binutils-gdb/gdb/top.c

2373 lines
67 KiB
C
Raw Normal View History

/* Top level stuff for GDB, the GNU debugger.
2002-01-05 06:54:31 +01:00
Copyright (C) 1986-2020 Free Software Foundation, Inc.
1999-07-07 22:19:36 +02:00
This file is part of GDB.
1999-07-07 22:19:36 +02:00
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or
1999-07-07 22:19:36 +02:00
(at your option) any later version.
1999-07-07 22:19:36 +02:00
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
1999-07-07 22:19:36 +02:00
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. */
#include "defs.h"
#include "gdbcmd.h"
#include "cli/cli-cmds.h"
#include "cli/cli-script.h"
#include "cli/cli-setshow.h"
#include "cli/cli-decode.h"
#include "symtab.h"
#include "inferior.h"
Add new infrun.h header. Move infrun.c declarations out of inferior.h to a new infrun.h file. Tested by building on: i686-w64-mingw32, enable-targets=all x86_64-linux, enable-targets=all i586-pc-msdosdjgpp And also grepped the whole tree for each symbol moved to find where infrun.h might be necessary. gdb/ 2014-05-22 Pedro Alves <palves@redhat.com> * inferior.h (debug_infrun, debug_displaced, stop_on_solib_events) (sync_execution, sched_multi, step_stop_if_no_debug, non_stop) (disable_randomization, enum exec_direction_kind) (execution_direction, stop_registers, start_remote) (clear_proceed_status, proceed, resume, user_visible_resume_ptid) (wait_for_inferior, normal_stop, get_last_target_status) (prepare_for_detach, fetch_inferior_event, init_wait_for_inferior) (insert_step_resume_breakpoint_at_sal) (follow_inferior_reset_breakpoints, stepping_past_instruction_at) (set_step_info, print_stop_event, signal_stop_state) (signal_print_state, signal_pass_state, signal_stop_update) (signal_print_update, signal_pass_update) (update_signals_program_target, clear_exit_convenience_vars) (displaced_step_dump_bytes, update_observer_mode) (signal_catch_update, gdb_signal_from_command): Move declarations ... * infrun.h: ... to this new file. * amd64-tdep.c: Include infrun.h. * annotate.c: Include infrun.h. * arch-utils.c: Include infrun.h. * arm-linux-tdep.c: Include infrun.h. * arm-tdep.c: Include infrun.h. * break-catch-sig.c: Include infrun.h. * breakpoint.c: Include infrun.h. * common/agent.c: Include infrun.h instead of inferior.h. * corelow.c: Include infrun.h. * event-top.c: Include infrun.h. * go32-nat.c: Include infrun.h. * i386-tdep.c: Include infrun.h. * inf-loop.c: Include infrun.h. * infcall.c: Include infrun.h. * infcmd.c: Include infrun.h. * infrun.c: Include infrun.h. * linux-fork.c: Include infrun.h. * linux-nat.c: Include infrun.h. * linux-thread-db.c: Include infrun.h. * monitor.c: Include infrun.h. * nto-tdep.c: Include infrun.h. * procfs.c: Include infrun.h. * record-btrace.c: Include infrun.h. * record-full.c: Include infrun.h. * remote-m32r-sdi.c: Include infrun.h. * remote-mips.c: Include infrun.h. * remote-notif.c: Include infrun.h. * remote-sim.c: Include infrun.h. * remote.c: Include infrun.h. * reverse.c: Include infrun.h. * rs6000-tdep.c: Include infrun.h. * s390-linux-tdep.c: Include infrun.h. * solib-irix.c: Include infrun.h. * solib-osf.c: Include infrun.h. * solib-svr4.c: Include infrun.h. * target.c: Include infrun.h. * top.c: Include infrun.h. * windows-nat.c: Include infrun.h. * mi/mi-interp.c: Include infrun.h. * mi/mi-main.c: Include infrun.h. * python/py-threadevent.c: Include infrun.h.
2014-05-22 13:29:11 +02:00
#include "infrun.h"
#include <signal.h>
#include "target.h"
#include "target-dcache.h"
#include "breakpoint.h"
#include "gdbtypes.h"
#include "expression.h"
#include "value.h"
#include "language.h"
#include "terminal.h"
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 04:29:24 +02:00
#include "gdbsupport/job-control.h"
#include "annotate.h"
#include "completer.h"
#include "top.h"
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 04:29:24 +02:00
#include "gdbsupport/version.h"
#include "serial.h"
#include "main.h"
#include "event-loop.h"
Add "executing" property to threads. * inferior.h (target_executing): Delete. * gdbthread.h (struct thread_info): Add executing_ field. (set_executing, is_executing): New. * thread.c (main_thread_executing): New. (init_thread_list): Clear it and also main_thread_running. (is_running): Return false if target has no execution. (any_running, is_executing, set_executing): New. * top.c: Include "gdbthread.h". (target_executing): Delete. (execute_command): Replace target_executing check by any_running. * event-top.c: Include "gdbthread.h". (display_gdb_prompt, command_handler): Replace target_executing by is_running. * inf-loop.c: Include "gdbthread.h". Don't mark as not executing here. Replace target_executing by is_running. * infrun.c (handle_inferior_event): Mark all threads as not-executing. * linux-nat.c (linux_nat_resume): Don't mark thread as executing here. * stack.c (get_selected_block): Return null if inferior is executing. * target.c (target_resume): Mark resumed ptid as executing. * breakpoint.c (until_break_command): Replace target_executing check by is_executing. * remote.c (remote_async_resume): Don't mark inferior as executing here. * mi/mi-interp.c (mi_cmd_interpreter_exec): Replace target_executing by any_running. * mi/mi-main.c (mi_cmd_exec_interrupt, mi_cmd_execute) (mi_execute_async_cli_command): Replace target_executing by is_running. * frame.c (get_current_frame): Error out if the current thread is executing. (has_stack_frames): New. (get_selected_frame, deprecated_safe_get_selected_frame): Check has_stack_frames. * Makefile.in (event-top.o, frame.o, inf-loop.o, top.o): Depend on $(gdbthread_h).
2008-07-10 00:16:15 +02:00
#include "gdbthread.h"
Extension Language API * configure.ac (libpython checking): Remove all but python.o from CONFIG_OBS. Remove all but python.c from CONFIG_SRCS. * configure: Regenerate. * Makefile.in (SFILES): Add extension.c. (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h (COMMON_OBS): Add extension.o. * extension.h: New file. * extension-priv.h: New file. * extension.c: New file. * python/python-internal.h: #include "extension.h". (gdbpy_auto_load_enabled): Declare. (gdbpy_apply_val_pretty_printer): Declare. (gdbpy_apply_frame_filter): Declare. (gdbpy_preserve_values): Declare. (gdbpy_breakpoint_cond_says_stop): Declare. (gdbpy_breakpoint_has_cond): Declare. (void source_python_script_for_objfile): Delete. * python/python.c: #include "extension-priv.h". Delete inclusion of "observer.h". (extension_language_python): Moved here and renamed from script_language_python in py-auto-load.c. Redefined to be of type extension_language_defn. (python_extension_script_ops): New global. (python_extension_ops): New global. (struct python_env): New member previous_active. (restore_python_env): Call restore_active_ext_lang. (ensure_python_env): Call set_active_ext_lang. (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static. New arg extlang. (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static. New arg extlang. (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static. New arg extlang. (gdbpy_eval_from_control_command): Renamed from eval_python_from_control_command, made static. New arg extlang. (gdbpy_source_script) Renamed from source_python_script, made static. New arg extlang. (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change result to int. New arg extlang. (gdbpy_source_objfile_script): Renamed from source_python_script_for_objfile, made static. New arg extlang. (gdbpy_start_type_printers): Renamed from start_type_printers, made static. New args extlang, extlang_printers. Change result type to "void". (gdbpy_apply_type_printers): Renamed from apply_type_printers, made static. New arg extlang. Rename arg printers to extlang_printers and change type to ext_lang_type_printers *. (gdbpy_free_type_printers): Renamed from free_type_printers, made static. Replace argument arg with extlang, extlang_printers. (!HAVE_PYTHON, eval_python_from_control_command): Delete. (!HAVE_PYTHON, source_python_script): Delete. (!HAVE_PYTHON, gdbpy_should_stop): Delete. (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete. (!HAVE_PYTHON, start_type_printers): Delete. (!HAVE_PYTHON, apply_type_printers): Delete. (!HAVE_PYTHON, free_type_printers): Delete. (_initialize_python): Delete call to observer_attach_before_prompt. (finalize_python): Set/restore active extension language. (gdbpy_finish_initialization) Renamed from finish_python_initialization, made static. New arg extlang. (gdbpy_initialized): New function. * python/python.h: #include "extension.h". Delete #include "value.h", "mi/mi-cmds.h". (extension_language_python): Declare. (GDBPY_AUTO_FILE_NAME): Delete. (enum py_bt_status): Moved to extension.h and renamed to ext_lang_bt_status. (enum frame_filter_flags): Moved to extension.h. (enum py_frame_args): Moved to extension.h and renamed to ext_lang_frame_args. (finish_python_initialization): Delete. (eval_python_from_control_command): Delete. (source_python_script): Delete. (apply_val_pretty_printer): Delete. (apply_frame_filter): Delete. (preserve_python_values): Delete. (gdbpy_script_language_defn): Delete. (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete. (start_type_printers, apply_type_printers, free_type_printers): Delete. * auto-load.c: #include "extension.h". (GDB_AUTO_FILE_NAME): Delete. (auto_load_gdb_scripts_enabled): Make public. New arg extlang. (script_language_gdb): Delete, moved to extension.c and renamed to extension_language_gdb. (source_gdb_script_for_objfile): Delete. (auto_load_pspace_info): New member unsupported_script_warning_printed. (loaded_script): Change type of language member to struct extension_language_defn *. (init_loaded_scripts_info): Initialize unsupported_script_warning_printed. (maybe_add_script): Make static. Change type of language arg to struct extension_language_defn *. (clear_section_scripts): Reset unsupported_script_warning_printed. (auto_load_objfile_script_1): Rewrite to use extension language API. (auto_load_objfile_script): Make public. Remove support-compiled-in and auto-load-enabled checks, moved to auto_load_scripts_for_objfile. (source_section_scripts): Rewrite to use extension language API. (load_auto_scripts_for_objfile): Rewrite to use auto_load_scripts_for_objfile. (collect_matching_scripts_data): Change type of language member to struct extension_language_defn *. (auto_load_info_scripts): Change type of language arg to struct extension_language_defn *. (unsupported_script_warning_print): New function. (script_not_found_warning_print): Make static. (_initialize_auto_load): Rewrite construction of scripts-directory help. * auto-load.h (struct objfile): Add forward decl. (struct script_language): Delete. (struct auto_load_pspace_info): Add forward decl. (struct extension_language_defn): Add forward decl. (maybe_add_script): Delete. (auto_load_objfile_script): Declare. (script_not_found_warning_print): Delete. (auto_load_info_scripts): Update prototype. (auto_load_gdb_scripts_enabled): Declare. * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from auto_load_python_scripts_enabled and made public. (script_language_python): Delete, moved to python.c. (gdbpy_script_language_defn): Delete. (info_auto_load_python_scripts): Update to use extension_language_python. * breakpoint.c (condition_command): Replace call to gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang. (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop with call to breakpoint_ext_lang_cond_says_stop. * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed from gdbpy_should_stop. Change result type to enum scr_bp_stop. New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL. (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond. New arg slang. (local_setattro): Print name of extension language with existing stop condition. * valprint.c (val_print, value_print): Update to call apply_ext_lang_val_pretty_printer. * cp-valprint.c (cp_print_value): Update call to apply_ext_lang_val_pretty_printer. * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON. (gdbpy_apply_val_pretty_printer): Renamed from apply_val_pretty_printer. New arg extlang. (!HAVE_PYTHON, apply_val_pretty_printer): Delete. * cli/cli-cmds.c (source_script_from_stream): Rewrite to use extension language API. * cli/cli-script.c (execute_control_command): Update to call eval_ext_lang_from_control_command. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use enum ext_lang_bt_status values. Update call to apply_ext_lang_frame_filter. (mi_cmd_stack_list_locals): Ditto. (mi_cmd_stack_list_args): Ditto. (mi_cmd_stack_list_variables): Ditto. * mi/mi-main.c: Delete #include "python/python-internal.h". Add #include "extension.h". (mi_cmd_list_features): Replace reference to python internal variable gdb_python_initialized with call to ext_lang_initialized_p. * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status. Update to use enum ext_lang_frame_args. Update to call apply_ext_lang_frame_filter. * python/py-framefilter.c (extract_sym): Update to use enum ext_lang_bt_status. (extract_value, py_print_type, py_print_value): Ditto. (py_print_single_arg, enumerate_args, enumerate_locals): Ditto. (py_mi_print_variables, py_print_locals, py_print_args): Ditto. (py_print_frame): Ditto. (gdbpy_apply_frame_filter): Renamed from apply_frame_filter. New arg extlang. Update to use enum ext_lang_bt_status. * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to finish_python_initialization. Replace with call to finish_ext_lang_initialization. * typeprint.c (do_free_global_table): Update to call free_ext_lang_type_printers. (create_global_typedef_table): Update to call start_ext_lang_type_printers. (find_global_typedef): Update to call apply_ext_lang_type_printers. * typeprint.h (struct ext_lang_type_printers): Add forward decl. (type_print_options): Change type of global_printers from "void *" to "struct ext_lang_type_printers *". * value.c (preserve_values): Update to call preserve_ext_lang_values. * python/py-value.c: Remove #ifdef HAVE_PYTHON. (gdbpy_preserve_values): Renamed from preserve_python_values. New arg extlang. (!HAVE_PYTHON, preserve_python_values): Delete. * utils.c (quit_flag): Delete, moved to extension.c. (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to extension.c. * eval.c: Delete #include "python/python.h". * main.c: Delete #include "python/python.h". * defs.h: Update comment. testsuite/ * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected output. * gdb.gdb/python-interrupts.exp: New file.
2014-02-06 04:27:58 +01:00
#include "extension.h"
#include "interps.h"
Convert observers to C++ This converts observers from using a special source-generating script to be plain C++. This version of the patch takes advantage of C++11 by using std::function and variadic templates; incorporates Pedro's patches; and renames the header file to "observable.h" (this change eliminates the need for a clean rebuild). Note that Pedro's patches used a template lambda in tui-hooks.c, but this failed to compile on some buildbot instances (presumably due to differing C++ versions); I replaced this with an ordinary template function. Regression tested on the buildbot. gdb/ChangeLog 2018-03-19 Pedro Alves <palves@redhat.com> Tom Tromey <tom@tromey.com> * unittests/observable-selftests.c: New file. * common/observable.h: New file. * observable.h: New file. * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c, arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c, breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c, corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c, extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c, infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c, linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c, mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c, ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c, python/py-breakpoint.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c, record-btrace.c, record-full.c, record.c, regcache.c, remote.c, riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c, spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c, symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c, tui/tui-interp.c, valops.c: Update all users. * tui/tui-hooks.c (tui_bp_created_observer) (tui_bp_deleted_observer, tui_bp_modified_observer) (tui_inferior_exit_observer, tui_before_prompt_observer) (tui_normal_stop_observer, tui_register_changed_observer): Remove. (tui_observers_token): New global. (attach_or_detach, tui_attach_detach_observers): New functions. (tui_install_hooks, tui_remove_hooks): Use tui_attach_detach_observers. * record-btrace.c (record_btrace_thread_observer): Remove. (record_btrace_thread_observer_token): New global. * observer.sh: Remove. * observer.c: Rename to observable.c. * observable.c (namespace gdb_observers): Define new objects. (observer_debug): Move into gdb_observers namespace. (struct observer, struct observer_list, xalloc_observer_list_node) (xfree_observer_list_node, generic_observer_attach) (generic_observer_detach, generic_observer_notify): Remove. (_initialize_observer): Update. Don't include observer.inc. * Makefile.in (generated_files): Remove observer.h, observer.inc. (clean mostlyclean): Likewise. (observer.h, observer.inc): Remove targets. (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c. (COMMON_SFILES): Use observable.c, not observer.c. * .gitignore: Remove observer.h. gdb/doc/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * observer.texi: Remove. gdb/testsuite/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * gdb.gdb/observer.exp: Remove.
2016-10-02 18:50:20 +02:00
#include "observable.h"
New commands "mt set per-command {space,time,symtab} {on,off}". * NEWS: Add entry. * event-top.c: #include "maint.h". * main.c: #include "maint.h". * maint.c: #include <sys/time.h>, <time.h>, block.h, top.h, timeval-utils.h, maint.h, cli/cli-setshow.h. (per_command_time, per_command_space): New static globals. (per_command_symtab): New static global. (per_command_setlist, per_command_showlist): New static globals. (struct cmd_stats): Move here from utils.c. (set_per_command_time): Renamed from set_display_time in utils.c and moved here. All callers updated. (set_per_command_space): Renamed from set_display_space in utils.c and moved here. All callers updated. (count_symtabs_and_blocks): New function. (report_command_stats): Moved here from utils.c. Add support for printing symtab stats. Only print data if enabled before command executed. (make_command_stats_cleanup): Ditto. (sert_per_command_cmd, show_per_command_cmd): New functions. (_initialize_maint_cmds): Add new commands mt set per-command {space,time,symtab} {on,off}. * maint.h: New file. * top.c: #include "maint.h". * utils.c (reset_prompt_for_continue_wait_time): New function. (get_prompt_for_continue_wait_time): New function. * utils.h (reset_prompt_for_continue_wait_time): Declare (get_prompt_for_continue_wait_time): Declare. (make_command_stats_cleanup): Moved to maint.h. (set_display_time, set_display_space): Moved to maint.h and renamed to set_per_command_time, set_per_command_space. * cli/cli-setshow.c (parse_cli_boolean_value): Renamed from parse_binary_operation and made non-static. Don't call error, just return an error marker. All callers updated. * cli/cli-setshow.h (parse_cli_boolean_value): Declare. doc/ * gdb.texinfo (Maintenance Commands): Add docs for "mt set per-command {space,time,symtab} {on,off}". testsuite/ * gdb.base/maint.exp: Update tests for per-command stats.
2013-03-21 18:37:30 +01:00
#include "maint.h"
#include "filenames.h"
#include "frame.h"
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 04:29:24 +02:00
#include "gdbsupport/buffer.h"
#include "gdb_select.h"
Rename common to gdbsupport This is the next patch in the ongoing series to move gdbsever to the top level. This patch just renames the "common" directory. The idea is to do this move in two parts: first rename the directory (this patch), then move the directory to the top. This approach makes the patches a bit more tractable. I chose the name "gdbsupport" for the directory. However, as this patch was largely written by sed, we could pick a new name without too much difficulty. Tested by the buildbot. gdb/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * contrib/ari/gdb_ari.sh: Change common to gdbsupport. * configure: Rebuild. * configure.ac: Change common to gdbsupport. * gdbsupport: Rename from common. * acinclude.m4: Change common to gdbsupport. * Makefile.in (CONFIG_SRC_SUBDIR, COMMON_SFILES) (HFILES_NO_SRCDIR, stamp-version, ALLDEPFILES): Change common to gdbsupport. * aarch64-tdep.c, ada-lang.c, ada-lang.h, agent.c, alloc.c, amd64-darwin-tdep.c, amd64-dicos-tdep.c, amd64-fbsd-nat.c, amd64-fbsd-tdep.c, amd64-linux-nat.c, amd64-linux-tdep.c, amd64-nbsd-tdep.c, amd64-obsd-tdep.c, amd64-sol2-tdep.c, amd64-tdep.c, amd64-windows-tdep.c, arch-utils.c, arch/aarch64-insn.c, arch/aarch64.c, arch/aarch64.h, arch/amd64.c, arch/amd64.h, arch/arm-get-next-pcs.c, arch/arm-linux.c, arch/arm.c, arch/i386.c, arch/i386.h, arch/ppc-linux-common.c, arch/riscv.c, arch/riscv.h, arch/tic6x.c, arm-tdep.c, auto-load.c, auxv.c, ax-gdb.c, ax-general.c, ax.h, breakpoint.c, breakpoint.h, btrace.c, btrace.h, build-id.c, build-id.h, c-lang.h, charset.c, charset.h, cli/cli-cmds.c, cli/cli-cmds.h, cli/cli-decode.c, cli/cli-dump.c, cli/cli-option.h, cli/cli-script.c, coff-pe-read.c, command.h, compile/compile-c-support.c, compile/compile-c.h, compile/compile-cplus-symbols.c, compile/compile-cplus-types.c, compile/compile-cplus.h, compile/compile-loc2c.c, compile/compile.c, completer.c, completer.h, contrib/ari/gdb_ari.sh, corefile.c, corelow.c, cp-support.c, cp-support.h, cp-valprint.c, csky-tdep.c, ctf.c, darwin-nat.c, debug.c, defs.h, disasm-selftests.c, disasm.c, disasm.h, dtrace-probe.c, dwarf-index-cache.c, dwarf-index-cache.h, dwarf-index-write.c, dwarf2-frame.c, dwarf2expr.c, dwarf2loc.c, dwarf2read.c, event-loop.c, event-top.c, exceptions.c, exec.c, extension.h, fbsd-nat.c, features/aarch64-core.c, features/aarch64-fpu.c, features/aarch64-pauth.c, features/aarch64-sve.c, features/i386/32bit-avx.c, features/i386/32bit-avx512.c, features/i386/32bit-core.c, features/i386/32bit-linux.c, features/i386/32bit-mpx.c, features/i386/32bit-pkeys.c, features/i386/32bit-segments.c, features/i386/32bit-sse.c, features/i386/64bit-avx.c, features/i386/64bit-avx512.c, features/i386/64bit-core.c, features/i386/64bit-linux.c, features/i386/64bit-mpx.c, features/i386/64bit-pkeys.c, features/i386/64bit-segments.c, features/i386/64bit-sse.c, features/i386/x32-core.c, features/riscv/32bit-cpu.c, features/riscv/32bit-csr.c, features/riscv/32bit-fpu.c, features/riscv/64bit-cpu.c, features/riscv/64bit-csr.c, features/riscv/64bit-fpu.c, features/tic6x-c6xp.c, features/tic6x-core.c, features/tic6x-gp.c, filename-seen-cache.h, findcmd.c, findvar.c, fork-child.c, gcore.c, gdb_bfd.c, gdb_bfd.h, gdb_proc_service.h, gdb_regex.c, gdb_select.h, gdb_usleep.c, gdbarch-selftests.c, gdbthread.h, gdbtypes.h, gnu-nat.c, go32-nat.c, guile/guile.c, guile/scm-ports.c, guile/scm-safe-call.c, guile/scm-type.c, i386-fbsd-nat.c, i386-fbsd-tdep.c, i386-go32-tdep.c, i386-linux-nat.c, i386-linux-tdep.c, i386-tdep.c, i387-tdep.c, ia64-libunwind-tdep.c, ia64-linux-nat.c, inf-child.c, inf-ptrace.c, infcall.c, infcall.h, infcmd.c, inferior-iter.h, inferior.c, inferior.h, inflow.c, inflow.h, infrun.c, infrun.h, inline-frame.c, language.h, linespec.c, linux-fork.c, linux-nat.c, linux-tdep.c, linux-thread-db.c, location.c, machoread.c, macrotab.h, main.c, maint.c, maint.h, memattr.c, memrange.h, mi/mi-cmd-break.h, mi/mi-cmd-env.c, mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-interp.c, mi/mi-main.c, mi/mi-parse.h, minsyms.c, mips-linux-tdep.c, namespace.h, nat/aarch64-linux-hw-point.c, nat/aarch64-linux-hw-point.h, nat/aarch64-linux.c, nat/aarch64-sve-linux-ptrace.c, nat/amd64-linux-siginfo.c, nat/fork-inferior.c, nat/linux-btrace.c, nat/linux-btrace.h, nat/linux-namespaces.c, nat/linux-nat.h, nat/linux-osdata.c, nat/linux-personality.c, nat/linux-procfs.c, nat/linux-ptrace.c, nat/linux-ptrace.h, nat/linux-waitpid.c, nat/mips-linux-watch.c, nat/mips-linux-watch.h, nat/ppc-linux.c, nat/x86-dregs.c, nat/x86-dregs.h, nat/x86-linux-dregs.c, nat/x86-linux.c, nto-procfs.c, nto-tdep.c, objfile-flags.h, objfiles.c, objfiles.h, obsd-nat.c, observable.h, osdata.c, p-valprint.c, parse.c, parser-defs.h, ppc-linux-nat.c, printcmd.c, probe.c, proc-api.c, procfs.c, producer.c, progspace.h, psymtab.h, python/py-framefilter.c, python/py-inferior.c, python/py-ref.h, python/py-type.c, python/python.c, record-btrace.c, record-full.c, record.c, record.h, regcache-dump.c, regcache.c, regcache.h, remote-fileio.c, remote-fileio.h, remote-sim.c, remote.c, riscv-tdep.c, rs6000-aix-tdep.c, rust-exp.y, s12z-tdep.c, selftest-arch.c, ser-base.c, ser-event.c, ser-pipe.c, ser-tcp.c, ser-unix.c, skip.c, solib-aix.c, solib-target.c, solib.c, source-cache.c, source.c, source.h, sparc-nat.c, spu-linux-nat.c, stack.c, stap-probe.c, symfile-add-flags.h, symfile.c, symfile.h, symtab.c, symtab.h, target-descriptions.c, target-descriptions.h, target-memory.c, target.c, target.h, target/waitstatus.c, target/waitstatus.h, thread-iter.h, thread.c, tilegx-tdep.c, top.c, top.h, tracefile-tfile.c, tracefile.c, tracepoint.c, tracepoint.h, tui/tui-io.c, ui-file.c, ui-out.h, unittests/array-view-selftests.c, unittests/child-path-selftests.c, unittests/cli-utils-selftests.c, unittests/common-utils-selftests.c, unittests/copy_bitwise-selftests.c, unittests/environ-selftests.c, unittests/format_pieces-selftests.c, unittests/function-view-selftests.c, unittests/lookup_name_info-selftests.c, unittests/memory-map-selftests.c, unittests/memrange-selftests.c, unittests/mkdir-recursive-selftests.c, unittests/observable-selftests.c, unittests/offset-type-selftests.c, unittests/optional-selftests.c, unittests/parse-connection-spec-selftests.c, unittests/ptid-selftests.c, unittests/rsp-low-selftests.c, unittests/scoped_fd-selftests.c, unittests/scoped_mmap-selftests.c, unittests/scoped_restore-selftests.c, unittests/string_view-selftests.c, unittests/style-selftests.c, unittests/tracepoint-selftests.c, unittests/unpack-selftests.c, unittests/utils-selftests.c, unittests/xml-utils-selftests.c, utils.c, utils.h, valarith.c, valops.c, valprint.c, value.c, value.h, varobj.c, varobj.h, windows-nat.c, x86-linux-nat.c, xml-support.c, xml-support.h, xml-tdesc.h, xstormy16-tdep.c, xtensa-linux-nat.c, dwarf2read.h: Change common to gdbsupport. gdb/gdbserver/ChangeLog 2019-07-09 Tom Tromey <tom@tromey.com> * configure: Rebuild. * configure.ac: Change common to gdbsupport. * acinclude.m4: Change common to gdbsupport. * Makefile.in (SFILES, OBS, GDBREPLAY_OBS, IPA_OBJS) (version-generated.c, gdbsupport/%-ipa.o, gdbsupport/%.o): Change common to gdbsupport. * ax.c, event-loop.c, fork-child.c, gdb_proc_service.h, gdbreplay.c, gdbthread.h, hostio-errno.c, hostio.c, i387-fp.c, inferiors.c, inferiors.h, linux-aarch64-tdesc-selftest.c, linux-amd64-ipa.c, linux-i386-ipa.c, linux-low.c, linux-tic6x-low.c, linux-x86-low.c, linux-x86-tdesc-selftest.c, linux-x86-tdesc.c, lynx-i386-low.c, lynx-low.c, mem-break.h, nto-x86-low.c, regcache.c, regcache.h, remote-utils.c, server.c, server.h, spu-low.c, symbol.c, target.h, tdesc.c, tdesc.h, thread-db.c, tracepoint.c, win32-i386-low.c, win32-low.c: Change common to gdbsupport.
2019-05-06 04:29:24 +02:00
#include "gdbsupport/scope-exit.h"
Don't include gdbarch.h from defs.h I touched symtab.h and was surprised to see how many files were rebuilt. I looked into it a bit, and found that defs.h includes gdbarch.h, which in turn includes many things. gdbarch.h is only needed by a minority ofthe files in gdb, so this patch removes the include from defs.h and updates the fallout. I did "wc -l" on the files in build/gdb/.deps; this patch reduces the line count from 139935 to 137030; so there are definitely future build-time savings here. Note that while I configured with --enable-targets=all, it's possible that some *-nat.c file needs an update. I could not test all of these. The buildbot caught a few problems along these lines. gdb/ChangeLog 2019-07-10 Tom Tromey <tom@tromey.com> * defs.h: Don't include gdbarch.h. * aarch64-ravenscar-thread.c, aarch64-tdep.c, alpha-bsd-tdep.h, alpha-linux-tdep.c, alpha-mdebug-tdep.c, arch-utils.h, arm-tdep.h, ax-general.c, btrace.c, buildsym-legacy.c, buildsym.h, c-lang.c, cli/cli-decode.h, cli/cli-dump.c, cli/cli-script.h, cli/cli-style.h, coff-pe-read.h, compile/compile-c-support.c, compile/compile-cplus.h, compile/compile-loc2c.c, corefile.c, cp-valprint.c, cris-linux-tdep.c, ctf.c, d-lang.c, d-namespace.c, dcache.c, dicos-tdep.c, dictionary.c, disasm-selftests.c, dummy-frame.c, dummy-frame.h, dwarf2-frame-tailcall.c, dwarf2expr.c, expression.h, f-lang.c, frame-base.c, frame-unwind.c, frv-linux-tdep.c, gdbarch-selftests.c, gdbtypes.h, go-lang.c, hppa-nbsd-tdep.c, hppa-obsd-tdep.c, i386-dicos-tdep.c, i386-tdep.h, ia64-vms-tdep.c, interps.h, language.c, linux-record.c, location.h, m2-lang.c, m32r-linux-tdep.c, mem-break.c, memattr.c, mn10300-linux-tdep.c, nios2-linux-tdep.c, objfiles.h, opencl-lang.c, or1k-linux-tdep.c, p-lang.c, parser-defs.h, ppc-tdep.h, probe.h, python/py-record-btrace.c, record-btrace.c, record.h, regcache-dump.c, regcache.h, riscv-fbsd-tdep.c, riscv-linux-tdep.c, rust-exp.y, sh-linux-tdep.c, sh-nbsd-tdep.c, source-cache.c, sparc-nbsd-tdep.c, sparc-obsd-tdep.c, sparc-ravenscar-thread.c, sparc64-fbsd-tdep.c, std-regs.c, target-descriptions.h, target-float.c, tic6x-linux-tdep.c, tilegx-linux-tdep.c, top.c, tracefile.c, trad-frame.c, type-stack.h, ui-style.c, utils.c, utils.h, valarith.c, valprint.c, varobj.c, x86-tdep.c, xml-support.h, xtensa-linux-tdep.c, cli/cli-cmds.h: Update. * s390-linux-nat.c, procfs.c, inf-ptrace.c: Likewise.
2019-06-09 23:21:02 +02:00
#include "gdbarch.h"
Guard against 'current_directory == NULL' on gdb_abspath (PR gdb/23613) Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1728147 Ref.: https://sourceware.org/bugzilla/show_bug.cgi?id=23613 Hi, This bug has been reported against Fedora GDB, but there's also an upstream bug. The problem reported is that GDB segfaults when the working directory is deleted. It's pretty use to reproduce it: mkdir bla cd bla rmdir ../bla gdb echo Debugging the problem is a bit tricky, because, since the current directory doesn't exist anymore, a corefile cannot be saved there. After a few attempts, I came up with the following: gdb -ex 'shell mkdir bla' -ex 'cd bla' -ex 'shell rmdir ../bla' -ex 'r echo' ./gdb/gdb This assumes that you're inside a build directory which contains ./gdb/gdb, of course. After investigating it, I found that the problem happens at gdb_abspath, where we're dereferencing 'current_directory' without checking if it's NULL: ... (concat (current_directory, IS_DIR_SEPARATOR (current_directory[strlen (current_directory) - 1]) ? "" : SLASH_STRING, ... So I fixed the problem with the patch below. The idea is that, if 'current_directory' is NULL, then the final string returned should be just the "path". After fixing the bug, I found a similar one reported against our bugzilla: PR gdb/23613. The problem is the same, but the reproducer is a bit different. I really tried writing a testcase for this, but unfortunately it's apparently not possible to start GDB inside a non-existent directory with DejaGNU. I regression tested this patch on the BuildBot, and no regressions were found. gdb/ChangeLog: 2019-12-14 Sergio Durigan Junior <sergiodj@redhat.com> https://bugzilla.redhat.com/show_bug.cgi?id=1728147 PR gdb/23613 * bsd-kvm.c (bsd_kvm_target_open): Use 'gdb_abspath'. * corelow.c: Include 'gdbsupport/pathstuff.h'. (core_target_open): Use 'gdb_abspath'. * gdbsupport/pathstuff.c (gdb_abspath): Guard against 'current_directory == NULL' case. * gdbsupport/pathstuff.h (gdb_abspath): Expand comment and explain what happens when 'current_directory' is NULL. * go32-nat.c (go32_nat_target::wait): Check if 'current_directory' is NULL before call to 'chdir'. * source.c (add_path): Use 'gdb_abspath'. * top.c: Include 'gdbsupport/pathstuff.h'. (init_history): Use 'gdb_abspath'. (set_history_filename): Likewise. * tracefile-tfile.c: Include 'gdbsupport/pathstuff.h'. (tfile_target_open): Use 'gdb_abspath'. Change-Id: Ibb0932fa25bc5c2d3ae4a7f64bd7f32885ca403b
2019-07-10 22:18:27 +02:00
#include "gdbsupport/pathstuff.h"
#include "cli/cli-style.h"
/* readline include files. */
#include "readline/readline.h"
#include "readline/history.h"
/* readline defines this. */
#undef savestring
#include <sys/types.h>
1999-09-22 05:28:34 +02:00
#include "event-top.h"
remove gdb_stat.h This patch is purely mechanical. It removes gdb_stat.h and changes the code to use sys/stat.h. 2013-11-18 Tom Tromey <tromey@redhat.com> * common/gdb_stat.h: Remove. * ada-lang.c: Use sys/stat.h, not gdb_stat.h. * common/filestuff.c: Use sys/stat.h, not gdb_stat.h. * common/linux-osdata.c: Use sys/stat.h, not gdb_stat.h. * corefile.c: Use sys/stat.h, not gdb_stat.h. * ctf.c: Use sys/stat.h, not gdb_stat.h. * darwin-nat.c: Use sys/stat.h, not gdb_stat.h. * dbxread.c: Use sys/stat.h, not gdb_stat.h. * dwarf2read.c: Use sys/stat.h, not gdb_stat.h. * exec.c: Use sys/stat.h, not gdb_stat.h. * gdbserver/linux-low.c: Use sys/stat.h, not gdb_stat.h. * gdbserver/remote-utils.c: Use sys/stat.h, not gdb_stat.h. * inf-child.c: Use sys/stat.h, not gdb_stat.h. * jit.c: Use sys/stat.h, not gdb_stat.h. * linux-nat.c: Use sys/stat.h, not gdb_stat.h. * m68klinux-nat.c: Use sys/stat.h, not gdb_stat.h. * main.c: Use sys/stat.h, not gdb_stat.h. * mdebugread.c: Use sys/stat.h, not gdb_stat.h. * mi/mi-cmd-env.c: Use sys/stat.h, not gdb_stat.h. * nto-tdep.c: Use sys/stat.h, not gdb_stat.h. * objfiles.c: Use sys/stat.h, not gdb_stat.h. * procfs.c: Use sys/stat.h, not gdb_stat.h. * remote-fileio.c: Use sys/stat.h, not gdb_stat.h. * remote-mips.c: Use sys/stat.h, not gdb_stat.h. * remote.c: Use sys/stat.h, not gdb_stat.h. * rs6000-nat.c: Use sys/stat.h, not gdb_stat.h. * sol-thread.c: Use sys/stat.h, not gdb_stat.h. * solib-spu.c: Use sys/stat.h, not gdb_stat.h. * source.c: Use sys/stat.h, not gdb_stat.h. * symfile.c: Use sys/stat.h, not gdb_stat.h. * symmisc.c: Use sys/stat.h, not gdb_stat.h. * symtab.c: Use sys/stat.h, not gdb_stat.h. * top.c: Use sys/stat.h, not gdb_stat.h. * xcoffread.c: Use sys/stat.h, not gdb_stat.h.
2013-11-06 15:55:51 +01:00
#include <sys/stat.h>
#include <ctype.h>
2000-02-03 05:14:45 +01:00
#include "ui-out.h"
#include "cli-out.h"
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
#include "tracepoint.h"
Remove the target from the event loop while in secondary prompts If a pagination prompt triggers while the target is running, and the target exits before the user responded to the pagination query, this happens: Starting program: foo ---Type <return> to continue, or q <return> to quit---No unwaited-for children left. Couldn't get registers: No such process. Couldn't get registers: No such process. Couldn't get registers: No such process. (gdb) Couldn't get registers: No such process. (gdb) To reiterate, the user hasn't replied to the pagination prompt above. A pagination query nests an event loop (in gdb_readline_wrapper). In async mode, in addition to stdin and signal handlers, we'll have the target also installed in the event loop still. So if the target reports an event, that wakes up the nested event loop, which calls into fetch_inferior_event etc. to handle the event which generates further output, all while we should be waiting for pagination confirmation... (TBC, any target event that generates output ends up spuriously waking up the pagination, though exits seem to be the worse kind.) I've played with a couple different approaches to fixing this, while at the same time trying to avoid being invasive. Both revolve around not listening to target events while in a pagination prompt (doing anything else I think would be a much bigger change). The approach taken just removes the target from the event loop while within gdb_readline_wrapper. The other approach used gdb_select directly, with only input_fd installed, but that had the issue that it didn't handle the async signal handlers, and turned out to be a bit more code than the first version. gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c: Include "inf-loop.h". (struct gdb_readline_wrapper_cleanup) <target_is_async_orig>: New field. (gdb_readline_wrapper_cleanup): Make the target async again, if it was async before. (gdb_readline_wrapper): Store whether the target is async, and make it sync. gdb/testsuite/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * gdb.base/paginate-inferior-exit.c: New file. * gdb.base/paginate-inferior-exit.exp: New file.
2014-07-14 20:55:32 +02:00
#include "inf-loop.h"
#if defined(TUI)
# include "tui/tui.h"
#endif
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
#ifndef O_NOCTTY
# define O_NOCTTY 0
#endif
extern void initialize_all_files (void);
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
static bool history_filename_empty (void);
#define PROMPT(X) the_prompts.prompt_stack[the_prompts.top + X].prompt
#define PREFIX(X) the_prompts.prompt_stack[the_prompts.top + X].prefix
#define SUFFIX(X) the_prompts.prompt_stack[the_prompts.top + X].suffix
/* Default command line prompt. This is overridden in some configs. */
1999-08-31 03:14:27 +02:00
#ifndef DEFAULT_PROMPT
#define DEFAULT_PROMPT "(gdb) "
#endif
struct ui_file **
current_ui_gdb_stdout_ptr ()
{
return &current_ui->m_gdb_stdout;
}
struct ui_file **
current_ui_gdb_stdin_ptr ()
{
return &current_ui->m_gdb_stdin;
}
struct ui_file **
current_ui_gdb_stderr_ptr ()
{
return &current_ui->m_gdb_stderr;
}
struct ui_file **
current_ui_gdb_stdlog_ptr ()
{
return &current_ui->m_gdb_stdlog;
}
struct ui_out **
current_ui_current_uiout_ptr ()
{
return &current_ui->m_current_uiout;
}
int inhibit_gdbinit = 0;
/* Flag for whether we want to confirm potentially dangerous
operations. Default is yes. */
Change boolean options to bool instead of int This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise.
2019-09-14 21:36:58 +02:00
bool confirm = true;
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
static void
show_confirm (struct ui_file *file, int from_tty,
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
struct cmd_list_element *c, const char *value)
{
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
fprintf_filtered (file, _("Whether to confirm potentially "
"dangerous operations is %s.\n"),
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
value);
}
/* Current working directory. */
char *current_directory;
/* The last command line executed on the console. Used for command
Add previous_saved_command_line to allow a command to repeat a previous command. Currently, a previous command can be repeated when the user types an empty line. This is implemented in handle_line_of_input by returning saved_command_line in case an empty line has been input. If we want a command to repeat the previous command, we need to save the previous saved_command_line, as when a command runs, the saved_command_line already contains the current command line of the command being executed. As suggested by Tom, the previous_saved_command_line is made static. At the same time, saved_command_line is also made static. The support functions/variables for the repeat command logic are now all located inside top.c. gdb/ChangeLog 2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.h (saved_command_line): Remove declaration. * top.c (previous_saved_command_line, previous_repeat_arguments): New variables. (saved_command_line): Make static, define together with other 'repeat variables'. (dont_repeat): Clear repeat_arguments. (repeat_previous, get_saved_command_line, save_command_line): New functions. (gdb_init): Initialize saved_command_line and previous_saved_command_line. * main.c (captured_main_1): Remove saved_command_line initialization. * event-top.c (handle_line_of_input): Update to use the new 'repeat' related functions instead of direct access to saved_command_line. * command.h (repeat_previous, get_saved_command_line, save_command_line): New declarations. (dont_repeat): Add comment.
2019-04-20 14:02:29 +02:00
repetitions when the user enters an empty line. */
static char *saved_command_line;
/* If not NULL, the arguments that should be passed if
saved_command_line is repeated. */
static const char *repeat_arguments;
/* The previous last command line executed on the console. Used for command
repetitions when a command wants to relaunch the previously launched
command. We need this as when a command is running, saved_command_line
already contains the line of the currently executing command. */
char *previous_saved_command_line;
/* If not NULL, the arguments that should be passed if the
previous_saved_command_line is repeated. */
static const char *previous_repeat_arguments;
/* Nonzero if the current command is modified by "server ". This
1999-12-07 04:56:43 +01:00
affects things like recording into the command history, commands
repeating on RETURN, etc. This is so a user interface (emacs, GUI,
whatever) can issue its own commands and also send along commands
from the user, and have the user not notice that the user interface
is issuing commands too. */
int server_command;
/* Timeout limit for response from target. */
/* The default value has been changed many times over the years. It
was originally 5 seconds. But that was thought to be a long time
to sit and wait, so it was changed to 2 seconds. That was thought
to be plenty unless the connection was going through some terminal
server or multiplexer or other form of hairy serial connection.
In mid-1996, remote_timeout was moved from remote.c to top.c and
it began being used in other remote-* targets. It appears that the
default was changed to 20 seconds at that time, perhaps because the
Renesas E7000 ICE didn't always respond in a timely manner.
But if 5 seconds is a long time to sit and wait for retransmissions,
20 seconds is far worse. This demonstrates the difficulty of using
a single variable for all protocol timeouts.
As remote.c is used much more than remote-e7000.c, it was changed
back to 2 seconds in 1999. */
int remote_timeout = 2;
/* Non-zero tells remote* modules to output debugging info. */
int remote_debug = 0;
/* Sbrk location on entry to main. Used for statistics only. */
#ifdef HAVE_USEFUL_SBRK
char *lim_at_start;
#endif
/* Hooks for alternate command interfaces. */
/* This hook is called from within gdb's many mini-event loops which
could steal control from a real user interface's event loop. It
returns non-zero if the user is requesting a detach, zero
otherwise. */
1999-04-26 20:34:20 +02:00
int (*deprecated_ui_loop_hook) (int);
/* Called from print_frame_info to list the line we stopped in. */
void (*deprecated_print_frame_info_listing_hook) (struct symtab * s,
int line,
int stopline,
int noerror);
/* Replaces most of query. */
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-22 01:52:21 +02:00
int (*deprecated_query_hook) (const char *, va_list);
/* Replaces most of warning. */
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-22 01:52:21 +02:00
void (*deprecated_warning_hook) (const char *, va_list);
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-22 01:52:21 +02:00
/* These three functions support getting lines of text from the user.
They are used in sequence. First deprecated_readline_begin_hook is
called with a text string that might be (for example) a message for
the user to type in a sequence of commands to be executed at a
breakpoint. If this function calls back to a GUI, it might take
this opportunity to pop up a text interaction window with this
message. Next, deprecated_readline_hook is called with a prompt
that is emitted prior to collecting the user input. It can be
called multiple times. Finally, deprecated_readline_end_hook is
called to notify the GUI that we are done with the interaction
window and it can close it. */
-Wwrite-strings: The Rest This is the remainder boring constification that all looks more of less borderline obvious IMO. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * ada-exp.y (yyerror): Constify. * ada-lang.c (bound_name, get_selections) (ada_variant_discrim_type) (ada_variant_discrim_name, ada_value_struct_elt) (ada_lookup_struct_elt_type, is_unchecked_variant) (ada_which_variant_applies, standard_exc, ada_get_next_arg) (catch_ada_exception_command_split) (catch_ada_assert_command_split, catch_assert_command) (ada_op_name): Constify. * ada-lang.h (ada_yyerror, get_selections) (ada_variant_discrim_name, ada_value_struct_elt): Constify. * arc-tdep.c (arc_print_frame_cache): Constify. * arm-tdep.c (arm_skip_stub): Constify. * ax-gdb.c (gen_binop, gen_struct_ref_recursive, gen_struct_ref) (gen_aggregate_elt_ref): Constify. * bcache.c (print_bcache_statistics): Constify. * bcache.h (print_bcache_statistics): Constify. * break-catch-throw.c (catch_exception_command_1): * breakpoint.c (struct ep_type_description::description): Constify. (add_solib_catchpoint): Constify. (catch_fork_command_1): Add cast. (add_catch_command): Constify. * breakpoint.h (add_catch_command, add_solib_catchpoint): Constify. * bsd-uthread.c (bsd_uthread_state): Constify. * buildsym.c (patch_subfile_names): Constify. * buildsym.h (next_symbol_text_func, patch_subfile_names): Constify. * c-exp.y (yyerror): Constify. (token::oper): Constify. * c-lang.h (c_yyerror, cp_print_class_member): Constify. * c-varobj.c (cplus_describe_child): Constify. * charset.c (find_charset_names): Add cast. (find_charset_names): Constify array and add const_cast. * cli/cli-cmds.c (complete_command, cd_command): Constify. (edit_command): Constify. * cli/cli-decode.c (lookup_cmd): Constify. * cli/cli-dump.c (dump_memory_command, dump_value_command): Constify. (struct dump_context): Constify. (add_dump_command, restore_command): Constify. * cli/cli-script.c (get_command_line): Constify. * cli/cli-script.h (get_command_line): Constify. * cli/cli-utils.c (check_for_argument): Constify. * cli/cli-utils.h (check_for_argument): Constify. * coff-pe-read.c (struct read_pe_section_data): Constify. * command.h (lookup_cmd): Constify. * common/print-utils.c (decimal2str): Constify. * completer.c (gdb_print_filename): Constify. * corefile.c (set_gnutarget): Constify. * cp-name-parser.y (yyerror): Constify. * cp-valprint.c (cp_print_class_member): Constify. * cris-tdep.c (cris_register_name, crisv32_register_name): Constify. * d-exp.y (yyerror): Constify. (struct token::oper): Constify. * d-lang.h (d_yyerror): Constify. * dbxread.c (struct header_file_location::name): Constify. (add_old_header_file, add_new_header_file, last_function_name) (dbx_next_symbol_text, add_bincl_to_list) (find_corresponding_bincl_psymtab, set_namestring) (find_stab_function_addr, read_dbx_symtab, start_psymtab) (dbx_end_psymtab, read_ofile_symtab, process_one_symbol): * defs.h (command_line_input, print_address_symbolic) (deprecated_readline_begin_hook): Constify. * dwarf2read.c (anonymous_struct_prefix, dwarf_bool_name): Constify. * event-top.c (handle_line_of_input): Constify and add cast. * exceptions.c (catch_errors): Constify. * exceptions.h (catch_errors): Constify. * expprint.c (print_subexp_standard, op_string, op_name) (op_name_standard, dump_raw_expression, dump_raw_expression): * expression.h (op_name, op_string, dump_raw_expression): Constify. * f-exp.y (yyerror): Constify. (struct token::oper): Constify. (struct f77_boolean_val::name): Constify. * f-lang.c (f_word_break_characters): Constify. * f-lang.h (f_yyerror): Constify. * fork-child.c (fork_inferior): Add cast. * frv-tdep.c (struct gdbarch_tdep::register_names): Constify. (new_variant): Constify. * gdbarch.sh (pstring_ptr, pstring_list): Constify. * gdbarch.c: Regenerate. * gdbcore.h (set_gnutarget): Constify. * go-exp.y (yyerror): Constify. (token::oper): Constify. * go-lang.h (go_yyerror): Constify. * go32-nat.c (go32_sysinfo): Constify. * guile/scm-breakpoint.c (gdbscm_breakpoint_expression): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * guile/scm-param.c (pascm_param_value): Constify. * h8300-tdep.c (h8300_register_name, h8300s_register_name) (h8300sx_register_name): Constify. * hppa-tdep.c (hppa32_register_name, hppa64_register_name): Constify. * ia64-tdep.c (ia64_register_names): Constify. * infcmd.c (construct_inferior_arguments): Constify. (path_command, attach_post_wait): Constify. * language.c (show_range_command, show_case_command) (unk_lang_error): Constify. * language.h (language_defn::la_error) (language_defn::la_name_of_this): Constify. * linespec.c (decode_line_2): Constify. * linux-thread-db.c (thread_db_err_str): Constify. * lm32-tdep.c (lm32_register_name): Constify. * m2-exp.y (yyerror): Constify. * m2-lang.h (m2_yyerror): Constify. * m32r-tdep.c (m32r_register_names): Constify and make static. * m68hc11-tdep.c (m68hc11_register_names): Constify. * m88k-tdep.c (m88k_register_name): Constify. * macroexp.c (appendmem): Constify. * mdebugread.c (fdr_name, add_data_symbol, parse_type) (upgrade_type, parse_external, parse_partial_symbols) (mdebug_next_symbol_text, cross_ref, mylookup_symbol, new_psymtab) (new_symbol): Constify. * memattr.c (mem_info_command): Constify. * mep-tdep.c (register_name_from_keyword): Constify. * mi/mi-cmd-env.c (mi_cmd_env_path, _initialize_mi_cmd_env): Constify. * mi/mi-cmd-stack.c (list_args_or_locals): Constify. * mi/mi-cmd-var.c (mi_cmd_var_show_attributes): Constify. * mi/mi-main.c (captured_mi_execute_command): Constify and add cast. (mi_execute_async_cli_command): Constify. * mips-tdep.c (mips_register_name): Constify. * mn10300-tdep.c (register_name, mn10300_generic_register_name) (am33_register_name, am33_2_register_name) * moxie-tdep.c (moxie_register_names): Constify. * nat/linux-osdata.c (osdata_type): Constify fields. * nto-tdep.c (nto_parse_redirection): Constify. * objc-lang.c (lookup_struct_typedef, lookup_objc_class) (lookup_child_selector): Constify. (objc_methcall::name): Constify. * objc-lang.h (lookup_objc_class, lookup_child_selector) (lookup_struct_typedef): Constify. * objfiles.c (pc_in_section): Constify. * objfiles.h (pc_in_section): Constify. * p-exp.y (struct token::oper): Constify. (yyerror): Constify. * p-lang.h (pascal_yyerror): Constify. * parser-defs.h (op_name_standard): Constify. (op_print::string): Constify. (exp_descriptor::op_name): Constify. * printcmd.c (print_address_symbolic): Constify. * psymtab.c (print_partial_symbols): Constify. * python/py-breakpoint.c (stop_func): Constify. (bppy_get_expression): Constify. * python/py-cmd.c (cmdpy_completer::name): Constify. (cmdpy_function): Constify. * python/py-event.c (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-event.h (evpy_add_attribute) (gdbpy_initialize_event_generic): Constify. * python/py-evts.c (add_new_registry): Constify. * python/py-finishbreakpoint.c (outofscope_func): Constify. * python/py-framefilter.c (get_py_iter_from_func): Constify. * python/py-inferior.c (get_buffer): Add cast. * python/py-param.c (parm_constant::name): Constify. * python/py-unwind.c (fprint_frame_id): Constify. * python/python.c (gdbpy_parameter_value): Constify. * remote-fileio.c (remote_fio_func_map): Make 'name' const. * remote.c (memory_packet_config::name): Constify. (show_packet_config_cmd, remote_write_bytes) (remote_buffer_add_string): * reverse.c (exec_reverse_once): Constify. * rs6000-tdep.c (variant::name, variant::description): Constify. * rust-exp.y (rustyyerror): Constify. * rust-lang.c (rust_op_name): Constify. * rust-lang.h (rustyyerror): Constify. * serial.h (serial_ops::name): Constify. * sh-tdep.c (sh_sh_register_name, sh_sh3_register_name) (sh_sh3e_register_name, sh_sh2e_register_name) (sh_sh2a_register_name, sh_sh2a_nofpu_register_name) (sh_sh_dsp_register_name, sh_sh3_dsp_register_name) (sh_sh4_register_name, sh_sh4_nofpu_register_name) (sh_sh4al_dsp_register_name): Constify. * sh64-tdep.c (sh64_register_name): Constify. * solib-darwin.c (lookup_symbol_from_bfd): Constify. * spu-tdep.c (spu_register_name, info_spu_dma_cmdlist): Constify. * stabsread.c (patch_block_stabs, read_type_number) (ref_map::stabs, ref_add, process_reference) (symbol_reference_defined, define_symbol, define_symbol) (error_type, read_type, read_member_functions, read_cpp_abbrev) (read_one_struct_field, read_struct_fields, read_baseclasses) (read_tilde_fields, read_struct_type, read_array_type) (read_enum_type, read_sun_builtin_type, read_sun_floating_type) (read_huge_number, read_range_type, read_args, common_block_start) (find_name_end): Constify. * stabsread.h (common_block_start, define_symbol) (process_one_symbol, symbol_reference_defined, ref_add): * symfile.c (get_section_index, add_symbol_file_command): * symfile.h (get_section_index): Constify. * target-descriptions.c (tdesc_type::name): Constify. (tdesc_free_type): Add cast. * target.c (find_default_run_target): (add_deprecated_target_alias, find_default_run_target) (target_announce_detach): Constify. (do_option): Constify. * target.h (add_deprecated_target_alias): Constify. * thread.c (print_thread_info_1): Constify. * top.c (deprecated_readline_begin_hook, command_line_input): Constify. (init_main): Add casts. * top.h (handle_line_of_input): Constify. * tracefile-tfile.c (tfile_write_uploaded_tsv): Constify. * tracepoint.c (tvariables_info_1, trace_status_mi): Constify. (tfind_command): Rename to ... (tfind_command_1): ... this and constify. (tfind_command): New function. (tfind_end_command, tfind_start_command): Adjust. (encode_source_string): Constify. * tracepoint.h (encode_source_string): Constify. * tui/tui-data.c (tui_partial_win_by_name): Constify. * tui/tui-data.h (tui_partial_win_by_name): Constify. * tui/tui-source.c (tui_set_source_content_nil): Constify. * tui/tui-source.h (tui_set_source_content_nil): Constify. * tui/tui-win.c (parse_scrolling_args): Constify. * tui/tui-windata.c (tui_erase_data_content): Constify. * tui/tui-windata.h (tui_erase_data_content): Constify. * tui/tui-winsource.c (tui_erase_source_content): Constify. * tui/tui.c (tui_enable): Add cast. * utils.c (defaulted_query): Constify. (init_page_info): Add cast. (puts_debug, subset_compare): Constify. * utils.h (subset_compare): Constify. * varobj.c (varobj_format_string): Constify. * varobj.h (varobj_format_string): Constify. * vax-tdep.c (vax_register_name): Constify. * windows-nat.c (windows_detach): Constify. * xcoffread.c (process_linenos, xcoff_next_symbol_text): Constify. * xml-support.c (gdb_xml_end_element): Constify. * xml-tdesc.c (tdesc_start_reg): Constify. * xstormy16-tdep.c (xstormy16_register_name): Constify. * xtensa-tdep.c (xtensa_find_register_by_name): Constify. * xtensa-tdep.h (xtensa_register_t::name): Constify. gdb/gdbserver/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * gdbreplay.c (sync_error): Constify. * linux-x86-low.c (push_opcode): Constify.
2017-04-05 20:21:37 +02:00
void (*deprecated_readline_begin_hook) (const char *, ...);
Fix build with Python 3.4 (PR python/16784) The type of the function pointer PyOS_ReadlineFunctionPointer (part of the Python C API), which we use, slightly changed starting with Python 3.4. The signature went from PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, char *); to PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, const char *); The parameter that changed is the prompt text. This commits adjust gdb accordingly by making the prompt_arg parameter const, as well as the fallouts of that. I needed to rework how annotations are added to the prompt, since the it is now const. If annotations are enabled, it will make a copy of the prompt overwrite the prompt variable that is used throughout the function. Otherwise, no copy is done and the original prompt_arg value is passed. I changed the signature of deprecated_readline_hook. I would've changed any user of it, but it seems like nothing is using it, Built-tested with python 2.7.x, 3.3.y and 3.4.z. gdb/ChangeLog: * defs.h (gdb_readline): Constify argument. (gdb_readline_wrapper): Same. (command_line_input): Same. (deprecated_readline_hook): Same. * top.c (deprecated_readline_hook): Same. (gdb_readline): Same. (gdb_readline_wrapper): Same. (command_line_input): Constify argument. Pass prompt to called functions instead of local_prompt, overwriting prompt if using annotations. * event-top.h (display_gdb_prompt): Constify argument. * event-top.c (display_gdb_prompt): Same. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Constify argument if building with Python 3.4 and up. Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
2014-12-15 17:38:03 +01:00
char *(*deprecated_readline_hook) (const char *);
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-22 01:52:21 +02:00
void (*deprecated_readline_end_hook) (void);
1999-09-28 23:55:21 +02:00
/* Called as appropriate to notify the interface that we have attached
to or detached from an already running process. */
1999-09-28 23:55:21 +02:00
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-22 01:52:21 +02:00
void (*deprecated_attach_hook) (void);
void (*deprecated_detach_hook) (void);
1999-09-28 23:55:21 +02:00
/* Called when going to wait for the target. Usually allows the GUI
to run while waiting for target events. */
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-22 01:52:21 +02:00
ptid_t (*deprecated_target_wait_hook) (ptid_t ptid,
* target.h (TARGET_WNOHANG): New. * target.c (target_wait): Add `options' argument. Adjust. (struct target_ops) <to_wait>: Add `options' argument. (target_wait): Add `options' argument. * infrun.c (wait_for_inferior): Pass 0 as options to target_wait (blocking wait). (fetch_inferior_event): Pass TARGET_WNOHANG as options to target_wait. * fork-child.c (startup_inferior): Pass 0 as options to target_wait (blocking wait). * linux-nat.c (linux_nat_create_inferior): Remove async masking. (linux_nat_wait_1): Add `target_options' argument. Use it instead of checking on target_can_async_p. (linux_nat_wait): Add `target_options' argument. Adjust. * remote.c (remote_wait_ns): Add `options' argument. Adjust to check on TARGET_WNOWAIT instead of checking on remote_is_async_p. (remote_wait_as): Add `options' argument. Adjust to check on TARGET_WNOWAIT instead of checking on remote_is_async_p. If doing a blocking wait, keep waiting until an interesting event comes out. (remote_wait): Add `options' argument. Don't loop here if the target is in async mode, and a blocking wait has been requested. * top.c (deprecated_target_wait_hook): Add `options' argument. * linux-thread-db.c (thread_db_wait): Add `options' argument, and pass it down to the layer beneath. * inf-ptrace.c (inf_ptrace_wait): Add `options' argument. * record.c (record_beneath_to_wait): Add `options' argument. (record_wait): Add `options' argument, and pass it down to the layer beneath. * bsd-uthread.c (bsd_uthread_wait): Add `options' argument. * darwin-nat.c (darwin_wait): Likewise. * defs.h (deprecated_target_wait_hook): Likewise. * gnu-nat.c (gnu_wait): Add `options' argument. * go32-nat.c (go32_wait): Likewise. * hpux-thread.c (hpux_thread_wait): Add `options' argument, and pass it down to the layer beneath. * inf-ttrace.c (inf_ttrace_wait): Add `options' argument. * monitor.c (monitor_wait): Likewise. * nto-procfs.c (procfs_wait): Likewise. * remote-mips.c (mips_wait): Add `options' argument. * remote-sim.c (gdbsim_wait): Likewise. * rs6000-nat.c (rs6000_wait): Add `options' argument. * sol-thread.c (sol_thread_wait): Add `options' argument, and pass it down to the layer beneath. * spu-linux-nat.c (spu_child_wait): Add `options' argument. * windows-nat.c (windows_wait): Likewise. * tui/tui-hooks.c (tui_target_wait_hook): Likewise. Adjust.
2009-05-21 17:48:42 +02:00
struct target_waitstatus *status,
int options);
/* Used by UI as a wrapper around command execution. May do various
things like enabling/disabling buttons, etc... */
void (*deprecated_call_command_hook) (struct cmd_list_element * c,
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
const char *cmd, int from_tty);
/* Called when the current thread changes. Argument is thread id. */
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-22 01:52:21 +02:00
void (*deprecated_context_hook) (int id);
/* The highest UI number ever assigned. */
static int highest_ui_num;
/* See top.h. */
ui::ui (FILE *instream_, FILE *outstream_, FILE *errstream_)
: next (nullptr),
num (++highest_ui_num),
call_readline (nullptr),
input_handler (nullptr),
command_editing (0),
interp_info (nullptr),
async (0),
secondary_prompt_depth (0),
stdin_stream (instream_),
instream (instream_),
outstream (outstream_),
errstream (errstream_),
input_fd (fileno (instream)),
input_interactive_p (ISATTY (instream)),
prompt_state (PROMPT_NEEDED),
m_gdb_stdout (new stdio_file (outstream)),
m_gdb_stdin (new stdio_file (instream)),
m_gdb_stderr (new stderr_file (errstream)),
m_gdb_stdlog (m_gdb_stderr),
m_current_uiout (nullptr)
{
buffer_init (&line_buffer);
if (ui_list == NULL)
ui_list = this;
else
{
struct ui *last;
for (last = ui_list; last->next != NULL; last = last->next)
;
last->next = this;
}
}
ui::~ui ()
{
struct ui *ui, *uiprev;
uiprev = NULL;
for (ui = ui_list; ui != NULL; uiprev = ui, ui = ui->next)
if (ui == this)
break;
gdb_assert (ui != NULL);
if (uiprev != NULL)
uiprev->next = next;
else
ui_list = next;
delete m_gdb_stdin;
delete m_gdb_stdout;
delete m_gdb_stderr;
}
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
/* Open file named NAME for read/write, making sure not to make it the
controlling terminal. */
static gdb_file_up
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
open_terminal_stream (const char *name)
{
int fd;
fd = gdb_open_cloexec (name, O_RDWR | O_NOCTTY, 0);
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
if (fd < 0)
perror_with_name (_("opening terminal failed"));
return gdb_file_up (fdopen (fd, "w+"));
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
}
/* Implementation of the "new-ui" command. */
static void
new_ui_command (const char *args, int from_tty)
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
{
int argc;
const char *interpreter_name;
const char *tty_name;
dont_repeat ();
Introduce gdb_argv, a class wrapper for buildargv This introduces gdb_argv, a class wrapping an "argv" pointer; that is, a pointer to a NULL-terminated array of char*, where both the array and each non-NULL element in the array are xmalloc'd. This patch then changes most users of gdb_buildargv to use gdb_argv instead. ChangeLog 2017-08-03 Tom Tromey <tom@tromey.com> * utils.h (struct gdb_argv_deleter): New. (gdb_argv): New class. * utils.c (gdb_argv::reset): New method. * tracepoint.c (delete_trace_variable_command): Use gdb_argv. * tracefile.c (tsave_command): Use gdb_argv. * top.c (new_ui_command): Use gdb_argv. * symmisc.c (maintenance_print_symbols) (maintenance_print_msymbols, maintenance_expand_symtabs): Use gdb_argv. * symfile.c (symbol_file_command, generic_load) (remove_symbol_file_command): Use gdb_argv. * stack.c (backtrace_command): Use gdb_argv. * source.c (add_path, show_substitute_path_command) (unset_substitute_path_command, set_substitute_path_command): Use gdb_argv. * skip.c (skip_command): Use gdb_argv. Use gdb_buildargv. * ser-mingw.c (pipe_windows_open): Use gdb_argv. * remote.c (extended_remote_run, remote_put_command) (remote_get_command, remote_delete_command): Use gdb_argv. * remote-sim.c (gdbsim_load, gdbsim_create_inferior) (gdbsim_open): Use gdb_argv. * python/py-cmd.c (gdbpy_string_to_argv): Use gdb_argv. * psymtab.c (maintenance_print_psymbols): Use gdb_argv. * procfs.c (procfs_info_proc): Use gdb_argv. * interps.c (interpreter_exec_cmd): Use gdb_argv. * infrun.c (handle_command): Use gdb_argv. * inferior.c (add_inferior_command, clone_inferior_command): Use gdb_argv. * guile/scm-string.c (gdbscm_string_to_argv): Use gdb_argv. * exec.c (exec_file_command): Use gdb_argv. * cli/cli-cmds.c (alias_command): Use gdb_argv. * compile/compile.c (build_argc_argv): Use gdb_argv.
2017-05-01 07:02:30 +02:00
gdb_argv argv (args);
argc = argv.count ();
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
if (argc < 2)
error (_("Usage: new-ui INTERPRETER TTY"));
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
interpreter_name = argv[0];
tty_name = argv[1];
{
scoped_restore save_ui = make_scoped_restore (&current_ui);
/* Open specified terminal. Note: we used to open it three times,
once for each of stdin/stdout/stderr, but that does not work
with Windows named pipes. */
gdb_file_up stream = open_terminal_stream (tty_name);
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
std::unique_ptr<ui> ui
(new struct ui (stream.get (), stream.get (), stream.get ()));
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
ui->async = 1;
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
current_ui = ui.get ();
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
set_top_level_interpreter (interpreter_name);
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
interp_pre_command_loop (top_level_interpreter ());
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
/* Make sure the file is not closed. */
stream.release ();
ui.release ();
}
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
printf_unfiltered ("New UI allocated\n");
}
/* Handler for SIGHUP. */
#ifdef SIGHUP
1999-05-25 20:09:09 +02:00
/* NOTE 1999-04-29: This function will be static again, once we modify
1999-05-11 15:35:55 +02:00
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c. */
/* static */ void
quit_cover (void)
{
/* Stop asking user for confirmation --- we're exiting. This
prevents asking the user dumb questions. */
confirm = 0;
1999-07-07 22:19:36 +02:00
quit_command ((char *) 0, 0);
}
#endif /* defined SIGHUP */
gdb * windows-tdep.c (windows_xfer_shared_library): * windows-nat.c (get_module_name, windows_make_so): * v850-tdep.c (v850_handle_pushm): * utils.c (null_cleanup, gdb_realpath): * ui-out.c (get_next_header): * tracepoint.c (clear_traceframe_info): * symtab.c (lookup_symtab): * serial.h (struct serial_ops): * mipsread.c (read_alphacoff_dynamic_symtab): * infcmd.c (print_return_value): * ia64-linux-tdep.c (ia64_linux_sigcontext_register_address): * f-exp.y (parse_number): * exceptions.c (catch_exceptions): * dummy-frame.c (dummy_frame_this_id): * defs.h (struct cleanup): * breakpoint.c (disable_breakpoints_in_unloaded_shlib): * arm-tdep.c (arm_push_dummy_call): * amd64-tdep.h (amd64_collect_xsave): * amd64-tdep.c (amd64_collect_xsave): * alpha-tdep.c (alpha_heuristic_frame_unwind_cache): * README (typing): Remove duplicate words. * cli/cli-decode.c (lookup_cmd_composition): Add comma. * infrun.c (siginfo_value_read): Fix typo. * solib-frv.c (frv_fdpic_find_global_pointer): Likewise. * top.c (source_line_number): Add comma. gdb/doc * gdbint.texinfo (Register Information Functions): Remove duplicate "the". * gdb.texinfo (Emacs): Remove duplicate "to". (GDB/MI Variable Objects): Remove duplicate "the". (General Query Packets): Likewise. gdb/testsuite * gdb.mi/mi-nsmoribund.exp: * gdb.hp/gdb.objdbg/objdbg01.exp: * gdb.base/structs.exp (test_struct_returns): * gdb.base/call-sc.exp (test_scalar_returns): * gdb.base/bigcore.exp: Remove duplicate words. gdb/gdbserver * win32-low.c (handle_load_dll): Remove duplicate "the".
2011-04-19 20:04:11 +02:00
/* Line number we are currently in, in a file which is being sourced. */
1999-05-25 20:09:09 +02:00
/* NOTE 1999-04-29: This variable will be static again, once we modify
1999-05-11 15:35:55 +02:00
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c. */
1999-05-11 15:35:55 +02:00
/* static */ int source_line_number;
/* Name of the file we are sourcing. */
1999-05-25 20:09:09 +02:00
/* NOTE 1999-04-29: This variable will be static again, once we modify
1999-05-11 15:35:55 +02:00
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c. */
Fix error message and use-after-free on errors in nested sourced files Errors that happen in nested sourced files (when a sourced file sources another file) lead to a wrong error message, or use-after-free. For example, if I put this in "a.gdb": command_that_doesnt_exist and this in "b.gdb": source a.gdb and try to "source b.gdb" in GDB, the result may look like this: (gdb) source b.gdb b.gdb:1: Error in sourced command file: _that_doesnt_exist:1: Error in sourced command file: Undefined command: "command_that_doesnt_exist". Try "help". Notice the wrong file name where "a.gdb" should be. The exact result may differ, depending on the feelings of the memory allocator. What happens is: - The "source a.gdb" command is saved by command_line_append_input_line in command_line_input's static buffer. - Since we are sourcing a file, the script_from_file function stores the script name (a.gdb) in the source_file_name global. However, it doesn't do a copy, it just saves a pointer to command_line_input's static buffer. - The "command_that_doesnt_exist" command is saved by command_line_append_input_line in command_line_input's static buffer. Depending on what xrealloc does, source_file_name may now point to freed memory, or at the minimum the data it was pointing to was overwritten. - When the error is handled in script_from_file, we dererence source_file_name to print the name of the file in which the error occured. To fix it, I made source_file_name an std::string, so that keeps a copy of the file name instead of pointing to a buffer with a too small lifetime. With this patch, the expected filename is printed, and no use-after-free occurs: (gdb) source b.gdb b.gdb:1: Error in sourced command file: a.gdb:1: Error in sourced command file: Undefined command: "command_that_doesnt_exist". Try "help". I passed explicit template parameters to make_scoped_restore (<std::string, const std::string &>), so that the second parameter is passed by reference and avoid a copy. It was not as obvious as I first thought to change gdb.base/source.exp to test this, because source commands inside sourced files are interpreted relative to GDB's current working directory, not the directory of the currently sourced file. As a workaround, I moved the snippet that tests errors after the snippet that adds the source directory to the search path. This way, the "source source-error-1.gdb" line in source-error.exp manages to find the file. For reference, here is what ASAN reports when use-after-free occurs: (gdb) source b.gdb ================================================================= ==18498==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c000019847 at pc 0x7f1d3645de8e bp 0x7ffdcb892e50 sp 0x7ffdcb8925c8 READ of size 6 at 0x60c000019847 thread T0 #0 0x7f1d3645de8d in printf_common /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors_format.inc:546 #1 0x7f1d36477175 in __interceptor_vasprintf /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:1525 #2 0x5632eaffa277 in xstrvprintf(char const*, __va_list_tag*) /home/simark/src/binutils-gdb/gdb/common/common-utils.c:122 #3 0x5632eaff96d1 in throw_it /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:351 #4 0x5632eaff98df in throw_verror(errors, char const*, __va_list_tag*) /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:379 #5 0x5632eaff9a2a in throw_error(errors, char const*, ...) /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:394 #6 0x5632eafca21a in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1553 #7 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #8 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #9 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #10 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #11 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #12 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #13 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #14 0x5632ebf3cf09 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:425 #15 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547 #16 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #17 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #18 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #19 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #20 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #21 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #22 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #23 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770 #24 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213 #25 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220 #26 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175 #27 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192 #28 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511 #29 0x5632eb3aa6a9 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733 #30 0x5632eb3aaf41 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859 #31 0x5632eb3a88ea in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:347 #32 0x5632eb3a89bf in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371 #33 0x5632eb76fbfc in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:330 #34 0x5632eb772ea8 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1176 #35 0x5632eb773071 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1192 #36 0x5632eabfe7f9 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32 #37 0x7f1d3554f222 in __libc_start_main (/usr/lib/libc.so.6+0x24222) #38 0x5632eabfe5dd in _start (/home/simark/build/binutils-gdb/gdb/gdb+0x195d5dd) 0x60c000019847 is located 7 bytes inside of 128-byte region [0x60c000019840,0x60c0000198c0) freed by thread T0 here: #0 0x7f1d36502491 in __interceptor_realloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:105 #1 0x5632eaff9f47 in xrealloc /home/simark/src/binutils-gdb/gdb/common/common-utils.c:62 #2 0x5632eaff6b44 in buffer_grow(buffer*, char const*, unsigned long) /home/simark/src/binutils-gdb/gdb/common/buffer.c:40 #3 0x5632eb3b271d in command_line_append_input_line /home/simark/src/binutils-gdb/gdb/event-top.c:614 #4 0x5632eb3b28c6 in handle_line_of_input(buffer*, char const*, int, char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:654 #5 0x5632ebf402a6 in command_line_input(char const*, char const*) /home/simark/src/binutils-gdb/gdb/top.c:1252 #6 0x5632ebf3cee9 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:422 #7 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547 #8 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #9 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #10 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #11 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #12 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #13 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #14 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #15 0x5632ebf3cf09 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:425 #16 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547 #17 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #18 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #19 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #20 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #21 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #22 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #23 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #24 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770 #25 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213 #26 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220 #27 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175 #28 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192 #29 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511 previously allocated by thread T0 here: #0 0x7f1d36502491 in __interceptor_realloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:105 #1 0x5632eaff9f47 in xrealloc /home/simark/src/binutils-gdb/gdb/common/common-utils.c:62 #2 0x5632eaff6b44 in buffer_grow(buffer*, char const*, unsigned long) /home/simark/src/binutils-gdb/gdb/common/buffer.c:40 #3 0x5632eb3b271d in command_line_append_input_line /home/simark/src/binutils-gdb/gdb/event-top.c:614 #4 0x5632eb3b28c6 in handle_line_of_input(buffer*, char const*, int, char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:654 #5 0x5632ebf402a6 in command_line_input(char const*, char const*) /home/simark/src/binutils-gdb/gdb/top.c:1252 #6 0x5632ebf3cee9 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:422 #7 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547 #8 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #9 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #10 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #11 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #12 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #13 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #14 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #15 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770 #16 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213 #17 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220 #18 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175 #19 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192 #20 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511 #21 0x5632eb3aa6a9 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733 #22 0x5632eb3aaf41 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859 #23 0x5632eb3a88ea in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:347 #24 0x5632eb3a89bf in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371 #25 0x5632eb76fbfc in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:330 #26 0x5632eb772ea8 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1176 #27 0x5632eb773071 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1192 #28 0x5632eabfe7f9 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32 #29 0x7f1d3554f222 in __libc_start_main (/usr/lib/libc.so.6+0x24222) SUMMARY: AddressSanitizer: heap-use-after-free /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors_format.inc:546 in printf_common gdb/ChangeLog: * top.h (source_file_name): Change to std::string. * top.c (source_file_name): Likewise. (command_line_input): Adjust. * cli/cli-script.c (script_from_file): Adjust. gdb/testsuite/ChangeLog: * gdb.base/source.exp: Move "error in sourced script" code to the end. * gdb.base/source-error.gdb: Move contents to source-error-1.gdb. Add new code to source source-error-1.gdb. * gdb.base/source-error-1.gdb: New file, from previous source-error.gdb.
2019-02-20 03:10:18 +01:00
/* static */ std::string source_file_name;
/* Read commands from STREAM. */
void
2000-07-30 03:48:28 +02:00
read_command_file (FILE *stream)
{
struct ui *ui = current_ui;
scoped_restore save_instream
= make_scoped_restore (&ui->instream, stream);
/* Read commands from `instream' and execute them until end of file
or error reading instream. */
while (ui->instream != NULL && !feof (ui->instream))
{
const char *command;
/* Get a command-line. This calls the readline package. */
command = command_line_input (NULL, NULL);
if (command == NULL)
break;
command_handler (command);
}
}
void (*pre_init_ui_hook) (void);
2000-05-22 07:43:39 +02:00
#ifdef __MSDOS__
static void
2000-05-22 07:43:39 +02:00
do_chdir_cleanup (void *old_dir)
{
chdir ((const char *) old_dir);
2000-12-15 02:01:51 +01:00
xfree (old_dir);
2000-05-22 07:43:39 +02:00
}
#endif
scoped_value_mark
prepare_execute_command ()
Implement TARGET_OBJECT_STACK_MEMORY. * NEWS: Add note on new "set stack-cache" option. * corefile.c (read_stack): New function. * dcache.c (dcache_struct): New member ptid. (dcache_enable_p): Mark as obsolete. (show_dcache_enabled_p): Flag option as deprecated. (dcache_invalidate): Update ptid. (dcache_invalidate_line): New function. (dcache_read_line): No longer check cacheable attribute, stack accesses get cached despite attribute. (dcache_init): Set ptid. (dcache_xfer_memory): Flush cache if from different ptid than before. Update cache after write. (dcache_update): New function. (dcache_info): Report ptid. (_initialize_dcache): Update text for `remotecache' to indicate it is obsolete. * dcache.h (dcache_update): Declare. * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with set_value_stack. * frame-unwind.c (frame_unwind_got_memory): Ditto. * gdbcore.h (read_stack): Declare. * memattr.c (mem_enable_command): Call target_dcache_invalidate instead of dcache_invalidate. (mem_disable_command, mem_delete_command): Ditto. * target.c (stack_cache_enabled_p_1): New static global. (stack_cache_enabled_p): New static global. (set_stack_cache_enabled_p): New function. (show_stack_cache_enabled_p): New function. (target_dcache): Make static. (target_dcache_invalidate): New function. (target_load, target_resume): Call target_dcache_invalidate instead of dcache_invalidate. (memory_xfer_partial): New arg object, all callers updated. Check for existing inferior before calling dcache routines. When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache. (target_xfer_partial): Call memory_xfer_partial for TARGET_OBJECT_STACK_MEMORY. (target_read_stack): New function. (initialize_targets): Install new option `stack-cache'. * target.h: Remove #include of dcache.h. (enum target_object): New value TARGET_OBJECT_STACK_MEMORY. (target_dcache): Delete. (target_dcache_invalidate): Declare. (target_read_stack): Declare. * top.c (prepare_execute_command): New function. (execute_command): Call prepare_execute_command instead of free_all_values. * top.h (prepare_execute_command): Declare. * valops.c (get_value_at): New function. (value_at): Guts moved to get_value_at. (value_at_lazy): Similarly. (value_fetch_lazy): Call read_stack for stack values. * value.c (struct value): New member `stack'. (value_stack, set_value_stack): New functions. * value.h (value_stack, set_value_stack): Declare. * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command instead of free_all_values. doc/ * gdb.texinfo (Caching Data of Remote Targets): Update text. Mark `set/show remotecache' options as obsolete. Document new `set/show stack-cache' option. Update text for `info dcache'.
