Correct the patterns in the gdb_test_multiple invocation.
testsuite/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* gdb.arch/s390-multiarch.exp (test_linux_v2): Add $gdb_prompt to
the patterns in gdb_test_multiple.
As suggested before, rename the S/390-related source files (tdep and nat)
such that "-linux-" occurs in the file name, like with other GNU/Linux
targets. Since no other operating system is currently supported by GDB
on this architecture, this isn't strictly necessary. But the old names
sometimes caused GDB contributors to miss these files when performing a
change that affects all GNU/Linux targets. The latest such incident was
observed here:
https://sourceware.org/ml/gdb-patches/2013-09/msg00619.html
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-tdep.h: Rename to...
* s390-linux-tdep.h: ...here.
* s390-tdep.c: Rename to...
* s390-linux-tdep.c: ...here. Adjust #include.
* s390-nat.c: Rename to...
* s390-linux-nat.c: ...here. Adjust #include.
* config/s390/s390.mh: Rename to...
* config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
s390-linux-nat.o.
* configure.host: Reflect host rename "s390" -> "linux".
* configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
* Makefile.in (ALL_TARGET_OBS): Likewise.
(HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
s390-linux-tdep.h.
(ALLDEPFILES): Reflect rename of .c files.
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-nat.c: Whitespace cleanup.
* s390-tdep.c: Likewise.
* s390-tdep.h: Remove empty line at end of file.
Currently the disassembler for s390 (by default) assumes that a 31-bit
binary was compiled in "ESA" mode -- and then only disassembles a
limited opcode set. The change upgrades the default to the full "zarch"
opcode set even for 31-bit binaries.
opcodes/
* s390-dis.c (init_disasm): Default to full 'zarch' opcode
availability even for 31-bit programs.
elfcpp/
* powerpc.h (EF_PPC64_ABI): New enum constant.
(STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Likewise.
(ppc64_decode_local_entry): New function.
(ppc64_encode_local_entry): Likewise.
gold/
* powerpc.cc (Powerpc_relobj::abiversion, set_abiversion,
ppc64_local_entry_offset, ppc64_local_entry_offset,
do_read_symbols): New functions.
(Powerpc_relobj::e_flags_, st_other_): New vars.
(Powerpc_relobj::Powerpc_relobj): Call set_abiversion.
(Powerpc_dynobj::abiversion, set_abiversion): New functions.
(Powerpc_relobj::e_flags_): New var.
(Target_powerpc::first_plt_entry_offset, plt_entry_size): Inline
and adjust for ELFv2.
(Target_powerpc::abiversion, set_abiversion, stk_toc): New functions.
(Powerpc_relobj::do_find_special_sections): Check no .opd in ELFv2.
(Powerpc_dynobj::do_find_special_sections): Likewise.
(Target_powerpc::do_define_standard_symbols): Define ".TOC.".
(Target_powerpc::Branch_info::make_stub): Adjust stub destination
to ELFv2 local entry.
(Target_powerpc::do_relax): No thread safe barriers needed for
ELFv2.
(Output_data_plt_powerpc::initial_plt_entry_size_,
plt_entry_size): Delete. Replace all uses with
first_plt_entry_offset() and plt_entry_size().
(Output_data_plt_powerpc::Output_data_plt_powerpc): Remove
reserved_size parm. Update callers.
(Output_data_plt_powerpc::entry_count): Update.
(Output_data_plt_powerpc::first_plt_entry_offset): Make private
and use Target_powerpc::first_plt_entry_offset().
(Output_data_plt_powerpc::get_plt_entry_size): Similarly and
rename to plt_entry_size.
(Output_data_plt_powerpc::add_ifunc_entry,
add_local_ifunc_entry): Adjust reloc for ELFv2.
(glink_eh_frame_fde_64): Rename to glink_eh_frame_fde_64v1.
(glink_eh_frame_fde_64v2): New.
(Stub_table::plt_call_size): Support ELFv2 sizing.
(Output_data_glink::add_eh_frame): Use the new FDE.
(Output_data_glink::set_final_data_size): Adjust for ELFv2 glink.
(Stub_table::do_write): Write ELFv2 stubs and glink.
