PR target/37137
* Makefile.def (flags_to_pass): Remove redundant and incomplete
STAGE1_CFLAGS, STAGE2_CFLAGS, STAGE3_CFLAGS, and STAGE4_CFLAGS.
Add FLAGS_FOR_TARGET and BUILD_CONFIG.
(bootstrap_stage): Remove bootstrap-debug custom stages. Turn
stage_configureflags, stage_cflags and stage_libcflags into
explicit Makefile macros.
* Makefile.tpl (HOST_EXPORTS, EXTRA_HOST_FLAGS): Pass GCJ and
GFORTRAN.
(POSTSTAGE1_HOST_EXPORTS): Add XGCC_FLAGS_FOR_TARGET and TFLAGS to
CC. Set CC_FOR_BUILD from CC.
(BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS,
NORMAL_TARGET_EXPORTS): Move SYSROOT_CFLAGS_FOR_TARGET and
DEBUG_PREFIX_CFLAGS_FOR_TARGET from CFLAGS and CXXFLAGS to
XGCC_FLAGS_FOR_TARGET. Add it along with TFLAGS to CC, CXX, GCJ,
and GFORTRAN.
(TFLAGS, STAGE_CFLAGS, STAGE_TFLAGS, STAGE_CONFIGURE_FLAGS): New.
(_LIBCFLAGS): Renamed to _TFLAGS.
(do-compare-debug, do-compare3-debug): Drop.
(CC, GCC_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET,
GCJ_FOR_TARGET, GFORTRAN_FOR_TARGET): Remove FLAGS_FOR_TARGET.
(FLAGS_FOR_TARGET, SYSROOT_CFLAGS_FOR_TARGET,
DEBUG_PREFIX_CFLAGS_FOR_TARGET): Move down.
(XGCC_FLAGS_FOR_TARGET): New.
(BASE_FLAGS_TO_PASS): Pass STAGEid_CFLAGS, STAGEid_TFLAGS and TFLAGS.
(EXTRA_HOST_FLAGS): Pass GCJ and GFORTRAN.
(POSTSTAGE1_FLAGS_TO_PASS): Move SYSROOT_CFLAGS_FOR_TARGET and
DEBUG_PREFIX_CFLAGS_FOR_TARGET from CFLAGS, CXXFLAGS, LIBCFLAGS,
LIBCXXFLAGS to XGCC_FLAGS_FOR_TARGET. Add it along with TFLAGS
to CC, CXX, GCJ, and GFORTRAN. Pass XGCC_FLAGS_FOR_TARGET and
TFLAGS.
(BUILD_CONFIG): Include if requested.
(all): Set TFLAGS on bootstrap.
(configure-stageid-prefixmodule): Pass TFLAGS, adjust FLAGS.
(all-stageid-prefixmodule): Likewise.
(do-clean, distclean-stageid): Set TFLAGS.
(restrap): Fix whitespace.
* Makefile.in: Rebuilt.
config/ChangeLog:
* multi.m4: Save CXX, GFORTRAN and GCJ in config.status.
* mt-gnu (CXXFLAGS_FOR_TARGET): Adjust.
* bootstrap-O1.mk: New.
* bootstrap-O3.mk: New.
* bootstrap-debug.mk: New.
(SC_PATH_TKCONFIG): Don't exit 0 if tkconfig fails.
(SC_LOAD_TCLCONFIG): Quote all uses of TCL_BIN_DIR, it may contain
"# no Tcl configs found".
(SC_LOAD_TKCONFIG): Similarily for TK_BIN_DIR.
* gdb/configure.ac (gdbkt): Check both no_tcl/no_tk first, before
doing any further tcl/tk configury. Don't configure gdbtk if
tcl or tk check fails.
* gdb/aclocal.m4: Regenerate.
* gdb/configure: Regenerate.
* gdb/gdbtk/plugins/aclocal.m4: Regenerate.
* gdb/gdbtk/plugins/configure: Regenerate.
2008-11-21 Kai Tietz <kai.tietz@onevision.com>
Fix PR/25502
* mh-mingw (BOOT_CFLAGS): Add -Wno-pedantic-ms-format switch.
