All annotate_breakpoints_changed calls are along-side

observer_notify_breakpoints_changed calls.  All, except the
init_raw_breakpoint one.  But that one is actually wrong.  The
breakpoint is being constructed at that point, and hasn't been placed
on the breakpoint chain yet.  It would be better placed in
install_breakpoint, and I actually started out that way.  But once the
annotate_breakpoints_changed are parallel to the observer calls, we
can fully move annotations to observers too.

One issue is that this changes the order of annotations a bit.
Before, we'd emit the annotation, and after call "mention()" on the
breakpoint (which prints the breakpoint number, etc.).  But, we call
the observers _after_ mention is called, so the annotation output will
change a little:

void
install_breakpoint (int internal, struct breakpoint *b, int update_gll)
{
  add_to_breakpoint_chain (b);
  set_breakpoint_number (internal, b);
  if (is_tracepoint (b))
    set_tracepoint_count (breakpoint_count);
  if (!internal)
    mention (b);
  observer_notify_breakpoint_created (b);

  if (update_gll)
    update_global_location_list (1);
}

I believe this order doesn't really matter (the frontend needs to wait
for the prompt anyway), so I just adjust the expected output in the
tests.  Emacs in annotations mode doesn't seem to complain.  Couple
that with the previous patch that suppressed duplicated annotations,
and, the fact that some annotations calls were actually missing (were
we do have observer calls), more changes to the tests are needed
anyway.

Tested on x86_64 Fedora 17.

gdb/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* annotate.c (annotate_breakpoints_changed): Rename to ...
	(annotate_breakpoints_invalid): ... this.  Make static.
	(breakpoint_changed): Adjust.
	(_initialize_annotate): Always install the observers.  Install a
	"breakpoint_created" observer.
	* annotate.h (annotate_breakpoints_changed): Delete declaration.
	* breakpoint.c (set_breakpoint_condition)
	(breakpoint_set_commands, do_map_commands_command)
	(init_raw_breakpoint, clear_command, set_ignore_count)
	(enable_breakpoint_disp): No longer call
	annotate_breakpoints_changed.

gdb/testsuite/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* gdb.base/annota1.exp (breakpoints_invalid): New variable.
	Adjust tests to breakpoints-invalid changes.
	* gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New
	variables.
	Adjust tests to breakpoints-invalid changes.
This commit is contained in:
Pedro Alves 2013-01-22 20:19:40 +00:00
parent bd00c69423
commit 9c97429fb1
7 changed files with 49 additions and 35 deletions

View File

@ -1,3 +1,17 @@
2013-01-22 Pedro Alves <palves@redhat.com>
* annotate.c (annotate_breakpoints_changed): Rename to ...
(annotate_breakpoints_invalid): ... this. Make static.
(breakpoint_changed): Adjust.
(_initialize_annotate): Always install the observers. Install a
"breakpoint_created" observer.
* annotate.h (annotate_breakpoints_changed): Delete declaration.
* breakpoint.c (set_breakpoint_condition)
(breakpoint_set_commands, do_map_commands_command)
(init_raw_breakpoint, clear_command, set_ignore_count)
(enable_breakpoint_disp): No longer call
annotate_breakpoints_changed.
2013-01-22 Pedro Alves <palves@redhat.com>
* annotate.c: Include "inferior.h".

View File

@ -63,9 +63,9 @@ print_value_flags (struct type *t)
else
printf_filtered (("-"));
}
void
annotate_breakpoints_changed (void)
static void
annotate_breakpoints_invalid (void)
{
if (annotation_level == 2
&& (!breakpoints_invalid_emitted
@ -575,15 +575,13 @@ annotate_display_prompt (void)
static void
breakpoint_changed (struct breakpoint *b)
{
annotate_breakpoints_changed ();
annotate_breakpoints_invalid ();
}
void
_initialize_annotate (void)
{
if (annotation_level == 2)
{
observer_attach_breakpoint_deleted (breakpoint_changed);
observer_attach_breakpoint_modified (breakpoint_changed);
}
observer_attach_breakpoint_created (breakpoint_changed);
observer_attach_breakpoint_deleted (breakpoint_changed);
observer_attach_breakpoint_modified (breakpoint_changed);
}

View File

@ -19,8 +19,6 @@
#include "symtab.h"
#include "gdbtypes.h"
extern void annotate_breakpoints_changed (void);
extern void annotate_breakpoint (int);
extern void annotate_catchpoint (int);
extern void annotate_watchpoint (int);