(Target_powerpc::Relocate::relocate): Replaces nop after call
with ld 2,24(1) and adjust local offset destination for ELFv2.
This removes the DT_PPC_TLSOPT/DT_PPC64_TLSOPT dynamic tag and replaces
it with DT_PPC_OPT/DT_PPC64_OPT tag to provide the same functionality
and more. This isn't backwards compatible, but the TLSOPT tag hasn't
been used since the tls optimisation support was never submitted to
glibc.
/include/elf/
* ppc.h (DT_PPC_TLSOPT): Delete.
(DT_PPC_OPT, PPC_OPT_TLS): Define.
* ppc64.h (DT_PPC64_TLSOPT): Delete.
(DT_PPC64_OPT, PPC64_OPT_TLS, PPC64_OPT_MULTI_TOC): Define.
bfd/
* elf32-ppc.c (ppc_elf_size_dynamic_sections): Use new DT_PPC_OPT
tag to specify tls optimisation.
* elf64-ppc.c (ppc64_elf_size_dynamic_sections): Likewise.
(ppc64_elf_finish_dynamic_sections): Specify whether multiple
toc pointers are used via DT_PPC64_OPT.
binutils/
* readelf.c (get_ppc_dynamic_type): Replace PPC_TLSOPT with PPC_OPT.
(get_ppc64_dynamic_type): Replace PPC64_TLSOPT with PPC64_OPT.
The toc pointer save slot changes on ELFv2 from 40(1) to 24(1).
* elf64-ppc.c (STK_LR, STK_TOC, STK_LINKER): Define.
(savegpr0_tail, restgpr0_tail, savefpr0_tail, restfpr0_tail)
build_plt_stub, build_tls_get_addr_stub, ppc_build_one_stub,
ppc64_elf_relocate_section): Use new defines.
An ELFv2 PLT entry is simply the address of the target function rather
than three (or two) words to specify entry, toc and static chain. PLT
call stubs are correspondingly simpler and need no thread safety
barrier. The glink resolver stub and branch table also is simplified,
a change that could be applied to ELFv1 too, but isn't as yet.
* elf64-ppc.c (PLT_ENTRY_SIZE, PLT_INITIAL_ENTRY_SIZE): Add htab
parameter and adjust for ELFv2. Update all uses.
(PLT_CALL_STUB_SIZE): Delete.
(ppc64_elf_get_synthetic_symtab): Support new glink layout.
(allocate_dynrelocs): Likewise.
(plt_stub_size, build_plt_stub): Adjust for ELFv2.
(get_r2off): Return 0 for ELFv2 -R.
(ppc_build_one_stub, ppc_size_one_stub): Adjust for ELFv2.
(ppc64_elf_size_stubs): Likewise.
(ppc64_elf_build_stubs): Add new ELFv2 glink.
This defines the ELF symbol st_other field used to encode the number
of instructions between a function "global entry" and its "local entry",
and adds support related to the local entry offset.
include/elf/
* ppc64.h (STO_PPC64_LOCAL_BIT, STO_PPC64_LOCAL_MASK): Define.
(ppc64_decode_local_entry, ppc64_encode_local_entry): New functions.
(PPC64_LOCAL_ENTRY_OFFSET, PPC64_SET_LOCAL_ENTRY_OFFSET): Define.
bfd/
* elf64-ppc.c (struct ppc_stub_hash_entry): Add "other".
(stub_hash_newfunc): Init new ppc_stub_hash_entry field, and one
we forgot, "plt_ent".
(ppc64_elf_add_symbol_hook): Check ELFv1 objects don't have
st_other bits only valid in ELFv2.
(ppc64_elf_merge_symbol_attribute): New function.
(ppc_type_of_stub): Add local_off param to test branch range.
(ppc_build_one_stub): Adjust destinations for ELFv2 locals.
(ppc_size_one_stub, toc_adjusting_stub_needed): Similarly.
(ppc64_elf_size_stubs): Pass local_off to ppc_type_of_stub.
Set "other" field.
(ppc64_elf_relocate_section): Adjust destination for ELFv2 local
calls.
gas/
* config/tc-ppc.c (md_pseudo_table): Add .localentry.
(ppc_elf_localentry): New function.