2008-11-12 Steve Ellcey <sje@cup.hp.com>
PR target/27880
* unwind_ipinfo.m4 (GCC_CHECK_UNWIND_GETIPINFO): Change from
link test to target based test.
* configure: Regenerate.
config/
* mt-mips16-compat: New file, taken from mt-mips-elfoabi.
* mt-mips-elfoabi: Include mt-mips16-compat.
* mt-mips-gnu: New file.
config/
* override.m4: Use m4_version_prereq throughout.
(_AC_ARG_VAR_VALIDATE, AC_MSG_FAILURE): Backport from git
Autoconf: output pwd along with fatal errors, so the right
config.log file is hinted at more prominently.
(PARSE_ARGS): Push setting of ac_pwd in this diversion.
(_GCC_AUTOCONF_VERSION): New, define to 2.59 if not defined.
(_GCC_AUTOCONF_VERSION_CHECK): New macro, require use of Autoconf
version _GCC_AUTOCONF_VERSION throughout the tree.
(m4_wrap): New override, fix for Posix semantics of m4wrap.
binutils/
* configure: Regenerate.
opcodes/
* configure: Regenerate.
bfd/
* configure: Regenerate.
gas/
* configure: Regenerate.
gprof/
* configure: Regenerate.
ld/
* config.in: Regenerate.
* configure: Regenerate.
Sync with gcc:
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/35457
* configure.ac: Include override.m4.
* configure: Regenerate.
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (restrap): Call `make all' using double-colon rules.
* Makefile.in: Regenerate.
2008-04-11 Eric B. Weddington <eweddington@cso.atmel.com>
* configure.ac: Do not build libssp for the AVR.
* configure: Regenerate.
config:
2008-04-18 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/35457
* override.m4: Add this. Make sure aclocal always picks it.
Add more lenient precious variable check, backported from
autoconf trunk.
* acx.m4 (ACX_CHECK_CYGWIN_CAT_WORKS): New macro to check that
cygwin builds are not running in textmode.
* configure.ac: Run ACX_CHECK_CYGWIN_CAT_WORKS for cygwin hosted
builds.
* configure: Regenerate.
PR bootstrap/32009
PR bootstrap/32161
* configure.ac (CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Compute here.
* configure: Regenerate.
* Makefile.def: Define stage_libcflags for all bootstrap stages.
* Makefile.tpl (BOOT_LIBCFLAGS, STAGE2_LIBCFLAGS, STAGE3_LIBCFLAGS,
STAGE4_LIBCFLAGS): New.
(CFLAGS_FOR_TARGET, CXXFLAGS_FOR_TARGET): Subst from autoconf, without
$(SYSROOT_CFLAGS_FOR_TARGET) and $(DEBUG_PREFIX_CFLAGS_FOR_TARGET).
(BASE_TARGET_EXPORTS): Append them here to C{,XX}FLAGS.
(EXTRA_TARGET_FLAGS): Append them here to {LIB,}C{,XX}FLAGS.
(configure-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags
for target modules. Don't export LIBCFLAGS.
(all-stage[+id+]-[+prefix+][+module+]): Pass stage_libcflags; pass
$(BASE_FLAGS_TO_PASS) where [+args+] was passed, and [+args+] after
the overridden CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
(invocations of `all'): Replace $(TARGET_FLAGS_TO_PASS) with
$(EXTRA_TARGET_FLAGS), $(FLAGS_TO_PASS) with $(EXTRA_HOST_FLAGS).
* Makefile.in: Regenerate.
config:
2008-02-20 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/32009
* mh-ppc-darwin (BOOT_CFLAGS): Reenable.
2007-04-11 Kai Tietz <kai.tietz@onevision.com>
* stdint.m4: Make template compatible with older cygwin
types.h, wrapping each type in a __XXX_t_defined #ifdef.
* configure: Rebuilt.
config/ChangeLog:
* acx.m4 (NCN_STRICT_CHECK_TOOLS): Mark environment variable as
precious. Prefer it over a cached value. Use cached value
verbosely.