2009-08-31 22:18:46 +02:00
{
/* With multiple threads running while the one we're examining is
stopped, the dcache can get stale without us being able to detect
it. For the duration of the command, though, use the dcache to
help things like backtrace. */
Implement TARGET_OBJECT_STACK_MEMORY. * NEWS: Add note on new "set stack-cache" option. * corefile.c (read_stack): New function. * dcache.c (dcache_struct): New member ptid. (dcache_enable_p): Mark as obsolete. (show_dcache_enabled_p): Flag option as deprecated. (dcache_invalidate): Update ptid. (dcache_invalidate_line): New function. (dcache_read_line): No longer check cacheable attribute, stack accesses get cached despite attribute. (dcache_init): Set ptid. (dcache_xfer_memory): Flush cache if from different ptid than before. Update cache after write. (dcache_update): New function. (dcache_info): Report ptid. (_initialize_dcache): Update text for `remotecache' to indicate it is obsolete. * dcache.h (dcache_update): Declare. * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with set_value_stack. * frame-unwind.c (frame_unwind_got_memory): Ditto. * gdbcore.h (read_stack): Declare. * memattr.c (mem_enable_command): Call target_dcache_invalidate instead of dcache_invalidate. (mem_disable_command, mem_delete_command): Ditto. * target.c (stack_cache_enabled_p_1): New static global. (stack_cache_enabled_p): New static global. (set_stack_cache_enabled_p): New function. (show_stack_cache_enabled_p): New function. (target_dcache): Make static. (target_dcache_invalidate): New function. (target_load, target_resume): Call target_dcache_invalidate instead of dcache_invalidate. (memory_xfer_partial): New arg object, all callers updated. Check for existing inferior before calling dcache routines. When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache. (target_xfer_partial): Call memory_xfer_partial for TARGET_OBJECT_STACK_MEMORY. (target_read_stack): New function. (initialize_targets): Install new option `stack-cache'. * target.h: Remove #include of dcache.h. (enum target_object): New value TARGET_OBJECT_STACK_MEMORY. (target_dcache): Delete. (target_dcache_invalidate): Declare. (target_read_stack): Declare. * top.c (prepare_execute_command): New function. (execute_command): Call prepare_execute_command instead of free_all_values. * top.h (prepare_execute_command): Declare. * valops.c (get_value_at): New function. (value_at): Guts moved to get_value_at. (value_at_lazy): Similarly. (value_fetch_lazy): Call read_stack for stack values. * value.c (struct value): New member `stack'. (value_stack, set_value_stack): New functions. * value.h (value_stack, set_value_stack): Declare. * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command instead of free_all_values. doc/ * gdb.texinfo (Caching Data of Remote Targets): Update text. Mark `set/show remotecache' options as obsolete. Document new `set/show stack-cache' option. Update text for `info dcache'.
2009-08-31 22:18:46 +02:00
if (non_stop)
target_dcache_invalidate ();
return scoped_value_mark ();
Implement TARGET_OBJECT_STACK_MEMORY. * NEWS: Add note on new "set stack-cache" option. * corefile.c (read_stack): New function. * dcache.c (dcache_struct): New member ptid. (dcache_enable_p): Mark as obsolete. (show_dcache_enabled_p): Flag option as deprecated. (dcache_invalidate): Update ptid. (dcache_invalidate_line): New function. (dcache_read_line): No longer check cacheable attribute, stack accesses get cached despite attribute. (dcache_init): Set ptid. (dcache_xfer_memory): Flush cache if from different ptid than before. Update cache after write. (dcache_update): New function. (dcache_info): Report ptid. (_initialize_dcache): Update text for `remotecache' to indicate it is obsolete. * dcache.h (dcache_update): Declare. * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with set_value_stack. * frame-unwind.c (frame_unwind_got_memory): Ditto. * gdbcore.h (read_stack): Declare. * memattr.c (mem_enable_command): Call target_dcache_invalidate instead of dcache_invalidate. (mem_disable_command, mem_delete_command): Ditto. * target.c (stack_cache_enabled_p_1): New static global. (stack_cache_enabled_p): New static global. (set_stack_cache_enabled_p): New function. (show_stack_cache_enabled_p): New function. (target_dcache): Make static. (target_dcache_invalidate): New function. (target_load, target_resume): Call target_dcache_invalidate instead of dcache_invalidate. (memory_xfer_partial): New arg object, all callers updated. Check for existing inferior before calling dcache routines. When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache. (target_xfer_partial): Call memory_xfer_partial for TARGET_OBJECT_STACK_MEMORY. (target_read_stack): New function. (initialize_targets): Install new option `stack-cache'. * target.h: Remove #include of dcache.h. (enum target_object): New value TARGET_OBJECT_STACK_MEMORY. (target_dcache): Delete. (target_dcache_invalidate): Declare. (target_read_stack): Declare. * top.c (prepare_execute_command): New function. (execute_command): Call prepare_execute_command instead of free_all_values. * top.h (prepare_execute_command): Declare. * valops.c (get_value_at): New function. (value_at): Guts moved to get_value_at. (value_at_lazy): Similarly. (value_fetch_lazy): Call read_stack for stack values. * value.c (struct value): New member `stack'. (value_stack, set_value_stack): New functions. * value.h (value_stack, set_value_stack): Declare. * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command instead of free_all_values. doc/ * gdb.texinfo (Caching Data of Remote Targets): Update text. Mark `set/show remotecache' options as obsolete. Document new `set/show stack-cache' option. Update text for `info dcache'.
2009-08-31 22:18:46 +02:00
}
/* Tell the user if the language has changed (except first time) after
executing a command. */
void
check_frame_language_change (void)
{
static int warned = 0;
struct frame_info *frame;
/* First make sure that a new frame has been selected, in case the
command or the hooks changed the program state. */
frame = deprecated_safe_get_selected_frame ();
if (current_language != expected_language)
{
if (language_mode == language_mode_auto && info_verbose)
{
language_info (1); /* Print what changed. */
}
warned = 0;
}
/* Warn the user if the working language does not match the language
of the current frame. Only warn the user if we are actually
running the program, i.e. there is a stack. */
/* FIXME: This should be cacheing the frame and only running when
the frame changes. */
if (has_stack_frames ())
{
enum language flang;
flang = get_frame_language (frame);
if (!warned
&& flang != language_unknown
&& flang != current_language->la_language)
{
printf_filtered ("%s\n", _(lang_frame_mismatch_warn));
warned = 1;
}
}
}
gdb/17347 - Regression: GDB stopped on run with attached process Doing: gdb --pid=PID -ex run Results in GDB getting a SIGTTIN, and thus ending stopped. That's usually indicative of a missing target_terminal_ours call. E.g., from the PR: $ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run [1] 28263 [1] Killed sleep 1h [2]+ Stopped gdb -batch sleep $p -ex run The workaround is doing: gdb -ex "attach $PID" -ex "run" instead of gdb [-p] $PID -ex "run" With the former, gdb waits for the attach command to complete before moving on to the "run" command, because the interpreter is in sync mode at this point, within execute_command. But for the latter, attach_command is called directly from captured_main, and thus misses that waiting. IOW, "run" is running before the attach continuation has run, before the program stops and attach completes. The broken terminal settings are just one symptom of that. Any command that queries or requires input results in the same. The fix is to wait in catch_command_errors (which is specific to main.c nowadays), just like we wait in execute_command. gdb/ChangeLog: 2014-09-11 Pedro Alves <palves@redhat.com> PR gdb/17347 * main.c: Include "infrun.h". (catch_command_errors, catch_command_errors_const): Wait for the foreground command to complete. * top.c (maybe_wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... here. * top.h (maybe_wait_sync_command_done): New declaration. gdb/testsuite/ChangeLog: 2014-09-11 Pedro Alves <palves@redhat.com> PR gdb/17347 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure. * gdb.base/attach.exp (test_command_line_attach_run): New procedure. (top level): Call it.
2014-09-11 14:04:15 +02:00
/* See top.h. */
Merge async and sync code paths some more This patch makes the execution control code use largely the same mechanisms in both sync- and async-capable targets. This means using continuations and use the event loop to react to target events on sync targets as well. The trick is to immediately mark infrun's event loop source after resume instead of calling wait_for_inferior. Then fetch_inferior_event is adjusted to do a blocking wait on sync targets. Tested on x86_64 Fedora 20, native and gdbserver, with and without "maint set target-async off". gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * breakpoint.c (bpstat_do_actions_1, until_break_command): Don't check whether the target can async. * inf-loop.c (inferior_event_handler): Only call target_async if the target can async. * infcall.c: Include top.h and interps.h. (run_inferior_call): For the interpreter to sync mode while running the infcall. Call wait_sync_command_done instead of wait_for_inferior plus normal_stop. * infcmd.c (prepare_execution_command): Don't check whether the target can async when running in the foreground. (step_1): Delete synchronous case handling. (step_once): Always install a continuation, even in sync mode. (until_next_command, finish_forward): Don't check whether the target can async. (attach_command_post_wait, notice_new_inferior): Always install a continuation, even in sync mode. * infrun.c (mark_infrun_async_event_handler): New function. (proceed): In sync mode, mark infrun's event source instead of waiting for events here. (fetch_inferior_event): If the target can't async, do a blocking wait. (prepare_to_wait): In sync mode, mark infrun's event source. (infrun_async_inferior_event_handler): No longer bail out if the target can't async. * infrun.h (mark_infrun_async_event_handler): New declaration. * linux-nat.c (linux_nat_wait_1): Remove calls to set_sigint_trap/clear_sigint_trap. (linux_nat_terminal_inferior): No longer check whether the target can async. * mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify comment. (mi_execute_command_input_handler): No longer check whether the target is async. Update and simplify comment. * target.c (default_target_wait): New function. * target.h (struct target_ops) <to_wait>: Now defaults to default_target_wait. (default_target_wait): Declare. * top.c (wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... this. * top.h (wait_sync_command_done): Declare. * target-delegates.c: Regenerate.
2015-09-09 19:23:23 +02:00
void
wait_sync_command_done (void)
{
new-ui command: gdb internal errors if input is already pending I noticed that if input is already pending on the new-ui TTY, gdb internal-errors. E.g., create /dev/pts/2, and type anything there (even just <return> is sufficient). Now start GDB creating a new UI on that TTY, while at the same time, running a synchronous execution command. Something like: $ gdb program -ex "new-ui console /dev/pts/2" -ex "start" Back on /dev/pts/2, we get: (gdb) .../src/gdb/event-top.c:360: internal-error: double prompt A problem internal to GDB has been detected, further debugging may prove unreliable. While the main UI was waiting for "start" to finish, gdb kepts pumping events, including the input fd of the extra console. The problem is that stdin_event_handler doesn't restore the current UI back to what it was, assuming that it's only ever called from the top level event loop. However, in this case, it's being called from the nested event loop from within maybe_wait_sync_command_done. When finally the "start" command is done, we reach the code that prints the prompt in the main UI, just before starting the main event loop. Since now the current UI is pointing at the extra console (by mistake), we find ourselves printing a double prompt on the extra console. This is caught by the assertion that fails, as shown above. Since other event handlers also don't restore the UI (e.g., signal event handlers), I think it's better if whatever is pumping events to take care to restore the UI, if it cares. That's what this patch does. New test included. gdb/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * top.c (wait_sync_command_done): Don't assume current_ui doesn't change across events. Restore the current UI before returning. (gdb_readline_wrapper): Restore the current UI before returning. gdb/testsuite/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * gdb.base/new-ui-pending-input.c: New file. * gdb.base/new-ui-pending-input.exp: New file. * gdb.exp (clear_gdb_spawn_id): New procedure. (with_spawn_id): Check whether gdb_spawn_id exists before referencing it. If gdb_spawn_id didn't exist on entry, clear it on exit.
2016-09-07 00:29:25 +02:00
/* Processing events may change the current UI. */
scoped_restore save_ui = make_scoped_restore (&current_ui);
new-ui command: gdb internal errors if input is already pending I noticed that if input is already pending on the new-ui TTY, gdb internal-errors. E.g., create /dev/pts/2, and type anything there (even just <return> is sufficient). Now start GDB creating a new UI on that TTY, while at the same time, running a synchronous execution command. Something like: $ gdb program -ex "new-ui console /dev/pts/2" -ex "start" Back on /dev/pts/2, we get: (gdb) .../src/gdb/event-top.c:360: internal-error: double prompt A problem internal to GDB has been detected, further debugging may prove unreliable. While the main UI was waiting for "start" to finish, gdb kepts pumping events, including the input fd of the extra console. The problem is that stdin_event_handler doesn't restore the current UI back to what it was, assuming that it's only ever called from the top level event loop. However, in this case, it's being called from the nested event loop from within maybe_wait_sync_command_done. When finally the "start" command is done, we reach the code that prints the prompt in the main UI, just before starting the main event loop. Since now the current UI is pointing at the extra console (by mistake), we find ourselves printing a double prompt on the extra console. This is caught by the assertion that fails, as shown above. Since other event handlers also don't restore the UI (e.g., signal event handlers), I think it's better if whatever is pumping events to take care to restore the UI, if it cares. That's what this patch does. New test included. gdb/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * top.c (wait_sync_command_done): Don't assume current_ui doesn't change across events. Restore the current UI before returning. (gdb_readline_wrapper): Restore the current UI before returning. gdb/testsuite/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * gdb.base/new-ui-pending-input.c: New file. * gdb.base/new-ui-pending-input.exp: New file. * gdb.exp (clear_gdb_spawn_id): New procedure. (with_spawn_id): Check whether gdb_spawn_id exists before referencing it. If gdb_spawn_id didn't exist on entry, clear it on exit.
2016-09-07 00:29:25 +02:00
struct ui *ui = current_ui;
Merge async and sync code paths some more This patch makes the execution control code use largely the same mechanisms in both sync- and async-capable targets. This means using continuations and use the event loop to react to target events on sync targets as well. The trick is to immediately mark infrun's event loop source after resume instead of calling wait_for_inferior. Then fetch_inferior_event is adjusted to do a blocking wait on sync targets. Tested on x86_64 Fedora 20, native and gdbserver, with and without "maint set target-async off". gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * breakpoint.c (bpstat_do_actions_1, until_break_command): Don't check whether the target can async. * inf-loop.c (inferior_event_handler): Only call target_async if the target can async. * infcall.c: Include top.h and interps.h. (run_inferior_call): For the interpreter to sync mode while running the infcall. Call wait_sync_command_done instead of wait_for_inferior plus normal_stop. * infcmd.c (prepare_execution_command): Don't check whether the target can async when running in the foreground. (step_1): Delete synchronous case handling. (step_once): Always install a continuation, even in sync mode. (until_next_command, finish_forward): Don't check whether the target can async. (attach_command_post_wait, notice_new_inferior): Always install a continuation, even in sync mode. * infrun.c (mark_infrun_async_event_handler): New function. (proceed): In sync mode, mark infrun's event source instead of waiting for events here. (fetch_inferior_event): If the target can't async, do a blocking wait. (prepare_to_wait): In sync mode, mark infrun's event source. (infrun_async_inferior_event_handler): No longer bail out if the target can't async. * infrun.h (mark_infrun_async_event_handler): New declaration. * linux-nat.c (linux_nat_wait_1): Remove calls to set_sigint_trap/clear_sigint_trap. (linux_nat_terminal_inferior): No longer check whether the target can async. * mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify comment. (mi_execute_command_input_handler): No longer check whether the target is async. Update and simplify comment. * target.c (default_target_wait): New function. * target.h (struct target_ops) <to_wait>: Now defaults to default_target_wait. (default_target_wait): Declare. * top.c (wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... this. * top.h (wait_sync_command_done): Declare. * target-delegates.c: Regenerate.
2015-09-09 19:23:23 +02:00
while (gdb_do_one_event () >= 0)
new-ui command: gdb internal errors if input is already pending I noticed that if input is already pending on the new-ui TTY, gdb internal-errors. E.g., create /dev/pts/2, and type anything there (even just <return> is sufficient). Now start GDB creating a new UI on that TTY, while at the same time, running a synchronous execution command. Something like: $ gdb program -ex "new-ui console /dev/pts/2" -ex "start" Back on /dev/pts/2, we get: (gdb) .../src/gdb/event-top.c:360: internal-error: double prompt A problem internal to GDB has been detected, further debugging may prove unreliable. While the main UI was waiting for "start" to finish, gdb kepts pumping events, including the input fd of the extra console. The problem is that stdin_event_handler doesn't restore the current UI back to what it was, assuming that it's only ever called from the top level event loop. However, in this case, it's being called from the nested event loop from within maybe_wait_sync_command_done. When finally the "start" command is done, we reach the code that prints the prompt in the main UI, just before starting the main event loop. Since now the current UI is pointing at the extra console (by mistake), we find ourselves printing a double prompt on the extra console. This is caught by the assertion that fails, as shown above. Since other event handlers also don't restore the UI (e.g., signal event handlers), I think it's better if whatever is pumping events to take care to restore the UI, if it cares. That's what this patch does. New test included. gdb/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * top.c (wait_sync_command_done): Don't assume current_ui doesn't change across events. Restore the current UI before returning. (gdb_readline_wrapper): Restore the current UI before returning. gdb/testsuite/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * gdb.base/new-ui-pending-input.c: New file. * gdb.base/new-ui-pending-input.exp: New file. * gdb.exp (clear_gdb_spawn_id): New procedure. (with_spawn_id): Check whether gdb_spawn_id exists before referencing it. If gdb_spawn_id didn't exist on entry, clear it on exit.
2016-09-07 00:29:25 +02:00
if (ui->prompt_state != PROMPT_BLOCKED)
Merge async and sync code paths some more This patch makes the execution control code use largely the same mechanisms in both sync- and async-capable targets. This means using continuations and use the event loop to react to target events on sync targets as well. The trick is to immediately mark infrun's event loop source after resume instead of calling wait_for_inferior. Then fetch_inferior_event is adjusted to do a blocking wait on sync targets. Tested on x86_64 Fedora 20, native and gdbserver, with and without "maint set target-async off". gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * breakpoint.c (bpstat_do_actions_1, until_break_command): Don't check whether the target can async. * inf-loop.c (inferior_event_handler): Only call target_async if the target can async. * infcall.c: Include top.h and interps.h. (run_inferior_call): For the interpreter to sync mode while running the infcall. Call wait_sync_command_done instead of wait_for_inferior plus normal_stop. * infcmd.c (prepare_execution_command): Don't check whether the target can async when running in the foreground. (step_1): Delete synchronous case handling. (step_once): Always install a continuation, even in sync mode. (until_next_command, finish_forward): Don't check whether the target can async. (attach_command_post_wait, notice_new_inferior): Always install a continuation, even in sync mode. * infrun.c (mark_infrun_async_event_handler): New function. (proceed): In sync mode, mark infrun's event source instead of waiting for events here. (fetch_inferior_event): If the target can't async, do a blocking wait. (prepare_to_wait): In sync mode, mark infrun's event source. (infrun_async_inferior_event_handler): No longer bail out if the target can't async. * infrun.h (mark_infrun_async_event_handler): New declaration. * linux-nat.c (linux_nat_wait_1): Remove calls to set_sigint_trap/clear_sigint_trap. (linux_nat_terminal_inferior): No longer check whether the target can async. * mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify comment. (mi_execute_command_input_handler): No longer check whether the target is async. Update and simplify comment. * target.c (default_target_wait): New function. * target.h (struct target_ops) <to_wait>: Now defaults to default_target_wait. (default_target_wait): Declare. * top.c (wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... this. * top.h (wait_sync_command_done): Declare. * target-delegates.c: Regenerate.
2015-09-09 19:23:23 +02:00
break;
}
/* See top.h. */
gdb/17347 - Regression: GDB stopped on run with attached process Doing: gdb --pid=PID -ex run Results in GDB getting a SIGTTIN, and thus ending stopped. That's usually indicative of a missing target_terminal_ours call. E.g., from the PR: $ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run [1] 28263 [1] Killed sleep 1h [2]+ Stopped gdb -batch sleep $p -ex run The workaround is doing: gdb -ex "attach $PID" -ex "run" instead of gdb [-p] $PID -ex "run" With the former, gdb waits for the attach command to complete before moving on to the "run" command, because the interpreter is in sync mode at this point, within execute_command. But for the latter, attach_command is called directly from captured_main, and thus misses that waiting. IOW, "run" is running before the attach continuation has run, before the program stops and attach completes. The broken terminal settings are just one symptom of that. Any command that queries or requires input results in the same. The fix is to wait in catch_command_errors (which is specific to main.c nowadays), just like we wait in execute_command. gdb/ChangeLog: 2014-09-11 Pedro Alves <palves@redhat.com> PR gdb/17347 * main.c: Include "infrun.h". (catch_command_errors, catch_command_errors_const): Wait for the foreground command to complete. * top.c (maybe_wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... here. * top.h (maybe_wait_sync_command_done): New declaration. gdb/testsuite/ChangeLog: 2014-09-11 Pedro Alves <palves@redhat.com> PR gdb/17347 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure. * gdb.base/attach.exp (test_command_line_attach_run): New procedure. (top level): Call it.
2014-09-11 14:04:15 +02:00
void
maybe_wait_sync_command_done (int was_sync)
{
/* If the interpreter is in sync mode (we're running a user
command's list, running command hooks or similars), and we
just ran a synchronous command that started the target, wait
for that command to end. */
Replace the sync_execution global with a new enum prompt_state tristate When sync_execution (a boolean) is true, it means we're running a foreground command -- we hide the prompt stop listening to input, give the inferior the terminal, then go to the event loop waiting for the target to stop. With multiple independent UIs, we need to track whether each UI is synchronously blocked waiting for the target. IOW, if you do "continue" in one console, that console stops accepting commands, but you should still be free to type other commands in the others consoles. Just simply making sync_execution be per-UI alone not sufficient, because of this in fetch_inferior_event: /* If the inferior was in sync execution mode, and now isn't, restore the prompt (a synchronous execution command has finished, and we're ready for input). */ if (current_ui->async && was_sync && !sync_execution) observer_notify_sync_execution_done (); We'd have to record at entry the "was_sync" state for each UI, not just of the current UI. This patch instead replaces the sync_execution flag by a per-UI tristate flag indicating the command line prompt state: enum prompt_state { /* The command line is blocked simulating synchronous execution. This is used to implement the foreground execution commands ('run', 'continue', etc.). We won't display the prompt and accept further commands until the execution is actually over. */ PROMPT_BLOCKED, /* The command finished; display the prompt before returning back to the top level. */ PROMPT_NEEDED, /* We've displayed the prompt already, ready for input. */ PROMPTED, ; I think the end result is _much_ clearer than the current code, and, it addresses the original motivation too. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * annotate.c: Include top.h. (async_background_execution_p): Delete. (print_value_flags): Check the UI's prompt state rather then async_background_execution_p. * event-loop.c (start_event_loop): Set the prompt state to PROMPT_NEEDED. * event-top.c (display_gdb_prompt, async_enable_stdin) (async_disable_stdin): Check the current UI's prompt state instead of the sync_execution global. (command_line_handler): Set the prompt state to PROMPT_NEEDED before running a command, and display the prompt if still needed afterwards. * infcall.c (struct call_thread_fsm) <waiting_ui>: New field. (new_call_thread_fsm): New parameter 'waiting_ui'. Store it. (call_thread_fsm_should_stop): Set the prompt state to PROMPT_NEEDED. (run_inferior_call): Adjust to temporarily set the prompt state to PROMPT_BLOCKED instead of using the sync_execution global. (call_function_by_hand_dummy): Pass the current UI to new_call_thread_fsm. * infcmd.c: Include top.h. (continue_1): Check the current UI's prompt state instead of the sync_execution global. (continue_command): Validate global execution state before calling prepare_execution_command. (step_1): Call all_uis_check_sync_execution_done. (attach_post_wait): Don't call async_enable_stdin here. Remove reference to sync_execution. * infrun.c (sync_execution): Delete global. (follow_fork_inferior) (reinstall_readline_callback_handler_cleanup): Check the current UI's prompt state instead of the sync_execution global. (check_curr_ui_sync_execution_done) (all_uis_check_sync_execution_done): New functions. (fetch_inferior_event): Call all_uis_check_sync_execution_done instead of trying to determine whether the global sync execution changed. (handle_no_resumed): Check the prompt state of all UIs. (normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED UIs. Emit the "Switching to" notification to all UIs. Enable stdin in all UIs. * infrun.h (sync_execution): Delete. (all_uis_check_sync_execution_done): Declare. * main.c (captured_command_loop): Don't call interp_pre_command_loop if the prompt is blocked. (catch_command_errors, catch_command_errors_const): Adjust. (captured_main): Set the initial prompt state to PROMPT_NEEDED. * mi/mi-interp.c (display_mi_prompt): Set the prompt state to PROMPTED. (mi_interpreter_resume): Don't clear sync_execution. Remove hack comment. (mi_execute_command_input_handler): Set the prompt state to PROMPT_NEEDED before executing the command, and only display the prompt if the prompt state is PROMPT_NEEDED afterwards. (mi_on_resume_1): Adjust to check the prompt state. * target.c (target_terminal_inferior): Adjust to check the prompt state. * top.c (wait_sync_command_done, maybe_wait_sync_command_done) (execute_command): Check the current UI's prompt state instead of sync_execution. * top.h (enum prompt_state): New. (struct ui) <prompt_state>: New field. (ALL_UIS): New macro.
2016-06-21 02:11:51 +02:00
if (!current_ui->async
&& !was_sync
&& current_ui->prompt_state == PROMPT_BLOCKED)
Merge async and sync code paths some more This patch makes the execution control code use largely the same mechanisms in both sync- and async-capable targets. This means using continuations and use the event loop to react to target events on sync targets as well. The trick is to immediately mark infrun's event loop source after resume instead of calling wait_for_inferior. Then fetch_inferior_event is adjusted to do a blocking wait on sync targets. Tested on x86_64 Fedora 20, native and gdbserver, with and without "maint set target-async off". gdb/ChangeLog: 2015-09-09 Pedro Alves <palves@redhat.com> * breakpoint.c (bpstat_do_actions_1, until_break_command): Don't check whether the target can async. * inf-loop.c (inferior_event_handler): Only call target_async if the target can async. * infcall.c: Include top.h and interps.h. (run_inferior_call): For the interpreter to sync mode while running the infcall. Call wait_sync_command_done instead of wait_for_inferior plus normal_stop. * infcmd.c (prepare_execution_command): Don't check whether the target can async when running in the foreground. (step_1): Delete synchronous case handling. (step_once): Always install a continuation, even in sync mode. (until_next_command, finish_forward): Don't check whether the target can async. (attach_command_post_wait, notice_new_inferior): Always install a continuation, even in sync mode. * infrun.c (mark_infrun_async_event_handler): New function. (proceed): In sync mode, mark infrun's event source instead of waiting for events here. (fetch_inferior_event): If the target can't async, do a blocking wait. (prepare_to_wait): In sync mode, mark infrun's event source. (infrun_async_inferior_event_handler): No longer bail out if the target can't async. * infrun.h (mark_infrun_async_event_handler): New declaration. * linux-nat.c (linux_nat_wait_1): Remove calls to set_sigint_trap/clear_sigint_trap. (linux_nat_terminal_inferior): No longer check whether the target can async. * mi/mi-interp.c (mi_on_sync_execution_done): Update and simplify comment. (mi_execute_command_input_handler): No longer check whether the target is async. Update and simplify comment. * target.c (default_target_wait): New function. * target.h (struct target_ops) <to_wait>: Now defaults to default_target_wait. (default_target_wait): Declare. * top.c (wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... this. * top.h (wait_sync_command_done): Declare. * target-delegates.c: Regenerate.
2015-09-09 19:23:23 +02:00
wait_sync_command_done ();
gdb/17347 - Regression: GDB stopped on run with attached process Doing: gdb --pid=PID -ex run Results in GDB getting a SIGTTIN, and thus ending stopped. That's usually indicative of a missing target_terminal_ours call. E.g., from the PR: $ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run [1] 28263 [1] Killed sleep 1h [2]+ Stopped gdb -batch sleep $p -ex run The workaround is doing: gdb -ex "attach $PID" -ex "run" instead of gdb [-p] $PID -ex "run" With the former, gdb waits for the attach command to complete before moving on to the "run" command, because the interpreter is in sync mode at this point, within execute_command. But for the latter, attach_command is called directly from captured_main, and thus misses that waiting. IOW, "run" is running before the attach continuation has run, before the program stops and attach completes. The broken terminal settings are just one symptom of that. Any command that queries or requires input results in the same. The fix is to wait in catch_command_errors (which is specific to main.c nowadays), just like we wait in execute_command. gdb/ChangeLog: 2014-09-11 Pedro Alves <palves@redhat.com> PR gdb/17347 * main.c: Include "infrun.h". (catch_command_errors, catch_command_errors_const): Wait for the foreground command to complete. * top.c (maybe_wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... here. * top.h (maybe_wait_sync_command_done): New declaration. gdb/testsuite/ChangeLog: 2014-09-11 Pedro Alves <palves@redhat.com> PR gdb/17347 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure. * gdb.base/attach.exp (test_command_line_attach_run): New procedure. (top level): Call it.
2014-09-11 14:04:15 +02:00
}
/* See command.h. */
void
set_repeat_arguments (const char *args)
{
repeat_arguments = args;
}
/* Execute the line P as a command, in the current user context.
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
Pass FROM_TTY as second argument to the defining function. */
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
void
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
execute_command (const char *p, int from_tty)
{
struct cmd_list_element *c;
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
const char *line;
const char *cmd_start = p;
Implement TARGET_OBJECT_STACK_MEMORY. * NEWS: Add note on new "set stack-cache" option. * corefile.c (read_stack): New function. * dcache.c (dcache_struct): New member ptid. (dcache_enable_p): Mark as obsolete. (show_dcache_enabled_p): Flag option as deprecated. (dcache_invalidate): Update ptid. (dcache_invalidate_line): New function. (dcache_read_line): No longer check cacheable attribute, stack accesses get cached despite attribute. (dcache_init): Set ptid. (dcache_xfer_memory): Flush cache if from different ptid than before. Update cache after write. (dcache_update): New function. (dcache_info): Report ptid. (_initialize_dcache): Update text for `remotecache' to indicate it is obsolete. * dcache.h (dcache_update): Declare. * dwarf2loc.c (dwarf2_evaluate_loc_desc): Mark values on stack with set_value_stack. * frame-unwind.c (frame_unwind_got_memory): Ditto. * gdbcore.h (read_stack): Declare. * memattr.c (mem_enable_command): Call target_dcache_invalidate instead of dcache_invalidate. (mem_disable_command, mem_delete_command): Ditto. * target.c (stack_cache_enabled_p_1): New static global. (stack_cache_enabled_p): New static global. (set_stack_cache_enabled_p): New function. (show_stack_cache_enabled_p): New function. (target_dcache): Make static. (target_dcache_invalidate): New function. (target_load, target_resume): Call target_dcache_invalidate instead of dcache_invalidate. (memory_xfer_partial): New arg object, all callers updated. Check for existing inferior before calling dcache routines. When writing non-TARGET_OBJECT_STACK_MEMORY, notify dcache. (target_xfer_partial): Call memory_xfer_partial for TARGET_OBJECT_STACK_MEMORY. (target_read_stack): New function. (initialize_targets): Install new option `stack-cache'. * target.h: Remove #include of dcache.h. (enum target_object): New value TARGET_OBJECT_STACK_MEMORY. (target_dcache): Delete. (target_dcache_invalidate): Declare. (target_read_stack): Declare. * top.c (prepare_execute_command): New function. (execute_command): Call prepare_execute_command instead of free_all_values. * top.h (prepare_execute_command): Declare. * valops.c (get_value_at): New function. (value_at): Guts moved to get_value_at. (value_at_lazy): Similarly. (value_fetch_lazy): Call read_stack for stack values. * value.c (struct value): New member `stack'. (value_stack, set_value_stack): New functions. * value.h (value_stack, set_value_stack): Declare. * mi/mi-main.c (mi_cmd_execute): Call prepare_execute_command instead of free_all_values. doc/ * gdb.texinfo (Caching Data of Remote Targets): Update text. Mark `set/show remotecache' options as obsolete. Document new `set/show stack-cache' option. Update text for `info dcache'.
2009-08-31 22:18:46 +02:00
auto cleanup_if_error = make_scope_exit (bpstat_clear_actions);
scoped_value_mark cleanup = prepare_execute_command ();
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* This can happen when command_line_input hits end of file. */
if (p == NULL)
{
cleanup_if_error.release ();
return;
}
target_log_command (p);
2000-02-03 05:14:45 +01:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
while (*p == ' ' || *p == '\t')
p++;
if (*p)
2000-02-03 05:14:45 +01:00
{
Constify strings in tracepoint.c, lookup_cmd and the completers. This is sort of a continuation of Keith's parse_exp_1 constification patch. It started out by undoing these bits: @@ -754,9 +754,12 @@ validate_actionline (char **line, struct tmp_p = p; for (loc = t->base.loc; loc; loc = loc->next) { - p = tmp_p; - exp = parse_exp_1 (&p, loc->address, + const char *q; + + q = tmp_p; + exp = parse_exp_1 (&q, loc->address, block_for_pc (loc->address), 1); + p = (char *) q; and progressively making more things const upwards, fixing fallout, rinse repeat, until GDB built again (--enable-targets=all). That ended up constifying lookup_cmd/add_cmd and (lots of) friends, and the completers. I didn't try to constify the command hooks themselves, because I know upfront there are commands that write to the command string argument, and I think I managed to stop at a nice non-hacky split point already. I think the only non-really-super-obvious changes are tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions. The rest is just mostly about 'char *' => 'const char *', 'char **'=> 'const char **', and the occasional (e.g., deprecated_cmd_warning) case of 'char **'=> 'const char *', where/when I noticed that nothing actually cares about the pointer to pointer output. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-03-13 Pedro Alves <palves@redhat.com> * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make fields const. (ada_make_symbol_completion_list): Make "text0" parameter const. * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const. * breakpoint.c (condition_completer): Make "text" and "word" parameters const. Adjust. (check_tracepoint_command): Adjust to validate_actionline prototype change. (catch_syscall_completer): Make "text" and "word" parameters const. * cli/cli-cmds.c (show_user): Make "comname" local const. (valid_command_p): Make "command" parameter const. (alias_command): Make "alias_prefix" and "command_prefix" locals const. * cli/cli-decode.c (add_cmd): Make "name" parameter const. (add_alias_cmd): Make "name" and "oldname" parameters const. Adjust. No longer make copy of OLDNAME. (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd) (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd) (delete_cmd, add_info, add_info_alias, add_com, add_com_alias): Make "name" parameter const. (help_cmd): Rename "command" parameter to "arg". New const local "command". (find_cmd): Make "command" parameter const. (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to deprecated_cmd_warning prototype change. (undef_cmd_error): Make "cmdtype" parameter const. (lookup_cmd): Make "line" parameter const. (deprecated_cmd_warning): Change type of "text" parameter to pointer to const char, from pointer to pointer to char. Adjust. (lookup_cmd_composition): Make "text" parameter const. (complete_on_cmdlist, complete_on_enum): Make "text" and "word" parameters const. * cli/cli-decode.h (struct cmd_list_element) <name>: Make field const. * cli/cli-script.c (validate_comname): Make "tem" local const. (define_command): New const local "tem_c". Use it in calls to lookup_cmd. (document_command): Make "tem" and "comfull" locals const. (show_user_1): Make "prefix" and "name" parameters const. * cli-script.h (show_user_1): Make "prefix" and "name" parameters const. * command.h (add_cmd, add_alias_cmd, add_prefix_cmd) (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1) (deprecated_cmd_warning, lookup_cmd_composition, add_com) (add_com_alias, add_info, add_info_alias, complete_on_cmdlist) (complete_on_enum, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Change prototypes, constifying strings. * completer.c (noop_completer, filename_completer): Make "text" and "prefix" parameters const. (location_completer, expression_completer) (complete_line_internal): Make "text" and "prefix" parameters const and adjust. (command_completer, signal_completer): Make "text" and "prefix" parameters const. * completer.h (noop_completer, filename_completer) (expression_completer, location_completer, command_completer) (signal_completer): Change prototypes. * corefile.c (complete_set_gnutarget): Make "text" and "word" parameters const. * cp-abi.c (cp_abi_completer): Likewise. * expression.h (parse_expression_for_completion): Change prototype. * f-lang.c (f_make_symbol_completion_list): Make "text" and "word" parameters const. * infcmd.c (_initialize_infcmd): Make "cmd_name" local const. * infrun.c (handle_completer): Make "text" and "word" parameters const. * interps.c (interpreter_completer): Make "text" and "word" parameters const. * language.h (struct language_defn) <la_make_symbol_completion_list>: Make "text" and "word" parameters const. * parse.c (parse_exp_1): Move const hack to parse_exp_in_context. (parse_exp_in_context): Rename to ... (parse_exp_in_context_1): ... this. (parse_exp_in_context): Reimplement, with const hack from parse_exp_1. (parse_expression_for_completion): Make "string" parameter const. * printcmd.c (decode_format): Make "string_ptr" parameter pointer to pointer to const char. Adjust. (print_command_1): Make "exp" parameter const. (output_command): Rename to ... (output_command_const): ... this. Make "exp" parameter const. (output_command): Reimplement. (x_command): Adjust. (display_command): Rename "exp" parameter to "arg". New "exp" local, const version of "arg". * python/py-auto-load.c (gdbpy_initialize_auto_load): Make "cmd_name" local const. * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree call. (cmdpy_completer): Make "text" and "word" parameters const. (gdbpy_parse_command_name): Make "prefix_text2" local const. * python/py-param.c (add_setshow_generic): Make "tmp_name" local const. * remote.c (_initialize_remote): Make "cmd_name" local const. * symtab.c (language_search_unquoted_string): Make "text" and "p" parameters const. Adjust. (completion_list_add_fields): Make "sym_text", "text" and "word" parameters const. (struct add_name_data) <sym_text, text, word>: Make fields const. (default_make_symbol_completion_list_break_on): Make "text" and "word" parameters const. Adjust locals. (default_make_symbol_completion_list) (make_symbol_completion_list, make_symbol_completion_type) (make_symbol_completion_list_fn): Make "text" and "word" parameters const. (make_file_symbol_completion_list): Make "text", "word" and "srcfile" parameters const. Adjust locals. (add_filename_to_list): Make "text" and "word" parameters const. (struct add_partial_filename_data) <text, word>: Make fields const. (make_source_files_completion_list): Make "text" and "word" parameters const. * symtab.h (default_make_symbol_completion_list_break_on) (default_make_symbol_completion_list, make_symbol_completion_list) (make_symbol_completion_type enum type_code) (make_symbol_completion_list_fn make_file_symbol_completion_list) (make_source_files_completion_list): Change prototype. * top.c (execute_command): Adjust to pass pointer to pointer to const char to lookup_cmd, and to deprecated_cmd_warning prototype change. (set_verbose): Make "cmdname" local const. * tracepoint.c (decode_agent_options): Make "exp" parameter const, and adjust. (validate_actionline): Make "line" parameter a pointer to const char, and adjust. (encode_actions_1): Make "action_exp" local const, and adjust. (encode_actions): Adjust. (replace_comma): Delete. (trace_dump_actions): Make "action_exp" and "next_comma" locals const, and adjust. Don't frob the action string while splitting it at commas. Instead, make a copy of each split substring in turn. (trace_dump_command): Adjust to validate_actionline prototype change. * tracepoint.h (decode_agent_options, decode_agent_options) (encode_actions, validate_actionline): Change prototypes. * valprint.h (output_command): Delete declaration. (output_command_const): Declare. * value.c (function_destroyer): Cast const away in xfree call.
2013-03-13 19:34:55 +01:00
const char *cmd = p;
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
const char *arg;
Replace the sync_execution global with a new enum prompt_state tristate When sync_execution (a boolean) is true, it means we're running a foreground command -- we hide the prompt stop listening to input, give the inferior the terminal, then go to the event loop waiting for the target to stop. With multiple independent UIs, we need to track whether each UI is synchronously blocked waiting for the target. IOW, if you do "continue" in one console, that console stops accepting commands, but you should still be free to type other commands in the others consoles. Just simply making sync_execution be per-UI alone not sufficient, because of this in fetch_inferior_event: /* If the inferior was in sync execution mode, and now isn't, restore the prompt (a synchronous execution command has finished, and we're ready for input). */ if (current_ui->async && was_sync && !sync_execution) observer_notify_sync_execution_done (); We'd have to record at entry the "was_sync" state for each UI, not just of the current UI. This patch instead replaces the sync_execution flag by a per-UI tristate flag indicating the command line prompt state: enum prompt_state { /* The command line is blocked simulating synchronous execution. This is used to implement the foreground execution commands ('run', 'continue', etc.). We won't display the prompt and accept further commands until the execution is actually over. */ PROMPT_BLOCKED, /* The command finished; display the prompt before returning back to the top level. */ PROMPT_NEEDED, /* We've displayed the prompt already, ready for input. */ PROMPTED, ; I think the end result is _much_ clearer than the current code, and, it addresses the original motivation too. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * annotate.c: Include top.h. (async_background_execution_p): Delete. (print_value_flags): Check the UI's prompt state rather then async_background_execution_p. * event-loop.c (start_event_loop): Set the prompt state to PROMPT_NEEDED. * event-top.c (display_gdb_prompt, async_enable_stdin) (async_disable_stdin): Check the current UI's prompt state instead of the sync_execution global. (command_line_handler): Set the prompt state to PROMPT_NEEDED before running a command, and display the prompt if still needed afterwards. * infcall.c (struct call_thread_fsm) <waiting_ui>: New field. (new_call_thread_fsm): New parameter 'waiting_ui'. Store it. (call_thread_fsm_should_stop): Set the prompt state to PROMPT_NEEDED. (run_inferior_call): Adjust to temporarily set the prompt state to PROMPT_BLOCKED instead of using the sync_execution global. (call_function_by_hand_dummy): Pass the current UI to new_call_thread_fsm. * infcmd.c: Include top.h. (continue_1): Check the current UI's prompt state instead of the sync_execution global. (continue_command): Validate global execution state before calling prepare_execution_command. (step_1): Call all_uis_check_sync_execution_done. (attach_post_wait): Don't call async_enable_stdin here. Remove reference to sync_execution. * infrun.c (sync_execution): Delete global. (follow_fork_inferior) (reinstall_readline_callback_handler_cleanup): Check the current UI's prompt state instead of the sync_execution global. (check_curr_ui_sync_execution_done) (all_uis_check_sync_execution_done): New functions. (fetch_inferior_event): Call all_uis_check_sync_execution_done instead of trying to determine whether the global sync execution changed. (handle_no_resumed): Check the prompt state of all UIs. (normal_stop): Emit the no unwait-for even to all PROMPT_BLOCKED UIs. Emit the "Switching to" notification to all UIs. Enable stdin in all UIs. * infrun.h (sync_execution): Delete. (all_uis_check_sync_execution_done): Declare. * main.c (captured_command_loop): Don't call interp_pre_command_loop if the prompt is blocked. (catch_command_errors, catch_command_errors_const): Adjust. (captured_main): Set the initial prompt state to PROMPT_NEEDED. * mi/mi-interp.c (display_mi_prompt): Set the prompt state to PROMPTED. (mi_interpreter_resume): Don't clear sync_execution. Remove hack comment. (mi_execute_command_input_handler): Set the prompt state to PROMPT_NEEDED before executing the command, and only display the prompt if the prompt state is PROMPT_NEEDED afterwards. (mi_on_resume_1): Adjust to check the prompt state. * target.c (target_terminal_inferior): Adjust to check the prompt state. * top.c (wait_sync_command_done, maybe_wait_sync_command_done) (execute_command): Check the current UI's prompt state instead of sync_execution. * top.h (enum prompt_state): New. (struct ui) <prompt_state>: New field. (ALL_UIS): New macro.
2016-06-21 02:11:51 +02:00
int was_sync = current_ui->prompt_state == PROMPT_BLOCKED;
Fix py-finish-breakpoint.exp with target async. With target async enabled, py-finish-breakpoint.exp triggers an assertion failure. The failure occurs because execute_command re-enters the event loop in some circumstances, and in this case resets the sync_execution flag. Then later GDB reaches this assertion in normal_stop: gdb_assert (sync_execution || !target_can_async_p ()); In detail: #1 - A synchronous execution command is run. sync_execution is set. #2 - A python breakpoint is hit (TARGET_WAITKIND_STOPPED), and the corresponding Python breakpoint's stop method is executed. When and while python commands are executed, interpreter_async is forced to 0. #3 - The Python stop method happens to execute a not-execution-related gdb command. In this case, "where 1". #4 - Seeing that sync_execution is set, execute_command nests a new event loop (although that wasn't necessary; this is the problem). #5 - The linux-nat target's pipe in the event loop happens to be marked. That's normal, due to this in linux_nat_wait: /* If we requested any event, and something came out, assume there may be more. If we requested a specific lwp or process, also assume there may be more. */ The nested event loop thus immediately wakes up and calls target_wait. No thread is actually executing in the inferior, so the target returns TARGET_WAITKIND_NO_RESUMED. #6 - normal_stop is reached. GDB prints "No unwaited-for children left.", and resets the sync_execution flag (IOW, there are no resumed threads left, so the synchronous command is considered completed.) This is already bogus. We were handling a breakpoint! #7 - the nested event loop unwinds/ends. GDB is now back to handling the python stop method (TARGET_WAITKIND_STOPPED), which decides the breakpoint should stop. normal_stop is called for this event. However, normal_stop actually works with the _last_ reported target status: void normal_stop (void) { struct target_waitstatus last; ptid_t last_ptid; struct cleanup *old_chain = make_cleanup (null_cleanup, NULL); ... get_last_target_status (&last_ptid, &last); ... if (last.kind == TARGET_WAITKIND_NO_RESUMED) { gdb_assert (sync_execution || !target_can_async_p ()); target_terminal_ours_for_output (); printf_filtered (_("No unwaited-for children left.\n")); } And due to the nesting in execute command, the last event is now TARGET_WAITKIND_NO_RESUMED, not the actual breakpoint event being handled. This could be seen to be broken in itself, but we can leave fixing that for another pass. The assertion is reached, and fails. execute_command has a comment explaining when it should synchronously wait for events: /* If the interpreter is in sync mode (we're running a user command's list, running command hooks or similars), and we just ran a synchronous command that started the target, wait for that command to end. */ However, the code did not follow this comment -- it didn't check to see if the command actually started the target, just whether the target was executing a sync command at this point. This patch fixes the problem by noting whether the target was executing in sync_execution mode before running the command, and then augmenting the condition to test this as well. 2014-03-20 Tom Tromey <tromey@redhat.com> PR gdb/14135 * top.c (execute_command): Only dispatch events if the command started the target.
2014-03-04 19:32:52 +01:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
line = p;
2000-02-03 05:14:45 +01:00
2006-07-21 16:46:56 +02:00
/* If trace-commands is set then this will print this command. */
print_command_trace ("%s", p);
2006-07-21 16:46:56 +02:00
Constify strings in tracepoint.c, lookup_cmd and the completers. This is sort of a continuation of Keith's parse_exp_1 constification patch. It started out by undoing these bits: @@ -754,9 +754,12 @@ validate_actionline (char **line, struct tmp_p = p; for (loc = t->base.loc; loc; loc = loc->next) { - p = tmp_p; - exp = parse_exp_1 (&p, loc->address, + const char *q; + + q = tmp_p; + exp = parse_exp_1 (&q, loc->address, block_for_pc (loc->address), 1); + p = (char *) q; and progressively making more things const upwards, fixing fallout, rinse repeat, until GDB built again (--enable-targets=all). That ended up constifying lookup_cmd/add_cmd and (lots of) friends, and the completers. I didn't try to constify the command hooks themselves, because I know upfront there are commands that write to the command string argument, and I think I managed to stop at a nice non-hacky split point already. I think the only non-really-super-obvious changes are tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions. The rest is just mostly about 'char *' => 'const char *', 'char **'=> 'const char **', and the occasional (e.g., deprecated_cmd_warning) case of 'char **'=> 'const char *', where/when I noticed that nothing actually cares about the pointer to pointer output. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-03-13 Pedro Alves <palves@redhat.com> * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make fields const. (ada_make_symbol_completion_list): Make "text0" parameter const. * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const. * breakpoint.c (condition_completer): Make "text" and "word" parameters const. Adjust. (check_tracepoint_command): Adjust to validate_actionline prototype change. (catch_syscall_completer): Make "text" and "word" parameters const. * cli/cli-cmds.c (show_user): Make "comname" local const. (valid_command_p): Make "command" parameter const. (alias_command): Make "alias_prefix" and "command_prefix" locals const. * cli/cli-decode.c (add_cmd): Make "name" parameter const. (add_alias_cmd): Make "name" and "oldname" parameters const. Adjust. No longer make copy of OLDNAME. (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd) (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd) (delete_cmd, add_info, add_info_alias, add_com, add_com_alias): Make "name" parameter const. (help_cmd): Rename "command" parameter to "arg". New const local "command". (find_cmd): Make "command" parameter const. (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to deprecated_cmd_warning prototype change. (undef_cmd_error): Make "cmdtype" parameter const. (lookup_cmd): Make "line" parameter const. (deprecated_cmd_warning): Change type of "text" parameter to pointer to const char, from pointer to pointer to char. Adjust. (lookup_cmd_composition): Make "text" parameter const. (complete_on_cmdlist, complete_on_enum): Make "text" and "word" parameters const. * cli/cli-decode.h (struct cmd_list_element) <name>: Make field const. * cli/cli-script.c (validate_comname): Make "tem" local const. (define_command): New const local "tem_c". Use it in calls to lookup_cmd. (document_command): Make "tem" and "comfull" locals const. (show_user_1): Make "prefix" and "name" parameters const. * cli-script.h (show_user_1): Make "prefix" and "name" parameters const. * command.h (add_cmd, add_alias_cmd, add_prefix_cmd) (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1) (deprecated_cmd_warning, lookup_cmd_composition, add_com) (add_com_alias, add_info, add_info_alias, complete_on_cmdlist) (complete_on_enum, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Change prototypes, constifying strings. * completer.c (noop_completer, filename_completer): Make "text" and "prefix" parameters const. (location_completer, expression_completer) (complete_line_internal): Make "text" and "prefix" parameters const and adjust. (command_completer, signal_completer): Make "text" and "prefix" parameters const. * completer.h (noop_completer, filename_completer) (expression_completer, location_completer, command_completer) (signal_completer): Change prototypes. * corefile.c (complete_set_gnutarget): Make "text" and "word" parameters const. * cp-abi.c (cp_abi_completer): Likewise. * expression.h (parse_expression_for_completion): Change prototype. * f-lang.c (f_make_symbol_completion_list): Make "text" and "word" parameters const. * infcmd.c (_initialize_infcmd): Make "cmd_name" local const. * infrun.c (handle_completer): Make "text" and "word" parameters const. * interps.c (interpreter_completer): Make "text" and "word" parameters const. * language.h (struct language_defn) <la_make_symbol_completion_list>: Make "text" and "word" parameters const. * parse.c (parse_exp_1): Move const hack to parse_exp_in_context. (parse_exp_in_context): Rename to ... (parse_exp_in_context_1): ... this. (parse_exp_in_context): Reimplement, with const hack from parse_exp_1. (parse_expression_for_completion): Make "string" parameter const. * printcmd.c (decode_format): Make "string_ptr" parameter pointer to pointer to const char. Adjust. (print_command_1): Make "exp" parameter const. (output_command): Rename to ... (output_command_const): ... this. Make "exp" parameter const. (output_command): Reimplement. (x_command): Adjust. (display_command): Rename "exp" parameter to "arg". New "exp" local, const version of "arg". * python/py-auto-load.c (gdbpy_initialize_auto_load): Make "cmd_name" local const. * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree call. (cmdpy_completer): Make "text" and "word" parameters const. (gdbpy_parse_command_name): Make "prefix_text2" local const. * python/py-param.c (add_setshow_generic): Make "tmp_name" local const. * remote.c (_initialize_remote): Make "cmd_name" local const. * symtab.c (language_search_unquoted_string): Make "text" and "p" parameters const. Adjust. (completion_list_add_fields): Make "sym_text", "text" and "word" parameters const. (struct add_name_data) <sym_text, text, word>: Make fields const. (default_make_symbol_completion_list_break_on): Make "text" and "word" parameters const. Adjust locals. (default_make_symbol_completion_list) (make_symbol_completion_list, make_symbol_completion_type) (make_symbol_completion_list_fn): Make "text" and "word" parameters const. (make_file_symbol_completion_list): Make "text", "word" and "srcfile" parameters const. Adjust locals. (add_filename_to_list): Make "text" and "word" parameters const. (struct add_partial_filename_data) <text, word>: Make fields const. (make_source_files_completion_list): Make "text" and "word" parameters const. * symtab.h (default_make_symbol_completion_list_break_on) (default_make_symbol_completion_list, make_symbol_completion_list) (make_symbol_completion_type enum type_code) (make_symbol_completion_list_fn make_file_symbol_completion_list) (make_source_files_completion_list): Change prototype. * top.c (execute_command): Adjust to pass pointer to pointer to const char to lookup_cmd, and to deprecated_cmd_warning prototype change. (set_verbose): Make "cmdname" local const. * tracepoint.c (decode_agent_options): Make "exp" parameter const, and adjust. (validate_actionline): Make "line" parameter a pointer to const char, and adjust. (encode_actions_1): Make "action_exp" local const, and adjust. (encode_actions): Adjust. (replace_comma): Delete. (trace_dump_actions): Make "action_exp" and "next_comma" locals const, and adjust. Don't frob the action string while splitting it at commas. Instead, make a copy of each split substring in turn. (trace_dump_command): Adjust to validate_actionline prototype change. * tracepoint.h (decode_agent_options, decode_agent_options) (encode_actions, validate_actionline): Change prototypes. * valprint.h (output_command): Delete declaration. (output_command_const): Declare. * value.c (function_destroyer): Cast const away in xfree call.
2013-03-13 19:34:55 +01:00
c = lookup_cmd (&cmd, cmdlist, "", 0, 1);
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
p = cmd;
2000-02-03 05:14:45 +01:00
scoped_restore save_repeat_args
= make_scoped_restore (&repeat_arguments, nullptr);
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
const char *args_pointer = p;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* Pass null arg rather than an empty one. */
arg = *p ? p : 0;
2000-02-03 05:14:45 +01:00
* cli/cli-decode.c (do_cfunc, set_cmd_cfunc): New functions. (do_sfunc, set_cmd_sfunc): New functions. * command.h (struct cmd_list_element): Add field func. * cli/cli-decode.h (struct cmd_list_element): Ditto. * command.h (set_cmd_sfunc, set_cmd_cfunc): Declare. * cli/cli-decode.h: Ditto. * cli/cli-decode.c (help_cmd): Test for func not cfunc/sfunc. (help_all, help_cmd_list): Ditto. (find_cmd, complete_on_cmdlist): Ditto. * top.c (execute_command): Ditto. * cli/cli-setshow.c (do_setshow_command): Call func instead of function.sfunc. * infcmd.c (notice_args_read): Fix function signature. * cli/cli-cmds.c (init_cli_cmds): Use set_cmd_sfunc. * cli/cli-decode.c (add_set_cmd): Ditto. * utils.c (initialize_utils): Ditto. * maint.c (_initialize_maint_cmds): Ditto. * infrun.c (_initialize_infrun): Ditto. * demangle.c (_initialize_demangler): Ditto. * remote.c (add_packet_config_cmd): Ditto. * mips-tdep.c (_initialize_mips_tdep): Ditto. * cris-tdep.c (_initialize_cris_tdep): Ditto. * proc-api.c (_initialize_proc_api): Ditto. * kod.c (_initialize_kod): Ditto. * valprint.c (_initialize_valprint): Ditto. * top.c (init_main): Ditto. * infcmd.c (_initialize_infcmd): Ditto. * corefile.c (_initialize_core): Ditto. * arm-tdep.c (_initialize_arm_tdep): Ditto. * arch-utils.c (initialize_current_architecture): Ditto. (_initialize_gdbarch_utils): Ditto. * alpha-tdep.c (_initialize_alpha_tdep): Ditto. * cli/cli-decode.c (add_cmd): Use set_cmd_cfunc. * wince.c (_initialize_inftarg): Ditto. * symfile.c (_initialize_symfile): Ditto. * mips-tdep.c (_initialize_mips_tdep): Ditto. * language.c (_initialize_language): Ditto. * arc-tdep.c (_initialize_arc_tdep): Ditto.
2002-02-05 05:37:23 +01:00
/* FIXME: cagney/2002-02-02: The c->type test is pretty dodgy
while the is_complete_command(cfunc) test is just plain
bogus. They should both be replaced by a test of the form
c->strip_trailing_white_space_p. */
/* NOTE: cagney/2002-02-02: The function.cfunc in the below
can't be replaced with func. This is because it is the
cfunc, and not the func, that has the value that the
is_complete_command hack is testing for. */
/* Clear off trailing whitespace, except for set and complete
command. */
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
std::string without_whitespace;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
if (arg
&& c->type != set_cmd
&& !is_complete_command (c))
2000-02-03 05:14:45 +01:00
{
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
const char *old_end = arg + strlen (arg) - 1;
p = old_end;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
while (p >= arg && (*p == ' ' || *p == '\t'))
p--;
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
if (p != old_end)
{
without_whitespace = std::string (arg, p + 1);
arg = without_whitespace.c_str ();
}
2000-02-03 05:14:45 +01:00
}
/* If this command has been pre-hooked, run the hook first. */
execute_cmd_pre_hook (c);
if (c->deprecated_warn_user)
Constify strings in tracepoint.c, lookup_cmd and the completers. This is sort of a continuation of Keith's parse_exp_1 constification patch. It started out by undoing these bits: @@ -754,9 +754,12 @@ validate_actionline (char **line, struct tmp_p = p; for (loc = t->base.loc; loc; loc = loc->next) { - p = tmp_p; - exp = parse_exp_1 (&p, loc->address, + const char *q; + + q = tmp_p; + exp = parse_exp_1 (&q, loc->address, block_for_pc (loc->address), 1); + p = (char *) q; and progressively making more things const upwards, fixing fallout, rinse repeat, until GDB built again (--enable-targets=all). That ended up constifying lookup_cmd/add_cmd and (lots of) friends, and the completers. I didn't try to constify the command hooks themselves, because I know upfront there are commands that write to the command string argument, and I think I managed to stop at a nice non-hacky split point already. I think the only non-really-super-obvious changes are tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions. The rest is just mostly about 'char *' => 'const char *', 'char **'=> 'const char **', and the occasional (e.g., deprecated_cmd_warning) case of 'char **'=> 'const char *', where/when I noticed that nothing actually cares about the pointer to pointer output. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-03-13 Pedro Alves <palves@redhat.com> * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make fields const. (ada_make_symbol_completion_list): Make "text0" parameter const. * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const. * breakpoint.c (condition_completer): Make "text" and "word" parameters const. Adjust. (check_tracepoint_command): Adjust to validate_actionline prototype change. (catch_syscall_completer): Make "text" and "word" parameters const. * cli/cli-cmds.c (show_user): Make "comname" local const. (valid_command_p): Make "command" parameter const. (alias_command): Make "alias_prefix" and "command_prefix" locals const. * cli/cli-decode.c (add_cmd): Make "name" parameter const. (add_alias_cmd): Make "name" and "oldname" parameters const. Adjust. No longer make copy of OLDNAME. (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd) (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd) (delete_cmd, add_info, add_info_alias, add_com, add_com_alias): Make "name" parameter const. (help_cmd): Rename "command" parameter to "arg". New const local "command". (find_cmd): Make "command" parameter const. (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to deprecated_cmd_warning prototype change. (undef_cmd_error): Make "cmdtype" parameter const. (lookup_cmd): Make "line" parameter const. (deprecated_cmd_warning): Change type of "text" parameter to pointer to const char, from pointer to pointer to char. Adjust. (lookup_cmd_composition): Make "text" parameter const. (complete_on_cmdlist, complete_on_enum): Make "text" and "word" parameters const. * cli/cli-decode.h (struct cmd_list_element) <name>: Make field const. * cli/cli-script.c (validate_comname): Make "tem" local const. (define_command): New const local "tem_c". Use it in calls to lookup_cmd. (document_command): Make "tem" and "comfull" locals const. (show_user_1): Make "prefix" and "name" parameters const. * cli-script.h (show_user_1): Make "prefix" and "name" parameters const. * command.h (add_cmd, add_alias_cmd, add_prefix_cmd) (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1) (deprecated_cmd_warning, lookup_cmd_composition, add_com) (add_com_alias, add_info, add_info_alias, complete_on_cmdlist) (complete_on_enum, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Change prototypes, constifying strings. * completer.c (noop_completer, filename_completer): Make "text" and "prefix" parameters const. (location_completer, expression_completer) (complete_line_internal): Make "text" and "prefix" parameters const and adjust. (command_completer, signal_completer): Make "text" and "prefix" parameters const. * completer.h (noop_completer, filename_completer) (expression_completer, location_completer, command_completer) (signal_completer): Change prototypes. * corefile.c (complete_set_gnutarget): Make "text" and "word" parameters const. * cp-abi.c (cp_abi_completer): Likewise. * expression.h (parse_expression_for_completion): Change prototype. * f-lang.c (f_make_symbol_completion_list): Make "text" and "word" parameters const. * infcmd.c (_initialize_infcmd): Make "cmd_name" local const. * infrun.c (handle_completer): Make "text" and "word" parameters const. * interps.c (interpreter_completer): Make "text" and "word" parameters const. * language.h (struct language_defn) <la_make_symbol_completion_list>: Make "text" and "word" parameters const. * parse.c (parse_exp_1): Move const hack to parse_exp_in_context. (parse_exp_in_context): Rename to ... (parse_exp_in_context_1): ... this. (parse_exp_in_context): Reimplement, with const hack from parse_exp_1. (parse_expression_for_completion): Make "string" parameter const. * printcmd.c (decode_format): Make "string_ptr" parameter pointer to pointer to const char. Adjust. (print_command_1): Make "exp" parameter const. (output_command): Rename to ... (output_command_const): ... this. Make "exp" parameter const. (output_command): Reimplement. (x_command): Adjust. (display_command): Rename "exp" parameter to "arg". New "exp" local, const version of "arg". * python/py-auto-load.c (gdbpy_initialize_auto_load): Make "cmd_name" local const. * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree call. (cmdpy_completer): Make "text" and "word" parameters const. (gdbpy_parse_command_name): Make "prefix_text2" local const. * python/py-param.c (add_setshow_generic): Make "tmp_name" local const. * remote.c (_initialize_remote): Make "cmd_name" local const. * symtab.c (language_search_unquoted_string): Make "text" and "p" parameters const. Adjust. (completion_list_add_fields): Make "sym_text", "text" and "word" parameters const. (struct add_name_data) <sym_text, text, word>: Make fields const. (default_make_symbol_completion_list_break_on): Make "text" and "word" parameters const. Adjust locals. (default_make_symbol_completion_list) (make_symbol_completion_list, make_symbol_completion_type) (make_symbol_completion_list_fn): Make "text" and "word" parameters const. (make_file_symbol_completion_list): Make "text", "word" and "srcfile" parameters const. Adjust locals. (add_filename_to_list): Make "text" and "word" parameters const. (struct add_partial_filename_data) <text, word>: Make fields const. (make_source_files_completion_list): Make "text" and "word" parameters const. * symtab.h (default_make_symbol_completion_list_break_on) (default_make_symbol_completion_list, make_symbol_completion_list) (make_symbol_completion_type enum type_code) (make_symbol_completion_list_fn make_file_symbol_completion_list) (make_source_files_completion_list): Change prototype. * top.c (execute_command): Adjust to pass pointer to pointer to const char to lookup_cmd, and to deprecated_cmd_warning prototype change. (set_verbose): Make "cmdname" local const. * tracepoint.c (decode_agent_options): Make "exp" parameter const, and adjust. (validate_actionline): Make "line" parameter a pointer to const char, and adjust. (encode_actions_1): Make "action_exp" local const, and adjust. (encode_actions): Adjust. (replace_comma): Delete. (trace_dump_actions): Make "action_exp" and "next_comma" locals const, and adjust. Don't frob the action string while splitting it at commas. Instead, make a copy of each split substring in turn. (trace_dump_command): Adjust to validate_actionline prototype change. * tracepoint.h (decode_agent_options, decode_agent_options) (encode_actions, validate_actionline): Change prototypes. * valprint.h (output_command): Delete declaration. (output_command_const): Declare. * value.c (function_destroyer): Cast const away in xfree call.
2013-03-13 19:34:55 +01:00
deprecated_cmd_warning (line);
/* c->user_commands would be NULL in the case of a python command. */
if (c->theclass == class_user && c->user_commands)
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
execute_user_command (c, arg);
else if (c->theclass == class_user
&& c->prefixlist && !c->allow_unknown)
/* If this is a user defined prefix that does not allow unknown
(in other words, C is a prefix command and not a command
that can be followed by its args), report the list of
subcommands. */
{
printf_unfiltered
("\"%.*s\" must be followed by the name of a subcommand.\n",
(int) strlen (c->prefixname) - 1, c->prefixname);
help_list (*c->prefixlist, c->prefixname, all_commands, gdb_stdout);
}
gdb/ * cli/cli-decode.c (set_cmd_prefix): New. (lookup_cmd_for_prefixlist): New. (add_prefix_cmd): Call set_cmd_prefix and update field 'prefix' of each cmd_list_element in *prefixlist. (add_setshow_cmd_full): set_cmd_prefix. (add_alias_cmd): Likewise. * cli/cli-decode.h (struct cmd_list_element) <prefix>: New field. Declare 'auto_boolean_enums'. * cli/cli-setshow.c: Include "observer.h". (notify_command_param_changed_p): New. (add_setshow_auto_boolean_cmd): Move auto_boolean_enums out. Remove 'static'. (do_setshow_command): Split it to ... (do_set_command, do_show_command): ... them. New. (do_set_command): Call observer_notify_command_param_changed if notify_command_param_changed_p returns true. (cmd_show_list): Caller update. * auto-load.c (set_auto_load_cmd): Likewise. * remote.c (show_remote_cmd): Likewise. * cli/cli-setshow.h: Update declarations. * top.c (execute_command): Call do_set_command and do_show_command. * NEWS: Mention new MI notification. * mi/mi-interp.c: Declare mi_command_param_changed. (mi_interpreter_init): Attach mi_command_param_changed to observer command_param_changed. (mi_command_param_changed): New. Remove mi_suppress_breakpoint_notifications. Define global variable mi_suppress_notification. (mi_breakpoint_created): Update. (mi_breakpoint_deleted): Likewise. (mi_breakpoint_modified): Likewise. * mi/mi-main.c (mi_cmd_execute): Likewise. Check command 'gdb-set' and set mi_suppress_notification. * mi/mi-main.h: (mi_suppress_notification): New struct. gdb/doc/ * observer.texi: New observer command_param_changed. * gdb.texinfo (GDB/MI Async Records): Doc for '=cmd-param-changed'. gdb/testsuite/ * gdb.mi/mi-cmd-param-changed.exp: New. * gdb.mi/mi-cli.exp: Update for MI notification "=cmd-param-changed". * gdb.mi/mi-var-rtti.exp, gdb.mi/mi2-cli.exp: Likewise. * gdb.mi/mi2-prompt.exp: Likewise.
2012-08-09 14:53:46 +02:00
else if (c->type == set_cmd)
do_set_command (arg, from_tty, c);
else if (c->type == show_cmd)
do_show_command (arg, from_tty, c);
else if (!cmd_func_p (c))
2005-02-10 Andrew Cagney <cagney@gnu.org> Mark up all error and warning messages. * ada-lang.c, amd64-tdep.c, arch-utils.c, breakpoint.c: Update. * bsd-kvm.c, bsd-uthread.c, coff-solib.h, coffread.c: Update. * core-aout.c, core-regset.c, corefile.c, corelow.c: Update. * cp-abi.c, cp-support.c, cp-valprint.c, cris-tdep.c: Update. * dbxread.c, demangle.c, doublest.c, dsrec.c: Update. * dve3900-rom.c, dwarf2expr.c, dwarf2loc.c: Update. * dwarf2read.c, dwarfread.c, elfread.c, eval.c: Update. * event-top.c, exec.c, expprint.c, f-lang.c: Update. * f-typeprint.c, f-valprint.c, fbsd-nat.c, findvar.c: Update. * frame.c, frv-linux-tdep.c, gcore.c, gdbtypes.c: Update. * gnu-nat.c, gnu-v2-abi.c, gnu-v3-abi.c, go32-nat.c: Update. * hpacc-abi.c, hppa-hpux-nat.c, hppa-hpux-tdep.c: Update. * hppa-linux-nat.c, hppa-linux-tdep.c, hppa-tdep.c: Update. * hpread.c, hpux-thread.c, i386-linux-nat.c: Update. * i386-linux-tdep.c, i386-tdep.c, i386bsd-nat.c: Update. * i386gnu-nat.c, i387-tdep.c, ia64-linux-nat.c: Update. * ia64-tdep.c, inf-child.c, inf-ptrace.c, inf-ttrace.c: Update. * infcall.c, infcmd.c, inflow.c, infptrace.c, infrun.c: Update. * inftarg.c, interps.c, irix5-nat.c, jv-lang.c: Update. * kod-cisco.c, kod.c, language.c, libunwind-frame.c: Update. * linespec.c, linux-nat.c, linux-thread-db.c, m2-lang.c: Update. * m32r-rom.c, m68hc11-tdep.c, m68k-tdep.c: Update. * m68klinux-nat.c, macrocmd.c, macroexp.c, main.c: Update. * maint.c, mdebugread.c, mem-break.c, memattr.c: Update. * mips-linux-tdep.c, mips-tdep.c, mipsread.c, monitor.c: Update. * nlmread.c, nto-procfs.c, objc-lang.c, objfiles.c: Update. * observer.c, ocd.c, p-lang.c, p-typeprint.c: Update. * p-valprint.c, pa64solib.c, parse.c, ppc-linux-tdep.c: Update. * ppcnbsd-tdep.c, printcmd.c, procfs.c, remote-e7000.c: Update. * remote-fileio.c, remote-m32r-sdi.c, remote-rdi.c: Update. * remote-rdp.c, remote-sim.c, remote-st.c: Update. * remote-utils.c, remote-utils.h, remote.c: Update. * rom68k-rom.c, rs6000-nat.c, s390-tdep.c, scm-lang.c: Update. * ser-e7kpc.c, ser-tcp.c, ser-unix.c, sh-tdep.c: Update. * sh3-rom.c, shnbsd-tdep.c, sol-thread.c, solib-aix5.c: Update. * solib-frv.c, solib-irix.c, solib-osf.c, solib-pa64.c: Update. * solib-som.c, solib-sunos.c, solib-svr4.c, solib.c: Update. * somread.c, somsolib.c, source.c, stabsread.c: Update. * stack.c, std-regs.c, symfile-mem.c, symfile.c: Update. * symmisc.c, symtab.c, target.c, thread.c, top.c: Update. * tracepoint.c, trad-frame.c, typeprint.c, utils.c: Update. * uw-thread.c, valarith.c, valops.c, valprint.c: Update. * value.c, varobj.c, version.in, win32-nat.c, wince.c: Update. * xcoffread.c, xcoffsolib.c, cli/cli-cmds.c: Update. * cli/cli-decode.c, cli/cli-dump.c, cli/cli-logging.c: Update. * cli/cli-script.c, cli/cli-setshow.c, mi/mi-cmd-break.c: Update. * mi/mi-cmd-disas.c, mi/mi-cmd-env.c, mi/mi-cmd-file.c: Update. * mi/mi-cmd-stack.c, mi/mi-cmd-var.c, mi/mi-getopt.c: Update. * mi/mi-symbol-cmds.c, tui/tui-layout.c, tui/tui-stack.c: Update. * tui/tui-win.c: Update.
2005-02-11 05:06:14 +01:00
error (_("That is not a command, just a help topic."));
2004-04-21 Andrew Cagney <cagney@redhat.com> * annotate.h (deprecated_annotate_starting_hook) (deprecated_annotate_stopped_hook) (deprecated_annotate_exited_hook) (deprecated_annotate_signal_hook) (deprecated_annotate_signalled_hook): Deprecate. * tracepoint.h (deprecated_create_tracepoint_hook) (deprecated_delete_tracepoint_hook) (deprecated_modify_tracepoint_hook) (deprecated_trace_find_hook) (deprecated_trace_start_stop_hook): Deprecate. * target.h (deprecated_target_new_objfile_hook): Deprecate. * remote.h (deprecated_target_resume_hook) (deprecated_target_wait_loop_hook): Deprecate. * gdbcore.h (deprecated_exec_file_display_hook) (deprecated_file_changed_hook): Deprecate. * frame.h (deprecated_selected_frame_level_changed_hook): Deprecate. * defs.h (deprecated_modify_breakpoint_hook) (deprecated_command_loop_hook, deprecated_show_load_progress) (deprecated_print_frame_info_listing_hook) (deprecated_query_hook, deprecated_warning_hook) (deprecated_flush_hook, deprecated_create_breakpoint_hook) (deprecated_delete_breakpoint_hook) (deprecated_interactive_hook, deprecated_registers_changed_hook) (deprecated_readline_begin_hook, deprecated_readline_hook) (deprecated_readline_end_hook, deprecated_register_changed_hook) (deprecated_memory_changed_hook, deprecated_init_ui_hook) (deprecated_context_hook, deprecated_target_wait_hook) (deprecated_attach_hook, deprecated_detach_hook) (deprecated_call_command_hook, deprecated_set_hook) (deprecated_error_hook, deprecated_error_begin_hook) (deprecated_ui_load_progress_hook): Deprecate. * valops.c, uw-thread.c, utils.c, tui/tui-io.c: Update. * tui/tui-hooks.c, tracepoint.c, top.c, thread-db.c: Update. * target.c, symfile.c, stack.c, sol-thread.c, rs6000-nat.c: Update. * remote.c, remote-mips.c, regcache.c, mi/mi-interp.c: Update. * main.c, interps.c, infcmd.c, hpux-thread.c, frame.c: Update. * exec.c, dsrec.c, d10v-tdep.c, corefile.c, complaints.c: Update. * cli/cli-script.c, cli/cli-setshow.c, breakpoint.c: Update. * annotate.c, aix-thread.c: Update.
2004-04-22 01:52:21 +02:00
else if (deprecated_call_command_hook)
deprecated_call_command_hook (c, arg, from_tty);
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
else
cmd_func (c, arg, from_tty);
gdb/17347 - Regression: GDB stopped on run with attached process Doing: gdb --pid=PID -ex run Results in GDB getting a SIGTTIN, and thus ending stopped. That's usually indicative of a missing target_terminal_ours call. E.g., from the PR: $ sleep 1h & p=$!; sleep 0.1; gdb -batch sleep $p -ex run [1] 28263 [1] Killed sleep 1h [2]+ Stopped gdb -batch sleep $p -ex run The workaround is doing: gdb -ex "attach $PID" -ex "run" instead of gdb [-p] $PID -ex "run" With the former, gdb waits for the attach command to complete before moving on to the "run" command, because the interpreter is in sync mode at this point, within execute_command. But for the latter, attach_command is called directly from captured_main, and thus misses that waiting. IOW, "run" is running before the attach continuation has run, before the program stops and attach completes. The broken terminal settings are just one symptom of that. Any command that queries or requires input results in the same. The fix is to wait in catch_command_errors (which is specific to main.c nowadays), just like we wait in execute_command. gdb/ChangeLog: 2014-09-11 Pedro Alves <palves@redhat.com> PR gdb/17347 * main.c: Include "infrun.h". (catch_command_errors, catch_command_errors_const): Wait for the foreground command to complete. * top.c (maybe_wait_sync_command_done): New function, factored out from ... (maybe_wait_sync_command_done): ... here. * top.h (maybe_wait_sync_command_done): New declaration. gdb/testsuite/ChangeLog: 2014-09-11 Pedro Alves <palves@redhat.com> PR gdb/17347 * lib/gdb.exp (gdb_spawn_with_cmdline_opts): New procedure. * gdb.base/attach.exp (test_command_line_attach_run): New procedure. (top level): Call it.
2014-09-11 14:04:15 +02:00
maybe_wait_sync_command_done (was_sync);
/* If this command has been post-hooked, run the hook last. */
execute_cmd_post_hook (c);
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
if (repeat_arguments != NULL && cmd_start == saved_command_line)
{
gdb_assert (strlen (args_pointer) >= strlen (repeat_arguments));
Constify execute_command This constifies execute_command and fixes up the callers. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * event-top.h (command_handler): Constify. * record-full.c (cmd_record_full_start): Update. * thread.c (thread_apply_all_command): Update. * printcmd.c (eval_command): Update. * mi/mi-main.c (mi_execute_cli_command): Update. (mi_execute_async_cli_command): Update. * tui/tui-stack.c (tui_update_command): Update. * cli/cli-interp.c (safe_execute_command): Constify. * record.c (record_start): Update. (record_start, record_stop, cmd_record_start): Update. * record-btrace.c (cmd_record_btrace_bts_start): Update. (cmd_record_btrace_pt_start): Update. (cmd_record_btrace_start): Update. (cmd_record_btrace_start): Update. * reverse.c (exec_reverse_once): Update. * python/python.c (execute_gdb_command): Don't copy the command. * event-top.c (command_line_handler): Update. (command_handler): Constify. * defs.h (deprecated_call_command_hook): Constify. * cli/cli-script.h (execute_user_command): Constify. * cli/cli-script.c (execute_user_command): Constify. (execute_cmd_pre_hook, execute_cmd_post_hook): Constify. (enum command_control_type): Update. * main.c (catch_command_errors): Remove non-const overload. (catch_command_errors_ftype): Remove. * python/py-cmd.c (cmdpy_function): Constify. * guile/scm-cmd.c (cmdscm_function): Constify. * cli/cli-dump.c (call_dump_func): Constify. * cli/cli-decode.c (do_const_cfunc): Constify. (do_sfunc): Constify. (cmd_func): Constify. * gdbcmd.h (execute_command, execute_command_to_string): Constify. * top.h (execute_command): Constify. * top.c (execute_command): Constify. (execute_command_to_string): Constify. (deprecated_call_command_hook): Constify. * command.h (cmd_func): Constify. * cli/cli-decode.h (struct cmd_list_element) <func>: Constify.
