_regset_system_call): Likewise.
(s390_native_supply): Handle S390_ORIG_R2_REGNUM.
(s390_native_collect): Likewise.
(fetch_regset, store_regset, check_regset): New functions.
(s390_linux_fetch_inferior_registers): Handle S390_LAST_BREAK_REGNUM
and S390_SYSTEM_CALL_REGNUM.
(s390_linux_store_inferior_registers): Likewise.
(s390_read_description): Check for presence of NT_S390_LAST_BREAK
and NT_S390_SYSTEM_CALL regsets and use appropriate description.
* features/Makefile (WHICH): Add s390-linux32v1, s390-linux64v1,
s390x-linux64v1, s390-linux32v2, s390-linux64v2, and s390x-linux64v2.
(s390-linux32v1-expedite): Define.
(s390-linux32v2-expedite): Likewise.
(s390-linux64v1-expedite): Likewise.
(s390-linux64v2-expedite): Likewise.
(s390x-linux64v1-expedite): Likewise.
(s390x-linux64v2-expedite): Likewise.
* features/s390-linux32.xml: Add orig_r2 register.
* features/s390-linux64.xml: Likewise.
* features/s390x-linux64.xml: Likewise.
* features/s390-linux32v1.xml: New file.
* features/s390-linux32v2.xml: Likewise.
* features/s390-linux64v1.xml: Likewise.
* features/s390-linux64v2.xml: Likewise.
* features/s390x-linux64v1.xml: Likewise.
* features/s390x-linux64v2.xml: Likewise.
* features/s390-linux32.c: Regenerate.
* features/s390-linux64.c: Likewise.
* features/s390x-linux64.c: Likewise.
* features/s390-linux32v1.c: New generated file.
* features/s390-linux32v2.c: Likewise.
* features/s390-linux64v1.c: Likewise.
* features/s390-linux64v2.c: Likewise.
* features/s390x-linux64v1.c: Likewise.
* features/s390x-linux64v2.c: Likewise.
* regformats/s390-linux32.dat: Regenerate.
* regformats/s390-linux64.dat: Regenerate.
* regformats/s390x-linux64.dat: Regenerate.
* regformats/s390-linux32v1.dat: New generated file.
* regformats/s390-linux32v2.dat: Likewise.
* regformats/s390-linux64v1.dat: Likewise.
* regformats/s390-linux64v2.dat: Likewise.
* regformats/s390x-linux64v1.dat: Likewise.
* regformats/s390x-linux64v2.dat: Likewise.
gdbserver/ChangeLog:
* Makefile.in (s390-linux32v1.o, s390-linux32v1.c): New rules.
(s390-linux32v2.o, s390-linux32v2.c): Likewise.
(s390-linux64v1.o, s390-linux64v1.c): Likewise.
(s390-linux64v2.o, s390-linux64v2.c): Likewise.
(s390x-linux64v1.o, s390x-linux64v1.c): Likewise.
(s390x-linux64v2.o, s390x-linux64v2.c): Likewise.
* configure.srv [s390*-*-linux*] (srv_regobj): Add new objects.
(srv_xmlfiles): Add new XML files.
* linux-s390-low.c: Include "elf/common.h", <sys/ptrace.h>,
and <sys/uio.h>.
(PTRACE_GETREGSET, PTRACE_SETREGSET): Define if undefined.
(init_registers_s390_linux32v1): Add prototype.
(init_registers_s390_linux32v2): Likewise.
(init_registers_s390_linux64v1): Likewise.
(init_registers_s390_linux64v2): Likewise.
(init_registers_s390x_linux64v1): Likewise.
(init_registers_s390x_linux64v2): Likewise.
(s390_num_regs): Increment to 52.
(s390_regmap): Add orig_r2 register.
(s390_num_regs_3264): Increment to 68.
(s390_regmap_3264): Add orig_r2 register.
(s390_collect_ptrace_register): Handle orig_r2 register.
(s390_supply_ptrace_register): Likewise.
(s390_fill_last_break): New function.
(s390_store_last_break): Likewise.
(s390_fill_system_call): New function.
(s390_store_system_call): Likewise.
(target_regsets): Handle NT_S390_LAST_BREAK and NT_S390_SYSTEM_CALL
register sets.
(s390_check_regset): New function.
(s390_arch_setup): Check for presence of NT_S390_LAST_BREAK and
NT_S390_SYSTEM_CALL regsets and use appropriate description.
Update target_regsets for available register sets.
testsuite/ChangeLog:
* gdb.base/callfuncs.exp (fetch_all_registers): Filter out read-only
last_break register on s390*-*-* targets.