(NCN_STRICT_CHECK_TARGET_TOOLS): Likewise. Don't override
environment variable with build-time tools.
* configure.in: Change == to = in test command.
* configure: Regenerate.
2007-01-11 Paolo Bonzini <bonzini@gnu.org>
* warnings.m4: Use m4_expand_once to clear the AC_SUBST'ed variable.
(ACX_PROG_CC_WARNINGS_ARE_ERRORS): Fix typo. Add optional 2nd argument.
Sync with gcc:
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Reorganize recognition of languages. Add
--enable-stage1-languages. Show supported languages for the chosen
target rather than all recognized languages.
* configure: Regenerate.
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* Makefile.tpl (GCC_STRAP_TARGETS, all-prebootstrap): Remove.
* Makefile.in: Regenerate.
2006-12-29 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Warn that MPFR 2.2.0 is buggy.
* configure: Regenerate.
config:
2006-12-29 Paolo Bonzini <bonzini@gnu.org>
* acx.m4: Sync with gcc.
Sync with gcc:
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Remove "$build" case for powerpc-*-darwin* since
it only affects bootstrap and could be tested on "$host" as well.
* configure: Regenerate.
* config/mh-ppc-darwin: Add to the stage1 cflags here.
2006-12-19 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/29544
* Makefile.def (flags_to_pass): Add STAGE1_CHECKING.
(bootstrap_stage): Add STAGE1_CHECKING to stage1 configure flags,
move here comment from Makefile.tpl.
* Makefile.tpl: Move some definitions higher in the file.
(STAGE1_CHECKING): New.
* configure.in: Add --enable-stage1-checking.
* configure: Regenerate.
* Makefile.in: Regenerate.
2006-12-03 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Update error message for missing GMP/MPFR.
* configure: Regenerate.
2006-12-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Update MPFR version in error message.
* configure: Regenerate.
2006-11-26 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in (--with-mpfr-dir, --with-gmp-dir): Remove flags.
(--with-mpfr-include, --with-mpfr-lib, --with-gmp-include,
--with-gmp-lib): New flags.
* configure: Regenerate.
config:
2006-12-04 Eric Botcazou <ebotcazou@libertysurf.fr>
* tls.m4 (GCC_CHECK_TLS): Do not test TLS with static linking
if static linking doesn't even work.
2006-07-04 Eric Botcazou <ebotcazou@libertysurf.fr>
PR bootstrap/18058
* configure.in: Add -fkeep-inline-functions to CFLAGS for stage 1
if the bootstrap compiler is a GCC version that supports it.
* configure: Regenerate.
config:
2006-07-21 David Daney <ddaney@avtrex.com>
PR libgcj/28426
* gxx-include-dir.m4: Use target_alias in path for cross build.
PR build/26188
* stdint.m4: Test for uintptr_t even on systems with uint64_t or uint32_t.
Sync from GCC
2006-07-21 Steve Ellcey <sje@cup.hp.com>
PR target/26792
* unwind_ipinfo.m4: New.
* Makefile.tpl (configure-stageN-MODULE): Pass --with-build-libsubdir
for stages after the first.
* Makefile.in: Regenerate.
config:
2006-07-19 Paolo Bonzini <bonzini@gnu.org>
* acx.m4: Support --with-build-libsubdir and AC_SUBST
build_libsubdir.
Andreas Schwab <schwab@suse.de>
* configure: Regenerate.
config:
2006-02-14 Paolo Bonzini <bonzini@gnu.org>
Andreas Schwab <schwab@suse.de>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Use correct program name.
(ACX_CHECK_INSTALLED_TARGET_TOOL): Likewise, and always set $1.
* configure.in: Set with_gnu_as, with_gnu_ld, with_newlib earlier.
Set md_exec_prefix. Use ACX_CHECK_INSTALLED_TARGET_TOOL to find
the assembler, linker and binutils.
* configure: Regenerate.
config:
2006-01-16 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (NCN_STRICT_CHECK_TARGET_TOOLS): Test $with_build_time_tools.
(ACX_PATH_SEP): New.