2017-10-15 16:36:51 +02:00
strcpy (saved_command_line + (args_pointer - cmd_start),
repeat_arguments);
}
}
[Ada/ravenscar] error during "continue" after task/thread switch When debugging a program using the Ada ravenscar profile, resuming a program's execution after having switched to a different task sometimes yields the following error: (gdb) cont Continuing. Cannot execute this command while the target is running. Use the "interrupt" command to stop the target and then try again. In short, the Ravenscar profile is a standardized subset of Ada which allows tasking (often mapped to threads). We often use it on baremetal targets where there is no OS support. Thread support is implemented as a thread target_ops layer. It sits on top of the "remote" layer, so we can do thread debugging against baremetal targets to which GDB is connected via "target remote". What happens, when the user request the program to resume execution, is the following: - the ravenscar-thread target_ops layer gets the order to resume the program's execution. The current thread is not the active thread in the inferior, and the "remote" layer doesn't know about that thread anyway. So what we do is (see ravenscar_resume): + switch inferior_ptid to the ptid of the actually active thread; + ask the layer beneath us to actually do the resume. - Once that's done, the resuming itself is done. But execute_command (in top.c) actually does a bit more. More precisely, it unconditionally checks to see if the language may no longer be matching the current frame: check_frame_language_change (); The problem, here, is that we haven't received the "stop" event from the inferior, yet. This part will be handled by the event loop, which is done later. So, checking for the language-change here doesn't make sense, since we don't really have a frame. In our case, the error comes from the fact that we end up trying to read the registers, which causes the error while the remote protocol is waiting for the event showing the inferior stopped. This apparently used to work, but it is believed that this was only accidental. In other words, we had enough information already cached within GDB that we were able to perform the entire call to check_frame_language_change without actually querying the target. On PowerPC targets, this started to fail as a side-effect of a minor change in the way we get to the regcache during the handling of software-single-step (which seems fine). This patch fixes the issue by only calling check_frame_language_change in cases the inferior isn't running. Otherwise, it skips it, knowing that the event loop should eventually get to it. gdb/ChangeLog: * top.c (execute_command): Do not call check_frame_language_change if the inferior is running. Tested on x86_64-linux, no regression. Also tested on aarch64-elf, arm-elf, leon3-elf, and ppc-elf, but using AdaCore's testsuite.
2018-05-01 00:05:42 +02:00
/* Only perform the frame-language-change check if the command
we just finished executing did not resume the inferior's execution.
If it did resume the inferior, we will do that check after
the inferior stopped. */
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
if (has_stack_frames () && inferior_thread ()->state != THREAD_RUNNING)
[Ada/ravenscar] error during "continue" after task/thread switch When debugging a program using the Ada ravenscar profile, resuming a program's execution after having switched to a different task sometimes yields the following error: (gdb) cont Continuing. Cannot execute this command while the target is running. Use the "interrupt" command to stop the target and then try again. In short, the Ravenscar profile is a standardized subset of Ada which allows tasking (often mapped to threads). We often use it on baremetal targets where there is no OS support. Thread support is implemented as a thread target_ops layer. It sits on top of the "remote" layer, so we can do thread debugging against baremetal targets to which GDB is connected via "target remote". What happens, when the user request the program to resume execution, is the following: - the ravenscar-thread target_ops layer gets the order to resume the program's execution. The current thread is not the active thread in the inferior, and the "remote" layer doesn't know about that thread anyway. So what we do is (see ravenscar_resume): + switch inferior_ptid to the ptid of the actually active thread; + ask the layer beneath us to actually do the resume. - Once that's done, the resuming itself is done. But execute_command (in top.c) actually does a bit more. More precisely, it unconditionally checks to see if the language may no longer be matching the current frame: check_frame_language_change (); The problem, here, is that we haven't received the "stop" event from the inferior, yet. This part will be handled by the event loop, which is done later. So, checking for the language-change here doesn't make sense, since we don't really have a frame. In our case, the error comes from the fact that we end up trying to read the registers, which causes the error while the remote protocol is waiting for the event showing the inferior stopped. This apparently used to work, but it is believed that this was only accidental. In other words, we had enough information already cached within GDB that we were able to perform the entire call to check_frame_language_change without actually querying the target. On PowerPC targets, this started to fail as a side-effect of a minor change in the way we get to the regcache during the handling of software-single-step (which seems fine). This patch fixes the issue by only calling check_frame_language_change in cases the inferior isn't running. Otherwise, it skips it, knowing that the event loop should eventually get to it. gdb/ChangeLog: * top.c (execute_command): Do not call check_frame_language_change if the inferior is running. Tested on x86_64-linux, no regression. Also tested on aarch64-elf, arm-elf, leon3-elf, and ppc-elf, but using AdaCore's testsuite.
2018-05-01 00:05:42 +02:00
check_frame_language_change ();
cleanup_if_error.release ();
}
/* Run execute_command for P and FROM_TTY. Sends its output to FILE,
do not display it to the screen. BATCH_FLAG will be
temporarily set to true. */
void
execute_command_to_ui_file (struct ui_file *file, const char *p, int from_tty)
{
/* GDB_STDOUT should be better already restored during these
restoration callbacks. */
set_batch_flag_and_restore_page_info save_page_info;
scoped_restore save_async = make_scoped_restore (&current_ui->async, 0);
{
current_uiout->redirect (file);
ui_out_redirect_pop redirect_popper (current_uiout);
scoped_restore save_stdout
= make_scoped_restore (&gdb_stdout, file);
scoped_restore save_stderr
= make_scoped_restore (&gdb_stderr, file);
scoped_restore save_stdlog
= make_scoped_restore (&gdb_stdlog, file);
scoped_restore save_stdtarg
= make_scoped_restore (&gdb_stdtarg, file);
scoped_restore save_stdtargerr
= make_scoped_restore (&gdb_stdtargerr, file);
execute_command (p, from_tty);
}
}
/* Run execute_command for P and FROM_TTY. Capture its output into the
returned string, do not display it to the screen. BATCH_FLAG will be
temporarily set to true. */
std::string
execute_command_to_string (const char *p, int from_tty,
bool term_out)
{
string_file str_file (term_out);
execute_command_to_ui_file (&str_file, p, from_tty);
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 12:11:47 +01:00
return std::move (str_file.string ());
}
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* When nonzero, cause dont_repeat to do nothing. This should only be
set via prevent_dont_repeat. */
static int suppress_dont_repeat = 0;
Add previous_saved_command_line to allow a command to repeat a previous command. Currently, a previous command can be repeated when the user types an empty line. This is implemented in handle_line_of_input by returning saved_command_line in case an empty line has been input. If we want a command to repeat the previous command, we need to save the previous saved_command_line, as when a command runs, the saved_command_line already contains the current command line of the command being executed. As suggested by Tom, the previous_saved_command_line is made static. At the same time, saved_command_line is also made static. The support functions/variables for the repeat command logic are now all located inside top.c. gdb/ChangeLog 2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.h (saved_command_line): Remove declaration. * top.c (previous_saved_command_line, previous_repeat_arguments): New variables. (saved_command_line): Make static, define together with other 'repeat variables'. (dont_repeat): Clear repeat_arguments. (repeat_previous, get_saved_command_line, save_command_line): New functions. (gdb_init): Initialize saved_command_line and previous_saved_command_line. * main.c (captured_main_1): Remove saved_command_line initialization. * event-top.c (handle_line_of_input): Update to use the new 'repeat' related functions instead of direct access to saved_command_line. * command.h (repeat_previous, get_saved_command_line, save_command_line): New declarations. (dont_repeat): Add comment.
2019-04-20 14:02:29 +02:00
/* See command.h */
1999-06-21 15:27:42 +02:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
void
dont_repeat (void)
1999-06-21 15:27:42 +02:00
{
struct ui *ui = current_ui;
if (suppress_dont_repeat || server_command)
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
return;
1999-06-21 15:27:42 +02:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* If we aren't reading from standard input, we are saving the last
thing read from stdin in line and don't want to delete it. Null
lines won't repeat here in any case. */
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
if (ui->instream == ui->stdin_stream)
Add previous_saved_command_line to allow a command to repeat a previous command. Currently, a previous command can be repeated when the user types an empty line. This is implemented in handle_line_of_input by returning saved_command_line in case an empty line has been input. If we want a command to repeat the previous command, we need to save the previous saved_command_line, as when a command runs, the saved_command_line already contains the current command line of the command being executed. As suggested by Tom, the previous_saved_command_line is made static. At the same time, saved_command_line is also made static. The support functions/variables for the repeat command logic are now all located inside top.c. gdb/ChangeLog 2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.h (saved_command_line): Remove declaration. * top.c (previous_saved_command_line, previous_repeat_arguments): New variables. (saved_command_line): Make static, define together with other 'repeat variables'. (dont_repeat): Clear repeat_arguments. (repeat_previous, get_saved_command_line, save_command_line): New functions. (gdb_init): Initialize saved_command_line and previous_saved_command_line. * main.c (captured_main_1): Remove saved_command_line initialization. * event-top.c (handle_line_of_input): Update to use the new 'repeat' related functions instead of direct access to saved_command_line. * command.h (repeat_previous, get_saved_command_line, save_command_line): New declarations. (dont_repeat): Add comment.
2019-04-20 14:02:29 +02:00
{
*saved_command_line = 0;
repeat_arguments = NULL;
}
}
/* See command.h */
Introduce the "with" command ( See original discussion and prototype here: https://sourceware.org/ml/gdb-patches/2019-05/msg00570.html ) (gdb) help with Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING. Usage: with SETTING [VALUE] [-- COMMAND] Usage: w SETTING [VALUE] [-- COMMAND] With no COMMAND, repeats the last executed command. SETTING is any setting you can change with the "set" subcommands. E.g.: with language pascal -- print obj with print elements unlimited -- print obj As can be seen above, the "with" command is just like "set", but instead of setting the setting permanently, it sets the setting, runs a command and then restores the setting. (gdb) p g_s $1 = {a = 1, b = 2, c = 3} (gdb) with language ada -- print g_s $2 = (a => 1, b => 2, c => 3) Warning: the current language does not match this frame. (gdb) show language The current source language is "auto; currently c". (gdb) with print elements 100 -- with print object on -- print 1 $3 = 1 You can shorten things a bit though, as long as unambiguous. So this: (gdb) with print elements 100 -- with print object off -- print 1 is the same as: (gdb) w p el 100 -- w p o 0 -- p 1 Note that the patch adds a "w" alias for "with", as "w" is not currently taken: (gdb) w Ambiguous command "w": watch, wh, whatis, where, while, while-stepping, winheight, ws. Let me know if you'd prefer to reserve "w" for one of the other commands above. IMHO, this command will end up being used frequently enough that it deserves the "w" shorthand. A nice feature is that this is fully integrated with TAB-completion: (gdb) with p[TAB] pagination print prompt python (gdb) with print [TAB] address max-depth static-members array max-symbolic-offset symbol array-indexes null-stop symbol-filename asm-demangle object symbol-loading demangle pascal_static-members thread-events elements pretty type entry-values raw union frame-arguments repeats vtbl inferior-events sevenbit-strings (gdb) with print [TAB] (gdb) with print elements unlimited -- thread apply all -[TAB] -ascending -c -q -s (gdb) with print elements unlimited -- print -[TAB] -address -max-depth -repeats -vtbl -array -null-stop -static-members -array-indexes -object -symbol -elements -pretty -union The main advantage of this new command compared to command options, like the new "print -OPT", is that this command works with any setting, and, it works nicely when you want to override a setting while running a user-defined command, like: (gdb) with print pretty -- usercmd The disadvantage is that it isn't as compact or easy to type. I think of command options and this command as complementary. I think that even with this new command, it makes sense to continue developing the command options in the direction of exposing most-oft-used settings as command options. Inspired by Philippe's "/" command proposal, if no command is specified, then the last command is re-invoked, under the overridden setting: (gdb) p g_s $1 = {a = 1, b = 2, c = 3} (gdb) with language ada $2 = (a => 1, b => 2, c => 3) Warning: the current language does not match this frame. Note: "with" requires "--" to separate the setting from the command. It might be possible to do without that, but, I haven't tried it yet, and I think that this can go in without it. We can always downgrade to making "--" optional if we manage to make it work. On to the patch itself, the implementation of the command is simpler than one might expect. A few details: - I factored out a bit from pipe_command into repeat_previous directly, because otherwise I'd need to copy&paste the same code and same error message in the with command. - The parse_cli_var_uinteger / parse_cli_var_zuinteger_unlimited / do_set_command changes are necessary since we can now pass an empty string as argument. - do_show_command was split in two, as a FIXME comment suggests, but for a different reason: we need to get a string version of a "set" command's value, and we already had code for that in do_show_command. That code is now factored out to the new get_setshow_command_value_string function. - There's a new "maint with" command added too: (gdb) help maint with Like "with", but works with "maintenance set" variables. Usage: maintenance with SETTING [VALUE] [-- COMMAND] With no COMMAND, repeats the last executed command. SETTING is any setting you can change with the "maintenance set" subcommands. "with" and "maint with" share 99% of the implementation. This might be useful on its own, but it's also useful for testing, since with this, we can use the "maint set/show test-settings" settings for exercising the "with" machinery with all the command type variants (all enum var_types). This is done in the new gdb/base/with.exp testcase. The documentation bits are originally based on Philippe's docs for the "/" command, hence the attribution in the ChangeLog. gdb/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> * NEWS (New commands): Mention "with" and "maint with". * cli/cli-cmds.c (with_command_1, with_command_completer_1) (with_command, with_command_completer): New. (pipe_command): Adjust to new repeat_previous interface. (_initialize_cli_cmds): Install the "with" command and its "w" alias. * cli/cli-cmds.h (with_command_1, with_command_completer_1): New declarations. * cli/cli-setshow.c (parse_cli_var_uinteger) (parse_cli_var_zuinteger_unlimited, do_set_command): Handle empty argument strings for all var_types. (get_setshow_command_value_string): New, factored out from ... (do_show_command): ... this. * cli/cli-setshow.h: Include <string>. (get_setshow_command_value_string): Declare. * command.h (repeat_previous): Now returns const char *. Adjust comment. * maint.c: Include "cli/cli-cmds.h". (maintenance_with_cmd, maintenance_with_cmd_completer): New. (_initialize_maint_cmds): Register the "maintenance with" command. * top.c (repeat_previous): Move bits from pipe_command here: Return the saved command line, if any; error out if there's no command to relaunch. gdb/doc/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.texinfo (Command Settings): New node documenting the general concept of settings, how to change them, and the new "with" command. (Maintenance Commands): Document "maint with". gdb/testsuite/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> * gdb.base/with.c: New file. * gdb.base/with.exp: New file.
2019-07-03 14:34:20 +02:00
const char *
Add previous_saved_command_line to allow a command to repeat a previous command. Currently, a previous command can be repeated when the user types an empty line. This is implemented in handle_line_of_input by returning saved_command_line in case an empty line has been input. If we want a command to repeat the previous command, we need to save the previous saved_command_line, as when a command runs, the saved_command_line already contains the current command line of the command being executed. As suggested by Tom, the previous_saved_command_line is made static. At the same time, saved_command_line is also made static. The support functions/variables for the repeat command logic are now all located inside top.c. gdb/ChangeLog 2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.h (saved_command_line): Remove declaration. * top.c (previous_saved_command_line, previous_repeat_arguments): New variables. (saved_command_line): Make static, define together with other 'repeat variables'. (dont_repeat): Clear repeat_arguments. (repeat_previous, get_saved_command_line, save_command_line): New functions. (gdb_init): Initialize saved_command_line and previous_saved_command_line. * main.c (captured_main_1): Remove saved_command_line initialization. * event-top.c (handle_line_of_input): Update to use the new 'repeat' related functions instead of direct access to saved_command_line. * command.h (repeat_previous, get_saved_command_line, save_command_line): New declarations. (dont_repeat): Add comment.
2019-04-20 14:02:29 +02:00
repeat_previous ()
{
/* Do not repeat this command, as this command is a repeating command. */
dont_repeat ();
/* We cannot free saved_command_line, as this line is being executed,
so swap it with previous_saved_command_line. */
std::swap (previous_saved_command_line, saved_command_line);
std::swap (previous_repeat_arguments, repeat_arguments);
Introduce the "with" command ( See original discussion and prototype here: https://sourceware.org/ml/gdb-patches/2019-05/msg00570.html ) (gdb) help with Temporarily set SETTING to VALUE, run COMMAND, and restore SETTING. Usage: with SETTING [VALUE] [-- COMMAND] Usage: w SETTING [VALUE] [-- COMMAND] With no COMMAND, repeats the last executed command. SETTING is any setting you can change with the "set" subcommands. E.g.: with language pascal -- print obj with print elements unlimited -- print obj As can be seen above, the "with" command is just like "set", but instead of setting the setting permanently, it sets the setting, runs a command and then restores the setting. (gdb) p g_s $1 = {a = 1, b = 2, c = 3} (gdb) with language ada -- print g_s $2 = (a => 1, b => 2, c => 3) Warning: the current language does not match this frame. (gdb) show language The current source language is "auto; currently c". (gdb) with print elements 100 -- with print object on -- print 1 $3 = 1 You can shorten things a bit though, as long as unambiguous. So this: (gdb) with print elements 100 -- with print object off -- print 1 is the same as: (gdb) w p el 100 -- w p o 0 -- p 1 Note that the patch adds a "w" alias for "with", as "w" is not currently taken: (gdb) w Ambiguous command "w": watch, wh, whatis, where, while, while-stepping, winheight, ws. Let me know if you'd prefer to reserve "w" for one of the other commands above. IMHO, this command will end up being used frequently enough that it deserves the "w" shorthand. A nice feature is that this is fully integrated with TAB-completion: (gdb) with p[TAB] pagination print prompt python (gdb) with print [TAB] address max-depth static-members array max-symbolic-offset symbol array-indexes null-stop symbol-filename asm-demangle object symbol-loading demangle pascal_static-members thread-events elements pretty type entry-values raw union frame-arguments repeats vtbl inferior-events sevenbit-strings (gdb) with print [TAB] (gdb) with print elements unlimited -- thread apply all -[TAB] -ascending -c -q -s (gdb) with print elements unlimited -- print -[TAB] -address -max-depth -repeats -vtbl -array -null-stop -static-members -array-indexes -object -symbol -elements -pretty -union The main advantage of this new command compared to command options, like the new "print -OPT", is that this command works with any setting, and, it works nicely when you want to override a setting while running a user-defined command, like: (gdb) with print pretty -- usercmd The disadvantage is that it isn't as compact or easy to type. I think of command options and this command as complementary. I think that even with this new command, it makes sense to continue developing the command options in the direction of exposing most-oft-used settings as command options. Inspired by Philippe's "/" command proposal, if no command is specified, then the last command is re-invoked, under the overridden setting: (gdb) p g_s $1 = {a = 1, b = 2, c = 3} (gdb) with language ada $2 = (a => 1, b => 2, c => 3) Warning: the current language does not match this frame. Note: "with" requires "--" to separate the setting from the command. It might be possible to do without that, but, I haven't tried it yet, and I think that this can go in without it. We can always downgrade to making "--" optional if we manage to make it work. On to the patch itself, the implementation of the command is simpler than one might expect. A few details: - I factored out a bit from pipe_command into repeat_previous directly, because otherwise I'd need to copy&paste the same code and same error message in the with command. - The parse_cli_var_uinteger / parse_cli_var_zuinteger_unlimited / do_set_command changes are necessary since we can now pass an empty string as argument. - do_show_command was split in two, as a FIXME comment suggests, but for a different reason: we need to get a string version of a "set" command's value, and we already had code for that in do_show_command. That code is now factored out to the new get_setshow_command_value_string function. - There's a new "maint with" command added too: (gdb) help maint with Like "with", but works with "maintenance set" variables. Usage: maintenance with SETTING [VALUE] [-- COMMAND] With no COMMAND, repeats the last executed command. SETTING is any setting you can change with the "maintenance set" subcommands. "with" and "maint with" share 99% of the implementation. This might be useful on its own, but it's also useful for testing, since with this, we can use the "maint set/show test-settings" settings for exercising the "with" machinery with all the command type variants (all enum var_types). This is done in the new gdb/base/with.exp testcase. The documentation bits are originally based on Philippe's docs for the "/" command, hence the attribution in the ChangeLog. gdb/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> * NEWS (New commands): Mention "with" and "maint with". * cli/cli-cmds.c (with_command_1, with_command_completer_1) (with_command, with_command_completer): New. (pipe_command): Adjust to new repeat_previous interface. (_initialize_cli_cmds): Install the "with" command and its "w" alias. * cli/cli-cmds.h (with_command_1, with_command_completer_1): New declarations. * cli/cli-setshow.c (parse_cli_var_uinteger) (parse_cli_var_zuinteger_unlimited, do_set_command): Handle empty argument strings for all var_types. (get_setshow_command_value_string): New, factored out from ... (do_show_command): ... this. * cli/cli-setshow.h: Include <string>. (get_setshow_command_value_string): Declare. * command.h (repeat_previous): Now returns const char *. Adjust comment. * maint.c: Include "cli/cli-cmds.h". (maintenance_with_cmd, maintenance_with_cmd_completer): New. (_initialize_maint_cmds): Register the "maintenance with" command. * top.c (repeat_previous): Move bits from pipe_command here: Return the saved command line, if any; error out if there's no command to relaunch. gdb/doc/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.texinfo (Command Settings): New node documenting the general concept of settings, how to change them, and the new "with" command. (Maintenance Commands): Document "maint with". gdb/testsuite/ChangeLog: 2019-07-03 Pedro Alves <palves@redhat.com> * gdb.base/with.c: New file. * gdb.base/with.exp: New file.
2019-07-03 14:34:20 +02:00
const char *prev = skip_spaces (get_saved_command_line ());
if (*prev == '\0')
error (_("No previous command to relaunch"));
return prev;
1999-06-21 15:27:42 +02:00
}
Add previous_saved_command_line to allow a command to repeat a previous command. Currently, a previous command can be repeated when the user types an empty line. This is implemented in handle_line_of_input by returning saved_command_line in case an empty line has been input. If we want a command to repeat the previous command, we need to save the previous saved_command_line, as when a command runs, the saved_command_line already contains the current command line of the command being executed. As suggested by Tom, the previous_saved_command_line is made static. At the same time, saved_command_line is also made static. The support functions/variables for the repeat command logic are now all located inside top.c. gdb/ChangeLog 2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.h (saved_command_line): Remove declaration. * top.c (previous_saved_command_line, previous_repeat_arguments): New variables. (saved_command_line): Make static, define together with other 'repeat variables'. (dont_repeat): Clear repeat_arguments. (repeat_previous, get_saved_command_line, save_command_line): New functions. (gdb_init): Initialize saved_command_line and previous_saved_command_line. * main.c (captured_main_1): Remove saved_command_line initialization. * event-top.c (handle_line_of_input): Update to use the new 'repeat' related functions instead of direct access to saved_command_line. * command.h (repeat_previous, get_saved_command_line, save_command_line): New declarations. (dont_repeat): Add comment.
2019-04-20 14:02:29 +02:00
/* See command.h. */
scoped_restore_tmpl<int>
prevent_dont_repeat (void)
{
return make_scoped_restore (&suppress_dont_repeat, 1);
}
Add previous_saved_command_line to allow a command to repeat a previous command. Currently, a previous command can be repeated when the user types an empty line. This is implemented in handle_line_of_input by returning saved_command_line in case an empty line has been input. If we want a command to repeat the previous command, we need to save the previous saved_command_line, as when a command runs, the saved_command_line already contains the current command line of the command being executed. As suggested by Tom, the previous_saved_command_line is made static. At the same time, saved_command_line is also made static. The support functions/variables for the repeat command logic are now all located inside top.c. gdb/ChangeLog 2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.h (saved_command_line): Remove declaration. * top.c (previous_saved_command_line, previous_repeat_arguments): New variables. (saved_command_line): Make static, define together with other 'repeat variables'. (dont_repeat): Clear repeat_arguments. (repeat_previous, get_saved_command_line, save_command_line): New functions. (gdb_init): Initialize saved_command_line and previous_saved_command_line. * main.c (captured_main_1): Remove saved_command_line initialization. * event-top.c (handle_line_of_input): Update to use the new 'repeat' related functions instead of direct access to saved_command_line. * command.h (repeat_previous, get_saved_command_line, save_command_line): New declarations. (dont_repeat): Add comment.
2019-04-20 14:02:29 +02:00
/* See command.h. */
char *
get_saved_command_line ()
{
return saved_command_line;
}
/* See command.h. */
void
save_command_line (const char *cmd)
{
xfree (previous_saved_command_line);
previous_saved_command_line = saved_command_line;
previous_repeat_arguments = repeat_arguments;
saved_command_line = xstrdup (cmd);
repeat_arguments = NULL;
}
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* Read a line from the stream "instream" without command line editing.
1999-06-21 15:27:42 +02:00
It prints PROMPT once at the start.
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
Action is compatible with "readline", e.g. space for the result is
malloc'd and should be freed by the caller.
1999-06-21 15:27:42 +02:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
A NULL return means end of file. */
static char *
gdb_readline_no_editing (const char *prompt)
1999-06-21 15:27:42 +02:00
{
struct buffer line_buffer;
struct ui *ui = current_ui;
/* Read from stdin if we are executing a user defined command. This
is the right thing for prompt_for_continue, at least. */
FILE *stream = ui->instream != NULL ? ui->instream : stdin;
int fd = fileno (stream);
1999-06-21 15:27:42 +02:00
buffer_init (&line_buffer);
if (prompt != NULL)
1999-06-21 15:27:42 +02:00
{
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* Don't use a _filtered function here. It causes the assumed
character position to be off, since the newline we read from
the user is not accounted for. */
fputs_unfiltered (prompt, gdb_stdout);
1999-06-21 15:27:42 +02:00
gdb_flush (gdb_stdout);
}
while (1)
{
int c;
fd_set readfds;
QUIT;
/* Wait until at least one byte of data is available. Control-C
Introduce interruptible_select We have places where we call a blocking gdb_select expecting that a Ctrl-C will unblock it. However, if the Ctrl-C is pressed just before gdb_select, the SIGINT handler runs before gdb_select, and thus gdb_select won't return. For example gdb_readline_no_editing: QUIT; /* Wait until at least one byte of data is available. Control-C can interrupt gdb_select, but not fgetc. */ FD_ZERO (&readfds); FD_SET (fd, &readfds); if (gdb_select (fd + 1, &readfds, NULL, NULL, NULL) == -1) and stdio_file_read: /* For the benefit of Windows, call gdb_select before reading from the file. Wait until at least one byte of data is available. Control-C can interrupt gdb_select, but not read. */ { fd_set readfds; FD_ZERO (&readfds); FD_SET (stdio->fd, &readfds); if (gdb_select (stdio->fd + 1, &readfds, NULL, NULL, NULL) == -1) return -1; } return read (stdio->fd, buf, length_buf); This is a race classically fixed with either the self-pipe trick, or by blocking SIGINT and then using pselect instead of select. Blocking SIGINT most of the time would mean that check_quit_flag (and thus QUIT) would need to do a syscall every time it is called, which sounds best avoided, since QUIT is called in many loops. Thus we take the self-pipe trick route (wrapped in a serial event). Instead of having all places that need this manually add an extra file descriptor to the set of gdb_select's watched file descriptors, we introduce a wrapper, interruptible_select, that does that. The Windows version of gdb_select actually does not suffer from this, because mingw-hdep.c:gdb_call_async_signal_handler sets a Windows event that gdb_select always waits on. So this patch can be seen as generalization of that technique. We can't remove that extra event from mingw-hdep.c until we get rid of immediate_quit though. gdb/ChangeLog: 2016-04-12 Pedro Alves <palves@redhat.com> * defs.h: Extend QUIT-related comments to mention interruptible_select. (quit_serial_event_set, quit_serial_event_clear): Declare. * event-top.c: Include "ser-event.h" and "gdb_select.h". (quit_serial_event): New global. (async_init_signals): Make quit_serial_event. (quit_serial_event_set, quit_serial_event_clear) (quit_serial_event_fd, interruptible_select): New functions. * extension.c (set_quit_flag): Set the quit serial event. (check_quit_flag): Clear the quit serial event. * gdb_select.h (interruptible_select): New declaration. * guile/scm-ports.c (ioscm_input_waiting): Use interruptible_select instead of gdb_select. * top.c (gdb_readline_no_editing): Likewise. * ui-file.c (stdio_file_read): Likewise.
2016-04-12 17:49:30 +02:00
can interrupt interruptible_select, but not fgetc. */
FD_ZERO (&readfds);
FD_SET (fd, &readfds);
Introduce interruptible_select We have places where we call a blocking gdb_select expecting that a Ctrl-C will unblock it. However, if the Ctrl-C is pressed just before gdb_select, the SIGINT handler runs before gdb_select, and thus gdb_select won't return. For example gdb_readline_no_editing: QUIT; /* Wait until at least one byte of data is available. Control-C can interrupt gdb_select, but not fgetc. */ FD_ZERO (&readfds); FD_SET (fd, &readfds); if (gdb_select (fd + 1, &readfds, NULL, NULL, NULL) == -1) and stdio_file_read: /* For the benefit of Windows, call gdb_select before reading from the file. Wait until at least one byte of data is available. Control-C can interrupt gdb_select, but not read. */ { fd_set readfds; FD_ZERO (&readfds); FD_SET (stdio->fd, &readfds); if (gdb_select (stdio->fd + 1, &readfds, NULL, NULL, NULL) == -1) return -1; } return read (stdio->fd, buf, length_buf); This is a race classically fixed with either the self-pipe trick, or by blocking SIGINT and then using pselect instead of select. Blocking SIGINT most of the time would mean that check_quit_flag (and thus QUIT) would need to do a syscall every time it is called, which sounds best avoided, since QUIT is called in many loops. Thus we take the self-pipe trick route (wrapped in a serial event). Instead of having all places that need this manually add an extra file descriptor to the set of gdb_select's watched file descriptors, we introduce a wrapper, interruptible_select, that does that. The Windows version of gdb_select actually does not suffer from this, because mingw-hdep.c:gdb_call_async_signal_handler sets a Windows event that gdb_select always waits on. So this patch can be seen as generalization of that technique. We can't remove that extra event from mingw-hdep.c until we get rid of immediate_quit though. gdb/ChangeLog: 2016-04-12 Pedro Alves <palves@redhat.com> * defs.h: Extend QUIT-related comments to mention interruptible_select. (quit_serial_event_set, quit_serial_event_clear): Declare. * event-top.c: Include "ser-event.h" and "gdb_select.h". (quit_serial_event): New global. (async_init_signals): Make quit_serial_event. (quit_serial_event_set, quit_serial_event_clear) (quit_serial_event_fd, interruptible_select): New functions. * extension.c (set_quit_flag): Set the quit serial event. (check_quit_flag): Clear the quit serial event. * gdb_select.h (interruptible_select): New declaration. * guile/scm-ports.c (ioscm_input_waiting): Use interruptible_select instead of gdb_select. * top.c (gdb_readline_no_editing): Likewise. * ui-file.c (stdio_file_read): Likewise.
2016-04-12 17:49:30 +02:00
if (interruptible_select (fd + 1, &readfds, NULL, NULL, NULL) == -1)
{
if (errno == EINTR)
{
/* If this was ctrl-c, the QUIT above handles it. */
continue;
}
perror_with_name (("select"));
}
c = fgetc (stream);
1999-06-21 15:27:42 +02:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
if (c == EOF)
1999-06-21 15:27:42 +02:00
{
if (line_buffer.used_size > 0)
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* The last line does not end with a newline. Return it, and
if we are called again fgetc will still return EOF and
we'll return NULL then. */
1999-06-21 15:27:42 +02:00
break;
xfree (buffer_finish (&line_buffer));
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
return NULL;
1999-06-21 15:27:42 +02:00
}
1999-07-07 22:19:36 +02:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
if (c == '\n')
1999-06-21 15:27:42 +02:00
{
if (line_buffer.used_size > 0
&& line_buffer.buffer[line_buffer.used_size - 1] == '\r')
line_buffer.used_size--;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
break;
1999-06-21 15:27:42 +02:00
}
buffer_grow_char (&line_buffer, c);
1999-06-21 15:27:42 +02:00
}
buffer_grow_char (&line_buffer, '\0');
return buffer_finish (&line_buffer);
1999-06-21 15:27:42 +02:00
}
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* Variables which control command line editing and history
substitution. These variables are given default values at the end
of this file. */
Change boolean options to bool instead of int This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise.
2019-09-14 21:36:58 +02:00
static bool command_editing_p;
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* NOTE 1999-04-29: This variable will be static again, once we modify
gdb to use the event loop as the default command loop and we merge
event-top.c into this file, top.c. */
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
Change boolean options to bool instead of int This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise.
2019-09-14 21:36:58 +02:00
/* static */ bool history_expansion_p;
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
/* Should we write out the command history on exit? In order to write out
the history both this flag must be true, and the history_filename
variable must be set to something sensible. */
Change boolean options to bool instead of int This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise.
2019-09-14 21:36:58 +02:00
static bool write_history_p;
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
/* Implement 'show history save'. */
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
static void
show_write_history_p (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
if (!write_history_p || !history_filename_empty ())
fprintf_filtered (file, _("Saving of the history record on exit is %s.\n"),
value);
else
fprintf_filtered (file, _("Saving of the history is disabled due to "
"the value of 'history filename'.\n"));
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
}
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
/* The variable associated with the "set/show history size"
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
command. The value -1 means unlimited, and -2 means undefined. */
static int history_size_setshow_var = -2;
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
static void
show_history_size (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("The size of the command history is %s.\n"),
value);
}
2015-06-03 04:49:15 +02:00
/* Variable associated with the "history remove-duplicates" option.
The value -1 means unlimited. */
static int history_remove_duplicates = 0;
static void
show_history_remove_duplicates (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file,
_("The number of history entries to look back at for "
"duplicates is %s.\n"),
value);
}
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
/* The name of the file in which GDB history will be written. If this is
set to NULL, of the empty string then history will not be written. */
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
static char *history_filename;
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
/* Return true if the history_filename is either NULL or the empty string,
indicating that we should not try to read, nor write out the history. */
static bool
history_filename_empty (void)
{
return (history_filename == nullptr || *history_filename == '\0');
}
/* Implement 'show history filename'. */
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
static void
show_history_filename (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
if (!history_filename_empty ())
fprintf_filtered (file, _("The filename in which to record "
"the command history is \"%ps\".\n"),
styled_string (file_name_style.style (), value));
else
fprintf_filtered (file, _("There is no filename currently set for "
"recording the command history in.\n"));
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
}
1999-06-21 15:27:42 +02:00
/* This is like readline(), but it has some gdb-specific behavior.
gdb may want readline in both the synchronous and async modes during
a single gdb invocation. At the ordinary top-level prompt we might
be using the async readline. That means we can't use
rl_pre_input_hook, since it doesn't work properly in async mode.
However, for a secondary prompt (" >", such as occurs during a
`define'), gdb wants a synchronous response.
We used to call readline() directly, running it in synchronous
mode. But mixing modes this way is not supported, and as of
readline 5.x it no longer works; the arrow keys come unbound during
the synchronous call. So we make a nested call into the event
loop. That's what gdb_readline_wrapper is for. */
/* A flag set as soon as gdb_readline_wrapper_line is called; we can't
rely on gdb_readline_wrapper_result, which might still be NULL if
the user types Control-D for EOF. */
static int gdb_readline_wrapper_done;
/* The result of the current call to gdb_readline_wrapper, once a newline
is seen. */
static char *gdb_readline_wrapper_result;
/* Any intercepted hook. Operate-and-get-next sets this, expecting it
to be called after the newline is processed (which will redisplay
the prompt). But in gdb_readline_wrapper we will not get a new
prompt until the next call, or until we return to the event loop.
So we disable this hook around the newline and restore it before we
return. */
static void (*saved_after_char_processing_hook) (void);
/* See top.h. */
int
gdb_in_secondary_prompt_p (struct ui *ui)
{
return ui->secondary_prompt_depth > 0;
}
/* This function is called when readline has seen a complete line of
text. */
static void
gdb_readline_wrapper_line (gdb::unique_xmalloc_ptr<char> &&line)
{
gdb_assert (!gdb_readline_wrapper_done);
gdb_readline_wrapper_result = line.release ();
gdb_readline_wrapper_done = 1;
/* Prevent operate-and-get-next from acting too early. */
saved_after_char_processing_hook = after_char_processing_hook;
after_char_processing_hook = NULL;
/* Prevent parts of the prompt from being redisplayed if annotations
Background execution + pagination aborts readline/gdb If pagination occurs as result of output sent as response to a target event while the target is executing in the background, subsequent input aborts readline/gdb: $ gdb program ... (gdb) continue& Continuing. (gdb) ---Type <return> to continue, or q <return> to quit--- *return* ---Type <return> to continue, or q <return> to quit--- Breakpoint 2, after_sleep () at paginate-bg-execution.c:21 ---Type <return> to continue, or q <return> to quit--- 21 return; /* after sleep */ p 1 readline: readline_callback_read_char() called with no handler! *abort/SIGABRT* $ gdb_readline_wrapper_line removes the handler after a line is processed. Usually, we'll end up re-displaying the prompt, and that reinstalls the handler. But if the output is coming out of handling a stop event, we don't re-display the prompt, and nothing restores the handler. So the next input wakes up the event loop and calls into readline, which aborts. We should do better with the prompt handling while the target is running (I think we should coordinate with readline, and hide/redisplay it around output), but that's a more invasive change better done post 7.8, so this patch is conservative and just reinstalls the handler as soon as we're out of the readline line callback. gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c (gdb_readline_wrapper_line): Tweak comment. (gdb_readline_wrapper_cleanup): If readline is enabled, reinstall the input handler callback. gdb/testsuite/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * gdb.base/paginate-bg-execution.c: New file. * gdb.base/paginate-bg-execution.exp: New file.
2014-07-14 20:55:32 +02:00
are enabled, and readline's state getting out of sync. We'll
PR python/17372 - Python hangs when displaying help() This is more of a readline/terminal issue than a Python one. PR17372 is a regression in 7.8 caused by the fix for PR17072: commit 0017922d0292d8c374584f6100874580659c9973 Author: Pedro Alves <palves@redhat.com> Date: Mon Jul 14 19:55:32 2014 +0100 Background execution + pagination aborts readline/gdb gdb_readline_wrapper_line removes the handler after a line is processed. Usually, we'll end up re-displaying the prompt, and that reinstalls the handler. But if the output is coming out of handling a stop event, we don't re-display the prompt, and nothing restores the handler. So the next input wakes up the event loop and calls into readline, which aborts. ... gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c (gdb_readline_wrapper_line): Tweak comment. (gdb_readline_wrapper_cleanup): If readline is enabled, reinstall the input handler callback. The problem is that installing the input handler callback also preps the terminal, putting it in raw mode and with echo disabled, which is bad if we're going to call a command that assumes cooked/canonical mode, and echo enabled, like in the case of the PR, Python's interactive shell. Another example I came up with that doesn't depend on Python is starting a subshell with "(gdb) shell /bin/sh" from a multi-line command. Tests covering both these examples are added. The fix is to revert the original fix for PR gdb/17072, and instead restore the callback handler after processing an asynchronous target event. Furthermore, calling rl_callback_handler_install when we already have some input in readline's line buffer discards that input, which is obviously a bad thing to do while the user is typing. No specific test is added for that, because I first tried calling it even if the callback handler was still installed and that resulted in hundreds of failures in the testsuite. gdb/ 2014-10-29 Pedro Alves <palves@redhat.com> PR python/17372 * event-top.c (change_line_handler): Call gdb_rl_callback_handler_remove instead of rl_callback_handler_remove. (callback_handler_installed): New global. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): New functions. (display_gdb_prompt): Call gdb_rl_callback_handler_remove and gdb_rl_callback_handler_install instead of rl_callback_handler_remove and rl_callback_handler_install. (gdb_disable_readline): Call gdb_rl_callback_handler_remove instead of rl_callback_handler_remove. * event-top.h (gdb_rl_callback_handler_remove) (gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): New declarations. * infrun.c (reinstall_readline_callback_handler_cleanup): New cleanup function. (fetch_inferior_event): Install it. * top.c (gdb_readline_wrapper_line) Call gdb_rl_callback_handler_remove instead of rl_callback_handler_remove. (gdb_readline_wrapper_cleanup): Don't call rl_callback_handler_install. gdb/testsuite/ 2014-10-29 Pedro Alves <palves@redhat.com> PR python/17372 * gdb.python/python.exp: Test a multi-line command that spawns interactive Python. * gdb.base/multi-line-starts-subshell.exp: New file.
2014-10-23 18:13:35 +02:00
reinstall the callback handler, which puts the terminal in raw
mode (or in readline lingo, in prepped state), when we're next
ready to process user input, either in display_gdb_prompt, or if
we're handling an asynchronous target event and running in the
background, just before returning to the event loop to process
further input (or more target events). */
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
if (current_ui->command_editing)
PR python/17372 - Python hangs when displaying help() This is more of a readline/terminal issue than a Python one. PR17372 is a regression in 7.8 caused by the fix for PR17072: commit 0017922d0292d8c374584f6100874580659c9973 Author: Pedro Alves <palves@redhat.com> Date: Mon Jul 14 19:55:32 2014 +0100 Background execution + pagination aborts readline/gdb gdb_readline_wrapper_line removes the handler after a line is processed. Usually, we'll end up re-displaying the prompt, and that reinstalls the handler. But if the output is coming out of handling a stop event, we don't re-display the prompt, and nothing restores the handler. So the next input wakes up the event loop and calls into readline, which aborts. ... gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c (gdb_readline_wrapper_line): Tweak comment. (gdb_readline_wrapper_cleanup): If readline is enabled, reinstall the input handler callback. The problem is that installing the input handler callback also preps the terminal, putting it in raw mode and with echo disabled, which is bad if we're going to call a command that assumes cooked/canonical mode, and echo enabled, like in the case of the PR, Python's interactive shell. Another example I came up with that doesn't depend on Python is starting a subshell with "(gdb) shell /bin/sh" from a multi-line command. Tests covering both these examples are added. The fix is to revert the original fix for PR gdb/17072, and instead restore the callback handler after processing an asynchronous target event. Furthermore, calling rl_callback_handler_install when we already have some input in readline's line buffer discards that input, which is obviously a bad thing to do while the user is typing. No specific test is added for that, because I first tried calling it even if the callback handler was still installed and that resulted in hundreds of failures in the testsuite. gdb/ 2014-10-29 Pedro Alves <palves@redhat.com> PR python/17372 * event-top.c (change_line_handler): Call gdb_rl_callback_handler_remove instead of rl_callback_handler_remove. (callback_handler_installed): New global. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): New functions. (display_gdb_prompt): Call gdb_rl_callback_handler_remove and gdb_rl_callback_handler_install instead of rl_callback_handler_remove and rl_callback_handler_install. (gdb_disable_readline): Call gdb_rl_callback_handler_remove instead of rl_callback_handler_remove. * event-top.h (gdb_rl_callback_handler_remove) (gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): New declarations. * infrun.c (reinstall_readline_callback_handler_cleanup): New cleanup function. (fetch_inferior_event): Install it. * top.c (gdb_readline_wrapper_line) Call gdb_rl_callback_handler_remove instead of rl_callback_handler_remove. (gdb_readline_wrapper_cleanup): Don't call rl_callback_handler_install. gdb/testsuite/ 2014-10-29 Pedro Alves <palves@redhat.com> PR python/17372 * gdb.python/python.exp: Test a multi-line command that spawns interactive Python. * gdb.base/multi-line-starts-subshell.exp: New file.
2014-10-23 18:13:35 +02:00
gdb_rl_callback_handler_remove ();
}
class gdb_readline_wrapper_cleanup
{
public:
gdb_readline_wrapper_cleanup ()
: m_handler_orig (current_ui->input_handler),
m_already_prompted_orig (current_ui->command_editing
? rl_already_prompted : 0),
m_target_is_async_orig (target_is_async_p ()),
m_save_ui (&current_ui)
{
current_ui->input_handler = gdb_readline_wrapper_line;
current_ui->secondary_prompt_depth++;
if (m_target_is_async_orig)
target_async (0);
}
~gdb_readline_wrapper_cleanup ()
{
struct ui *ui = current_ui;
Background execution + pagination aborts readline/gdb If pagination occurs as result of output sent as response to a target event while the target is executing in the background, subsequent input aborts readline/gdb: $ gdb program ... (gdb) continue& Continuing. (gdb) ---Type <return> to continue, or q <return> to quit--- *return* ---Type <return> to continue, or q <return> to quit--- Breakpoint 2, after_sleep () at paginate-bg-execution.c:21 ---Type <return> to continue, or q <return> to quit--- 21 return; /* after sleep */ p 1 readline: readline_callback_read_char() called with no handler! *abort/SIGABRT* $ gdb_readline_wrapper_line removes the handler after a line is processed. Usually, we'll end up re-displaying the prompt, and that reinstalls the handler. But if the output is coming out of handling a stop event, we don't re-display the prompt, and nothing restores the handler. So the next input wakes up the event loop and calls into readline, which aborts. We should do better with the prompt handling while the target is running (I think we should coordinate with readline, and hide/redisplay it around output), but that's a more invasive change better done post 7.8, so this patch is conservative and just reinstalls the handler as soon as we're out of the readline line callback. gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c (gdb_readline_wrapper_line): Tweak comment. (gdb_readline_wrapper_cleanup): If readline is enabled, reinstall the input handler callback. gdb/testsuite/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * gdb.base/paginate-bg-execution.c: New file. * gdb.base/paginate-bg-execution.exp: New file.
2014-07-14 20:55:32 +02:00
if (ui->command_editing)
rl_already_prompted = m_already_prompted_orig;
Background execution + pagination aborts readline/gdb If pagination occurs as result of output sent as response to a target event while the target is executing in the background, subsequent input aborts readline/gdb: $ gdb program ... (gdb) continue& Continuing. (gdb) ---Type <return> to continue, or q <return> to quit--- *return* ---Type <return> to continue, or q <return> to quit--- Breakpoint 2, after_sleep () at paginate-bg-execution.c:21 ---Type <return> to continue, or q <return> to quit--- 21 return; /* after sleep */ p 1 readline: readline_callback_read_char() called with no handler! *abort/SIGABRT* $ gdb_readline_wrapper_line removes the handler after a line is processed. Usually, we'll end up re-displaying the prompt, and that reinstalls the handler. But if the output is coming out of handling a stop event, we don't re-display the prompt, and nothing restores the handler. So the next input wakes up the event loop and calls into readline, which aborts. We should do better with the prompt handling while the target is running (I think we should coordinate with readline, and hide/redisplay it around output), but that's a more invasive change better done post 7.8, so this patch is conservative and just reinstalls the handler as soon as we're out of the readline line callback. gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c (gdb_readline_wrapper_line): Tweak comment. (gdb_readline_wrapper_cleanup): If readline is enabled, reinstall the input handler callback. gdb/testsuite/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * gdb.base/paginate-bg-execution.c: New file. * gdb.base/paginate-bg-execution.exp: New file.
2014-07-14 20:55:32 +02:00
gdb_assert (ui->input_handler == gdb_readline_wrapper_line);
ui->input_handler = m_handler_orig;
/* Don't restore our input handler in readline yet. That would make
readline prep the terminal (putting it in raw mode), while the
line we just read may trigger execution of a command that expects
the terminal in the default cooked/canonical mode, such as e.g.,
running Python's interactive online help utility. See
gdb_readline_wrapper_line for when we'll reinstall it. */
gdb_readline_wrapper_result = NULL;
gdb_readline_wrapper_done = 0;
ui->secondary_prompt_depth--;
gdb_assert (ui->secondary_prompt_depth >= 0);
Remove the target from the event loop while in secondary prompts If a pagination prompt triggers while the target is running, and the target exits before the user responded to the pagination query, this happens: Starting program: foo ---Type <return> to continue, or q <return> to quit---No unwaited-for children left. Couldn't get registers: No such process. Couldn't get registers: No such process. Couldn't get registers: No such process. (gdb) Couldn't get registers: No such process. (gdb) To reiterate, the user hasn't replied to the pagination prompt above. A pagination query nests an event loop (in gdb_readline_wrapper). In async mode, in addition to stdin and signal handlers, we'll have the target also installed in the event loop still. So if the target reports an event, that wakes up the nested event loop, which calls into fetch_inferior_event etc. to handle the event which generates further output, all while we should be waiting for pagination confirmation... (TBC, any target event that generates output ends up spuriously waking up the pagination, though exits seem to be the worse kind.) I've played with a couple different approaches to fixing this, while at the same time trying to avoid being invasive. Both revolve around not listening to target events while in a pagination prompt (doing anything else I think would be a much bigger change). The approach taken just removes the target from the event loop while within gdb_readline_wrapper. The other approach used gdb_select directly, with only input_fd installed, but that had the issue that it didn't handle the async signal handlers, and turned out to be a bit more code than the first version. gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c: Include "inf-loop.h". (struct gdb_readline_wrapper_cleanup) <target_is_async_orig>: New field. (gdb_readline_wrapper_cleanup): Make the target async again, if it was async before. (gdb_readline_wrapper): Store whether the target is async, and make it sync. gdb/testsuite/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * gdb.base/paginate-inferior-exit.c: New file. * gdb.base/paginate-inferior-exit.exp: New file.
2014-07-14 20:55:32 +02:00
after_char_processing_hook = saved_after_char_processing_hook;
saved_after_char_processing_hook = NULL;
if (m_target_is_async_orig)
target_async (1);
}
DISABLE_COPY_AND_ASSIGN (gdb_readline_wrapper_cleanup);
private:
void (*m_handler_orig) (gdb::unique_xmalloc_ptr<char> &&);
int m_already_prompted_orig;
Remove the target from the event loop while in secondary prompts If a pagination prompt triggers while the target is running, and the target exits before the user responded to the pagination query, this happens: Starting program: foo ---Type <return> to continue, or q <return> to quit---No unwaited-for children left. Couldn't get registers: No such process. Couldn't get registers: No such process. Couldn't get registers: No such process. (gdb) Couldn't get registers: No such process. (gdb) To reiterate, the user hasn't replied to the pagination prompt above. A pagination query nests an event loop (in gdb_readline_wrapper). In async mode, in addition to stdin and signal handlers, we'll have the target also installed in the event loop still. So if the target reports an event, that wakes up the nested event loop, which calls into fetch_inferior_event etc. to handle the event which generates further output, all while we should be waiting for pagination confirmation... (TBC, any target event that generates output ends up spuriously waking up the pagination, though exits seem to be the worse kind.) I've played with a couple different approaches to fixing this, while at the same time trying to avoid being invasive. Both revolve around not listening to target events while in a pagination prompt (doing anything else I think would be a much bigger change). The approach taken just removes the target from the event loop while within gdb_readline_wrapper. The other approach used gdb_select directly, with only input_fd installed, but that had the issue that it didn't handle the async signal handlers, and turned out to be a bit more code than the first version. gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c: Include "inf-loop.h". (struct gdb_readline_wrapper_cleanup) <target_is_async_orig>: New field. (gdb_readline_wrapper_cleanup): Make the target async again, if it was async before. (gdb_readline_wrapper): Store whether the target is async, and make it sync. gdb/testsuite/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * gdb.base/paginate-inferior-exit.c: New file. * gdb.base/paginate-inferior-exit.exp: New file.
2014-07-14 20:55:32 +02:00
/* Whether the target was async. */
int m_target_is_async_orig;
new-ui command: gdb internal errors if input is already pending I noticed that if input is already pending on the new-ui TTY, gdb internal-errors. E.g., create /dev/pts/2, and type anything there (even just <return> is sufficient). Now start GDB creating a new UI on that TTY, while at the same time, running a synchronous execution command. Something like: $ gdb program -ex "new-ui console /dev/pts/2" -ex "start" Back on /dev/pts/2, we get: (gdb) .../src/gdb/event-top.c:360: internal-error: double prompt A problem internal to GDB has been detected, further debugging may prove unreliable. While the main UI was waiting for "start" to finish, gdb kepts pumping events, including the input fd of the extra console. The problem is that stdin_event_handler doesn't restore the current UI back to what it was, assuming that it's only ever called from the top level event loop. However, in this case, it's being called from the nested event loop from within maybe_wait_sync_command_done. When finally the "start" command is done, we reach the code that prints the prompt in the main UI, just before starting the main event loop. Since now the current UI is pointing at the extra console (by mistake), we find ourselves printing a double prompt on the extra console. This is caught by the assertion that fails, as shown above. Since other event handlers also don't restore the UI (e.g., signal event handlers), I think it's better if whatever is pumping events to take care to restore the UI, if it cares. That's what this patch does. New test included. gdb/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * top.c (wait_sync_command_done): Don't assume current_ui doesn't change across events. Restore the current UI before returning. (gdb_readline_wrapper): Restore the current UI before returning. gdb/testsuite/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * gdb.base/new-ui-pending-input.c: New file. * gdb.base/new-ui-pending-input.exp: New file. * gdb.exp (clear_gdb_spawn_id): New procedure. (with_spawn_id): Check whether gdb_spawn_id exists before referencing it. If gdb_spawn_id didn't exist on entry, clear it on exit.
2016-09-07 00:29:25 +02:00
/* Processing events may change the current UI. */
scoped_restore_tmpl<struct ui *> m_save_ui;
};
char *
gdb_readline_wrapper (const char *prompt)
{
struct ui *ui = current_ui;
new-ui command: gdb internal errors if input is already pending I noticed that if input is already pending on the new-ui TTY, gdb internal-errors. E.g., create /dev/pts/2, and type anything there (even just <return> is sufficient). Now start GDB creating a new UI on that TTY, while at the same time, running a synchronous execution command. Something like: $ gdb program -ex "new-ui console /dev/pts/2" -ex "start" Back on /dev/pts/2, we get: (gdb) .../src/gdb/event-top.c:360: internal-error: double prompt A problem internal to GDB has been detected, further debugging may prove unreliable. While the main UI was waiting for "start" to finish, gdb kepts pumping events, including the input fd of the extra console. The problem is that stdin_event_handler doesn't restore the current UI back to what it was, assuming that it's only ever called from the top level event loop. However, in this case, it's being called from the nested event loop from within maybe_wait_sync_command_done. When finally the "start" command is done, we reach the code that prints the prompt in the main UI, just before starting the main event loop. Since now the current UI is pointing at the extra console (by mistake), we find ourselves printing a double prompt on the extra console. This is caught by the assertion that fails, as shown above. Since other event handlers also don't restore the UI (e.g., signal event handlers), I think it's better if whatever is pumping events to take care to restore the UI, if it cares. That's what this patch does. New test included. gdb/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * top.c (wait_sync_command_done): Don't assume current_ui doesn't change across events. Restore the current UI before returning. (gdb_readline_wrapper): Restore the current UI before returning. gdb/testsuite/ChangeLog: 2016-09-06 Pedro Alves <palves@redhat.com> * gdb.base/new-ui-pending-input.c: New file. * gdb.base/new-ui-pending-input.exp: New file. * gdb.exp (clear_gdb_spawn_id): New procedure. (with_spawn_id): Check whether gdb_spawn_id exists before referencing it. If gdb_spawn_id didn't exist on entry, clear it on exit.
2016-09-07 00:29:25 +02:00
gdb_readline_wrapper_cleanup cleanup;
Remove the target from the event loop while in secondary prompts If a pagination prompt triggers while the target is running, and the target exits before the user responded to the pagination query, this happens: Starting program: foo ---Type <return> to continue, or q <return> to quit---No unwaited-for children left. Couldn't get registers: No such process. Couldn't get registers: No such process. Couldn't get registers: No such process. (gdb) Couldn't get registers: No such process. (gdb) To reiterate, the user hasn't replied to the pagination prompt above. A pagination query nests an event loop (in gdb_readline_wrapper). In async mode, in addition to stdin and signal handlers, we'll have the target also installed in the event loop still. So if the target reports an event, that wakes up the nested event loop, which calls into fetch_inferior_event etc. to handle the event which generates further output, all while we should be waiting for pagination confirmation... (TBC, any target event that generates output ends up spuriously waking up the pagination, though exits seem to be the worse kind.) I've played with a couple different approaches to fixing this, while at the same time trying to avoid being invasive. Both revolve around not listening to target events while in a pagination prompt (doing anything else I think would be a much bigger change). The approach taken just removes the target from the event loop while within gdb_readline_wrapper. The other approach used gdb_select directly, with only input_fd installed, but that had the issue that it didn't handle the async signal handlers, and turned out to be a bit more code than the first version. gdb/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * top.c: Include "inf-loop.h". (struct gdb_readline_wrapper_cleanup) <target_is_async_orig>: New field. (gdb_readline_wrapper_cleanup): Make the target async again, if it was async before. (gdb_readline_wrapper): Store whether the target is async, and make it sync. gdb/testsuite/ 2014-07-14 Pedro Alves <palves@redhat.com> PR gdb/17072 * gdb.base/paginate-inferior-exit.c: New file. * gdb.base/paginate-inferior-exit.exp: New file.
2014-07-14 20:55:32 +02:00
Fix PR 21218: GDB dumps core when escaping newline in multi-line command With commit 3b12939dfc2399 ("Replace the sync_execution global with a new enum prompt_state tristate"), GDB started aborting if you try splitting an input line with a continuation char (backslash) while in a multi-line command: (gdb) commands Type commands for breakpoint(s) 1, one per line. End with a line saying just "end". >print \ (gdb) 1 # note "(gdb)" incorrectly printed here. >end readline: readline_callback_read_char() called with no handler! $ That abort is actually a symptom of an old problem introduced when gdb_readline_wrapper was rewritten to use asynchronous readline, back in 2007. Note how the "(gdb)" prompt is printed above in the "(gdb) 1" line. Clearly it shouldn't be there, but it already was before the commit mentioned above. Fixing that also fixes the readline abort shown above. The problem starts when command_line_input passes a NULL prompt to gdb_readline_wrapper when it finds previous incomplete input due to a backslash, trying to fetch more input without printing another ">" secondary prompt. That itself should not be a problem, because passing NULL to gdb_readline_wrapper has the same meaning as passing a pointer to empty string, since gdb_readline_wrapper exposes the same interface as 'readline(char *)'. However, gdb_readline_wrapper passes the prompt argument directly to display_gdb_prompt, and for the latter, a NULL prompt argument has a different meaning - it requests printing the primary prompt. Before commit 782a7b8ef9c096 (which rewrote gdb_readline_wrapper to use asynchronous readline), GDB behaved like this: (gdb) commands [....] >print \ 1 >end (gdb) The above is what this commit restores GDB back to. New test included. gdb/ChangeLog: 2017-03-08 Pedro Alves <palves@redhat.com> PR cli/21218 * top.c (gdb_readline_wrapper): Avoid passing NULL to display_gdb_prompt. (command_line_input): Add comment. gdb/testsuite/ChangeLog: 2017-03-08 Pedro Alves <palves@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> PR cli/21218 * gdb.base/commands.exp (backslash_in_multi_line_command_test): New proc. (top level): Call it.
2017-03-08 12:41:35 +01:00
/* Display our prompt and prevent double prompt display. Don't pass
down a NULL prompt, since that has special meaning for
display_gdb_prompt -- it indicates a request to print the primary
prompt, while we want a secondary prompt here. */
display_gdb_prompt (prompt != NULL ? prompt : "");
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
if (ui->command_editing)
rl_already_prompted = 1;
if (after_char_processing_hook)
(*after_char_processing_hook) ();
gdb_assert (after_char_processing_hook == NULL);
while (gdb_do_one_event () >= 0)
if (gdb_readline_wrapper_done)
break;
return gdb_readline_wrapper_result;
}
1999-06-21 15:27:42 +02:00
/* The current saved history number from operate-and-get-next.
This is -1 if not valid. */
static int operate_saved_history = -1;
/* This is put on the appropriate hook and helps operate-and-get-next
do its work. */
2003-06-08 Andrew Cagney <cagney@redhat.com> * acinclude.m4 (gcc_AC_CHECK_DECL, (gcc_AC_CHECK_DECL): Stolen from GCC's acinclude.m4. * configure.in: Check for getopt's delcaration. * aclocal.m4, config.in, configure: Re-generate. * main.c (error_init): Delete declaration. * defs.h (error_init): Declare. * rs6000-tdep.c (rs6000_fetch_pointer_argument): Make static. (rs6000_convert_from_func_ptr_addr): Make static. (_initialize_rs6000_tdep): Add declaration. * cli/cli-cmds.c (dont_repeat): Delete declaration. (show_commands, set_verbose, show_history): Delete declaration. * top.h (set_verbose): Add declaration. (show_history, set_history, show_commands): Add declaration. (do_restore_instream_cleanup): Add declaration. * objc-lang.c (specialcmp): Make static. (print_object_command): Make static. (find_objc_msgsend): Make static. (find_objc_msgcall_submethod_helper): Make static. (find_objc_msgcall_submethod): Make static. (_initialize_objc_language): Add declaration. (find_implementation_from_class): Make static. (find_implementation): Make static. * objc-exp.y (yylex): Delete lookup_struct_typedef declaration. * objc-lang.h (lookup_struct_typedef): Add declaration. * cli/cli-interp.c (_initialize_cli_interp): Add declaration. * cli/cli-script.c (clear_hook_in_cleanup): Make static. (do_restore_user_call_depth): Make static. (do_restore_instream_cleanup): Delete declaration. (dont_repeat): Delete declaration. * cli/cli-decode.c (add_abbrev_cmd): Delete function. * cli/cli-dump.c (_initialize_cli_dump): Add declaration. * reggroups.c (_initialize_reggroup): Add declaration. * cp-support.c (_initialize_cp_support): Add declaration. * cp-abi.c (_initialize_cp_abi): Add declaration. * hpacc-abi.c (_initialize_hpacc_abi): Add declaration. * gnu-v3-abi.c (gnuv3_baseclass_offset): Make static. (_initialize_gnu_v3_abi): Add declaration. * gnu-v2-abi.c (gnuv2_value_rtti_type): Make static. (_initialize_gnu_v2_abi): Add declaration. * frame-base.c (_initialize_frame_base): Add declaration. * doublest.c (floatformat_from_length): Make static. * frame-unwind.c (_initialize_frame_unwind): Add declaration. * frame.c (create_sentinel_frame): Make static. (_initialize_frame): Add declaration. * top.c (do_catch_errors): Make static. (gdb_rl_operate_and_get_next_completion): Make static. * typeprint.c: Include "typeprint.h". * sentinel-frame.c (sentinel_frame_prev_register): Make static. (sentinel_frame_this_id): Make static. * p-valprint.c (_initialize_pascal_valprint): Add declaration. * ui-out.c (make_cleanup_ui_out_begin_end): Delete function. * dwarf2-frame.c (dwarf2_frame_cache): Make static. * p-exp.y (push_current_type, pop_current_type): ISO C declaration. * dwarf2expr.h (dwarf_expr_context): ISO C declaration. * maint.c (maintenance_print_architecture): Make static. * signals/signals.c (_initialize_signals): Add declaration. * std-regs.c (_initialize_frame_reg): Add declaration. * jv-exp.y (push_variable): ISO C definition. (push_qualified_expression_name): Ditto. * memattr.c (_initialize_mem): Add declaration. * remote.c (remote_check_watch_resources): Make static. (remote_stopped_by_watchpoint): Make static. (remote_stopped_data_address): Make static. * d10v-tdep.c (nr_dmap_regs): Make static. (a0_regnum): Make static. (d10v_frame_unwind_cache): Make static. (d10v_frame_p): Make static. * osabi.c (show_osabi): Make static. (_initialize_gdb_osabi): Add extern declaration. * gdbtypes.c (make_qualified_type): Make static. (safe_parse_type): Make static. * macrocmd.c (_initialize_macrocmd): Add extern declaration. * macrotab.c (macro_bcache_free): Make static. * interps.c (interp_set_quiet): Make static. (interpreter_exec_cmd): Make static. * stack.h (select_frame_command): New file. * stack.c: Include "stack.h". (select_frame_command_wrapper): Delete function. (select_frame_command): Make global. * infcall.c: Include "infcall.h". * linespec.c: Include "linespec.h". * symfile.c (sections_overlap): Make static. * cp-support.h (cp_initialize_namespace): ISO C declaration. * charset.c (_initialize_charset): Add missing prototype. * regcache.c (init_legacy_regcache_descr): Make static. (do_regcache_xfree): Make static. (regcache_xfer_part): Make static. (_initialize_regcache): Add missing prototype. * breakpoint.c (parse_breakpoint_sals): Make static. (breakpoint_sals_to_pc): Make static. * interps.h (clear_interpreter_hooks): ISO C declaration. * Makefile.in (stack_h): Define. (stack.o, typeprint.o, mi-main.o): Update dependencies. (mi-cmd-stack.o, infcall.o, linespec.o): Update dependencies. Index: mi/ChangeLog 2003-06-08 Andrew Cagney <cagney@redhat.com> * mi-parse.c (_initialize_mi_parse): Delete function. * mi-main.c: Include "mi-main.h". * mi-interp.c (_initialize_mi_interp): Add declaration. * mi-cmd-stack.c: Include "stack.h". (select_frame_command_wrapper): Delete extern declaration. (mi_cmd_stack_select_frame): Replace select_frame_command_wrapper with select_frame_command.
2003-06-08 20:27:14 +02:00
static void
2002-07-11 15:50:50 +02:00
gdb_rl_operate_and_get_next_completion (void)
{
int delta = where_history () - operate_saved_history;
/* The `key' argument to rl_get_previous_history is ignored. */
rl_get_previous_history (delta, 0);
operate_saved_history = -1;
/* readline doesn't automatically update the display for us. */
2008-03-23 18:29:34 +01:00
rl_redisplay ();
after_char_processing_hook = NULL;
rl_pre_input_hook = NULL;
}
/* This is a gdb-local readline command handler. It accepts the
current command line (like RET does) and, if this command was taken
from the history, arranges for the next command in the history to
appear on the command line when the prompt returns.
We ignore the arguments. */
static int
gdb_rl_operate_and_get_next (int count, int key)
{
int where;
/* Use the async hook. */
after_char_processing_hook = gdb_rl_operate_and_get_next_completion;
/* Find the current line, and find the next line to use. */
where = where_history();
if ((history_is_stifled () && (history_length >= history_max_entries))
|| (where >= history_length - 1))
operate_saved_history = where;
else
operate_saved_history = where + 1;
return rl_newline (1, key);
}
/* Number of user commands executed during this session. */
static int command_count = 0;
/* Add the user command COMMAND to the input history list. */
void
gdb_add_history (const char *command)
{
command_count++;
2015-06-03 04:49:15 +02:00
if (history_remove_duplicates != 0)
{
int lookbehind;
int lookbehind_threshold;
/* The lookbehind threshold for finding a duplicate history entry is
bounded by command_count because we can't meaningfully delete
history entries that are already stored in the history file since
the history file is appended to. */
if (history_remove_duplicates == -1
|| history_remove_duplicates > command_count)
lookbehind_threshold = command_count;
else
lookbehind_threshold = history_remove_duplicates;
using_history ();
for (lookbehind = 0; lookbehind < lookbehind_threshold; lookbehind++)
{
HIST_ENTRY *temp = previous_history ();
if (temp == NULL)
break;
if (strcmp (temp->line, command) == 0)
{
HIST_ENTRY *prev = remove_history (where_history ());
command_count--;
free_history_entry (prev);
break;
}
}
using_history ();
}
add_history (command);
}
/* Safely append new history entries to the history file in a corruption-free
way using an intermediate local history file. */
static void
gdb_safe_append_history (void)
{
int ret, saved_errno;
std::string local_history_filename
= string_printf ("%s-gdb%ld~", history_filename, (long) getpid ());
ret = rename (history_filename, local_history_filename.c_str ());
saved_errno = errno;
if (ret < 0 && saved_errno != ENOENT)
{
warning (_("Could not rename %ps to %ps: %s"),
styled_string (file_name_style.style (), history_filename),
styled_string (file_name_style.style (),
local_history_filename.c_str ()),
safe_strerror (saved_errno));
}
else
{
if (ret < 0)
{
/* If the rename failed with ENOENT then either the global history
file never existed in the first place or another GDB process is
currently appending to it (and has thus temporarily renamed it).
Since we can't distinguish between these two cases, we have to
conservatively assume the first case and therefore must write out
(not append) our known history to our local history file and try
to move it back anyway. Otherwise a global history file would
never get created! */
gdb_assert (saved_errno == ENOENT);
write_history (local_history_filename.c_str ());
}
else
{
append_history (command_count, local_history_filename.c_str ());
if (history_is_stifled ())
history_truncate_file (local_history_filename.c_str (),
history_max_entries);
}
ret = rename (local_history_filename.c_str (), history_filename);
saved_errno = errno;
if (ret < 0 && saved_errno != EEXIST)
warning (_("Could not rename %s to %s: %s"),
local_history_filename.c_str (), history_filename,
safe_strerror (saved_errno));
}
}
/* Read one line from the command input stream `instream' into a local
static buffer. The buffer is made bigger as necessary. Returns
the address of the start of the line.
1999-06-21 15:27:42 +02:00
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
NULL is returned for end of file.