2011-12-06 15:14:50 +01:00
|
|
|
initialize_tdesc_s390x_linux64v1 ();
|
|
|
|
initialize_tdesc_s390x_linux64v2 ();
|
2013-09-13 16:17:31 +02:00
|
|
|
initialize_tdesc_s390x_te_linux64 ();
|
S390: Add vector register support to gdb
Recognize S/390 targets with the new vector feature and present their
vector registers appropriately: as 32 new 128-bit wide registers
v0-v31, where the first 16 embed the floating point registers f0-f15.
Each of the full registers v0-v15 is modelled as a pseudo register.
gdb/ChangeLog:
* s390-linux-nat.c (have_regset_vxrs): New static variable.
(s390_linux_fetch_inferior_registers): Handle vector registers, if
present.
(s390_linux_store_inferior_registers): Likewise.
(s390_get_hwcap): Remove function. Embed its logic...
(s390_read_description): ...here. Yield a target description with
vector registers if applicable.
* s390-linux-tdep.c: Include "features/s390-vx-linux64.c",
"features/s390-tevx-linux64.c", "features/s390x-vx-linux64.c", and
"features/s390x-tevx-linux64.c".
(struct gdbarch_tdep) <v0_full_regnum>: New field.
(s390_dwarf_regmap): Add vector registers. Remove bogus entries
for "GNU/Linux-specific registers".
(s390_dwarf_reg_r0l): New enum value.
(s390_dwarf_reg_to_regnum): Support vector registers.
(s390_adjust_frame_regnum): Adjust pseudo DWARF register numbers
of GPR lower halves.
(regnum_is_vxr_full): New function.
(s390_register_name): New function.
(s390_pseudo_register_name): Handle v0-v15, which are composed of
f0-f15 and v0l-v15l.
(s390_pseudo_register_type): Likewise.
(s390_pseudo_register_read): Likewise.
(s390_pseudo_register_write): Likewise.
(s390_value_from_register): Account for the fact that values are
placed left-justified in vector registers.
(s390_pseudo_register_reggroup_p): Add pseudo registers v0-v15 to
the vector reggroup and omit them from the general reggroup.
(s390_regmap_vxrs_low, s390_regmap_vxrs_high): New register maps.
(s390_vxrs_low_regset, s390_vxrs_high_regset): New regsets.
(s390_iterate_over_regset_sections): Add iterations for the two
new vector regsets.
(s390_core_read_description): Yield a target description with
vector registers if applicable.
(s390_gdbarch_init): Handle target descriptions with vector
registers. Add "register_name" gdbarch method.
(_initialize_s390_tdep): Call new tdesc initialization functions.
* s390-linux-tdep.h (HWCAP_S390_VX): New macro.
(S390_V0_LOWER_REGNUM, S390_V1_LOWER_REGNUM, S390_V2_LOWER_REGNUM)
(S390_V3_LOWER_REGNUM, S390_V4_LOWER_REGNUM, S390_V5_LOWER_REGNUM)
(S390_V6_LOWER_REGNUM, S390_V7_LOWER_REGNUM, S390_V8_LOWER_REGNUM)
(S390_V9_LOWER_REGNUM, S390_V10_LOWER_REGNUM)
(S390_V11_LOWER_REGNUM, S390_V12_LOWER_REGNUM)
(S390_V13_LOWER_REGNUM, S390_V14_LOWER_REGNUM)
(S390_V15_LOWER_REGNUM, S390_V16_REGNUM, S390_V17_REGNUM)
(S390_V18_REGNUM, S390_V19_REGNUM, S390_V20_REGNUM)
(S390_V21_REGNUM, S390_V22_REGNUM, S390_V23_REGNUM)
(S390_V24_REGNUM, S390_V25_REGNUM, S390_V26_REGNUM)
(S390_V27_REGNUM, S390_V28_REGNUM, S390_V29_REGNUM)
(S390_V30_REGNUM, S390_V31_REGNUM): New macros.
(S390_NUM_REGS): Adjust value.
(s390_vxrs_low_regset, s390_vxrs_high_regset): Declare.
(tdesc_s390_vx_linux64, tdesc_s390_tevx_linux64)
(tdesc_s390x_vx_linux64, tdesc_s390x_tevx_linux64): Likewise.
* NEWS: Announce S/390 vector register support.
2015-03-02 10:57:39 +01:00
|
|
|
initialize_tdesc_s390x_vx_linux64 ();
|
|
|
|
initialize_tdesc_s390x_tevx_linux64 ();
|
2017-09-25 16:02:23 +02:00
|
|
|
initialize_tdesc_s390x_gs_linux64 ();
|
2001-10-14 00:13:35 +02:00
|
|
|
}
|