This patch moves aarch64-insn.o to arch/aarch64-insn.o. Then, all
arch/*.c are built to arch/*.o, so we don't need a Makefile rule to build
*.o from arch/*.c. This patch removes it too.
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_64_TARGET_OBS): Replace aarch64-insn.o with
arch/aarch64-insn.o.
Remove one rule.
* configure.tgt: Replace aarch64-insn.o with arch/aarch64-insn.o.
It is tested by building GDB for some targets, arm-elf, arm-netbsd,
arm-linux, and aarch64-linux.
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Replace arm.o, arm-get-next-pcs.o,
and arm-linux.o with arch/arm.o, arch/arm-get-next-pcs.o and
arch/arm-linux.o respectively.
* configure.tgt: Likewise.
This patch changes the build that arch/i386.c is built to arch/i386.o,
instead of i386.o.
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Rename i386.o to arch/i386.o.
* configure.tgt (i386_tobjs): Replace i386.o with arch/i386.o.
Nowadays, there are much duplications in configure.tgt to update
gdb_target_obs, some cpu specific object files are added to gdb_target_obs
to some different target triplets of the same cpu. The same problem
exists for os specific object files too. It is fragile to update them,
and build with all targets enabled doesn't find the problem.
This patch splits the gdb_target_obs update to three steps, cpu steps, os
steps, and the rest.
I tested this patch by build gdb for each different target triplets
respectively,
aarch64-elf aarch64-rtems aarch64-freebsd aarch64-linux alpha-elf
alpha-linux alpha-netbsd alpha-openbsd arm-elf arm-wince-pe arm-linux
arm-netbsd arm-symbianelf avr cris-elf frv-elf h8300-elf i386-elf
i386-darwin i386-dicos i386-freebsd i386-netbsdelf i386-openbsd
i386-nto i386-solaris i386-linux i386-gnu i386-cygwin i386-mingw32
i386-go32 ia64-linux-gnu ia64-vms lm32-elf m32c-elf m32r-elf m32r-linux
m68hc11-elf m68k-elf m68k-linux m68k-netbsd m68k-openbsd m88k-openbsd
mep-elf microblaze-xilinx-elf microblaze-linux-gnu mips-elf moxie-elf
ms1-elf nios2-elf nios2-linux-gnu hppa-elf hppa-linux hppa-netbsd
hppa-openbsd powerpc-eabi powerpc-freebsd powerpc-netbsd powerpc-openbsd
powerpc-linux powerpc-lynx178 rl78-elf rx-elf s390-linux-gnu score-elf
sh-elf sh-linux sh-openbsd sh64-elf sh64-linux sh64-openbsd sparc64-linux
sparc-linux sparc-freebsd sparc64-freebsd sparc-netbsd sparc64-netbsd
sparc-openbsd sparc64-openbsd spu-elf tic6x-elf tic6x-uclinux v850-elf
vax-netbsd vax-openbsd x86_64-linux-gnu x86_64-darwin x86_64-dicos
x86_64-elf x86_64-freebsd x86_64-mingw32 x86_64-netbsd x86_64-openbsd
x86_64-rtems xstormy16-elf xtensa-elf xtensa-linux
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* configure.tgt (i386_tobjs): New variable.
(amd64_tobjs): New variable.
Set $cpu_obs and $os_obs.
Nowadays, GDB build tree is almost flat, but source tree isn't. We
have arch/ nat/ target/ common/ cli/ mi/ tui/ python/ guile/ directories.
We need to some rules in Makefile for source files in different source
directories, like,
# Rules for compiling .c files in the various source subdirectories.
%.o: ${srcdir}/arch/%.c
$(COMPILE) $<
$(POSTCOMPILE)
%.o: ${srcdir}/nat/%.c
$(COMPILE) $<
$(POSTCOMPILE)
so we should take care of some special case that files' base name is the
same, like,
# Specify an explicit rule for gdb/common/agent.c, to avoid a clash with the
# object file generate by gdb/agent.c.
common-agent.o: $(srcdir)/common/agent.c
$(COMPILE) $(srcdir)/common/agent.c
$(POSTCOMPILE)
As we add more and more files in different directories, it becomes tricky
to name files, because we need take this into account.
