The current ObjC logic will check both the symbol name and the target
address space when trying to locate an appropriate selector. The problem
is that first the target address space is checked before the symbol name.
This may lead to a lot of unnecessary host<->target transactions when
dealing with a non-OjbC target that does use function descriptors to
describe functions as every symbol will have its FD read just to have the
result thrown away with non-matching symbol names.
It also may lead to problems when a non-FD symbol is found that points near
the end of the address space as the target will throw up a memory_error().
One such example are symbols that are not functions, smaller than a FD,
and are the last valid location. Obviously treating it as a larger data
struct can cause memory overflows.
So to speed things up and not screw over such targets, check the symbol
name (which we already have locally) first before attempting to read the
function's descriptor. This fixes breakpoints with Blackfin Linux FDPIC
ELFs, and seems to cause no native regressions on my x86_64/Linux system.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
There is an architecture-info flag for listing possible arch values, but
there is on equivalent for listing possible model values. So add the
equivalent for models.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* gdb.base/solib-display.exp: Replace gdb_exit, gdb_start,
gdb_reinitialize_dir and gdb_load by clean_restart. Remove trailing
gdb_exit and return.
(executable): New variable.
(binfile): Use it.
Implement `save-breakpoints'.
gdb/
* breakpoint.c (save_cmdlist): New.
(breakpoint_set_cmdlist, breakpoint_show_cmdlist): Moved up close
to save_cmdlist.
(print_recreate_catch_fork): New.
(catch_fork_breakpoint_ops): Install it.
(print_recreate_catch_vfork): New.
(catch_vfork_breakpoint_ops): Install it.
(print_recreate_catch_syscall): New.
(catch_syscall_breakpoint_ops): Install it.
(print_recreate_catch_exec): New.
(catch_exec_breakpoint_ops): Install it.
(print_recreate_exception_catchpoint): New.
(gnu_v3_exception_catchpoint_ops): Install it.
(save_breakpoints): New, based on tracepoint_save_command, but
handle all breakpoint types.
(save_breakpoints_command): New.
(tracepoint_save_command): Rename to...
(save_tracepoints_command): ... this, and reimplement using
save_breakpoints.
(save_command): New.
(_initialize_breakpoints): Install the "save" command prefix.
Install the "save breakpoints" command. Make "save-tracepoints" a
deprecated alias for "save tracepoints".
* breakpoint.h (struct breakpoint_ops): New field `print_recreate'.
* ada-lang.c (print_recreate_exception): New.
(print_recreate_catch_exception): New.
(catch_exception_breakpoint_ops): Install it.
(print_recreate_catch_exception_unhandled): New.
(catch_exception_unhandled_breakpoint_ops): Install it.
(print_recreate_catch_assert): New.
(catch_assert_breakpoint_ops): Install it.
* NEWS: Mention the new `save breakpoints' command. Mention the
new `save tracepoints' alias and that `save-tracepoints' is now
deprecated.
gdb/doc/
* gdb.texinfo (Save Breakpoints): New node.
(save-tracepoints): Rename to ...
(save tracepoints): ... this. Mention that `save-tracepoints' is
a deprecated alias to `save tracepoints'.
gdb/testsuite/
* gdb.trace/save-trace.exp: Adjust.
* tui/tui-out.c: Include cli-out.h.
(tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
(tui_begin, tui_end, tui_field_int, tui_field_skip)
(tui_field_string, tui_field_fmt, tui_spaces, tui_text)
(tui_message, tui_wrap_hint, tui_flush): Delete forward
declarations.
(struct ui_out_data): Rename to...
(struct tui_ui_out_data): ... this. Remove `stream' and
`suppress_output' fields, and inherit cli_ui_out_data.
(tui_out_data): New typedef.
(tui_ui_out_impl): Don't initialize fields staticaly.
(tui_table_begin, tui_table_body, tui_table_end, tui_table_header)
(tui_begin, tui_end): Delete.
(tui_field_int): Adjust to delegate most work to the base type.