(ACX_TOOL_DIRS): Move here from the gcc directory.
(ACX_CHECK_INSTALLED_TARGET_TOOL): New.
(GCC_TARGET_TOOL): Do not use a host tool if we found a target tool
with a complete path in either $with_build_time_tools or $exec_prefix.
Revert Ada-related part of the previous change.
* Makefile.def (ADAFLAGS, BOOT_ADAFLAGS, ADAFLAGS_FOR_TARGET):
Do not pass.
* Makefile.tpl (BOOT_ADAFLAGS): Do not define.
* Makefile.in: Regenerate.
* configure.in: Do not include mt-ppc-aix target fragment.
* configure: Regenerate.
config:
2005-12-20 Paolo Bonzini <bonzini@gnu.org>
Revert Ada-related part of the previous change.
* mt-ppc-aix: Delete.
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
Sync with gcc:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4,
CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove
"CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below.
Find in-tree tools if available.
(EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them.
(CONFIGURED_*_FOR_TARGET): Don't set nor substitute.
(*_FOR_TARGET): Set them with GCC_TARGET_TOOL.
(COMPILER_*_FOR_TARGET): New.
* Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs.
(BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols.
(CONFIGURED_*, USUAL_*): Remove.
(BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO,
STRIP): Use autoconf substitutions.
(COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET,
COMPILER_NM_FOR_TARGET): New.
(EXTRA_HOST_FLAGS): Pass LIPO and STRIP.
(all): Make all-host and all-target in parallel.
(do-[+make_target+], do-check, install, [+compare-target+]): Ensure
that $$r and $$s are set before invoking a recursive make.
(stage[+id+]-bubble): Likewise, and invoke the comparison at the end.
([+bootstrap-target+]): Inline most of the `all' target.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc
from the gcc build directory.
* Makefile.in: Regenerate.
2005-11-29 Ben Elliston <bje@au.ibm.com>
* Makefile.def: Add new libdecnumber host_module. Make all-gcc
depend on all-libdecnumber.
* configure.in (host_libs): Include libdecnumber.
* Makefile.in: Regenerate.
* configure: Likewise.
2005-11-21 Kean Johnston <jkj@sco.com>
* config.sub, config.guess: Sync from upstream sources.
config:
2005-12-05 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (GCC_TARGET_TOOL): New.
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* configure.in: Replace NCN_STRICT_CHECK_TOOL with
NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
Look for alternate names of the target cc and c++
config:
2005-08-12 Paolo Bonzini <bonzini@gnu.org>
* config/acx.m4 (NCN_CHECK_TARGET_TOOL, NCN_STRICT_CHECK_TOOL,
NCN_STRICT_CHECK_TARGET_TOOL): Remove.
(NCN_STRICT_CHECK_TOOLS, NCN_STRICT_CHECK_TARGET_TOOLS): New,
Sync from gcc:
2005-04-22 Bernd Schmidt <bernd.schmidt@analog.com>
* config.sub: Update from master copy.
2005-04-19 Hans-Peter Nilsson <hp@axis.com>
* configure.in <crisv32-*-*, cris-*-*>: New local variable
libgcj_ex_libffi. Have specific match for *-*-linux*. Separate
matches for "*-*-aout" and "*-*-elf". Don't disable libffi for
"*-*-elf" and "*-*-linux*".
* configure: Regenerate.
config:
2005-04-29 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_GNAT): Remove stray break.
* Makefile.def: Remove libstdcxx_incdir, libsubdir, gxx_include_dir,
gcc_version, and gcc_version_trigger from set of flags to pass.
* Makefile.tpl: Remove definitions of above variables.
(config.status): Remove dependency on $(gcc_version_trigger).
* Makefile.in: Regenerate.
* configure.in: Do not reference config/gcc-version.m4 nor
config/gxx-include-dir.m4. Do not invoke TL_AC_GCC_VERSION nor
TL_AC_GXX_INCLUDE_DIR. Do not set gcc_version_trigger.
* configure: Regenerate.
config:
* gxx-include-dir.m4: In all substitutions, leave $(gcc_version)
to be expanded by the Makefile.