(ppc_force_relocation): Force relocs on all branches to localenty
symbols.
(ppc_fix_adjustable): Don't reduce such symbols to section+offset.
binutils/
* readelf.c (get_ppc64_symbol_other): New function.
(get_symbol_other): Use it for EM_PPC64.
Defines bits in ELF e_flags to differentiate ELFv2 objects from ELFv2,
adds .abiversion directive to explicitly choose the ABI, and code to
check and automatically select ABI.
include/elf/
* ppc64.h (EF_PPC64_ABI): Define.
bfd/
* elf64-ppc.c (abiversion, set_abiversion): New functions.
(ppc64_elf_get_synthetic_symtab): Handle ELFv2 objects without .opd.
(struct ppc_link_hash_table): Add opd_abi.
(ppc64_elf_check_relocs): Check no .opd with ELFv2.
(ppc64_elf_merge_private_bfd_data): New function.
(ppc64_elf_print_private_bfd_data): New function.
(ppc64_elf_tls_setup): Set htab->opd_abi.
(ppc64_elf_size_dynamic_sections): Don't emit OPD related dynamic
tags for ELFv2.
(ppc_build_one_stub): Use R_PPC64_IRELATIVE for ELFv2 ifunc.
(ppc64_elf_finish_dynamic_symbol): Likewise
binutils/
* readelf.c (get_machine_flags): Display ABI version for EM_PPC64.
gas/
* config/tc-ppc.c: Include elf/ppc64.h.
(ppc_abiversion): New variable.
(md_pseudo_table): Add .abiversion.
(ppc_elf_abiversion, ppc_elf_end): New functions.
* config/tc-ppc.h (md_end): Define.
This change is to support the new ELFv2 ABI, which uses the value in
r12 on function entry to calculate the got/toc pointer.
bfd/
* elf64-ppc.c (build_plt_stub): Switch stubs to use r11 as base
reg and r12 as destination.
(ppc_build_one_stub): Likewise.
(ppc64_elf_build_stubs): Likewise for glink.
ld/testsuite/
* ld-powerpc/tls.s: Add proper .opd entry for _start.
* ld-powerpc/tlstoc.s: Likewise.
* ld-powerpc/relbrlt.d: Update for changed stubs.
* ld-powerpc/tls.d: Update for changed stubs and _start .opd entry.
* ld-powerpc/tls.g: Likewise.
* ld-powerpc/tlsexe.d: Likewise.
* ld-powerpc/tlsexe.g: Likewise.
* ld-powerpc/tlsexe.r: Likewise.
* ld-powerpc/tlsexetoc.d: Likewise.
* ld-powerpc/tlsexetoc.g: Likewise.
* ld-powerpc/tlsexetoc.r: Likewise.
* ld-powerpc/tlsso.d: Likewise.
* ld-powerpc/tlsso.g: Likewise.
* ld-powerpc/tlsso.r: Likewise.
* ld-powerpc/tlstoc.d: Likewise.
* ld-powerpc/tlstoc.g: Likewise.
* ld-powerpc/tlstocso.d: Likewise.
* ld-powerpc/tlstocso.g: Likewise.
* ld-powerpc/tlstocso.r: Likewise.
This changes the behaviour of @h and @ha on PowerPC64 to report errors
on 32-bit overflow. The motivation for this change is that on
PowerPC64, most uses of @h and @ha modifiers and their corresponding
relocations are to build up 32-bit offsets. We'd like to know when
such offsets overflow. Only rarely do people use @h or @ha with the
high 32-bit modifiers to build a 64-bit constant. Those uses will now
need to use two new modifiers, @high and @higha, if the constant isn't
known at assembly time. For now, we won't report overflow at assembly
time..
This also fixes an error when applying some of the HIGHER and HIGHEST
relocations.
include/elf/
* ppc64.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): New.
(IS_PPC64_TLS_RELOC): Match new tls relocs.
bfd/
* reloc.c (BFD_RELOC_PPC64_ADDR16_HIGH, BFD_RELOC_PPC64_ADDR16_HIGHA,
BFD_RELOC_PPC64_TPREL16_HIGH, BFD_RELOC_PPC64_TPREL16_HIGHA,
BFD_RELOC_PPC64_DTPREL16_HIGH, BFD_RELOC_PPC64_DTPREL16_HIGHA): New.
