This patch avoids a warning when resuming the execution of a program
that we attached to. For instance:
(gdb) attach 29989
(gdb) continue
Continuing.
warning: Mach error at "/[...]/darwin-nat.c:738" in function
"darwin_resume_thread": (os/kern) failure (0x5)
The warning is relatively harmless, but worrisome for the average
user. The warning comes from the fact that darwin_wait recorded
that the fake stop event corresponding to the suspend action was
caused by the main thread being suspended on a SIGTRAP. As a result
of this, when resuming the program's execution, we try to resume
the thread's execution as well. This is where the issue occurs,
as the thread was not in fact suspended, thus triggering the warning.
gdb/ChangeLog:
* darwin-nat.c (darwin_setup_fake_stop_event): New function.
(darwin_attach): Adjust using darwin_setup_fake_stop_event.
There were many cases were we make a system call which could fail
due to reasons outside of the debugger control. We should handle
these situations a little more gracefully than triggering an
internal error.
gdb/ChangeLog:
* darwin-nat.c (darwin_mourn_inferior): Replace call to
gdb_assert by call to MACH_CHECK_ERROR.
(darwin_attach_pid): Raise an error rather than a failed
assertion when various system calls failed. Report a warning
instead of raising a failed assertion when PREV_NOT is not NULL
after call to mach_port_request_notification.
(darwin_ptrace_me): Raise an error rather than a failed
assertion when read returns nonzero.
gdb_assert.h is already included from darwin-nat.h, so no need to
include it again...
gdb/ChangeLog:
* amd64-darwin-tdep.c: Remove #include "gdb_assert.h".
hashes around loading as-needed library. Zero them on allocation,
and restore to initial all-zero state if library not needed.
Arrange to reuse hashes if we load library again later.
* event-top.c (display_gdb_prompt): Call missing do_cleanups.
* infcmd.c (get_return_value) <!stop_regs>: Do not overwrite CLEANUP.
* symfile.c (symfile_bfd_open): New variable back_to. Do not leave
a stale cleanup. Fix double free of NAME.
* windows-nat.c (windows_delete_thread): Accept an additional
argument, the thread's exit code, and announce thread death when
print_thread_events is non-zero and we are deleting a thread that
is not the main thread.
(get_windows_debug_event): Pass thread exit code to
windows_delete_thread.
(R_149_REGNUM, E_NUM_OF_V850E2_REGS, E_SELID_1_R0_REGNUM)
(E_SELID_1_R31_REGNUM, E_SELID_2_R0_REGNUM, E_SELID_2_R31_REGNUM)
(E_SELID_3_R0_REGNUM, E_SELID_3_R31_REGNUM, E_SELID_4_R0_REGNUM)
(E_SELID_4_R31_REGNUM, E_SELID_5_R0_REGNUM, E_SELID_5_R31_REGNUM)
(E_SELID_6_R0_REGNUM, E_SELID_6_R31_REGNUM, E_SELID_7_R0_REGNUM, E_SELID_7_R31_REGNUM)
(E_VR0_REGNUM, E_VR31_REGNUM, E_NUM_OF_V850E3V5_REGS): Define.
(v850_abi, V850_ABI_GCC, V850_ABI_RH850): New enum and constants.
(gdbarch_tdep): New struct.
(v850e2_register_name): Use E_NUM_OF_V850E2_REGS instead of
E_NUM_REGS.
(v850e3v5_register_name): New function.
(v850_register_type): v850e3v5 vector registers are 64-bits wide.
(v850_use_struct_convention): Add `gdbarch' parameter. Add new
code handling the struct return conventions for the RH850 ABI.
Update all callers.
(v850_eight_byte_align_p): New function.
(v850_push_call_dummy): Push structs by value, not by reference
for the RH850 ABI. Add support for eight byte alignment.
(v850_dbtrap_breakpoint_from_pc): New function.
(v850_gdbarch_init): Add ABI detection code. Register
v850e3v5_register_name for the v850e3v5 architecture. Set the
number of registers for v850e3v5. Register
v850_dbtrap_breakpoint_from_pc as appropriate.