(tui_field_skip): Delete.
(tui_field_string, tui_field_fmt): Adjust comment. Adjust to
delegate most work to the base type.
(tui_spaces): Delete.
(tui_text): Adjust to delegate most work to the base type.
(tui_message): Delete.
(tui_wrap_hint): Delete.
(tui_flush): Delete.
(out_field_fmt): Delete.
(field_separator): Delete.
(tui_out_new): Adjust to initialize the base type.
(_initialize_tui_out): Initialize tui_ui_out_impl.
* cli-out.c (struct ui_out_data): Moved out to cli-out.h, renamed
cli_ui_out_data.
(cli_out_data): Adjust.
(cli_ui_out_impl): Make extern.
(cli_table_header, cli_field_int, cli_field_skip): Use
uo_field_string instead of cli_field_string.
(cli_redirect): Adjust to use cli_out_data.
(cli_out_data_ctor): New.
(cli_out_new): Use it.
* cli-out.h (struct ui_file): Remove forward declaration.
(struct cli_ui_out_data): New, moved from cli-out.c, and renamed.
(cli_ui_out_impl): Declare.
(cli_out_data_ctor): Declare.
* ui-out.c (struct ui_out) <data>: Change type to void pointer.
(uo_field_string): No longer static.
(ui_out_data): Change return type to void pointer.
(ui_out_new): Change `data' parameter type to void pointer.
* ui-out.h (struct ui_out_data): Don't forward declare.
(ui_out_data): Change return type to void pointer.
(ui_out_new): Change `data' parameter type to void pointer.
(uo_field_string): Declare.
is_hardware_watchpoint.
(watchpoints_triggered): Ditto.
(bpstat_check_location): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_check_watchpoint): Use is_watchpoint and
is_hardware_watchpoint.
(bpstat_stop_status): Fix comment.
(user_settable_breakpoint): Use is_watchpoint.
(hw_watchpoint_used_count): Use is_hardware_watchpoint.
(disable_watchpoints_before_interactive_call_start): Use
is_watchpoint.
(enable_watchpoints_after_interactive_call_stop): Use
is_watchpoint.
(clear_command): Use is_watchpoint.
(do_enable_breakpoint): Use is_watchpoint.
The recent change to reload_shared_libraries() broke FDPIC shared libraries as
the solib-frv.c code was implicitly relying on the initial order of calls
(first solib_addr() and then solib_create_inferior_hook()). It was
maintaining internal state via enable_break{1,2}_done to handle this.
While I could tweak these values a bit more, the original code wasn't terribly
bullet proof -- if during the initial debug you attempted to view shared
libraries, the enable2_break() code would whine about the ldso internal debug
addresses being unfetchable (and would actually attempt to read address 0x8 on
the target). So I've dropped this implicit dependency on order (i.e.
enable_break1_done) and updated the ldso poking code (i.e. enable_break2) to
silently return when the internal debug address is still set to 0. It will
remain this way until the ldso gets a chance to initialize at which point the
code will act the same as before.
While I have no way of testing the FRV, the Blackfin FDPIC code is using this
same base in a 100% copy & paste method since we implemented FDPIC the same
way as the FRV guys (I'll address this in the future). This fix was required
in order to handle shared libraries with Blackfin FDPIC properly, and I see no
reason why it wouldn't also work for FRV (since the uClibc ldso FDPIC code is
the same too and that's really what this is poking).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
instead of an error if no PLT entry is found. Return a
potentially useful result.
(m32c_m16c_pointer_to_address): Add code to search for function
address when no .plt entry is found.
* vms-alpha.c (_bfd_vms_slurp_eihd): Fix typo.
(_bfd_vms_get_object_record): Always assume there is a pad byte
for alignment.
* vms-lib.c: Add a few comments.
* config/tc-hppa.c (pa_ip): Do not allow 64-bit add condition
matcher to accept and unconditional 32-bit add instruction.
(pa_build_unwind_subspace): Cope with error conditions not
allowing the start symbol to be set.