* elf64-ppc.c (ppc64_elf_howto_raw): Add entries for new relocs.
Make all _HA and _HI relocs report signed overflow.
(ppc64_elf_reloc_type_lookup): Handle new relocs.
(must_be_dyn_reloc, ppc64_elf_check_relocs): Likewise.
(dec_dynrel_count, ppc64_elf_relocate_section): Likewise.
(ppc64_elf_relocate_section): Don't apply 0x8000 adjust to
R_PPC64_TPREL16_HIGHER, R_PPC64_TPREL16_HIGHEST,
R_PPC64_DTPREL16_HIGHER, and R_PPC64_DTPREL16_HIGHEST.
* libbfd.h: Regenerate.
* bfd-in2.h: Regenerate.
gas/
* config/tc-ppc.c (SEX16): Don't mask.
(REPORT_OVERFLOW_HI): Define as zero.
(ppc_elf_suffix): Support @high, @higha, @dtprel@high, @dtprel@higha,
@tprel@high, and @tprel@higha modifiers.
(md_assemble): Ignore X_unsigned when applying 16-bit insn fields.
Add (disabled) code to check @h and @ha reloc overflow for powerpc64.
Handle new relocs.
(md_apply_fix): Similarly.
elfcpp/
* powerpc.h (R_PPC64_ADDR16_HIGH, R_PPC64_ADDR16_HIGHA,
R_PPC64_TPREL16_HIGH, R_PPC64_TPREL16_HIGHA,
R_PPC64_DTPREL16_HIGH, R_PPC64_DTPREL16_HIGHA): Define.
gold/
* powerpc.cc (Target_powerpc::Scan::check_non_pic): Handle new relocs.
(Target_powerpc::Scan::global, local): Likewise.
(Target_powerpc::Relocate::relocate): Likewise. Check for overflow
on all ppc64 @h and @ha relocs.
There's no real need to emit these always: They're needed only if we
indeed want to emit a localized symbol. Hence defer emission until we
at least did the basic early checks that would lead to no such symbol
getting emitted. This in particular avoids emitting such a symbol in
the majority of (if not all) "ld -r" cases.
I hope my set of cross build tests caught all the test cases needing
adjustment - please forgive if I missed a few.
bfd/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* elflink.c (struct elf_outext_info): Add field file_sym_done.
(bfd_elf_final_link): Initialize new field. Move fake STT_FILE
symbol emission from here ...
(elf_link_output_extsym): ... to here.
gas/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* gas/microblaze/relax_size.elf: Drop expectation of no longer
present STT_FILE symbol.
* gas/microblaze/relax_size2.elf: Likewise.
ld/testsuite/
2013-10-29 Jan Beulich <jbeulich@suse.com>
* ld-cris/tls-e-tpoffcomm1.d: Drop expectation of no longer
present STT_FILE symbol.
* ld-mmix/bpo-18.d: Likewise.
* ld-mmix/bpo-22.d: Likewise.
* ld-mmix/greg-6.d: Likewise.
* ld-mmix/greg-7.d: Likewise.
* ld-mmix/loc4.d: Likewise.
* ld-mmix/local1.d: Likewise.
* ld-mmix/local3.d: Likewise.
* ld-mmix/local5.d: Likewise.
* ld-mmix/local7.d: Likewise.
* ld-mmix/loct-1.d: Likewise.
* ld-sh/sh64/abi32.xd: Likewise.
* ld-sh/sh64/abi64.xd: Likewise.
* ld-sh/sh64/cmpct1.xd: Likewise.
* ld-sh/sh64/crange1.rd: Likewise.
* ld-sh/sh64/crange2.rd: Likewise.
* ld-sh/sh64/crange3-cmpct.rd: Likewise.
* ld-sh/sh64/crange3-media.rd: Likewise.
* ld-sh/sh64/crange3.rd: Likewise.
* ld-sh/sh64/crangerel1.rd: Likewise.
* ld-sh/sh64/crangerel2.rd: Likewise.
* ld-sh/sh64/mix1.xd: Likewise.