1999-06-21 15:27:42 +02:00
This routine either uses fancy command line editing or simple input
as the user has requested. */
2000-10-31 06:49:55 +01:00
const char *
command_line_input (const char *prompt_arg, const char *annotation_suffix)
1999-06-21 15:27:42 +02:00
{
static struct buffer cmd_line_buffer;
static int cmd_line_buffer_initialized;
struct ui *ui = current_ui;
Fix build with Python 3.4 (PR python/16784) The type of the function pointer PyOS_ReadlineFunctionPointer (part of the Python C API), which we use, slightly changed starting with Python 3.4. The signature went from PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, char *); to PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, const char *); The parameter that changed is the prompt text. This commits adjust gdb accordingly by making the prompt_arg parameter const, as well as the fallouts of that. I needed to rework how annotations are added to the prompt, since the it is now const. If annotations are enabled, it will make a copy of the prompt overwrite the prompt variable that is used throughout the function. Otherwise, no copy is done and the original prompt_arg value is passed. I changed the signature of deprecated_readline_hook. I would've changed any user of it, but it seems like nothing is using it, Built-tested with python 2.7.x, 3.3.y and 3.4.z. gdb/ChangeLog: * defs.h (gdb_readline): Constify argument. (gdb_readline_wrapper): Same. (command_line_input): Same. (deprecated_readline_hook): Same. * top.c (deprecated_readline_hook): Same. (gdb_readline): Same. (gdb_readline_wrapper): Same. (command_line_input): Constify argument. Pass prompt to called functions instead of local_prompt, overwriting prompt if using annotations. * event-top.h (display_gdb_prompt): Constify argument. * event-top.c (display_gdb_prompt): Same. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Constify argument if building with Python 3.4 and up. Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
2014-12-15 17:38:03 +01:00
const char *prompt = prompt_arg;
char *cmd;
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
int from_tty = ui->instream == ui->stdin_stream;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
/* The annotation suffix must be non-NULL. */
if (annotation_suffix == NULL)
annotation_suffix = "";
1999-06-21 15:27:42 +02:00
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
if (from_tty && annotation_level > 1)
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
{
Fix build with Python 3.4 (PR python/16784) The type of the function pointer PyOS_ReadlineFunctionPointer (part of the Python C API), which we use, slightly changed starting with Python 3.4. The signature went from PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, char *); to PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, const char *); The parameter that changed is the prompt text. This commits adjust gdb accordingly by making the prompt_arg parameter const, as well as the fallouts of that. I needed to rework how annotations are added to the prompt, since the it is now const. If annotations are enabled, it will make a copy of the prompt overwrite the prompt variable that is used throughout the function. Otherwise, no copy is done and the original prompt_arg value is passed. I changed the signature of deprecated_readline_hook. I would've changed any user of it, but it seems like nothing is using it, Built-tested with python 2.7.x, 3.3.y and 3.4.z. gdb/ChangeLog: * defs.h (gdb_readline): Constify argument. (gdb_readline_wrapper): Same. (command_line_input): Same. (deprecated_readline_hook): Same. * top.c (deprecated_readline_hook): Same. (gdb_readline): Same. (gdb_readline_wrapper): Same. (command_line_input): Constify argument. Pass prompt to called functions instead of local_prompt, overwriting prompt if using annotations. * event-top.h (display_gdb_prompt): Constify argument. * event-top.c (display_gdb_prompt): Same. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Constify argument if building with Python 3.4 and up. Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
2014-12-15 17:38:03 +01:00
char *local_prompt;
Add casts to memory allocation related calls Most allocation functions (if not all) return a void* pointing to the allocated memory. In C++, we need to add an explicit cast when assigning the result to a pointer to another type (which is the case more often than not). The content of this patch is taken from Pedro's branch, from commit "(mostly) auto-generated patch to insert casts needed for C++". I validated that the changes make sense and manually reflowed the code to make it respect the coding style. I also found multiple places where I could use XNEW/XNEWVEC/XRESIZEVEC/etc. Thanks a lot to whoever did that automated script to insert casts, doing it completely by hand would have taken a ridiculous amount of time. Only files built on x86 with --enable-targets=all are modified. This means that all other -nat.c files are untouched and will have to be dealt with later by using appropiate compilers. Or maybe we can try to build them with a regular g++ just to know where to add casts, I don't know. I built-tested this with --enable-targets=all and reg-tested. Here's the changelog entry, which was not too bad to make despite the size, thanks to David Malcom's script. I fixed some bits by hand, but there might be some wrong parts left (hopefully not). gdb/ChangeLog: * aarch64-linux-tdep.c (aarch64_stap_parse_special_token): Add cast to allocation result assignment. * ada-exp.y (write_object_renaming): Likewise. (write_ambiguous_var): Likewise. (ada_nget_field_index): Likewise. (write_var_or_type): Likewise. * ada-lang.c (ada_decode_symbol): Likewise. (ada_value_assign): Likewise. (value_pointer): Likewise. (cache_symbol): Likewise. (add_nonlocal_symbols): Likewise. (ada_name_for_lookup): Likewise. (symbol_completion_add): Likewise. (ada_to_fixed_type_1): Likewise. (ada_get_next_arg): Likewise. (defns_collected): Likewise. * ada-lex.l (processId): Likewise. (processString): Likewise. * ada-tasks.c (read_known_tasks_array): Likewise. (read_known_tasks_list): Likewise. * ada-typeprint.c (decoded_type_name): Likewise. * addrmap.c (addrmap_mutable_create_fixed): Likewise. * amd64-tdep.c (amd64_push_arguments): Likewise. (amd64_displaced_step_copy_insn): Likewise. (amd64_classify_insn_at): Likewise. (amd64_relocate_instruction): Likewise. * amd64obsd-tdep.c (amd64obsd_sigtramp_p): Likewise. * arch-utils.c (simple_displaced_step_copy_insn): Likewise. (initialize_current_architecture): Likewise. * arm-linux-tdep.c (arm_stap_parse_special_token): Likewise. * arm-symbian-tdep.c (arm_symbian_osabi_sniffer): Likewise. * arm-tdep.c (arm_exidx_new_objfile): Likewise. (arm_push_dummy_call): Likewise. (extend_buffer_earlier): Likewise. (arm_adjust_breakpoint_address): Likewise. (arm_skip_stub): Likewise. * auto-load.c (filename_is_in_pattern): Likewise. (maybe_add_script_file): Likewise. (maybe_add_script_text): Likewise. (auto_load_objfile_script_1): Likewise. * auxv.c (ld_so_xfer_auxv): Likewise. * ax-general.c (new_agent_expr): Likewise. (grow_expr): Likewise. (ax_reg_mask): Likewise. * bcache.c (bcache_full): Likewise. * breakpoint.c (program_breakpoint_here_p): Likewise. * btrace.c (parse_xml_raw): Likewise. * build-id.c (build_id_to_debug_bfd): Likewise. * buildsym.c (end_symtab_with_blockvector): Likewise. * c-exp.y (string_exp): Likewise. (qualified_name): Likewise. (write_destructor_name): Likewise. (operator_stoken): Likewise. (parse_number): Likewise. (scan_macro_expansion): Likewise. (yylex): Likewise. (c_print_token): Likewise. * c-lang.c (c_get_string): Likewise. (emit_numeric_character): Likewise. * charset.c (wchar_iterate): Likewise. * cli/cli-cmds.c (complete_command): Likewise. (make_command): Likewise. * cli/cli-dump.c (restore_section_callback): Likewise. (restore_binary_file): Likewise. * cli/cli-interp.c (cli_interpreter_exec): Likewise. * cli/cli-script.c (execute_control_command): Likewise. * cli/cli-setshow.c (do_set_command): Likewise. * coff-pe-read.c (add_pe_forwarded_sym): Likewise. (read_pe_exported_syms): Likewise. * coffread.c (coff_read_struct_type): Likewise. (coff_read_enum_type): Likewise. * common/btrace-common.c (btrace_data_append): Likewise. * common/buffer.c (buffer_grow): Likewise. * common/filestuff.c (gdb_fopen_cloexec): Likewise. * common/format.c (parse_format_string): Likewise. * common/gdb_vecs.c (delim_string_to_char_ptr_vec_append): Likewise. * common/xml-utils.c (xml_escape_text): Likewise. * compile/compile-object-load.c (copy_sections): Likewise. (compile_object_load): Likewise. * compile/compile-object-run.c (compile_object_run): Likewise. * completer.c (filename_completer): Likewise. * corefile.c (read_memory_typed_address): Likewise. (write_memory_unsigned_integer): Likewise. (write_memory_signed_integer): Likewise. (complete_set_gnutarget): Likewise. * corelow.c (get_core_register_section): Likewise. * cp-name-parser.y (d_grab): Likewise. (allocate_info): Likewise. (cp_new_demangle_parse_info): Likewise. * cp-namespace.c (cp_scan_for_anonymous_namespaces): Likewise. (cp_lookup_symbol_in_namespace): Likewise. (lookup_namespace_scope): Likewise. (find_symbol_in_baseclass): Likewise. (cp_lookup_nested_symbol): Likewise. (cp_lookup_transparent_type_loop): Likewise. * cp-support.c (copy_string_to_obstack): Likewise. (make_symbol_overload_list): Likewise. (make_symbol_overload_list_namespace): Likewise. (make_symbol_overload_list_adl_namespace): Likewise. (first_component_command): Likewise. * cp-valprint.c (cp_print_value): Likewise. * ctf.c (ctf_xfer_partial): Likewise. * d-exp.y (StringExp): Likewise. * d-namespace.c (d_lookup_symbol_in_module): Likewise. (lookup_module_scope): Likewise. (find_symbol_in_baseclass): Likewise. (d_lookup_nested_symbol): Likewise. * dbxread.c (find_stab_function_addr): Likewise. (read_dbx_symtab): Likewise. (dbx_end_psymtab): Likewise. (cp_set_block_scope): Likewise. * dcache.c (dcache_alloc): Likewise. * demangle.c (_initialize_demangler): Likewise. * dicos-tdep.c (dicos_load_module_p): Likewise. * dictionary.c (dict_create_hashed_expandable): Likewise. (dict_create_linear_expandable): Likewise. (expand_hashtable): Likewise. (add_symbol_linear_expandable): Likewise. * dwarf2-frame.c (add_cie): Likewise. (add_fde): Likewise. (dwarf2_build_frame_info): Likewise. * dwarf2expr.c (dwarf_expr_grow_stack): Likewise. (dwarf_expr_fetch_address): Likewise. (add_piece): Likewise. (execute_stack_op): Likewise. * dwarf2loc.c (chain_candidate): Likewise. (dwarf_entry_parameter_to_value): Likewise. (read_pieced_value): Likewise. (write_pieced_value): Likewise. * dwarf2read.c (dwarf2_read_section): Likewise. (add_type_unit): Likewise. (read_comp_units_from_section): Likewise. (fixup_go_packaging): Likewise. (dwarf2_compute_name): Likewise. (dwarf2_physname): Likewise. (create_dwo_unit_in_dwp_v1): Likewise. (create_dwo_unit_in_dwp_v2): Likewise. (read_func_scope): Likewise. (read_call_site_scope): Likewise. (dwarf2_attach_fields_to_type): Likewise. (process_structure_scope): Likewise. (mark_common_block_symbol_computed): Likewise. (read_common_block): Likewise. (abbrev_table_read_table): Likewise. (guess_partial_die_structure_name): Likewise. (fixup_partial_die): Likewise. (add_file_name): Likewise. (dwarf2_const_value_data): Likewise. (dwarf2_const_value_attr): Likewise. (build_error_marker_type): Likewise. (guess_full_die_structure_name): Likewise. (anonymous_struct_prefix): Likewise. (typename_concat): Likewise. (dwarf2_canonicalize_name): Likewise. (dwarf2_name): Likewise. (write_constant_as_bytes): Likewise. (dwarf2_fetch_constant_bytes): Likewise. (copy_string): Likewise. (parse_macro_definition): Likewise. * elfread.c (elf_symfile_segments): Likewise. (elf_rel_plt_read): Likewise. (elf_gnu_ifunc_resolve_by_cache): Likewise. (elf_gnu_ifunc_resolve_by_got): Likewise. (elf_read_minimal_symbols): Likewise. (elf_gnu_ifunc_record_cache): Likewise. * event-top.c (top_level_prompt): Likewise. (command_line_handler): Likewise. * exec.c (resize_section_table): Likewise. * expprint.c (print_subexp_standard): Likewise. * fbsd-tdep.c (fbsd_collect_regset_section_cb): Likewise. * findcmd.c (parse_find_args): Likewise. * findvar.c (address_from_register): Likewise. * frame.c (get_prev_frame_always): Likewise. * gdb_bfd.c (gdb_bfd_ref): Likewise. (get_section_descriptor): Likewise. * gdb_obstack.c (obconcat): Likewise. (obstack_strdup): Likewise. * gdbtypes.c (lookup_function_type_with_arguments): Likewise. (create_set_type): Likewise. (lookup_unsigned_typename): Likewise. (lookup_signed_typename): Likewise. (resolve_dynamic_union): Likewise. (resolve_dynamic_struct): Likewise. (add_dyn_prop): Likewise. (copy_dynamic_prop_list): Likewise. (arch_flags_type): Likewise. (append_composite_type_field_raw): Likewise. * gdbtypes.h (INIT_FUNC_SPECIFIC): Likewise. * gnu-v3-abi.c (gnuv3_rtti_type): Likewise. * go-exp.y (string_exp): Likewise. * go-lang.c (go_demangle): Likewise. * guile/guile.c (compute_scheme_string): Likewise. * guile/scm-cmd.c (gdbscm_parse_command_name): Likewise. (gdbscm_canonicalize_command_name): Likewise. * guile/scm-ports.c (ioscm_init_stdio_buffers): Likewise. (ioscm_init_memory_port): Likewise. (ioscm_reinit_memory_port): Likewise. * guile/scm-utils.c (gdbscm_gc_xstrdup): Likewise. (gdbscm_gc_dup_argv): Likewise. * h8300-tdep.c (h8300_push_dummy_call): Likewise. * hppa-tdep.c (internalize_unwinds): Likewise. (read_unwind_info): Likewise. * i386-cygwin-tdep.c (core_process_module_section): Likewise. (windows_core_xfer_shared_libraries): Likewise. * i386-tdep.c (i386_displaced_step_copy_insn): Likewise. (i386_stap_parse_special_token_triplet): Likewise. (i386_stap_parse_special_token_three_arg_disp): Likewise. * i386obsd-tdep.c (i386obsd_sigtramp_p): Likewise. * inf-child.c (inf_child_fileio_readlink): Likewise. * inf-ptrace.c (inf_ptrace_fetch_register): Likewise. (inf_ptrace_store_register): Likewise. * infrun.c (follow_exec): Likewise. (displaced_step_prepare_throw): Likewise. (save_stop_context): Likewise. (save_infcall_suspend_state): Likewise. * jit.c (jit_read_descriptor): Likewise. (jit_read_code_entry): Likewise. (jit_symtab_line_mapping_add_impl): Likewise. (finalize_symtab): Likewise. (jit_unwind_reg_get_impl): Likewise. * jv-exp.y (QualifiedName): Likewise. * jv-lang.c (get_java_utf8_name): Likewise. (type_from_class): Likewise. (java_demangle_type_signature): Likewise. (java_class_name_from_physname): Likewise. * jv-typeprint.c (java_type_print_base): Likewise. * jv-valprint.c (java_value_print): Likewise. * language.c (add_language): Likewise. * linespec.c (add_sal_to_sals_basic): Likewise. (add_sal_to_sals): Likewise. (decode_objc): Likewise. (find_linespec_symbols): Likewise. * linux-fork.c (fork_save_infrun_state): Likewise. * linux-nat.c (linux_nat_detach): Likewise. (linux_nat_fileio_readlink): Likewise. * linux-record.c (record_linux_sockaddr): Likewise. (record_linux_msghdr): Likewise. (Do): Likewise. * linux-tdep.c (linux_core_info_proc_mappings): Likewise. (linux_collect_regset_section_cb): Likewise. (linux_get_siginfo_data): Likewise. * linux-thread-db.c (try_thread_db_load_from_pdir_1): Likewise. (try_thread_db_load_from_dir): Likewise. (thread_db_load_search): Likewise. (info_auto_load_libthread_db): Likewise. * m32c-tdep.c (m32c_m16c_address_to_pointer): Likewise. (m32c_m16c_pointer_to_address): Likewise. * m68hc11-tdep.c (m68hc11_pseudo_register_write): Likewise. * m68k-tdep.c (m68k_get_longjmp_target): Likewise. * machoread.c (macho_check_dsym): Likewise. * macroexp.c (resize_buffer): Likewise. (gather_arguments): Likewise. (maybe_expand): Likewise. * macrotab.c (new_macro_key): Likewise. (new_source_file): Likewise. (new_macro_definition): Likewise. * mdebugread.c (parse_symbol): Likewise. (parse_type): Likewise. (parse_partial_symbols): Likewise. (psymtab_to_symtab_1): Likewise. * mem-break.c (default_memory_insert_breakpoint): Likewise. * mi/mi-cmd-break.c (mi_argv_to_format): Likewise. * mi/mi-main.c (mi_cmd_data_read_memory): Likewise. (mi_cmd_data_read_memory_bytes): Likewise. (mi_cmd_data_write_memory_bytes): Likewise. (mi_cmd_trace_frame_collected): Likewise. * mi/mi-parse.c (mi_parse_argv): Likewise. (mi_parse): Likewise. * minidebug.c (lzma_open): Likewise. (lzma_pread): Likewise. * mips-tdep.c (mips_read_fp_register_single): Likewise. (mips_print_fp_register): Likewise. * mipsnbsd-tdep.c (mipsnbsd_get_longjmp_target): Likewise. * mipsread.c (read_alphacoff_dynamic_symtab): Likewise. * mt-tdep.c (mt_register_name): Likewise. (mt_registers_info): Likewise. (mt_push_dummy_call): Likewise. * namespace.c (add_using_directive): Likewise. * nat/linux-btrace.c (perf_event_read): Likewise. (linux_enable_bts): Likewise. * nat/linux-osdata.c (linux_common_core_of_thread): Likewise. * nat/linux-ptrace.c (linux_ptrace_test_ret_to_nx): Likewise. * nto-tdep.c (nto_find_and_open_solib): Likewise. (nto_parse_redirection): Likewise. * objc-lang.c (objc_demangle): Likewise. (find_methods): Likewise. * objfiles.c (get_objfile_bfd_data): Likewise. (set_objfile_main_name): Likewise. (allocate_objfile): Likewise. (objfile_relocate): Likewise. (update_section_map): Likewise. * osabi.c (generic_elf_osabi_sniff_abi_tag_sections): Likewise. * p-exp.y (exp): Likewise. (yylex): Likewise. * p-valprint.c (pascal_object_print_value): Likewise. * parse.c (initialize_expout): Likewise. (mark_completion_tag): Likewise. (copy_name): Likewise. (parse_float): Likewise. (type_stack_reserve): Likewise. * ppc-linux-tdep.c (ppc_stap_parse_special_token): Likewise. (ppu2spu_prev_register): Likewise. * ppc-ravenscar-thread.c (supply_register_at_address): Likewise. * printcmd.c (printf_wide_c_string): Likewise. (printf_pointer): Likewise. * probe.c (parse_probes): Likewise. * python/py-cmd.c (gdbpy_parse_command_name): Likewise. (cmdpy_init): Likewise. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Likewise. * python/py-symtab.c (set_sal): Likewise. * python/py-unwind.c (pyuw_sniffer): Likewise. * python/python.c (python_interactive_command): Likewise. (compute_python_string): Likewise. * ravenscar-thread.c (get_running_thread_id): Likewise. * record-full.c (record_full_exec_insn): Likewise. (record_full_core_open_1): Likewise. * regcache.c (regcache_raw_read_signed): Likewise. (regcache_raw_read_unsigned): Likewise. (regcache_cooked_read_signed): Likewise. (regcache_cooked_read_unsigned): Likewise. * remote-fileio.c (remote_fileio_func_open): Likewise. (remote_fileio_func_rename): Likewise. (remote_fileio_func_unlink): Likewise. (remote_fileio_func_stat): Likewise. (remote_fileio_func_system): Likewise. * remote-mips.c (mips_xfer_memory): Likewise. (mips_load_srec): Likewise. (pmon_end_download): Likewise. * remote.c (new_remote_state): Likewise. (map_regcache_remote_table): Likewise. (remote_register_number_and_offset): Likewise. (init_remote_state): Likewise. (get_memory_packet_size): Likewise. (remote_pass_signals): Likewise. (remote_program_signals): Likewise. (remote_start_remote): Likewise. (remote_check_symbols): Likewise. (remote_query_supported): Likewise. (extended_remote_attach): Likewise. (process_g_packet): Likewise. (store_registers_using_G): Likewise. (putpkt_binary): Likewise. (read_frame): Likewise. (compare_sections_command): Likewise. (remote_hostio_pread): Likewise. (remote_hostio_readlink): Likewise. (remote_file_put): Likewise. (remote_file_get): Likewise. (remote_pid_to_exec_file): Likewise. (_initialize_remote): Likewise. * rs6000-aix-tdep.c (rs6000_aix_ld_info_to_xml): Likewise. (rs6000_aix_core_xfer_shared_libraries_aix): Likewise. * rs6000-tdep.c (ppc_displaced_step_copy_insn): Likewise. (bfd_uses_spe_extensions): Likewise. * s390-linux-tdep.c (s390_displaced_step_copy_insn): Likewise. * score-tdep.c (score7_malloc_and_get_memblock): Likewise. * solib-dsbt.c (decode_loadmap): Likewise. (fetch_loadmap): Likewise. (scan_dyntag): Likewise. (enable_break): Likewise. (dsbt_relocate_main_executable): Likewise. * solib-frv.c (fetch_loadmap): Likewise. (enable_break2): Likewise. (frv_relocate_main_executable): Likewise. * solib-spu.c (spu_relocate_main_executable): Likewise. (spu_bfd_open): Likewise. * solib-svr4.c (lm_info_read): Likewise. (read_program_header): Likewise. (find_program_interpreter): Likewise. (scan_dyntag): Likewise. (elf_locate_base): Likewise. (open_symbol_file_object): Likewise. (read_program_headers_from_bfd): Likewise. (svr4_relocate_main_executable): Likewise. * solib-target.c (solib_target_relocate_section_addresses): Likewise. * solib.c (solib_find_1): Likewise. (exec_file_find): Likewise. (solib_find): Likewise. * source.c (openp): Likewise. (print_source_lines_base): Likewise. (forward_search_command): Likewise. * sparc-ravenscar-thread.c (supply_register_at_address): Likewise. * spu-tdep.c (spu2ppu_prev_register): Likewise. (spu_get_overlay_table): Likewise. * stabsread.c (patch_block_stabs): Likewise. (define_symbol): Likewise. (again:): Likewise. (read_member_functions): Likewise. (read_one_struct_field): Likewise. (read_enum_type): Likewise. (common_block_start): Likewise. * stack.c (read_frame_arg): Likewise. (backtrace_command): Likewise. * stap-probe.c (stap_parse_register_operand): Likewise. * symfile.c (syms_from_objfile_1): Likewise. (find_separate_debug_file): Likewise. (load_command): Likewise. (load_progress): Likewise. (load_section_callback): Likewise. (reread_symbols): Likewise. (add_filename_language): Likewise. (allocate_compunit_symtab): Likewise. (read_target_long_array): Likewise. (simple_read_overlay_table): Likewise. * symtab.c (symbol_set_names): Likewise. (resize_symbol_cache): Likewise. (rbreak_command): Likewise. (completion_list_add_name): Likewise. (completion_list_objc_symbol): Likewise. (add_filename_to_list): Likewise. * target-descriptions.c (maint_print_c_tdesc_cmd): Likewise. * target-memory.c (target_write_memory_blocks): Likewise. * target.c (target_read_string): Likewise. (read_whatever_is_readable): Likewise. (target_read_alloc_1): Likewise. (simple_search_memory): Likewise. (target_fileio_read_alloc_1): Likewise. * tilegx-tdep.c (tilegx_push_dummy_call): Likewise. * top.c (command_line_input): Likewise. * tracefile-tfile.c (tfile_fetch_registers): Likewise. * tracefile.c (tracefile_fetch_registers): Likewise. * tracepoint.c (add_memrange): Likewise. (init_collection_list): Likewise. (add_aexpr): Likewise. (trace_dump_actions): Likewise. (parse_trace_status): Likewise. (parse_tracepoint_definition): Likewise. (parse_tsv_definition): Likewise. (parse_static_tracepoint_marker_definition): Likewise. * tui/tui-file.c (tui_sfileopen): Likewise. (tui_file_adjust_strbuf): Likewise. * tui/tui-io.c (tui_expand_tabs): Likewise. * tui/tui-source.c (tui_set_source_content): Likewise. * typeprint.c (find_global_typedef): Likewise. * ui-file.c (do_ui_file_xstrdup): Likewise. (ui_file_obsavestring): Likewise. (mem_file_write): Likewise. * utils.c (make_hex_string): Likewise. (get_regcomp_error): Likewise. (puts_filtered_tabular): Likewise. (gdb_realpath_keepfile): Likewise. (ldirname): Likewise. (gdb_bfd_errmsg): Likewise. (substitute_path_component): Likewise. * valops.c (search_struct_method): Likewise. (find_oload_champ_namespace_loop): Likewise. * valprint.c (print_decimal_chars): Likewise. (read_string): Likewise. (generic_emit_char): Likewise. * varobj.c (varobj_delete): Likewise. (varobj_value_get_print_value): Likewise. * vaxobsd-tdep.c (vaxobsd_sigtramp_sniffer): Likewise. * windows-tdep.c (display_one_tib): Likewise. * xcoffread.c (read_xcoff_symtab): Likewise. (process_xcoff_symbol): Likewise. (swap_sym): Likewise. (scan_xcoff_symtab): Likewise. (xcoff_initial_scan): Likewise. * xml-support.c (gdb_xml_end_element): Likewise. (xml_process_xincludes): Likewise. (xml_fetch_content_from_file): Likewise. * xml-syscall.c (xml_list_of_syscalls): Likewise. * xstormy16-tdep.c (xstormy16_push_dummy_call): Likewise. gdb/gdbserver/ChangeLog: * ax.c (gdb_parse_agent_expr): Add cast to allocation result assignment. (gdb_unparse_agent_expr): Likewise. * hostio.c (require_data): Likewise. (handle_pread): Likewise. * linux-low.c (disable_regset): Likewise. (fetch_register): Likewise. (store_register): Likewise. (get_dynamic): Likewise. (linux_qxfer_libraries_svr4): Likewise. * mem-break.c (delete_fast_tracepoint_jump): Likewise. (set_fast_tracepoint_jump): Likewise. (uninsert_fast_tracepoint_jumps_at): Likewise. (reinsert_fast_tracepoint_jumps_at): Likewise. (validate_inserted_breakpoint): Likewise. (clone_agent_expr): Likewise. * regcache.c (init_register_cache): Likewise. * remote-utils.c (putpkt_binary_1): Likewise. (decode_M_packet): Likewise. (decode_X_packet): Likewise. (look_up_one_symbol): Likewise. (relocate_instruction): Likewise. (monitor_output): Likewise. * server.c (handle_search_memory): Likewise. (handle_qxfer_exec_file): Likewise. (handle_qxfer_libraries): Likewise. (handle_qxfer): Likewise. (handle_query): Likewise. (handle_v_cont): Likewise. (handle_v_run): Likewise. (captured_main): Likewise. * target.c (write_inferior_memory): Likewise. * thread-db.c (try_thread_db_load_from_dir): Likewise. * tracepoint.c (init_trace_buffer): Likewise. (add_tracepoint_action): Likewise. (add_traceframe): Likewise. (add_traceframe_block): Likewise. (cmd_qtdpsrc): Likewise. (cmd_qtdv): Likewise. (cmd_qtstatus): Likewise. (response_source): Likewise. (response_tsv): Likewise. (cmd_qtnotes): Likewise. (gdb_collect): Likewise. (initialize_tracepoint): Likewise.
2015-09-25 20:08:06 +02:00
local_prompt
= (char *) alloca ((prompt == NULL ? 0 : strlen (prompt))
+ strlen (annotation_suffix) + 40);
Fix build with Python 3.4 (PR python/16784) The type of the function pointer PyOS_ReadlineFunctionPointer (part of the Python C API), which we use, slightly changed starting with Python 3.4. The signature went from PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, char *); to PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, const char *); The parameter that changed is the prompt text. This commits adjust gdb accordingly by making the prompt_arg parameter const, as well as the fallouts of that. I needed to rework how annotations are added to the prompt, since the it is now const. If annotations are enabled, it will make a copy of the prompt overwrite the prompt variable that is used throughout the function. Otherwise, no copy is done and the original prompt_arg value is passed. I changed the signature of deprecated_readline_hook. I would've changed any user of it, but it seems like nothing is using it, Built-tested with python 2.7.x, 3.3.y and 3.4.z. gdb/ChangeLog: * defs.h (gdb_readline): Constify argument. (gdb_readline_wrapper): Same. (command_line_input): Same. (deprecated_readline_hook): Same. * top.c (deprecated_readline_hook): Same. (gdb_readline): Same. (gdb_readline_wrapper): Same. (command_line_input): Constify argument. Pass prompt to called functions instead of local_prompt, overwriting prompt if using annotations. * event-top.h (display_gdb_prompt): Constify argument. * event-top.c (display_gdb_prompt): Same. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Constify argument if building with Python 3.4 and up. Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
2014-12-15 17:38:03 +01:00
if (prompt == NULL)
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
local_prompt[0] = '\0';
else
Fix build with Python 3.4 (PR python/16784) The type of the function pointer PyOS_ReadlineFunctionPointer (part of the Python C API), which we use, slightly changed starting with Python 3.4. The signature went from PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, char *); to PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, const char *); The parameter that changed is the prompt text. This commits adjust gdb accordingly by making the prompt_arg parameter const, as well as the fallouts of that. I needed to rework how annotations are added to the prompt, since the it is now const. If annotations are enabled, it will make a copy of the prompt overwrite the prompt variable that is used throughout the function. Otherwise, no copy is done and the original prompt_arg value is passed. I changed the signature of deprecated_readline_hook. I would've changed any user of it, but it seems like nothing is using it, Built-tested with python 2.7.x, 3.3.y and 3.4.z. gdb/ChangeLog: * defs.h (gdb_readline): Constify argument. (gdb_readline_wrapper): Same. (command_line_input): Same. (deprecated_readline_hook): Same. * top.c (deprecated_readline_hook): Same. (gdb_readline): Same. (gdb_readline_wrapper): Same. (command_line_input): Constify argument. Pass prompt to called functions instead of local_prompt, overwriting prompt if using annotations. * event-top.h (display_gdb_prompt): Constify argument. * event-top.c (display_gdb_prompt): Same. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Constify argument if building with Python 3.4 and up. Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
2014-12-15 17:38:03 +01:00
strcpy (local_prompt, prompt);
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
strcat (local_prompt, "\n\032\032");
strcat (local_prompt, annotation_suffix);
strcat (local_prompt, "\n");
Fix build with Python 3.4 (PR python/16784) The type of the function pointer PyOS_ReadlineFunctionPointer (part of the Python C API), which we use, slightly changed starting with Python 3.4. The signature went from PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, char *); to PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, const char *); The parameter that changed is the prompt text. This commits adjust gdb accordingly by making the prompt_arg parameter const, as well as the fallouts of that. I needed to rework how annotations are added to the prompt, since the it is now const. If annotations are enabled, it will make a copy of the prompt overwrite the prompt variable that is used throughout the function. Otherwise, no copy is done and the original prompt_arg value is passed. I changed the signature of deprecated_readline_hook. I would've changed any user of it, but it seems like nothing is using it, Built-tested with python 2.7.x, 3.3.y and 3.4.z. gdb/ChangeLog: * defs.h (gdb_readline): Constify argument. (gdb_readline_wrapper): Same. (command_line_input): Same. (deprecated_readline_hook): Same. * top.c (deprecated_readline_hook): Same. (gdb_readline): Same. (gdb_readline_wrapper): Same. (command_line_input): Constify argument. Pass prompt to called functions instead of local_prompt, overwriting prompt if using annotations. * event-top.h (display_gdb_prompt): Constify argument. * event-top.c (display_gdb_prompt): Same. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Constify argument if building with Python 3.4 and up. Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
2014-12-15 17:38:03 +01:00
prompt = local_prompt;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
}
1999-06-21 15:27:42 +02:00
if (!cmd_line_buffer_initialized)
1999-06-21 15:27:42 +02:00
{
buffer_init (&cmd_line_buffer);
cmd_line_buffer_initialized = 1;
1999-06-21 15:27:42 +02:00
}
/* Starting a new command line. */
cmd_line_buffer.used_size = 0;
1999-06-21 15:27:42 +02:00
Eliminate STOP_SIGNAL, use SIGTSTP directly The STOP_SIGNAL macro was originally added for Convex Unix (https://en.wikipedia.org/wiki/Convex_Computer). In: git show 7a67dd45ca1c:gdb/m-convex.h we see: ~~~ /* Use SIGCONT rather than SIGTSTP because convex Unix occasionally turkeys SIGTSTP. I think. */ #define STOP_SIGNAL SIGCONT ~~~ That's gdb-3.5, 1990... In gdb/ChangeLog-3.x we see: ~~~ Tue Apr 18 13:43:37 1989 Randall Smith (randy at apple-gunkies.ai.mit.edu) Various changes involved in 1) getting gdb to work on the convex, [...] Made whatever signal indicates a stop configurable (via macro STOP_SIGNAL). (main): Setup use of above as a signal handler. Added check for "-nw" in args already processed. (command_line_input): SIGTSTP ==>STOP_SIGNAL. ~~~ Support for Convex Unix is long gone, and nothing else overrides STOP_SIGNAL. So just use SIGTSTP directly, removing a little obfuscation. (I don't really understand why we override [1] readline's SIGTSTP handler (only) when reading scripts (and then fail to restore it properly, assuming SIG_DFL...), but I'll leave that for another pass. [1] - Actually, starting with readline 6.3, readline is no longer installing its handlers while GDB is in control...) gdb/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * event-top.c: Check SIGTSTP instead of STOP_SIGNAL thoughout. (async_init_signals): Adjust. (handle_stop_sig): Rename to ... (handle_sigtstp): ... this. (async_stop_sig): Rename to ... (async_sigtstp_handler): ... this, and delete STOP_SIGNAL != SIGTSTP path. * event-top.h: Move signal.h include to the top. Check SIGTSTP instead of STOP_SIGNAL thoughout. (handle_stop_sig): Rename to ... (handle_sigtstp): ... this. * top.c (command_line_input): Replace STOP_SIGNAL -> SIGTSTP.
2017-11-06 16:36:47 +01:00
#ifdef SIGTSTP
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
if (job_control)
Eliminate STOP_SIGNAL, use SIGTSTP directly The STOP_SIGNAL macro was originally added for Convex Unix (https://en.wikipedia.org/wiki/Convex_Computer). In: git show 7a67dd45ca1c:gdb/m-convex.h we see: ~~~ /* Use SIGCONT rather than SIGTSTP because convex Unix occasionally turkeys SIGTSTP. I think. */ #define STOP_SIGNAL SIGCONT ~~~ That's gdb-3.5, 1990... In gdb/ChangeLog-3.x we see: ~~~ Tue Apr 18 13:43:37 1989 Randall Smith (randy at apple-gunkies.ai.mit.edu) Various changes involved in 1) getting gdb to work on the convex, [...] Made whatever signal indicates a stop configurable (via macro STOP_SIGNAL). (main): Setup use of above as a signal handler. Added check for "-nw" in args already processed. (command_line_input): SIGTSTP ==>STOP_SIGNAL. ~~~ Support for Convex Unix is long gone, and nothing else overrides STOP_SIGNAL. So just use SIGTSTP directly, removing a little obfuscation. (I don't really understand why we override [1] readline's SIGTSTP handler (only) when reading scripts (and then fail to restore it properly, assuming SIG_DFL...), but I'll leave that for another pass. [1] - Actually, starting with readline 6.3, readline is no longer installing its handlers while GDB is in control...) gdb/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * event-top.c: Check SIGTSTP instead of STOP_SIGNAL thoughout. (async_init_signals): Adjust. (handle_stop_sig): Rename to ... (handle_sigtstp): ... this. (async_stop_sig): Rename to ... (async_sigtstp_handler): ... this, and delete STOP_SIGNAL != SIGTSTP path. * event-top.h: Move signal.h include to the top. Check SIGTSTP instead of STOP_SIGNAL thoughout. (handle_stop_sig): Rename to ... (handle_sigtstp): ... this. * top.c (command_line_input): Replace STOP_SIGNAL -> SIGTSTP.
2017-11-06 16:36:47 +01:00
signal (SIGTSTP, handle_sigtstp);
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
#endif
while (1)
1999-06-21 15:27:42 +02:00
{
Use gdb::unique_xmalloc_ptr<char> in command_line_input to fix a leak Following the change of logic where the input_handler gets a gdb::unique_xmalloc_ptr<char>, a call to readline directly followed by a call to handle_line_of_input is missing a free, and causes the below leak. Use gdb::unique_xmalloc_ptr<char> to solve the leak. ==16291== VALGRIND_GDB_ERROR_BEGIN ==16291== 64 bytes in 1 blocks are definitely lost in loss record 1,815 of 4,111 ==16291== at 0x4C2E2B3: realloc (vg_replace_malloc.c:836) ==16291== by 0x41EB1C: xrealloc (common-utils.c:62) ==16291== by 0x41DBD3: buffer_grow(buffer*, char const*, unsigned long) [clone .part.1] (buffer.c:40) ==16291== by 0x66E8FF: buffer_grow_char (buffer.h:40) ==16291== by 0x66E8FF: gdb_readline_no_editing (top.c:798) ==16291== by 0x66E8FF: command_line_input(char const*, char const*) (top.c:1249) ==16291== by 0x66EBD8: read_command_file(_IO_FILE*) (top.c:421) ==16291== by 0x412C0C: script_from_file(_IO_FILE*, char const*) (cli-script.c:1547) ==16291== by 0x40BE90: source_script_from_stream (cli-cmds.c:569) ==16291== by 0x40BE90: source_script_with_search(char const*, int, int) (cli-cmds.c:606) ==16291== by 0x54D567: catch_command_errors(void (*)(char const*, int), char const*, int) (main.c:379) ==16291== by 0x54EA84: captured_main_1 (main.c:994) ==16291== by 0x54EA84: captured_main (main.c:1167) ==16291== by 0x54EA84: gdb_main(captured_main_args*) (main.c:1193) ==16291== by 0x29DA27: main (gdb.c:32) ==16291== ==16291== VALGRIND_GDB_ERROR_END gdb/ChangeLog 2018-12-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (command_line_input): Use unique_xmalloc_ptr to manage memory allocated by readline.
2018-12-30 20:41:49 +01:00
gdb::unique_xmalloc_ptr<char> rl;
/* Make sure that all output has been output. Some machines may
let you get away with leaving out some of the gdb_flush, but
not all. */
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
wrap_here ("");
gdb_flush (gdb_stdout);
gdb_flush (gdb_stderr);
Fix error message and use-after-free on errors in nested sourced files Errors that happen in nested sourced files (when a sourced file sources another file) lead to a wrong error message, or use-after-free. For example, if I put this in "a.gdb": command_that_doesnt_exist and this in "b.gdb": source a.gdb and try to "source b.gdb" in GDB, the result may look like this: (gdb) source b.gdb b.gdb:1: Error in sourced command file: _that_doesnt_exist:1: Error in sourced command file: Undefined command: "command_that_doesnt_exist". Try "help". Notice the wrong file name where "a.gdb" should be. The exact result may differ, depending on the feelings of the memory allocator. What happens is: - The "source a.gdb" command is saved by command_line_append_input_line in command_line_input's static buffer. - Since we are sourcing a file, the script_from_file function stores the script name (a.gdb) in the source_file_name global. However, it doesn't do a copy, it just saves a pointer to command_line_input's static buffer. - The "command_that_doesnt_exist" command is saved by command_line_append_input_line in command_line_input's static buffer. Depending on what xrealloc does, source_file_name may now point to freed memory, or at the minimum the data it was pointing to was overwritten. - When the error is handled in script_from_file, we dererence source_file_name to print the name of the file in which the error occured. To fix it, I made source_file_name an std::string, so that keeps a copy of the file name instead of pointing to a buffer with a too small lifetime. With this patch, the expected filename is printed, and no use-after-free occurs: (gdb) source b.gdb b.gdb:1: Error in sourced command file: a.gdb:1: Error in sourced command file: Undefined command: "command_that_doesnt_exist". Try "help". I passed explicit template parameters to make_scoped_restore (<std::string, const std::string &>), so that the second parameter is passed by reference and avoid a copy. It was not as obvious as I first thought to change gdb.base/source.exp to test this, because source commands inside sourced files are interpreted relative to GDB's current working directory, not the directory of the currently sourced file. As a workaround, I moved the snippet that tests errors after the snippet that adds the source directory to the search path. This way, the "source source-error-1.gdb" line in source-error.exp manages to find the file. For reference, here is what ASAN reports when use-after-free occurs: (gdb) source b.gdb ================================================================= ==18498==ERROR: AddressSanitizer: heap-use-after-free on address 0x60c000019847 at pc 0x7f1d3645de8e bp 0x7ffdcb892e50 sp 0x7ffdcb8925c8 READ of size 6 at 0x60c000019847 thread T0 #0 0x7f1d3645de8d in printf_common /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors_format.inc:546 #1 0x7f1d36477175 in __interceptor_vasprintf /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors.inc:1525 #2 0x5632eaffa277 in xstrvprintf(char const*, __va_list_tag*) /home/simark/src/binutils-gdb/gdb/common/common-utils.c:122 #3 0x5632eaff96d1 in throw_it /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:351 #4 0x5632eaff98df in throw_verror(errors, char const*, __va_list_tag*) /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:379 #5 0x5632eaff9a2a in throw_error(errors, char const*, ...) /home/simark/src/binutils-gdb/gdb/common/common-exceptions.c:394 #6 0x5632eafca21a in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1553 #7 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #8 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #9 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #10 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #11 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #12 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #13 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #14 0x5632ebf3cf09 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:425 #15 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547 #16 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #17 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #18 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #19 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #20 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #21 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #22 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #23 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770 #24 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213 #25 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220 #26 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175 #27 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192 #28 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511 #29 0x5632eb3aa6a9 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733 #30 0x5632eb3aaf41 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859 #31 0x5632eb3a88ea in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:347 #32 0x5632eb3a89bf in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371 #33 0x5632eb76fbfc in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:330 #34 0x5632eb772ea8 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1176 #35 0x5632eb773071 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1192 #36 0x5632eabfe7f9 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32 #37 0x7f1d3554f222 in __libc_start_main (/usr/lib/libc.so.6+0x24222) #38 0x5632eabfe5dd in _start (/home/simark/build/binutils-gdb/gdb/gdb+0x195d5dd) 0x60c000019847 is located 7 bytes inside of 128-byte region [0x60c000019840,0x60c0000198c0) freed by thread T0 here: #0 0x7f1d36502491 in __interceptor_realloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:105 #1 0x5632eaff9f47 in xrealloc /home/simark/src/binutils-gdb/gdb/common/common-utils.c:62 #2 0x5632eaff6b44 in buffer_grow(buffer*, char const*, unsigned long) /home/simark/src/binutils-gdb/gdb/common/buffer.c:40 #3 0x5632eb3b271d in command_line_append_input_line /home/simark/src/binutils-gdb/gdb/event-top.c:614 #4 0x5632eb3b28c6 in handle_line_of_input(buffer*, char const*, int, char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:654 #5 0x5632ebf402a6 in command_line_input(char const*, char const*) /home/simark/src/binutils-gdb/gdb/top.c:1252 #6 0x5632ebf3cee9 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:422 #7 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547 #8 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #9 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #10 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #11 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #12 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #13 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #14 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #15 0x5632ebf3cf09 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:425 #16 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547 #17 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #18 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #19 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #20 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #21 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #22 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #23 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #24 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770 #25 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213 #26 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220 #27 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175 #28 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192 #29 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511 previously allocated by thread T0 here: #0 0x7f1d36502491 in __interceptor_realloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:105 #1 0x5632eaff9f47 in xrealloc /home/simark/src/binutils-gdb/gdb/common/common-utils.c:62 #2 0x5632eaff6b44 in buffer_grow(buffer*, char const*, unsigned long) /home/simark/src/binutils-gdb/gdb/common/buffer.c:40 #3 0x5632eb3b271d in command_line_append_input_line /home/simark/src/binutils-gdb/gdb/event-top.c:614 #4 0x5632eb3b28c6 in handle_line_of_input(buffer*, char const*, int, char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:654 #5 0x5632ebf402a6 in command_line_input(char const*, char const*) /home/simark/src/binutils-gdb/gdb/top.c:1252 #6 0x5632ebf3cee9 in read_command_file(_IO_FILE*) /home/simark/src/binutils-gdb/gdb/top.c:422 #7 0x5632eafca054 in script_from_file(_IO_FILE*, char const*) /home/simark/src/binutils-gdb/gdb/cli/cli-script.c:1547 #8 0x5632eaf8a500 in source_script_from_stream /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:569 #9 0x5632eaf8a735 in source_script_with_search /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:605 #10 0x5632eaf8ab20 in source_command /home/simark/src/binutils-gdb/gdb/cli/cli-cmds.c:664 #11 0x5632eafa8b4a in do_const_cfunc /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:106 #12 0x5632eafb0687 in cmd_func(cmd_list_element*, char const*, int) /home/simark/src/binutils-gdb/gdb/cli/cli-decode.c:1892 #13 0x5632ebf3dd87 in execute_command(char const*, int) /home/simark/src/binutils-gdb/gdb/top.c:630 #14 0x5632eb3b25d3 in command_handler(char const*) /home/simark/src/binutils-gdb/gdb/event-top.c:583 #15 0x5632eb3b2f87 in command_line_handler(std::unique_ptr<char, gdb::xfree_deleter<char> >&&) /home/simark/src/binutils-gdb/gdb/event-top.c:770 #16 0x5632eb3b0fe1 in gdb_rl_callback_handler /home/simark/src/binutils-gdb/gdb/event-top.c:213 #17 0x5632ec1c8729 in rl_callback_read_char /home/simark/src/binutils-gdb/readline/callback.c:220 #18 0x5632eb3b0b8f in gdb_rl_callback_read_char_wrapper_noexcept /home/simark/src/binutils-gdb/gdb/event-top.c:175 #19 0x5632eb3b0da1 in gdb_rl_callback_read_char_wrapper /home/simark/src/binutils-gdb/gdb/event-top.c:192 #20 0x5632eb3b2186 in stdin_event_handler(int, void*) /home/simark/src/binutils-gdb/gdb/event-top.c:511 #21 0x5632eb3aa6a9 in handle_file_event /home/simark/src/binutils-gdb/gdb/event-loop.c:733 #22 0x5632eb3aaf41 in gdb_wait_for_event /home/simark/src/binutils-gdb/gdb/event-loop.c:859 #23 0x5632eb3a88ea in gdb_do_one_event() /home/simark/src/binutils-gdb/gdb/event-loop.c:347 #24 0x5632eb3a89bf in start_event_loop() /home/simark/src/binutils-gdb/gdb/event-loop.c:371 #25 0x5632eb76fbfc in captured_command_loop /home/simark/src/binutils-gdb/gdb/main.c:330 #26 0x5632eb772ea8 in captured_main /home/simark/src/binutils-gdb/gdb/main.c:1176 #27 0x5632eb773071 in gdb_main(captured_main_args*) /home/simark/src/binutils-gdb/gdb/main.c:1192 #28 0x5632eabfe7f9 in main /home/simark/src/binutils-gdb/gdb/gdb.c:32 #29 0x7f1d3554f222 in __libc_start_main (/usr/lib/libc.so.6+0x24222) SUMMARY: AddressSanitizer: heap-use-after-free /build/gcc/src/gcc/libsanitizer/sanitizer_common/sanitizer_common_interceptors_format.inc:546 in printf_common gdb/ChangeLog: * top.h (source_file_name): Change to std::string. * top.c (source_file_name): Likewise. (command_line_input): Adjust. * cli/cli-script.c (script_from_file): Adjust. gdb/testsuite/ChangeLog: * gdb.base/source.exp: Move "error in sourced script" code to the end. * gdb.base/source-error.gdb: Move contents to source-error-1.gdb. Add new code to source source-error-1.gdb. * gdb.base/source-error-1.gdb: New file, from previous source-error.gdb.
2019-02-20 03:10:18 +01:00
if (!source_file_name.empty ())
++source_line_number;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
if (from_tty && annotation_level > 1)
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
{
puts_unfiltered ("\n\032\032pre-");
puts_unfiltered (annotation_suffix);
puts_unfiltered ("\n");
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
}
/* Don't use fancy stuff if not talking to stdin. */
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
if (deprecated_readline_hook
&& from_tty
&& input_interactive_p (current_ui))
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
{
Use gdb::unique_xmalloc_ptr<char> in command_line_input to fix a leak Following the change of logic where the input_handler gets a gdb::unique_xmalloc_ptr<char>, a call to readline directly followed by a call to handle_line_of_input is missing a free, and causes the below leak. Use gdb::unique_xmalloc_ptr<char> to solve the leak. ==16291== VALGRIND_GDB_ERROR_BEGIN ==16291== 64 bytes in 1 blocks are definitely lost in loss record 1,815 of 4,111 ==16291== at 0x4C2E2B3: realloc (vg_replace_malloc.c:836) ==16291== by 0x41EB1C: xrealloc (common-utils.c:62) ==16291== by 0x41DBD3: buffer_grow(buffer*, char const*, unsigned long) [clone .part.1] (buffer.c:40) ==16291== by 0x66E8FF: buffer_grow_char (buffer.h:40) ==16291== by 0x66E8FF: gdb_readline_no_editing (top.c:798) ==16291== by 0x66E8FF: command_line_input(char const*, char const*) (top.c:1249) ==16291== by 0x66EBD8: read_command_file(_IO_FILE*) (top.c:421) ==16291== by 0x412C0C: script_from_file(_IO_FILE*, char const*) (cli-script.c:1547) ==16291== by 0x40BE90: source_script_from_stream (cli-cmds.c:569) ==16291== by 0x40BE90: source_script_with_search(char const*, int, int) (cli-cmds.c:606) ==16291== by 0x54D567: catch_command_errors(void (*)(char const*, int), char const*, int) (main.c:379) ==16291== by 0x54EA84: captured_main_1 (main.c:994) ==16291== by 0x54EA84: captured_main (main.c:1167) ==16291== by 0x54EA84: gdb_main(captured_main_args*) (main.c:1193) ==16291== by 0x29DA27: main (gdb.c:32) ==16291== ==16291== VALGRIND_GDB_ERROR_END gdb/ChangeLog 2018-12-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (command_line_input): Use unique_xmalloc_ptr to manage memory allocated by readline.
2018-12-30 20:41:49 +01:00
rl.reset ((*deprecated_readline_hook) (prompt));
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
}
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
else if (command_editing_p
&& from_tty
&& input_interactive_p (current_ui))
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
{
Use gdb::unique_xmalloc_ptr<char> in command_line_input to fix a leak Following the change of logic where the input_handler gets a gdb::unique_xmalloc_ptr<char>, a call to readline directly followed by a call to handle_line_of_input is missing a free, and causes the below leak. Use gdb::unique_xmalloc_ptr<char> to solve the leak. ==16291== VALGRIND_GDB_ERROR_BEGIN ==16291== 64 bytes in 1 blocks are definitely lost in loss record 1,815 of 4,111 ==16291== at 0x4C2E2B3: realloc (vg_replace_malloc.c:836) ==16291== by 0x41EB1C: xrealloc (common-utils.c:62) ==16291== by 0x41DBD3: buffer_grow(buffer*, char const*, unsigned long) [clone .part.1] (buffer.c:40) ==16291== by 0x66E8FF: buffer_grow_char (buffer.h:40) ==16291== by 0x66E8FF: gdb_readline_no_editing (top.c:798) ==16291== by 0x66E8FF: command_line_input(char const*, char const*) (top.c:1249) ==16291== by 0x66EBD8: read_command_file(_IO_FILE*) (top.c:421) ==16291== by 0x412C0C: script_from_file(_IO_FILE*, char const*) (cli-script.c:1547) ==16291== by 0x40BE90: source_script_from_stream (cli-cmds.c:569) ==16291== by 0x40BE90: source_script_with_search(char const*, int, int) (cli-cmds.c:606) ==16291== by 0x54D567: catch_command_errors(void (*)(char const*, int), char const*, int) (main.c:379) ==16291== by 0x54EA84: captured_main_1 (main.c:994) ==16291== by 0x54EA84: captured_main (main.c:1167) ==16291== by 0x54EA84: gdb_main(captured_main_args*) (main.c:1193) ==16291== by 0x29DA27: main (gdb.c:32) ==16291== ==16291== VALGRIND_GDB_ERROR_END gdb/ChangeLog 2018-12-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (command_line_input): Use unique_xmalloc_ptr to manage memory allocated by readline.
2018-12-30 20:41:49 +01:00
rl.reset (gdb_readline_wrapper (prompt));
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
}
1999-06-21 15:27:42 +02:00
else
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
{
Use gdb::unique_xmalloc_ptr<char> in command_line_input to fix a leak Following the change of logic where the input_handler gets a gdb::unique_xmalloc_ptr<char>, a call to readline directly followed by a call to handle_line_of_input is missing a free, and causes the below leak. Use gdb::unique_xmalloc_ptr<char> to solve the leak. ==16291== VALGRIND_GDB_ERROR_BEGIN ==16291== 64 bytes in 1 blocks are definitely lost in loss record 1,815 of 4,111 ==16291== at 0x4C2E2B3: realloc (vg_replace_malloc.c:836) ==16291== by 0x41EB1C: xrealloc (common-utils.c:62) ==16291== by 0x41DBD3: buffer_grow(buffer*, char const*, unsigned long) [clone .part.1] (buffer.c:40) ==16291== by 0x66E8FF: buffer_grow_char (buffer.h:40) ==16291== by 0x66E8FF: gdb_readline_no_editing (top.c:798) ==16291== by 0x66E8FF: command_line_input(char const*, char const*) (top.c:1249) ==16291== by 0x66EBD8: read_command_file(_IO_FILE*) (top.c:421) ==16291== by 0x412C0C: script_from_file(_IO_FILE*, char const*) (cli-script.c:1547) ==16291== by 0x40BE90: source_script_from_stream (cli-cmds.c:569) ==16291== by 0x40BE90: source_script_with_search(char const*, int, int) (cli-cmds.c:606) ==16291== by 0x54D567: catch_command_errors(void (*)(char const*, int), char const*, int) (main.c:379) ==16291== by 0x54EA84: captured_main_1 (main.c:994) ==16291== by 0x54EA84: captured_main (main.c:1167) ==16291== by 0x54EA84: gdb_main(captured_main_args*) (main.c:1193) ==16291== by 0x29DA27: main (gdb.c:32) ==16291== ==16291== VALGRIND_GDB_ERROR_END gdb/ChangeLog 2018-12-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (command_line_input): Use unique_xmalloc_ptr to manage memory allocated by readline.
2018-12-30 20:41:49 +01:00
rl.reset (gdb_readline_no_editing (prompt));
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
}
1999-06-21 15:27:42 +02:00
Use gdb::unique_xmalloc_ptr<char> in command_line_input to fix a leak Following the change of logic where the input_handler gets a gdb::unique_xmalloc_ptr<char>, a call to readline directly followed by a call to handle_line_of_input is missing a free, and causes the below leak. Use gdb::unique_xmalloc_ptr<char> to solve the leak. ==16291== VALGRIND_GDB_ERROR_BEGIN ==16291== 64 bytes in 1 blocks are definitely lost in loss record 1,815 of 4,111 ==16291== at 0x4C2E2B3: realloc (vg_replace_malloc.c:836) ==16291== by 0x41EB1C: xrealloc (common-utils.c:62) ==16291== by 0x41DBD3: buffer_grow(buffer*, char const*, unsigned long) [clone .part.1] (buffer.c:40) ==16291== by 0x66E8FF: buffer_grow_char (buffer.h:40) ==16291== by 0x66E8FF: gdb_readline_no_editing (top.c:798) ==16291== by 0x66E8FF: command_line_input(char const*, char const*) (top.c:1249) ==16291== by 0x66EBD8: read_command_file(_IO_FILE*) (top.c:421) ==16291== by 0x412C0C: script_from_file(_IO_FILE*, char const*) (cli-script.c:1547) ==16291== by 0x40BE90: source_script_from_stream (cli-cmds.c:569) ==16291== by 0x40BE90: source_script_with_search(char const*, int, int) (cli-cmds.c:606) ==16291== by 0x54D567: catch_command_errors(void (*)(char const*, int), char const*, int) (main.c:379) ==16291== by 0x54EA84: captured_main_1 (main.c:994) ==16291== by 0x54EA84: captured_main (main.c:1167) ==16291== by 0x54EA84: gdb_main(captured_main_args*) (main.c:1193) ==16291== by 0x29DA27: main (gdb.c:32) ==16291== ==16291== VALGRIND_GDB_ERROR_END gdb/ChangeLog 2018-12-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (command_line_input): Use unique_xmalloc_ptr to manage memory allocated by readline.
2018-12-30 20:41:49 +01:00
cmd = handle_line_of_input (&cmd_line_buffer, rl.get (),
0, annotation_suffix);
if (cmd == (char *) EOF)
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
{
cmd = NULL;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
break;
1999-06-21 15:27:42 +02:00
}
if (cmd != NULL)
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
break;
1999-06-21 15:27:42 +02:00
Fix PR 21218: GDB dumps core when escaping newline in multi-line command With commit 3b12939dfc2399 ("Replace the sync_execution global with a new enum prompt_state tristate"), GDB started aborting if you try splitting an input line with a continuation char (backslash) while in a multi-line command: (gdb) commands Type commands for breakpoint(s) 1, one per line. End with a line saying just "end". >print \ (gdb) 1 # note "(gdb)" incorrectly printed here. >end readline: readline_callback_read_char() called with no handler! $ That abort is actually a symptom of an old problem introduced when gdb_readline_wrapper was rewritten to use asynchronous readline, back in 2007. Note how the "(gdb)" prompt is printed above in the "(gdb) 1" line. Clearly it shouldn't be there, but it already was before the commit mentioned above. Fixing that also fixes the readline abort shown above. The problem starts when command_line_input passes a NULL prompt to gdb_readline_wrapper when it finds previous incomplete input due to a backslash, trying to fetch more input without printing another ">" secondary prompt. That itself should not be a problem, because passing NULL to gdb_readline_wrapper has the same meaning as passing a pointer to empty string, since gdb_readline_wrapper exposes the same interface as 'readline(char *)'. However, gdb_readline_wrapper passes the prompt argument directly to display_gdb_prompt, and for the latter, a NULL prompt argument has a different meaning - it requests printing the primary prompt. Before commit 782a7b8ef9c096 (which rewrote gdb_readline_wrapper to use asynchronous readline), GDB behaved like this: (gdb) commands [....] >print \ 1 >end (gdb) The above is what this commit restores GDB back to. New test included. gdb/ChangeLog: 2017-03-08 Pedro Alves <palves@redhat.com> PR cli/21218 * top.c (gdb_readline_wrapper): Avoid passing NULL to display_gdb_prompt. (command_line_input): Add comment. gdb/testsuite/ChangeLog: 2017-03-08 Pedro Alves <palves@redhat.com> Jan Kratochvil <jan.kratochvil@redhat.com> PR cli/21218 * gdb.base/commands.exp (backslash_in_multi_line_command_test): New proc. (top level): Call it.
2017-03-08 12:41:35 +01:00
/* Got partial input. I.e., got a line that ends with a
continuation character (backslash). Suppress printing the
prompt again. */
Fix build with Python 3.4 (PR python/16784) The type of the function pointer PyOS_ReadlineFunctionPointer (part of the Python C API), which we use, slightly changed starting with Python 3.4. The signature went from PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, char *); to PyAPI_DATA(char) *(*PyOS_ReadlineFunctionPointer)(FILE *, FILE *, const char *); The parameter that changed is the prompt text. This commits adjust gdb accordingly by making the prompt_arg parameter const, as well as the fallouts of that. I needed to rework how annotations are added to the prompt, since the it is now const. If annotations are enabled, it will make a copy of the prompt overwrite the prompt variable that is used throughout the function. Otherwise, no copy is done and the original prompt_arg value is passed. I changed the signature of deprecated_readline_hook. I would've changed any user of it, but it seems like nothing is using it, Built-tested with python 2.7.x, 3.3.y and 3.4.z. gdb/ChangeLog: * defs.h (gdb_readline): Constify argument. (gdb_readline_wrapper): Same. (command_line_input): Same. (deprecated_readline_hook): Same. * top.c (deprecated_readline_hook): Same. (gdb_readline): Same. (gdb_readline_wrapper): Same. (command_line_input): Constify argument. Pass prompt to called functions instead of local_prompt, overwriting prompt if using annotations. * event-top.h (display_gdb_prompt): Constify argument. * event-top.c (display_gdb_prompt): Same. * python/py-gdb-readline.c (gdbpy_readline_wrapper): Constify argument if building with Python 3.4 and up. Signed-off-by: Simon Marchi <simon.marchi@ericsson.com>
2014-12-15 17:38:03 +01:00
prompt = NULL;
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
}
1999-06-21 15:27:42 +02:00
Eliminate STOP_SIGNAL, use SIGTSTP directly The STOP_SIGNAL macro was originally added for Convex Unix (https://en.wikipedia.org/wiki/Convex_Computer). In: git show 7a67dd45ca1c:gdb/m-convex.h we see: ~~~ /* Use SIGCONT rather than SIGTSTP because convex Unix occasionally turkeys SIGTSTP. I think. */ #define STOP_SIGNAL SIGCONT ~~~ That's gdb-3.5, 1990... In gdb/ChangeLog-3.x we see: ~~~ Tue Apr 18 13:43:37 1989 Randall Smith (randy at apple-gunkies.ai.mit.edu) Various changes involved in 1) getting gdb to work on the convex, [...] Made whatever signal indicates a stop configurable (via macro STOP_SIGNAL). (main): Setup use of above as a signal handler. Added check for "-nw" in args already processed. (command_line_input): SIGTSTP ==>STOP_SIGNAL. ~~~ Support for Convex Unix is long gone, and nothing else overrides STOP_SIGNAL. So just use SIGTSTP directly, removing a little obfuscation. (I don't really understand why we override [1] readline's SIGTSTP handler (only) when reading scripts (and then fail to restore it properly, assuming SIG_DFL...), but I'll leave that for another pass. [1] - Actually, starting with readline 6.3, readline is no longer installing its handlers while GDB is in control...) gdb/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * event-top.c: Check SIGTSTP instead of STOP_SIGNAL thoughout. (async_init_signals): Adjust. (handle_stop_sig): Rename to ... (handle_sigtstp): ... this. (async_stop_sig): Rename to ... (async_sigtstp_handler): ... this, and delete STOP_SIGNAL != SIGTSTP path. * event-top.h: Move signal.h include to the top. Check SIGTSTP instead of STOP_SIGNAL thoughout. (handle_stop_sig): Rename to ... (handle_sigtstp): ... this. * top.c (command_line_input): Replace STOP_SIGNAL -> SIGTSTP.
2017-11-06 16:36:47 +01:00
#ifdef SIGTSTP
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
if (job_control)
Eliminate STOP_SIGNAL, use SIGTSTP directly The STOP_SIGNAL macro was originally added for Convex Unix (https://en.wikipedia.org/wiki/Convex_Computer). In: git show 7a67dd45ca1c:gdb/m-convex.h we see: ~~~ /* Use SIGCONT rather than SIGTSTP because convex Unix occasionally turkeys SIGTSTP. I think. */ #define STOP_SIGNAL SIGCONT ~~~ That's gdb-3.5, 1990... In gdb/ChangeLog-3.x we see: ~~~ Tue Apr 18 13:43:37 1989 Randall Smith (randy at apple-gunkies.ai.mit.edu) Various changes involved in 1) getting gdb to work on the convex, [...] Made whatever signal indicates a stop configurable (via macro STOP_SIGNAL). (main): Setup use of above as a signal handler. Added check for "-nw" in args already processed. (command_line_input): SIGTSTP ==>STOP_SIGNAL. ~~~ Support for Convex Unix is long gone, and nothing else overrides STOP_SIGNAL. So just use SIGTSTP directly, removing a little obfuscation. (I don't really understand why we override [1] readline's SIGTSTP handler (only) when reading scripts (and then fail to restore it properly, assuming SIG_DFL...), but I'll leave that for another pass. [1] - Actually, starting with readline 6.3, readline is no longer installing its handlers while GDB is in control...) gdb/ChangeLog: 2017-11-06 Pedro Alves <palves@redhat.com> * event-top.c: Check SIGTSTP instead of STOP_SIGNAL thoughout. (async_init_signals): Adjust. (handle_stop_sig): Rename to ... (handle_sigtstp): ... this. (async_stop_sig): Rename to ... (async_sigtstp_handler): ... this, and delete STOP_SIGNAL != SIGTSTP path. * event-top.h: Move signal.h include to the top. Check SIGTSTP instead of STOP_SIGNAL thoughout. (handle_stop_sig): Rename to ... (handle_sigtstp): ... this. * top.c (command_line_input): Replace STOP_SIGNAL -> SIGTSTP.
2017-11-06 16:36:47 +01:00
signal (SIGTSTP, SIG_DFL);
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
#endif
1999-06-21 15:27:42 +02:00
return cmd;
1999-06-21 15:27:42 +02:00
}
Remove some text from --version output I happened to notice recently that "gdb --version" says: GNU gdb (GDB) 8.0.50.20170911-git Copyright (C) 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-pc-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". This is a bit on the wordy side, but also references interactive commands, which I think doesn't really make sense for --version. This patch removes some text from --version, while leaving it in the "show version" output. It also adds a newline between the URLs and the "For help, ..." text, because I thought that was easier to read. Finally, it indents one of the URLs, since that was simpler to read, but not the other URL, because the current format is specified by the GNU coding standards section on "--version". Now the --version output looks like: GNU gdb (GDB) 8.1.50.20180511-git Copyright (C) 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Tested by the buildbot. gdb/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * cli/cli-cmds.c (show_version): Update. * top.c (print_gdb_version): Add "interactive" parameter. Update. * main.c (captured_main_1): Update. * top.h (print_gdb_version): Add "interactive" parameter and a comment. gdb/testsuite/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * gdb.base/default.exp: Update expected "show version" output.
2018-05-11 20:21:03 +02:00
/* See top.h. */
1999-06-21 15:27:42 +02:00
void
Remove some text from --version output I happened to notice recently that "gdb --version" says: GNU gdb (GDB) 8.0.50.20170911-git Copyright (C) 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-pc-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". This is a bit on the wordy side, but also references interactive commands, which I think doesn't really make sense for --version. This patch removes some text from --version, while leaving it in the "show version" output. It also adds a newline between the URLs and the "For help, ..." text, because I thought that was easier to read. Finally, it indents one of the URLs, since that was simpler to read, but not the other URL, because the current format is specified by the GNU coding standards section on "--version". Now the --version output looks like: GNU gdb (GDB) 8.1.50.20180511-git Copyright (C) 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Tested by the buildbot. gdb/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * cli/cli-cmds.c (show_version): Update. * top.c (print_gdb_version): Add "interactive" parameter. Update. * main.c (captured_main_1): Update. * top.h (print_gdb_version): Add "interactive" parameter and a comment. gdb/testsuite/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * gdb.base/default.exp: Update expected "show version" output.
2018-05-11 20:21:03 +02:00
print_gdb_version (struct ui_file *stream, bool interactive)
1999-06-21 15:27:42 +02:00
{
/* From GNU coding standards, first line is meant to be easy for a
program to parse, and is just canonical program name and version
number, which starts after last space. */
1999-06-21 15:27:42 +02:00
ui_file_style style;
if (interactive)
{
ui_file_style nstyle = { ui_file_style::MAGENTA, ui_file_style::NONE,
ui_file_style::BOLD };
style = nstyle;
}
fprintf_styled (stream, style, "GNU gdb %s%s\n", PKGVERSION, version);
1999-06-21 15:27:42 +02:00
/* Second line is a copyright notice. */
1999-06-21 15:27:42 +02:00
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
fprintf_filtered (stream,
"Copyright (C) 2020 Free Software Foundation, Inc.\n");
1999-06-21 15:27:42 +02:00
/* Following the copyright is a brief statement that the program is
free software, that users are free to copy and change it on
certain conditions, that it is covered by the GNU GPL, and that
there is no warranty. */
1999-06-21 15:27:42 +02:00
fprintf_filtered (stream, "\
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>\
\nThis is free software: you are free to change and redistribute it.\n\
Remove some text from --version output I happened to notice recently that "gdb --version" says: GNU gdb (GDB) 8.0.50.20170911-git Copyright (C) 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-pc-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". This is a bit on the wordy side, but also references interactive commands, which I think doesn't really make sense for --version. This patch removes some text from --version, while leaving it in the "show version" output. It also adds a newline between the URLs and the "For help, ..." text, because I thought that was easier to read. Finally, it indents one of the URLs, since that was simpler to read, but not the other URL, because the current format is specified by the GNU coding standards section on "--version". Now the --version output looks like: GNU gdb (GDB) 8.1.50.20180511-git Copyright (C) 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Tested by the buildbot. gdb/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * cli/cli-cmds.c (show_version): Update. * top.c (print_gdb_version): Add "interactive" parameter. Update. * main.c (captured_main_1): Update. * top.h (print_gdb_version): Add "interactive" parameter and a comment. gdb/testsuite/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * gdb.base/default.exp: Update expected "show version" output.
2018-05-11 20:21:03 +02:00
There is NO WARRANTY, to the extent permitted by law.");
if (!interactive)
return;
fprintf_filtered (stream, ("\nType \"show copying\" and "
"\"show warranty\" for details.\n"));
1999-06-21 15:27:42 +02:00
/* After the required info we print the configuration information. */
1999-06-21 15:27:42 +02:00
fprintf_filtered (stream, "This GDB was configured as \"");
2003-11-07 Andrew Cagney <cagney@redhat.com> * top.c (print_gdb_version): Replace STREQ with strcmp. * valops.c (value_struct_elt_for_reference): Ditto. (value_struct_elt_for_reference): Ditto. * symtab.c (gdb_mangle_name): Ditto. (find_line_symtab): Ditto. * symmisc.c (maintenance_print_symbols): Ditto. * symfile.c (symbol_file_command): Ditto. * stabsread.c (define_symbol, read_type): Ditto. (cleanup_undefined_types, scan_file_globals): Ditto. * solib.c (solib_map_sections): Ditto. * solib-svr4.c (bfd_lookup_symbol): Ditto. * rs6000-tdep.c (skip_prologue): Ditto. * p-valprint.c (pascal_value_print): Ditto. (pascal_object_is_vtbl_ptr_type): Ditto. * objfiles.c (in_plt_section): Ditto. * minsyms.c (lookup_minimal_symbol): Ditto. (compact_minimal_symbols): Ditto. (find_solib_trampoline_target): Ditto. * mdebugread.c (parse_type): Ditto. * language.c (set_language_command): Ditto. (set_type_command, set_range_command): Ditto. * f-lang.c (add_common_block): Ditto. (add_common_block): Ditto. (find_first_common_named): Ditto. (patch_all_commons_by_name): Ditto. * elfread.c (elf_locate_sections): Ditto. (elf_locate_sections): Ditto. (elfstab_offset_sections): Ditto. * dwarf2read.c (dwarf2_locate_sections): Ditto. * dbxread.c (add_old_header_file): Ditto. (find_corresponding_bincl_psymtab): Ditto. (read_dbx_symtab, process_one_symbol): Ditto. * coffread.c (patch_opaque_types): Ditto. * cli/cli-decode.c (delete_cmd): Ditto. * cli/cli-cmds.c (pwd_command, list_command): Ditto. * c-typeprint.c (c_type_print_base): Ditto. * breakpoint.c (bpstat_stop_status): Ditto. (clear_command, breakpoint_re_set_one): Ditto.
2003-11-08 01:13:03 +01:00
if (strcmp (host_name, target_name) != 0)
1999-06-21 15:27:42 +02:00
{
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
fprintf_filtered (stream, "--host=%s --target=%s",
host_name, target_name);
1999-06-21 15:27:42 +02:00
}
else
{
fprintf_filtered (stream, "%s", host_name);
}
Remove some text from --version output I happened to notice recently that "gdb --version" says: GNU gdb (GDB) 8.0.50.20170911-git Copyright (C) 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-pc-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". This is a bit on the wordy side, but also references interactive commands, which I think doesn't really make sense for --version. This patch removes some text from --version, while leaving it in the "show version" output. It also adds a newline between the URLs and the "For help, ..." text, because I thought that was easier to read. Finally, it indents one of the URLs, since that was simpler to read, but not the other URL, because the current format is specified by the GNU coding standards section on "--version". Now the --version output looks like: GNU gdb (GDB) 8.1.50.20180511-git Copyright (C) 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Tested by the buildbot. gdb/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * cli/cli-cmds.c (show_version): Update. * top.c (print_gdb_version): Add "interactive" parameter. Update. * main.c (captured_main_1): Update. * top.h (print_gdb_version): Add "interactive" parameter and a comment. gdb/testsuite/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * gdb.base/default.exp: Update expected "show version" output.
2018-05-11 20:21:03 +02:00
fprintf_filtered (stream, "\".\n");
fprintf_filtered (stream, _("Type \"show configuration\" "
"for configuration details.\n"));
2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * main.c (print_gdb_help): Use REPORT_BUGS_TO for bug-reporting address. * top.c (print_gdb_version): Use PKGVERSION and REPORT_BUGS_TO. doc: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Include ../../config/acx.m4. Use ACX_PKGVERSION and ACX_BUGURL. * configure: Regenerate. * Makefile.in (PKGVERSION, BUGURL_TEXI): Define. (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT. * gdb.texinfo: Use VERSION_PACKAGE and BUGURL. Remove mailing-list-specific text about bug reporting unless BUGURL_DEFAULT. gdbserver: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Makefile.in (gdbreplay$(EXEEXT)): Add version.o. * server.c (gdbserver_version): Print PKGVERSION. (gdbsrever_usage): Add stream parameter. Print REPORT_BUGS_TO. (main): Adjust gdbserver_usage calls. * gdbreplay.c (version, host_name): Add declarations. (gdbreplay_version, gdbreplay_usage): New. (main): Accept --version and --help options.
2008-06-06 00:36:57 +02:00
if (REPORT_BUGS_TO[0])
{
fprintf_filtered (stream,
Remove some text from --version output I happened to notice recently that "gdb --version" says: GNU gdb (GDB) 8.0.50.20170911-git Copyright (C) 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-pc-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". This is a bit on the wordy side, but also references interactive commands, which I think doesn't really make sense for --version. This patch removes some text from --version, while leaving it in the "show version" output. It also adds a newline between the URLs and the "For help, ..." text, because I thought that was easier to read. Finally, it indents one of the URLs, since that was simpler to read, but not the other URL, because the current format is specified by the GNU coding standards section on "--version". Now the --version output looks like: GNU gdb (GDB) 8.1.50.20180511-git Copyright (C) 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Tested by the buildbot. gdb/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * cli/cli-cmds.c (show_version): Update. * top.c (print_gdb_version): Add "interactive" parameter. Update. * main.c (captured_main_1): Update. * top.h (print_gdb_version): Add "interactive" parameter and a comment. gdb/testsuite/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * gdb.base/default.exp: Update expected "show version" output.
2018-05-11 20:21:03 +02:00
_("For bug reporting instructions, please see:\n"));
fprintf_filtered (stream, "%s.\n", REPORT_BUGS_TO);
2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * main.c (print_gdb_help): Use REPORT_BUGS_TO for bug-reporting address. * top.c (print_gdb_version): Use PKGVERSION and REPORT_BUGS_TO. doc: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * configure.ac: Include ../../config/acx.m4. Use ACX_PKGVERSION and ACX_BUGURL. * configure: Regenerate. * Makefile.in (PKGVERSION, BUGURL_TEXI): Define. (GDBvn.texi): Define VERSION_PACKAGE, BUGURL and BUGURL_DEFAULT. * gdb.texinfo: Use VERSION_PACKAGE and BUGURL. Remove mailing-list-specific text about bug reporting unless BUGURL_DEFAULT. gdbserver: 2008-06-05 Vladimir Prus <vladimir@codesourcery.com> Nathan Sidwell <nathan@codesourcery.com> Joseph Myers <joseph@codesourcery.com> * acinclude.m4: Include ../../config/acx.m4. * configure.ac: Use ACX_PKGVERSION and ACX_BUGURL. * configure, config.in: Regenerate. * Makefile.in (gdbreplay$(EXEEXT)): Add version.o. * server.c (gdbserver_version): Print PKGVERSION. (gdbsrever_usage): Add stream parameter. Print REPORT_BUGS_TO. (main): Adjust gdbserver_usage calls. * gdbreplay.c (version, host_name): Add declarations. (gdbreplay_version, gdbreplay_usage): New. (main): Accept --version and --help options.
2008-06-06 00:36:57 +02:00
}
fprintf_filtered (stream,
_("Find the GDB manual and other documentation \
Remove some text from --version output I happened to notice recently that "gdb --version" says: GNU gdb (GDB) 8.0.50.20170911-git Copyright (C) 2017 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-pc-linux-gnu". Type "show configuration" for configuration details. For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>. Find the GDB manual and other documentation resources online at: <http://www.gnu.org/software/gdb/documentation/>. For help, type "help". Type "apropos word" to search for commands related to "word". This is a bit on the wordy side, but also references interactive commands, which I think doesn't really make sense for --version. This patch removes some text from --version, while leaving it in the "show version" output. It also adds a newline between the URLs and the "For help, ..." text, because I thought that was easier to read. Finally, it indents one of the URLs, since that was simpler to read, but not the other URL, because the current format is specified by the GNU coding standards section on "--version". Now the --version output looks like: GNU gdb (GDB) 8.1.50.20180511-git Copyright (C) 2018 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Tested by the buildbot. gdb/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * cli/cli-cmds.c (show_version): Update. * top.c (print_gdb_version): Add "interactive" parameter. Update. * main.c (captured_main_1): Update. * top.h (print_gdb_version): Add "interactive" parameter and a comment. gdb/testsuite/ChangeLog 2018-06-05 Tom Tromey <tom@tromey.com> * gdb.base/default.exp: Update expected "show version" output.
2018-05-11 20:21:03 +02:00
resources online at:\n <http://www.gnu.org/software/gdb/documentation/>."));
fprintf_filtered (stream, "\n\n");
fprintf_filtered (stream, _("For help, type \"help\".\n"));
fprintf_filtered (stream,
_("Type \"apropos word\" to search for commands \
related to \"word\"."));
1999-06-21 15:27:42 +02:00
}
/* Print the details of GDB build-time configuration. */
void
print_gdb_configuration (struct ui_file *stream)
{
fprintf_filtered (stream, _("\
This GDB was configured as follows:\n\
configure --host=%s --target=%s\n\
"), host_name, target_name);
fprintf_filtered (stream, _("\
--with-auto-load-dir=%s\n\
--with-auto-load-safe-path=%s\n\
"), AUTO_LOAD_DIR, AUTO_LOAD_SAFE_PATH);
#if HAVE_LIBEXPAT
fprintf_filtered (stream, _("\
--with-expat\n\
"));
#else
fprintf_filtered (stream, _("\
--without-expat\n\
"));
#endif
if (GDB_DATADIR[0])
fprintf_filtered (stream, _("\
--with-gdb-datadir=%s%s\n\
"), GDB_DATADIR, GDB_DATADIR_RELOCATABLE ? " (relocatable)" : "");
#ifdef ICONV_BIN
fprintf_filtered (stream, _("\
--with-iconv-bin=%s%s\n\
"), ICONV_BIN, ICONV_BIN_RELOCATABLE ? " (relocatable)" : "");
#endif
if (JIT_READER_DIR[0])
fprintf_filtered (stream, _("\
--with-jit-reader-dir=%s%s\n\
"), JIT_READER_DIR, JIT_READER_DIR_RELOCATABLE ? " (relocatable)" : "");
#if HAVE_LIBUNWIND_IA64_H
fprintf_filtered (stream, _("\
--with-libunwind-ia64\n\
"));
#else
fprintf_filtered (stream, _("\
--without-libunwind-ia64\n\
"));
#endif
#if HAVE_LIBLZMA
fprintf_filtered (stream, _("\
--with-lzma\n\
"));
#else
fprintf_filtered (stream, _("\
--without-lzma\n\
"));
#endif
#if HAVE_LIBBABELTRACE
fprintf_filtered (stream, _("\
--with-babeltrace\n\
"));
#else
fprintf_filtered (stream, _("\
2019-12-21 08:40:41 +01:00
--without-babeltrace\n\
"));
#endif
#if HAVE_LIBIPT
fprintf_filtered (stream, _("\
--with-intel-pt\n\
"));
#else
fprintf_filtered (stream, _("\
--without-intel-pt\n\
"));
#endif
#if HAVE_LIBMPFR
fprintf_filtered (stream, _("\
--with-mpfr\n\
"));
#else
fprintf_filtered (stream, _("\
--without-mpfr\n\
"));
#endif
#if HAVE_LIBXXHASH
fprintf_filtered (stream, _("\
--with-xxhash\n\
"));
#else
fprintf_filtered (stream, _("\
--without-xxhash\n\
"));
#endif
#ifdef WITH_PYTHON_PATH
fprintf_filtered (stream, _("\
--with-python=%s%s\n\
"), WITH_PYTHON_PATH, PYTHON_PATH_RELOCATABLE ? " (relocatable)" : "");
#else
fprintf_filtered (stream, _("\
--without-python\n\
"));
#endif
Add debuginfod support to GDB debuginfod is a lightweight web service that indexes ELF/DWARF debugging resources by build-id and serves them over HTTP. This patch enables GDB to query debuginfod servers for separate debug files and source code when it is otherwise not able to find them. GDB can be built with debuginfod using the --with-debuginfod configure option. This requires that libdebuginfod be installed and found at configure time. debuginfod is packaged with elfutils, starting with version 0.178. For more information see https://sourceware.org/elfutils/. Tested on x86_64 Fedora 31. gdb/ChangeLog: 2020-02-26 Aaron Merey <amerey@redhat.com> * Makefile.in: Handle optional debuginfod support. * NEWS: Update. * README: Add --with-debuginfod summary. * config.in: Regenerate. * configure: Regenerate. * configure.ac: Handle optional debuginfod support. * debuginfod-support.c: debuginfod helper functions. * debuginfod-support.h: Ditto. * doc/gdb.texinfo: Add --with-debuginfod to configure options summary. * dwarf2/read.c (dwarf2_get_dwz_file): Query debuginfod servers when a dwz file cannot be found. * elfread.c (elf_symfile_read): Query debuginfod servers when a debuginfo file cannot be found. * source.c (open_source_file): Query debuginfod servers when a source file cannot be found. * top.c (print_gdb_configuration): Include --{with,without}-debuginfod in the output. gdb/testsuite/ChangeLog: 2020-02-26 Aaron Merey <amerey@redhat.com> * gdb.debuginfod: New directory for debuginfod tests. * gdb.debuginfod/main.c: New test file. * gdb.debuginfod/fetch_src_and_symbols.exp: New tests.