Sync from gcc.
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* Makefile.def (target_modules): Remove "stage", now unnecessary.
* Makefile.tpl (HOST_SUBDIR): New substitution.
(STAGE_HOST_EXPORTS, EXPECT, HOST_LIB_PATH, USUAL_AR_FOR_TARGET,
USUAL_AS_FOR_TARGET, USUAL_DLLTOOL_FOR_TARGET, USUAL_GCC_FOR_TARGET,
USUAL_LD_FOR_TARGET, USUAL_NM_FOR_TARGET, USUAL_OBJDUMP_FOR_TARGET,
USUAL_RANLIB_FOR_TARGET, USUAL_WINDRES_FOR_TARGET): Use it.
(Host modules, Bootstrapped modules): Use it.
(Build modules, Target modules): Do not create symlink trees,
always configure out-of-srcdir.
(distclean): Try removing $(host_subdir) with rm before using rm -rf.
* configure.in (FLAGS_FOR_TARGET, CC_FOR_TARGET, GCJ_FOR_TARGET,
GFORTRAN_FOR_TARGET, CXX_FOR_TARGET, RAW_CXX_FOR_TARGET): Use
$(HOST_SUBDIR). Create a symlink for host_subdir.
* Makefile.in: Regenerate.
* configure: Regenerate.
Merged from libada-gnattools-branch:
2004-11-28 Nathanael Nerode <neroden@gcc.gnu.org>
* Makefile.def: Add gnattools as a module, depending on target-libada.
* Makefile.in: Regenerate.
* configure.in: Include gnattools in host_tools; disable it if ada
is disabled.
* configure: Regenerate.
config:
2005-02-28 Paolo Bonzini <bonzini@gnu.org>
PR bootstrap/17383
* acx.m4 (GCC_TOPLEV_SUBDIRS): Set HOST_SUBDIR if an in-src
gcc build is going.
* Add ACX_{TARGET,HOST,BUILD}_NONCANONICAL,
which do an automatic AC_SUBST on _GCC_TOPLEV_*_NONCANONICAL.
The intention is that we will migrate to these bit by bit.
2004-08-01 Robert Millan <robertmh@gnu.org>
* configure.in: Turn mt-linux into mt-gnu. Use mt-gnu and enable
libmudflap for all GNU-based systems (with Glibc).
* configure: Regenerate.
config/ChangeLog:
2004-08-01 Robert Millan <robertmh@gnu.org>
* mt-linux: Rename to ...
* mt-gnu: ... this.
* Makefile.tpl (touch-stage[+id+]): New.
(restage[+prev+]): Depend on touch-stage[+id+].
* Makefile.tpl (RECURSE_FLAGS_TO_PASS): New.
Use it throughout.
* Makefile.def: Add profile and feedback bootstrap stages.
Remove next field from bootstrap stages.
* Makefile.tpl (LN, LN_S): Substitute.
(stageN-start, stageN-end): Use double-colon rules, to
provide a hook for additional setup commands.
(distclean-stageN-gcc, restageN): Create dependencies from
[+prev+], not from [+next+].
(stageN-bubble): Add commands for successive stages from
[+prev+], using double-colon rules.
(all-stageN-gcc): Fix typo.
(stagefeedback-start, profiledbootstrap): New.
* Makefile.in: Regenerate.
* configure.in: Call ACX_PROG_LN.
* configure: Regenerate.
config/ChangeLog:
2004-06-09 Paolo Bonzini <bonzini@gnu.org>
* acx.m4 (ACX_PROG_LN): From gcc, modified to
accept a parameter.
2004-03-11 Nathanael Nerode <neroden@gcc.gnu.org>
* configure: Regenerate.
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* configure.in: Find default values for the tools as
soon as possible. Disable ada if GNAT is not found.
Emit error message about missing languages. Expand
--enable-languages=all for the gcc subdirectory.
(config)
2004-03-08 Paolo Bonzini <bonzini@gnu.org>
PR ada/14131
Move language detection to the top level.
* acx.m4 (ACX_PROG_GNAT): New macro, moved here
from the gcc subdirectory.