(_initialize_gdbarch_init): Registration bfd_arch_v850_rh850.
of bfd_count_sections.
* solib-target.c (solib_target_relocate_section_addresses): Ditto.
* symfile.c (default_symfile_offsets): Ditto.
(syms_from_objfile_1): Ditto. Make dummy addrs list an array of
one entry, not bfd_count_sections entries.
`save' and `restore' register groups. Don't include SPL
or SPH in these groups.
(rl78_dwarf_reg_to_regnum): Adjust mapping for
RL78_PC_REGNUM. Add mappings for RL78_PSW_REGNUM,
RL78_ES_REGNUM, and RL78_CS_REGNUM.
(rl78_gdbarch_init): Set `dwarf2_addr_size' to 4. Invoke
dwarf2_append_unwinders().
* tracepoint.c (cmd_qtinit): Call 'stop_tracing'.
2013-05-03 Hafiz Abid Qadeer <abidh@codesourcery.com>
* status-stop.exp (test_tstart_tstart): Check for error
returned by the second 'tstart' command.
PR ld/15365
* layout.cc (Layout::finalize): Make __ehdr_start STV_HIDDEN.
ld/
PR ld/15365
* emultempl/elf32.em (gld${EMULATION_NAME}_before_allocation):
Restrict __ehdr_start's export class to no less than STV_HIDDEN.
ld/testsuite/
PR ld/15365
* ld-elf/ehdr_start.d: Expect __ehdr_start to be STB_LOCAL.
* ld-mips-elf/ehdr_start-1.nd: New test.
* ld-mips-elf/ehdr_start-2.nd: New test.
* ld-mips-elf/ehdr_start-1.ld: New test linker script.
* ld-mips-elf/ehdr_start-2.ld: New test linker script.
* ld-mips-elf/ehdr_start-new.s: New test source.
* ld-mips-elf/ehdr_start-o32.s: New test source.
* ld-mips-elf/mips-elf.exp: Run the new tests.
* ld-elf/provide-hidden-abs.nd: New test.
* ld-elf/provide-hidden-def.nd: New test.
* ld-elf/provide-hidden-dyn.nd: New test.
* ld-elf/provide-hidden-sec.nd: New test.
* ld-elf/provide-hidden-dynabs.nd: New test.
* ld-elf/provide-hidden-dynsec.nd: New test.
* ld-elf/provide-hidden-s.ld: New test linker script.
* ld-elf/provide-hidden-1.ld: New test linker script.
* ld-elf/provide-hidden-2.ld: New test linker script.
* ld-elf/provide-hidden-1.s: New test source.
* ld-elf/provide-hidden-2.s: New test source.
* ld-elf/provide-hidden-3.s: New test source.
* ld-elf/provide-hidden-4.s: New test source.
* ld-elf/provide-hidden.exp: New test script.
* config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
(s_mips_stab): Do not restrict to stabn only.
gas/testsuite/
* gas/mips/mips16-stabs.s, gas/mips/mips16-stabs.d: New test.
* gas/mips/mips.exp: Run it.
* config.bfd (msp430): Define targ_selvecs.
* configure.in: Add bfd_elf32_msp430_ti_vec.
* cpu-msp430.c: Add some more MSP430 machine numbers.
* elf32-msp430.c Add support for MSP430X relocations.
Add support for TI compiler generated relocations.
Add support for sym_diff relocations.
Add support for relaxing out of range short branches into long
branches.
Add support for MSP430 attribute section.
* reloc.c: Add MSP430X relocations.
* targets.c: Add bfd_elf32_msp430_ti_vec.
* bfd-in2.h: Regenerate.
* configure: Regenerate.
* libbfd.h: Regenerate.
* readelf.c: Add support for MSP430X architecture.
* readelf.exp: Expect -wi test to fail for the MSP430.
* config/tc-msp430.c: Add support for the MSP430X architecture.
Add code to insert a NOP instruction after any instruction that
might change the interrupt state.