2020-02-26 23:40:49 +01:00
#if HAVE_LIBDEBUGINFOD
fprintf_filtered (stream, _("\
--with-debuginfod\n\
"));
#else
fprintf_filtered (stream, _("\
--without-debuginfod\n\
"));
#endif
#if HAVE_GUILE
fprintf_filtered (stream, _("\
--with-guile\n\
"));
#else
fprintf_filtered (stream, _("\
--without-guile\n\
"));
#endif
#if HAVE_SOURCE_HIGHLIGHT
fprintf_filtered (stream, _("\
--enable-source-highlight\n\
"));
#else
fprintf_filtered (stream, _("\
--disable-source-highlight\n\
"));
#endif
#ifdef RELOC_SRCDIR
fprintf_filtered (stream, _("\
--with-relocated-sources=%s\n\
"), RELOC_SRCDIR);
#endif
if (DEBUGDIR[0])
fprintf_filtered (stream, _("\
--with-separate-debug-dir=%s%s\n\
"), DEBUGDIR, DEBUGDIR_RELOCATABLE ? " (relocatable)" : "");
if (TARGET_SYSTEM_ROOT[0])
fprintf_filtered (stream, _("\
--with-sysroot=%s%s\n\
"), TARGET_SYSTEM_ROOT, TARGET_SYSTEM_ROOT_RELOCATABLE ? " (relocatable)" : "");
if (SYSTEM_GDBINIT[0])
fprintf_filtered (stream, _("\
--with-system-gdbinit=%s%s\n\
"), SYSTEM_GDBINIT, SYSTEM_GDBINIT_RELOCATABLE ? " (relocatable)" : "");
if (SYSTEM_GDBINIT_DIR[0])
fprintf_filtered (stream, _("\
--with-system-gdbinit-dir=%s%s\n\
"), SYSTEM_GDBINIT_DIR, SYSTEM_GDBINIT_DIR_RELOCATABLE ? " (relocatable)" : "");
/* We assume "relocatable" will be printed at least once, thus we always
print this text. It's a reasonably safe assumption for now. */
fprintf_filtered (stream, _("\n\
(\"Relocatable\" means the directory can be moved with the GDB installation\n\
tree, and GDB will still find it.)\n\
"));
}
1999-06-21 15:27:42 +02:00
/* The current top level prompt, settable with "set prompt", and/or
with the python `gdb.prompt_hook' hook. */
static char *top_prompt;
1999-06-21 15:27:42 +02:00
/* Access method for the GDB prompt string. */
char *
get_prompt (void)
{
return top_prompt;
}
/* Set method for the GDB prompt string. */
void
set_prompt (const char *s)
{
char *p = xstrdup (s);
xfree (top_prompt);
top_prompt = p;
1999-06-21 15:27:42 +02:00
}
1999-07-07 22:19:36 +02:00
/* Kills or detaches the given inferior, depending on how we originally
gained control of it. */
1999-06-21 15:27:42 +02:00
static void
kill_or_detach (inferior *inf, int from_tty)
{
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 11:51:43 +02:00
if (inf->pid == 0)
return;
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 11:51:43 +02:00
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
thread_info *thread = any_thread_of_inferior (inf);
if (thread != NULL)
1999-06-21 15:27:42 +02:00
{
Use thread_info and inferior pointers more throughout This is more preparation bits for multi-target support. In a multi-target scenario, we need to address the case of different processes/threads running on different targets that happen to have the same PID/PTID. E.g., we can have both process 123 in target 1, and process 123 in target 2, while they're in reality different processes running on different machines. Or maybe we've loaded multiple instances of the same core file. Etc. To address this, in my WIP multi-target branch, threads and processes are uniquely identified by the (process_stratum target_ops *, ptid_t) and (process_stratum target_ops *, pid) tuples respectively. I.e., each process_stratum instance has its own thread/process number space. As you can imagine, that requires passing around target_ops * pointers in a number of functions where we're currently passing only a ptid_t or an int. E.g., when we look up a thread_info object by ptid_t in find_thread_ptid, the ptid_t alone isn't sufficient. In many cases though, we already have the thread_info or inferior pointer handy, but we "lose" it somewhere along the call stack, only to look it up again by ptid_t/pid. Since thread_info or inferior objects know their parent target, if we pass around thread_info or inferior pointers when possible, we avoid having to add extra target_ops parameters to many functions, and also, we eliminate a number of by ptid_t/int lookups. So that's what this patch does. In a bit more detail: - Changes a number of functions and methods to take a thread_info or inferior pointer instead of a ptid_t or int parameter. - Changes a number of structure fields from ptid_t/int to inferior or thread_info pointers. - Uses the inferior_thread() function whenever possible instead of inferior_ptid. - Uses thread_info pointers directly when possible instead of the is_running/is_stopped etc. routines that require a lookup. - A number of functions are eliminated along the way, such as: int valid_gdb_inferior_id (int num); int pid_to_gdb_inferior_id (int pid); int gdb_inferior_id_to_pid (int num); int in_inferior_list (int pid); - A few structures and places hold a thread_info pointer across inferior execution, so now they take a strong reference to the (refcounted) thread_info object to avoid the thread_info pointer getting stale. This is done in enable_thread_stack_temporaries and in the infcall.c code. - Related, there's a spot in infcall.c where using a RAII object to handle the refcount would be handy, so a gdb::ref_ptr specialization for thread_info is added (thread_info_ref, in gdbthread.h), along with a gdb_ref_ptr policy that works for all refcounted_object types (in common/refcounted-object.h). gdb/ChangeLog: 2018-06-21 Pedro Alves <palves@redhat.com> * ada-lang.h (ada_get_task_number): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * ada-tasks.c (ada_get_task_number): Likewise. All callers adjusted. (print_ada_task_info, display_current_task_id, task_command_1): Adjust. * breakpoint.c (watchpoint_in_thread_scope): Adjust to use inferior_thread. (breakpoint_kind): Adjust. (remove_breakpoints_pid): Rename to ... (remove_breakpoints_inf): ... this. Adjust to take an inferior pointer. All callers adjusted. (bpstat_clear_actions): Use inferior_thread. (get_bpstat_thread): New. (bpstat_do_actions): Use it. (bpstat_check_breakpoint_conditions, bpstat_stop_status): Adjust to take a thread_info pointer. All callers adjusted. (set_longjmp_breakpoint_for_call_dummy, set_momentary_breakpoint) (breakpoint_re_set_thread): Use inferior_thread. * breakpoint.h (struct inferior): Forward declare. (bpstat_stop_status): Update. (remove_breakpoints_pid): Delete. (remove_breakpoints_inf): New. * bsd-uthread.c (bsd_uthread_target::wait) (bsd_uthread_target::update_thread_list): Use find_thread_ptid. * btrace.c (btrace_add_pc, btrace_enable, btrace_fetch) (maint_btrace_packet_history_cmd) (maint_btrace_clear_packet_history_cmd): Adjust. (maint_btrace_clear_cmd, maint_info_btrace_cmd): Adjust to use inferior_thread. * cli/cli-interp.c: Include "inferior.h". * common/refcounted-object.h (struct refcounted_object_ref_policy): New. * compile/compile-object-load.c: Include gdbthread.h. (store_regs): Use inferior_thread. * corelow.c (core_target::close): Use current_inferior. (core_target_open): Adjust to use first_thread_of_inferior and use the current inferior. * ctf.c (ctf_target::close): Adjust to use current_inferior. * dummy-frame.c (dummy_frame_id) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. (dummy_frame_pop, dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * dummy-frame.h (dummy_frame_push, dummy_frame_pop) (dummy_frame_discard, register_dummy_frame_dtor): Take a thread_info pointer instead of a ptid_t. * elfread.c: Include "inferior.h". (elf_gnu_ifunc_resolver_stop, elf_gnu_ifunc_resolver_return_stop): Use inferior_thread. * eval.c (evaluate_subexp): Likewise. * frame.c (frame_pop, has_stack_frames, find_frame_sal): Use inferior_thread. * gdb_proc_service.h (struct thread_info): Forward declare. (struct ps_prochandle) <ptid>: Delete, replaced by ... <thread>: ... this new field. All references adjusted. * gdbarch.h, gdbarch.c: Regenerate. * gdbarch.sh (get_syscall_number): Replace 'ptid' parameter with a 'thread' parameter. All implementations and callers adjusted. * gdbthread.h (thread_info) <set_running>: New method. (delete_thread, delete_thread_silent): Take a thread_info pointer instead of a ptid. (global_thread_id_to_ptid, ptid_to_global_thread_id): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_live_thread_of_process): Delete, replaced by ... (any_live_thread_of_inferior): ... this new function. All callers adjusted. (switch_to_thread, switch_to_no_thread): Declare. (is_executing): Delete. (enable_thread_stack_temporaries): Update comment. <enable_thread_stack_temporaries>: Take a thread_info pointer instead of a ptid_t. Incref the thread. <~enable_thread_stack_temporaries>: Decref the thread. <m_ptid>: Delete <m_thr>: New. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (get_last_thread_stack_temporary) (value_in_thread_stack_temporaries, can_access_registers_thread): Take a thread_info pointer instead of a ptid_t. All callers adjusted. * infcall.c (get_call_return_value): Use inferior_thread. (run_inferior_call): Work with thread pointers instead of ptid_t. (call_function_by_hand_dummy): Work with thread pointers instead of ptid_t. Use thread_info_ref. * infcmd.c (proceed_thread_callback): Access thread's state directly. (ensure_valid_thread, ensure_not_running): Use inferior_thread, access thread's state directly. (continue_command): Use inferior_thread. (info_program_command): Use find_thread_ptid and access thread state directly. (proceed_after_attach_callback): Use thread state directly. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (exit_inferior): Take an inferior pointer instead of a pid. All callers adjusted. (exit_inferior_silent): New. (detach_inferior): Delete. (valid_gdb_inferior_id, pid_to_gdb_inferior_id) (gdb_inferior_id_to_pid, in_inferior_list): Delete. (detach_inferior_command, kill_inferior_command): Use find_inferior_id instead of valid_gdb_inferior_id and gdb_inferior_id_to_pid. (inferior_command): Use inferior and thread pointers. * inferior.h (struct thread_info): Forward declare. (notice_new_inferior): Take a thread_info pointer instead of a ptid_t. All callers adjusted. (detach_inferior): Delete declaration. (exit_inferior, exit_inferior_silent): Take an inferior pointer instead of a pid. All callers adjusted. (gdb_inferior_id_to_pid, pid_to_gdb_inferior_id, in_inferior_list) (valid_gdb_inferior_id): Delete. * infrun.c (follow_fork_inferior, proceed_after_vfork_done) (handle_vfork_child_exec_or_exit, follow_exec): Adjust. (struct displaced_step_inferior_state) <pid>: Delete, replaced by ... <inf>: ... this new field. <step_ptid>: Delete, replaced by ... <step_thread>: ... this new field. (get_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_in_progress_any_inferior): Adjust. (displaced_step_in_progress_thread): Take a thread pointer instead of a ptid_t. All callers adjusted. (displaced_step_in_progress, add_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (get_displaced_step_closure_by_addr): Adjust. (remove_displaced_stepping_state): Take an inferior pointer instead of a pid. All callers adjusted. (displaced_step_prepare_throw, displaced_step_prepare) (displaced_step_fixup): Take a thread pointer instead of a ptid_t. All callers adjusted. (start_step_over): Adjust. (infrun_thread_ptid_changed): Remove bit updating ptids in the displaced step queue. (do_target_resume): Adjust. (fetch_inferior_event): Use inferior_thread. (context_switch, get_inferior_stop_soon): Take an execution_control_state pointer instead of a ptid_t. All callers adjusted. (switch_to_thread_cleanup): Delete. (stop_all_threads): Use scoped_restore_current_thread. * inline-frame.c: Include "gdbthread.h". (inline_state) <inline_state>: Take a thread pointer instead of a ptid_t. All callers adjusted. <ptid>: Delete, replaced by ... <thread>: ... this new field. (find_inline_frame_state): Take a thread pointer instead of a ptid_t. All callers adjusted. (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Take a thread pointer instead of a ptid_t. All callers adjusted. * inline-frame.h (skip_inline_frames, step_into_inline_frame) (inline_skipped_frames, inline_skipped_symbol): Likewise. * linux-fork.c (delete_checkpoint_command): Adjust to use thread pointers directly. * linux-nat.c (get_detach_signal): Likewise. * linux-thread-db.c (thread_from_lwp): New 'stopped' parameter. (thread_db_notice_clone): Adjust. (thread_db_find_new_threads_silently) (thread_db_find_new_threads_2, thread_db_find_new_threads_1): Take a thread pointer instead of a ptid_t. All callers adjusted. * mi/mi-cmd-var.c: Include "inferior.h". (mi_cmd_var_update_iter): Update to use thread pointers. * mi/mi-interp.c (mi_new_thread): Update to use the thread's inferior directly. (mi_output_running_pid, mi_inferior_count): Delete, bits factored out to ... (mi_output_running): ... this new function. (mi_on_resume_1): Adjust to use it. (mi_user_selected_context_changed): Adjust to use inferior_thread. * mi/mi-main.c (proceed_thread): Adjust to use thread pointers directly. (interrupt_thread_callback): : Adjust to use thread and inferior pointers. * proc-service.c: Include "gdbthread.h". (ps_pglobal_lookup): Adjust to use the thread's inferior directly. * progspace-and-thread.c: Include "inferior.h". * progspace.c: Include "inferior.h". * python/py-exitedevent.c (create_exited_event_object): Adjust to hold a reference to an inferior_object. * python/py-finishbreakpoint.c (bpfinishpy_init): Adjust to use inferior_thread. * python/py-inferior.c (struct inferior_object): Give the type a tag name instead of a typedef. (python_on_normal_stop): No need to check if the current thread is listed. (inferior_to_inferior_object): Change return type to inferior_object. All callers adjusted. (find_thread_object): Delete, bits factored out to ... (thread_to_thread_object): ... this new function. * python/py-infthread.c (create_thread_object): Use inferior_to_inferior_object. (thpy_is_stopped): Use thread pointer directly. (gdbpy_selected_thread): Use inferior_thread. * python/py-record-btrace.c (btpy_list_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (btpy_insn_or_gap_new): Drop const. (btpy_list_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-record.c: Include "gdbthread.h". (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. (gdbpy_current_recording): Use inferior_thread. * python/py-record.h (recpy_record_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_element_object) <ptid>: Delete field, replaced with ... <thread>: ... this new field. All users adjusted. (recpy_insn_new, recpy_func_new): Take a thread pointer instead of a ptid_t. All callers adjusted. * python/py-threadevent.c: Include "gdbthread.h". (get_event_thread): Use thread_to_thread_object. * python/python-internal.h (struct inferior_object): Forward declare. (find_thread_object, find_inferior_object): Delete declarations. (thread_to_thread_object, inferior_to_inferior_object): New declarations. * record-btrace.c: Include "inferior.h". (require_btrace_thread): Use inferior_thread. (record_btrace_frame_sniffer) (record_btrace_tailcall_frame_sniffer): Use inferior_thread. (get_thread_current_frame): Use scoped_restore_current_thread and switch_to_thread. (get_thread_current_frame): Use thread pointer directly. (record_btrace_replay_at_breakpoint): Use thread's inferior pointer directly. * record-full.c: Include "inferior.h". * regcache.c: Include "gdbthread.h". (get_thread_arch_regcache): Use the inferior's address space directly. (get_thread_regcache, registers_changed_thread): New. * regcache.h (get_thread_regcache(thread_info *thread)): New overload. (registers_changed_thread): New. (remote_target) <remote_detach_1>: Swap order of parameters. (remote_add_thread): <remote_add_thread>: Return the new thread. (get_remote_thread_info(ptid_t)): New overload. (remote_target::remote_notice_new_inferior): Use thread pointers directly. (remote_target::process_initial_stop_replies): Use thread_info::set_running. (remote_target::remote_detach_1, remote_target::detach) (extended_remote_target::detach): Adjust. * stack.c (frame_show_address): Use inferior_thread. * target-debug.h (target_debug_print_thread_info_pp): New. * target-delegates.c: Regenerate. * target.c (default_thread_address_space): Delete. (memory_xfer_partial_1): Use current_inferior. (target_detach): Use current_inferior. (target_thread_address_space): Delete. (generic_mourn_inferior): Use current_inferior. * target.h (struct target_ops) <thread_address_space>: Delete. (target_thread_address_space): Delete. * thread.c (init_thread_list): Use ALL_THREADS_SAFE. Use thread pointers directly. (delete_thread_1, delete_thread, delete_thread_silent): Take a thread pointer instead of a ptid_t. Adjust all callers. (ptid_to_global_thread_id, global_thread_id_to_ptid): Delete. (first_thread_of_process): Delete, replaced by ... (first_thread_of_inferior): ... this new function. All callers adjusted. (any_thread_of_process): Rename to ... (any_thread_of_inferior): ... this, and take an inferior pointer. (any_live_thread_of_process): Rename to ... (any_live_thread_of_inferior): ... this, and take an inferior pointer. (thread_stack_temporaries_enabled_p, push_thread_stack_temporary) (value_in_thread_stack_temporaries) (get_last_thread_stack_temporary): Take a thread pointer instead of a ptid_t. Adjust all callers. (thread_info::set_running): New. (validate_registers_access): Use inferior_thread. (can_access_registers_ptid): Rename to ... (can_access_registers_thread): ... this, and take a thread pointer. (print_thread_info_1): Adjust to compare thread pointers instead of ptids. (switch_to_no_thread, switch_to_thread): Make extern. (scoped_restore_current_thread::~scoped_restore_current_thread): Use m_thread pointer directly. (scoped_restore_current_thread::scoped_restore_current_thread): Use inferior_thread. (thread_command): Use thread pointer directly. (thread_num_make_value_helper): Use inferior_thread. * top.c (execute_command): Use inferior_thread. * tui/tui-interp.c: Include "inferior.h". * varobj.c (varobj_create): Use inferior_thread. (value_of_root_1): Use find_thread_global_id instead of global_thread_id_to_ptid.
2018-06-21 18:09:31 +02:00
switch_to_thread (thread);
* target.h (struct target_ops): Make to_has_all_memory, to_has_memory, to_has_stack, to_has_registers and to_has_execution methods instead of variables. (target_has_all_memory_1, target_has_memory_1, target_has_stack_1) (target_has_registers_1, target_has_execution_1): Declare functions. (target_has_all_memory): Rewrite to call target_has_all_memory_1. (target_has_memory): Rewrite to call target_has_memory_1. (target_has_stack): Rewrite to call target_has_all_stack_1. (target_has_registers): Rewrite to call target_has_registers_1. (target_has_execution): Rewrite to call target_has_execution_1. (default_child_has_all_memory, default_child_has_memory) (default_child_has_stack, default_child_has_registers) (default_child_has_execution): Declare. (target_mark_running, target_mark_exited): Delete declarations. * target.c (default_child_has_all_memory, default_child_has_memory, default_child_has_stack, default_child_has_registers, default_child_has_execution): New. (target_has_all_memory_1, target_has_memory_1, target_has_stack_1, target_has_registers_1, target_has_execution_1): New. (add_target): Default the to_has_all_memory, to_has_all_memory, to_has_memory, to_has_stack, to_has_registers and to_has_execution callbacks to return 0. (update_current_target): Do not inherit to_has_all_memory, to_has_memory, to_has_stack, to_has_registers or to_has_execution. (target_mark_running, target_mark_exited): Delete. (memory_xfer_partial): Adjust. (target_read_memory, target_write_memory, target_search_memory): Dispatch to the the top-most target, not the flattened current_target. (target_info): Adjust. (init_dummy_target): Install return_zero as callback for to_has_all_memory, to_has_memory, to_has_stack, to_has_registers, to_has_execution. (set_maintenance_target_async_permitted): Use have_live_inferiors instead of target_has_execution. * target-memory.c (target_write_memory_blocks): Dispatch memory writes to the the top-most target, not the flattened current_target. * breakpoint.c (insert_breakpoints): Don't check for target_has_execution here. (update_global_location_list): Check if there are live inferiors to debug instead of target_has_execution. * infcmd.c (kill_command, detach_command): Check if there are inferiors instead of target_has_execution. * inferior.h (have_live_inferiors): Declare. * inferior.c (have_live_inferiors): New. * infrun.c (normal_stop): Don't check for target_has_execution to finish the thread states. * thread.c (is_thread_state, is_stopped, is_exited, is_running) (any_running, is_executing): Remove checks for target_has_execution. * top.c (kill_or_detach): Don't try to kill core inferiors. (quit_target): Don't check for target_has_execution. * corelow.c (core_has_memory, core_has_stack, core_has_registers): New. (init_core_ops): Install core_has_memory, core_has_stack and core_has_registers. * exec.c (exec_has_memory): New. (init_exec_ops): Install exec_has_memory. * remote.c (remote_add_inferior): Don't call target_mark_running. (remote_start_remote): Don't call target_mark_exited or call target_mark_running. (remote_open_1): Use have_inferiors instead of target_has_execution. Don't use target_mark_exited. (init_remote_ops): Install deafult_child_has_all_memory, default_child_has_memory, default_child_has_stack, default_child_has_registers, default_child_has_execution. * bsd-kvm.c (bsd_kvm_return_one): New. (bsd_kvm_add_target): Register bsd_kvm_return_one as to_has_memory, to_has_stack and to_has_registers callbacks. * remote-m32r-sdi.c (m32r_return_one): New. (init_m32r_ops): Register it. * inf-child.c (inf_child_target): Adjust to register default_child_has_all_memory, default_child_has_memory, default_child_has_stack, default_child_has_registers, default_child_has_execution callbacks. * gnu-nat.c (init_gnu_ops): Likewise. * go32-nat.c (init_go32_ops): Likewise. * hpux-thread.c (init_hpux_thread_ops): Likewise. * monitor.c (init_base_monitor_ops): Likewise. * nto-procfs.c (init_procfs_ops): Likewise. * remote-mips.c (_initialize_remote_mips): Likewise. * windows-nat.c (init_windows_ops): Likewise. * remote-sim.c (gdbsim_create_inferior): Don't use target_mark_running or target_mark_exited. (gdbsim_mourn_inferior): Don't call target_mark_exited. (init_gdbsim_ops): Adjust to register default_child_has_all_memory, default_child_has_memory, default_child_has_stack, default_child_has_registers, default_child_has_execution callbacks. * linux-nat.c (linux_nat_xfer_partial): If reading memory, and there's no inferior selected, defer to a lower stratum.
2009-06-07 18:46:48 +02:00
/* Leave core files alone. */
if (target_has_execution)
{
if (inf->attach_flag)
target_detach (inf, from_tty);
* target.h (struct target_ops): Make to_has_all_memory, to_has_memory, to_has_stack, to_has_registers and to_has_execution methods instead of variables. (target_has_all_memory_1, target_has_memory_1, target_has_stack_1) (target_has_registers_1, target_has_execution_1): Declare functions. (target_has_all_memory): Rewrite to call target_has_all_memory_1. (target_has_memory): Rewrite to call target_has_memory_1. (target_has_stack): Rewrite to call target_has_all_stack_1. (target_has_registers): Rewrite to call target_has_registers_1. (target_has_execution): Rewrite to call target_has_execution_1. (default_child_has_all_memory, default_child_has_memory) (default_child_has_stack, default_child_has_registers) (default_child_has_execution): Declare. (target_mark_running, target_mark_exited): Delete declarations. * target.c (default_child_has_all_memory, default_child_has_memory, default_child_has_stack, default_child_has_registers, default_child_has_execution): New. (target_has_all_memory_1, target_has_memory_1, target_has_stack_1, target_has_registers_1, target_has_execution_1): New. (add_target): Default the to_has_all_memory, to_has_all_memory, to_has_memory, to_has_stack, to_has_registers and to_has_execution callbacks to return 0. (update_current_target): Do not inherit to_has_all_memory, to_has_memory, to_has_stack, to_has_registers or to_has_execution. (target_mark_running, target_mark_exited): Delete. (memory_xfer_partial): Adjust. (target_read_memory, target_write_memory, target_search_memory): Dispatch to the the top-most target, not the flattened current_target. (target_info): Adjust. (init_dummy_target): Install return_zero as callback for to_has_all_memory, to_has_memory, to_has_stack, to_has_registers, to_has_execution. (set_maintenance_target_async_permitted): Use have_live_inferiors instead of target_has_execution. * target-memory.c (target_write_memory_blocks): Dispatch memory writes to the the top-most target, not the flattened current_target. * breakpoint.c (insert_breakpoints): Don't check for target_has_execution here. (update_global_location_list): Check if there are live inferiors to debug instead of target_has_execution. * infcmd.c (kill_command, detach_command): Check if there are inferiors instead of target_has_execution. * inferior.h (have_live_inferiors): Declare. * inferior.c (have_live_inferiors): New. * infrun.c (normal_stop): Don't check for target_has_execution to finish the thread states. * thread.c (is_thread_state, is_stopped, is_exited, is_running) (any_running, is_executing): Remove checks for target_has_execution. * top.c (kill_or_detach): Don't try to kill core inferiors. (quit_target): Don't check for target_has_execution. * corelow.c (core_has_memory, core_has_stack, core_has_registers): New. (init_core_ops): Install core_has_memory, core_has_stack and core_has_registers. * exec.c (exec_has_memory): New. (init_exec_ops): Install exec_has_memory. * remote.c (remote_add_inferior): Don't call target_mark_running. (remote_start_remote): Don't call target_mark_exited or call target_mark_running. (remote_open_1): Use have_inferiors instead of target_has_execution. Don't use target_mark_exited. (init_remote_ops): Install deafult_child_has_all_memory, default_child_has_memory, default_child_has_stack, default_child_has_registers, default_child_has_execution. * bsd-kvm.c (bsd_kvm_return_one): New. (bsd_kvm_add_target): Register bsd_kvm_return_one as to_has_memory, to_has_stack and to_has_registers callbacks. * remote-m32r-sdi.c (m32r_return_one): New. (init_m32r_ops): Register it. * inf-child.c (inf_child_target): Adjust to register default_child_has_all_memory, default_child_has_memory, default_child_has_stack, default_child_has_registers, default_child_has_execution callbacks. * gnu-nat.c (init_gnu_ops): Likewise. * go32-nat.c (init_go32_ops): Likewise. * hpux-thread.c (init_hpux_thread_ops): Likewise. * monitor.c (init_base_monitor_ops): Likewise. * nto-procfs.c (init_procfs_ops): Likewise. * remote-mips.c (_initialize_remote_mips): Likewise. * windows-nat.c (init_windows_ops): Likewise. * remote-sim.c (gdbsim_create_inferior): Don't use target_mark_running or target_mark_exited. (gdbsim_mourn_inferior): Don't call target_mark_exited. (init_gdbsim_ops): Adjust to register default_child_has_all_memory, default_child_has_memory, default_child_has_stack, default_child_has_registers, default_child_has_execution callbacks. * linux-nat.c (linux_nat_xfer_partial): If reading memory, and there's no inferior selected, defer to a lower stratum.
2009-06-07 18:46:48 +02:00
else
target_kill ();
}
1999-06-21 15:27:42 +02:00
}
}
/* Prints info about what GDB will do to inferior INF on a "quit". OUT is
where to collect the output. */
static void
print_inferior_quit_action (inferior *inf, ui_file *out)
{
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 11:51:43 +02:00
if (inf->pid == 0)
return;
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 11:51:43 +02:00
if (inf->attach_flag)
fprintf_filtered (out,
_("\tInferior %d [%s] will be detached.\n"), inf->num,
Change pid_to_str to return std::string Currently the target pid_to_str method returns a const char *, so many implementations have a static buffer that they update. This patch changes these methods to return a std::string instead. I think this is cleaner and avoids possible gotchas when calling pid_to_str on different ptids in a single statement. (Though no such calls exist currently.) This also updates various helper functions, and the gdbarch pid_to_str methods. I also made a best effort to fix all the callers, but I can't build some of the *-nat.c files. Tested by the buildbot. gdb/ChangeLog 2019-03-13 Tom Tromey <tromey@adacore.com> * i386-gnu-nat.c (i386_gnu_nat_target::fetch_registers) (i386_gnu_nat_target::store_registers): Update. * target-debug.h (target_debug_print_std_string): New macro. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * windows-tdep.c (display_one_tib): Update. * tui/tui-stack.c (tui_make_status_line): Update. * top.c (print_inferior_quit_action): Update. * thread.c (thr_try_catch_cmd): Update. (add_thread_with_info): Update. (thread_target_id_str): Update. (thr_try_catch_cmd): Update. (thread_command): Update. (thread_find_command): Update. * record-btrace.c (record_btrace_target::info_record) (record_btrace_resume_thread, record_btrace_target::resume) (record_btrace_cancel_resume, record_btrace_step_thread) (record_btrace_target::wait, record_btrace_target::wait) (record_btrace_target::wait, record_btrace_target::stop): Update. * progspace.c (print_program_space): Update. * process-stratum-target.c (process_stratum_target::thread_address_space): Update. * linux-fork.c (linux_fork_mourn_inferior) (detach_checkpoint_command, info_checkpoints_command) (linux_fork_context): Update. (linux_fork_detach): Update. (class scoped_switch_fork_info): Update. (delete_checkpoint_command): Update. * infrun.c (follow_fork_inferior): Update. (follow_fork_inferior): Update. (proceed_after_vfork_done): Update. (handle_vfork_child_exec_or_exit): Update. (follow_exec): Update. (displaced_step_prepare_throw): Update. (displaced_step_restore): Update. (start_step_over): Update. (resume_1): Update. (clear_proceed_status_thread): Update. (proceed): Update. (print_target_wait_results): Update. (do_target_wait): Update. (context_switch): Update. (stop_all_threads): Update. (restart_threads): Update. (finish_step_over): Update. (handle_signal_stop): Update. (switch_back_to_stepped_thread): Update. (keep_going_pass_signal): Update. (print_exited_reason): Update. (normal_stop): Update. * inferior.c (inferior_pid_to_str): Change return type. (print_selected_inferior): Update. (add_inferior): Update. (detach_inferior): Update. * dummy-frame.c (fprint_dummy_frames): Update. * dcache.c (dcache_info_1): Update. * btrace.c (btrace_enable, btrace_disable, btrace_teardown) (btrace_fetch, btrace_clear): Update. * linux-tdep.c (linux_core_pid_to_str): Change return type. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Change return type. * fbsd-tdep.c (fbsd_core_pid_to_str): Change return type. * sol2-tdep.h (sol2_core_pid_to_str): Change return type. * sol2-tdep.c (sol2_core_pid_to_str): Change return type. * gdbarch.c, gdbarch.h: Rebuild. * gdbarch.sh (core_pid_to_str): Change return type. * windows-nat.c (struct windows_nat_target) <pid_to_str>: Change return type. (windows_nat_target::pid_to_str): Change return type. (windows_delete_thread): Update. (windows_nat_target::attach): Update. (windows_nat_target::files_info): Update. * target-delegates.c: Rebuild. * sol-thread.c (class sol_thread_target) <pid_to_str>: Change return type. (sol_thread_target::pid_to_str): Change return type. * remote.c (class remote_target) <pid_to_str>: Change return type. (remote_target::pid_to_str): Change return type. (extended_remote_target::attach, remote_target::remote_stop_ns) (remote_target::remote_notif_remove_queued_reply) (remote_target::push_stop_reply, remote_target::disable_btrace): Update. (extended_remote_target::attach): Update. * remote-sim.c (struct gdbsim_target) <pid_to_str>: Change return type. (gdbsim_target::pid_to_str): Change return type. * ravenscar-thread.c (struct ravenscar_thread_target) <pid_to_str>: Change return type. (ravenscar_thread_target::pid_to_str): Change return type. * procfs.c (class procfs_target) <pid_to_str>: Change return type. (procfs_target::pid_to_str): Change return type. (procfs_target::attach): Update. (procfs_target::detach): Update. (procfs_target::fetch_registers): Update. (procfs_target::store_registers): Update. (procfs_target::wait): Update. (procfs_target::files_info): Update. * obsd-nat.c (obsd_nat_target::pid_to_str): Change return type. * nto-procfs.c (struct nto_procfs_target) <pid_to_str>: Change return type. (nto_procfs_target::pid_to_str): Change return type. (nto_procfs_target::files_info, nto_procfs_target::attach): Update. * linux-thread-db.c (class thread_db_target) <pid_to_str>: Change return type. * linux-nat.c (linux_nat_target::pid_to_str): Change return type. (exit_lwp): Update. (attach_proc_task_lwp_callback, get_detach_signal) (detach_one_lwp, resume_lwp, linux_nat_target::resume) (linux_nat_target::resume, wait_lwp, stop_callback) (maybe_clear_ignore_sigint, stop_wait_callback, status_callback) (save_stop_reason, select_event_lwp, linux_nat_filter_event) (linux_nat_wait_1, resume_stopped_resumed_lwps) (linux_nat_target::wait, linux_nat_stop_lwp): Update. * inf-ptrace.c (inf_ptrace_target::pid_to_str): Change return type. (inf_ptrace_target::attach): Update. (inf_ptrace_target::files_info): Update. * go32-nat.c (struct go32_nat_target) <pid_to_str>: Change return type. (go32_nat_target::pid_to_str): Change return type. * gnu-nat.c (gnu_nat_target::pid_to_str): Change return type. (gnu_nat_target::wait): Update. (gnu_nat_target::wait): Update. (gnu_nat_target::resume): Update. * fbsd-nat.c (fbsd_nat_target::pid_to_str): Change return type. (fbsd_nat_target::wait): Update. * darwin-nat.c (darwin_nat_target::pid_to_str): Change return type. (darwin_nat_target::attach): Update. * corelow.c (class core_target) <pid_to_str>: Change return type. (core_target::pid_to_str): Change return type. * target.c (normal_pid_to_str): Change return type. (default_pid_to_str): Likewise. (target_pid_to_str): Change return type. (target_translate_tls_address): Update. (target_announce_detach): Update. * bsd-uthread.c (struct bsd_uthread_target) <pid_to_str>: Change return type. (bsd_uthread_target::pid_to_str): Change return type. * bsd-kvm.c (class bsd_kvm_target) <pid_to_str>: Change return type. (bsd_kvm_target::pid_to_str): Change return type. * aix-thread.c (class aix_thread_target) <pid_to_str>: Change return type. (aix_thread_target::pid_to_str): Change return type. * target.h (struct target_ops) <pid_to_str>: Change return type. (target_pid_to_str, normal_pid_to_str): Likewise. * obsd-nat.h (class obsd_nat_target) <pid_to_str>: Change return type. * linux-nat.h (class linux_nat_target) <pid_to_str>: Change return type. * inf-ptrace.h (struct inf_ptrace_target) <pid_to_str>: Change return type. * gnu-nat.h (struct gnu_nat_target) <pid_to_str>: Change return type. * fbsd-nat.h (class fbsd_nat_target) <pid_to_str>: Change return type. * darwin-nat.h (class darwin_nat_target) <pid_to_str>: Change return type.
2019-02-28 17:09:55 +01:00
target_pid_to_str (ptid_t (inf->pid)).c_str ());
else
fprintf_filtered (out,
_("\tInferior %d [%s] will be killed.\n"), inf->num,
Change pid_to_str to return std::string Currently the target pid_to_str method returns a const char *, so many implementations have a static buffer that they update. This patch changes these methods to return a std::string instead. I think this is cleaner and avoids possible gotchas when calling pid_to_str on different ptids in a single statement. (Though no such calls exist currently.) This also updates various helper functions, and the gdbarch pid_to_str methods. I also made a best effort to fix all the callers, but I can't build some of the *-nat.c files. Tested by the buildbot. gdb/ChangeLog 2019-03-13 Tom Tromey <tromey@adacore.com> * i386-gnu-nat.c (i386_gnu_nat_target::fetch_registers) (i386_gnu_nat_target::store_registers): Update. * target-debug.h (target_debug_print_std_string): New macro. * x86-linux-nat.c (x86_linux_nat_target::enable_btrace): Update. * windows-tdep.c (display_one_tib): Update. * tui/tui-stack.c (tui_make_status_line): Update. * top.c (print_inferior_quit_action): Update. * thread.c (thr_try_catch_cmd): Update. (add_thread_with_info): Update. (thread_target_id_str): Update. (thr_try_catch_cmd): Update. (thread_command): Update. (thread_find_command): Update. * record-btrace.c (record_btrace_target::info_record) (record_btrace_resume_thread, record_btrace_target::resume) (record_btrace_cancel_resume, record_btrace_step_thread) (record_btrace_target::wait, record_btrace_target::wait) (record_btrace_target::wait, record_btrace_target::stop): Update. * progspace.c (print_program_space): Update. * process-stratum-target.c (process_stratum_target::thread_address_space): Update. * linux-fork.c (linux_fork_mourn_inferior) (detach_checkpoint_command, info_checkpoints_command) (linux_fork_context): Update. (linux_fork_detach): Update. (class scoped_switch_fork_info): Update. (delete_checkpoint_command): Update. * infrun.c (follow_fork_inferior): Update. (follow_fork_inferior): Update. (proceed_after_vfork_done): Update. (handle_vfork_child_exec_or_exit): Update. (follow_exec): Update. (displaced_step_prepare_throw): Update. (displaced_step_restore): Update. (start_step_over): Update. (resume_1): Update. (clear_proceed_status_thread): Update. (proceed): Update. (print_target_wait_results): Update. (do_target_wait): Update. (context_switch): Update. (stop_all_threads): Update. (restart_threads): Update. (finish_step_over): Update. (handle_signal_stop): Update. (switch_back_to_stepped_thread): Update. (keep_going_pass_signal): Update. (print_exited_reason): Update. (normal_stop): Update. * inferior.c (inferior_pid_to_str): Change return type. (print_selected_inferior): Update. (add_inferior): Update. (detach_inferior): Update. * dummy-frame.c (fprint_dummy_frames): Update. * dcache.c (dcache_info_1): Update. * btrace.c (btrace_enable, btrace_disable, btrace_teardown) (btrace_fetch, btrace_clear): Update. * linux-tdep.c (linux_core_pid_to_str): Change return type. * i386-cygwin-tdep.c (i386_windows_core_pid_to_str): Change return type. * fbsd-tdep.c (fbsd_core_pid_to_str): Change return type. * sol2-tdep.h (sol2_core_pid_to_str): Change return type. * sol2-tdep.c (sol2_core_pid_to_str): Change return type. * gdbarch.c, gdbarch.h: Rebuild. * gdbarch.sh (core_pid_to_str): Change return type. * windows-nat.c (struct windows_nat_target) <pid_to_str>: Change return type. (windows_nat_target::pid_to_str): Change return type. (windows_delete_thread): Update. (windows_nat_target::attach): Update. (windows_nat_target::files_info): Update. * target-delegates.c: Rebuild. * sol-thread.c (class sol_thread_target) <pid_to_str>: Change return type. (sol_thread_target::pid_to_str): Change return type. * remote.c (class remote_target) <pid_to_str>: Change return type. (remote_target::pid_to_str): Change return type. (extended_remote_target::attach, remote_target::remote_stop_ns) (remote_target::remote_notif_remove_queued_reply) (remote_target::push_stop_reply, remote_target::disable_btrace): Update. (extended_remote_target::attach): Update. * remote-sim.c (struct gdbsim_target) <pid_to_str>: Change return type. (gdbsim_target::pid_to_str): Change return type. * ravenscar-thread.c (struct ravenscar_thread_target) <pid_to_str>: Change return type. (ravenscar_thread_target::pid_to_str): Change return type. * procfs.c (class procfs_target) <pid_to_str>: Change return type. (procfs_target::pid_to_str): Change return type. (procfs_target::attach): Update. (procfs_target::detach): Update. (procfs_target::fetch_registers): Update. (procfs_target::store_registers): Update. (procfs_target::wait): Update. (procfs_target::files_info): Update. * obsd-nat.c (obsd_nat_target::pid_to_str): Change return type. * nto-procfs.c (struct nto_procfs_target) <pid_to_str>: Change return type. (nto_procfs_target::pid_to_str): Change return type. (nto_procfs_target::files_info, nto_procfs_target::attach): Update. * linux-thread-db.c (class thread_db_target) <pid_to_str>: Change return type. * linux-nat.c (linux_nat_target::pid_to_str): Change return type. (exit_lwp): Update. (attach_proc_task_lwp_callback, get_detach_signal) (detach_one_lwp, resume_lwp, linux_nat_target::resume) (linux_nat_target::resume, wait_lwp, stop_callback) (maybe_clear_ignore_sigint, stop_wait_callback, status_callback) (save_stop_reason, select_event_lwp, linux_nat_filter_event) (linux_nat_wait_1, resume_stopped_resumed_lwps) (linux_nat_target::wait, linux_nat_stop_lwp): Update. * inf-ptrace.c (inf_ptrace_target::pid_to_str): Change return type. (inf_ptrace_target::attach): Update. (inf_ptrace_target::files_info): Update. * go32-nat.c (struct go32_nat_target) <pid_to_str>: Change return type. (go32_nat_target::pid_to_str): Change return type. * gnu-nat.c (gnu_nat_target::pid_to_str): Change return type. (gnu_nat_target::wait): Update. (gnu_nat_target::wait): Update. (gnu_nat_target::resume): Update. * fbsd-nat.c (fbsd_nat_target::pid_to_str): Change return type. (fbsd_nat_target::wait): Update. * darwin-nat.c (darwin_nat_target::pid_to_str): Change return type. (darwin_nat_target::attach): Update. * corelow.c (class core_target) <pid_to_str>: Change return type. (core_target::pid_to_str): Change return type. * target.c (normal_pid_to_str): Change return type. (default_pid_to_str): Likewise. (target_pid_to_str): Change return type. (target_translate_tls_address): Update. (target_announce_detach): Update. * bsd-uthread.c (struct bsd_uthread_target) <pid_to_str>: Change return type. (bsd_uthread_target::pid_to_str): Change return type. * bsd-kvm.c (class bsd_kvm_target) <pid_to_str>: Change return type. (bsd_kvm_target::pid_to_str): Change return type. * aix-thread.c (class aix_thread_target) <pid_to_str>: Change return type. (aix_thread_target::pid_to_str): Change return type. * target.h (struct target_ops) <pid_to_str>: Change return type. (target_pid_to_str, normal_pid_to_str): Likewise. * obsd-nat.h (class obsd_nat_target) <pid_to_str>: Change return type. * linux-nat.h (class linux_nat_target) <pid_to_str>: Change return type. * inf-ptrace.h (struct inf_ptrace_target) <pid_to_str>: Change return type. * gnu-nat.h (struct gnu_nat_target) <pid_to_str>: Change return type. * fbsd-nat.h (class fbsd_nat_target) <pid_to_str>: Change return type. * darwin-nat.h (class darwin_nat_target) <pid_to_str>: Change return type.
2019-02-28 17:09:55 +01:00
target_pid_to_str (ptid_t (inf->pid)).c_str ());
}
/* If necessary, make the user confirm that we should quit. Return
non-zero if we should quit, zero if we shouldn't. */
int
quit_confirm (void)
{
/* Don't even ask if we're only debugging a core file inferior. */
if (!have_live_inferiors ())
return 1;
/* Build the query string as a single string. */
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 12:11:47 +01:00
string_file stb;
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 12:11:47 +01:00
stb.puts (_("A debugging session is active.\n\n"));
for (inferior *inf : all_inferiors ())
print_inferior_quit_action (inf, &stb);
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 12:11:47 +01:00
stb.puts (_("\nQuit anyway? "));
Eliminate make_cleanup_ui_file_delete / make ui_file a class hierarchy This patch starts from the desire to eliminate make_cleanup_ui_file_delete, but then goes beyond. It makes ui_file & friends a real C++ class hierarchy, and switches temporary ui_file-like objects to stack-based allocation. - mem_fileopen -> string_file mem_fileopen is replaced with a new string_file class that is treated as a value class created on the stack. This alone eliminates most make_cleanup_ui_file_delete calls, and, simplifies code a whole lot (diffstat shows around 1k loc dropped.) string_file's internal buffer is a std::string, thus the "string" in the name. This simplifies the implementation much, compared to mem_fileopen, which managed growing its internal buffer manually. - ui_file_as_string, ui_file_strdup, ui_file_obsavestring all gone The new string_file class has a string() method that provides direct writable access to the internal std::string buffer. This replaced ui_file_as_string, which forced a copy of the same data the stream had inside. With direct access via a writable reference, we can instead move the string out of the string_stream, avoiding deep string copying. Related, ui_file_xstrdup calls are replaced with xstrdup'ping the stream's string, and ui_file_obsavestring is replaced by obstack_copy0. With all those out of the way, getting rid of the weird ui_file_put mechanism was possible. - New ui_file::printf, ui_file::puts, etc. methods These simplify / clarify client code. I considered splitting client-code changes, like these, e.g.: - stb = mem_fileopen (); - fprintf_unfiltered (stb, "%s%s%s", - _("The valid values are:\n"), - regdesc, - _("The default is \"std\".")); + string_file stb; + stb.printf ("%s%s%s", + _("The valid values are:\n"), + regdesc, + _("The default is \"std\".")); In two steps, with the first step leaving fprintf_unfiltered (etc.) calls in place, and only afterwards do a pass to change all those to call stb.printf etc.. I didn't do that split, because (when I tried), it turned out to be pointless make-work: the first pass would have to touch the fprintf_unfiltered line anyway, to replace "stb" with "&stb". - gdb_fopen replaced with stack-based objects This avoids the need for cleanups or unique_ptr's. I.e., this: struct ui_file *file = gdb_fopen (filename, "w"); if (filename == NULL) perror_with_name (filename); cleanups = make_cleanup_ui_file_delete (file); // use file. do_cleanups (cleanups); is replaced with this: stdio_file file; if (!file.open (filename, "w")) perror_with_name (filename); // use file. - odd contorsions in null_file_write / null_file_fputs around when to call to_fputs / to_write eliminated. - Global null_stream object A few places that were allocating a ui_file in order to print to "nowhere" are adjusted to instead refer to a new 'null_stream' global stream. - TUI's tui_sfileopen eliminated. TUI's ui_file much simplified The TUI's ui_file was serving a dual purpose. It supported being used as string buffer, and supported being backed by a stdio FILE. The string buffer part is gone, replaced by using of string_file. The 'FILE *' support is now much simplified, by making the TUI's ui_file inherit from stdio_file. gdb/ChangeLog: 2017-02-02 Pedro Alves <palves@redhat.com> * ada-lang.c (type_as_string): Use string_file. * ada-valprint.c (ada_print_floating): Use string_file. * ada-varobj.c (ada_varobj_scalar_image) (ada_varobj_get_value_image): Use string_file. * aix-thread.c (aix_thread_extra_thread_info): Use string_file. * arm-tdep.c (_initialize_arm_tdep): Use string_printf. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, reattach_breakpoints) (print_breakpoint_location, print_one_detail_ranged_breakpoint) (print_it_watchpoint): Use string_file. (save_breakpoints): Use stdio_file. * c-exp.y (oper): Use string_file. * cli/cli-logging.c (set_logging_redirect): Use ui_file_up and tee_file. (pop_output_files): Use delete. (handle_redirections): Use stdio_file and tee_file. * cli/cli-setshow.c (do_show_command): Use string_file. * compile/compile-c-support.c (c_compute_program): Use string_file. * compile/compile-c-symbols.c (generate_vla_size): Take a 'string_file &' instead of a 'ui_file *'. (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. Use string_file. (generate_c_for_variable_locations): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-internal.h (generate_c_for_for_one_variable): Take a 'string_file &' instead of a 'ui_file *'. * compile/compile-loc2c.c (push, pushf, unary, binary) (print_label, pushf_register_address, pushf_register) (do_compile_dwarf_expr_to_c): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * compile/compile.c (compile_to_object): Use string_file. * compile/compile.h (compile_dwarf_expr_to_c) (compile_dwarf_bounds_to_c): Take a 'string_file &' instead of a 'ui_file *'. * cp-support.c (inspect_type): Use string_file and obstack_copy0. (replace_typedefs_qualified_name): Use string_file and obstack_copy0. * disasm.c (gdb_pretty_print_insn): Use string_file. (gdb_disassembly): Adjust reference the null_stream global. (do_ui_file_delete): Delete. (gdb_insn_length): Use null_stream. * dummy-frame.c (maintenance_print_dummy_frames): Use stdio_file. * dwarf2loc.c (dwarf2_compile_property_to_c) (locexpr_generate_c_location, loclist_generate_c_location): Take a 'string_file &' instead of a 'ui_file *'. * dwarf2loc.h (dwarf2_compile_property_to_c): Likewise. * dwarf2read.c (do_ui_file_peek_last): Delete. (dwarf2_compute_name): Use string_file. * event-top.c (gdb_setup_readline): Use stdio_file. * gdbarch.sh (verify_gdbarch): Use string_file. * gdbtypes.c (safe_parse_type): Use null_stream. * guile/scm-breakpoint.c (gdbscm_breakpoint_commands): Use string_file. * guile/scm-disasm.c (gdbscm_print_insn_from_port): Take a 'string_file *' instead of a 'ui_file *'. (gdbscm_arch_disassemble): Use string_file. * guile/scm-frame.c (frscm_print_frame_smob): Use string_file. * guile/scm-ports.c (class ioscm_file_port): Now a class that inherits from ui_file. (ioscm_file_port_delete, ioscm_file_port_rewind) (ioscm_file_port_put): Delete. (ioscm_file_port_write): Rename to ... (ioscm_file_port::write): ... this. Remove file_port_magic checks. (ioscm_file_port_new): Delete. (ioscm_with_output_to_port_worker): Use ioscm_file_port and ui_file_up. * guile/scm-type.c (tyscm_type_name): Use string_file. * guile/scm-value.c (vlscm_print_value_smob, gdbscm_value_print): Use string_file. * infcmd.c (print_return_value_1): Use string_file. * infrun.c (print_target_wait_results): Use string_file. * language.c (add_language): Use string_file. * location.c (explicit_to_string_internal): Use string_file. * main.c (captured_main_1): Use null_file. * maint.c (maintenance_print_architecture): Use stdio_file. * mi/mi-cmd-stack.c (list_arg_or_local): Use string_file. * mi/mi-common.h (struct mi_interp) <out, err, log, targ, event_channel>: Change type to mi_console_file pointer. * mi/mi-console.c (mi_console_file_fputs, mi_console_file_flush) (mi_console_file_delete): Delete. (struct mi_console_file): Delete. (mi_console_file_magic): Delete. (mi_console_file_new): Delete. (mi_console_file::mi_console_file): New. (mi_console_file_delete): Delete. (mi_console_file_fputs): Delete. (mi_console_file::write): New. (mi_console_raw_packet): Delete. (mi_console_file::flush): New. (mi_console_file_flush): Delete. (mi_console_set_raw): Rename to ... (mi_console_file::set_raw): ... this. * mi/mi-console.h (class mi_console_file): New class. (mi_console_file_new, mi_console_set_raw): Delete. * mi/mi-interp.c (mi_interpreter_init): Use mi_console_file. (mi_set_logging): Use delete and tee_file. Adjust. * mi/mi-main.c (output_register): Use string_file. (mi_cmd_data_evaluate_expression): Use string_file. (mi_cmd_data_read_memory): Use string_file. (mi_cmd_execute, print_variable_or_computed): Use string_file. * mi/mi-out.c (mi_ui_out::main_stream): New. (mi_ui_out::rewind): Use main_stream and string_file. (mi_ui_out::put): Use main_stream and string_file. (mi_ui_out::mi_ui_out): Remove 'stream' parameter. Allocate a 'string_file' instead. (mi_out_new): Don't allocate a mem_fileopen stream here. * mi/mi-out.h (mi_ui_out::mi_ui_out): Remove 'stream' parameter. (mi_ui_out::main_stream): Declare method. * printcmd.c (eval_command): Use string_file. * psymtab.c (maintenance_print_psymbols): Use stdio_file. * python/py-arch.c (archpy_disassemble): Use string_file. * python/py-breakpoint.c (bppy_get_commands): Use string_file. * python/py-frame.c (frapy_str): Use string_file. * python/py-framefilter.c (py_print_type, py_print_single_arg): Use string_file. * python/py-type.c (typy_str): Use string_file. * python/py-unwind.c (unwind_infopy_str): Use string_file. * python/py-value.c (valpy_str): Use string_file. * record-btrace.c (btrace_insn_history): Use string_file. * regcache.c (regcache_print): Use stdio_file. * reggroups.c (maintenance_print_reggroups): Use stdio_file. * remote.c (escape_buffer): Use string_file. * rust-lang.c (rust_get_disr_info): Use string_file. * serial.c (serial_open_ops_1): Use stdio_file. (do_serial_close): Use delete. * stack.c (print_frame_arg): Use string_file. (print_frame_args): Remove local mem_fileopen stream, not used. (print_frame): Use string_file. * symmisc.c (maintenance_print_symbols): Use stdio_file. * symtab.h (struct symbol_computed_ops) <generate_c_location>: Take a 'string_file *' instead of a 'ui_file *'. * top.c (new_ui): Use stdio_file and stderr_file. (free_ui): Use delete. (execute_command_to_string): Use string_file. (quit_confirm): Use string_file. * tracepoint.c (collection_list::append_exp): Use string_file. * tui/tui-disasm.c (tui_disassemble): Use string_file. * tui/tui-file.c: Don't include "ui-file.h". (enum streamtype, struct tui_stream): Delete. (tui_file_new, tui_file_delete, tui_fileopen, tui_sfileopen) (tui_file_isatty, tui_file_rewind, tui_file_put): Delete. (tui_file::tui_file): New method. (tui_file_fputs): Delete. (tui_file_get_strbuf): Delete. (tui_file::puts): New method. (tui_file_adjust_strbuf): Delete. (tui_file_flush): Delete. (tui_file::flush): New method. * tui/tui-file.h: Tweak intro comment. Include ui-file.h. (tui_fileopen, tui_sfileopen, tui_file_get_strbuf) (tui_file_adjust_strbuf): Delete declarations. (class tui_file): New class. * tui/tui-io.c (tui_initialize_io): Use tui_file. * tui/tui-regs.c (tui_restore_gdbout): Use delete. (tui_register_format): Use string_stream. * tui/tui-stack.c (tui_make_status_line): Use string_file. (tui_get_function_from_frame): Use string_file. * typeprint.c (type_to_string): Use string_file. * ui-file.c (struct ui_file, ui_file_magic, ui_file_new): Delete. (null_stream): New global. (ui_file_delete): Delete. (ui_file::ui_file): New. (null_file_isatty): Delete. (ui_file::~ui_file): New. (null_file_rewind): Delete. (ui_file::printf): New. (null_file_put): Delete. (null_file_flush): Delete. (ui_file::putstr): New. (null_file_write): Delete. (ui_file::putstrn): New. (null_file_read): Delete. (ui_file::putc): New. (null_file_fputs): Delete. (null_file_write_async_safe): Delete. (ui_file::vprintf): New. (null_file_delete): Delete. (null_file::write): New. (null_file_fseek): Delete. (null_file::puts): New. (ui_file_data): Delete. (null_file::write_async_safe): New. (gdb_flush, ui_file_isatty): Adjust. (ui_file_put, ui_file_rewind): Delete. (ui_file_write): Adjust. (ui_file_write_for_put): Delete. (ui_file_write_async_safe, ui_file_read): Adjust. (ui_file_fseek): Delete. (fputs_unfiltered): Adjust. (set_ui_file_flush, set_ui_file_isatty, set_ui_file_rewind) (set_ui_file_put, set_ui_file_write, set_ui_file_write_async_safe) (set_ui_file_read, set_ui_file_fputs, set_ui_file_fseek) (set_ui_file_data): Delete. (string_file::~string_file, string_file::write) (struct accumulated_ui_file, do_ui_file_xstrdup, ui_file_xstrdup) (do_ui_file_as_string, ui_file_as_string): Delete. (do_ui_file_obsavestring, ui_file_obsavestring): Delete. (struct mem_file): Delete. (mem_file_new): Delete. (stdio_file::stdio_file): New. (mem_file_delete): Delete. (stdio_file::stdio_file): New. (mem_fileopen): Delete. (stdio_file::~stdio_file): New. (mem_file_rewind): Delete. (stdio_file::set_stream): New. (mem_file_put): Delete. (stdio_file::open): New. (mem_file_write): Delete. (stdio_file_magic, struct stdio_file): Delete. (stdio_file_new, stdio_file_delete, stdio_file_flush): Delete. (stdio_file::flush): New. (stdio_file_read): Rename to ... (stdio_file::read): ... this. Adjust. (stdio_file_write): Rename to ... (stdio_file::write): ... this. Adjust. (stdio_file_write_async_safe): Rename to ... (stdio_file::write_async_safe) ... this. Adjust. (stdio_file_fputs): Rename to ... (stdio_file::puts) ... this. Adjust. (stdio_file_isatty): Delete. (stdio_file_fseek): Delete. (stdio_file::isatty): New. (stderr_file_write): Rename to ... (stderr_file::write) ... this. Adjust. (stderr_file_fputs): Rename to ... (stderr_file::puts) ... this. Adjust. (stderr_fileopen, stdio_fileopen, gdb_fopen): Delete. (stderr_file::stderr_file): New. (tee_file_magic): Delete. (struct tee_file): Delete. (tee_file::tee_file): New. (tee_file_new): Delete. (tee_file::~tee_file): New. (tee_file_delete): Delete. (tee_file_flush): Rename to ... (tee_file::flush): ... this. Adjust. (tee_file_write): Rename to ... (tee_file::write): ... this. Adjust. (tee_file::write_async_safe): New. (tee_file_fputs): Rename to ... (tee_file::puts): ... this. Adjust. (tee_file_isatty): Rename to ... (tee_file::isatty): ... this. Adjust. * ui-file.h (struct obstack, struct ui_file): Don't forward-declare. (ui_file_new, ui_file_flush_ftype, set_ui_file_flush) (ui_file_write_ftype) (set_ui_file_write, ui_file_fputs_ftype, set_ui_file_fputs) (ui_file_write_async_safe_ftype, set_ui_file_write_async_safe) (ui_file_read_ftype, set_ui_file_read, ui_file_isatty_ftype) (set_ui_file_isatty, ui_file_rewind_ftype, set_ui_file_rewind) (ui_file_put_method_ftype, ui_file_put_ftype, set_ui_file_put) (ui_file_delete_ftype, set_ui_file_data, ui_file_fseek_ftype) (set_ui_file_fseek): Delete. (ui_file_data, ui_file_delete, ui_file_rewind) (struct ui_file): New. (ui_file_up): New. (class null_file): New. (null_stream): Declare. (ui_file_write_for_put, ui_file_put): Delete. (ui_file_xstrdup, ui_file_as_string, ui_file_obsavestring): Delete. (ui_file_fseek, mem_fileopen, stdio_fileopen, stderr_fileopen) (gdb_fopen, tee_file_new): Delete. (struct string_file): New. (struct stdio_file): New. (stdio_file_up): New. (struct stderr_file): New. (class tee_file): New. * ui-out.c (ui_out::field_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * ui-out.h (class ui_out) <field_stream>: Likewise. * utils.c (do_ui_file_delete, make_cleanup_ui_file_delete) (null_stream): Delete. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. Adjust. * utils.h (struct ui_file): Delete forward declaration.. (make_cleanup_ui_file_delete, null_stream): Delete declarations. (error_stream): Take a 'string_file &' instead of a 'ui_file *'. * varobj.c (varobj_value_get_print_value): Use string_file. * xtensa-tdep.c (xtensa_verify_config): Use string_file. * gdbarch.c: Regenerate.
2017-02-02 12:11:47 +01:00
return query ("%s", stb.c_str ());
}
/* Prepare to exit GDB cleanly by undoing any changes made to the
terminal so that we leave the terminal in the state we acquired it. */
static void
undo_terminal_modifications_before_exit (void)
{
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
struct ui *saved_top_level = current_ui;
Remove make_cleanup_restore_target_terminal This removes make_cleanup_restore_target_terminal and generally C++-ifies target terminal handling. It changes all target_terminal_* functions to be static members of a new target_terminal class and changes the cleanup to be a scoped_* class. make_cleanup_override_quit_handler is also removed in favor of simply using scoped_restore. Note that there are some files in this patch that I could not compile. Considering that some of the rewrites were automated, and that none of these files involed cleanups, I feel that this is relatively safe. Regression tested by the buildbot. gdb/ChangeLog 2017-09-20 Tom Tromey <tom@tromey.com> * windows-nat.c (get_windows_debug_event, windows_wait) (do_initial_windows_stuff, windows_attach): Update. * utils.c (vwarning, internal_vproblem): Update. (ui_unregister_input_event_handler_cleanup) (prepare_to_handle_input): Remove. (class scoped_input_handler): New. (defaulted_query, prompt_for_continue): Update. * tui/tui-hooks.c (tui_refresh_frame_and_register_information): Update. * top.c (undo_terminal_modifications_before_exit): Update. * target/target.h (target_terminal_init, target_terminal_inferior) (target_terminal_ours): Don't declare. (class target_terminal): New. * target.h (target_terminal_is_inferior, target_terminal_is_ours) (target_terminal_ours_for_output) (make_cleanup_restore_target_terminal): Don't declare. (target_terminal_info): Remove. * target.c (enum terminal_state, terminal_state): Remove. (target_terminal::terminal_state): Define. (target_terminal::init): Rename from target_terminal_init. (target_terminal::inferior): Rename from target_terminal_inferior. (target_terminal::ours): Rename from target_terminal_ours. (target_terminal::ours_for_output): Rename from target_terminal_ours_for_output. (target_terminal::info): New method. (cleanup_restore_target_terminal) (make_cleanup_restore_target_terminal): Remove. * solib.c (handle_solib_event): Update. * remote.c (remote_serial_quit_handler): Update. (remote_terminal_inferior, remote_wait_as): Update. * record-full.c (record_full_wait_1): Update. * nto-procfs.c (procfs_create_inferior): Update. * nat/fork-inferior.c (startup_inferior): Update. * mi/mi-interp.c (mi_new_thread, mi_thread_exit) (mi_record_changed, mi_inferior_added, mi_inferior_appeared) (mi_inferior_exit, mi_inferior_removed, mi_traceframe_changed) (mi_tsv_created, mi_tsv_deleted, mi_tsv_modified) (mi_breakpoint_created, mi_breakpoint_deleted) (mi_breakpoint_modified, mi_on_resume, mi_solib_loaded) (mi_solib_unloaded, mi_command_param_changed, mi_memory_changed) (mi_user_selected_context_changed, report_initial_inferior): Update. * linux-nat.c (linux_nat_attach, linux_nat_terminal_ours) (linux_nat_terminal_inferior): Update. * infrun.c (follow_fork_inferior) (handle_vfork_child_exec_or_exit, do_target_resume) (check_curr_ui_sync_execution_done, handle_inferior_event_1) (handle_signal_stop, maybe_remove_breakpoints, normal_stop): Update. * inflow.c (child_terminal_init, info_terminal_command): Update. * infcmd.c (post_create_inferior, continue_1, prepare_one_step) (attach_command): Update. * infcall.c (call_thread_fsm_should_stop): Update. * gnu-nat.c (gnu_attach): Update. * extension.c (struct active_ext_lang_state) (restore_active_ext_lang): Update. * exceptions.c (print_flush): Update. * event-top.c (async_enable_stdin, default_quit_handler): Update. (struct quit_handler_cleanup_data, restore_quit_handler) (restore_quit_handler_dtor, make_cleanup_override_quit_handler): Remove. * cp-support.c (gdb_demangle): Update. * breakpoint.c (update_inserted_breakpoint_locations) (insert_breakpoint_locations, handle_jit_event) (disable_breakpoints_in_unloaded_shlib): Update. * annotate.c (annotate_breakpoints_invalid) (annotate_frames_invalid): Update. gdb/gdbserver/ChangeLog 2017-09-20 Tom Tromey <tom@tromey.com> * target.c (target_terminal::terminal_state): Define. (target_terminal::init): Rename from target_terminal_init. (target_terminal::inferior): Rename from target_terminal_inferior. (target_terminal::ours): Rename from target_terminal_ours. (target_terminal::ours_for_output, target_terminal::info): New.
2017-09-20 05:56:36 +02:00
target_terminal::ours ();
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
current_ui = main_ui;
#if defined(TUI)
tui_disable ();
#endif
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
gdb_disable_readline ();
current_ui = saved_top_level;
}
/* Quit without asking for confirmation. */
void
quit_force (int *exit_arg, int from_tty)
{
int exit_code = 0;
undo_terminal_modifications_before_exit ();
/* An optional expression may be used to cause gdb to terminate with the
value of that expression. */
if (exit_arg)
exit_code = *exit_arg;
else if (return_child_result)
exit_code = return_child_result_value;
/* We want to handle any quit errors and exit regardless. */
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
/* Get out of tfind mode, and kill or detach all inferiors. */
Rewrite TRY/CATCH This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.
2019-04-04 00:02:42 +02:00
try
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
{
disconnect_tracing ();
for (inferior *inf : all_inferiors ())
kill_or_detach (inf, from_tty);
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
}
Rename gdb exception types This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.
2019-04-03 23:59:07 +02:00
catch (const gdb_exception &ex)
Split TRY_CATCH into TRY + CATCH This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.
2015-03-07 16:14:14 +01:00
{
exception_print (gdb_stderr, ex);
}
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
/* Give all pushed targets a chance to do minimal cleanup, and pop
them all out. */
Multi-target support This commit adds multi-target support to GDB. What this means is that with this commit, GDB can now be connected to different targets at the same time. E.g., you can debug a live native process and a core dump at the same time, connect to multiple gdbservers, etc. Actually, the word "target" is overloaded in gdb. We already have a target stack, with pushes several target_ops instances on top of one another. We also have "info target" already, which means something completely different to what this patch does. So from here on, I'll be using the "target connections" term, to mean an open process_stratum target, pushed on a target stack. This patch makes gdb have multiple target stacks, and multiple process_stratum targets open simultaneously. The user-visible changes / commands will also use this terminology, but of course it's all open to debate. User-interface-wise, not that much changes. The main difference is that each inferior may have its own target connection. A target connection (e.g., a target extended-remote connection) may support debugging multiple processes, just as before. Say you're debugging against gdbserver in extended-remote mode, and you do "add-inferior" to prepare to spawn a new process, like: (gdb) target extended-remote :9999 ... (gdb) start ... (gdb) add-inferior Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] (gdb) file a.out ... (gdb) start ... At this point, you have two inferiors connected to the same gdbserver. With this commit, GDB will maintain a target stack per inferior, instead of a global target stack. To preserve the behavior above, by default, "add-inferior" makes the new inferior inherit a copy of the target stack of the current inferior. Same across a fork - the child inherits a copy of the target stack of the parent. While the target stacks are copied, the targets themselves are not. Instead, target_ops is made a refcounted_object, which means that target_ops instances are refcounted, which each inferior counting for a reference. What if you want to create an inferior and connect it to some _other_ target? For that, this commit introduces a new "add-inferior -no-connection" option that makes the new inferior not share the current inferior's target. So you could do: (gdb) target extended-remote :9999 Remote debugging using :9999 ... (gdb) add-inferior -no-connection [New inferior 2] Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] (gdb) info inferiors Num Description Executable 1 process 18401 target:/home/pedro/tmp/main * 2 <null> (gdb) tar extended-remote :10000 Remote debugging using :10000 ... (gdb) info inferiors Num Description Executable 1 process 18401 target:/home/pedro/tmp/main * 2 process 18450 target:/home/pedro/tmp/main (gdb) A following patch will extended "info inferiors" to include a column indicating which connection an inferior is bound to, along with a couple other UI tweaks. Other than that, debugging is the same as before. Users interact with inferiors and threads as before. The only difference is that inferiors may be bound to processes running in different machines. That's pretty much all there is to it in terms of noticeable UI changes. On to implementation. Since we can be connected to different systems at the same time, a ptid_t is no longer a unique identifier. Instead a thread can be identified by a pair of ptid_t and 'process_stratum_target *', the later being the instance of the process_stratum target that owns the process/thread. Note that process_stratum_target inherits from target_ops, and all process_stratum targets inherit from process_stratum_target. In earlier patches, many places in gdb were converted to refer to threads by thread_info pointer instead of ptid_t, but there are still places in gdb where we start with a pid/tid and need to find the corresponding inferior or thread_info objects. So you'll see in the patch many places adding a process_stratum_target parameter to functions that used to take only a ptid_t. Since each inferior has its own target stack now, we can always find the process_stratum target for an inferior. That is done via a inf->process_target() convenience method. Since each inferior has its own target stack, we need to handle the "beneath" calls when servicing target calls. The solution I settled with is just to make sure to switch the current inferior to the inferior you want before making a target call. Not relying on global context is just not feasible in current GDB. Fortunately, there aren't that many places that need to do that, because generally most code that calls target methods already has the current context pointing to the right inferior/thread. Note, to emphasize -- there's no method to "switch to this target stack". Instead, you switch the current inferior, and that implicitly switches the target stack. In some spots, we need to iterate over all inferiors so that we reach all target stacks. Native targets are still singletons. There's always only a single instance of such targets. Remote targets however, we'll have one instance per remote connection. The exec target is still a singleton. There's only one instance. I did not see the point of instanciating more than one exec_target object. After vfork, we need to make sure to push the exec target on the new inferior. See exec_on_vfork. For type safety, functions that need a {target, ptid} pair to identify a thread, take a process_stratum_target pointer for target parameter instead of target_ops *. Some shared code in gdb/nat/ also need to gain a target pointer parameter. This poses an issue, since gdbserver doesn't have process_stratum_target, only target_ops. To fix this, this commit renames gdbserver's target_ops to process_stratum_target. I think this makes sense. There's no concept of target stack in gdbserver, and gdbserver's target_ops really implements a process_stratum-like target. The thread and inferior iterator functions also gain process_stratum_target parameters. These are used to be able to iterate over threads and inferiors of a given target. Following usual conventions, if the target pointer is null, then we iterate over threads and inferiors of all targets. I tried converting "add-inferior" to the gdb::option framework, as a preparatory patch, but that stumbled on the fact that gdb::option does not support file options yet, for "add-inferior -exec". I have a WIP patchset that adds that, but it's not a trivial patch, mainly due to need to integrate readline's filename completion, so I deferred that to some other time. In infrun.c/infcmd.c, the main change is that we need to poll events out of all targets. See do_target_wait. Right after collecting an event, we switch the current inferior to an inferior bound to the target that reported the event, so that target methods can be used while handling the event. This makes most of the code transparent to multi-targets. See fetch_inferior_event. infrun.c:stop_all_threads is interesting -- in this function we need to stop all threads of all targets. What the function does is send an asynchronous stop request to all threads, and then synchronously waits for events, with target_wait, rinse repeat, until all it finds are stopped threads. Now that we have multiple targets, it's not efficient to synchronously block in target_wait waiting for events out of one target. Instead, we implement a mini event loop, with interruptible_select, select'ing on one file descriptor per target. For this to work, we need to be able to ask the target for a waitable file descriptor. Such file descriptors already exist, they are the descriptors registered in the main event loop with add_file_handler, inside the target_async implementations. This commit adds a new target_async_wait_fd target method that just returns the file descriptor in question. See wait_one / stop_all_threads in infrun.c. The 'threads_executing' global is made a per-target variable. Since it is only relevant to process_stratum_target targets, this is where it is put, instead of in target_ops. You'll notice that remote.c includes some FIXME notes. These refer to the fact that the global arrays that hold data for the remote packets supported are still globals. For example, if we connect to two different servers/stubs, then each might support different remote protocol features. They might even be different architectures, like e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a host/controller scenario as a single program. That isn't going to work correctly today, because of said globals. I'm leaving fixing that for another pass, since it does not appear to be trivial, and I'd rather land the base work first. It's already useful to be able to debug multiple instances of the same server (e.g., a distributed cluster, where you have full control over the servers installed), so I think as is it's already reasonable incremental progress. Current limitations: - You can only resume more that one target at the same time if all targets support asynchronous debugging, and support non-stop mode. It should be possible to support mixed all-stop + non-stop backends, but that is left for another time. This means that currently in order to do multi-target with gdbserver you need to issue "maint set target-non-stop on". I would like to make that mode be the default, but we're not there yet. Note that I'm talking about how the target backend works, only. User-visible all-stop mode works just fine. - As explained above, connecting to different remote servers at the same time is likely to produce bad results if they don't support the exact set of RSP features. FreeBSD updates courtesy of John Baldwin. gdb/ChangeLog: 2020-01-10 Pedro Alves <palves@redhat.com> John Baldwin <jhb@FreeBSD.org> * aarch64-linux-nat.c (aarch64_linux_nat_target::thread_architecture): Adjust. * ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call. (task_command_1): Likewise. * aix-thread.c (sync_threadlists, aix_thread_target::resume) (aix_thread_target::wait, aix_thread_target::fetch_registers) (aix_thread_target::store_registers) (aix_thread_target::thread_alive): Adjust. * amd64-fbsd-tdep.c: Include "inferior.h". (amd64fbsd_get_thread_local_address): Pass down target. * amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle thread's gdbarch instead of target_gdbarch. * break-catch-sig.c (signal_catchpoint_print_it): Adjust call to get_last_target_status. * break-catch-syscall.c (print_it_catch_syscall): Likewise. * breakpoint.c (breakpoints_should_be_inserted_now): Consider all inferiors. (update_inserted_breakpoint_locations): Skip if inferiors with no execution. (update_global_location_list): When handling moribund locations, find representative inferior for location's pspace, and use thread count of its process_stratum target. * bsd-kvm.c (bsd_kvm_target_open): Pass target down. * bsd-uthread.c (bsd_uthread_target::wait): Use as_process_stratum_target and adjust thread_change_ptid and add_thread calls. (bsd_uthread_target::update_thread_list): Use as_process_stratum_target and adjust find_thread_ptid, thread_change_ptid and add_thread calls. * btrace.c (maint_btrace_packet_history_cmd): Adjust find_thread_ptid call. * corelow.c (add_to_thread_list): Adjust add_thread call. (core_target_open): Adjust add_thread_silent and thread_count calls. (core_target::pid_to_str): Adjust find_inferior_ptid call. * ctf.c (ctf_target_open): Adjust add_thread_silent call. * event-top.c (async_disconnect): Pop targets from all inferiors. * exec.c (add_target_sections): Push exec target on all inferiors sharing the program space. (remove_target_sections): Remove the exec target from all inferiors sharing the program space. (exec_on_vfork): New. * exec.h (exec_on_vfork): Declare. * fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter. Pass it down. (fbsd_nat_target::update_thread_list): Adjust. (fbsd_nat_target::resume): Adjust. (fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it down. (fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust. * fbsd-tdep.c (fbsd_corefile_thread): Adjust get_thread_arch_regcache call. * fork-child.c (gdb_startup_inferior): Pass target down to startup_inferior and set_executing. * gdbthread.h (struct process_stratum_target): Forward declare. (add_thread, add_thread_silent, add_thread_with_info) (in_thread_list): Add process_stratum_target parameter. (find_thread_ptid(inferior*, ptid_t)): New overload. (find_thread_ptid, thread_change_ptid): Add process_stratum_target parameter. (all_threads()): Delete overload. (all_threads, all_non_exited_threads): Add process_stratum_target parameter. (all_threads_safe): Use brace initialization. (thread_count): Add process_stratum_target parameter. (set_resumed, set_running, set_stop_requested, set_executing) (threads_are_executing, finish_thread_state): Add process_stratum_target parameter. (switch_to_thread): Use is_current_thread. * i386-fbsd-tdep.c: Include "inferior.h". (i386fbsd_get_thread_local_address): Pass down target. * i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust. * inf-child.c (inf_child_target::maybe_unpush_target): Remove have_inferiors check. * inf-ptrace.c (inf_ptrace_target::create_inferior) (inf_ptrace_target::attach): Adjust. * infcall.c (run_inferior_call): Adjust. * infcmd.c (run_command_1): Pass target to scoped_finish_thread_state. (proceed_thread_callback): Skip inferiors with no execution. (continue_command): Rename 'all_threads' local to avoid hiding 'all_threads' function. Adjust get_last_target_status call. (prepare_one_step): Adjust set_running call. (signal_command): Use user_visible_resume_target. Compare thread pointers instead of inferior_ptid. (info_program_command): Adjust to pass down target. (attach_command): Mark target's 'thread_executing' flag. (stop_current_target_threads_ns): New, factored out from ... (interrupt_target_1): ... this. Switch inferior before making target calls. * inferior-iter.h (struct all_inferiors_iterator, struct all_inferiors_range) (struct all_inferiors_safe_range) (struct all_non_exited_inferiors_range): Filter on process_stratum_target too. Remove explicit. * inferior.c (inferior::inferior): Push dummy target on target stack. (find_inferior_pid, find_inferior_ptid, number_of_live_inferiors): Add process_stratum_target parameter, and pass it down. (have_live_inferiors): Adjust. (switch_to_inferior_and_push_target): New. (add_inferior_command, clone_inferior_command): Handle "-no-connection" parameter. Use switch_to_inferior_and_push_target. (_initialize_inferior): Mention "-no-connection" option in the help of "add-inferior" and "clone-inferior" commands. * inferior.h: Include "process-stratum-target.h". (interrupt_target_1): Use bool. (struct inferior) <push_target, unpush_target, target_is_pushed, find_target_beneath, top_target, process_target, target_at, m_stack>: New. (discard_all_inferiors): Delete. (find_inferior_pid, find_inferior_ptid, number_of_live_inferiors) (all_inferiors, all_non_exited_inferiors): Add process_stratum_target parameter. * infrun.c: Include "gdb_select.h" and <unordered_map>. (target_last_proc_target): New global. (follow_fork_inferior): Push target on new inferior. Pass target to add_thread_silent. Call exec_on_vfork. Handle target's reference count. (follow_fork): Adjust get_last_target_status call. Also consider target. (follow_exec): Push target on new inferior. (struct execution_control_state) <target>: New field. (user_visible_resume_target): New. (do_target_resume): Call target_async. (resume_1): Set target's threads_executing flag. Consider resume target. (commit_resume_all_targets): New. (proceed): Also consider resume target. Skip threads of inferiors with no execution. Commit resumtion in all targets. (start_remote): Pass current inferior to wait_for_inferior. (infrun_thread_stop_requested): Consider target as well. Pass thread_info pointer to clear_inline_frame_state instead of ptid. (infrun_thread_thread_exit): Consider target as well. (random_pending_event_thread): New inferior parameter. Use it. (do_target_wait): Rename to ... (do_target_wait_1): ... this. Add inferior parameter, and pass it down. (threads_are_resumed_pending_p, do_target_wait): New. (prepare_for_detach): Adjust calls. (wait_for_inferior): New inferior parameter. Handle it. Use do_target_wait_1 instead of do_target_wait. (fetch_inferior_event): Adjust. Switch to representative inferior. Pass target down. (set_last_target_status): Add process_stratum_target parameter. Save target in global. (get_last_target_status): Add process_stratum_target parameter and handle it. (nullify_last_target_wait_ptid): Clear 'target_last_proc_target'. (context_switch): Check inferior_ptid == null_ptid before calling inferior_thread(). (get_inferior_stop_soon): Pass down target. (wait_one): Rename to ... (poll_one_curr_target): ... this. (struct wait_one_event): New. (wait_one): New. (stop_all_threads): Adjust. (handle_no_resumed, handle_inferior_event): Adjust to consider the event's target. (switch_back_to_stepped_thread): Also consider target. (print_stop_event): Update. (normal_stop): Update. Also consider the resume target. * infrun.h (wait_for_inferior): Remove declaration. (user_visible_resume_target): New declaration. (get_last_target_status, set_last_target_status): New process_stratum_target parameter. * inline-frame.c (clear_inline_frame_state(ptid_t)): Add process_stratum_target parameter, and use it. (clear_inline_frame_state (thread_info*)): New. * inline-frame.c (clear_inline_frame_state(ptid_t)): Add process_stratum_target parameter. (clear_inline_frame_state (thread_info*)): Declare. * linux-fork.c (delete_checkpoint_command): Pass target down to find_thread_ptid. (checkpoint_command): Adjust. * linux-nat.c (linux_nat_target::follow_fork): Switch to thread instead of just tweaking inferior_ptid. (linux_nat_switch_fork): Pass target down to thread_change_ptid. (exit_lwp): Pass target down to find_thread_ptid. (attach_proc_task_lwp_callback): Pass target down to add_thread/set_running/set_executing. (linux_nat_target::attach): Pass target down to thread_change_ptid. (get_detach_signal): Pass target down to find_thread_ptid. Consider last target status's target. (linux_resume_one_lwp_throw, resume_lwp) (linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp) (stop_wait_callback, save_stop_reason, linux_nat_filter_event) (linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down. (linux_nat_target::async_wait_fd): New. (linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass target down. * linux-nat.h (linux_nat_target::async_wait_fd): Declare. * linux-tdep.c (get_thread_arch_regcache): Pass target down. * linux-thread-db.c (struct thread_db_info::process_target): New field. (add_thread_db_info): Save target. (get_thread_db_info): New process_stratum_target parameter. Also match target. (delete_thread_db_info): New process_stratum_target parameter. Also match target. (thread_from_lwp): Adjust to pass down target. (thread_db_notice_clone): Pass down target. (check_thread_db_callback): Pass down target. (try_thread_db_load_1): Always push the thread_db target. (try_thread_db_load, record_thread): Pass target down. (thread_db_target::detach): Pass target down. Always unpush the thread_db target. (thread_db_target::wait, thread_db_target::mourn_inferior): Pass target down. Always unpush the thread_db target. (find_new_threads_callback, thread_db_find_new_threads_2) (thread_db_target::update_thread_list): Pass target down. (thread_db_target::pid_to_str): Pass current inferior down. (thread_db_target::get_thread_local_address): Pass target down. (thread_db_target::resume, maintenance_check_libthread_db): Pass target down. * nto-procfs.c (nto_procfs_target::update_thread_list): Adjust. * procfs.c (procfs_target::procfs_init_inferior): Declare. (proc_set_current_signal, do_attach, procfs_target::wait): Adjust. (procfs_init_inferior): Rename to ... (procfs_target::procfs_init_inferior): ... this and adjust. (procfs_target::create_inferior, procfs_notice_thread) (procfs_do_thread_registers): Adjust. * ppc-fbsd-tdep.c: Include "inferior.h". (ppcfbsd_get_thread_local_address): Pass down target. * proc-service.c (ps_xfer_memory): Switch current inferior and program space as well. (get_ps_regcache): Pass target down. * process-stratum-target.c (process_stratum_target::thread_address_space) (process_stratum_target::thread_architecture): Pass target down. * process-stratum-target.h (process_stratum_target::threads_executing): New field. (as_process_stratum_target): New. * ravenscar-thread.c (ravenscar_thread_target::update_inferior_ptid): Pass target down. (ravenscar_thread_target::wait, ravenscar_add_thread): Pass target down. * record-btrace.c (record_btrace_target::info_record): Adjust. (record_btrace_target::record_method) (record_btrace_target::record_is_replaying) (record_btrace_target::fetch_registers) (get_thread_current_frame_id, record_btrace_target::resume) (record_btrace_target::wait, record_btrace_target::stop): Pass target down. * record-full.c (record_full_wait_1): Switch to event thread. Pass target down. * regcache.c (regcache::regcache) (get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add process_stratum_target parameter and handle it. (current_thread_target): New global. (get_thread_regcache): Add process_stratum_target parameter and handle it. Switch inferior before calling target method. (get_thread_regcache): Pass target down. (get_thread_regcache_for_ptid): Pass target down. (registers_changed_ptid): Add process_stratum_target parameter and handle it. (registers_changed_thread, registers_changed): Pass target down. (test_get_thread_arch_aspace_regcache): New. (current_regcache_test): Define a couple local test_target_ops instances and use them for testing. (readwrite_regcache): Pass process_stratum_target parameter. (cooked_read_test, cooked_write_test): Pass mock_target down. * regcache.h (get_thread_regcache, get_thread_arch_regcache) (get_thread_arch_aspace_regcache): Add process_stratum_target parameter. (regcache::target): New method. (regcache::regcache, regcache::get_thread_arch_aspace_regcache) (regcache::registers_changed_ptid): Add process_stratum_target parameter. (regcache::m_target): New field. (registers_changed_ptid): Add process_stratum_target parameter. * remote.c (remote_state::supports_vCont_probed): New field. (remote_target::async_wait_fd): New method. (remote_unpush_and_throw): Add remote_target parameter. (get_current_remote_target): Adjust. (remote_target::remote_add_inferior): Push target. (remote_target::remote_add_thread) (remote_target::remote_notice_new_inferior) (get_remote_thread_info): Pass target down. (remote_target::update_thread_list): Skip threads of inferiors bound to other targets. (remote_target::close): Don't discard inferiors. (remote_target::add_current_inferior_and_thread) (remote_target::process_initial_stop_replies) (remote_target::start_remote) (remote_target::remote_serial_quit_handler): Pass down target. (remote_target::remote_unpush_target): New remote_target parameter. Unpush the target from all inferiors. (remote_target::remote_unpush_and_throw): New remote_target parameter. Pass it down. (remote_target::open_1): Check whether the current inferior has execution instead of checking whether any inferior is live. Pass target down. (remote_target::remote_detach_1): Pass down target. Use remote_unpush_target. (extended_remote_target::attach): Pass down target. (remote_target::remote_vcont_probe): Set supports_vCont_probed. (remote_target::append_resumption): Pass down target. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc, remote_target::resume) (remote_target::commit_resume): Pass down target. (remote_target::remote_stop_ns): Check supports_vCont_probed. (remote_target::interrupt_query) (remote_target::remove_new_fork_children) (remote_target::check_pending_events_prevent_wildcard_vcont) (remote_target::remote_parse_stop_reply) (remote_target::process_stop_reply): Pass down target. (first_remote_resumed_thread): New remote_target parameter. Pass it down. (remote_target::wait_as): Pass down target. (unpush_and_perror): New remote_target parameter. Pass it down. (remote_target::readchar, remote_target::remote_serial_write) (remote_target::getpkt_or_notif_sane_1) (remote_target::kill_new_fork_children, remote_target::kill): Pass down target. (remote_target::mourn_inferior): Pass down target. Use remote_unpush_target. (remote_target::core_of_thread) (remote_target::remote_btrace_maybe_reopen): Pass down target. (remote_target::pid_to_exec_file) (remote_target::thread_handle_to_thread_info): Pass down target. (remote_target::async_wait_fd): New. * riscv-fbsd-tdep.c: Include "inferior.h". (riscv_fbsd_get_thread_local_address): Pass down target. * sol2-tdep.c (sol2_core_pid_to_str): Pass down target. * sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs) (ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback): Adjust. * solib-spu.c (spu_skip_standalone_loader): Pass down target. * solib-svr4.c (enable_break): Pass down target. * spu-multiarch.c (parse_spufs_run): Pass down target. * spu-tdep.c (spu2ppu_sniffer): Pass down target. * target-delegates.c: Regenerate. * target.c (g_target_stack): Delete. (current_top_target): Return the current inferior's top target. (target_has_execution_1): Refer to the passed-in inferior's top target. (target_supports_terminal_ours): Check whether the initial inferior was already created. (decref_target): New. (target_stack::push): Incref/decref the target. (push_target, push_target, unpush_target): Adjust. (target_stack::unpush): Defref target. (target_is_pushed): Return bool. Adjust to refer to the current inferior's target stack. (dispose_inferior): Delete, and inline parts ... (target_preopen): ... here. Only dispose of the current inferior. (target_detach): Hold strong target reference while detaching. Pass target down. (target_thread_name): Add assertion. (target_resume): Pass down target. (target_ops::beneath, find_target_at): Adjust to refer to the current inferior's target stack. (get_dummy_target): New. (target_pass_ctrlc): Pass the Ctrl-C to the first inferior that has a thread running. (initialize_targets): Rename to ... (_initialize_target): ... this. * target.h: Include "gdbsupport/refcounted-object.h". (struct target_ops): Inherit refcounted_object. (target_ops::shortname, target_ops::longname): Make const. (target_ops::async_wait_fd): New method. (decref_target): Declare. (struct target_ops_ref_policy): New. (target_ops_ref): New typedef. (get_dummy_target): Declare function. (target_is_pushed): Return bool. * thread-iter.c (all_matching_threads_iterator::m_inf_matches) (all_matching_threads_iterator::all_matching_threads_iterator): Handle filter target. * thread-iter.h (struct all_matching_threads_iterator, struct all_matching_threads_range, class all_non_exited_threads_range): Filter by target too. Remove explicit. * thread.c (threads_executing): Delete. (inferior_thread): Pass down current inferior. (clear_thread_inferior_resources): Pass down thread pointer instead of ptid_t. (add_thread_silent, add_thread_with_info, add_thread): Add process_stratum_target parameter. Use it for thread and inferior searches. (is_current_thread): New. (thread_info::deletable): Use it. (find_thread_ptid, thread_count, in_thread_list) (thread_change_ptid, set_resumed, set_running): New process_stratum_target parameter. Pass it down. (set_executing): New process_stratum_target parameter. Pass it down. Adjust reference to 'threads_executing'. (threads_are_executing): New process_stratum_target parameter. Adjust reference to 'threads_executing'. (set_stop_requested, finish_thread_state): New process_stratum_target parameter. Pass it down. (switch_to_thread): Also match inferior. (switch_to_thread): New process_stratum_target parameter. Pass it down. (update_threads_executing): Reimplement. * top.c (quit_force): Pop targets from all inferior. (gdb_init): Don't call initialize_targets. * windows-nat.c (windows_nat_target) <get_windows_debug_event>: Declare. (windows_add_thread, windows_delete_thread): Adjust. (get_windows_debug_event): Rename to ... (windows_nat_target::get_windows_debug_event): ... this. Adjust. * tracefile-tfile.c (tfile_target_open): Pass down target. * gdbsupport/common-gdbthread.h (struct process_stratum_target): Forward declare. (switch_to_thread): Add process_stratum_target parameter. * mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target parameter. Use it. (mi_on_resume): Pass target down. * nat/fork-inferior.c (startup_inferior): Add process_stratum_target parameter. Pass it down. * nat/fork-inferior.h (startup_inferior): Add process_stratum_target parameter. * python/py-threadevent.c (py_get_event_thread): Pass target down. gdb/gdbserver/ChangeLog: 2020-01-10 Pedro Alves <palves@redhat.com> * fork-child.c (post_fork_inferior): Pass target down to startup_inferior. * inferiors.c (switch_to_thread): Add process_stratum_target parameter. * lynx-low.c (lynx_target_ops): Now a process_stratum_target. * nto-low.c (nto_target_ops): Now a process_stratum_target. * linux-low.c (linux_target_ops): Now a process_stratum_target. * remote-utils.c (prepare_resume_reply): Pass the target to switch_to_thread. * target.c (the_target): Now a process_stratum_target. (done_accessing_memory): Pass the target to switch_to_thread. (set_target_ops): Ajust to use process_stratum_target. * target.h (struct target_ops): Rename to ... (struct process_stratum_target): ... this. (the_target, set_target_ops): Adjust. (prepare_to_access_memory): Adjust comment. * win32-low.c (child_xfer_memory): Adjust to use process_stratum_target. (win32_target_ops): Now a process_stratum_target.