View File

@ -985,7 +985,6 @@ set_breakpoint_condition (struct breakpoint *b, char *exp,
}
mark_breakpoint_modified (b);
annotate_breakpoints_changed ();
observer_notify_breakpoint_modified (b);
}
@ -1217,7 +1216,6 @@ breakpoint_set_commands (struct breakpoint *b,
decref_counted_command_line (&b->commands);
b->commands = alloc_counted_command_line (commands);
annotate_breakpoints_changed ();
observer_notify_breakpoint_modified (b);
}
@ -1334,7 +1332,6 @@ do_map_commands_command (struct breakpoint *b, void *data)
incref_counted_command_line (info->cmd);
decref_counted_command_line (&b->commands);
b->commands = info->cmd;
annotate_breakpoints_changed ();
observer_notify_breakpoint_modified (b);
}
}
@ -7072,8 +7069,6 @@ init_raw_breakpoint (struct breakpoint *b, struct gdbarch *gdbarch,
program space. */
if (bptype != bp_breakpoint && bptype != bp_hardware_breakpoint)
b->pspace = sal.pspace;
annotate_breakpoints_changed ();
}
/* set_raw_breakpoint is a low level routine for allocating and
@ -12053,7 +12048,6 @@ clear_command (char *arg, int from_tty)
else
printf_unfiltered (_("Deleted breakpoints "));
}
annotate_breakpoints_changed ();
for (ix = 0; VEC_iterate(breakpoint_p, found, ix, b); ix++)
{
@ -14441,7 +14435,6 @@ set_ignore_count (int bptnum, int count, int from_tty)
"crossings of breakpoint %d."),
count, bptnum);
}
annotate_breakpoints_changed ();
observer_notify_breakpoint_modified (b);
return;
}
@ -14706,8 +14699,7 @@ enable_breakpoint_disp (struct breakpoint *bpt, enum bpdisp disposition,
bpt->disposition = disposition;
bpt->enable_count = count;
update_global_location_list (1);
annotate_breakpoints_changed ();
observer_notify_breakpoint_modified (bpt);
}

View File

@ -1,3 +1,11 @@
2013-01-22 Pedro Alves <palves@redhat.com>
* gdb.base/annota1.exp (breakpoints_invalid): New variable.
Adjust tests to breakpoints-invalid changes.
* gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New
variables.
Adjust tests to breakpoints-invalid changes.
2013-01-22 Pedro Alves <palves@redhat.com>
* gdb.base/annota1.exp (annotate ignore count change): Add

View File

@ -25,6 +25,7 @@ if [is_remote target] then {
return 0
}
set breakpoints_invalid "\r\n\032\032breakpoints-invalid\r\n"
#
# test running programs
@ -190,7 +191,7 @@ gdb_test_multiple "print non_existent_value" "print non_existent_value" {
# we can test annotate-signal-handler-caller
#
gdb_test_multiple "break handle_USR1" "break handle_USR1" {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n\032\032breakpoints-invalid\r\n.*$gdb_prompt$" {
pass "break handle_USR1"
}
}
@ -199,7 +200,7 @@ gdb_test_multiple "break handle_USR1" "break handle_USR1" {
# break at printf. When we are stopped at printf, we can test
#
gdb_test_multiple "break printf" "break printf" {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex.*\032\032breakpoints-invalid\r\n.*$gdb_prompt$" {
pass "break printf"
}
-re "\r\n\032\032post-prompt\r\nwarning: Breakpoint address adjusted from $hex to $hex.\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex.*$gdb_prompt$" {
@ -210,7 +211,7 @@ gdb_test_multiple "break printf" "break printf" {
#
# get to printf
#
set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n"
set pat_begin "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\r\n\r\n\032\032frames-invalid\r\n${breakpoints_invalid}"
set pat_adjust "warning: Breakpoint 3 address previously adjusted from $hex to $hex.\r\n"
set pat_end "\r\n\032\032breakpoint 3\r\n\r\nBreakpoint 3, \r\n\032\032frame-begin 0 $hex\r\n\r\n(\032\032frame-address\r\n$hex\r\n\032\032frame-address-end\r\n in \r\n)*.*\032\032frame-function-name\r\n.*printf(@.*)?\r\n\032\032frame-args\r\n.*\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$"
@ -279,19 +280,19 @@ if [target_info exists gdb,nosignals] {
# delete all the breakpoints
#
gdb_test_multiple "delete 1" "delete bp 1" {
-re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
pass "delete bp 1"
}
}
gdb_test_multiple "delete 2" "delete bp 2" {
-re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
pass "delete bp 2"
}
}
gdb_test_multiple "delete 3" "delete bp 3" {
-re "\r\n\032\032post-prompt\r\n$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\n${breakpoints_invalid}$gdb_prompt$" {
pass "delete bp 3"
}
}
@ -301,10 +302,10 @@ gdb_test_multiple "delete 3" "delete bp 3" {
# to test the annotate output for the display command.
#
gdb_test_multiple "break main" "break at main" {
-re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*$gdb_prompt$" {
-re "post-prompt.*Breakpoint 4 at $hex: file ${escapedsrcfile}, line $main_line.*\032\032breakpoints-invalid.*$gdb_prompt$" {
pass "break at main"
}
-re "post-prompt.*\032\032breakpoints-invalid.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*$gdb_prompt$" {
-re "post-prompt.*Breakpoint 4 at $hex: file .*${srcfile}, line $main_line.*\032\032breakpoints-invalid.*$gdb_prompt$" {
setup_xfail "*-*-*" 1270
fail "break at main"
}
@ -424,7 +425,7 @@ if [target_info exists gdb,nosignals] {
} else {
setup_xfail hppa*-*-hpux11*
gdb_test_multiple "signal SIGTRAP" "signal sent" {
-re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
-re ".*\032\032post-prompt\r\nContinuing with signal SIGTRAP.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)+\r\n\r\n\032\032signalled\r\n\r\nProgram terminated with signal \r\n\032\032signal-name\r\nSIGTRAP\r\n\032\032signal-name-end\r\n, \r\n\032\032signal-string\r\nTrace.breakpoint trap\r\n\032\032signal-string-end\r\n.\r\nThe program no longer exists.\r\n${breakpoints_invalid}\r\n\032\032stopped\r\n$gdb_prompt$" {
pass "signal sent"
}
}