Add support for the LARGE memory model.
Add code to initialise the .MSP430.attributes section.
* config/tc-msp430.h: Add support for the MSP430X architecture.
* doc/c-msp430.texi: Document the new -mL and -mN command line
options.
* NEWS: Mention support for the MSP430X architecture.
* gas/all/gas.exp: Skip the DIFF1 test for the MSP430.
Expect the FORWARD test to pass for the MSP430.
Skip the REDEF tests for the MSP430.
Expect the 930509A test to fail for the MSP430.
* gas/all/sleb128-4.d: Skip for the MSP430.
* gas/elf/elf.exp: Set target_machine to msp430 for the MSP430.
Skip the EHOPT0 test for the MSP430.
Skip the REDEF and EQU-RELOC tests for the MSP430.
* gas/elf/section2.e-msp430: New file.
* gas/lns/lns-big-delta.d: Remove expectation of 20-bit
addresses.
* gas/lns/lns.exp: Use alternate LNS COMMON test for the MSP430.
* gas/msp430/msp430x.s: New test.
* gas/msp430/msp430x.d: Expected disassembly.
* gas/msp430/msp430.exp: Run new test.
* gas/msp430/opcode.d: Update expected disassembly.
* msp430.h: Add MSP430X relocs.
Add some more MSP430 machine numbers.
Add values used by .MSP430.attributes section.
* msp430.h: Add patterns for MSP430X instructions.
* Makefile.am: Add emsp430X.c
* Makefine.in: Regenerate.
* configure.tgt (msp430): Add msp430X emulation.
* ldmain.c (multiple_definition): Only disable relaxation if it
was enabled by the user.
* ldmain.h (RELAXATION_ENABLED_BY_USER): New macro.
* emulparams/msp430all.sh: Add support for MSP430X.
* emultempl/generic.em: (before_parse): Enable relaxation for the
MSP430.
* scripttempl/msp430.sc: Reorganize sections. Add .rodata
section.
* scripttempl/msp430_3.sc: Likewise.
* NEWS: Mention support for MSP430X.
* ld-elf/flags1.d: Expect this test to pass on the MSP430.
* ld-elf/init-fini-arrays.d: Expect this test to fail on the
MSP430.
* ld-elf/merge.d: Expect this test to pass on the MSP430.
* ld-elf/sec64k.exp: Skip these tests for the MSP430.
* ld-gc/pr13683.d: Expect this test to fail on the MSP430.
* ld-srec/srec.exp: Expect these tests to fail on the MSP430.
* ld-undefined/undefined.exp: Expect the UNDEFINED LINE test to
fail on the MSP430.
* msp430-dis.c: Add support for MSP430X instructions.
* config.bfd: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
binutils/testsuite/
* lib/binutils-common.exp (is_elf_format): Also exclude
*-*-linux*ecoff*.
gas/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*.
ld/
* configure.tgt: Replace alpha*-*-linuxecoff* pattern with
alpha*-*-linux*ecoff*. Update the `sed' pattern used to convert
from alpha*-*-linux-* to alpha*-*-linux*ecoff*.
gdb/ChangeLog:
* darwin-nat.c (darwin_read_write_inferior): Change types
of parameters rdaddr and wraddr to "gdb_byte *". Change type
of copy_count to "mach_msg_type_number_t".
(darwin_read_dyld_info): Change type of parameter
rdaddr to "gdb_byte *".
gdb/ChangeLog:
* ia64-tdep.c (ia64_access_fpreg): Change cast of val
from "char *" to "gdb_byte *".
(ia64_access_rse_fpreg, ia64_access_mem): Likewise.
Catherine Moore
Joel Brobecker
Alan Modra
gdbadmin
Jan Kratochvil
Eli Zaretskii
Richard Sandiford
Kevin Buettner
Doug Evans
Philippe Waroquiers
Hafiz Abid Qadeer
Maciej W. Rozycki
Nick Clifton
H.J. Lu
Cary Coutant
Chao-ying Fu