Binutils with MCST patches
Go to file
Pedro Alves 9c97429fb1 All annotate_breakpoints_changed calls are along-side
observer_notify_breakpoints_changed calls.  All, except the
init_raw_breakpoint one.  But that one is actually wrong.  The
breakpoint is being constructed at that point, and hasn't been placed
on the breakpoint chain yet.  It would be better placed in
install_breakpoint, and I actually started out that way.  But once the
annotate_breakpoints_changed are parallel to the observer calls, we
can fully move annotations to observers too.

One issue is that this changes the order of annotations a bit.
Before, we'd emit the annotation, and after call "mention()" on the
breakpoint (which prints the breakpoint number, etc.).  But, we call
the observers _after_ mention is called, so the annotation output will
change a little:

void
install_breakpoint (int internal, struct breakpoint *b, int update_gll)
{
  add_to_breakpoint_chain (b);
  set_breakpoint_number (internal, b);
  if (is_tracepoint (b))
    set_tracepoint_count (breakpoint_count);
  if (!internal)
    mention (b);
  observer_notify_breakpoint_created (b);

  if (update_gll)
    update_global_location_list (1);
}

I believe this order doesn't really matter (the frontend needs to wait
for the prompt anyway), so I just adjust the expected output in the
tests.  Emacs in annotations mode doesn't seem to complain.  Couple
that with the previous patch that suppressed duplicated annotations,
and, the fact that some annotations calls were actually missing (were
we do have observer calls), more changes to the tests are needed
anyway.

Tested on x86_64 Fedora 17.

gdb/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* annotate.c (annotate_breakpoints_changed): Rename to ...
	(annotate_breakpoints_invalid): ... this.  Make static.
	(breakpoint_changed): Adjust.
	(_initialize_annotate): Always install the observers.  Install a
	"breakpoint_created" observer.
	* annotate.h (annotate_breakpoints_changed): Delete declaration.
	* breakpoint.c (set_breakpoint_condition)
	(breakpoint_set_commands, do_map_commands_command)
	(init_raw_breakpoint, clear_command, set_ignore_count)
	(enable_breakpoint_disp): No longer call
	annotate_breakpoints_changed.

gdb/testsuite/
2013-01-22  Pedro Alves  <palves@redhat.com>

	* gdb.base/annota1.exp (breakpoints_invalid): New variable.
	Adjust tests to breakpoints-invalid changes.
	* gdb.cp/annota2.exp (breakpoints_invalid, frames_invalid): New
	variables.
	Adjust tests to breakpoints-invalid changes.
2013-01-22 20:19:40 +00:00
bfd daily update 2013-01-21 23:00:04 +00:00
binutils PR binutils/15026 2013-01-18 13:14:35 +00:00
config Remove "-I" from LIBSTDCXX_RAW_CXX_LDFLAGS 2013-01-07 18:25:13 +00:00
cpu Add copyright notices 2012-12-10 12:48:03 +00:00
elfcpp Add copyright notices 2012-12-17 16:56:12 +00:00
etc
gas Support size relocation only for ELF 2013-01-18 16:37:08 +00:00
gdb All annotate_breakpoints_changed calls are along-side 2013-01-22 20:19:40 +00:00
gold gold: enable new dtags by default 2013-01-18 17:44:31 +00:00
gprof Rotate binutils ChangeLog for 2013 2013-01-02 17:06:32 +00:00
include include/opcode/ 2013-01-17 16:09:44 +00:00
intl
ld ld: enable new dtags by default for linux/gnu targets 2013-01-21 08:21:46 +00:00
libdecnumber Merge from GCC. 2012-11-11 10:59:50 +00:00
libiberty merge from gcc 2013-01-07 20:28:44 +00:00
opcodes include/opcode/ 2013-01-17 16:09:44 +00:00
readline Remove some extraneous changes in readline/terminal.c 2012-10-18 18:55:41 +00:00
sim Remove debug output 2013-01-17 09:44:53 +00:00
texinfo
.cvsignore
.gitignore Sync the root .gitignore file with GCC's. 2013-01-11 15:17:35 +00:00
COPYING
COPYING.LIB
COPYING.LIBGLOSS 2013-01-07 Jeff Johnston <jjohnstn@redhat.com> 2013-01-07 21:39:26 +00:00
COPYING.NEWLIB
COPYING3
COPYING3.LIB
ChangeLog * configure.ac: Sync with GCC repo. 2013-01-15 21:47:02 +00:00
MAINTAINERS
Makefile.def * configure.ac: Sync with GCC repo. 2013-01-15 21:47:02 +00:00
Makefile.in * configure.ac: Sync with GCC repo. 2013-01-15 21:47:02 +00:00
Makefile.tpl * Makefile.tpl (BOOT_ADAFLAGS): Remove -gnata. 2013-01-11 11:48:54 +00:00
README
README-maintainer-mode
compile
config-ml.in
config.guess * config.guss: Update from config repo. 2013-01-08 22:42:34 +00:00
config.rpath
config.sub * config.sub: Update from config repo. 2013-01-11 12:57:41 +00:00
configure * configure.ac: Sync with GCC repo. 2013-01-15 21:47:02 +00:00
configure.ac * configure.ac: Sync with GCC repo. 2013-01-15 21:47:02 +00:00
depcomp
djunpack.bat
install-sh
libtool.m4 PR target/38607 2012-09-14 23:55:22 +00:00
ltgcc.m4
ltmain.sh
ltoptions.m4
ltsugar.m4
ltversion.m4
lt~obsolete.m4
makefile.vms
missing
mkdep
mkinstalldirs
move-if-change
setup.com
src-release
symlink-tree
ylwrap

README

		   README for GNU development tools

This directory contains various GNU compilers, assemblers, linkers, 
debuggers, etc., plus their support routines, definitions, and documentation.

If you are receiving this as part of a GDB release, see the file gdb/README.
If with a binutils release, see binutils/README;  if with a libg++ release,
see libg++/README, etc.  That'll give you info about this
package -- supported targets, how to use it, how to report bugs, etc.

It is now possible to automatically configure and build a variety of
tools with one command.  To build all of the tools contained herein,
run the ``configure'' script here, e.g.:

	./configure 
	make

To install them (by default in /usr/local/bin, /usr/local/lib, etc),
then do:
	make install

(If the configure script can't determine your type of computer, give it
the name as an argument, for instance ``./configure sun4''.  You can
use the script ``config.sub'' to test whether a name is recognized; if
it is, config.sub translates it to a triplet specifying CPU, vendor,
and OS.)

If you have more than one compiler on your system, it is often best to
explicitly set CC in the environment before running configure, and to
also set CC when running make.  For example (assuming sh/bash/ksh):

	CC=gcc ./configure
	make

A similar example using csh:

	setenv CC gcc
	./configure
	make

Much of the code and documentation enclosed is copyright by
the Free Software Foundation, Inc.  See the file COPYING or
COPYING.LIB in the various directories, for a description of the
GNU General Public License terms under which you can copy the files.

REPORTING BUGS: Again, see gdb/README, binutils/README, etc., for info
on where and how to report problems.