2020-01-10 21:06:08 +01:00
for (inferior *inf : all_inferiors ())
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
{
Multi-target support This commit adds multi-target support to GDB. What this means is that with this commit, GDB can now be connected to different targets at the same time. E.g., you can debug a live native process and a core dump at the same time, connect to multiple gdbservers, etc. Actually, the word "target" is overloaded in gdb. We already have a target stack, with pushes several target_ops instances on top of one another. We also have "info target" already, which means something completely different to what this patch does. So from here on, I'll be using the "target connections" term, to mean an open process_stratum target, pushed on a target stack. This patch makes gdb have multiple target stacks, and multiple process_stratum targets open simultaneously. The user-visible changes / commands will also use this terminology, but of course it's all open to debate. User-interface-wise, not that much changes. The main difference is that each inferior may have its own target connection. A target connection (e.g., a target extended-remote connection) may support debugging multiple processes, just as before. Say you're debugging against gdbserver in extended-remote mode, and you do "add-inferior" to prepare to spawn a new process, like: (gdb) target extended-remote :9999 ... (gdb) start ... (gdb) add-inferior Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] (gdb) file a.out ... (gdb) start ... At this point, you have two inferiors connected to the same gdbserver. With this commit, GDB will maintain a target stack per inferior, instead of a global target stack. To preserve the behavior above, by default, "add-inferior" makes the new inferior inherit a copy of the target stack of the current inferior. Same across a fork - the child inherits a copy of the target stack of the parent. While the target stacks are copied, the targets themselves are not. Instead, target_ops is made a refcounted_object, which means that target_ops instances are refcounted, which each inferior counting for a reference. What if you want to create an inferior and connect it to some _other_ target? For that, this commit introduces a new "add-inferior -no-connection" option that makes the new inferior not share the current inferior's target. So you could do: (gdb) target extended-remote :9999 Remote debugging using :9999 ... (gdb) add-inferior -no-connection [New inferior 2] Added inferior 2 (gdb) inferior 2 [Switching to inferior 2 [<null>] (<noexec>)] (gdb) info inferiors Num Description Executable 1 process 18401 target:/home/pedro/tmp/main * 2 <null> (gdb) tar extended-remote :10000 Remote debugging using :10000 ... (gdb) info inferiors Num Description Executable 1 process 18401 target:/home/pedro/tmp/main * 2 process 18450 target:/home/pedro/tmp/main (gdb) A following patch will extended "info inferiors" to include a column indicating which connection an inferior is bound to, along with a couple other UI tweaks. Other than that, debugging is the same as before. Users interact with inferiors and threads as before. The only difference is that inferiors may be bound to processes running in different machines. That's pretty much all there is to it in terms of noticeable UI changes. On to implementation. Since we can be connected to different systems at the same time, a ptid_t is no longer a unique identifier. Instead a thread can be identified by a pair of ptid_t and 'process_stratum_target *', the later being the instance of the process_stratum target that owns the process/thread. Note that process_stratum_target inherits from target_ops, and all process_stratum targets inherit from process_stratum_target. In earlier patches, many places in gdb were converted to refer to threads by thread_info pointer instead of ptid_t, but there are still places in gdb where we start with a pid/tid and need to find the corresponding inferior or thread_info objects. So you'll see in the patch many places adding a process_stratum_target parameter to functions that used to take only a ptid_t. Since each inferior has its own target stack now, we can always find the process_stratum target for an inferior. That is done via a inf->process_target() convenience method. Since each inferior has its own target stack, we need to handle the "beneath" calls when servicing target calls. The solution I settled with is just to make sure to switch the current inferior to the inferior you want before making a target call. Not relying on global context is just not feasible in current GDB. Fortunately, there aren't that many places that need to do that, because generally most code that calls target methods already has the current context pointing to the right inferior/thread. Note, to emphasize -- there's no method to "switch to this target stack". Instead, you switch the current inferior, and that implicitly switches the target stack. In some spots, we need to iterate over all inferiors so that we reach all target stacks. Native targets are still singletons. There's always only a single instance of such targets. Remote targets however, we'll have one instance per remote connection. The exec target is still a singleton. There's only one instance. I did not see the point of instanciating more than one exec_target object. After vfork, we need to make sure to push the exec target on the new inferior. See exec_on_vfork. For type safety, functions that need a {target, ptid} pair to identify a thread, take a process_stratum_target pointer for target parameter instead of target_ops *. Some shared code in gdb/nat/ also need to gain a target pointer parameter. This poses an issue, since gdbserver doesn't have process_stratum_target, only target_ops. To fix this, this commit renames gdbserver's target_ops to process_stratum_target. I think this makes sense. There's no concept of target stack in gdbserver, and gdbserver's target_ops really implements a process_stratum-like target. The thread and inferior iterator functions also gain process_stratum_target parameters. These are used to be able to iterate over threads and inferiors of a given target. Following usual conventions, if the target pointer is null, then we iterate over threads and inferiors of all targets. I tried converting "add-inferior" to the gdb::option framework, as a preparatory patch, but that stumbled on the fact that gdb::option does not support file options yet, for "add-inferior -exec". I have a WIP patchset that adds that, but it's not a trivial patch, mainly due to need to integrate readline's filename completion, so I deferred that to some other time. In infrun.c/infcmd.c, the main change is that we need to poll events out of all targets. See do_target_wait. Right after collecting an event, we switch the current inferior to an inferior bound to the target that reported the event, so that target methods can be used while handling the event. This makes most of the code transparent to multi-targets. See fetch_inferior_event. infrun.c:stop_all_threads is interesting -- in this function we need to stop all threads of all targets. What the function does is send an asynchronous stop request to all threads, and then synchronously waits for events, with target_wait, rinse repeat, until all it finds are stopped threads. Now that we have multiple targets, it's not efficient to synchronously block in target_wait waiting for events out of one target. Instead, we implement a mini event loop, with interruptible_select, select'ing on one file descriptor per target. For this to work, we need to be able to ask the target for a waitable file descriptor. Such file descriptors already exist, they are the descriptors registered in the main event loop with add_file_handler, inside the target_async implementations. This commit adds a new target_async_wait_fd target method that just returns the file descriptor in question. See wait_one / stop_all_threads in infrun.c. The 'threads_executing' global is made a per-target variable. Since it is only relevant to process_stratum_target targets, this is where it is put, instead of in target_ops. You'll notice that remote.c includes some FIXME notes. These refer to the fact that the global arrays that hold data for the remote packets supported are still globals. For example, if we connect to two different servers/stubs, then each might support different remote protocol features. They might even be different architectures, like e.g., one ARM baremetal stub, and a x86 gdbserver, to debug a host/controller scenario as a single program. That isn't going to work correctly today, because of said globals. I'm leaving fixing that for another pass, since it does not appear to be trivial, and I'd rather land the base work first. It's already useful to be able to debug multiple instances of the same server (e.g., a distributed cluster, where you have full control over the servers installed), so I think as is it's already reasonable incremental progress. Current limitations: - You can only resume more that one target at the same time if all targets support asynchronous debugging, and support non-stop mode. It should be possible to support mixed all-stop + non-stop backends, but that is left for another time. This means that currently in order to do multi-target with gdbserver you need to issue "maint set target-non-stop on". I would like to make that mode be the default, but we're not there yet. Note that I'm talking about how the target backend works, only. User-visible all-stop mode works just fine. - As explained above, connecting to different remote servers at the same time is likely to produce bad results if they don't support the exact set of RSP features. FreeBSD updates courtesy of John Baldwin. gdb/ChangeLog: 2020-01-10 Pedro Alves <palves@redhat.com> John Baldwin <jhb@FreeBSD.org> * aarch64-linux-nat.c (aarch64_linux_nat_target::thread_architecture): Adjust. * ada-tasks.c (print_ada_task_info): Adjust find_thread_ptid call. (task_command_1): Likewise. * aix-thread.c (sync_threadlists, aix_thread_target::resume) (aix_thread_target::wait, aix_thread_target::fetch_registers) (aix_thread_target::store_registers) (aix_thread_target::thread_alive): Adjust. * amd64-fbsd-tdep.c: Include "inferior.h". (amd64fbsd_get_thread_local_address): Pass down target. * amd64-linux-nat.c (ps_get_thread_area): Use ps_prochandle thread's gdbarch instead of target_gdbarch. * break-catch-sig.c (signal_catchpoint_print_it): Adjust call to get_last_target_status. * break-catch-syscall.c (print_it_catch_syscall): Likewise. * breakpoint.c (breakpoints_should_be_inserted_now): Consider all inferiors. (update_inserted_breakpoint_locations): Skip if inferiors with no execution. (update_global_location_list): When handling moribund locations, find representative inferior for location's pspace, and use thread count of its process_stratum target. * bsd-kvm.c (bsd_kvm_target_open): Pass target down. * bsd-uthread.c (bsd_uthread_target::wait): Use as_process_stratum_target and adjust thread_change_ptid and add_thread calls. (bsd_uthread_target::update_thread_list): Use as_process_stratum_target and adjust find_thread_ptid, thread_change_ptid and add_thread calls. * btrace.c (maint_btrace_packet_history_cmd): Adjust find_thread_ptid call. * corelow.c (add_to_thread_list): Adjust add_thread call. (core_target_open): Adjust add_thread_silent and thread_count calls. (core_target::pid_to_str): Adjust find_inferior_ptid call. * ctf.c (ctf_target_open): Adjust add_thread_silent call. * event-top.c (async_disconnect): Pop targets from all inferiors. * exec.c (add_target_sections): Push exec target on all inferiors sharing the program space. (remove_target_sections): Remove the exec target from all inferiors sharing the program space. (exec_on_vfork): New. * exec.h (exec_on_vfork): Declare. * fbsd-nat.c (fbsd_add_threads): Add fbsd_nat_target parameter. Pass it down. (fbsd_nat_target::update_thread_list): Adjust. (fbsd_nat_target::resume): Adjust. (fbsd_handle_debug_trap): Add fbsd_nat_target parameter. Pass it down. (fbsd_nat_target::wait, fbsd_nat_target::post_attach): Adjust. * fbsd-tdep.c (fbsd_corefile_thread): Adjust get_thread_arch_regcache call. * fork-child.c (gdb_startup_inferior): Pass target down to startup_inferior and set_executing. * gdbthread.h (struct process_stratum_target): Forward declare. (add_thread, add_thread_silent, add_thread_with_info) (in_thread_list): Add process_stratum_target parameter. (find_thread_ptid(inferior*, ptid_t)): New overload. (find_thread_ptid, thread_change_ptid): Add process_stratum_target parameter. (all_threads()): Delete overload. (all_threads, all_non_exited_threads): Add process_stratum_target parameter. (all_threads_safe): Use brace initialization. (thread_count): Add process_stratum_target parameter. (set_resumed, set_running, set_stop_requested, set_executing) (threads_are_executing, finish_thread_state): Add process_stratum_target parameter. (switch_to_thread): Use is_current_thread. * i386-fbsd-tdep.c: Include "inferior.h". (i386fbsd_get_thread_local_address): Pass down target. * i386-linux-nat.c (i386_linux_nat_target::low_resume): Adjust. * inf-child.c (inf_child_target::maybe_unpush_target): Remove have_inferiors check. * inf-ptrace.c (inf_ptrace_target::create_inferior) (inf_ptrace_target::attach): Adjust. * infcall.c (run_inferior_call): Adjust. * infcmd.c (run_command_1): Pass target to scoped_finish_thread_state. (proceed_thread_callback): Skip inferiors with no execution. (continue_command): Rename 'all_threads' local to avoid hiding 'all_threads' function. Adjust get_last_target_status call. (prepare_one_step): Adjust set_running call. (signal_command): Use user_visible_resume_target. Compare thread pointers instead of inferior_ptid. (info_program_command): Adjust to pass down target. (attach_command): Mark target's 'thread_executing' flag. (stop_current_target_threads_ns): New, factored out from ... (interrupt_target_1): ... this. Switch inferior before making target calls. * inferior-iter.h (struct all_inferiors_iterator, struct all_inferiors_range) (struct all_inferiors_safe_range) (struct all_non_exited_inferiors_range): Filter on process_stratum_target too. Remove explicit. * inferior.c (inferior::inferior): Push dummy target on target stack. (find_inferior_pid, find_inferior_ptid, number_of_live_inferiors): Add process_stratum_target parameter, and pass it down. (have_live_inferiors): Adjust. (switch_to_inferior_and_push_target): New. (add_inferior_command, clone_inferior_command): Handle "-no-connection" parameter. Use switch_to_inferior_and_push_target. (_initialize_inferior): Mention "-no-connection" option in the help of "add-inferior" and "clone-inferior" commands. * inferior.h: Include "process-stratum-target.h". (interrupt_target_1): Use bool. (struct inferior) <push_target, unpush_target, target_is_pushed, find_target_beneath, top_target, process_target, target_at, m_stack>: New. (discard_all_inferiors): Delete. (find_inferior_pid, find_inferior_ptid, number_of_live_inferiors) (all_inferiors, all_non_exited_inferiors): Add process_stratum_target parameter. * infrun.c: Include "gdb_select.h" and <unordered_map>. (target_last_proc_target): New global. (follow_fork_inferior): Push target on new inferior. Pass target to add_thread_silent. Call exec_on_vfork. Handle target's reference count. (follow_fork): Adjust get_last_target_status call. Also consider target. (follow_exec): Push target on new inferior. (struct execution_control_state) <target>: New field. (user_visible_resume_target): New. (do_target_resume): Call target_async. (resume_1): Set target's threads_executing flag. Consider resume target. (commit_resume_all_targets): New. (proceed): Also consider resume target. Skip threads of inferiors with no execution. Commit resumtion in all targets. (start_remote): Pass current inferior to wait_for_inferior. (infrun_thread_stop_requested): Consider target as well. Pass thread_info pointer to clear_inline_frame_state instead of ptid. (infrun_thread_thread_exit): Consider target as well. (random_pending_event_thread): New inferior parameter. Use it. (do_target_wait): Rename to ... (do_target_wait_1): ... this. Add inferior parameter, and pass it down. (threads_are_resumed_pending_p, do_target_wait): New. (prepare_for_detach): Adjust calls. (wait_for_inferior): New inferior parameter. Handle it. Use do_target_wait_1 instead of do_target_wait. (fetch_inferior_event): Adjust. Switch to representative inferior. Pass target down. (set_last_target_status): Add process_stratum_target parameter. Save target in global. (get_last_target_status): Add process_stratum_target parameter and handle it. (nullify_last_target_wait_ptid): Clear 'target_last_proc_target'. (context_switch): Check inferior_ptid == null_ptid before calling inferior_thread(). (get_inferior_stop_soon): Pass down target. (wait_one): Rename to ... (poll_one_curr_target): ... this. (struct wait_one_event): New. (wait_one): New. (stop_all_threads): Adjust. (handle_no_resumed, handle_inferior_event): Adjust to consider the event's target. (switch_back_to_stepped_thread): Also consider target. (print_stop_event): Update. (normal_stop): Update. Also consider the resume target. * infrun.h (wait_for_inferior): Remove declaration. (user_visible_resume_target): New declaration. (get_last_target_status, set_last_target_status): New process_stratum_target parameter. * inline-frame.c (clear_inline_frame_state(ptid_t)): Add process_stratum_target parameter, and use it. (clear_inline_frame_state (thread_info*)): New. * inline-frame.c (clear_inline_frame_state(ptid_t)): Add process_stratum_target parameter. (clear_inline_frame_state (thread_info*)): Declare. * linux-fork.c (delete_checkpoint_command): Pass target down to find_thread_ptid. (checkpoint_command): Adjust. * linux-nat.c (linux_nat_target::follow_fork): Switch to thread instead of just tweaking inferior_ptid. (linux_nat_switch_fork): Pass target down to thread_change_ptid. (exit_lwp): Pass target down to find_thread_ptid. (attach_proc_task_lwp_callback): Pass target down to add_thread/set_running/set_executing. (linux_nat_target::attach): Pass target down to thread_change_ptid. (get_detach_signal): Pass target down to find_thread_ptid. Consider last target status's target. (linux_resume_one_lwp_throw, resume_lwp) (linux_handle_syscall_trap, linux_handle_extended_wait, wait_lwp) (stop_wait_callback, save_stop_reason, linux_nat_filter_event) (linux_nat_wait_1, resume_stopped_resumed_lwps): Pass target down. (linux_nat_target::async_wait_fd): New. (linux_nat_stop_lwp, linux_nat_target::thread_address_space): Pass target down. * linux-nat.h (linux_nat_target::async_wait_fd): Declare. * linux-tdep.c (get_thread_arch_regcache): Pass target down. * linux-thread-db.c (struct thread_db_info::process_target): New field. (add_thread_db_info): Save target. (get_thread_db_info): New process_stratum_target parameter. Also match target. (delete_thread_db_info): New process_stratum_target parameter. Also match target. (thread_from_lwp): Adjust to pass down target. (thread_db_notice_clone): Pass down target. (check_thread_db_callback): Pass down target. (try_thread_db_load_1): Always push the thread_db target. (try_thread_db_load, record_thread): Pass target down. (thread_db_target::detach): Pass target down. Always unpush the thread_db target. (thread_db_target::wait, thread_db_target::mourn_inferior): Pass target down. Always unpush the thread_db target. (find_new_threads_callback, thread_db_find_new_threads_2) (thread_db_target::update_thread_list): Pass target down. (thread_db_target::pid_to_str): Pass current inferior down. (thread_db_target::get_thread_local_address): Pass target down. (thread_db_target::resume, maintenance_check_libthread_db): Pass target down. * nto-procfs.c (nto_procfs_target::update_thread_list): Adjust. * procfs.c (procfs_target::procfs_init_inferior): Declare. (proc_set_current_signal, do_attach, procfs_target::wait): Adjust. (procfs_init_inferior): Rename to ... (procfs_target::procfs_init_inferior): ... this and adjust. (procfs_target::create_inferior, procfs_notice_thread) (procfs_do_thread_registers): Adjust. * ppc-fbsd-tdep.c: Include "inferior.h". (ppcfbsd_get_thread_local_address): Pass down target. * proc-service.c (ps_xfer_memory): Switch current inferior and program space as well. (get_ps_regcache): Pass target down. * process-stratum-target.c (process_stratum_target::thread_address_space) (process_stratum_target::thread_architecture): Pass target down. * process-stratum-target.h (process_stratum_target::threads_executing): New field. (as_process_stratum_target): New. * ravenscar-thread.c (ravenscar_thread_target::update_inferior_ptid): Pass target down. (ravenscar_thread_target::wait, ravenscar_add_thread): Pass target down. * record-btrace.c (record_btrace_target::info_record): Adjust. (record_btrace_target::record_method) (record_btrace_target::record_is_replaying) (record_btrace_target::fetch_registers) (get_thread_current_frame_id, record_btrace_target::resume) (record_btrace_target::wait, record_btrace_target::stop): Pass target down. * record-full.c (record_full_wait_1): Switch to event thread. Pass target down. * regcache.c (regcache::regcache) (get_thread_arch_aspace_regcache, get_thread_arch_regcache): Add process_stratum_target parameter and handle it. (current_thread_target): New global. (get_thread_regcache): Add process_stratum_target parameter and handle it. Switch inferior before calling target method. (get_thread_regcache): Pass target down. (get_thread_regcache_for_ptid): Pass target down. (registers_changed_ptid): Add process_stratum_target parameter and handle it. (registers_changed_thread, registers_changed): Pass target down. (test_get_thread_arch_aspace_regcache): New. (current_regcache_test): Define a couple local test_target_ops instances and use them for testing. (readwrite_regcache): Pass process_stratum_target parameter. (cooked_read_test, cooked_write_test): Pass mock_target down. * regcache.h (get_thread_regcache, get_thread_arch_regcache) (get_thread_arch_aspace_regcache): Add process_stratum_target parameter. (regcache::target): New method. (regcache::regcache, regcache::get_thread_arch_aspace_regcache) (regcache::registers_changed_ptid): Add process_stratum_target parameter. (regcache::m_target): New field. (registers_changed_ptid): Add process_stratum_target parameter. * remote.c (remote_state::supports_vCont_probed): New field. (remote_target::async_wait_fd): New method. (remote_unpush_and_throw): Add remote_target parameter. (get_current_remote_target): Adjust. (remote_target::remote_add_inferior): Push target. (remote_target::remote_add_thread) (remote_target::remote_notice_new_inferior) (get_remote_thread_info): Pass target down. (remote_target::update_thread_list): Skip threads of inferiors bound to other targets. (remote_target::close): Don't discard inferiors. (remote_target::add_current_inferior_and_thread) (remote_target::process_initial_stop_replies) (remote_target::start_remote) (remote_target::remote_serial_quit_handler): Pass down target. (remote_target::remote_unpush_target): New remote_target parameter. Unpush the target from all inferiors. (remote_target::remote_unpush_and_throw): New remote_target parameter. Pass it down. (remote_target::open_1): Check whether the current inferior has execution instead of checking whether any inferior is live. Pass target down. (remote_target::remote_detach_1): Pass down target. Use remote_unpush_target. (extended_remote_target::attach): Pass down target. (remote_target::remote_vcont_probe): Set supports_vCont_probed. (remote_target::append_resumption): Pass down target. (remote_target::append_pending_thread_resumptions) (remote_target::remote_resume_with_hc, remote_target::resume) (remote_target::commit_resume): Pass down target. (remote_target::remote_stop_ns): Check supports_vCont_probed. (remote_target::interrupt_query) (remote_target::remove_new_fork_children) (remote_target::check_pending_events_prevent_wildcard_vcont) (remote_target::remote_parse_stop_reply) (remote_target::process_stop_reply): Pass down target. (first_remote_resumed_thread): New remote_target parameter. Pass it down. (remote_target::wait_as): Pass down target. (unpush_and_perror): New remote_target parameter. Pass it down. (remote_target::readchar, remote_target::remote_serial_write) (remote_target::getpkt_or_notif_sane_1) (remote_target::kill_new_fork_children, remote_target::kill): Pass down target. (remote_target::mourn_inferior): Pass down target. Use remote_unpush_target. (remote_target::core_of_thread) (remote_target::remote_btrace_maybe_reopen): Pass down target. (remote_target::pid_to_exec_file) (remote_target::thread_handle_to_thread_info): Pass down target. (remote_target::async_wait_fd): New. * riscv-fbsd-tdep.c: Include "inferior.h". (riscv_fbsd_get_thread_local_address): Pass down target. * sol2-tdep.c (sol2_core_pid_to_str): Pass down target. * sol-thread.c (sol_thread_target::wait, ps_lgetregs, ps_lsetregs) (ps_lgetfpregs, ps_lsetfpregs, sol_update_thread_list_callback): Adjust. * solib-spu.c (spu_skip_standalone_loader): Pass down target. * solib-svr4.c (enable_break): Pass down target. * spu-multiarch.c (parse_spufs_run): Pass down target. * spu-tdep.c (spu2ppu_sniffer): Pass down target. * target-delegates.c: Regenerate. * target.c (g_target_stack): Delete. (current_top_target): Return the current inferior's top target. (target_has_execution_1): Refer to the passed-in inferior's top target. (target_supports_terminal_ours): Check whether the initial inferior was already created. (decref_target): New. (target_stack::push): Incref/decref the target. (push_target, push_target, unpush_target): Adjust. (target_stack::unpush): Defref target. (target_is_pushed): Return bool. Adjust to refer to the current inferior's target stack. (dispose_inferior): Delete, and inline parts ... (target_preopen): ... here. Only dispose of the current inferior. (target_detach): Hold strong target reference while detaching. Pass target down. (target_thread_name): Add assertion. (target_resume): Pass down target. (target_ops::beneath, find_target_at): Adjust to refer to the current inferior's target stack. (get_dummy_target): New. (target_pass_ctrlc): Pass the Ctrl-C to the first inferior that has a thread running. (initialize_targets): Rename to ... (_initialize_target): ... this. * target.h: Include "gdbsupport/refcounted-object.h". (struct target_ops): Inherit refcounted_object. (target_ops::shortname, target_ops::longname): Make const. (target_ops::async_wait_fd): New method. (decref_target): Declare. (struct target_ops_ref_policy): New. (target_ops_ref): New typedef. (get_dummy_target): Declare function. (target_is_pushed): Return bool. * thread-iter.c (all_matching_threads_iterator::m_inf_matches) (all_matching_threads_iterator::all_matching_threads_iterator): Handle filter target. * thread-iter.h (struct all_matching_threads_iterator, struct all_matching_threads_range, class all_non_exited_threads_range): Filter by target too. Remove explicit. * thread.c (threads_executing): Delete. (inferior_thread): Pass down current inferior. (clear_thread_inferior_resources): Pass down thread pointer instead of ptid_t. (add_thread_silent, add_thread_with_info, add_thread): Add process_stratum_target parameter. Use it for thread and inferior searches. (is_current_thread): New. (thread_info::deletable): Use it. (find_thread_ptid, thread_count, in_thread_list) (thread_change_ptid, set_resumed, set_running): New process_stratum_target parameter. Pass it down. (set_executing): New process_stratum_target parameter. Pass it down. Adjust reference to 'threads_executing'. (threads_are_executing): New process_stratum_target parameter. Adjust reference to 'threads_executing'. (set_stop_requested, finish_thread_state): New process_stratum_target parameter. Pass it down. (switch_to_thread): Also match inferior. (switch_to_thread): New process_stratum_target parameter. Pass it down. (update_threads_executing): Reimplement. * top.c (quit_force): Pop targets from all inferior. (gdb_init): Don't call initialize_targets. * windows-nat.c (windows_nat_target) <get_windows_debug_event>: Declare. (windows_add_thread, windows_delete_thread): Adjust. (get_windows_debug_event): Rename to ... (windows_nat_target::get_windows_debug_event): ... this. Adjust. * tracefile-tfile.c (tfile_target_open): Pass down target. * gdbsupport/common-gdbthread.h (struct process_stratum_target): Forward declare. (switch_to_thread): Add process_stratum_target parameter. * mi/mi-interp.c (mi_on_resume_1): Add process_stratum_target parameter. Use it. (mi_on_resume): Pass target down. * nat/fork-inferior.c (startup_inferior): Add process_stratum_target parameter. Pass it down. * nat/fork-inferior.h (startup_inferior): Add process_stratum_target parameter. * python/py-threadevent.c (py_get_event_thread): Pass target down. gdb/gdbserver/ChangeLog: 2020-01-10 Pedro Alves <palves@redhat.com> * fork-child.c (post_fork_inferior): Pass target down to startup_inferior. * inferiors.c (switch_to_thread): Add process_stratum_target parameter. * lynx-low.c (lynx_target_ops): Now a process_stratum_target. * nto-low.c (nto_target_ops): Now a process_stratum_target. * linux-low.c (linux_target_ops): Now a process_stratum_target. * remote-utils.c (prepare_resume_reply): Pass the target to switch_to_thread. * target.c (the_target): Now a process_stratum_target. (done_accessing_memory): Pass the target to switch_to_thread. (set_target_ops): Ajust to use process_stratum_target. * target.h (struct target_ops): Rename to ... (struct process_stratum_target): ... this. (the_target, set_target_ops): Adjust. (prepare_to_access_memory): Adjust comment. * win32-low.c (child_xfer_memory): Adjust to use process_stratum_target. (win32_target_ops): Now a process_stratum_target.
2020-01-10 21:06:08 +01:00
switch_to_inferior_no_thread (inf);
try
{
pop_all_targets ();
}
catch (const gdb_exception &ex)
{
exception_print (gdb_stderr, ex);
}
Split TRY_CATCH into TRY + CATCH This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.
2015-03-07 16:14:14 +01:00
}
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
/* Save the history information if it is appropriate to do so. */
Rewrite TRY/CATCH This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.
2019-04-04 00:02:42 +02:00
try
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
{
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
if (write_history_p && history_filename)
{
struct ui *ui;
int save = 0;
/* History is currently shared between all UIs. If there's
any UI with a terminal, save history. */
ALL_UIS (ui)
{
if (input_interactive_p (ui))
{
save = 1;
break;
}
}
if (save)
gdb_safe_append_history ();
}
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
}
Rename gdb exception types This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.
2019-04-03 23:59:07 +02:00
catch (const gdb_exception &ex)
Split TRY_CATCH into TRY + CATCH This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.
2015-03-07 16:14:14 +01:00
{
exception_print (gdb_stderr, ex);
}
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
/* Destroy any values currently allocated now instead of leaving it
to global destructors, because that may be too late. For
example, the destructors of xmethod values call into the Python
runtime, which is finalized via a final cleanup. */
finalize_values ();
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
/* Do any final cleanups before exiting. */
Rewrite TRY/CATCH This rewrites gdb's TRY/CATCH to plain C++ try/catch. The patch was largely written by script, though one change (to a comment in common-exceptions.h) was reverted by hand. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * xml-support.c: Use C++ exception handling. * x86-linux-nat.c: Use C++ exception handling. * windows-nat.c: Use C++ exception handling. * varobj.c: Use C++ exception handling. * value.c: Use C++ exception handling. * valprint.c: Use C++ exception handling. * valops.c: Use C++ exception handling. * unittests/parse-connection-spec-selftests.c: Use C++ exception handling. * unittests/cli-utils-selftests.c: Use C++ exception handling. * typeprint.c: Use C++ exception handling. * tui/tui.c: Use C++ exception handling. * tracefile-tfile.c: Use C++ exception handling. * top.c: Use C++ exception handling. * thread.c: Use C++ exception handling. * target.c: Use C++ exception handling. * symmisc.c: Use C++ exception handling. * symfile-mem.c: Use C++ exception handling. * stack.c: Use C++ exception handling. * sparc64-linux-tdep.c: Use C++ exception handling. * solib.c: Use C++ exception handling. * solib-svr4.c: Use C++ exception handling. * solib-spu.c: Use C++ exception handling. * solib-frv.c: Use C++ exception handling. * solib-dsbt.c: Use C++ exception handling. * selftest-arch.c: Use C++ exception handling. * s390-tdep.c: Use C++ exception handling. * rust-lang.c: Use C++ exception handling. * rust-exp.y: Use C++ exception handling. * rs6000-tdep.c: Use C++ exception handling. * rs6000-aix-tdep.c: Use C++ exception handling. * riscv-tdep.c: Use C++ exception handling. * remote.c: Use C++ exception handling. * remote-fileio.c: Use C++ exception handling. * record-full.c: Use C++ exception handling. * record-btrace.c: Use C++ exception handling. * python/python.c: Use C++ exception handling. * python/py-value.c: Use C++ exception handling. * python/py-utils.c: Use C++ exception handling. * python/py-unwind.c: Use C++ exception handling. * python/py-type.c: Use C++ exception handling. * python/py-symbol.c: Use C++ exception handling. * python/py-record.c: Use C++ exception handling. * python/py-record-btrace.c: Use C++ exception handling. * python/py-progspace.c: Use C++ exception handling. * python/py-prettyprint.c: Use C++ exception handling. * python/py-param.c: Use C++ exception handling. * python/py-objfile.c: Use C++ exception handling. * python/py-linetable.c: Use C++ exception handling. * python/py-lazy-string.c: Use C++ exception handling. * python/py-infthread.c: Use C++ exception handling. * python/py-inferior.c: Use C++ exception handling. * python/py-gdb-readline.c: Use C++ exception handling. * python/py-framefilter.c: Use C++ exception handling. * python/py-frame.c: Use C++ exception handling. * python/py-finishbreakpoint.c: Use C++ exception handling. * python/py-cmd.c: Use C++ exception handling. * python/py-breakpoint.c: Use C++ exception handling. * python/py-arch.c: Use C++ exception handling. * printcmd.c: Use C++ exception handling. * ppc-linux-tdep.c: Use C++ exception handling. * parse.c: Use C++ exception handling. * p-valprint.c: Use C++ exception handling. * objc-lang.c: Use C++ exception handling. * mi/mi-main.c: Use C++ exception handling. * mi/mi-interp.c: Use C++ exception handling. * mi/mi-cmd-stack.c: Use C++ exception handling. * mi/mi-cmd-break.c: Use C++ exception handling. * main.c: Use C++ exception handling. * linux-thread-db.c: Use C++ exception handling. * linux-tdep.c: Use C++ exception handling. * linux-nat.c: Use C++ exception handling. * linux-fork.c: Use C++ exception handling. * linespec.c: Use C++ exception handling. * language.c: Use C++ exception handling. * jit.c: Use C++ exception handling. * infrun.c: Use C++ exception handling. * infcmd.c: Use C++ exception handling. * infcall.c: Use C++ exception handling. * inf-loop.c: Use C++ exception handling. * i386-tdep.c: Use C++ exception handling. * i386-linux-tdep.c: Use C++ exception handling. * guile/scm-value.c: Use C++ exception handling. * guile/scm-type.c: Use C++ exception handling. * guile/scm-symtab.c: Use C++ exception handling. * guile/scm-symbol.c: Use C++ exception handling. * guile/scm-pretty-print.c: Use C++ exception handling. * guile/scm-ports.c: Use C++ exception handling. * guile/scm-param.c: Use C++ exception handling. * guile/scm-math.c: Use C++ exception handling. * guile/scm-lazy-string.c: Use C++ exception handling. * guile/scm-frame.c: Use C++ exception handling. * guile/scm-disasm.c: Use C++ exception handling. * guile/scm-cmd.c: Use C++ exception handling. * guile/scm-breakpoint.c: Use C++ exception handling. * guile/scm-block.c: Use C++ exception handling. * guile/guile-internal.h: Use C++ exception handling. * gnu-v3-abi.c: Use C++ exception handling. * gdbtypes.c: Use C++ exception handling. * frame.c: Use C++ exception handling. * frame-unwind.c: Use C++ exception handling. * fbsd-tdep.c: Use C++ exception handling. * f-valprint.c: Use C++ exception handling. * exec.c: Use C++ exception handling. * event-top.c: Use C++ exception handling. * event-loop.c: Use C++ exception handling. * eval.c: Use C++ exception handling. * dwarf2read.c: Use C++ exception handling. * dwarf2loc.c: Use C++ exception handling. * dwarf2-frame.c: Use C++ exception handling. * dwarf2-frame-tailcall.c: Use C++ exception handling. * dwarf-index-write.c: Use C++ exception handling. * dwarf-index-cache.c: Use C++ exception handling. * dtrace-probe.c: Use C++ exception handling. * disasm-selftests.c: Use C++ exception handling. * darwin-nat.c: Use C++ exception handling. * cp-valprint.c: Use C++ exception handling. * cp-support.c: Use C++ exception handling. * cp-abi.c: Use C++ exception handling. * corelow.c: Use C++ exception handling. * completer.c: Use C++ exception handling. * compile/compile-object-run.c: Use C++ exception handling. * compile/compile-object-load.c: Use C++ exception handling. * compile/compile-cplus-symbols.c: Use C++ exception handling. * compile/compile-c-symbols.c: Use C++ exception handling. * common/selftest.c: Use C++ exception handling. * common/new-op.c: Use C++ exception handling. * cli/cli-script.c: Use C++ exception handling. * cli/cli-interp.c: Use C++ exception handling. * cli/cli-cmds.c: Use C++ exception handling. * c-varobj.c: Use C++ exception handling. * btrace.c: Use C++ exception handling. * breakpoint.c: Use C++ exception handling. * break-catch-throw.c: Use C++ exception handling. * arch-utils.c: Use C++ exception handling. * amd64-tdep.c: Use C++ exception handling. * ada-valprint.c: Use C++ exception handling. * ada-typeprint.c: Use C++ exception handling. * ada-lang.c: Use C++ exception handling. * aarch64-tdep.c: Use C++ exception handling. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * server.c: Use C++ exception handling. * linux-low.c: Use C++ exception handling. * gdbreplay.c: Use C++ exception handling.
2019-04-04 00:02:42 +02:00
try
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
{
do_final_cleanups ();
make -gdb-exit call disconnect_tracing too, and don't lose history if the target errors on "quit" Gareth mentions in PR gdb/15275: "The MI '-gdb-exit' command mi_cmd_gdb_exit() never calls disconnect_tracing() and therefore exits correctly." It should, so to get out of tfind mode, as quit may detach instead of kill, and we don't want to confuse the memory/register accesses etc. of the detach process. So we should push down the disconnect tracing bits at least to quit_force. But we can't as is, as that would swallow the error thrown by answering "no" to: Trace is running but will stop on detach; detach anyway? (y or n) So to address that, we split disconnect_tracing in two. One part that does the query, and another part that does the rest, and we make quit_force call the latter. Looking at quit_force, it does several things, some of which are a bit independent of the others. It first kills/detaches, and then writes history, and then runs the final cleanups. It seems better to me to do each of these things even if the previous thing throws. E.g., as is, if something throws while detaching, then we skip writing history. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-cmds.c (quit_command): Call query_if_trace_running instead of disconnect_tracing. * infcmd.c (detach_command, disconnect_command): Call query_if_trace_running. Adjust. * top.c: Include "tracepoint.h". (quit_target): Delete. Contents moved ... (quit_force): ... here. Wrap each stage of teardown in TRY_CATCH. Call disconnect_tracing before detaching.
2013-04-10 16:10:35 +02:00
}
Rename gdb exception types This renames the gdb exception types. The old types were only needed due to the macros in common-exception.h that are now gone. The intermediate layer of gdb_exception_RETURN_MASK_ALL did not seem needed, so this patch removes it entirely. gdb/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * common/common-exceptions.h (gdb_exception_RETURN_MASK_ALL): Remove. (gdb_exception_error): Rename from gdb_exception_RETURN_MASK_ERROR. (gdb_exception_quit): Rename from gdb_exception_RETURN_MASK_QUIT. (gdb_quit_bad_alloc): Update. * aarch64-tdep.c: Update. * ada-lang.c: Update. * ada-typeprint.c: Update. * ada-valprint.c: Update. * amd64-tdep.c: Update. * arch-utils.c: Update. * break-catch-throw.c: Update. * breakpoint.c: Update. * btrace.c: Update. * c-varobj.c: Update. * cli/cli-cmds.c: Update. * cli/cli-interp.c: Update. * cli/cli-script.c: Update. * common/common-exceptions.c: Update. * common/new-op.c: Update. * common/selftest.c: Update. * compile/compile-c-symbols.c: Update. * compile/compile-cplus-symbols.c: Update. * compile/compile-object-load.c: Update. * compile/compile-object-run.c: Update. * completer.c: Update. * corelow.c: Update. * cp-abi.c: Update. * cp-support.c: Update. * cp-valprint.c: Update. * darwin-nat.c: Update. * disasm-selftests.c: Update. * dtrace-probe.c: Update. * dwarf-index-cache.c: Update. * dwarf-index-write.c: Update. * dwarf2-frame-tailcall.c: Update. * dwarf2-frame.c: Update. * dwarf2loc.c: Update. * dwarf2read.c: Update. * eval.c: Update. * event-loop.c: Update. * event-top.c: Update. * exec.c: Update. * f-valprint.c: Update. * fbsd-tdep.c: Update. * frame-unwind.c: Update. * frame.c: Update. * gdbtypes.c: Update. * gnu-v3-abi.c: Update. * guile/guile-internal.h: Update. * guile/scm-block.c: Update. * guile/scm-breakpoint.c: Update. * guile/scm-cmd.c: Update. * guile/scm-disasm.c: Update. * guile/scm-frame.c: Update. * guile/scm-lazy-string.c: Update. * guile/scm-math.c: Update. * guile/scm-param.c: Update. * guile/scm-ports.c: Update. * guile/scm-pretty-print.c: Update. * guile/scm-symbol.c: Update. * guile/scm-symtab.c: Update. * guile/scm-type.c: Update. * guile/scm-value.c: Update. * i386-linux-tdep.c: Update. * i386-tdep.c: Update. * inf-loop.c: Update. * infcall.c: Update. * infcmd.c: Update. * infrun.c: Update. * jit.c: Update. * language.c: Update. * linespec.c: Update. * linux-fork.c: Update. * linux-nat.c: Update. * linux-tdep.c: Update. * linux-thread-db.c: Update. * main.c: Update. * mi/mi-cmd-break.c: Update. * mi/mi-cmd-stack.c: Update. * mi/mi-interp.c: Update. * mi/mi-main.c: Update. * objc-lang.c: Update. * p-valprint.c: Update. * parse.c: Update. * ppc-linux-tdep.c: Update. * printcmd.c: Update. * python/py-arch.c: Update. * python/py-breakpoint.c: Update. * python/py-cmd.c: Update. * python/py-finishbreakpoint.c: Update. * python/py-frame.c: Update. * python/py-framefilter.c: Update. * python/py-gdb-readline.c: Update. * python/py-inferior.c: Update. * python/py-infthread.c: Update. * python/py-lazy-string.c: Update. * python/py-linetable.c: Update. * python/py-objfile.c: Update. * python/py-param.c: Update. * python/py-prettyprint.c: Update. * python/py-progspace.c: Update. * python/py-record-btrace.c: Update. * python/py-record.c: Update. * python/py-symbol.c: Update. * python/py-type.c: Update. * python/py-unwind.c: Update. * python/py-utils.c: Update. * python/py-value.c: Update. * python/python.c: Update. * record-btrace.c: Update. * record-full.c: Update. * remote-fileio.c: Update. * remote.c: Update. * riscv-tdep.c: Update. * rs6000-aix-tdep.c: Update. * rs6000-tdep.c: Update. * rust-exp.y: Update. * rust-lang.c: Update. * s390-tdep.c: Update. * selftest-arch.c: Update. * solib-dsbt.c: Update. * solib-frv.c: Update. * solib-spu.c: Update. * solib-svr4.c: Update. * solib.c: Update. * sparc64-linux-tdep.c: Update. * stack.c: Update. * symfile-mem.c: Update. * symmisc.c: Update. * target.c: Update. * thread.c: Update. * top.c: Update. * tracefile-tfile.c: Update. * tui/tui.c: Update. * typeprint.c: Update. * unittests/cli-utils-selftests.c: Update. * unittests/parse-connection-spec-selftests.c: Update. * valops.c: Update. * valprint.c: Update. * value.c: Update. * varobj.c: Update. * windows-nat.c: Update. * x86-linux-nat.c: Update. * xml-support.c: Update. gdb/gdbserver/ChangeLog 2019-04-08 Tom Tromey <tom@tromey.com> * gdbreplay.c: Update. * linux-low.c: Update. * server.c: Update.
2019-04-03 23:59:07 +02:00
catch (const gdb_exception &ex)
Split TRY_CATCH into TRY + CATCH This patch splits the TRY_CATCH macro into three, so that we go from this: ~~~ volatile gdb_exception ex; TRY_CATCH (ex, RETURN_MASK_ERROR) { } if (ex.reason < 0) { } ~~~ to this: ~~~ TRY { } CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH ~~~ Thus, we'll be getting rid of the local volatile exception object, and declaring the caught exception in the catch block. This allows reimplementing TRY/CATCH in terms of C++ exceptions when building in C++ mode, while still allowing to build GDB in C mode (using setjmp/longjmp), as a transition step. TBC, after this patch, is it _not_ valid to have code between the TRY and the CATCH blocks, like: TRY { } // some code here. CATCH (ex, RETURN_MASK_ERROR) { } END_CATCH Just like it isn't valid to do that with C++'s native try/catch. By switching to creating the exception object inside the CATCH block scope, we can get rid of all the explicitly allocated volatile exception objects all over the tree, and map the CATCH block more directly to C++'s catch blocks. The majority of the TRY_CATCH -> TRY+CATCH+END_CATCH conversion was done with a script, rerun from scratch at every rebase, no manual editing involved. After the mechanical conversion, a few places needed manual intervention, to fix preexisting cases where we were using the exception object outside of the TRY_CATCH block, and cases where we were using "else" after a 'if (ex.reason) < 0)' [a CATCH after this patch]. The result was folded into this patch so that GDB still builds at each incremental step. END_CATCH is necessary for two reasons: First, because we name the exception object in the CATCH block, which requires creating a scope, which in turn must be closed somewhere. Declaring the exception variable in the initializer field of a for block, like: #define CATCH(EXCEPTION, mask) \ for (struct gdb_exception EXCEPTION; \ exceptions_state_mc_catch (&EXCEPTION, MASK); \ EXCEPTION = exception_none) would avoid needing END_CATCH, but alas, in C mode, we build with C90, which doesn't allow mixed declarations and code. Second, because when TRY/CATCH are wired to real C++ try/catch, as long as we need to handle cleanup chains, even if there's no CATCH block that wants to catch the exception, we need for stop at every frame in the unwind chain and run cleanups, then rethrow. That will be done in END_CATCH. After we require C++, we'll still need TRY/CATCH/END_CATCH until cleanups are completely phased out -- TRY/CATCH in C++ mode will save/restore the current cleanup chain, like in C mode, and END_CATCH catches otherwise uncaugh exceptions, runs cleanups and rethrows, so that C++ cleanups and exceptions can coexist. IMO, this still makes the TRY/CATCH code look a bit more like a newcomer would expect, so IMO worth it even if we weren't considering C++. gdb/ChangeLog. 2015-03-07 Pedro Alves <palves@redhat.com> * common/common-exceptions.c (struct catcher) <exception>: No longer a pointer to volatile exception. Now an exception value. <mask>: Delete field. (exceptions_state_mc_init): Remove all parameters. Adjust. (exceptions_state_mc): No longer pop the catcher here. (exceptions_state_mc_catch): New function. (throw_exception): Adjust. * common/common-exceptions.h (exceptions_state_mc_init): Remove all parameters. (exceptions_state_mc_catch): Declare. (TRY_CATCH): Rename to ... (TRY): ... this. Remove EXCEPTION and MASK parameters. (CATCH, END_CATCH): New. All callers adjusted. gdb/gdbserver/ChangeLog: 2015-03-07 Pedro Alves <palves@redhat.com> Adjust all callers of TRY_CATCH to use TRY/CATCH/END_CATCH instead.
2015-03-07 16:14:14 +01:00
{
exception_print (gdb_stderr, ex);
}
1999-06-21 15:27:42 +02:00
exit (exit_code);
}
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
/* The value of the "interactive-mode" setting. */
static enum auto_boolean interactive_mode = AUTO_BOOLEAN_AUTO;
1999-06-21 15:27:42 +02:00
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
/* Implement the "show interactive-mode" option. */
static void
show_interactive_mode (struct ui_file *file, int from_tty,
struct cmd_list_element *c,
const char *value)
1999-06-21 15:27:42 +02:00
{
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
if (interactive_mode == AUTO_BOOLEAN_AUTO)
fprintf_filtered (file, "Debugger's interactive mode "
"is %s (currently %s).\n",
Fix PR20494 - User input stops being echoed in CLI This patch fixes a problem that problem triggers if you start an inferior, e.g., with the "start" command, in a UI created with the new-ui command, and then run a foreground execution command in the main UI. Once the program stops for the latter command, typing in the main UI no longer echoes back to the user. The problem revolves around this: - gdb_has_a_terminal computes its result lazily, on first call. that is what saves gdb's initial main UI terminal state (the UI associated with stdin): our_terminal_info.ttystate = serial_get_tty_state (stdin_serial); This is the state that target_terminal_ours() restores. - In this scenario, the gdb_has_a_terminal function happens to be first ever called from within the target_terminal_init call in startup_inferior: (top-gdb) bt #0 gdb_has_a_terminal () at src/gdb/inflow.c:157 #1 0x000000000079db22 in child_terminal_init_with_pgrp () at src/gdb/inflow.c:217 [...] #4 0x000000000065bacb in target_terminal_init () at src/gdb/target.c:456 #5 0x00000000004676d2 in startup_inferior () at src/gdb/fork-child.c:531 [...] #7 0x000000000046b168 in linux_nat_create_inferior () at src/gdb/linux-nat.c:1112 [...] #9 0x00000000005f20c9 in start_command (args=0x0, from_tty=1) at src/gdb/infcmd.c:657 If the command to start the inferior is issued on the main UI, then readline will have deprepped the terminal when we reach the above, and the problem doesn't appear. If however the command is issued on a non-main UI, then when we reach that gdb_has_a_terminal call, the main UI's terminal state is still set to whatever readline has sets it to in rl_prep_terminal, which happens to have echo disabled. Later, when the following synchronous execution command finishes, we'll call target_terminal_ours to restore gdb's the main UI's terminal settings, and that restores the terminal state with echo disabled... Conceptually, the fix is to move the gdb_has_a_terminal call earlier, to someplace during GDB initialization, before readline/ncurses have had a chance to change terminal settings. Turns out that "set_initial_gdb_ttystate" is exactly such a place. I say conceptually, because the fix actually inlines the gdb_has_a_terminal part that saves the terminal state in set_initial_gdb_ttystate and then simplifies gdb_has_a_terminal, since there's no point in making gdb_has_a_terminal do lazy computation. gdb/ChangeLog: 2016-08-23 Pedro Alves <palves@redhat.com> PR gdb/20494 * inflow.c (our_terminal_info, initial_gdb_ttystate): Update comments. (enum gdb_has_a_terminal_flag_enum, gdb_has_a_terminal_flag): Delete. (set_initial_gdb_ttystate): Record our_terminal_info here too, instead of ... (gdb_has_a_terminal): ... here. Reimplement in terms of initial_gdb_ttystate. Make static. * terminal.h (gdb_has_a_terminal): Delete declaration. (set_initial_gdb_ttystate): Add comment. * top.c (show_interactive_mode): Use input_interactive_p instead of gdb_has_a_terminal. gdb/testsuite/ChangeLog: 2016-08-23 Pedro Alves <palves@redhat.com> PR gdb/20494 * gdb.base/new-ui-echo.c: New file. * gdb.base/new-ui-echo.exp: New file.
2016-08-23 17:03:28 +02:00
value, input_interactive_p (current_ui) ? "on" : "off");
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
else
fprintf_filtered (file, "Debugger's interactive mode is %s.\n", value);
}
/* Returns whether GDB is running on an interactive terminal. */
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
int
input_interactive_p (struct ui *ui)
{
if (batch_flag)
return 0;
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
if (interactive_mode != AUTO_BOOLEAN_AUTO)
return interactive_mode == AUTO_BOOLEAN_TRUE;
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
return ui->input_interactive_p;
1999-06-21 15:27:42 +02:00
}
static void
Constify add_com This changes add_com to take a cmd_const_cfunc_ftype, and then fixes up all the command implementations. In most cases this is trivial. In a couple of places I had to again introduce a temporary non-const overload. These overloads will be removed when add_info is constified. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * solib.h (no_shared_libraries): Constify. * frame.h (return_command): Constify. * cli/cli-cmds.h (quit_command): Constify. * top.h (quit_command, execute_command): Constify. * target.h (flash_erase_command): Constify. * inferior.h (set_inferior_args, attach_command): Constify. * tracepoint.h (start_tracing, stop_tracing): Constify. * breakpoint.h (break_command, tbreak_command) (hbreak_command_wrapper, thbreak_command_wrapper) (rbreak_command_wrapper, watch_command_wrapper) (awatch_command_wrapper, rwatch_command_wrapper) (get_tracepoint_by_number): Constify. * symtab.c (info_variables_command, rbreak_command) (symtab_symbol_info): Constify. (info_variables_command): Add non-const overload. * top.c (dont_repeat_command): Constify. * breakpoint.c (ignore_command, commands_command) (condition_command, tbreak_command, hbreak_command) (thbreak_command, clear_command, break_command) (info_breakpoints_command, watch_command, rwatch_command) (awatch_command, trace_command, ftrace_command, strace_command) (trace_pass_command, break_range_command, dprintf_command) (agent_printf_command, get_tracepoint_by_number) (watch_maybe_just_location, trace_pass_command): Constify. (info_breakpoints_command): Add non-const overload. * tracefile.c (tsave_command): Constify. * infcmd.c (attach_command, disconnect_command, signal_command) (queue_signal_command, stepi_command, nexti_command) (finish_command, next_command, step_command, until_command) (advance_command, jump_command, continue_command, run_command) (start_command, starti_command, interrupt_command) (run_command_1, set_inferior_args, step_1): Constify. * inferior.c (add_inferior_command, remove_inferior_command) (clone_inferior_command): Constify. * linux-fork.c (checkpoint_command, restart_command): Constify. * windows-nat.c (signal_event_command): Constify. * guile/guile.c (guile_repl_command, guile_command): Constify. * printcmd.c (x_command, display_command, printf_command) (output_command, set_command, call_command, print_command) (eval_command): Constify. (non_const_set_command): Remove. (_initialize_printcmd): Update. * source.c (forward_search_command, reverse_search_command): Constify. * jit.c (jit_reader_load_command, jit_reader_unload_command): Constify. * infrun.c (handle_command): Constify. * memattr.c (mem_command): Constify. * stack.c (return_command, up_command, up_silently_command) (down_command, down_silently_command, frame_command) (backtrace_command, func_command, backtrace_command_1): Constify. (backtrace_command): Add non-const overload. * remote-sim.c (simulator_command): Constify. * exec.c (set_section_command): Constify. * tracepoint.c (tdump_command, trace_variable_command) (tstatus_command, tstop_command, tstart_command) (end_actions_pseudocommand, while_stepping_pseudocommand) (collect_pseudocommand, teval_pseudocommand, actions_command) (start_tracing, stop_tracing): Constify. * value.c (init_if_undefined_command): Constify. * tui/tui-stack.c (tui_update_command): Constify. * tui/tui-win.c (tui_refresh_all_command) (tui_set_tab_width_command, tui_set_win_height_command) (tui_set_focus_command, tui_scroll_forward_command) (tui_scroll_backward_command, tui_scroll_left_command) (tui_scroll_right_command, parse_scrolling_args, tui_set_focus) (tui_set_win_height): Constify. * tui/tui-layout.c (tui_layout_command): Constify. * procfs.c (proc_trace_syscalls, proc_trace_sysentry_cmd) (proc_trace_sysexit_cmd, proc_untrace_sysentry_cmd) (proc_untrace_sysexit_cmd): Constify. * remote.c (threadlist_test_cmd, threadinfo_test_cmd) (threadset_test_cmd, threadlist_update_test_cmd) (threadalive_test): Constify. * objc-lang.c (print_object_command): Constify. * command.h (add_com): Constify. * cli/cli-dump.c (restore_command): Constify. * cli/cli-cmds.c (pwd_command, echo_command, quit_command) (help_command, complete_command, shell_command, edit_command) (list_command, disassemble_command, make_command) (apropos_command, alias_command): Constify. * cli/cli-script.c (document_command, define_command) (while_command, if_command, validate_comname): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * target.c (do_monitor_command, flash_erase_command): Constify. * regcache.c (reg_flush_command): Constify. * reverse.c (reverse_step, reverse_next, reverse_stepi) (reverse_nexti, reverse_continue, reverse_finish) (save_bookmark_command, goto_bookmark_command) (exec_reverse_once): Constify. * python/python.c (python_interactive_command, python_command): Constify. * typeprint.c (ptype_command, whatis_command, whatis_exp): Constify. * solib.c (sharedlibrary_command, no_shared_libraries): Constify. * gcore.c (gcore_command): Constify.
2017-10-11 23:43:01 +02:00
dont_repeat_command (const char *ignored, int from_tty)
1999-06-21 15:27:42 +02:00
{
/* Can't call dont_repeat here because we're not necessarily reading
from stdin. */
*saved_command_line = 0;
1999-06-21 15:27:42 +02:00
}
/* Functions to manipulate command line editing control variables. */
/* Number of commands to print in each call to show_commands. */
#define Hist_print 10
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
void
show_commands (const char *args, int from_tty)
1999-06-21 15:27:42 +02:00
{
/* Index for history commands. Relative to history_base. */
int offset;
/* Number of the history entry which we are planning to display next.
Relative to history_base. */
static int num = 0;
/* Print out some of the commands from the command history. */
if (args)
{
if (args[0] == '+' && args[1] == '\0')
/* "info editing +" should print from the stored position. */
;
else
/* "info editing <exp>" should print around command number <exp>. */
num = (parse_and_eval_long (args) - history_base) - Hist_print / 2;
1999-06-21 15:27:42 +02:00
}
/* "show commands" means print the last Hist_print commands. */
else
{
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
num = history_length - Hist_print;
1999-06-21 15:27:42 +02:00
}
if (num < 0)
num = 0;
/* If there are at least Hist_print commands, we want to display the last
Hist_print rather than, say, the last 6. */
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
if (history_length - num < Hist_print)
1999-06-21 15:27:42 +02:00
{
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
num = history_length - Hist_print;
1999-06-21 15:27:42 +02:00
if (num < 0)
num = 0;
}
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
for (offset = num;
offset < num + Hist_print && offset < history_length;
offset++)
1999-06-21 15:27:42 +02:00
{
printf_filtered ("%5d %s\n", history_base + offset,
1999-07-07 22:19:36 +02:00
(history_get (history_base + offset))->line);
1999-06-21 15:27:42 +02:00
}
/* The next command we want to display is the next one that we haven't
displayed yet. */
num += Hist_print;
/* If the user repeats this command with return, it should do what
"show commands +" does. This is unnecessary if arg is null,
because "show commands +" is not useful after "show commands". */
if (from_tty && args)
set_repeat_arguments ("+");
1999-06-21 15:27:42 +02:00
}
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
/* Update the size of our command history file to HISTORY_SIZE.
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
A HISTORY_SIZE of -1 stands for unlimited. */
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
static void
set_readline_history_size (int history_size)
{
gdb_assert (history_size >= -1);
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
if (history_size == -1)
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
unstifle_history ();
else
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
stifle_history (history_size);
}
/* Called by do_setshow_command. */
static void
Constify add_setshow_* This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify.
2017-10-14 17:07:00 +02:00
set_history_size_command (const char *args,
int from_tty, struct cmd_list_element *c)
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
{
set_readline_history_size (history_size_setshow_var);
1999-06-21 15:27:42 +02:00
}
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
void
Constify add_prefix_cmd This changes add_prefix_cmd to accept a const-taking function as an argument; then fixes up all the callers. In a couple of spots I had to add a non-const overload of a function, because the function is passed to two different command-adding "constructors". These overloads are temporary; once constification is complete they can be removed. This patch also fixes a typo I happened to notice while constifying. Note that this touches a couple of files (gnu-nat.c and go32-nat.c) that I can't build. So, while I made a best-effort there, I am not certain they will still compile. Tested by rebuilding. gdb/ChangeLog 2017-10-11 Tom Tromey <tom@tromey.com> * gdbthread.h (thread_command): Constify. * inferior.h (detach_command): Constify. * top.h (set_history, show_history): Constify. * arm-tdep.c (set_arm_command, show_arm_command): Constify. * serial.c (serial_set_cmd, serial_show_cmd): Constify. * bsd-kvm.c (bsd_kvm_cmd): Constify. * printcmd.c (set_command): Constify. (non_const_set_command): New function. * dcache.c (set_dcache_command, show_dcache_command): Constify. * breakpoint.c (enable_command, disable_command, delete_command) (catch_command, tcatch_command, set_breakpoint_cmd) (show_breakpoint_cmd): Constify. * macrocmd.c (macro_command): Constify. * infcmd.c (unset_command, kill_command, detach_command) (info_proc_cmd): Constify. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify. * auto-load.c (show_auto_load_cmd, set_auto_load_cmd) (info_auto_load_cmd): Constify. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Constify. * ada-lang.c (set_ada_command, show_ada_command) (maint_set_ada_cmd, maint_show_ada_cmd): Constify. * guile/guile.c (set_guile_command, show_guile_command) (info_guile_command): Constify. * tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd): Constify. * skip.c (skip_command): Constify. * compile/compile.c (_initialize_compile): Constify. * dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd): Constify. * remote.c (set_remote_cmd, show_remote_cmd, remote_command): Constify. * python/python.c (user_show_python, user_set_python): Constify. * mips-tdep.c (set_mips_command, show_mips_command) (set_mipsfpu_command): Constify. * record-btrace.c (cmd_record_btrace_start) (cmd_set_record_btrace, cmd_show_record_btrace) (cmd_set_record_btrace_bts, cmd_show_record_btrace_bts) (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command): Constify. * symfile.c (overlay_command): Constify. * spu-tdep.c (set_spu_command, show_spu_command): Constify. * cli/cli-logging.c (set_logging_command, show_logging_command): Constify. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * cli/cli-cmds.c (info_command, show_command, set_debug) (show_debug): Constify. (show_command): Add non-const overload. * top.c (set_history, show_history): Constify. * sh-tdep.c (set_sh_command, show_sh_command): Constify. * command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype. * target.c (target_command): Constify. * sparc64-tdep.c (info_adi_command): Constify. * record-full.c (cmd_record_full_start): Constify. (set_record_full_command): Constify. Fix typo. (show_record_full_command): Constify. * thread.c (thread_command, thread_apply_command): Constify. * memattr.c (dummy_cmd): Constify. * value.c (function_command): Constify. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify. * probe.c (info_probes_command): Constify. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify. * gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd) (show_thread_cmd, set_thread_default_cmd) (show_thread_default_cmd): Constify. (check_empty): Constify. * tracepoint.c (tfind_command): Constify. * cp-support.c (maint_cplus_command): Constify. * windows-tdep.c (info_w32_command): Constify. * record.c (cmd_record_start, set_record_command) (show_record_command, info_record_command, cmd_record_goto): Constify. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Constify. * utils.c (set_internal_problem_cmd, show_internal_problem_cmd): Constify. (add_internal_problem_command): Remove casts. * arc-tdep.c (maintenance_print_arc_command): Constify. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Constify. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd) (maintenance_show_cmd, set_per_command_cmd) (show_per_command_cmd, maintenance_check_command): Constify. * language.c (set_check, show_check): Constify. * typeprint.c (show_print_type, set_print_type): Constify. * go32-nat.c (go32_info_dos_command): Constify.
2017-09-26 06:28:30 +02:00
set_history (const char *args, int from_tty)
1999-06-21 15:27:42 +02:00
{
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
printf_unfiltered (_("\"set history\" must be followed "
"by the name of a history subcommand.\n"));
make calls to help_list use enumerator Currently there are many calls to help_list that pass the constant -1 as the "class" value. However, the parameter is declared as being of type enum command_class, and uses of the constant violate this abstraction. This patch fixes the error everywhere it occurs in the gdb sources. Tested by rebuilding. 2014-06-13 Tom Tromey <tromey@redhat.com> * cp-support.c (maint_cplus_command): Pass all_commands, not -1, to help_list. * guile/guile.c (info_guile_command): Pass all_commands, not -1, to help_list. * tui/tui-win.c (tui_command): Pass all_commands, not -1, to help_list. * tui/tui-regs.c (tui_reg_command): Pass all_commands, not -1, to help_list.Pass all_commands, not -1, to help_list. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, tekhex_dump_command) (binary_dump_command, binary_append_command): Pass all_commands, not -1, to help_list. * cli/cli-cmds.c (info_command, set_debug): Pass all_commands, not -1, to help_list. * valprint.c (set_print, set_print_raw): Pass all_commands, not -1, to help_list. * typeprint.c (set_print_type): Pass all_commands, not -1, to help_list. * top.c (set_history): Pass all_commands, not -1, to help_list. * target-descriptions.c (set_tdesc_cmd, unset_tdesc_cmd): Pass all_commands, not -1, to help_list. * symfile.c (overlay_command): Pass all_commands, not -1, to help_list. * spu-tdep.c (info_spu_command): Pass all_commands, not -1, to help_list. * serial.c (serial_set_cmd): Pass all_commands, not -1, to help_list. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Pass all_commands, not -1, to help_list. * remote.c (remote_command, set_remote_cmd): Pass all_commands, not -1, to help_list. * ravenscar-thread.c (set_ravenscar_command): Pass all_commands, not -1, to help_list. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd): Pass all_commands, not -1, to help_list. * macrocmd.c (macro_command): Pass all_commands, not -1, to help_list. * language.c (set_check): Pass all_commands, not -1, to help_list. * infcmd.c (unset_command): Pass all_commands, not -1, to help_list. * frame.c (set_backtrace_cmd): Pass all_commands, not -1, to help_list. * dwarf2read.c (set_dwarf2_cmd): Pass all_commands, not -1, to help_list. * dcache.c (set_dcache_command): Pass all_commands, not -1, to help_list. * breakpoint.c (save_command): Pass all_commands, not -1, to help_list. * ada-lang.c (maint_set_ada_cmd, set_ada_command): Pass all_commands, not -1, to help_list.
2014-06-05 16:25:00 +02:00
help_list (sethistlist, "set history ", all_commands, gdb_stdout);
1999-06-21 15:27:42 +02:00
}
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
void
Constify add_prefix_cmd This changes add_prefix_cmd to accept a const-taking function as an argument; then fixes up all the callers. In a couple of spots I had to add a non-const overload of a function, because the function is passed to two different command-adding "constructors". These overloads are temporary; once constification is complete they can be removed. This patch also fixes a typo I happened to notice while constifying. Note that this touches a couple of files (gnu-nat.c and go32-nat.c) that I can't build. So, while I made a best-effort there, I am not certain they will still compile. Tested by rebuilding. gdb/ChangeLog 2017-10-11 Tom Tromey <tom@tromey.com> * gdbthread.h (thread_command): Constify. * inferior.h (detach_command): Constify. * top.h (set_history, show_history): Constify. * arm-tdep.c (set_arm_command, show_arm_command): Constify. * serial.c (serial_set_cmd, serial_show_cmd): Constify. * bsd-kvm.c (bsd_kvm_cmd): Constify. * printcmd.c (set_command): Constify. (non_const_set_command): New function. * dcache.c (set_dcache_command, show_dcache_command): Constify. * breakpoint.c (enable_command, disable_command, delete_command) (catch_command, tcatch_command, set_breakpoint_cmd) (show_breakpoint_cmd): Constify. * macrocmd.c (macro_command): Constify. * infcmd.c (unset_command, kill_command, detach_command) (info_proc_cmd): Constify. * i386-tdep.c (set_mpx_cmd, show_mpx_cmd): Constify. * auto-load.c (show_auto_load_cmd, set_auto_load_cmd) (info_auto_load_cmd): Constify. * target-descriptions.c (set_tdesc_cmd, show_tdesc_cmd) (unset_tdesc_cmd): Constify. * ada-lang.c (set_ada_command, show_ada_command) (maint_set_ada_cmd, maint_show_ada_cmd): Constify. * guile/guile.c (set_guile_command, show_guile_command) (info_guile_command): Constify. * tui/tui-win.c (tui_command, set_tui_cmd, show_tui_cmd): Constify. * skip.c (skip_command): Constify. * compile/compile.c (_initialize_compile): Constify. * dwarf2read.c (set_dwarf_cmd, show_dwarf_cmd): Constify. * btrace.c (maint_btrace_cmd, maint_btrace_set_cmd) (maint_btrace_show_cmd, maint_btrace_pt_set_cmd) (maint_btrace_pt_show_cmd): Constify. * remote.c (set_remote_cmd, show_remote_cmd, remote_command): Constify. * python/python.c (user_show_python, user_set_python): Constify. * mips-tdep.c (set_mips_command, show_mips_command) (set_mipsfpu_command): Constify. * record-btrace.c (cmd_record_btrace_start) (cmd_set_record_btrace, cmd_show_record_btrace) (cmd_set_record_btrace_bts, cmd_show_record_btrace_bts) (cmd_set_record_btrace_pt, cmd_show_record_btrace_pt): Constify. * rs6000-tdep.c (set_powerpc_command, show_powerpc_command): Constify. * symfile.c (overlay_command): Constify. * spu-tdep.c (set_spu_command, show_spu_command): Constify. * cli/cli-logging.c (set_logging_command, show_logging_command): Constify. * cli/cli-dump.c (dump_command, append_command) (srec_dump_command, ihex_dump_command, verilog_dump_command) (tekhex_dump_command, binary_dump_command) (binary_append_command): Constify. * cli/cli-decode.c (struct cmd_list_element): Change type of "fun". * cli/cli-cmds.c (info_command, show_command, set_debug) (show_debug): Constify. (show_command): Add non-const overload. * top.c (set_history, show_history): Constify. * sh-tdep.c (set_sh_command, show_sh_command): Constify. * command.h (add_prefix_cmd): Accept a cmd_const_cfunc_ftype. * target.c (target_command): Constify. * sparc64-tdep.c (info_adi_command): Constify. * record-full.c (cmd_record_full_start): Constify. (set_record_full_command): Constify. Fix typo. (show_record_full_command): Constify. * thread.c (thread_command, thread_apply_command): Constify. * memattr.c (dummy_cmd): Constify. * value.c (function_command): Constify. * frame.c (set_backtrace_cmd, show_backtrace_cmd): Constify. * probe.c (info_probes_command): Constify. * ser-tcp.c (set_tcp_cmd, show_tcp_cmd): Constify. * gnu-nat.c (set_task_cmd, show_task_cmd, set_thread_cmd) (show_thread_cmd, set_thread_default_cmd) (show_thread_default_cmd): Constify. (check_empty): Constify. * tracepoint.c (tfind_command): Constify. * cp-support.c (maint_cplus_command): Constify. * windows-tdep.c (info_w32_command): Constify. * record.c (cmd_record_start, set_record_command) (show_record_command, info_record_command, cmd_record_goto): Constify. * ravenscar-thread.c (set_ravenscar_command) (show_ravenscar_command): Constify. * utils.c (set_internal_problem_cmd, show_internal_problem_cmd): Constify. (add_internal_problem_command): Remove casts. * arc-tdep.c (maintenance_print_arc_command): Constify. * valprint.c (set_print, show_print, set_print_raw) (show_print_raw): Constify. * maint.c (maintenance_command, maintenance_info_command) (maintenance_print_command, maintenance_set_cmd) (maintenance_show_cmd, set_per_command_cmd) (show_per_command_cmd, maintenance_check_command): Constify. * language.c (set_check, show_check): Constify. * typeprint.c (show_print_type, set_print_type): Constify. * go32-nat.c (go32_info_dos_command): Constify.