* gas/hppa/basic/add2.s: Add test of simple 32-bit instruction.
* gas/hppa/basic/basic.exp (do_add2): Add grep for expected
disassembly.
* NEWS: Document new feature.
* remote.c (PACKET_qGetTIBAddr): New enum element.
(remote_get_tib_address): New function.
(init_remote_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_remote): Add add_packet_config_cmd
for PACKET_qGetTIBAddr.
* target.c (update_current_target): Set default value for
new to_get_tib_address field.
* target.h (target_ops): New field to_get_tib_address.
(target_get_tib_address): New macro.
* windows-nat.c (thread_info): Add thread_local_base field.
(windows_add_thread): Add tlb argument of type 'void *'.
(fake_create_process): Adapt windows_add_thread call.
(get_windows_debug_event): Idem.
(windows_get_tib_address): New function.
(init_windows_ops): Set to_get_tib_address field
to remote_get_tib_address.
(_initialize_windows_nat): Replace info_w32_cmdlist
initialization by a call to init_w32_command_list.
(info_w32_command, info_w32_cmdlist): Removed from here...
to windows-tdep.c file.
* windows-tdep.h (info_w32_cmdlist): Declare.
(init_w32_command_list): New external function
declaration.
* windows-tdep.c: Add several headers.
(info_w32_cmdlist): to here, made global.
(thread_information_32): New struct.
(thread_information_64): New struct.
(TIB_NAME): New char array.
(MAX_TIB32, MAX_TIB64, FULL_TIB_SIZE): New constants.
(maint_display_all_tib): New static variable.
(windows_get_tlb_type): New function.
(tlb_value_read, tlb_value_write): New functions.
(tlb_value_funcs): New static struct.
(tlb_make_value): New function.
(display_one_tib): New function.
(display_tib): New function.
(show_maint_show_all_tib):New function.
(info_w32_command): Moved from windows-nat.c.
(init_w32_command_list): New function.
(_initialize_windows_tdep): New function.
New "maint set/show show-all-tib" command
New "$_tlb" internal variable.
gdbserver/ChangeLog entry:
* server.c (handle_query): Handle 'qGetTIBAddr' query.
* target.h (target_ops): New get_tib_address field.
* win32-low.h (win32_thread_info): Add thread_local_base field.
* win32-low.c (child_add_thread): Add tlb argument.
Set thread_local_base field to TLB.
(get_child_debug_event): Adapt to child_add_thread change.
(win32_get_tib_address): New function.
(win32_target_ops): Set get_tib_address field to
win32_get_tib_address.
* linux-low.c (linux_target_ops): Set get_tib_address field to NULL.
doc/ChangeLog entry:
gdb.texinfo ($_tlb): Document new automatic convinience variable.
(info w32 thread-information-block): Document new command.
(qGetTIBAddress): Document new gdbserver query.
(maint set/show show-all-tib): Document new command.
* frame.c: Include tracepoint.h.
(get_current_frame): Allow a trace frame to be an alternate source
of stack frame data.
* tracepoint.c (tfind_1): Don't try to get current stack frame if
it won't succeed.
* arm.cc (Arm_output_section::fix_exidx_coverage): Mark object
for local symbol recounting if we remove a section due to ICF.
* gold.cc (queue_middle_gc_tasks): Create a dummy blocker if
there are no regular objects in input.
* solib.c (free_so_symbols): New function, from ...
(free_so): ... here. Call it.
(solib_read_symbols): Don't warn here if symbols have already been
loaded.
(solib_add): Warn here instead, if a pattern was specified.
(reload_shared_libraries_1): New.
(reload_shared_libraries): Rewrite to not fetch the library list.
Mike Frysinger
Pedro Alves
Pierre Muller
Nick Clifton
Jan Kratochvil
gdbadmin
Alan Modra
H.J. Lu
Kevin Buettner
Stan Shebs
Tristan Gingold
Joel Brobecker
Doug Evans
Matthew Gretton-Dann
Doug Kwan