* ld-sh/sh64/mix2.xd: Likewise.
* ld-sh/sh64/shdl32.xd: Likewise.
* ld-sh/sh64/shdl64.xd: Likewise.
I tried to build gdb on the AIX machine in the GCC compile farm
(gcc111), but it failed in a couple of spots because gdb uses "reg" as
a variable name and the AIX <curses.h> defines "reg" to "register".
I saw that we already had a workaround for this lurking in utils.c, so
I just moved that to gdb_curses.h.
This fixed the problem on AIX and still builds on x86-64 Fedora 18.
2013-10-29 Tom Tromey <tromey@redhat.com>
* utils.c (reg): Move undefinition...
* gdb_curses.h: ... here. Update comment to mention AIX.
These references to ChangeLog-mi are stale.
testsuite/gdb.mi/ChangeLog-mi doesn't exist anymore, since:
...
commit 2dd627049d
Author: Andrew Cagney <cagney@redhat.com>
Date: Sat Jun 23 21:47:09 2001 +0000
Rename gdb.mi/ChangeLog-mi to gdb.mi/ChangeLog. Update everything.
...
commit 48efe7049b
Author: Andrew Cagney <cagney@redhat.com>
Date: Mon Jan 12 15:16:44 2004 +0000
Eliminate the old mi/tui specific ChangeLog files as in ...
Added Files:
mi/ChangeLog-1999-2003 testsuite/gdb.mi/ChangeLog-1999-2003
tui/ChangeLog-1998-2003
Removed Files:
mi/ChangeLog testsuite/gdb.mi/ChangeLog tui/ChangeLog
Tested with 'make check RUNTESTFLAGS="--directory=gdb.mi"' on x86_64 Fedora 17.
gdb/testsuite/
2013-10-29 Pedro Alves <palves@redhat.com>
* gdb.mi/mi-console.c, gdb.mi/mi-stack.c: Remove local emacs
variable setting change-log-default-name to ChangeLog-mi.
https://sourceware.org/ml/gdb-patches/2013-08/msg00171.html
gdb/ChangeLog
* infcmd.c (default_print_one_register_info): Use val_print to
print all values even optimized out or unavailable ones. Don't
try to print a raw form of optimized out or unavailable values.
gdb/testsuite/ChangeLog
* gdb.trace/unavailable.exp (gdb_unavailable_registers_test):
Expect <unavailable> pattern.
This test exercises the commands 'add-symbol-file'
and 'remove-symbol-file'.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
gdb/testsuite
* gdb.base/sym-file-lib.c: New file.
* gdb.base/sym-file-loader.c: New file.
* gdb.base/sym-file-loader.h: New file.
* gdb.base/sym-file-main.c: New file.
* gdb.base/sym-file.exp: New file.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
gdb/testsuite
* lib/gdb.exp (is_elf_target): New function.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
Add the sections of the symbol files that are provided via
'add-symbol-file' to the set of current target sections.
User-added sections are removed upon notification of free_objfile
when their corresponding object file is deleted.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* exec.h (add_target_sections_of_objfile): New declaration.
* exec.c (add_target_sections_of_objfile): New function.
* symfile.c (add_symbol_file_command): Update current target sections.
(symfile_free_objfile): New function.
(_initialize_symfile): Register observer for free_objfile events.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* NEWS: Add description of the remove-symbol-file command.
gdb/doc
* gdb.texinfo (Commands to Specify Files): Add description
of the remove-symbol-file command.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
New command for removing symbol files added via
the add-symbol-file command.
2013-10-29 Nicolas Blanc <nicolas.blanc@intel.com>
* breakpoint.c (disable_breakpoints_in_freed_objfile): New function.
* objfiles.c (free_objfile): Notify free_objfile.
(is_addr_in_objfile): New function.
* objfiles.h (is_addr_in_objfile): New declaration.
* printcmd.c (clear_dangling_display_expressions): Act upon free_objfile
events instead of solib_unloaded events.
(_initialize_printcmd): Register observer for free_objfile instead
of solib_unloaded notifications.
* solib.c (remove_user_added_objfile): New function.
* symfile.c (remove_symbol_file_command): New command.
(_initialize_symfile): Add remove-symbol-file.
gdb/doc
* observer.texi: New free_objfile event.