2017-09-26 06:28:30 +02:00
show_history (const char *args, int from_tty)
1999-06-21 15:27:42 +02:00
{
cmd_show_list (showhistlist, from_tty, "");
}
Change boolean options to bool instead of int This is for add_setshow_boolean_cmd as well as the gdb::option interface. gdb/ChangeLog: 2019-09-17 Christian Biesinger <cbiesinger@google.com> * ada-lang.c (ada_ignore_descriptive_types_p): Change to bool. (print_signatures): Likewise. (trust_pad_over_xvs): Likewise. * arch/aarch64-insn.c (aarch64_debug): Likewise. * arch/aarch64-insn.h (aarch64_debug): Likewise. * arm-linux-nat.c (arm_apcs_32): Likewise. * arm-linux-tdep.c (arm_apcs_32): Likewise. * arm-nbsd-nat.c (arm_apcs_32): Likewise. * arm-tdep.c (arm_debug): Likewise. (arm_apcs_32): Likewise. * auto-load.c (debug_auto_load): Likewise. (auto_load_gdb_scripts): Likewise. (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * auto-load.h (global_auto_load): Likewise. (auto_load_local_gdbinit): Likewise. (auto_load_local_gdbinit_loaded): Likewise. * breakpoint.c (disconnected_dprintf): Likewise. (breakpoint_proceeded): Likewise. (automatic_hardware_breakpoints): Likewise. (always_inserted_mode): Likewise. (target_exact_watchpoints): Likewise. (_initialize_breakpoint): Update. * breakpoint.h (target_exact_watchpoints): Change to bool. * btrace.c (maint_btrace_pt_skip_pad): Likewise. * cli/cli-cmds.c (trace_commands): Likewise. * cli/cli-cmds.h (trace_commands): Likewise. * cli/cli-decode.c (add_setshow_boolean_cmd): Change int* argument to bool*. * cli/cli-logging.c (logging_overwrite): Change to bool. (logging_redirect): Likewise. (debug_redirect): Likewise. * cli/cli-option.h (option_def) <boolean>: Change return type to bool*. (struct boolean_option_def) <get_var_address_cb_>: Change return type to bool. <boolean_option_def>: Update. (struct flag_option_def): Change default type of Context to bool from int. <flag_option_def>: Change return type of var_address_cb_ to bool*. * cli/cli-setshow.c (do_set_command): Cast to bool* instead of int*. (get_setshow_command_value_string): Likewise. * cli/cli-style.c (cli_styling): Change to bool. (source_styling): Likewise. * cli/cli-style.h (source_styling): Likewise. (cli_styling): Likewise. * cli/cli-utils.h (struct qcs_flags) <quiet, cont, silent>: Change to bool. * command.h (var_types): Update comment. (add_setshow_boolean_cmd): Change int* var argument to bool*. * compile/compile-cplus-types.c (debug_compile_cplus_types): Change to bool. (debug_compile_cplus_scopes): Likewise. * compile/compile-internal.h (compile_debug): Likewise. * compile/compile.c (compile_debug): Likewise. (struct compile_options) <raw>: Likewise. * cp-support.c (catch_demangler_crashes): Likewise. * cris-tdep.c (usr_cmd_cris_version_valid): Likewise. (usr_cmd_cris_dwarf2_cfi): Likewise. * csky-tdep.c (csky_debug): Likewise. * darwin-nat.c (enable_mach_exceptions): Likewise. * dcache.c (dcache_enabled_p): Likewise. * defs.h (info_verbose): Likewise. * demangle.c (demangle): Likewise. (asm_demangle): Likewise. * dwarf-index-cache.c (debug_index_cache): Likewise. * dwarf2-frame.c (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2-frame.h (dwarf2_frame_unwinders_enabled_p): Likewise. * dwarf2read.c (check_physname): Likewise. (use_deprecated_index_sections): Likewise. (dwarf_always_disassemble): Likewise. * eval.c (overload_resolution): Likewise. * event-top.c (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * event-top.h (set_editing_cmd_var): Likewise. (exec_done_display_p): Likewise. * exec.c (write_files): Likewise. * fbsd-nat.c (debug_fbsd_lwp): Likewise (debug_fbsd_nat): Likewise. * frame.h (struct frame_print_options) <print_raw_frame_arguments>: Likewise. (struct set_backtrace_options) <backtrace_past_main>: Likewise. <backtrace_past_entry> Likewise. * gdb-demangle.h (demangle): Likewise. (asm_demangle): Likewise. * gdb_bfd.c (bfd_sharing): Likewise. * gdbcore.h (write_files): Likewise. * gdbsupport/common-debug.c (show_debug_regs): Likewise. * gdbsupport/common-debug.h (show_debug_regs): Likewise. * gdbthread.h (print_thread_events): Likewise. * gdbtypes.c (opaque_type_resolution): Likewise. (strict_type_checking): Likewise. * gnu-nat.c (gnu_debug_flag): Likewise. * guile/scm-auto-load.c (auto_load_guile_scripts): Likewise. * guile/scm-param.c (pascm_variable): Add boolval. (add_setshow_generic): Update. (pascm_param_value): Update. (pascm_set_param_value_x): Update. * hppa-tdep.c (hppa_debug): Change to bool.. * infcall.c (may_call_functions_p): Likewise. (coerce_float_to_double_p): Likewise. (unwind_on_signal_p): Likewise. (unwind_on_terminating_exception_p): Likewise. * infcmd.c (startup_with_shell): Likewise. * inferior.c (print_inferior_events): Likewise. * inferior.h (startup_with_shell): Likewise. (print_inferior_events): Likewise. * infrun.c (step_stop_if_no_debug): Likewise. (detach_fork): Likewise. (debug_displaced): Likewise. (disable_randomization): Likewise. (non_stop): Likewise. (non_stop_1): Likewise. (observer_mode): Likewise. (observer_mode_1): Likewise. (set_observer_mode): Update. (sched_multi): Change to bool. * infrun.h (debug_displaced): Likewise. (sched_multi): Likewise. (step_stop_if_no_debug): Likewise. (non_stop): Likewise. (disable_randomization): Likewise. * linux-tdep.c (use_coredump_filter): Likewise. (dump_excluded_mappings): Likewise. * linux-thread-db.c (auto_load_thread_db): Likewise. (check_thread_db_on_load): Likewise. * main.c (captured_main_1): Update. * maint-test-options.c (struct test_options_opts) <flag_opt, xx1_opt, xx2_opt, boolean_opt>: Change to bool. * maint-test-settings.c (maintenance_test_settings_boolean): Likewise. * maint.c (maintenance_profile_p): Likewise. (per_command_time): Likewise. (per_command_space): Likewise. (per_command_symtab): Likewise. * memattr.c (inaccessible_by_default): Likewise. * mi/mi-main.c (mi_async): Likewise. (mi_async_1): Likewise. * mips-tdep.c (mips64_transfers_32bit_regs_p): Likewise. * nat/fork-inferior.h (startup_with_shell): Likewise. * nat/linux-namespaces.c (debug_linux_namespaces): Likewise. * nat/linux-namespaces.h (debug_linux_namespaces): Likewise. * nios2-tdep.c (nios2_debug): Likewise. * or1k-tdep.c (or1k_debug): Likewise. * parse.c (parser_debug): Likewise. * parser-defs.h (parser_debug): Likewise. * printcmd.c (print_symbol_filename): Likewise. * proc-api.c (procfs_trace): Likewise. * python/py-auto-load.c (auto_load_python_scripts): Likewise. * python/py-param.c (union parmpy_variable): Add "bool boolval" field. (set_parameter_value): Update. (add_setshow_generic): Update. * python/py-value.c (copy_py_bool_obj): Change argument from int* to bool*. * python/python.c (gdbpy_parameter_value): Cast to bool* instead of int*. * ravenscar-thread.c (ravenscar_task_support): Change to bool. * record-btrace.c (record_btrace_target::store_registers): Update. * record-full.c (record_full_memory_query): Change to bool. (record_full_stop_at_limit): Likewise. * record-full.h (record_full_memory_query): Likewise. * remote-notif.c (notif_debug): Likewise. * remote-notif.h (notif_debug): Likewise. * remote.c (use_range_stepping): Likewise. (interrupt_on_connect): Likewise. (remote_break): Likewise. * ser-tcp.c (tcp_auto_retry): Likewise. * ser-unix.c (serial_hwflow): Likewise. * skip.c (debug_skip): Likewise. * solib-aix.c (solib_aix_debug): Likewise. * spu-tdep.c (spu_stop_on_load_p): Likewise. (spu_auto_flush_cache_p): Likewise. * stack.c (struct backtrace_cmd_options) <full, no_filters, hide>: Likewise. (struct info_print_options) <quiet>: Likewise. * symfile-debug.c (debug_symfile): Likewise. * symfile.c (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symfile.h (auto_solib_add): Likewise. (separate_debug_file_debug): Likewise. * symtab.c (basenames_may_differ): Likewise. (struct filename_partial_match_opts) <dirname, basename>: Likewise. (struct info_print_options) <quiet, exclude_minsyms>: Likewise. (struct info_types_options) <quiet>: Likewise. * symtab.h (demangle): Likewise. (basenames_may_differ): Likewise. * target-dcache.c (stack_cache_enabled_1): Likewise. (code_cache_enabled_1): Likewise. * target.c (trust_readonly): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. (auto_connect_native_target): Likewise. (target_stop_and_wait): Update. (target_async_permitted): Change to bool. (target_async_permitted_1): Likewise. (may_write_registers_1): Likewise. (may_write_memory_1): Likewise. (may_insert_breakpoints_1): Likewise. (may_insert_tracepoints_1): Likewise. (may_insert_fast_tracepoints_1): Likewise. (may_stop_1): Likewise. * target.h (target_async_permitted): Likewise. (may_write_registers): Likewise. (may_write_memory): Likewise. (may_insert_breakpoints): Likewise. (may_insert_tracepoints): Likewise. (may_insert_fast_tracepoints): Likewise. (may_stop): Likewise. * thread.c (struct info_threads_opts) <show_global_ids>: Likewise. (make_thread_apply_all_options_def_group): Change argument from int* to bool*. (thread_apply_all_command): Update. (print_thread_events): Change to bool. * top.c (confirm): Likewise. (command_editing_p): Likewise. (history_expansion_p): Likewise. (write_history_p): Likewise. (info_verbose): Likewise. * top.h (confirm): Likewise. (history_expansion_p): Likewise. * tracepoint.c (disconnected_tracing): Likewise. (circular_trace_buffer): Likewise. * typeprint.c (print_methods): Likewise. (print_typedefs): Likewise. * utils.c (debug_timestamp): Likewise. (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * utils.h (sevenbit_strings): Likewise. (pagination_enabled): Likewise. * valops.c (overload_resolution): Likewise. * valprint.h (struct value_print_options) <prettyformat_arrays, prettyformat_structs, vtblprint, unionprint, addressprint, objectprint, stop_print_at_null, print_array_indexes, deref_ref, static_field_print, pascal_static_field_print, raw, summary, symbol_print, finish_print>: Likewise. * windows-nat.c (new_console): Likewise. (cygwin_exceptions): Likewise. (new_group): Likewise. (debug_exec): Likewise. (debug_events): Likewise. (debug_memory): Likewise. (debug_exceptions): Likewise. (useshell): Likewise. * windows-tdep.c (maint_display_all_tib): Likewise. * xml-support.c (debug_xml): Likewise.
2019-09-14 21:36:58 +02:00
bool info_verbose = false; /* Default verbose msgs off. */
1999-06-21 15:27:42 +02:00
Fix leak of set/show verbose doc, avoid xfree of static string In the tests py-pp-registration/gdb.log default/gdb.log foll-fork/gdb.log setshow/gdb.log break-interp/gdb.log Valgrind detects a leak of the doc strings for the set and show verbose cmd. Here is the stacktrace of the leaked set doc: ==25548== 15 bytes in 1 blocks are definitely lost in loss record 101 of 3,120 ==25548== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309) ==25548== by 0x409C27: xmalloc (common-utils.c:44) ==25548== by 0x778AF9: xstrdup (xstrdup.c:34) ==25548== by 0x3F860F: add_setshow_cmd_full(char const*, command_class, var_types, void*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**, cmd_list_element**, cmd_list_element**) [clone .constprop.10] (cli-decode.c:495) ==25548== by 0x3F8ADB: add_setshow_boolean_cmd(char const*, command_class, int*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**) (cli-decode.c:593) ==25548== by 0x3F7442: _initialize_cli_cmds() (cli-cmds.c:1768) ==25548== by 0x69EED3: initialize_all_files() (init.c:365) ==25548== by 0x658A84: gdb_init(char*) (top.c:2163) ==25548== by 0x5403E1: captured_main_1 (main.c:863) ==25548== by 0x5403E1: captured_main (main.c:1167) ==25548== by 0x5403E1: gdb_main(captured_main_args*) (main.c:1193) ==25548== by 0x289CA7: main (gdb.c:32) The leak is created by top.c set_verbose 'elaborate joke': the doc string is changed according to the verbosity: (gdb) help set verbose Set verbosity. (gdb) set verbose on (gdb) help set verbose Set verbose printing of informational messages. (gdb) set_verbose creates the leak as it replaces the string allocated in the above stacktrace by a static (non translated) string: ... if (info_verbose) { c->doc = "Set verbose printing of informational messages."; ... Also, this can possibly trigger a call to 'free' of a static string, as c->doc_allocated is kept true, while the string is not allocated anymore. This patch: * fixes the leak by freeing the previous docs if doc_allocated. * internationalize the messages. * properly sets doc_allocated to 0 once doc strings are static. gdb/ChangeLog 2018-12-28 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (set_verbose): Free previous docs if doc_allocated. Internationalize messages. Set doc_allocated to 0.
2018-12-28 12:19:59 +01:00
/* Called by do_set_command. An elaborate joke. */
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
void
Constify add_setshow_* This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify.
2017-10-14 17:07:00 +02:00
set_verbose (const char *args, int from_tty, struct cmd_list_element *c)
1999-06-21 15:27:42 +02:00
{
Constify strings in tracepoint.c, lookup_cmd and the completers. This is sort of a continuation of Keith's parse_exp_1 constification patch. It started out by undoing these bits: @@ -754,9 +754,12 @@ validate_actionline (char **line, struct tmp_p = p; for (loc = t->base.loc; loc; loc = loc->next) { - p = tmp_p; - exp = parse_exp_1 (&p, loc->address, + const char *q; + + q = tmp_p; + exp = parse_exp_1 (&q, loc->address, block_for_pc (loc->address), 1); + p = (char *) q; and progressively making more things const upwards, fixing fallout, rinse repeat, until GDB built again (--enable-targets=all). That ended up constifying lookup_cmd/add_cmd and (lots of) friends, and the completers. I didn't try to constify the command hooks themselves, because I know upfront there are commands that write to the command string argument, and I think I managed to stop at a nice non-hacky split point already. I think the only non-really-super-obvious changes are tracepoint.c:validate_actionline, and tracepoint.c:trace_dump_actions. The rest is just mostly about 'char *' => 'const char *', 'char **'=> 'const char **', and the occasional (e.g., deprecated_cmd_warning) case of 'char **'=> 'const char *', where/when I noticed that nothing actually cares about the pointer to pointer output. Tested on x86_64 Fedora 17, native and gdbserver. gdb/ 2013-03-13 Pedro Alves <palves@redhat.com> * ada-lang.c (struct add_partial_datum) <text, text0, word>: Make fields const. (ada_make_symbol_completion_list): Make "text0" parameter const. * ax-gdb.c (agent_eval_command_one): Make "exp" parameter const. * breakpoint.c (condition_completer): Make "text" and "word" parameters const. Adjust. (check_tracepoint_command): Adjust to validate_actionline prototype change. (catch_syscall_completer): Make "text" and "word" parameters const. * cli/cli-cmds.c (show_user): Make "comname" local const. (valid_command_p): Make "command" parameter const. (alias_command): Make "alias_prefix" and "command_prefix" locals const. * cli/cli-decode.c (add_cmd): Make "name" parameter const. (add_alias_cmd): Make "name" and "oldname" parameters const. Adjust. No longer make copy of OLDNAME. (add_prefix_cmd, add_abbrev_prefix_cmd, add_set_or_show_cmd) (add_setshow_cmd_full, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd) (delete_cmd, add_info, add_info_alias, add_com, add_com_alias): Make "name" parameter const. (help_cmd): Rename "command" parameter to "arg". New const local "command". (find_cmd): Make "command" parameter const. (lookup_cmd_1): Make "text" parameter pointer to const. Adjust to deprecated_cmd_warning prototype change. (undef_cmd_error): Make "cmdtype" parameter const. (lookup_cmd): Make "line" parameter const. (deprecated_cmd_warning): Change type of "text" parameter to pointer to const char, from pointer to pointer to char. Adjust. (lookup_cmd_composition): Make "text" parameter const. (complete_on_cmdlist, complete_on_enum): Make "text" and "word" parameters const. * cli/cli-decode.h (struct cmd_list_element) <name>: Make field const. * cli/cli-script.c (validate_comname): Make "tem" local const. (define_command): New const local "tem_c". Use it in calls to lookup_cmd. (document_command): Make "tem" and "comfull" locals const. (show_user_1): Make "prefix" and "name" parameters const. * cli-script.h (show_user_1): Make "prefix" and "name" parameters const. * command.h (add_cmd, add_alias_cmd, add_prefix_cmd) (add_abbrev_prefix_cmd, completer_ftype, lookup_cmd, lookup_cmd_1) (deprecated_cmd_warning, lookup_cmd_composition, add_com) (add_com_alias, add_info, add_info_alias, complete_on_cmdlist) (complete_on_enum, add_setshow_enum_cmd) (add_setshow_auto_boolean_cmd, add_setshow_boolean_cmd) (add_setshow_filename_cmd, add_setshow_string_cmd) (add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Change prototypes, constifying strings. * completer.c (noop_completer, filename_completer): Make "text" and "prefix" parameters const. (location_completer, expression_completer) (complete_line_internal): Make "text" and "prefix" parameters const and adjust. (command_completer, signal_completer): Make "text" and "prefix" parameters const. * completer.h (noop_completer, filename_completer) (expression_completer, location_completer, command_completer) (signal_completer): Change prototypes. * corefile.c (complete_set_gnutarget): Make "text" and "word" parameters const. * cp-abi.c (cp_abi_completer): Likewise. * expression.h (parse_expression_for_completion): Change prototype. * f-lang.c (f_make_symbol_completion_list): Make "text" and "word" parameters const. * infcmd.c (_initialize_infcmd): Make "cmd_name" local const. * infrun.c (handle_completer): Make "text" and "word" parameters const. * interps.c (interpreter_completer): Make "text" and "word" parameters const. * language.h (struct language_defn) <la_make_symbol_completion_list>: Make "text" and "word" parameters const. * parse.c (parse_exp_1): Move const hack to parse_exp_in_context. (parse_exp_in_context): Rename to ... (parse_exp_in_context_1): ... this. (parse_exp_in_context): Reimplement, with const hack from parse_exp_1. (parse_expression_for_completion): Make "string" parameter const. * printcmd.c (decode_format): Make "string_ptr" parameter pointer to pointer to const char. Adjust. (print_command_1): Make "exp" parameter const. (output_command): Rename to ... (output_command_const): ... this. Make "exp" parameter const. (output_command): Reimplement. (x_command): Adjust. (display_command): Rename "exp" parameter to "arg". New "exp" local, const version of "arg". * python/py-auto-load.c (gdbpy_initialize_auto_load): Make "cmd_name" local const. * python/py-cmd.c (cmdpy_destroyer): Cast const away in xfree call. (cmdpy_completer): Make "text" and "word" parameters const. (gdbpy_parse_command_name): Make "prefix_text2" local const. * python/py-param.c (add_setshow_generic): Make "tmp_name" local const. * remote.c (_initialize_remote): Make "cmd_name" local const. * symtab.c (language_search_unquoted_string): Make "text" and "p" parameters const. Adjust. (completion_list_add_fields): Make "sym_text", "text" and "word" parameters const. (struct add_name_data) <sym_text, text, word>: Make fields const. (default_make_symbol_completion_list_break_on): Make "text" and "word" parameters const. Adjust locals. (default_make_symbol_completion_list) (make_symbol_completion_list, make_symbol_completion_type) (make_symbol_completion_list_fn): Make "text" and "word" parameters const. (make_file_symbol_completion_list): Make "text", "word" and "srcfile" parameters const. Adjust locals. (add_filename_to_list): Make "text" and "word" parameters const. (struct add_partial_filename_data) <text, word>: Make fields const. (make_source_files_completion_list): Make "text" and "word" parameters const. * symtab.h (default_make_symbol_completion_list_break_on) (default_make_symbol_completion_list, make_symbol_completion_list) (make_symbol_completion_type enum type_code) (make_symbol_completion_list_fn make_file_symbol_completion_list) (make_source_files_completion_list): Change prototype. * top.c (execute_command): Adjust to pass pointer to pointer to const char to lookup_cmd, and to deprecated_cmd_warning prototype change. (set_verbose): Make "cmdname" local const. * tracepoint.c (decode_agent_options): Make "exp" parameter const, and adjust. (validate_actionline): Make "line" parameter a pointer to const char, and adjust. (encode_actions_1): Make "action_exp" local const, and adjust. (encode_actions): Adjust. (replace_comma): Delete. (trace_dump_actions): Make "action_exp" and "next_comma" locals const, and adjust. Don't frob the action string while splitting it at commas. Instead, make a copy of each split substring in turn. (trace_dump_command): Adjust to validate_actionline prototype change. * tracepoint.h (decode_agent_options, decode_agent_options) (encode_actions, validate_actionline): Change prototypes. * valprint.h (output_command): Delete declaration. (output_command_const): Declare. * value.c (function_destroyer): Cast const away in xfree call.
2013-03-13 19:34:55 +01:00
const char *cmdname = "verbose";
1999-06-21 15:27:42 +02:00
struct cmd_list_element *showcmd;
showcmd = lookup_cmd_1 (&cmdname, showlist, NULL, 1);
gdb_assert (showcmd != NULL && showcmd != CMD_LIST_AMBIGUOUS);
1999-06-21 15:27:42 +02:00
Fix leak of set/show verbose doc, avoid xfree of static string In the tests py-pp-registration/gdb.log default/gdb.log foll-fork/gdb.log setshow/gdb.log break-interp/gdb.log Valgrind detects a leak of the doc strings for the set and show verbose cmd. Here is the stacktrace of the leaked set doc: ==25548== 15 bytes in 1 blocks are definitely lost in loss record 101 of 3,120 ==25548== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309) ==25548== by 0x409C27: xmalloc (common-utils.c:44) ==25548== by 0x778AF9: xstrdup (xstrdup.c:34) ==25548== by 0x3F860F: add_setshow_cmd_full(char const*, command_class, var_types, void*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**, cmd_list_element**, cmd_list_element**) [clone .constprop.10] (cli-decode.c:495) ==25548== by 0x3F8ADB: add_setshow_boolean_cmd(char const*, command_class, int*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**) (cli-decode.c:593) ==25548== by 0x3F7442: _initialize_cli_cmds() (cli-cmds.c:1768) ==25548== by 0x69EED3: initialize_all_files() (init.c:365) ==25548== by 0x658A84: gdb_init(char*) (top.c:2163) ==25548== by 0x5403E1: captured_main_1 (main.c:863) ==25548== by 0x5403E1: captured_main (main.c:1167) ==25548== by 0x5403E1: gdb_main(captured_main_args*) (main.c:1193) ==25548== by 0x289CA7: main (gdb.c:32) The leak is created by top.c set_verbose 'elaborate joke': the doc string is changed according to the verbosity: (gdb) help set verbose Set verbosity. (gdb) set verbose on (gdb) help set verbose Set verbose printing of informational messages. (gdb) set_verbose creates the leak as it replaces the string allocated in the above stacktrace by a static (non translated) string: ... if (info_verbose) { c->doc = "Set verbose printing of informational messages."; ... Also, this can possibly trigger a call to 'free' of a static string, as c->doc_allocated is kept true, while the string is not allocated anymore. This patch: * fixes the leak by freeing the previous docs if doc_allocated. * internationalize the messages. * properly sets doc_allocated to 0 once doc strings are static. gdb/ChangeLog 2018-12-28 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (set_verbose): Free previous docs if doc_allocated. Internationalize messages. Set doc_allocated to 0.
2018-12-28 12:19:59 +01:00
if (c->doc && c->doc_allocated)
xfree ((char *) c->doc);
if (showcmd->doc && showcmd->doc_allocated)
xfree ((char *) showcmd->doc);
1999-06-21 15:27:42 +02:00
if (info_verbose)
{
Fix leak of set/show verbose doc, avoid xfree of static string In the tests py-pp-registration/gdb.log default/gdb.log foll-fork/gdb.log setshow/gdb.log break-interp/gdb.log Valgrind detects a leak of the doc strings for the set and show verbose cmd. Here is the stacktrace of the leaked set doc: ==25548== 15 bytes in 1 blocks are definitely lost in loss record 101 of 3,120 ==25548== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309) ==25548== by 0x409C27: xmalloc (common-utils.c:44) ==25548== by 0x778AF9: xstrdup (xstrdup.c:34) ==25548== by 0x3F860F: add_setshow_cmd_full(char const*, command_class, var_types, void*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**, cmd_list_element**, cmd_list_element**) [clone .constprop.10] (cli-decode.c:495) ==25548== by 0x3F8ADB: add_setshow_boolean_cmd(char const*, command_class, int*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**) (cli-decode.c:593) ==25548== by 0x3F7442: _initialize_cli_cmds() (cli-cmds.c:1768) ==25548== by 0x69EED3: initialize_all_files() (init.c:365) ==25548== by 0x658A84: gdb_init(char*) (top.c:2163) ==25548== by 0x5403E1: captured_main_1 (main.c:863) ==25548== by 0x5403E1: captured_main (main.c:1167) ==25548== by 0x5403E1: gdb_main(captured_main_args*) (main.c:1193) ==25548== by 0x289CA7: main (gdb.c:32) The leak is created by top.c set_verbose 'elaborate joke': the doc string is changed according to the verbosity: (gdb) help set verbose Set verbosity. (gdb) set verbose on (gdb) help set verbose Set verbose printing of informational messages. (gdb) set_verbose creates the leak as it replaces the string allocated in the above stacktrace by a static (non translated) string: ... if (info_verbose) { c->doc = "Set verbose printing of informational messages."; ... Also, this can possibly trigger a call to 'free' of a static string, as c->doc_allocated is kept true, while the string is not allocated anymore. This patch: * fixes the leak by freeing the previous docs if doc_allocated. * internationalize the messages. * properly sets doc_allocated to 0 once doc strings are static. gdb/ChangeLog 2018-12-28 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (set_verbose): Free previous docs if doc_allocated. Internationalize messages. Set doc_allocated to 0.
2018-12-28 12:19:59 +01:00
c->doc = _("Set verbose printing of informational messages.");
showcmd->doc = _("Show verbose printing of informational messages.");
1999-06-21 15:27:42 +02:00
}
else
{
Fix leak of set/show verbose doc, avoid xfree of static string In the tests py-pp-registration/gdb.log default/gdb.log foll-fork/gdb.log setshow/gdb.log break-interp/gdb.log Valgrind detects a leak of the doc strings for the set and show verbose cmd. Here is the stacktrace of the leaked set doc: ==25548== 15 bytes in 1 blocks are definitely lost in loss record 101 of 3,120 ==25548== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309) ==25548== by 0x409C27: xmalloc (common-utils.c:44) ==25548== by 0x778AF9: xstrdup (xstrdup.c:34) ==25548== by 0x3F860F: add_setshow_cmd_full(char const*, command_class, var_types, void*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**, cmd_list_element**, cmd_list_element**) [clone .constprop.10] (cli-decode.c:495) ==25548== by 0x3F8ADB: add_setshow_boolean_cmd(char const*, command_class, int*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**) (cli-decode.c:593) ==25548== by 0x3F7442: _initialize_cli_cmds() (cli-cmds.c:1768) ==25548== by 0x69EED3: initialize_all_files() (init.c:365) ==25548== by 0x658A84: gdb_init(char*) (top.c:2163) ==25548== by 0x5403E1: captured_main_1 (main.c:863) ==25548== by 0x5403E1: captured_main (main.c:1167) ==25548== by 0x5403E1: gdb_main(captured_main_args*) (main.c:1193) ==25548== by 0x289CA7: main (gdb.c:32) The leak is created by top.c set_verbose 'elaborate joke': the doc string is changed according to the verbosity: (gdb) help set verbose Set verbosity. (gdb) set verbose on (gdb) help set verbose Set verbose printing of informational messages. (gdb) set_verbose creates the leak as it replaces the string allocated in the above stacktrace by a static (non translated) string: ... if (info_verbose) { c->doc = "Set verbose printing of informational messages."; ... Also, this can possibly trigger a call to 'free' of a static string, as c->doc_allocated is kept true, while the string is not allocated anymore. This patch: * fixes the leak by freeing the previous docs if doc_allocated. * internationalize the messages. * properly sets doc_allocated to 0 once doc strings are static. gdb/ChangeLog 2018-12-28 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (set_verbose): Free previous docs if doc_allocated. Internationalize messages. Set doc_allocated to 0.
2018-12-28 12:19:59 +01:00
c->doc = _("Set verbosity.");
showcmd->doc = _("Show verbosity.");
1999-06-21 15:27:42 +02:00
}
Fix leak of set/show verbose doc, avoid xfree of static string In the tests py-pp-registration/gdb.log default/gdb.log foll-fork/gdb.log setshow/gdb.log break-interp/gdb.log Valgrind detects a leak of the doc strings for the set and show verbose cmd. Here is the stacktrace of the leaked set doc: ==25548== 15 bytes in 1 blocks are definitely lost in loss record 101 of 3,120 ==25548== at 0x4C2BE6D: malloc (vg_replace_malloc.c:309) ==25548== by 0x409C27: xmalloc (common-utils.c:44) ==25548== by 0x778AF9: xstrdup (xstrdup.c:34) ==25548== by 0x3F860F: add_setshow_cmd_full(char const*, command_class, var_types, void*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**, cmd_list_element**, cmd_list_element**) [clone .constprop.10] (cli-decode.c:495) ==25548== by 0x3F8ADB: add_setshow_boolean_cmd(char const*, command_class, int*, char const*, char const*, char const*, void (*)(char const*, int, cmd_list_element*), void (*)(ui_file*, int, cmd_list_element*, char const*), cmd_list_element**, cmd_list_element**) (cli-decode.c:593) ==25548== by 0x3F7442: _initialize_cli_cmds() (cli-cmds.c:1768) ==25548== by 0x69EED3: initialize_all_files() (init.c:365) ==25548== by 0x658A84: gdb_init(char*) (top.c:2163) ==25548== by 0x5403E1: captured_main_1 (main.c:863) ==25548== by 0x5403E1: captured_main (main.c:1167) ==25548== by 0x5403E1: gdb_main(captured_main_args*) (main.c:1193) ==25548== by 0x289CA7: main (gdb.c:32) The leak is created by top.c set_verbose 'elaborate joke': the doc string is changed according to the verbosity: (gdb) help set verbose Set verbosity. (gdb) set verbose on (gdb) help set verbose Set verbose printing of informational messages. (gdb) set_verbose creates the leak as it replaces the string allocated in the above stacktrace by a static (non translated) string: ... if (info_verbose) { c->doc = "Set verbose printing of informational messages."; ... Also, this can possibly trigger a call to 'free' of a static string, as c->doc_allocated is kept true, while the string is not allocated anymore. This patch: * fixes the leak by freeing the previous docs if doc_allocated. * internationalize the messages. * properly sets doc_allocated to 0 once doc strings are static. gdb/ChangeLog 2018-12-28 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.c (set_verbose): Free previous docs if doc_allocated. Internationalize messages. Set doc_allocated to 0.
2018-12-28 12:19:59 +01:00
c->doc_allocated = 0;
showcmd->doc_allocated = 0;
1999-06-21 15:27:42 +02:00
}
/* Init the history buffer. Note that we are called after the init file(s)
have been read so that the user can change the history file via his
.gdbinit file (for instance). The GDBHISTFILE environment variable
overrides all of this. */
1999-06-21 15:27:42 +02:00
void
2000-07-30 03:48:28 +02:00
init_history (void)
1999-06-21 15:27:42 +02:00
{
const char *tmpenv;
1999-06-21 15:27:42 +02:00
tmpenv = getenv ("GDBHISTSIZE");
1999-06-21 15:27:42 +02:00
if (tmpenv)
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
{
long var;
int saved_errno;
char *endptr;
tmpenv = skip_spaces (tmpenv);
errno = 0;
var = strtol (tmpenv, &endptr, 10);
saved_errno = errno;
endptr = skip_spaces (endptr);
/* If GDBHISTSIZE is non-numeric then ignore it. If GDBHISTSIZE is the
empty string, a negative number or a huge positive number (larger than
INT_MAX) then set the history size to unlimited. Otherwise set our
history size to the number we have read. This behavior is consistent
with how bash handles HISTSIZE. */
if (*endptr != '\0')
;
else if (*tmpenv == '\0'
|| var < 0
|| var > INT_MAX
/* On targets where INT_MAX == LONG_MAX, we have to look at
errno after calling strtol to distinguish between a value that
is exactly INT_MAX and an overflowing value that was clamped
to INT_MAX. */
|| (var == INT_MAX && saved_errno == ERANGE))
history_size_setshow_var = -1;
else
history_size_setshow_var = var;
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
}
/* If neither the init file nor GDBHISTSIZE has set a size yet, pick the
default. */
if (history_size_setshow_var == -2)
Forbid "set history size (INT_MAX..UINT_MAX)" The whole readline interface is signed, and works with the 0..INT_MAX range. We don't allow setting the size to UINT_MAX directly. The documented user visible interface is "use 0 for unlimited". The UINT_MAX representation is an implementation detail we could change, e.g., by keeping a separate flag for "unlimited", which is actually what the readline interface does (stifled vs non stifled). Generically speaking, exposing this detail to clients of the interface may make our lives complicated when we find the need to extend the range of some command in the future, and it's better if users (frontends/scripts) aren't relying on anything but what we tell them to use for "unlimited". Making values other than 0 error out is the way to prevent users from using those ranges inappropriately. Quite related, note: (gdb) set history size 0xffffffff integer 4294967295 out of range But, (gdb) set history size 0xfffffffe (gdb) show history size The size of the command history is unlimited. (gdb) set history size 0x100000000 integer 4294967296 out of range If values over INT_MAX are accepted as unlimited, then there's no good argument for only accepting [INT_MAX..UINT_MAX) as valid "unlimited" magic numbers, while not accepting [UINT_MAX..inf). Making the setting's control variable of different type (unsigned int) of the rest of the related code (int) adds the need to recall that one variable among all these is unsigned, and that one need to think about whether these comparisons are signed or unsigned, along with the promotion/conversion rules. Since this is an easy to forget detail, this patch renames the variable to at least make it more obvious that this variable is not one of GNU history's public int variables, which are all signed. We don't actually need the only code that presently is affected by this, though, the code that is computing the current history's length. We can just use GNU history's history_length instead: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Variable: int history_length The number of entries currently stored in the history list. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ /* Return the history entry which is logically at OFFSET in the history array. OFFSET is relative to history_base. */ HIST_ENTRY * history_get (offset) int offset; { int local_index; local_index = offset - history_base; return (local_index >= history_length || local_index < 0 || the_history == 0) ? (HIST_ENTRY *)NULL : the_history[local_index]; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ At the time this code was added (gdb 4.13 ~1994), 'history_length' was extern, but not documented in readline's GNU history documents, so I guess it wasn't considered public then and the loop was the workaround. One of the warts of GDB choosing 0 to mean unlimited is that "set history size 0" behaves differently from 'HISTSIZE=0 gdb'. The latter leaves GDB with no history, while the former means "unlimited"... $ HISTSIZE=0 ./gdb ... (gdb) show history size The size of the command history is 0. We shouldn't really change what HISTSIZE=0 means, as bash, etc. also handle 0 as real zero, and zero it's what really makes sense. gdb/ 2013-03-27 Pedro Alves <palves@redhat.com> * top.c (history_size): Rename to ... (history_size_setshow_var): ... this. Add comment. (show_commands): Use readline's 'history_length' instead of computing the history length by calling history_get in a loop. (set_history_size_command): Error out for sizes over INT_MAX. Restore previous history size on invalid size. (init_history): If HISTSIZE is negative, leave the history size as zero. Add comments. (init_main): Adjust.
2013-03-27 13:14:09 +01:00
history_size_setshow_var = 256;
1999-06-21 15:27:42 +02:00
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
set_readline_history_size (history_size_setshow_var);
1999-06-21 15:27:42 +02:00
tmpenv = getenv ("GDBHISTFILE");
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
if (tmpenv != nullptr)
history_filename = xstrdup (tmpenv);
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
else if (history_filename == nullptr)
1999-07-07 22:19:36 +02:00
{
/* We include the current directory so that if the user changes
directories the file written will be the same as the one
that was read. */
1999-08-03 01:48:37 +02:00
#ifdef __MSDOS__
/* No leading dots in file names are allowed on MSDOS. */
Guard against 'current_directory == NULL' on gdb_abspath (PR gdb/23613) Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1728147 Ref.: https://sourceware.org/bugzilla/show_bug.cgi?id=23613 Hi, This bug has been reported against Fedora GDB, but there's also an upstream bug. The problem reported is that GDB segfaults when the working directory is deleted. It's pretty use to reproduce it: mkdir bla cd bla rmdir ../bla gdb echo Debugging the problem is a bit tricky, because, since the current directory doesn't exist anymore, a corefile cannot be saved there. After a few attempts, I came up with the following: gdb -ex 'shell mkdir bla' -ex 'cd bla' -ex 'shell rmdir ../bla' -ex 'r echo' ./gdb/gdb This assumes that you're inside a build directory which contains ./gdb/gdb, of course. After investigating it, I found that the problem happens at gdb_abspath, where we're dereferencing 'current_directory' without checking if it's NULL: ... (concat (current_directory, IS_DIR_SEPARATOR (current_directory[strlen (current_directory) - 1]) ? "" : SLASH_STRING, ... So I fixed the problem with the patch below. The idea is that, if 'current_directory' is NULL, then the final string returned should be just the "path". After fixing the bug, I found a similar one reported against our bugzilla: PR gdb/23613. The problem is the same, but the reproducer is a bit different. I really tried writing a testcase for this, but unfortunately it's apparently not possible to start GDB inside a non-existent directory with DejaGNU. I regression tested this patch on the BuildBot, and no regressions were found. gdb/ChangeLog: 2019-12-14 Sergio Durigan Junior <sergiodj@redhat.com> https://bugzilla.redhat.com/show_bug.cgi?id=1728147 PR gdb/23613 * bsd-kvm.c (bsd_kvm_target_open): Use 'gdb_abspath'. * corelow.c: Include 'gdbsupport/pathstuff.h'. (core_target_open): Use 'gdb_abspath'. * gdbsupport/pathstuff.c (gdb_abspath): Guard against 'current_directory == NULL' case. * gdbsupport/pathstuff.h (gdb_abspath): Expand comment and explain what happens when 'current_directory' is NULL. * go32-nat.c (go32_nat_target::wait): Check if 'current_directory' is NULL before call to 'chdir'. * source.c (add_path): Use 'gdb_abspath'. * top.c: Include 'gdbsupport/pathstuff.h'. (init_history): Use 'gdb_abspath'. (set_history_filename): Likewise. * tracefile-tfile.c: Include 'gdbsupport/pathstuff.h'. (tfile_target_open): Use 'gdb_abspath'. Change-Id: Ibb0932fa25bc5c2d3ae4a7f64bd7f32885ca403b
2019-07-10 22:18:27 +02:00
const char *fname = "_gdb_history";
1999-08-03 01:48:37 +02:00
#else
Guard against 'current_directory == NULL' on gdb_abspath (PR gdb/23613) Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1728147 Ref.: https://sourceware.org/bugzilla/show_bug.cgi?id=23613 Hi, This bug has been reported against Fedora GDB, but there's also an upstream bug. The problem reported is that GDB segfaults when the working directory is deleted. It's pretty use to reproduce it: mkdir bla cd bla rmdir ../bla gdb echo Debugging the problem is a bit tricky, because, since the current directory doesn't exist anymore, a corefile cannot be saved there. After a few attempts, I came up with the following: gdb -ex 'shell mkdir bla' -ex 'cd bla' -ex 'shell rmdir ../bla' -ex 'r echo' ./gdb/gdb This assumes that you're inside a build directory which contains ./gdb/gdb, of course. After investigating it, I found that the problem happens at gdb_abspath, where we're dereferencing 'current_directory' without checking if it's NULL: ... (concat (current_directory, IS_DIR_SEPARATOR (current_directory[strlen (current_directory) - 1]) ? "" : SLASH_STRING, ... So I fixed the problem with the patch below. The idea is that, if 'current_directory' is NULL, then the final string returned should be just the "path". After fixing the bug, I found a similar one reported against our bugzilla: PR gdb/23613. The problem is the same, but the reproducer is a bit different. I really tried writing a testcase for this, but unfortunately it's apparently not possible to start GDB inside a non-existent directory with DejaGNU. I regression tested this patch on the BuildBot, and no regressions were found. gdb/ChangeLog: 2019-12-14 Sergio Durigan Junior <sergiodj@redhat.com> https://bugzilla.redhat.com/show_bug.cgi?id=1728147 PR gdb/23613 * bsd-kvm.c (bsd_kvm_target_open): Use 'gdb_abspath'. * corelow.c: Include 'gdbsupport/pathstuff.h'. (core_target_open): Use 'gdb_abspath'. * gdbsupport/pathstuff.c (gdb_abspath): Guard against 'current_directory == NULL' case. * gdbsupport/pathstuff.h (gdb_abspath): Expand comment and explain what happens when 'current_directory' is NULL. * go32-nat.c (go32_nat_target::wait): Check if 'current_directory' is NULL before call to 'chdir'. * source.c (add_path): Use 'gdb_abspath'. * top.c: Include 'gdbsupport/pathstuff.h'. (init_history): Use 'gdb_abspath'. (set_history_filename): Likewise. * tracefile-tfile.c: Include 'gdbsupport/pathstuff.h'. (tfile_target_open): Use 'gdb_abspath'. Change-Id: Ibb0932fa25bc5c2d3ae4a7f64bd7f32885ca403b
2019-07-10 22:18:27 +02:00
const char *fname = ".gdb_history";
1999-08-03 01:48:37 +02:00
#endif
Guard against 'current_directory == NULL' on gdb_abspath (PR gdb/23613) Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1728147 Ref.: https://sourceware.org/bugzilla/show_bug.cgi?id=23613 Hi, This bug has been reported against Fedora GDB, but there's also an upstream bug. The problem reported is that GDB segfaults when the working directory is deleted. It's pretty use to reproduce it: mkdir bla cd bla rmdir ../bla gdb echo Debugging the problem is a bit tricky, because, since the current directory doesn't exist anymore, a corefile cannot be saved there. After a few attempts, I came up with the following: gdb -ex 'shell mkdir bla' -ex 'cd bla' -ex 'shell rmdir ../bla' -ex 'r echo' ./gdb/gdb This assumes that you're inside a build directory which contains ./gdb/gdb, of course. After investigating it, I found that the problem happens at gdb_abspath, where we're dereferencing 'current_directory' without checking if it's NULL: ... (concat (current_directory, IS_DIR_SEPARATOR (current_directory[strlen (current_directory) - 1]) ? "" : SLASH_STRING, ... So I fixed the problem with the patch below. The idea is that, if 'current_directory' is NULL, then the final string returned should be just the "path". After fixing the bug, I found a similar one reported against our bugzilla: PR gdb/23613. The problem is the same, but the reproducer is a bit different. I really tried writing a testcase for this, but unfortunately it's apparently not possible to start GDB inside a non-existent directory with DejaGNU. I regression tested this patch on the BuildBot, and no regressions were found. gdb/ChangeLog: 2019-12-14 Sergio Durigan Junior <sergiodj@redhat.com> https://bugzilla.redhat.com/show_bug.cgi?id=1728147 PR gdb/23613 * bsd-kvm.c (bsd_kvm_target_open): Use 'gdb_abspath'. * corelow.c: Include 'gdbsupport/pathstuff.h'. (core_target_open): Use 'gdb_abspath'. * gdbsupport/pathstuff.c (gdb_abspath): Guard against 'current_directory == NULL' case. * gdbsupport/pathstuff.h (gdb_abspath): Expand comment and explain what happens when 'current_directory' is NULL. * go32-nat.c (go32_nat_target::wait): Check if 'current_directory' is NULL before call to 'chdir'. * source.c (add_path): Use 'gdb_abspath'. * top.c: Include 'gdbsupport/pathstuff.h'. (init_history): Use 'gdb_abspath'. (set_history_filename): Likewise. * tracefile-tfile.c: Include 'gdbsupport/pathstuff.h'. (tfile_target_open): Use 'gdb_abspath'. Change-Id: Ibb0932fa25bc5c2d3ae4a7f64bd7f32885ca403b
2019-07-10 22:18:27 +02:00
gdb::unique_xmalloc_ptr<char> temp (gdb_abspath (fname));
history_filename = temp.release ();
1999-07-07 22:19:36 +02:00
}
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
if (!history_filename_empty ())
read_history (history_filename);
1999-06-21 15:27:42 +02:00
}
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
static void
show_prompt (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
{
fprintf_filtered (file, _("Gdb's prompt is \"%s\".\n"), value);
}
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
/* "set editing" command. */
static void
Constify add_setshow_* This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify.
2017-10-14 17:07:00 +02:00
set_editing (const char *args, int from_tty, struct cmd_list_element *c)
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
{
change_line_handler (set_editing_cmd_var);
/* Update the control variable so that MI's =cmd-param-changed event
shows the correct value. */
set_editing_cmd_var = current_ui->command_editing;
}
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
static void
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
show_editing (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
{
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
fprintf_filtered (file, _("Editing of command lines as "
"they are typed is %s.\n"),
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
current_ui->command_editing ? _("on") : _("off"));
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
}
static void
show_annotation_level (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("Annotation_level is %s.\n"), value);
}
static void
show_exec_done_display_p (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
fprintf_filtered (file, _("Notification of completion for "
"asynchronous execution commands is %s.\n"),
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
value);
}
/* New values of the "data-directory" parameter are staged here. */
static char *staged_gdb_datadir;
/* "set" command for the gdb_datadir configuration variable. */
static void
Constify add_setshow_* This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify.
2017-10-14 17:07:00 +02:00
set_gdb_datadir (const char *args, int from_tty, struct cmd_list_element *c)
{
set_gdb_data_directory (staged_gdb_datadir);
Convert observers to C++ This converts observers from using a special source-generating script to be plain C++. This version of the patch takes advantage of C++11 by using std::function and variadic templates; incorporates Pedro's patches; and renames the header file to "observable.h" (this change eliminates the need for a clean rebuild). Note that Pedro's patches used a template lambda in tui-hooks.c, but this failed to compile on some buildbot instances (presumably due to differing C++ versions); I replaced this with an ordinary template function. Regression tested on the buildbot. gdb/ChangeLog 2018-03-19 Pedro Alves <palves@redhat.com> Tom Tromey <tom@tromey.com> * unittests/observable-selftests.c: New file. * common/observable.h: New file. * observable.h: New file. * ada-lang.c, ada-tasks.c, agent.c, aix-thread.c, annotate.c, arm-tdep.c, auto-load.c, auxv.c, break-catch-syscall.c, breakpoint.c, bsd-uthread.c, cli/cli-interp.c, cli/cli-setshow.c, corefile.c, dummy-frame.c, event-loop.c, event-top.c, exec.c, extension.c, frame.c, gdbarch.c, guile/scm-breakpoint.c, infcall.c, infcmd.c, inferior.c, inflow.c, infrun.c, jit.c, linux-tdep.c, linux-thread-db.c, m68klinux-tdep.c, mi/mi-cmd-break.c, mi/mi-interp.c, mi/mi-main.c, objfiles.c, ppc-linux-nat.c, ppc-linux-tdep.c, printcmd.c, procfs.c, python/py-breakpoint.c, python/py-finishbreakpoint.c, python/py-inferior.c, python/py-unwind.c, ravenscar-thread.c, record-btrace.c, record-full.c, record.c, regcache.c, remote.c, riscv-tdep.c, sol-thread.c, solib-aix.c, solib-spu.c, solib.c, spu-multiarch.c, spu-tdep.c, stack.c, symfile-mem.c, symfile.c, symtab.c, thread.c, top.c, tracepoint.c, tui/tui-hooks.c, tui/tui-interp.c, valops.c: Update all users. * tui/tui-hooks.c (tui_bp_created_observer) (tui_bp_deleted_observer, tui_bp_modified_observer) (tui_inferior_exit_observer, tui_before_prompt_observer) (tui_normal_stop_observer, tui_register_changed_observer): Remove. (tui_observers_token): New global. (attach_or_detach, tui_attach_detach_observers): New functions. (tui_install_hooks, tui_remove_hooks): Use tui_attach_detach_observers. * record-btrace.c (record_btrace_thread_observer): Remove. (record_btrace_thread_observer_token): New global. * observer.sh: Remove. * observer.c: Rename to observable.c. * observable.c (namespace gdb_observers): Define new objects. (observer_debug): Move into gdb_observers namespace. (struct observer, struct observer_list, xalloc_observer_list_node) (xfree_observer_list_node, generic_observer_attach) (generic_observer_detach, generic_observer_notify): Remove. (_initialize_observer): Update. Don't include observer.inc. * Makefile.in (generated_files): Remove observer.h, observer.inc. (clean mostlyclean): Likewise. (observer.h, observer.inc): Remove targets. (SUBDIR_UNITTESTS_SRCS): Add observable-selftests.c. (COMMON_SFILES): Use observable.c, not observer.c. * .gitignore: Remove observer.h. gdb/doc/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * observer.texi: Remove. gdb/testsuite/ChangeLog 2018-03-19 Tom Tromey <tom@tromey.com> * gdb.gdb/observer.exp: Remove.
2016-10-02 18:50:20 +02:00
gdb::observers::gdb_datadir_changed.notify ();
}
/* "show" command for the gdb_datadir configuration variable. */
static void
show_gdb_datadir (struct ui_file *file, int from_tty,
struct cmd_list_element *c, const char *value)
{
fprintf_filtered (file, _("GDB's data directory is \"%ps\".\n"),
styled_string (file_name_style.style (),
gdb_datadir.c_str ()));
}
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
/* Implement 'set history filename'. */
static void
Constify add_setshow_* This constifies the add_setshow_* family of functions, and then fixes up the fallout. The bulk of this patch was written by script. gdb/ChangeLog 2017-11-07 Tom Tromey <tom@tromey.com> * ada-lang.c (catch_ada_exception_command): Constify. (catch_assert_command): Constify. * break-catch-throw.c (catch_catch_command, catch_throw_command) (catch_rethrow_command): Constify. (catch_exception_command_1): Constify. * breakpoint.h (add_catch_command): Constify. * break-catch-syscall.c (catch_syscall_command_1): Constify. (catch_syscall_split_args): Constify. * break-catch-sig.c (catch_signal_command): Constify. (catch_signal_split_args): Constify. * cli/cli-decode.h (struct cmd_list_element) <function>: Use cmd_const_sfunc_ftype. * cli/cli-decode.c (add_setshow_cmd_full): Constify. (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, struct cmd_list_element) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_unlimited_cmd, add_setshow_zuinteger_cmd): Constify. (set_cmd_sfunc): Constify. (empty_sfunc): Constify. * command.h (add_setshow_enum_cmd, add_setshow_auto_boolean_cmd) (add_setshow_boolean_cmd, add_setshow_filename_cmd) (add_setshow_string_cmd, add_setshow_string_noescape_cmd) (add_setshow_optional_filename_cmd, add_setshow_integer_cmd) (add_setshow_uinteger_cmd, add_setshow_zinteger_cmd) (add_setshow_zuinteger_cmd, add_setshow_zuinteger_unlimited_cmd): Constify. (set_cmd_sfunc): Constify. (cmd_sfunc_ftype): Remove. * compile/compile.c (set_compile_args): Constify. * infrun.c (set_disable_randomization): Constify. * infcmd.c (set_args_command, set_cwd_command): Constify. * breakpoint.c (set_condition_evaluation_mode): Constify. (add_catch_command): Constify. (catch_fork_command_1, catch_exec_command_1) (catch_load_command_1, catch_unload_command_1): Constify. (catch_load_or_unload): Constify. * guile/scm-param.c (pascm_set_func): Constify. (add_setshow_generic): Constify. * python/py-param.c (get_set_value): Constify. * top.h (set_verbose): Constify. * tui/tui-win.c (tui_set_var_cmd): Constify. * mi/mi-main.c (set_mi_async_command): Constify. * cli/cli-logging.c (set_logging_overwrite) (set_logging_redirect): Constify. * value.c (set_max_value_size): Constify. * valprint.c (set_input_radix, set_output_radix): Constify. * utils.c (set_width_command, set_height_command): Constify. * typeprint.c (set_print_type_methods, set_print_type_typedefs): Constify. * tracepoint.c (set_disconnected_tracing) (set_circular_trace_buffer, set_trace_buffer_size) (set_trace_user, set_trace_notes, set_trace_stop_notes): Constify. * top.c (set_history_size_command, set_verbose, set_editing) (set_gdb_datadir, set_history_filename): Constify. * target.c (set_targetdebug, maint_set_target_async_command) (maint_set_target_non_stop_command, set_target_permissions) (set_write_memory_permission): Constify. (open_target): Constify. * target-descriptions.c (set_tdesc_filename_cmd): Constify. * target-dcache.c (set_stack_cache, set_code_cache): Constify. * symtab.c (set_symbol_cache_size_handler): Constify. * symfile.c (set_ext_lang_command): Constify. * symfile-debug.c (set_debug_symfile): Constify. * source.c (set_directories_command): Constify. * solib.c (reload_shared_libraries, gdb_sysroot_changed): Constify. * serial.c (set_parity): Constify. * rs6000-tdep.c (powerpc_set_soft_float, powerpc_set_vector_abi): Constify. * remote.c (set_remote_exec_file, set_remotebreak) (set_remote_protocol_Z_packet_cmd, set_range_stepping): Constify. * record.c (set_record_insn_history_size) (set_record_call_history_size): Constify. * record-full.c (set_record_full_insn_max_num): Constify. * proc-api.c (set_procfs_trace_cmd, set_procfs_file_cmd): Constify. * osabi.c (set_osabi): Constify. * mips-tdep.c (set_mips64_transfers_32bit_regs) (reinit_frame_cache_sfunc, mips_abi_update): Constify. * maint.c (maintenance_set_profile_cmd): Constify. * linux-thread-db.c (set_libthread_db_search_path): Constify. * language.c (set_language_command, set_range_command) (set_case_command): Constify. * infrun.c (set_non_stop, set_observer_mode) (set_stop_on_solib_events, set_schedlock_func) (set_exec_direction_func): Constify. * infcmd.c (set_inferior_tty_command): Constify. * disasm.c (set_disassembler_options_sfunc): Constify. * demangle.c (set_demangling_command): Constify. * dcache.c (set_dcache_size, set_dcache_line_size): Constify. * cris-tdep.c (set_cris_version, set_cris_mode) (set_cris_dwarf2_cfi): Constify. * corefile.c (set_gnutarget_command): Constify. * charset.c (set_host_charset_sfunc, set_target_charset_sfunc) (set_target_wide_charset_sfunc): Constify. * breakpoint.c (update_dprintf_commands): Constify. * auto-load.c (set_auto_load_dir, set_auto_load_safe_path): Constify. * arm-tdep.c (set_fp_model_sfunc, arm_set_abi) (set_disassembly_style_sfunc): Constify. * arch-utils.c (set_endian, set_architecture): Constify. * alpha-tdep.c (reinit_frame_cache_sfunc): Constify. * agent.c (set_can_use_agent): Constify.
2017-10-14 17:07:00 +02:00
set_history_filename (const char *args,
int from_tty, struct cmd_list_element *c)
{
/* We include the current directory so that if the user changes
directories the file written will be the same as the one
that was read. */
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
if (!history_filename_empty () && !IS_ABSOLUTE_PATH (history_filename))
Guard against 'current_directory == NULL' on gdb_abspath (PR gdb/23613) Ref.: https://bugzilla.redhat.com/show_bug.cgi?id=1728147 Ref.: https://sourceware.org/bugzilla/show_bug.cgi?id=23613 Hi, This bug has been reported against Fedora GDB, but there's also an upstream bug. The problem reported is that GDB segfaults when the working directory is deleted. It's pretty use to reproduce it: mkdir bla cd bla rmdir ../bla gdb echo Debugging the problem is a bit tricky, because, since the current directory doesn't exist anymore, a corefile cannot be saved there. After a few attempts, I came up with the following: gdb -ex 'shell mkdir bla' -ex 'cd bla' -ex 'shell rmdir ../bla' -ex 'r echo' ./gdb/gdb This assumes that you're inside a build directory which contains ./gdb/gdb, of course. After investigating it, I found that the problem happens at gdb_abspath, where we're dereferencing 'current_directory' without checking if it's NULL: ... (concat (current_directory, IS_DIR_SEPARATOR (current_directory[strlen (current_directory) - 1]) ? "" : SLASH_STRING, ... So I fixed the problem with the patch below. The idea is that, if 'current_directory' is NULL, then the final string returned should be just the "path". After fixing the bug, I found a similar one reported against our bugzilla: PR gdb/23613. The problem is the same, but the reproducer is a bit different. I really tried writing a testcase for this, but unfortunately it's apparently not possible to start GDB inside a non-existent directory with DejaGNU. I regression tested this patch on the BuildBot, and no regressions were found. gdb/ChangeLog: 2019-12-14 Sergio Durigan Junior <sergiodj@redhat.com> https://bugzilla.redhat.com/show_bug.cgi?id=1728147 PR gdb/23613 * bsd-kvm.c (bsd_kvm_target_open): Use 'gdb_abspath'. * corelow.c: Include 'gdbsupport/pathstuff.h'. (core_target_open): Use 'gdb_abspath'. * gdbsupport/pathstuff.c (gdb_abspath): Guard against 'current_directory == NULL' case. * gdbsupport/pathstuff.h (gdb_abspath): Expand comment and explain what happens when 'current_directory' is NULL. * go32-nat.c (go32_nat_target::wait): Check if 'current_directory' is NULL before call to 'chdir'. * source.c (add_path): Use 'gdb_abspath'. * top.c: Include 'gdbsupport/pathstuff.h'. (init_history): Use 'gdb_abspath'. (set_history_filename): Likewise. * tracefile-tfile.c: Include 'gdbsupport/pathstuff.h'. (tfile_target_open): Use 'gdb_abspath'. Change-Id: Ibb0932fa25bc5c2d3ae4a7f64bd7f32885ca403b
2019-07-10 22:18:27 +02:00
{
gdb::unique_xmalloc_ptr<char> temp (gdb_abspath (history_filename));
xfree (history_filename);
history_filename = temp.release ();
}
}
static void
init_gdb_version_vars (void)
{
struct internalvar *major_version_var = create_internalvar ("_gdb_major");
struct internalvar *minor_version_var = create_internalvar ("_gdb_minor");
int vmajor = 0, vminor = 0, vrevision = 0;
sscanf (version, "%d.%d.%d", &vmajor, &vminor, &vrevision);
set_internalvar_integer (major_version_var, vmajor);
set_internalvar_integer (minor_version_var, vminor + (vrevision > 0));
}
1999-06-21 15:27:42 +02:00
static void
2000-07-30 03:48:28 +02:00
init_main (void)
1999-06-21 15:27:42 +02:00
{
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
struct cmd_list_element *c;
/* Initialize the prompt to a simple "(gdb) " prompt or to whatever
the DEFAULT_PROMPT is. */
set_prompt (DEFAULT_PROMPT);
1999-06-21 15:27:42 +02:00
/* Set the important stuff up for command editing. */
command_editing_p = 1;
history_expansion_p = 0;
write_history_p = 0;
1999-06-21 15:27:42 +02:00
/* Setup important stuff for command line editing. */
rl_completion_word_break_hook = gdb_completion_word_break_characters;
Introduce class completion_tracker & rewrite completion<->readline interaction This patch reworks the whole completion machinery, and prepares it for later enhancements. Adds a new "completion_tracker" class that is meant to hold everything about the state of the current completion operation. This class now has the responsibility of tracking the list of completion matches, and checking whether the max completions limit has been reached. You can look at this as this patch starting out by C++fying the existing "completion_tracker" in symtab.c (it's just an htab_t typedef currently), moving it to completer.h/c, and then making it a class/generalizing/enhancing it. Unlike with the current tracking, completion_tracker now checks whether the limit has been reached on each completion match list insertion. This both simplifies the max-completions handling code (maybe_add_completion_enum is gone, for example), and is a prerequisite for follow up patches. The current completion_tracker is only used for symbol completions, and the symbol code gets at the current instance via globals. This patch cleans that up by adding a completion_tracker reference to the signature of the completion functions, and passing the tracker around everywhere necessary. Then, the patch changes how the completion match list is handed over to readline. Currently, we're using the rl_completion_entry_function readline entry point, and the patch switches to rl_attempted_completion_function. A following patch will want to let GDB itself decide the common completion prefix between all matches (what readline calls the "lowest common denominator"), instead of having readline compute it, and that's not possible with the rl_completion_entry_function entry point. Also, rl_attempted_completion_function lets GDB hand over the match list to readline as an array in one go instead of passing down matches one by one, so from that angle it's a nicer entry point anyway. Lastly, the patch catches exceptions around the readline entry points, because we can't let C++ exceptions cross readline. We handle that in the readline input entry point, but the completion entry point isn't guarded, so GDB can abort if completion throws. E.g., in current master: (gdb) b -function "fun<tab> terminate called after throwing an instance of 'gdb_exception_RETURN_MASK_ERROR' Aborted (core dumped) This patch fixes that. This will be exercised in the new tests added later on in the series. gdb/ChangeLog: 2017-07-17 Pedro Alves <palves@redhat.com> * ada-lang.c (symbol_completion_match): Adjust comments. (symbol_completion_add): Replace vector parameter with completion_tracker parameter. Use it. (ada_make_symbol_completion_list): Rename to... (ada_collect_symbol_completion_matches): ... this. Add completion_tracker parameter and use it. (ada_language_defn): Adjust. * break-catch-syscall.c (catch_syscall_completer): Adjust prototype and work with completion_tracker instead of VEC. * breakpoint.c (condition_completer): Adjust prototype and work with completion_tracker instead of VEC. * c-lang.c (c_language_defn, cplus_language_defn) (asm_language_defn, minimal_language_defn): Adjust to renames. * cli/cli-cmds.c (complete_command): Rework using completion_tracker. Catch exceptions when completing. * cli/cli-decode.c (integer_unlimited_completer) (complete_on_cmdlist, complete_on_enum): Adjust prototype and work with completion_tracker instead of VEC. * command.h (struct completion_tracker): Forward declare. (completer_ftype, completer_handle_brkchars_ftype): Change types. (complete_on_cmdlist, complete_on_enum): Adjust. * completer.c: Include <algorithm>. (struct gdb_completer_state): New. (current_completion): New global. (readline_line_completion_function): Delete. (noop_completer, filename_completer) (filename_completer_handle_brkchars, complete_files_symbols) (linespec_location_completer): Adjust to work with a completion_tracker instead of a VEC. (string_or_empty): New. (collect_explicit_location_matches): Adjust to work with a completion_tracker instead of a VEC. (explicit_location_completer): Rename to ... (complete_explicit_location): ... this and adjust to work with a completion_tracker instead of a VEC. (location_completer): Adjust to work with a completion_tracker instead of a VEC. (add_struct_fields): Adjust to work with a completion_list instead of VEC. (expression_completer): Rename to ... (complete_expression): ... this and adjust to work with a completion_tracker instead of a VEC. Use complete_files_symbols. (expression_completer): Reimplement on top of complete_expression. (symbol_completer): Adjust to work with a completion_tracker instead of a VEC. (enum complete_line_internal_reason): Add describing comments. (complete_line_internal_normal_command): Adjust to work with a completion_tracker instead of a VEC. (complete_line_internal): Rename to ... (complete_line_internal_1): ... this and adjust to work with a completion_tracker instead of a VEC. Assert TEXT is NULL in the handle_brkchars phase. (new_completion_tracker): Delete. (complete_line_internal): Reimplement as TRY/CATCH wrapper around complete_line_internal_1. (free_completion_tracker): Delete. (INITIAL_COMPLETION_HTAB_SIZE): New. (completion_tracker::completion_tracker) (completion_tracker::~completion_tracker): New. (maybe_add_completion): Delete. (completion_tracker::maybe_add_completion) (completion_tracker::add_completion) (completion_tracker::add_completions): New. (throw_max_completions_reached_error): Delete. (complete_line): Adjust to work with a completion_tracker instead of a VEC. Don't create a completion_tracker_t or check for max completions here. (command_completer, command_completer_handle_brkchars) (signal_completer, reg_or_group_completer_1) (reg_or_group_completer, default_completer_handle_brkchars): Adjust to work with a completion_tracker. (gdb_completion_word_break_characters_throw): New. (gdb_completion_word_break_characters): Reimplement. (line_completion_function): Delete. (completion_tracker::recompute_lowest_common_denominator) (expand_preserving_ws) (completion_tracker::build_completion_result) (completion_result::completion_result) (completion_result::completion_result) (completion_result::~completion_result) (completion_result::completion_result) (completion_result::release_match_list, compare_cstrings) (completion_result::sort_match_list) (completion_result::reset_match_list) (gdb_rl_attempted_completion_function_throw) (gdb_rl_attempted_completion_function): New. * completer.h (completion_list, struct completion_result) (class completion_tracker): New. (complete_line): Add completion_tracker parameter. (readline_line_completion_function): Delete. (gdb_rl_attempted_completion_function): New. (noop_completer, filename_completer, expression_completer) (location_completer, symbol_completer, command_completer) (signal_completer, reg_or_group_completer): Update prototypes. (completion_tracker_t, new_completion_tracker) (make_cleanup_free_completion_tracker): Delete. (enum maybe_add_completion_enum): Delete. (maybe_add_completion): Delete. (throw_max_completions_reached_error): Delete. * corefile.c (complete_set_gnutarget): Adjust to work with a completion_tracker instead of a VEC. * cp-abi.c (cp_abi_completer): Adjust to work with a completion_tracker instead of a VEC. * d-lang.c (d_language_defn): Adjust. * disasm.c (disassembler_options_completer): Adjust to work with a completion_tracker instead of a VEC. * f-lang.c (f_make_symbol_completion_list): Rename to ... (f_collect_symbol_completion_matches): ... this. Adjust to work with a completion_tracker instead of a VEC. (f_language_defn): Adjust. * go-lang.c (go_language_defn): Adjust. * guile/scm-cmd.c (cmdscm_add_completion, cmdscm_completer): Adjust to work with a completion_tracker instead of a VEC. * infrun.c (handle_completer): Likewise. * interps.c (interpreter_completer): Likewise. * interps.h (interpreter_completer): Likewise. * language.c (unknown_language_defn, auto_language_defn) (local_language_defn): Adjust. * language.h (language_defn::la_make_symbol_completion_list): Rename to ... (language_defn::la_collect_symbol_completion_matches): ... this and adjust to work with a completion_tracker instead of a VEC. * m2-lang.c (m2_language_defn): Adjust. * objc-lang.c (objc_language_defn): Adjust. * opencl-lang.c (opencl_language_defn): Adjust. * p-lang.c (pascal_language_defn): Adjust. * python/py-cmd.c (cmdpy_completer_helper): Handle NULL word. (cmdpy_completer_handle_brkchars, cmdpy_completer): Adjust to work with a completion_tracker. * rust-lang.c (rust_language_defn): Adjust. * symtab.c (free_completion_list, do_free_completion_list) (return_val, completion_tracker): Delete. (completion_list_add_name, completion_list_add_symbol) (completion_list_add_msymbol, completion_list_objc_symbol) (completion_list_add_fields, add_symtab_completions): Add completion_tracker parameter and use it. (default_make_symbol_completion_list_break_on_1): Rename to... (default_collect_symbol_completion_matches_break_on): ... this. Add completion_tracker parameter and use it instead of allocating a completion tracker here. (default_make_symbol_completion_list_break_on): Delete old implementation. (default_make_symbol_completion_list): Delete. (default_collect_symbol_completion_matches): New. (make_symbol_completion_list): Delete. (collect_symbol_completion_matches): New. (make_symbol_completion_type): Rename to ... (collect_symbol_completion_matches_type): ... this. Add completion_tracker parameter and use it instead of VEC. (make_file_symbol_completion_list_1): Rename to... (collect_file_symbol_completion_matches): ... this. Add completion_tracker parameter and use it instead of VEC. (make_file_symbol_completion_list): Delete. (add_filename_to_list): Use completion_list instead of a VEC. (add_partial_filename_data::list): Now a completion_list. (make_source_files_completion_list): Work with a completion_list instead of a VEC. * symtab.h: Include "completer.h". (default_make_symbol_completion_list_break_on) (default_make_symbol_completion_list, make_symbol_completion_list) (make_symbol_completion_type, make_file_symbol_completion_list) (make_source_files_completion_list): Delete. (default_collect_symbol_completion_matches_break_on) (default_collect_symbol_completion_matches) (collect_symbol_completion_matches) (collect_symbol_completion_matches_type) (collect_file_symbol_completion_matches) (make_source_files_completion_list): New. * top.c (init_main): Don't install a rl_completion_entry_function hook. Install a rl_attempted_completion_function hook instead. * tui/tui-layout.c (layout_completer): Adjust to work with a completion_tracker. * tui/tui-regs.c (tui_reggroup_completer): * tui/tui-win.c (window_name_completer, focus_completer) (winheight_completer): Adjust to work with a completion_tracker. * value.c: Include "completer.h". (complete_internalvar): Adjust to work with a completion_tracker. * value.h (complete_internalvar): Likewise.
2017-07-17 15:45:59 +02:00
rl_attempted_completion_function = gdb_rl_attempted_completion_function;
-Wwrite-strings: Constify word break character arrays -Wwrite-strings flags several cases of missing casts around initializations like: static char *gdb_completer_command_word_break_characters = " \t\n!@#$%^&*()+=|~`}{[]\"';:?/>.<,"; Obviously these could/should be const. However, while at it, there's no need for these variables to be pointers instead of arrays. They are never changed to point to anything else. Unfortunately, readline's rl_completer_word_break_characters is "char *", not "const char *". So we always need a cast somewhere. The approach taken here is to add a new set_rl_completer_word_break_characters function that becomes the only place that writes to rl_completer_word_break_characters, and thus the single place that needs the cast. gdb/ChangeLog: 2017-04-05 Pedro Alves <palves@redhat.com> * ada-lang.c (ada_completer_word_break_characters): Now a const array. (ada_get_gdb_completer_word_break_characters): Constify. * completer.c (gdb_completer_command_word_break_characters) (gdb_completer_file_name_break_characters) (gdb_completer_quote_characters): Now const arrays. (get_gdb_completer_quote_characters): Constify. (set_rl_completer_word_break_characters): New function. (set_gdb_completion_word_break_characters) (complete_line_internal): Use it. * completer.h (get_gdb_completer_quote_characters): Constify. (set_rl_completer_word_break_characters): Declare. * f-lang.c (f_word_break_characters): Constify. * language.c (default_word_break_characters): Constify. * language.h (language_defn::la_word_break_characters): Constify. (default_word_break_characters): Constify. * top.c (init_main): Use set_rl_completer_word_break_characters.
2017-04-05 20:21:34 +02:00
set_rl_completer_word_break_characters (default_word_break_characters ());
2000-12-01 Fernando Nasser <fnasser@redhat.com> * cli/cli-decode.c: New file. Handle lists of commands, their decoding and documentation. (add_cmd, deprecate_cmd, add_abbrev_cmd, add_alias_cmd, add_prefix_cmd, add_abbrev_prefix_cmd, not_just_help_class_command, empty_sfunc, add_set_cmd, add_set_enum_cmd, add_set_auto_boolean_cmd, add_show_from_set, delete_cmd, apropos_cmd, help_cmd, help_list, help_all, print_doc_line, help_cmd_list, find_cmd, lookup_cmd_1, undef_cmd_error, lookup_cmd, deprecated_cmd_warning, lookup_cmd_composition, complete_on_cmdlist, complete_on_enum): Moved here from command.c. (add_info, add_info_alias, add_com, add_com_alias): Moved here from top.c. * cli/cli-decode.h: Definitions/declarations for the above. * cli/cli-cmds.c: New file. GDB CLI commands. (error_no_arg, info_command, show_command, help_command, show_version, quit_command, pwd_command, cd_command, echo_command, shell_escape, make_command, show_user, set_debug, show_debug, init_cmd_lists): Moved here from top.c. (apropos_command): Moved here from command.c. (complete_command, source_command): Moved here (part) from top.c. (is_complete_command): New function. Checks if a command is the "complete" command. (init_cli_cmds): New function. Add commands to the CLI (from code previously in top.c. * cli/cli-cmds.h: Definitions/declarations for the above. * cli/cli-script.c: New file. GDB CLI command scripting. (build_command_line, get_command_line, print_command_lines, print_command_line, execute_user_command, execute_control_command, while_command, if_command, arg_cleanup, setup_user_args, locate_arg, insert_args, realloc_body_list, read_next_line, recurse_read_control_structure, read_command_lines, free_command_lines, do_free_command_lines_cleanup, make_cleanup_free_command_lines, validate_comname, user_defined_command, define_command, document_command, source_cleanup_lines, do_fclose_cleanup, show_user_1): Moved here from top.c. (script_from_file): New function. Implements execution of a script contained in a file (part of code for the source_command() that used to exist in top.c). * cli/cli-script.h: Definitions/declarations for the above. * cli/cli-setshow.c: New file. Handle set and show GDB CLI commands. (parse_auto_binary_operation, parse_binary_operation, do_setshow_command, cmd_show_list): Moved here from command.c. * cli/cli-setshow.h: Definitions/declarations for the above. * top.c: Remove all CLI code, except the command loop. (gdb_init): Call init_cli_cmds(). * command.c: Remove obsolete file. * command.h: Mark as DEPRECATED. * gdbcmd.h: Ditto. * call-cmds.h: Ditto. * Makefile.in (SFILES): Remove command.c. (COMMON_OBS): Remove command.o. (command.o): Remove obsolete target. (cli_decode_h, cli_cmds_h, cli_script_h, cli_setshow_h): New macros. Refer to CLI header files. (cli-decode.o, cli-cmds.o, cli-setshow.o, cli-script.o): New targets. (SUBDIR_CLI_OBS, SUBDIR_CLI_SRCS, SUBDIR_CLI_DEPS, SUBDIR_CLI_INITS, SUBDIR_CLI_LDFLAGS, SUBDIR_CLI_CFLAGS, SUBDIR_CLI_ALL, SUBDIR_CLI_CLEAN, SUBDIR_CLI_INSTALL, SUBDIR_CLI_UNINSTALL): New macros for new cli subdirectory. * configure.in (enable_gdbcli): New option. Include the CLI in the executable (cannot be disabled yet). (CONFIG_OBS, CONFIG_DEPS, CONFIG_SRCS, CONFIG_INITS, ENABLE_CFLAGS, CONFIG_ALL, CONFIG_CLEAN, CONFIG_INSTALL, CONFIG_UNINSTALL): Add the corresponding SUBDIR_CLI_* macros if CLI requested. * configure: Regenerate.
2000-12-01 19:01:38 +01:00
rl_completer_quote_characters = get_gdb_completer_quote_characters ();
Unify CLI/TUI interface to readline tab completion. This copies a lot of code from readline, but this is temporary. Readline currently doesn't export what we need. The plan is to have something that has been working for awhile, and then we'll have a complete story to present to the readline maintainers. gdb/ChangeLog: * cli-out.c: #include completer.h, readline/readline.h. (cli_mld_crlf, cli_mld_putch, cli_mld_puts): New functions. (cli_mld_flush, cld_mld_erase_entire_line): Ditto. (cli_mld_beep, cli_mld_read_key, cli_display_match_list): Ditto. * cli-out.h (cli_display_match_list): Declare. * completer.c (MB_INVALIDCH, MB_NULLWCH): New macros. (ELLIPSIS_LEN): Ditto. (gdb_get_y_or_n, gdb_display_match_list_pager): New functions. (gdb_path_isdir, gdb_printable_part, gdb_fnwidth): Ditto. (gdb_fnprint, gdb_print_filename): Ditto. (gdb_complete_get_screenwidth, gdb_display_match_list_1): Ditto. (gdb_display_match_list): Ditto. * completer.h (mld_crlf_ftype, mld_putch_ftype): New typedefs. (mld_puts_ftype, mld_flush_ftype, mld_erase_entire_line_ftype): Ditto. (mld_beep_ftype, mld_read_key_ftype): Ditto. (match_list_displayer): New struct. (gdb_display_match_list): Declare. * top.c (init_main): Set rl_completion_display_matches_hook. * tui/tui-io.c: #include completer.h. (printable_part, PUTX, print_filename, get_y_or_n): Delete. (tui_mld_crlf, tui_mld_putch, tui_mld_puts): New functions. (tui_mld_flush, tui_mld_erase_entire_line, tui_mld_beep): Ditto. (tui_mld_getc, tui_mld_read_key): Ditto. (tui_rl_display_match_list): Rewrite. (tui_handle_resize_during_io): New arg for_completion. All callers updated.
2015-01-31 23:11:54 +01:00
rl_completion_display_matches_hook = cli_display_match_list;
1999-06-21 15:27:42 +02:00
rl_readline_name = "gdb";
rl_terminal_name = getenv ("TERM");
1999-06-21 15:27:42 +02:00
/* The name for this defun comes from Bash, where it originated.
15 is Control-o, the same binding this function has in Bash. */
rl_add_defun ("operate-and-get-next", gdb_rl_operate_and_get_next, 15);
add_setshow_string_cmd ("prompt", class_support,
&top_prompt,
Make first and last lines of 'command help documentation' consistent. With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise.