View File

@ -38,6 +38,9 @@ if [is_remote target] then {
return 0
}
set breakpoints_invalid "\r\n\032\032breakpoints-invalid\r\n"
set frames_invalid "\r\n\032\032frames-invalid\r\n"
#
# line number where we need to stop in main
#
@ -99,7 +102,7 @@ gdb_test_multiple "print a" "print class" {
# `a.x is 1' is asynchronous regarding to `frames-invalid'.
#
gdb_test_multiple "continue" "continue until exit" {
-re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n$inferior_exited_re normally.\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\nContinuing.\r\n\r\n\032\032starting\(\r\n\r\n\032\032frames-invalid\)*\r\na.x is 1\r\n\(\r\n\032\032frames-invalid\r\n\)*\r\n\032\032exited 0\r\n$inferior_exited_re normally.\r\n${breakpoints_invalid}\r\n\032\032stopped\r\n$gdb_prompt$" {
pass "continue until exit"
}
}
@ -112,7 +115,7 @@ gdb_expect {
-re ".*Delete all breakpoints. \\(y or n\\) \r\n\032\032query.*$" {
send_gdb "y\n"
gdb_expect {
-re "\r\n\032\032post-query\r\n$gdb_prompt$" { pass "delete bps" }
-re "\r\n\032\032post-query\r\n${breakpoints_invalid}$gdb_prompt$" { pass "delete bps" }
-re ".*$gdb_prompt$" { fail "delete bps" }
timeout { fail "delete bps (timeout)" }
}
@ -125,7 +128,7 @@ gdb_expect {
# break at first line of main.
#
gdb_test_multiple "break 22" "break at main" {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\nBreakpoint.*at $hex: file.*$srcfile, line.*\r\n\032\032breakpoints-invalid.*\r\n$gdb_prompt$" {
pass "breakpoint at main"
}
}
@ -149,7 +152,7 @@ gdb_test_multiple "run" "run until main breakpoint" {
# set up a watch point on a.x
#
gdb_test_multiple "watch a.x" "set watch on a.x" {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032breakpoints-invalid\r\n.*atchpoint 3: a.x\r\n$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\n.*atchpoint 3: a.x.*\r\n\032\032breakpoints-invalid\r\n.*$gdb_prompt$" {
pass "set watch on a.x"
}
}
@ -159,10 +162,10 @@ gdb_test_multiple "watch a.x" "set watch on a.x" {
# annotate-watchpoint
#
gdb_test_multiple "next" "watch triggered on a.x" {
-re "\r\n\032\032post-prompt\r\n\r\n(\032\032breakpoints-invalid\r\n\r\n)*\032\032starting\r\n\r\n(\032\032frames-invalid\r\n\r\n)*\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n.*$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\n\032\032starting\r\n${frames_invalid}${breakpoints_invalid}\r\n\032\032watchpoint 3\r\n.*atchpoint 3: a.x\r\n\r\nOld value = 0\r\nNew value = 1\r\n\r\n\032\032frame-begin 0 $hex\r\n\r\n\032\032frame-function-name\r\nmain\r\n\032\032frame-args\r\n \\(\\)\r\n\032\032frame-source-begin\r\n at \r\n\032\032frame-source-file\r\n.*$srcfile\r\n\032\032frame-source-file-end\r\n:\r\n\032\032frame-source-line\r\n$decimal\r\n\032\032frame-source-end\r\n\r\n\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n${breakpoints_invalid}.*$gdb_prompt$" {
pass "watch triggered on a.x"
}
-re "\r\n\032\032post-prompt\r\n\r\n(\032\032breakpoints-invalid\r\n\r\n)*\032\032starting\r\n\r\n(\032\032frames-invalid\r\n\r\n)*\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n$gdb_prompt$" {
-re "\r\n\032\032post-prompt\r\n\r\n\032\032starting\r\n${frames_invalid}\r\n\032\032source .*$srcfile.*beg:$hex\r\n\r\n\032\032frame-end\r\n\r\n\032\032stopped\r\n${breakpoints_invalid}$gdb_prompt$" {
kfail "gdb/38" "watch triggered on a.x"
}
}