Signed-off-by: Nicolas Blanc <nicolas.blanc@intel.com>
In registry.c:registry_clear_data, the registered data is iterated and
invoke each 'free' function with the data passed:
for (registration = data_registry->registrations, i = 0;
i < fields->num_data;
registration = registration->next, i++)
if (fields->data[i] != NULL && registration->data->free != NULL)
adaptor (registration->data->free, container, fields->data[i]);
we can see that data is passed to function 'free' and data is not NULL.
In each usage, we don't have to get the data again through key and
do NULL pointer checking. This patch is to simplify them.
gdb:
2013-10-29 Yao Qi <yao@codesourcery.com>
* auto-load.c (auto_load_pspace_data_cleanup): Get data from
parameter 'arg' instead of from program_space_data.
* objfiles.c (objfiles_pspace_data_cleanup): Likewise.
* solib-darwin.c (darwin_pspace_data_cleanup): Likewise.
* solib-dsbt.c (dsbt_pspace_data_cleanup): Likewise.
* solib-svr4.c (svr4_pspace_data_cleanup): Likewise.
* inflow.c (inflow_inferior_data_cleanup): Get data from
parameter 'arg' instead of inferior_data.
* registry.h: Add comments.
I was reading this, checking the the possible returns, and this
particular path confused a tiny little. Above we do:
if (!stopped_by_watchpoint)
{
...
return 0;
}
so any return after that always return true.
Tested on x86_64 Fedora 17.
gdb/
2013-10-28 Pedro Alves <palves@redhat.com>
* breakpoint.c (watchpoints_triggered)
<!target_stopped_data_address>: Hardcode return 1.
Now that all ecs->random_signal handing is always done before the
'process_event_stop_test' label, we can easily make that a real
function and actually give it a describing comment that somewhat makes
sense.
Reindenting the new function will be handled in a follow up patch.
2013-10-28 Pedro Alves <palves@redhat.com>
* infrun.c (process_event_stop_test): New function, factored out
from handle_inferior_event.
(handle_inferior_event): 'process_event_stop_test' is now a
function instead of a goto label -- adjust.
We only ever call "goto process_event_stop_test;" right after checking
that ecs->random_signal is clear. The code at the
process_event_stop_test label looks like:
/* For the program's own signals, act according to
the signal handling tables. */
if (ecs->random_signal)
{
... random signal handling ...
return;
}
else
{
... the stop tests that actually matter for the goto callers.
}
So this moves the label into the else branch. It'll make converting
process_event_stop_test into a function a bit clearer.
gdb/
2013-10-28 Pedro Alves <palves@redhat.com>
* infrun.c (handle_inferior_event): Move process_event_stop_test
goto label to the else branch of the ecs->random_signal check,
along with FRAME and GDBARCH re-fetching.
I recently added a new ecs->random_signal test after the "switch back to
stepped thread" code, and before the stepping tests. Looking at
making process_event_stop_test a proper function, I realized it'd be
better to keep ecs->random_signal related code together. To do that,
I needed to factor out the "switch back to stepped thread" code to a new
function, and call it in both the "random signal" and "not random
signal" paths.
gdb/
2013-10-28 Pedro Alves <palves@redhat.com>
* infrun.c (switch_back_to_stepped_thread): New function, factored
out from handle_inferior_event.
(handle_inferior_event): Adjust to call
switch_back_to_stepped_thread. Call it also at the tail of the
random signal handling, and return, instead of also handling
random signals just before the stepping tests.
'ecs' is always memset before being passed to handle_inferior_event.
The stop func is only filled in later in the flow. And since "Remove
dead sets/clears of ecs->random signal", nothing ever sets
ecs->random_signal before this part is reached either.
(Also tested with some added assertions in place.)
gdb/
2013-10-28 Pedro Alves <palves@redhat.com>
* infrun.c (clear_stop_func): Delete.
(handle_inferior_event): Don't call clear_stop_func and don't
clear 'ecs->random_signal'.
On 10/25/2013 11:34 AM, Joel Brobecker wrote:
> Also, as a followup, I think it would be beneficial if we renamed
> field "lang" in the varobj_root into "lang_ops". I think it's more
> descriptive, especially since "lang" is used elsewhere with different
> meanings (and types).