2019-06-09 11:16:20 +02:00
_("Set gdb's prompt."),
_("Show gdb's prompt."),
NULL, NULL,
show_prompt,
&setlist, &showlist);
1999-06-21 15:27:42 +02:00
add_com ("dont-repeat", class_support, dont_repeat_command, _("\
2011-01-05 Michael Snyder <msnyder@vmware.com> * addrmap.c: Shorten lines of >= 80 columns. * arch-utils.c: Ditto. * arch-utils.h: Ditto. * ax-gdb.c: Ditto. * ax-general.c: Ditto. * bcache.c: Ditto. * blockframe.c: Ditto. * breakpoint.c: Ditto. * buildsym.c: Ditto. * c-lang.c: Ditto. * c-typeprint.c: Ditto. * charset.c: Ditto. * coffread.c: Ditto. * command.h: Ditto. * corelow.c: Ditto. * cp-abi.c: Ditto. * cp-namespace.c: Ditto. * cp-support.c: Ditto. * dbug-rom.c: Ditto. * dbxread.c: Ditto. * defs.h: Ditto. * dfp.c: Ditto. * dfp.h: Ditto. * dictionary.c: Ditto. * disasm.c: Ditto. * doublest.c: Ditto. * dwarf2-frame.c: Ditto. * dwarf2expr.c: Ditto. * dwarf2loc.c: Ditto. * dwarf2read.c: Ditto. * elfread.c: Ditto. * eval.c: Ditto. * event-loop.c: Ditto. * event-loop.h: Ditto. * exceptions.h: Ditto. * exec.c: Ditto. * expprint.c: Ditto. * expression.h: Ditto. * f-lang.c: Ditto. * f-valprint.c: Ditto. * findcmd.c: Ditto. * frame-base.c: Ditto. * frame-unwind.c: Ditto. * frame-unwind.h: Ditto. * frame.c: Ditto. * frame.h: Ditto. * gcore.c: Ditto. * gdb-stabs.h: Ditto. * gdb_assert.h: Ditto. * gdb_dirent.h: Ditto. * gdb_obstack.h: Ditto. * gdbcore.h: Ditto. * gdbtypes.c: Ditto. * gdbtypes.h: Ditto. * inf-ttrace.c: Ditto. * infcall.c: Ditto. * infcmd.c: Ditto. * inflow.c: Ditto. * infrun.c: Ditto. * inline-frame.h: Ditto. * language.c: Ditto. * language.h: Ditto. * libunwind-frame.c: Ditto. * libunwind-frame.h: Ditto. * linespec.c: Ditto. * linux-nat.c: Ditto. * linux-nat.h: Ditto. * linux-thread-db.c: Ditto. * machoread.c: Ditto. * macroexp.c: Ditto. * macrotab.c: Ditto. * main.c: Ditto. * maint.c: Ditto. * mdebugread.c: Ditto. * memattr.c: Ditto. * minsyms.c: Ditto. * monitor.c: Ditto. * monitor.h: Ditto. * objfiles.c: Ditto. * objfiles.h: Ditto. * osabi.c: Ditto. * p-typeprint.c: Ditto. * p-valprint.c: Ditto. * parse.c: Ditto. * printcmd.c: Ditto. * proc-events.c: Ditto. * procfs.c: Ditto. * progspace.c: Ditto. * progspace.h: Ditto. * psympriv.h: Ditto. * psymtab.c: Ditto. * record.c: Ditto. * regcache.c: Ditto. * regcache.h: Ditto. * remote-fileio.c: Ditto. * remote.c: Ditto. * ser-mingw.c: Ditto. * ser-tcp.c: Ditto. * ser-unix.c: Ditto. * serial.c: Ditto. * serial.h: Ditto. * solib-frv.c: Ditto. * solib-irix.c: Ditto. * solib-osf.c: Ditto. * solib-pa64.c: Ditto. * solib-som.c: Ditto. * solib-sunos.c: Ditto. * solib-svr4.c: Ditto. * solib-target.c: Ditto. * solib.c: Ditto. * somread.c: Ditto. * source.c: Ditto. * stabsread.c: Ditto. * stabsread.c: Ditto. * stack.c: Ditto. * stack.h: Ditto. * symfile-mem.c: Ditto. * symfile.c: Ditto. * symfile.h: Ditto. * symmisc.c: Ditto. * symtab.c: Ditto. * symtab.h: Ditto. * target-descriptions.c: Ditto. * target-memory.c: Ditto. * target.c: Ditto. * target.h: Ditto. * terminal.h: Ditto. * thread.c: Ditto. * top.c: Ditto. * tracepoint.c: Ditto. * tracepoint.h: Ditto. * ui-file.c: Ditto. * ui-file.h: Ditto. * ui-out.h: Ditto. * user-regs.c: Ditto. * user-regs.h: Ditto. * utils.c: Ditto. * valarith.c: Ditto. * valops.c: Ditto. * valprint.c: Ditto. * valprint.h: Ditto. * value.c: Ditto. * varobj.c: Ditto. * varobj.h: Ditto. * vec.h: Ditto. * xcoffread.c: Ditto. * xcoffsolib.c: Ditto. * xcoffsolib.h: Ditto. * xml-syscall.c: Ditto. * xml-tdesc.c: Ditto.
2011-01-05 23:22:53 +01:00
Don't repeat this command.\nPrimarily \
used inside of user-defined commands that should not be repeated when\n\
hitting return."));
1999-06-21 15:27:42 +02:00
add_setshow_boolean_cmd ("editing", class_support,
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
&set_editing_cmd_var, _("\
Set editing of command lines as they are typed."), _("\
Show editing of command lines as they are typed."), _("\
1999-06-21 15:27:42 +02:00
Use \"on\" to enable the editing, and \"off\" to disable it.\n\
Without an argument, command line editing is enabled. To edit, use\n\
EMACS-like or VI-like commands like control-P or ESC."),
Make command line editing (use of readline) be per UI Due to the way that readline's API works (based on globals), we can only have one instance of readline in a process. So the goal of this patch is to only allow editing in the main UI, and make sure that only one UI calls into readline. Some MI paths touch readline variables currently, which is bad as that is changing variables that matter for the main console UI. This patch fixes those. This actually fixes a nasty bug -- starting gdb in MI mode ("gdb -i=mi"), and then doing "set editing on" crashes GDB, because MI is not prepared to use readline: set editing on &"set editing on\n" =cmd-param-changed,param="editing",value="on" ^done (gdb) p 1 readline: readline_callback_read_char() called with no handler! Aborted (core dumped) The fix for that was to add an interp_proc method to query the interpreter whether it actually supports editing. New test included. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * cli/cli-interp.c: Include cli-interp.h and event-top.h. (cli_interpreter_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler here. (cli_interpreter_supports_command_editing): New function. (cli_interp_procs): Install it. * cli/cli-interp.h: New file. * event-top.c (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. (change_line_handler): Add parameter 'editing', and use it. Bail early if the interpreter doesn't support editing. Don't touch readline state if editing is off. (gdb_rl_callback_handler_remove, gdb_rl_callback_handler_install) (gdb_rl_callback_handler_reinstall): Assert the current UI is the main UI. (display_gdb_prompt): Don't call gdb_rl_callback_handler_remove if not using readline. Check whether the current UI is using command editing instead of checking the async_command_editing_p global. (set_async_editing_command): Delete. (gdb_setup_readline): Add 'editing' parameter. Only allow editing on the main UI. Don't touch readline state if editing is off. (gdb_disable_readline): Don't touch readline state if editing is off. * event-top.h (gdb_setup_readline): Add 'int' parameter. (set_async_editing_command): Delete declaration. (change_line_handler, command_line_handler): Declare. (async_command_editing_p): Rename to ... (set_editing_cmd_var): ... this. * infrun.c (reinstall_readline_callback_handler_cleanup): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. * interps.c (interp_supports_command_editing): New function. * interps.h (interp_supports_command_editing_ftype): New typedef. (struct interp_procs) <supports_command_editing_proc>: New field. (interp_supports_command_editing): Declare. * mi/mi-interp.c (mi_interpreter_resume): Pass 0 to gdb_setup_readline. Don't clear the async_command_editing_p global. Update comments. * top.c (gdb_readline_wrapper_line, gdb_readline_wrapper): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. Don't touch readline state if editing is off. (undo_terminal_modifications_before_exit): Switch to the main UI. Unconditionally call gdb_disable_readline. (set_editing): New function. (show_async_command_editing_p): Rename to ... (show_editing): ... this. Show the state of the current UI. (_initialize_top): Adjust. * top.h (struct ui) <command_editing>: New field. * tui/tui-interp.c: Include cli/cli-interp.h. (tui_resume): Pass 1 to gdb_setup_readline. Set the UI's input_handler. (tui_interp_procs): Install cli_interpreter_supports_command_editing. * tui/tui-io.c (tui_getc): Check whether the current UI has editing enabled rather than checking the async_command_editing_p global. gdb/testsuite/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> PR mi/20034 * gdb.mi/mi-editing.exp: New file.
2016-06-21 02:11:48 +02:00
set_editing,
show_editing,
&setlist, &showlist);
add_setshow_boolean_cmd ("save", no_class, &write_history_p, _("\
Set saving of the history record on exit."), _("\
Show saving of the history record on exit."), _("\
1999-06-21 15:27:42 +02:00
Use \"on\" to enable the saving, and \"off\" to disable it.\n\
Without an argument, saving is enabled."),
NULL,
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
show_write_history_p,
&sethistlist, &showhistlist);
1999-06-21 15:27:42 +02:00
Fix PR gdb/17820 This patch is a comprehensive fix for PR 17820 which reports that using "set history size unlimited" inside one's gdbinit file doesn't really work. There are three small changes in this patch. The most important change this patch makes is to decode the argument of the "size" subcommand using add_setshow_zuinteger_unlimited_cmd() instead of using add_setshow_uinteger_cmd(). The new decoder takes an int * and maps unlimited to -1 whereas the old decoder takes an unsigned int * and maps unlimited to UINT_MAX. Using the new decoder simplifies our handling of unlimited and makes it easier to interface with readline which itself expects a signed-int history size. The second change is the factoring of the [stifle|unstifle]_history logic into a common function which is now used by both init_history() and set_history_size_command(). This is technically the change that fixes the PR itself. Thirdly, this patch initializes history_size_setshow_var to -2 to mean that the variable has not been set yet. Now init_history() tests for -2 instead of 0 to determine whether to give the variable a default value. This means that having "set history size 0" in one's gdbinit file will actually keep the history size at 0 and not reset it to 256. gdb/ChangeLog: PR gdb/17820 * top.c (history_size_setshow_var): Change type to signed. Initialize to -2. Update documentation. (set_readline_history_size): Define. (set_history_size_command): Use it. Remove logic for handling out-of-range sizes. (init_history): Use set_readline_history_size(). Test for a value of -2 instead of 0 when determining whether to set a default history size. (init_main): Decode the argument of the "size" command as a zuinteger_unlimited. gdb/testsuite/ChangeLog: PR gdb/17820 * gdb.base/gdbinit-history.exp: New test. * gdb.base/gdbinit-history/unlimited/.gdbinit: New file. * gdb.base/gdbinit-history/zero/.gdbinit: New file.
2015-04-26 20:13:59 +02:00
add_setshow_zuinteger_unlimited_cmd ("size", no_class,
&history_size_setshow_var, _("\
Make first and last lines of 'command help documentation' consistent. With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise.
2019-06-09 11:16:20 +02:00
Set the size of the command history."), _("\
Show the size of the command history."), _("\
This is the number of previous commands to keep a record of.\n\
Accept "set foo unlimited" in integer/uinteger/zuinteger_unlimited commands. Currently, several commands take "0" or "-1" to mean "unlimited". "show" knows when to print "unlimited": (gdb) show height Number of lines gdb thinks are in a page is 45. (gdb) set height 0 (gdb) show height Number of lines gdb thinks are in a page is unlimited. However, the user can't herself specify "unlimited" directly: (gdb) set height unlimited No symbol table is loaded. Use the "file" command. (gdb) This patch addresses that, by adjusting the set handler for all integer/uinteger/zuinteger_unlimited commands to accept literal "unlimited". It also installs a completer. Presently, we complete on symbols by default, and at <http://sourceware.org/ml/gdb-patches/2013-03/msg00864.html> I've shown a WIP prototype that tried to keep that half working in these commands. In the end, it turned out to be more complicated than justifiable, IMO. It's super rare to want to pass the value of a variable/symbol in the program to a GDB set/show knob. That'll still work, it's just that we won't assist with completion anymore. This patch just sticks with the simple, and completes on "unlimited", and nothing else. This simplification means that "set he<tab><tab>" is all it takes to get to: "set height unlimited" The patch then goes through all integer/uinteger/zuinteger_unlimited commands in the tree, and updates both the online help and the manual to mention that "unlimited" is accepted in addition to 0/-1. In the cases where the command had no online help text at all, this adds it. I've tried to make the texts read in a way that "unlimited" is suggested before "0" or "-1" is. Tested on x86_64 Fedora 17. gdb/ 2013-04-10 Pedro Alves <palves@redhat.com> * cli/cli-decode.c (integer_unlimited_completer): New function. (add_setshow_integer_cmd, add_setshow_uinteger_cmd) (add_setshow_zuinteger_unlimited_cmd): Install the "unlimited" completer. * cli/cli-setshow.c: Include "cli/cli-utils.h". (is_unlimited_literal): New function. (do_set_command): Handle literal "unlimited" arguments. * frame.c (_initialize_frame) <set backtrace limit>: Document "unlimited". * printcmd.c (_initialize_printcmd) <set print max-symbolic-offset>: Add help text. * record-full.c (_initialize_record_full) <set record full insn-number-max>: Likewise. * record.c (_initialize_record) <set record instruction-history-size, set record function-call-history-size>: Add help text. * ser-tcp.c (_initialize_ser_tcp) <set tcp connect-timeout>: Add help text. * tracepoint.c (_initialize_tracepoint) <set trace-buffer-size>: Likewise. * source.c (_initialize_source) <set listsize>: Add help text. * utils.c (initialize_utils) <set height, set width>: Likewise. <set pagination>: Mention "set height unlimited". * valprint.c (_initialize_valprint) <set print elements, set print repeats>: Document "unlimited". gdb/doc/ 2013-04-10 Pedro Alves <palves@redhat.com> * gdb.texinfo (Process Record and Replay): Document that "set record full insn-number-max", "set record instruction-history-size" and "set record function-call-history-size" accept "unlimited". (Backtrace): Document that "set backtrace limit" accepts "unlimited". (List): Document that "set listsize" accepts "unlimited". (Print Settings)" Document that "set print max-symbolic-offset", "set print elements" and "set print repeats" accept "unlimited". (Starting and Stopping Trace Experiments): Document that "set trace-buffer-size" accepts "unlimited". (Remote Configuration): Document that "set tcp connect-timeout" accepts "unlimited". (Command History): Document that "set history size" accepts "unlimited". (Screen Size): Document that "set height" and "set width" accepts "unlimited". Adjust "set pagination"'s description to suggest "set height unlimited" instead of "set height 0". gdb/testsuite/ 2013-04-10 Pedro Alves <palves@redhat.com> * gdb.base/completion.exp: Test "set height", "set listsize" and "set trace-buffer-size" completion. * gdb.base/setshow.exp: Test "set height unlimited". * gdb.trace/trace-buffer-size.exp: Test "set trace-buffer-size unlimited".
2013-04-10 17:11:12 +02:00
If set to \"unlimited\", the number of commands kept in the history\n\
list is unlimited. This defaults to the value of the environment\n\
variable \"GDBHISTSIZE\", or to 256 if this variable is not set."),
set_history_size_command,
show_history_size,
&sethistlist, &showhistlist);
2015-06-03 04:49:15 +02:00
add_setshow_zuinteger_unlimited_cmd ("remove-duplicates", no_class,
&history_remove_duplicates, _("\
Set how far back in history to look for and remove duplicate entries."), _("\
Show how far back in history to look for and remove duplicate entries."), _("\
If set to a nonzero value N, GDB will look back at the last N history entries\n\
and remove the first history entry that is a duplicate of the most recent\n\
entry, each time a new history entry is added.\n\
If set to \"unlimited\", this lookbehind is unbounded.\n\
Only history entries added during this session are considered for removal.\n\
If set to 0, removal of duplicate history entries is disabled.\n\
By default this option is set to 0."),
NULL,
show_history_remove_duplicates,
&sethistlist, &showhistlist);
gdb: Allow GDB to _not_ load a previous command history This commit aims to give a cleaner mechanism by which the user can prevent GDB from trying to load any previous command history. Currently the user can change the path to the history file, either using a command line flag, or by setting the GDBHISTFILE environment variable, and if the path is set to a non-existent file, then obviously GDB wont load any command history. However, this feels like a bit of a bodge, I'd like to add an official mechanism by which we can disable command history loading. Why would we want to prevent command history loading? The specific use case I have is GDB starting with a CWD that is a network mounted directory, and there is no command history present. Still GDB will access the network in order to check for the file. In my particular use case I'm actually starting a large number of GDB instances in parallel, all in the same network mounted directory, the large number of network accesses looking for this file introduces a noticeable delay at GDB startup. The approach I'm proposing here is a slight adjustment to the current rules for setting up the history filename. Currently, if a user does this, they see an error: (gdb) set history filename Argument required (filename to set it to.). However, if a user does this: $ GDBHISTFILE= gdb --quiet (gdb) set history save on (gdb) q warning: Could not rename -gdb18416~ to : No such file or directory So, we already have a bug in this area. My plan is to allow the empty filename to be accepted, and for this to mean, neither load, nor save the command history. This does mean that we now have two mechanisms to prevent saving the command history: (gdb) set history filename or (gdb) set history save off But the only way to prevent loading the command history is to set the filename to the empty string _before_ you get to a GDB prompt, either using a command line option, or the environment variable. I've updated some of the show commands, for example this session: (gdb) set history filename (gdb) show history filename There is no filename currently set for recording the command history in. (gdb) show history save Saving of the history record on exit is off. (gdb) set history save on (gdb) show history save Saving of the history is disabled due to the value of 'history filename'. (gdb) set history filename /tmp/hist (gdb) show history save Saving of the history record on exit is on. I've updated the manual, and added some tests. gdb/ChangeLog: * NEWS: Mention new behaviour of the history filename. * top.c (write_history_p): Add comment. (show_write_history_p): Add header comment, give a different message when history writing is on, but the history filename is empty. (history_filename): Add comment. (history_filename_empty): New function. (show_history_filename): Add header comment, give a different message when the filename is empty. (init_history): Compare history_filename against nullptr, and only read history if the filename is not empty. (set_history_filename): Add header comment, and only make non-empty filenames absolute. (init_main): Make the filename argument to 'set history filename' optional. gdb/doc/ChangeLog: * gdb.texinfo (Command History): Extend description for GDBHISTFILE and GDBHISTSIZE, add detail about the filename for 'set history filename' being optional. Describe the effect of an empty history filename on 'set history save on'. gdb/testsuite/ChangeLog: * gdb.base/default.exp: Remove test of 'set history filename'. * gdb.base/gdbinit-history.exp: Add tests for setting the history filename to the empty string. * lib/gdb.exp (gdb_init): Unset environment variables GDBHISTFILE and GDBHISTSIZE. Change-Id: Ia586e4311182fac99113b60f11ef8a11fbd5450b
2020-01-22 19:21:58 +01:00
add_setshow_optional_filename_cmd ("filename", no_class, &history_filename, _("\
Make first and last lines of 'command help documentation' consistent. With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise.
2019-06-09 11:16:20 +02:00
Set the filename in which to record the command history."), _("\
Show the filename in which to record the command history."), _("\
(the list of previous commands of which a record is kept)."),
set_history_filename,
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
show_history_filename,
&sethistlist, &showhistlist);
1999-06-21 15:27:42 +02:00
add_setshow_boolean_cmd ("confirm", class_support, &confirm, _("\
Set whether to confirm potentially dangerous operations."), _("\
Show whether to confirm potentially dangerous operations."), NULL,
NULL,
show_confirm,
&setlist, &showlist);
1999-06-21 15:27:42 +02:00
add_setshow_zinteger_cmd ("annotate", class_obscure, &annotation_level, _("\
Set annotation_level."), _("\
Show annotation_level."), _("\
1999-06-21 15:27:42 +02:00
0 == normal; 1 == fullname (for use when running under emacs)\n\
2 == output annotated suitably for use by programs that control GDB."),
NULL,
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
show_annotation_level,
&setlist, &showlist);
add_setshow_boolean_cmd ("exec-done-display", class_support,
&exec_done_display_p, _("\
Set notification of completion for asynchronous execution commands."), _("\
Show notification of completion for asynchronous execution commands."), _("\
Use \"on\" to enable the notification, and \"off\" to disable it."),
NULL,
2005-02-24 Andrew Cagney <cagney@gnu.org> Add show_VARIABLE functions, update add_setshow call. * varobj.c (_initialize_varobj, show_varobjdebug): Add and update. * valprint.c (_initialize_valprint, show_print_max) (show_stop_print_at_null, show_repeat_count_threshold) (show_prettyprint_structs, show_unionprint) (show_prettyprint_arrays, show_addressprint, show_input_radix) (show_output_radix): Ditto. * valops.c (_initialize_valops, show_overload_resolution): Ditto. * utils.c (initialize_utils, show_chars_per_line) (show_lines_per_page, show_demangle, show_pagination_enabled) (show_sevenbit_strings, show_asm_demangle): Ditto * tui/tui-win.c (_initialize_tui_win, show_tui_border_kind) (show_tui_border_mode, show_tui_active_border_mode): Ditto. * top.c (init_main, show_new_async_prompt) (show_async_command_editing_p, show_write_history_p) (show_history_size, show_history_filename, show_caution) (show_annotation_level, init_main): Ditto. * target.c (initialize_targets, show_targetdebug) (show_trust_readonly): Ditto. * symfile.c (_initialize_symfile, show_symbol_reloading) (show_ext_args, show_download_write_size) (show_debug_file_directory): Ditto. * source.c (_initialize_source, show_lines_to_list): Ditto. * solib.c (_initialize_solib, show_auto_solib_add) (show_solib_search_path): Ditto. * p-valprint.c (_initialize_pascal_valprint) (show_pascal_static_field_print): Ditto. * printcmd.c (_initialize_printcmd, show_max_symbolic_offset) (show_print_symbol_filename): Add and update. * parse.c (_initialize_parse, show_expressiondebug): Dito. * observer.c (_initialize_observer, show_observer_debug): Dito. * maint.c (_initialize_maint_cmds, show_watchdog) (show_maintenance_profile_p): Dito. * linux-nat.c (_initialize_linux_nat, show_debug_linux_nat): Dito. * infrun.c (_initialize_infrun, show_debug_infrun) (show_stop_on_solib_events, show_follow_fork_mode_string) (show_scheduler_mode, show_step_stop_if_no_debug): Ditto. * infcall.c (_initialize_infcall, show_coerce_float_to_double_p) (show_unwind_on_signal_p): Ditto. * gdbtypes.c (build_gdbtypes, show_opaque_type_resolution) (_initialize_gdbtypes, show_overload_debug): Ditto. * gdb-events.c, gdb-events.sh (_initialize_gdb_events) (show_gdb_events_debug): Ditto. * gdbarch.c, gdbarch.sh (show_gdbarch_debug) (_initialize_gdbarch): Ditto. * frame.c (_initialize_frame, show_backtrace_past_main) (show_backtrace_past_entry, show_backtrace_limit) (show_frame_debug): Ditto. * exec.c (_initialize_exec, show_write_files): Ditto. * dwarf2read.c (_initialize_dwarf2_read) (show_dwarf2_max_cache_age): Ditto. * demangle.c (_initialize_demangler) (show_demangling_style_names): Ditto. * dcache.c (_initialize_dcache, show_dcache_enabled_p): Ditto. * cp-valprint.c (show_static_field_print) (_initialize_cp_valprint, show_vtblprint, show_objectprint): Ditto. * corefile.c (_initialize_core, show_gnutarget_string): Ditto. * cli/cli-logging.c (_initialize_cli_logging) (show_logging_overwrite, show_logging_redirect) (show_logging_filename): Ditto. * cli/cli-cmds.c (show_info_verbose, show_history_expansion_p) (init_cli_cmds, show_baud_rate, show_remote_debug) (show_remote_timeout, show_max_user_call_depth): Ditto. * charset.c (show_host_charset_name, show_target_charset_name) (initialize_charset): Ditto. * breakpoint.c (show_can_use_hw_watchpoints) (show_pending_break_support, _initialize_breakpoint): Ditto.
2005-02-24 14:51:36 +01:00
show_exec_done_display_p,
&setlist, &showlist);
add_setshow_filename_cmd ("data-directory", class_maintenance,
&staged_gdb_datadir, _("Set GDB's data directory."),
_("Show GDB's data directory."),
_("\
When set, GDB uses the specified path to search for data files."),
set_gdb_datadir, show_gdb_datadir,
&setlist,
&showlist);
Make stdin be per UI This commit makes each UI have its own "stdin" stream pointer. This is used to determine whether the "from_tty" argument to execute_command, etc. should be true. Related, this commit makes input_from_terminal_p take an UI parameter, and then avoids the gdb_has_a_terminal in it. gdb_has_a_terminal only returns info on gdb's own main/primary terminal (the real stdin). However, the places that call input_from_terminal_p really want to know is whether the command came from an interactive tty. This patch thus renames input_from_terminal_p to input_interactive_p for clarity, and then makes input_interactive_p check for "set interactive" itself, along with ISATTY, instead of calling gdb_has_a_terminal. Actually, quit_force wants to call input_interactive_p _after_ stdin is closed, we can't call ISATTY that late. So instead we save the result of ISATTY in a field of the UI. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * cli/cli-script.c (read_next_line): Adjust to per-UI stdin. (read_command_lines): Use input_interactive_p instead of input_from_terminal_p. * defs.h (struct ui): Forward declare. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this. * event-top.c (stdin_event_handler): Pass 0 as from_tty argument to quit_command. (command_handler): Adjust to per-UI stdin. (handle_line_of_input): Adjust to per-UI stdin and use input_interactive_p instead of ISATTY and input_from_terminal_p. (gdb_readline_no_editing_callback): Adjust to per-UI stdin. (command_line_handler): Always pass true as "from_tty" parameter of handle_line_of_input and execute_command. (async_sigterm_handler): Pass 0 as from_tty argument to quit_command. * inflow.c (interactive_mode, show_interactive_mode): Moved to ... (gdb_has_a_terminal): Don't check interactive_mode here. (_initialize_inflow): Don't install "set interactive-mode" here. * main.c (captured_command_loop): Adjust to per-UI stdin. * mi/mi-interp.c (mi_execute_command_wrapper): Adjust to per-UI stdin. * top.c (new_ui): Save the stdin stream and whether it's a tty. (dont_repeat): Adjust to per-UI stdin. (command_line_input): Adjust to per-UI stdin and to use input_interactive_p. (quit_force): Write history if any UI supports interactive input. (interactive_mode, show_interactive_mode): Move here, from inflow.c. (input_from_terminal_p): Rename to ... (input_interactive_p): ... this, and check the "interactive_mode" global instead of calling gdb_has_a_terminal. (_initialize_top): Install "set interactive-mode" here. * top.h (struct ui) <stdin_stream, input_interactive_p>: New fields. * utils.c (quit): Pass 0 as from_tty argument to quit_force. (defaulted_query): Adjust to per-UI stdin and to use input_interactive_p.
2016-06-21 02:11:54 +02:00
add_setshow_auto_boolean_cmd ("interactive-mode", class_support,
&interactive_mode, _("\
Set whether GDB's standard input is a terminal."), _("\
Show whether GDB's standard input is a terminal."), _("\
If on, GDB assumes that standard input is a terminal. In practice, it\n\
means that GDB should wait for the user to answer queries associated to\n\
commands entered at the command prompt. If off, GDB assumes that standard\n\
input is not a terminal, and uses the default answer to all queries.\n\
If auto (the default), determine which mode to use based on the standard\n\
input settings."),
NULL,
show_interactive_mode,
&setlist, &showlist);
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
c = add_cmd ("new-ui", class_support, new_ui_command, _("\
Make first and last lines of 'command help documentation' consistent. With this patch, the help docs now respect 2 invariants: * The first line of a command help is terminated by a '.' character. * The last character of a command help is not a newline character. Note that the changes for the last invariant were done by Tom, as part of : [PATCH] Remove trailing newlines from help text https://sourceware.org/ml/gdb-patches/2019-06/msg00050.html but some occurrences have been re-introduced since then. Some help docs had to be rephrased/restructured to respect the above invariants. Before this patch, print_doc_line was printing the first line of a command help documentation, but stopping at the first '.' or ',' character. This was giving inconsistent results : * The first line of command helps was sometimes '.' terminated, sometimes not. * The first line of command helps was not always designed to be readable/understandable/unambiguous when stopping at the first '.' or ',' character. This e.g. created the following inconsistencies/problems: < catch exception -- Catch Ada exceptions < catch handlers -- Catch Ada exceptions < catch syscall -- Catch system calls by their names < down-silently -- Same as the `down' command while the new help is: > catch exception -- Catch Ada exceptions, when raised. > catch handlers -- Catch Ada exceptions, when handled. > catch syscall -- Catch system calls by their names, groups and/or numbers. > down-silently -- Same as the `down' command, but does not print anything. Also, the command help doc should not be terminated by a newline character, but this was not respected by all commands. The cli-option -OPT framework re-introduced some occurences. So, the -OPT build help framework was changed to not output newlines at the end of %OPTIONS% replacement. This patch changes the help documentations to ensure the 2 invariants given above. It implied to slightly rephrase or restructure some help docs. Based on the above invariants, print_doc_line (called by 'apropos' and 'help' commands to print the first line of a command help) now outputs the full first line of a command help. This all results in a lot of small changes in the produced help docs. There are less code changes than changes in the help docs, as a lot of docs are produced by some code (e.g. the remote packet usage settings). gdb/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * cli/cli-decode.h (print_doc_line): Add for_value_prefix argument. * cli/cli-decode.c (print_doc_line): Likewise. It now prints the full first line, except when FOR_VALUE_PREFIX. In this case, the trailing '.' is not output, and the first character is uppercased. (print_help_for_command): Update call to print_doc_line. (print_doc_of_command): Likewise. * cli/cli-setshow.c (deprecated_show_value_hack): Likewise. * cli/cli-option.c (append_indented_doc): Do not append newline. (build_help_option): Append newline after first appended_indented_doc only if a second call is done. (build_help): Append 2 new lines before each option, except the first one. * compile/compile.c (_initialize_compile): Add new lines after %OPTIONS%, when not at the end of the help. Change help doc or code producing the help doc to respect the invariants. * maint-test-options.c (_initialize_maint_test_options): Likewise. Also removed the new line after 'Options:', as all other commands do not put an empty line between 'Options:' and the first option. * printcmd.c (_initialize_printcmd): Likewise. * stack.c (_initialize_stack): Likewise. * interps.c (interpreter_exec_cmd): Fix "Usage:" line that was incorrectly telling COMMAND is optional. * ada-lang.c (_initialize_ada_language): Change help doc or code producing the help doc to respect the invariants. * ada-tasks.c (_initialize_ada_tasks): Likewise. * breakpoint.c (_initialize_breakpoint): Likewise. * cli/cli-cmds.c (_initialize_cli_cmds): Likewise. * cli/cli-logging.c (_initialize_cli_logging): Likewise. * cli/cli-setshow.c (_initialize_cli_setshow): Likewise. * cli/cli-style.c (cli_style_option::add_setshow_commands, _initialize_cli_style): Likewise. * corelow.c (core_target_info): Likewise. * dwarf-index-cache.c (_initialize_index_cache): Likewise. * dwarf2read.c (_initialize_dwarf2_read): Likewise. * filesystem.c (_initialize_filesystem): Likewise. * frame.c (_initialize_frame): Likewise. * gnu-nat.c (add_task_commands): Likewise. * infcall.c (_initialize_infcall): Likewise. * infcmd.c (_initialize_infcmd): Likewise. * interps.c (_initialize_interpreter): Likewise. * language.c (_initialize_language): Likewise. * linux-fork.c (_initialize_linux_fork): Likewise. * maint-test-settings.c (_initialize_maint_test_settings): Likewise. * maint.c (_initialize_maint_cmds): Likewise. * memattr.c (_initialize_mem): Likewise. * printcmd.c (_initialize_printcmd): Likewise. * python/lib/gdb/function/strfns.py (_MemEq, _StrLen, _StrEq, _RegEx): Likewise. * ravenscar-thread.c (_initialize_ravenscar): Likewise. * record-btrace.c (_initialize_record_btrace): Likewise. * record-full.c (_initialize_record_full): Likewise. * record.c (_initialize_record): Likewise. * regcache-dump.c (_initialize_regcache_dump): Likewise. * regcache.c (_initialize_regcache): Likewise. * remote.c (add_packet_config_cmd, init_remote_threadtests, _initialize_remote): Likewise. * ser-tcp.c (_initialize_ser_tcp): Likewise. * serial.c (_initialize_serial): Likewise. * skip.c (_initialize_step_skip): Likewise. * source.c (_initialize_source): Likewise. * stack.c (_initialize_stack): Likewise. * symfile.c (_initialize_symfile): Likewise. * symtab.c (_initialize_symtab): Likewise. * target-descriptions.c (_initialize_target_descriptions): Likewise. * top.c (init_main): Likewise. * tracefile-tfile.c (tfile_target_info): Likewise. * tracepoint.c (_initialize_tracepoint): Likewise. * tui/tui-win.c (_initialize_tui_win): Likewise. * utils.c (add_internal_problem_command): Likewise. * valprint.c (value_print_option_defs): Likewise. gdb/testsuite/ChangeLog 2019-08-07 Philippe Waroquiers <philippe.waroquiers@skynet.be> * gdb.base/style.exp: Update tests for help doc new invariants. * gdb.base/help.exp: Likewise.
2019-06-09 11:16:20 +02:00
Create a new UI.\n\
Usage: new-ui INTERPRETER TTY\n\
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
The first argument is the name of the interpreter to run.\n\
Remove trailing newlines from help text I noticed recently that some command had a trailing newline in its "help" output. So, I temporarily hacked cli-decode.c to print something when a new command was installed that had a trailing newline in its help message, and wrote this patch, which removes all the ones I could find this way. (There could still be a few more in *-nat files.) Tested on x86-64 Fedora 29. gdb/ChangeLog 2019-06-11 Tom Tromey <tromey@adacore.com> * infcall.c (_initialize_infcall): Remove trailing newline from help. * user-regs.c (_initialize_user_regs): Remove trailing newline from help. * typeprint.c (_initialize_typeprint): Remove trailing newline from help. * reverse.c (_initialize_reverse): Remove trailing newlines from help. * tracepoint.c (_initialize_tracepoint): Remove trailing newlines from help. * language.c (add_set_language_command): Remove trailing newline from help. * infcmd.c (_initialize_infcmd): Remove trailing newlines from help. * disasm.c (_initialize_disasm): Remove trailing newline from help. * top.c (init_main): Remove trailing newline from help. * interps.c (_initialize_interpreter): Remove trailing newline from help. * btrace.c (_initialize_btrace): Remove trailing newlines from help. * breakpoint.c (_initialize_breakpoint): Remove trailing newline from help. * python/python.c (_initialize_python): Remove trailing newline from help. * spu-tdep.c (_initialize_spu_tdep): Remove trailing newlines from help. * tui/tui-win.c (_initialize_tui_win): Remove trailing newlines from help. Reformat some text. * tui/tui-stack.c (_initialize_tui_stack): Remove trailing newline from help. * tui/tui-layout.c (_initialize_tui_layout): Remove trailing newline from help.
2019-06-04 14:17:09 +02:00
The second argument is the terminal the UI runs on."), &cmdlist);
Add new command to create extra console/mi UIs With all the previous plumbing in place, it's now easy to add a command that actually creates a new console/mi UI. The intended use case is to make it possible and easy for MI frontends to provide a fully featured GDB console to users, with readline support, command line editing, history, etc., just like if gdb was started on the command line. Currently MI frontends have to try to implement all of that theirselves and make use of "-interpreter-exec console ...", which is far from perfect. If you ever tried Eclipse's gdb console window, you'll know what I mean... Instead of trying to multiplex console through MI, this command let's just leverage all the built in readline/editing support already inside gdb. The plan is for the MI frontend to start GDB in regular console mode, running inside a terminal emulator widget embedded in Eclipse (which already exists, for supporting the shell widget; other frontends have similar widgets), and then tell GDB to run a full MI interpreter on an specified input/output device, independent of the console. My original prototype planned to do things the other way around -- start GDB in MI mode, and then start an extra CLI console on separate tty. I handed over that prototype to Marc Khouzam @ Eclipse CDT, and after experimentation and discussion, we ended up concluding that starting GDB in CLI mode instead was both easier and actually also supported an interesting use case -- connect an Eclipse frontend to a GDB that is already running outside Eclipse. The current usage is "new-ui <interpreter> <tty>". E.g., on a terminal run this scriplet: $ cat gdb-client #!/bin/bash reset tty tail -f /dev/null $ gdb-client /dev/pts/15 Now run gdb on another terminal, and tell it to start a MI interpreter on the tty of the other terminal: ... (gdb) new-ui mi /dev/pts/15 New UI allocated Now back to the the gdb-client terminal, we'll get an MI prompt, ready for MI input: /dev/pts/15 =thread-group-added,id="i1" (gdb) You can also start a new UI running a CLI, with: (gdb) new-ui console /dev/pts/15 Though note that this console won't support readline command editing. It works as if "set editing off" was entered. gdb/ChangeLog: 2016-06-21 Pedro Alves <palves@redhat.com> * interps.c (set_top_level_interpreter): New function, factored out from captured_main. (interpreter_completer): Make extern. * interps.h (set_top_level_interpreter, interpreter_completer): New declarations. (captured_main): Use set_top_level_interpreter. * top.c [!O_NOCTTY] (O_NOCTTY): Define as 0. (open_terminal_stream, new_ui_command): New functions. (init_main): Install the "new-ui" command.
2016-06-21 02:11:55 +02:00
set_cmd_completer (c, interpreter_completer);
1999-06-21 15:27:42 +02:00
}
void
gdb_init (char *argv0)
{
Add previous_saved_command_line to allow a command to repeat a previous command. Currently, a previous command can be repeated when the user types an empty line. This is implemented in handle_line_of_input by returning saved_command_line in case an empty line has been input. If we want a command to repeat the previous command, we need to save the previous saved_command_line, as when a command runs, the saved_command_line already contains the current command line of the command being executed. As suggested by Tom, the previous_saved_command_line is made static. At the same time, saved_command_line is also made static. The support functions/variables for the repeat command logic are now all located inside top.c. gdb/ChangeLog 2019-05-31 Philippe Waroquiers <philippe.waroquiers@skynet.be> * top.h (saved_command_line): Remove declaration. * top.c (previous_saved_command_line, previous_repeat_arguments): New variables. (saved_command_line): Make static, define together with other 'repeat variables'. (dont_repeat): Clear repeat_arguments. (repeat_previous, get_saved_command_line, save_command_line): New functions. (gdb_init): Initialize saved_command_line and previous_saved_command_line. * main.c (captured_main_1): Remove saved_command_line initialization. * event-top.c (handle_line_of_input): Update to use the new 'repeat' related functions instead of direct access to saved_command_line. * command.h (repeat_previous, get_saved_command_line, save_command_line): New declarations. (dont_repeat): Add comment.
2019-04-20 14:02:29 +02:00
saved_command_line = xstrdup ("");
previous_saved_command_line = xstrdup ("");
if (pre_init_ui_hook)
pre_init_ui_hook ();
/* Run the init function of each source file. */
#ifdef __MSDOS__
/* Make sure we return to the original directory upon exit, come
what may, since the OS doesn't do that for us. */
make_final_cleanup (do_chdir_cleanup, xstrdup (current_directory));
#endif
init_cmd_lists (); /* This needs to be done first. */
init_page_info ();
/* Here is where we call all the _initialize_foo routines. */
initialize_all_files ();
2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> Add base multi-executable/process support to GDB. gdb/ * Makefile.in (SFILES): Add progspace.c. (COMMON_OBS): Add progspace.o. * progspace.h: New. * progspace.c: New. * breakpoint.h (struct bp_target_info) <placed_address_space>: New field. (struct bp_location) <pspace>: New field. (struct breakpoint) <pspace>: New field. (bpstat_stop_status, breakpoint_here_p) (moribund_breakpoint_here_p, breakpoint_inserted_here_p) (regular_breakpoint_inserted_here_p) (software_breakpoint_inserted_here_p, breakpoint_thread_match) (set_default_breakpoint): Adjust prototypes. (remove_breakpoints_pid, breakpoint_program_space_exit): Declare. (insert_single_step_breakpoint, deprecated_insert_raw_breakpoint): Adjust prototypes. * breakpoint.c (executing_startup): Delete. (default_breakpoint_sspace): New. (breakpoint_restore_shadows): Skip if the address space doesn't match. (update_watchpoint): Record the frame's program space in the breakpoint location. (insert_bp_location): Record the address space in target_info. Adjust to pass the symbol space to solib_name_from_address. (breakpoint_program_space_exit): New. (insert_breakpoint_locations): Switch the symbol space and thread when inserting breakpoints. Don't insert breakpoints in a vfork parent waiting for vfork done if we're not attached to the vfork child. (remove_breakpoints_pid): New. (reattach_breakpoints): Switch to a thread of PID. Ignore breakpoints of other symbol spaces. (create_internal_breakpoint): Store the symbol space in the sal. (create_longjmp_master_breakpoint): Iterate over all symbol spaces. (update_breakpoints_after_exec): Ignore breakpoints for other symbol spaces. (remove_breakpoint): Rename to ... (remove_breakpoint_1): ... this. Pass the breakpoints symbol space to solib_name_from_address. (remove_breakpoint): New. (mark_breakpoints_out): Ignore breakpoints from other symbol spaces. (breakpoint_init_inferior): Ditto. (breakpoint_here_p): Add an address space argument and adjust to use breakpoint_address_match. (moribund_breakpoint_here_p): Ditto. (regular_breakpoint_inserted_here_p): Ditto. (breakpoint_inserted_here_p): Ditto. (software_breakpoint_inserted_here_p): Ditto. (breakpoint_thread_match): Ditto. (bpstat_check_location): Ditto. (bpstat_stop_status): Ditto. (print_breakpoint_location): If there's a location to print, switch the current symbol space. (print_one_breakpoint_location): Add `allflag' argument. (print_one_breakpoint): Ditto. Adjust. (do_captured_breakpoint_query): Adjust. (breakpoint_1): Adjust. (breakpoint_has_pc): Also match the symbol space. (describe_other_breakpoints): Add a symbol space argument and adjust. (set_default_breakpoint): Add a symbol space argument. Set default_breakpoint_sspace. (breakpoint_address_match): New. (check_duplicates_for): Add an address space argument, and adjust. (set_raw_breakpoint): Record the symbol space in the location and in the breakpoint. (set_longjmp_breakpoint): Skip longjmp master breakpoints from other symbol spaces. (remove_thread_event_breakpoints, remove_solib_event_breakpoints) (disable_breakpoints_in_shlibs): Skip breakpoints from other symbol spaces. (disable_breakpoints_in_unloaded_shlib): Match symbol spaces. (create_catchpoint): Set the symbol space in the sal. (disable_breakpoints_before_startup): Skip breakpoints from other symbol spaces. Set executing_startup in the current symbol space. (enable_breakpoints_after_startup): Clear executing_startup in the current symbol space. Skip breakpoints from other symbol spaces. (clone_momentary_breakpoint): Also copy the symbol space. (add_location_to_breakpoint): Set the location's symbol space. (bp_loc_is_permanent): Switch thread and symbol space. (create_breakpoint): Adjust. (expand_line_sal_maybe): Expand comment to mention symbol spaces. Switch thread and symbol space when reading memory. (parse_breakpoint_sals): Set the symbol space in the sal. (break_command_really): Ditto. (skip_prologue_sal): Switch and space. (resolve_sal_pc): Ditto. (watch_command_1): Record the symbol space in the sal. (create_ada_exception_breakpoint): Adjust. (clear_command): Adjust. Match symbol spaces. (update_global_location_list): Use breakpoint_address_match. (breakpoint_re_set_one): Switch thread and space. (breakpoint_re_set): Save symbol space. (breakpoint_re_set_thread): Also reset the symbol space. (deprecated_insert_raw_breakpoint): Add an address space argument. Adjust. (insert_single_step_breakpoint): Ditto. (single_step_breakpoint_inserted_here_p): Ditto. (clear_syscall_counts): New. (_initialize_breakpoint): Install it as inferior_exit observer. * exec.h: Include "progspace.h". (exec_bfd, exec_bfd_mtime): New defines. (exec_close): Declare. * exec.c: Include "gdbthread.h" and "progspace.h". (exec_bfd, exec_bfd_mtime, current_target_sections_1): Delete. (using_exec_ops): New. (exec_close_1): Rename to exec_close, and make public. (exec_close): Rename to exec_close_1, and adjust all callers. Add description. Remove target sections and close executables from all program spaces. (exec_file_attach): Add comment. (add_target_sections): Check on `using_exec_ops' to check if the target should be pushed. (remove_target_sections): Only unpush the target if there are no more target sections in any symbol space. * gdbcore.h: Include "exec.h". (exec_bfd, exec_bfd_mtime): Remove declarations. * frame.h (get_frame_program_space, get_frame_address_space) (frame_unwind_program_space): Declare. * frame.c (struct frame_info) <pspace, aspace>: New fields. (create_sentinel_frame): Add program space argument. Set the pspace and aspace fields of the frame object. (get_current_frame, create_new_frame): Adjust. (get_frame_program_space): New. (frame_unwind_program_space): New. (get_frame_address_space): New. * stack.c (print_frame_info): Adjust. (print_frame): Use the frame's program space. * gdbthread.h (any_live_thread_of_process): Declare. * thread.c (any_live_thread_of_process): New. (switch_to_thread): Switch the program space as well. (restore_selected_frame): Don't warn if trying to restore frame level 0. * inferior.h: Include "progspace.h". (detach_fork): Declare. (struct inferior) <removable, aspace, pspace> <vfork_parent, vfork_child, pending_detach> <waiting_for_vfork_done>: New fields. <terminal_info>: Remove field. <data, num_data>: New fields. (register_inferior_data, register_inferior_data_with_cleanup) (clear_inferior_data, set_inferior_data, inferior_data): Declare. (exit_inferior, exit_inferior_silent, exit_inferior_num_silent) (inferior_appeared): Declare. (find_inferior_pid): Typo. (find_inferior_id, find_inferior_for_program_space): Declare. (set_current_inferior, save_current_inferior, prune_inferiors) (number_of_inferiors): Declare. (inferior_list): Declare. * inferior.c: Include "gdbcore.h" and "symfile.h". (inferior_list): Make public. (delete_inferior_1): Always delete thread silently. (find_inferior_id): Make public. (current_inferior_): New. (current_inferior): Use it. (set_current_inferior): New. (restore_inferior): New. (save_current_inferior): New. (free_inferior): Free the per-inferior data. (add_inferior_silent): Allocate per-inferior data. Call inferior_appeared. (delete_threads_of_inferior): New. (delete_inferior_1): Adjust interface to take an inferior pointer. (delete_inferior): Adjust. (delete_inferior_silent): Adjust. (exit_inferior_1): New. (exit_inferior): New. (exit_inferior_silent): New. (exit_inferior_num_silent): New. (detach_inferior): Adjust. (inferior_appeared): New. (discard_all_inferiors): Adjust. (find_inferior_id): Make public. Assert pid is not zero. (find_inferior_for_program_space): New. (have_inferiors): Check if we have any inferior with pid not zero. (have_live_inferiors): Go over all pushed targets looking for process_stratum. (prune_inferiors): New. (number_of_inferiors): New. (print_inferior): Add executable column. Print vfork parent/child relationships. (inferior_command): Adjust to cope with not running inferiors. (remove_inferior_command): New. (add_inferior_command): New. (clone_inferior_command): New. (struct inferior_data): New. (struct inferior_data_registration): New. (struct inferior_data_registry): New. (inferior_data_registry): New. (register_inferior_data_with_cleanup): New. (register_inferior_data): New. (inferior_alloc_data): New. (inferior_free_data): New. (clear_inferior_data): New. (set_inferior_data): New. (inferior_data): New. (initialize_inferiors): New. (_initialize_inferiors): Register "add-inferior", "remove-inferior" and "clone-inferior" commands. * objfiles.h: Include "progspace.h". (struct objfile) <pspace>: New field. (symfile_objfile, object_files): Don't declare. (ALL_PSPACE_OBJFILES): New. (ALL_PSPACE_OBJFILES_SAFE): New. (ALL_OBJFILES, ALL_OBJFILES_SAFE): Adjust. (ALL_PSPACE_SYMTABS): New. (ALL_PRIMARY_SYMTABS): Adjust. (ALL_PSPACE_PRIMARY_SYMTABS): New. (ALL_PSYMTABS): Adjust. (ALL_PSPACE_PSYMTABS): New. * objfiles.c (object_files, symfile_objfile): Delete. (struct objfile_sspace_info): New. (objfiles_pspace_data): New. (objfiles_pspace_data_cleanup): New. (get_objfile_pspace_data): New. (objfiles_changed_p): Delete. (allocate_objfile): Set the objfile's program space. Adjust to reference objfiles_changed_p in pspace data. (free_objfile): Adjust to reference objfiles_changed_p in pspace data. (objfile_relocate): Ditto. (update_section_map): Add pspace argument. Adjust to iterate over objfiles in the passed in pspace. (find_pc_section): Delete sections and num_sections statics. Adjust to refer to program space's objfiles_changed_p. Adjust to refer to sections and num_sections store in the objfile's pspace data. (objfiles_changed): Adjust to reference objfiles_changed_p in pspace data. (_initialize_objfiles): New. * linespec.c (decode_all_digits, decode_dollar): Set the sal's program space. * source.c (current_source_pspace): New. (get_current_source_symtab_and_line): Set the sal's program space. (set_current_source_symtab_and_line): Set current_source_pspace. (select_source_symtab): Ditto. Use ALL_OBJFILES. (forget_cached_source_info): Iterate over all program spaces. * symfile.c (clear_symtab_users): Adjust. * symmisc.c (print_symbol_bcache_statistics): Iterate over all program spaces. (print_objfile_statistics): Ditto. (maintenance_print_msymbols): Ditto. (maintenance_print_objfiles): Ditto. (maintenance_info_symtabs): Ditto. (maintenance_info_psymtabs): Ditto. * symtab.h (SYMTAB_PSPACE): New. (struct symtab_and_line) <pspace>: New field. * symtab.c (init_sal): Clear the sal's program space. (find_pc_sect_symtab): Set the sal's program space. Switch thread and space. (append_expanded_sal): Add program space argument. Iterate over all program spaces. (expand_line_sal): Iterate over all program spaces. Switch program space. * target.h (enum target_waitkind) <TARGET_WAITKIND_VFORK_DONE>: New. (struct target_ops) <to_thread_address_space>: New field. (target_thread_address_space): Define. * target.c (target_detach): Only remove breakpoints from the inferior we're detaching. (target_thread_address_space): New. * defs.h (initialize_progspace): Declare. * top.c (gdb_init): Call it. * solist.h (struct so_list) <sspace>: New field. * solib.h (struct program_space): Forward declare. (solib_name_from_address): Adjust prototype. * solib.c (so_list_head): Replace with a macro referencing the program space. (update_solib_list): Set the so's program space. (solib_name_from_address): Add a program space argument and adjust. * solib-svr4.c (struct svr4_info) <pid>: Delete field. <interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low> <interp_plt_sect_high>: New fields. (svr4_info_p, svr4_info): Delete. (solib_svr4_sspace_data): New. (get_svr4_info): Rewrite. (svr4_sspace_data_cleanup): New. (open_symbol_file_object): Adjust. (svr4_default_sos): Adjust. (svr4_fetch_objfile_link_map): Adjust. (interp_text_sect_low, interp_text_sect_high, interp_plt_sect_low) (interp_plt_sect_high): Delete. (svr4_in_dynsym_resolve_code): Adjust. (enable_break): Adjust. (svr4_clear_solib): Revert bit that removed the svr4_info here, and reinstate clearing debug_base, debug_loader_offset_p, debug_loader_offset and debug_loader_name. (_initialize_svr4_solib): Register solib_svr4_pspace_data. Don't install an inferior_exit observer anymore. * printcmd.c (struct display) <pspace>: New field. (display_command): Set the display's sspace. (do_one_display): Match the display's sspace. (display_uses_solib_p): Ditto. * linux-fork.c (detach_fork): Moved to infrun.c. (_initialize_linux_fork): Moved "detach-on-fork" command to infrun.c. * infrun.c (detach_fork): Moved from linux-fork.c. (proceed_after_vfork_done): New. (handle_vfork_child_exec_or_exit): New. (follow_exec_mode_replace, follow_exec_mode_keep) (follow_exec_mode_names, follow_exec_mode_string) (show_follow_exec_mode_string): New. (follow_exec): New. Reinstate the mark_breakpoints_out call. Remove shared libraries before attaching new executable. If user wants to keep the inferior, keep it. (displaced_step_fixup): Adjust to pass an address space to the breakpoints module. (resume): Ditto. (clear_proceed_status): In all-stop mode, always clear the proceed status of all threads. (prepare_to_proceed): Adjust to pass an address space to the breakpoints module. (proceed): Ditto. (adjust_pc_after_break): Ditto. (handle_inferior_event): When handling a process exit, switch the program space to the inferior's that had exited. Call handle_vfork_child_exec_or_exit. Adjust to pass an address space to the breakpoints module. In non-stop mode, when following a fork and detach-fork is off, also resume the other branch. Handle TARGET_WAITKIND_VFORK_DONE. Set the program space in sals. (normal_stop): Prune inferiors. (_initialize_infrun): Install the new "follow-exec-mode" command. "detach-on-fork" moved here. * regcache.h (get_regcache_aspace): Declare. * regcache.c (struct regcache) <aspace>: New field. (regcache_xmalloc): Clear the aspace. (get_regcache_aspace): New. (regcache_cpy): Copy the aspace field. (regcache_cpy_no_passthrough): Ditto. (get_thread_regcache): Fetch the thread's address space from the target, and store it in the regcache. * infcall.c (call_function_by_hand): Set the sal's pspace. * arch-utils.c (default_has_shared_address_space): New. * arch-utils.h (default_has_shared_address_space): Declare. * gdbarch.sh (has_shared_address_space): New. * gdbarch.h, gdbarch.c: Regenerate. * linux-tdep.c: Include auxv.h, target.h, elf/common.h. (linux_has_shared_address_space): New. (_initialize_linux_tdep): Declare. * arm-tdep.c (arm_software_single_step): Pass the frame's address space to insert_single_step_breakpoint. * arm-linux-tdep.c (arm_linux_software_single_step): Pass the frame's pspace to breakpoint functions. * cris-tdep.c (crisv32_single_step_through_delay): Ditto. (cris_software_single_step): Ditto. * mips-tdep.c (deal_with_atomic_sequence): Add frame argument. Pass the frame's pspace to breakpoint functions. (mips_software_single_step): Adjust. (mips_single_step_through_delay): Adjust. * rs6000-aix-tdep.c (rs6000_software_single_step): Adjust. * rs6000-tdep.c (ppc_deal_with_atomic_sequence): Adjust. * solib-irix.c (enable_break): Adjust to pass the current frame's address space to breakpoint functions. * sparc-tdep.c (sparc_software_single_step): Ditto. * spu-tdep.c (spu_software_single_step): Ditto. * alpha-tdep.c (alpha_software_single_step): Ditto. * record.c (record_wait): Adjust to pass an address space to the breakpoints module. * fork-child.c (fork_inferior): Set the new inferior's program and address spaces. * inf-ptrace.c (inf_ptrace_follow_fork): Copy the parent's program and address spaces. (inf_ptrace_attach): Set the inferior's program and address spaces. * linux-nat.c: Include "solib.h". (linux_child_follow_fork): Manage parent and child's program and address spaces. Clone the parent's program space if necessary. Don't wait for the vfork to be done here. Refuse to resume if following the vfork parent while leaving the child stopped. (resume_callback): Don't resume a vfork parent. (linux_nat_resume): Also check for pending events in the lp->waitstatus field. (linux_handle_extended_wait): Report TARGET_WAITKIND_VFORK_DONE events to the core. (stop_wait_callback): Don't wait for SIGSTOP on vfork parents. (cancel_breakpoint): Adjust. * linux-thread-db.c (thread_db_wait): Don't remove thread event breakpoints here. (thread_db_mourn_inferior): Don't mark breakpoints out here. Remove thread event breakpoints after mourning. * corelow.c: Include progspace.h. (core_open): Set the inferior's program and address spaces. * remote.c (remote_add_inferior): Set the new inferior's program and address spaces. (remote_start_remote): Update address spaces. (extended_remote_create_inferior_1): Don't init the thread list if we already debugging other inferiors. * darwin-nat.c (darwin_attach): Set the new inferior's program and address spaces. * gnu-nat.c (gnu_attach): Ditto. * go32-nat.c (go32_create_inferior): Ditto. * inf-ttrace.c (inf_ttrace_follow_fork, inf_ttrace_attach): Ditto. * monitor.c (monitor_open): Ditto. * nto-procfs.c (procfs_attach, procfs_create_inferior): Ditto. * procfs.c (do_attach): Ditto. * windows-nat.c (do_initial_windows_stuff): Ditto. * inflow.c (inferior_process_group) (terminal_init_inferior_with_pgrp, terminal_inferior, (terminal_ours_1, inflow_inferior_exit, copy_terminal_info) (child_terminal_info, new_tty_postfork, set_sigint_trap): Adjust to use per-inferior data instead of inferior->terminal_info. (inflow_inferior_data): New. (inflow_new_inferior): Delete. (inflow_inferior_data_cleanup): New. (get_inflow_inferior_data): New. * mi/mi-interp.c (mi_new_inferior): Rename to... (mi_inferior_appeared): ... this. (mi_interpreter_init): Adjust. * tui/tui-disasm.c: Include "progspace.h". (tui_set_disassem_content): Pass an address space to breakpoint_here_p. * NEWS: Mention multi-program debugging support. Mention new commands "add-inferior", "clone-inferior", "remove-inferior", "maint info program-spaces", and new option "set follow-exec-mode". 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * observer.texi (new_inferior): Rename to... (inferior_appeared): ... this. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/testsuite/ * gdb.base/foll-vfork.exp: Adjust to spell out "follow-fork". * gdb.base/foll-exec.exp: Adjust to expect a process id before "Executing new program". * gdb.base/foll-fork.exp: Adjust to spell out "follow-fork". * gdb.base/multi-forks.exp: Ditto. Adjust to the inferior being left listed after having been killed. * gdb.base/attach.exp: Adjust to spell out "symbol-file". * gdb.base/maint.exp: Adjust test. * Makefile.in (ALL_SUBDIRS): Add gdb.multi. * gdb.multi/Makefile.in: New. * gdb.multi/base.exp: New. * gdb.multi/goodbye.c: New. * gdb.multi/hangout.c: New. * gdb.multi/hello.c: New. * gdb.multi/bkpt-multi-exec.c: New. * gdb.multi/bkpt-multi-exec.exp: New. * gdb.multi/crashme.c: New. 2009-10-19 Pedro Alves <pedro@codesourcery.com> Stan Shebs <stan@codesourcery.com> gdb/doc/ * gdb.texinfo (Inferiors): Rename node to ... (Inferiors and Programs): ... this. Mention running multiple programs in the same debug session. <info inferiors>: Mention the new 'Executable' column if "info inferiors". Update examples. Document the "add-inferior", "clone-inferior", "remove-inferior" and "maint info program-spaces" commands. (Process): Rename node to... (Forks): ... this. Document "set|show follow-exec-mode".
2009-10-19 11:51:43 +02:00
/* This creates the current_program_space. Do this after all the
_initialize_foo routines have had a chance to install their
per-sspace data keys. Also do this before
initialize_current_architecture is called, because it accesses
exec_bfd of the current program space. */
initialize_progspace ();
initialize_inferiors ();
initialize_current_architecture ();
init_main (); /* But that omits this file! Do it now. */
* NEWS: Mention native Windows support. * Makefile.in (gdb_select_h, ser_tcp_h): New. (ALLDEPFILES): Add ser-mingw.c. (event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o) (ser-tcp.o, ser-unix.o): Update. (ser-mingw.o): New rule. * configure: Regenerated. * configure.ac: Add ser-mingw.o for mingw32. * ser-mingw.c: New file. * event-loop.c: Include "gdb_select.h". (gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c. * ser-base.c: Include "gdb_select.h". (ser_base_wait_for): Use gdb_select. * serial.c (serial_for_fd): New function. (serial_fdopen): Try "terminal" before "hardwire". Initialize the allocated struct serial. (serial_wait_handle): New function. * serial.h (serial_for_fd, serial_wait_handle): New prototypes. (struct serial_ops) [USE_WIN32API]: Add wait_handle. * gdb_select.h: New file. * ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include. (net_close, net_read_prim, net_write_prim): Make global. (net_open): Likewise. Pass an exception set to select. Whitespace fix. Document why we can not use gdb_select. (_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here. * ser-tcp.h: New file. * inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here. (handle_sigio): Use gdb_select. (initialize_stdin_serial): New function. * terminal.h (initialize_stdin_serial): New prototype. * top.c (gdb_init): Call initialize_stdin_serial. * mingw-hdep.c (gdb_select): New function, moved from gdb_select in event-loop.c. Add exception condition support. Use serial_for_fd and serial_wait_handle. Fix timeout handling. * posix-hdep.c: Include "gdb_select.h". (gdb_select): New function. * remote-st.c (connect_command): Use gdb_select. * ser-unix.c: Include "gdb_select.h". (hardwire_send_break, wait_for): Use gdb_select.
2006-02-10 23:01:43 +01:00
initialize_stdin_serial ();
Don't propagate our current terminal state to the inferior Currently when we start an inferior we have the inferior inherit our terminal state. Under TUI, our terminal is highly modified by ncurses and readline. So when starting an inferior under TUI, the inferior will have a highly modified terminal state which will interfere with standard I/O. For example, $ gdb gdb (gdb) break main (gdb) run (gdb) print puts ("a\nb") a b $1 = 4 (gdb) [enter TUI mode] (gdb) run (gdb) [exit TUI mode] (gdb) print puts ("a\nb") a b $2 = 4 (gdb) print puts ("a\r\nb\r") a b $3 = 6 As you can see, when we start the inferior under the regular interface, puts() prints the text properly. But when we start the inferior under TUI, puts() does not print the text properly. This is because when we start the inferior under TUI it inherits our current terminal state which has been modified by ncurses to, among other things, require an explicit \r\n to print a new line. As a result the inferior performs standard I/O in an unexpected way. Because of this discrepancy, it doesn't seem like a good idea to have the inferior inherit our _current_ terminal state for it may have been modified by readline and/or ncurses. Instead, we should have the inferior inherit a pristine snapshot of our terminal state taken before readline or ncurses have had a chance to alter it. This enables the inferior to run in a more accurate way, more closely mimicking the program's behavior had it run standalone. And it fixes the above mentioned issue. Tested on x86_64-unknown-linux-gnu. gdb/ChangeLog: * terminal.h (set_initial_gdb_ttystate): Declare. * inflow.c (initial_gdb_ttystate): New static variable. (set_initial_gdb_ttystate): New setter. (child_terminal_init_with_pgrp): Copy initial_gdb_ttystate instead of our current terminal state. * top.c (gdb_init): Call set_initial_gdb_ttystate.
2014-11-22 20:12:49 +01:00
/* Take a snapshot of our tty state before readline/ncurses have had a chance
to alter it. */
set_initial_gdb_ttystate ();
async_init_signals ();
/* We need a default language for parsing expressions, so simple
things like "set width 0" won't fail if no language is explicitly
set in a config file or implicitly set by reading an executable
during startup. */
set_language (language_c);
expected_language = current_language; /* Don't warn about the change. */
Extension Language API * configure.ac (libpython checking): Remove all but python.o from CONFIG_OBS. Remove all but python.c from CONFIG_SRCS. * configure: Regenerate. * Makefile.in (SFILES): Add extension.c. (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h (COMMON_OBS): Add extension.o. * extension.h: New file. * extension-priv.h: New file. * extension.c: New file. * python/python-internal.h: #include "extension.h". (gdbpy_auto_load_enabled): Declare. (gdbpy_apply_val_pretty_printer): Declare. (gdbpy_apply_frame_filter): Declare. (gdbpy_preserve_values): Declare. (gdbpy_breakpoint_cond_says_stop): Declare. (gdbpy_breakpoint_has_cond): Declare. (void source_python_script_for_objfile): Delete. * python/python.c: #include "extension-priv.h". Delete inclusion of "observer.h". (extension_language_python): Moved here and renamed from script_language_python in py-auto-load.c. Redefined to be of type extension_language_defn. (python_extension_script_ops): New global. (python_extension_ops): New global. (struct python_env): New member previous_active. (restore_python_env): Call restore_active_ext_lang. (ensure_python_env): Call set_active_ext_lang. (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static. New arg extlang. (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static. New arg extlang. (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static. New arg extlang. (gdbpy_eval_from_control_command): Renamed from eval_python_from_control_command, made static. New arg extlang. (gdbpy_source_script) Renamed from source_python_script, made static. New arg extlang. (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change result to int. New arg extlang. (gdbpy_source_objfile_script): Renamed from source_python_script_for_objfile, made static. New arg extlang. (gdbpy_start_type_printers): Renamed from start_type_printers, made static. New args extlang, extlang_printers. Change result type to "void". (gdbpy_apply_type_printers): Renamed from apply_type_printers, made static. New arg extlang. Rename arg printers to extlang_printers and change type to ext_lang_type_printers *. (gdbpy_free_type_printers): Renamed from free_type_printers, made static. Replace argument arg with extlang, extlang_printers. (!HAVE_PYTHON, eval_python_from_control_command): Delete. (!HAVE_PYTHON, source_python_script): Delete. (!HAVE_PYTHON, gdbpy_should_stop): Delete. (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete. (!HAVE_PYTHON, start_type_printers): Delete. (!HAVE_PYTHON, apply_type_printers): Delete. (!HAVE_PYTHON, free_type_printers): Delete. (_initialize_python): Delete call to observer_attach_before_prompt. (finalize_python): Set/restore active extension language. (gdbpy_finish_initialization) Renamed from finish_python_initialization, made static. New arg extlang. (gdbpy_initialized): New function. * python/python.h: #include "extension.h". Delete #include "value.h", "mi/mi-cmds.h". (extension_language_python): Declare. (GDBPY_AUTO_FILE_NAME): Delete. (enum py_bt_status): Moved to extension.h and renamed to ext_lang_bt_status. (enum frame_filter_flags): Moved to extension.h. (enum py_frame_args): Moved to extension.h and renamed to ext_lang_frame_args. (finish_python_initialization): Delete. (eval_python_from_control_command): Delete. (source_python_script): Delete. (apply_val_pretty_printer): Delete. (apply_frame_filter): Delete. (preserve_python_values): Delete. (gdbpy_script_language_defn): Delete. (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete. (start_type_printers, apply_type_printers, free_type_printers): Delete. * auto-load.c: #include "extension.h". (GDB_AUTO_FILE_NAME): Delete. (auto_load_gdb_scripts_enabled): Make public. New arg extlang. (script_language_gdb): Delete, moved to extension.c and renamed to extension_language_gdb. (source_gdb_script_for_objfile): Delete. (auto_load_pspace_info): New member unsupported_script_warning_printed. (loaded_script): Change type of language member to struct extension_language_defn *. (init_loaded_scripts_info): Initialize unsupported_script_warning_printed. (maybe_add_script): Make static. Change type of language arg to struct extension_language_defn *. (clear_section_scripts): Reset unsupported_script_warning_printed. (auto_load_objfile_script_1): Rewrite to use extension language API. (auto_load_objfile_script): Make public. Remove support-compiled-in and auto-load-enabled checks, moved to auto_load_scripts_for_objfile. (source_section_scripts): Rewrite to use extension language API. (load_auto_scripts_for_objfile): Rewrite to use auto_load_scripts_for_objfile. (collect_matching_scripts_data): Change type of language member to struct extension_language_defn *. (auto_load_info_scripts): Change type of language arg to struct extension_language_defn *. (unsupported_script_warning_print): New function. (script_not_found_warning_print): Make static. (_initialize_auto_load): Rewrite construction of scripts-directory help. * auto-load.h (struct objfile): Add forward decl. (struct script_language): Delete. (struct auto_load_pspace_info): Add forward decl. (struct extension_language_defn): Add forward decl. (maybe_add_script): Delete. (auto_load_objfile_script): Declare. (script_not_found_warning_print): Delete. (auto_load_info_scripts): Update prototype. (auto_load_gdb_scripts_enabled): Declare. * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from auto_load_python_scripts_enabled and made public. (script_language_python): Delete, moved to python.c. (gdbpy_script_language_defn): Delete. (info_auto_load_python_scripts): Update to use extension_language_python. * breakpoint.c (condition_command): Replace call to gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang. (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop with call to breakpoint_ext_lang_cond_says_stop. * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed from gdbpy_should_stop. Change result type to enum scr_bp_stop. New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL. (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond. New arg slang. (local_setattro): Print name of extension language with existing stop condition. * valprint.c (val_print, value_print): Update to call apply_ext_lang_val_pretty_printer. * cp-valprint.c (cp_print_value): Update call to apply_ext_lang_val_pretty_printer. * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON. (gdbpy_apply_val_pretty_printer): Renamed from apply_val_pretty_printer. New arg extlang. (!HAVE_PYTHON, apply_val_pretty_printer): Delete. * cli/cli-cmds.c (source_script_from_stream): Rewrite to use extension language API. * cli/cli-script.c (execute_control_command): Update to call eval_ext_lang_from_control_command. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use enum ext_lang_bt_status values. Update call to apply_ext_lang_frame_filter. (mi_cmd_stack_list_locals): Ditto. (mi_cmd_stack_list_args): Ditto. (mi_cmd_stack_list_variables): Ditto. * mi/mi-main.c: Delete #include "python/python-internal.h". Add #include "extension.h". (mi_cmd_list_features): Replace reference to python internal variable gdb_python_initialized with call to ext_lang_initialized_p. * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status. Update to use enum ext_lang_frame_args. Update to call apply_ext_lang_frame_filter. * python/py-framefilter.c (extract_sym): Update to use enum ext_lang_bt_status. (extract_value, py_print_type, py_print_value): Ditto. (py_print_single_arg, enumerate_args, enumerate_locals): Ditto. (py_mi_print_variables, py_print_locals, py_print_args): Ditto. (py_print_frame): Ditto. (gdbpy_apply_frame_filter): Renamed from apply_frame_filter. New arg extlang. Update to use enum ext_lang_bt_status. * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to finish_python_initialization. Replace with call to finish_ext_lang_initialization. * typeprint.c (do_free_global_table): Update to call free_ext_lang_type_printers. (create_global_typedef_table): Update to call start_ext_lang_type_printers. (find_global_typedef): Update to call apply_ext_lang_type_printers. * typeprint.h (struct ext_lang_type_printers): Add forward decl. (type_print_options): Change type of global_printers from "void *" to "struct ext_lang_type_printers *". * value.c (preserve_values): Update to call preserve_ext_lang_values. * python/py-value.c: Remove #ifdef HAVE_PYTHON. (gdbpy_preserve_values): Renamed from preserve_python_values. New arg extlang. (!HAVE_PYTHON, preserve_python_values): Delete. * utils.c (quit_flag): Delete, moved to extension.c. (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to extension.c. * eval.c: Delete #include "python/python.h". * main.c: Delete #include "python/python.h". * defs.h: Update comment. testsuite/ * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected output. * gdb.gdb/python-interrupts.exp: New file.
2014-02-06 04:27:58 +01:00
/* Python initialization, for example, can require various commands to be
installed. For example "info pretty-printer" needs the "info"
prefix to be installed. Keep things simple and just do final
Extension Language API * configure.ac (libpython checking): Remove all but python.o from CONFIG_OBS. Remove all but python.c from CONFIG_SRCS. * configure: Regenerate. * Makefile.in (SFILES): Add extension.c. (HFILES_NO_SRCDIR): Add extension.h, extension-priv.h (COMMON_OBS): Add extension.o. * extension.h: New file. * extension-priv.h: New file. * extension.c: New file. * python/python-internal.h: #include "extension.h". (gdbpy_auto_load_enabled): Declare. (gdbpy_apply_val_pretty_printer): Declare. (gdbpy_apply_frame_filter): Declare. (gdbpy_preserve_values): Declare. (gdbpy_breakpoint_cond_says_stop): Declare. (gdbpy_breakpoint_has_cond): Declare. (void source_python_script_for_objfile): Delete. * python/python.c: #include "extension-priv.h". Delete inclusion of "observer.h". (extension_language_python): Moved here and renamed from script_language_python in py-auto-load.c. Redefined to be of type extension_language_defn. (python_extension_script_ops): New global. (python_extension_ops): New global. (struct python_env): New member previous_active. (restore_python_env): Call restore_active_ext_lang. (ensure_python_env): Call set_active_ext_lang. (gdbpy_clear_quit_flag): Renamed from clear_quit_flag, made static. New arg extlang. (gdbpy_set_quit_flag): Renamed from set_quit_flag, made static. New arg extlang. (gdbpy_check_quit_flag): Renamed from check_quit_flag, made static. New arg extlang. (gdbpy_eval_from_control_command): Renamed from eval_python_from_control_command, made static. New arg extlang. (gdbpy_source_script) Renamed from source_python_script, made static. New arg extlang. (gdbpy_before_prompt_hook): Renamed from before_prompt_hook. Change result to int. New arg extlang. (gdbpy_source_objfile_script): Renamed from source_python_script_for_objfile, made static. New arg extlang. (gdbpy_start_type_printers): Renamed from start_type_printers, made static. New args extlang, extlang_printers. Change result type to "void". (gdbpy_apply_type_printers): Renamed from apply_type_printers, made static. New arg extlang. Rename arg printers to extlang_printers and change type to ext_lang_type_printers *. (gdbpy_free_type_printers): Renamed from free_type_printers, made static. Replace argument arg with extlang, extlang_printers. (!HAVE_PYTHON, eval_python_from_control_command): Delete. (!HAVE_PYTHON, source_python_script): Delete. (!HAVE_PYTHON, gdbpy_should_stop): Delete. (!HAVE_PYTHON, gdbpy_breakpoint_has_py_cond): Delete. (!HAVE_PYTHON, start_type_printers): Delete. (!HAVE_PYTHON, apply_type_printers): Delete. (!HAVE_PYTHON, free_type_printers): Delete. (_initialize_python): Delete call to observer_attach_before_prompt. (finalize_python): Set/restore active extension language. (gdbpy_finish_initialization) Renamed from finish_python_initialization, made static. New arg extlang. (gdbpy_initialized): New function. * python/python.h: #include "extension.h". Delete #include "value.h", "mi/mi-cmds.h". (extension_language_python): Declare. (GDBPY_AUTO_FILE_NAME): Delete. (enum py_bt_status): Moved to extension.h and renamed to ext_lang_bt_status. (enum frame_filter_flags): Moved to extension.h. (enum py_frame_args): Moved to extension.h and renamed to ext_lang_frame_args. (finish_python_initialization): Delete. (eval_python_from_control_command): Delete. (source_python_script): Delete. (apply_val_pretty_printer): Delete. (apply_frame_filter): Delete. (preserve_python_values): Delete. (gdbpy_script_language_defn): Delete. (gdbpy_should_stop, gdbpy_breakpoint_has_py_cond): Delete. (start_type_printers, apply_type_printers, free_type_printers): Delete. * auto-load.c: #include "extension.h". (GDB_AUTO_FILE_NAME): Delete. (auto_load_gdb_scripts_enabled): Make public. New arg extlang. (script_language_gdb): Delete, moved to extension.c and renamed to extension_language_gdb. (source_gdb_script_for_objfile): Delete. (auto_load_pspace_info): New member unsupported_script_warning_printed. (loaded_script): Change type of language member to struct extension_language_defn *. (init_loaded_scripts_info): Initialize unsupported_script_warning_printed. (maybe_add_script): Make static. Change type of language arg to struct extension_language_defn *. (clear_section_scripts): Reset unsupported_script_warning_printed. (auto_load_objfile_script_1): Rewrite to use extension language API. (auto_load_objfile_script): Make public. Remove support-compiled-in and auto-load-enabled checks, moved to auto_load_scripts_for_objfile. (source_section_scripts): Rewrite to use extension language API. (load_auto_scripts_for_objfile): Rewrite to use auto_load_scripts_for_objfile. (collect_matching_scripts_data): Change type of language member to struct extension_language_defn *. (auto_load_info_scripts): Change type of language arg to struct extension_language_defn *. (unsupported_script_warning_print): New function. (script_not_found_warning_print): Make static. (_initialize_auto_load): Rewrite construction of scripts-directory help. * auto-load.h (struct objfile): Add forward decl. (struct script_language): Delete. (struct auto_load_pspace_info): Add forward decl. (struct extension_language_defn): Add forward decl. (maybe_add_script): Delete. (auto_load_objfile_script): Declare. (script_not_found_warning_print): Delete. (auto_load_info_scripts): Update prototype. (auto_load_gdb_scripts_enabled): Declare. * python/py-auto-load.c (gdbpy_auto_load_enabled): Renamed from auto_load_python_scripts_enabled and made public. (script_language_python): Delete, moved to python.c. (gdbpy_script_language_defn): Delete. (info_auto_load_python_scripts): Update to use extension_language_python. * breakpoint.c (condition_command): Replace call to gdbpy_breakpoint_has_py_cond with call to get_breakpoint_cond_ext_lang. (bpstat_check_breakpoint_conditions): Replace call to gdbpy_should_stop with call to breakpoint_ext_lang_cond_says_stop. * python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Renamed from gdbpy_should_stop. Change result type to enum scr_bp_stop. New arg slang. Return SCR_BP_STOP_UNSET if py_bp_object is NULL. (gdbpy_breakpoint_has_cond): Renamed from gdbpy_breakpoint_has_py_cond. New arg slang. (local_setattro): Print name of extension language with existing stop condition. * valprint.c (val_print, value_print): Update to call apply_ext_lang_val_pretty_printer. * cp-valprint.c (cp_print_value): Update call to apply_ext_lang_val_pretty_printer. * python/py-prettyprint.c: Remove #ifdef HAVE_PYTHON. (gdbpy_apply_val_pretty_printer): Renamed from apply_val_pretty_printer. New arg extlang. (!HAVE_PYTHON, apply_val_pretty_printer): Delete. * cli/cli-cmds.c (source_script_from_stream): Rewrite to use extension language API. * cli/cli-script.c (execute_control_command): Update to call eval_ext_lang_from_control_command. * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Update to use enum ext_lang_bt_status values. Update call to apply_ext_lang_frame_filter. (mi_cmd_stack_list_locals): Ditto. (mi_cmd_stack_list_args): Ditto. (mi_cmd_stack_list_variables): Ditto. * mi/mi-main.c: Delete #include "python/python-internal.h". Add #include "extension.h". (mi_cmd_list_features): Replace reference to python internal variable gdb_python_initialized with call to ext_lang_initialized_p. * stack.c (backtrace_command_1): Update to use enum ext_lang_bt_status. Update to use enum ext_lang_frame_args. Update to call apply_ext_lang_frame_filter. * python/py-framefilter.c (extract_sym): Update to use enum ext_lang_bt_status. (extract_value, py_print_type, py_print_value): Ditto. (py_print_single_arg, enumerate_args, enumerate_locals): Ditto. (py_mi_print_variables, py_print_locals, py_print_args): Ditto. (py_print_frame): Ditto. (gdbpy_apply_frame_filter): Renamed from apply_frame_filter. New arg extlang. Update to use enum ext_lang_bt_status. * top.c (gdb_init): Delete #ifdef HAVE_PYTHON call to finish_python_initialization. Replace with call to finish_ext_lang_initialization. * typeprint.c (do_free_global_table): Update to call free_ext_lang_type_printers. (create_global_typedef_table): Update to call start_ext_lang_type_printers. (find_global_typedef): Update to call apply_ext_lang_type_printers. * typeprint.h (struct ext_lang_type_printers): Add forward decl. (type_print_options): Change type of global_printers from "void *" to "struct ext_lang_type_printers *". * value.c (preserve_values): Update to call preserve_ext_lang_values. * python/py-value.c: Remove #ifdef HAVE_PYTHON. (gdbpy_preserve_values): Renamed from preserve_python_values. New arg extlang. (!HAVE_PYTHON, preserve_python_values): Delete. * utils.c (quit_flag): Delete, moved to extension.c. (clear_quit_flag, set_quit_flag, check_quit_flag): Delete, moved to extension.c. * eval.c: Delete #include "python/python.h". * main.c: Delete #include "python/python.h". * defs.h: Update comment. testsuite/ * gdb.python/py-breakpoint.exp (test_bkpt_eval_funcs): Update expected output. * gdb.gdb/python-interrupts.exp: New file.
2014-02-06 04:27:58 +01:00
script initialization here. */
finish_ext_lang_initialization ();
/* Create $_gdb_major and $_gdb_minor convenience variables. */
init_gdb_version_vars ();
}