2004-03-09 Hans-Peter Nilsson <hp@axis.com>
* accross.m4 (AC_C_BIGENDIAN_CROSS): Compile endian probe with
"-c". Properly quote parameter for AC_MSG_ERROR.
2003-07-07 Zack Weinberg <zack@codesourcery.com>
* gettext.m4: Delete all former contents.
(ZW_GNU_GETTEXT_SISTER_DIR): New macro.
* progtest.m4: New file.
2003-07-04 Zack Weinberg <zack@codesourcery.com>
* gettext.m4: New file - copy of gettext.m4 from binutils
* configure.in: Switch more things to use maybe dependencies.
Rearrange a little. Use GCC_TOPLEV_SUBDIRS.
* configure: Regenerate.
* Makefile.tpl: Switch more things to use maybe dependencies.
* Makefile.in: Regenerate.
<config>
* config/acx.m4: Introduce _GCC_TOPLEV_NONCANONICAL_BUILD,
_GCC_TOPLEV_NONCANOICAL_HOST, _GCC_TOPLEV_NONCANONICAL_TARGET,
GCC_TOPLEV_SUBDIRS.
(NCN_STRICT_CHECK_TOOL): If program is not found and
value-if-not-found is empty, use ${ncn_tool_prefix}$2 or $2,
depending on whether build != host or not.
(NCN_STRICT_CHECK_TARGET_TOOL): Ditto, with the target prefix.
* config/mh-dgux386: remove dead code
* config/mh-hp300: remove dead code
* config/mh-hpux: remove dead code
* config/mh-hpux8: remove dead code
* config/mh-irix5: remove dead code
* config/mh-irix6: remove dead code
* config/mh-ncr3000: remove dead code
* config/mh-ncrsvr43: remove dead code
* config/mh-necv4: remove dead code
* config/mh-sco: remove dead code
* config/mh-solaris: remove dead code
* config/mh-sysv: remove dead code
* config/mh-sysv4: remove dead code
* config/mh-sysv5: remove dead code
* config/mh-irix4: remove, contains only dead code
* configure.in: delete reference to absent file
* config/mh-a68bsd: clean out dead code
* config/mh-apollo68: clean out dead code
* config/mh-cxux: clean out dead code
* config/mh-decstation: clean out dead code
* config/mh-dgux: clean out dead code
* config/mh-dgux386: clean out dead code
* config/mh-hp300: clean out dead code
* config/mh-hpux: clean out dead code
* config/mh-hpux8: clean out dead code
* config/mh-interix: clean out dead code
* config/mh-irix4: clean out dead code
* config/mh-lynxrs6k: clean out dead code
* config/mh-mingw32: clean out dead code
* config/mh-ncr3000: clean out dead code
* config/mh-ncrsvr43: clean out dead code
* config/mh-necv4: clean out dead code
* config/mh-openedition: clean out dead code
* config/mh-riscos: clean out dead code
* config/mh-sco: clean out dead code
* config/mh-sysv4: clean out dead code
* config/mh-lynxos: removed, contained only dead code
* config/mh-vaxult2: removed, contained only dead code
* config/mh-sun3: removed, contained only dead code
* configure.in: remove references to dead files
2001-10-07 Joseph S. Myers <jsm28@cam.ac.uk>
* acinclude.m4: Fix spelling error of "separate" as "seperate".
2001-05-22 Jason Merrill <jason_merrill@redhat.com>
* mt-linux (CXXFLAGS_FOR_TARGET): Lose -fvtable-thunks.
2001-01-27 Richard Henderson <rth@redhat.com>
* mt-alphaieee: New file.
2001-01-02 Laurynas Biveinis <lauras@softhome.net>
* mh-djgpp: do not set CFLAGS.
2000-08-04 Mark Elbrecht <snowball3@bigfoot.com>
* mh-djgpp: Conditionally set 'target_alias' to djgpp. Conditionally
modify 'gcc_version'.
2000-07-21 Andrew Haley <aph@cygnus.com>
* mh-ia64pic: New file.
* mt-ia64pic: New file.
Nick Clifton