Here is the patch to rename 'lang' to 'lang_ops'. Committed as obvious.
gdb:
2013-10-27 Yao Qi <yao@codesourcery.com>
* varobj.c (struct varobj_root) <lang>: Rename to 'lang_ops'.
(varobj_create, varobj_get_path_expr): Update.
(varobj_value_has_mutated, varobj_update): Likewise.
(create_child_with_value, new_root_variable): Likewise.
(number_of_children, name_of_variable): Likewise.
(value_of_child, my_value_of_variable): Likewise.
(varobj_value_is_changeable_p): Likewise.
This is a follow-up series to move language stuff out of varobj.c.
This patch adds a new field la_varobj_ops in struct language_defn so
that each language has varobj-related options. Not every language
supports varobj, and the operations are identical to operations of c
languages.
'struct language_defn' is the ideal place to save all language-related
operations. After this patch, some cleanups can be done in patch 2/2,
which removes language-related stuff completely from varobj.c.
Regression tested on x86_64-linux.
gdb:
2013-10-25 Yao Qi <yao@codesourcery.com>
* language.h (struct lang_varobj_ops): Declare.
(struct language_defn) <la_varobj_ops>: New field.
* ada-lang.c: Include "varobj.h"
(defn ada_language_defn): Initialize field 'la_varobj_ops' by
ada_varobj_ops.
* c-lang.c: Include "varobj.h"
(c_language_defn): Initialize field 'la_varobj_ops' by
c_varobj_ops.
(cplus_language_defn): Initialize field 'la_varobj_ops' by
cplus_varobj_ops.
(asm_language_defn): Initialize field 'la_varobj_ops' by
default_varobj_ops.
(minimal_language_defn): Likewise.
* d-lang.c (d_language_defn): Likewise.
* f-lang.c (f_language_defn): Likewise.
* go-lang.c (go_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* opencl-lang.c (opencl_language_defn): Likewise.
* p-lang.c (pascal_language_defn): Likewise.
* language.c (unknown_language_defn): Likewise.
(auto_language_defn): Likewise.
(local_language_defn): Likewise.
* jv-lang.c (java_language_defn): Initialize field
'la_varobj_ops' by java_varobj_ops.
* varobj.c (varobj_create): Update.
* varobj.h (default_varobj_ops): Define macro.
Some remote stubs do not have a proper exit() function implementation.
gdb.base/bang.exp was failing on those targets due to timeout. With
this patch bang.exp uses already defined library procedures to handle
this situation gracefully without breaking native targets.
Tested with x86_64 (unix, native-gdbserver) and with arc-*-elf32.
gdb/testsuite/ChangeLog:
2013-10-25 Anton Kolesov <Anton.Kolesov@synopsys.com> (tiny change)
* gdb.base/bang.exp: Use gdb_continue_to_end to properly support
remote stubs where exit() behaviour is unreliable.
With:
struct static_struct { static int aaa; };
struct static_struct sss;
int main () { return 0; }
We get:
(gdb) p sss
$1 = {static aaa = <optimized out>}
(gdb) p sss.aaa
field aaa is nonexistent or has been optimized out
Note that the "field aaa ..." message is an error being thrown.
GDB is graceful everywhere else when printing optimized out values.
IOW it usually prints an <optimized out> value and puts that in the
value history. I see no reason for here to be different, more so that
when the print the whole "containing" object (well, it's a static
field, so it's not really a container), we already print <optimized
out>.
After the patch:
(gdb) p sss
$1 = {static aaa = <optimized out>}
(gdb) p sss.aaa
$2 = <optimized out>
The value_entirely_optimized_out checks are there to preserve
behavior. Without those, if the static field is a struct/union, GDB
would go and print its fields one by one (and print <optimized out>
for each).
Tested on x86_64 Fedora 17.
gdb/
2013-10-25 Pedro Alves <palves@redhat.com>
* cp-valprint.c (cp_print_value_fields): No longer handle a NULL
static field value.
(cp_print_static_field): If the value is entirely optimized out,
print <optimized out> here.
* jv-valprint.c (java_print_value_fields): No longer handle a NULL
static field value.
* p-valprint.c (pascal_object_print_static_field): If the value is
entirely optimized out, print <optimized out> here.
* valops.c (do_search_struct_field)
(value_struct_elt_for_reference): No longer handle a NULL static
field value.
* value.c (value_static_field): Return an optimized out value
instead of NULL.
gdb/testsuite/
2013-10-25 Pedro Alves <palves@redhat.com>
* gdb.cp/m-static.exp: Adjust expected output of printing a
nonexistent or optimized out static field. Also test printing the
the "container" object.
* dwarf2.c (lookup_address_in_line_info_table): Change return type
to be the range of addresses covered by the table.
(comp_unit_find_nearest_line): Likewise.
(find_line): Search all CUs. Select the one that matches and
covers the smallest address range.
* dwarf2.c (lookup_address_in_line_info_table): Change return type
to be the range of addresses covered by the table.
(comp_unit_find_nearest_line): Likewise.
(find_line): Search all CUs. Select the one that matches and
covers the smallest address range.
When I do 'si', I find many 'qXfer:traceframe-info:read' packets are sent,
which is not necessary. It slows down the single step.
(gdb) si
Sending packet: $qTStatus#49...Packet received: T0;tnotrun:0;tframes:0;tcreated:0;tfree:500000;tsize:500000;circular:0;disconn:0;starttime:0;stoptime:0;username:;notes::
Sending packet: $Z0,80483c7,1#b4...Packet received: OK
Sending packet: $Z0,4ce5b6b0,1#6e...Packet received: OK
Sending packet: $QPassSignals:e;10;14;17;1a;1b;1c;21;24;25;2c;4c;#5f...Packet received: OK
Sending packet: $vCont;s:p1b15.1b15;c#20...Packet received: T0505:44efffbf;04:44efffbf;08:d1830408;thread:p1b15.1b15;core:3;
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $mbfffef40,40#c0...Packet received: d183040878efffbf2e840408030000000000a040030000000500000070efffbf07000000010000004984040807000000030000000500000000000000b396e84c
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $z0,80483c7,1#d4...Packet received: OK
Sending packet: $z0,4ce5b6b0,1#8e...Packet received: OK
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
Sending packet: $qXfer:traceframe-info:read::0,fff#0b...Packet received: E01
This problem was introduced by this patch
(https://sourceware.org/ml/gdb-patches/2013-04/msg00000.html), in
which get_traceframe_number is not checked before calling
traceframe_available_memory. This patch moves the check to
remote_traceframe_info, say, if GDB doesn't have traceframe selected, GDB
doesn't need to send qXfer:traceframe-info:read packets.
With this patch applied, there is no qXfer:traceframe-info:read sent
out and single step is speed up a little bit.
Here is the experiment I did:
Num of single step Original Patched
single-step cpu_time 10000 8.08 7.57
single-step cpu_time 20000 16.23 14.23
single-step cpu_time 30000 24.19 21.59
single-step cpu_time 40000 32.49 28.0
single-step wall_time 10000 14.1974210739 13.2641420364
single-step wall_time 20000 28.5278921127 25.0541369915
single-step wall_time 30000 42.5864038467 38.0038759708
single-step wall_time 40000 57.2107698917 49.2350611687
single-step vmsize 10000 16128 16388
single-step vmsize 20000 16128 16388
single-step vmsize 30000 16260 16520
single-step vmsize 40000 16444 16704
The patch is tested on x86_64-linux.
gdb:
2013-10-24 Yao Qi <yao@codesourcery.com>
* remote.c (remote_traceframe_info): Return early if
traceframe is not selected.
I happen to see traceframe_fun and traceframe_sal are static variables,
which are not necessary to me. They are only used in set_traceframe_context,
and they are not stateful. This patch is to remove them.
gdb:
2013-10-24 Yao Qi <yao@codesourcery.com>
* tracepoint.c (traceframe_fun): Remove.
(traceframe_sal): Remove.
(set_traceframe_context): Add local variables.
* lib/gdb.exp (gdb_finish): Send a kill request to `gdbserver'
if in the persistent mode.
* gdb.trace/disconnected-tracing.exp: Reconnect before completion.