This patch takes the first step toward "Replicate src dir in build dir",
that is, we create arch/ directory in buildtree, and put amd64.o there
as an example. Dependency tracking is updated for files with directory
name. Currently, when we build amd64.o,
"-c -o amd64.o -MT amd64.o -MMD -MP -MF .deps/amd64.Tpo"
with this patch applied, it becomes,
"-c -o arch/amd64.o -MT arch/amd64.o -MMD -MP -MF arch/.deps/amd64.o.Tpo"
"make clean" removes the object files, and "make distclean" removes .deps
additionally. configure file create .deps directory in each of
CONFIG_SRC_SUBDIR, and pass it to Makefile.in, so that "make clean" and
"make distclean" can remove stuffs there.
If people agree with this change, I'll add more directories to
CONFIG_SRC_SUBDIR.
gdb:
2017-10-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (CONFIG_SRC_SUBDIR): New.
(ALL_64_TARGET_OBS): Replace amd64.o with arch/amd64.o.
(clean): Remove object files and dependency files.
(distclean): Remove the directory.
* configure.ac: Invoke AC_CONFIG_COMMANDS.
* configure: Re-generated.
* configure.tgt: Replace amd64.o with arch/amd64.o.
Given that GCC has obsoleted/removed support for Solaris 9 in GCC 4.9/5 in 2013:
https://gcc.gnu.org/gcc-4.9/changes.htmlhttps://gcc.gnu.org/ml/gcc-patches/2013-05/msg00728.html
and the last gdb version that can be compiled with gcc 4.9 is 7.12.1 only when
configured with --disable-build-with-cxx, it's time to obsolete/remove support
for Solaris < 10.
This patch does this, simplifying configure.nat along the way (only a single
sol2 configuration with variants for i386 and sparc).
Some configure checks for older Solaris versions can go, too, and the check
for libthread_db.so.1 removed:
* Since Solaris 10, dlopen has moved to libc and libdl.so is just a
filter on ld.so.1, so no need to check.
* $RDYNAMIC is already handled above (and is a no-op with Solaris ld
anyway).
Both proc-service.c and sol-thread.c lose support for (Solaris-only)
PROC_SERVICE_IS_OLD.
The attached revised patch has been tested on sparcv9-sun-solaris2.10,
sparcv9-sun-solaris2.11.4, amd64-pc-solaris2.10, amd64-pc-solaris2.11.4,
and x86_64-pc-linux-gnu.
I've also started an i386-pc-solaris2.9 build to check that it really
stops as expected.
PR gdb/22185
* configure.host <*-*-solaris2.[01], *-*-solaris2.[2-9]*>: Mark as
obsolete.
Use gdb_host sol2 for i[34567]86-*-solaris2*, x86_64-*-solaris2*.
Remove i386sol2 support.
* configure.nat <i386sol2>: Remove.
<sol2-64>: Fold into ...
<sol2>: ... this.
Move common settings to default section.
Add sol-thread.o.
* configure.tgt <i[34567]86-*-solaris2.1[0-9]*,
x86_64-*-solaris2.1[0-9]*>: Rename to ...
<i[34567]86-*-solaris2*, x86_64-*-solaris2*>: ... this.
<i[34567]86-*-solaris*>: Remove.
<sparc-*-solaris2.[0-6], sparc-*-solaris2.[0-6].*>: Remove.
* configure.ac: Remove wctype in libw check.
(_MSE_INT_H): Don't define on Solaris 7-9.
<solaris*>: Remove libthread_db.so.1 check.
* configure: Regenerate.
* config.in: Regenerate.
* proc-service.c: Remove PROC_SERVICE_IS_OLD handling.
(gdb_ps_prochandle_t, gdb_ps_read_buf_t, gdb_ps_write_buf_t)
(gdb_ps_size_t): Remove.
Use base types in users.
* sol-thread.c: Likewise, also for gdb_ps_addr_t.
* NEWS (Changes since GDB 8.0): Document Solaris 2.0-9 removal.
I happen to see that fbsd-tdep.o is missing for target aarch64-freebsd,
and it causes the build failure,
aarch64-fbsd-tdep.o: In function `aarch64_fbsd_init_abi(gdbarch_info, gdbarch*)':
binutils-gdb/gdb/aarch64-fbsd-tdep.c:186: undefined reference to `fbsd_init_abi(gdbarch_info, gdbarch*)'
binutils-gdb/gdb/aarch64-fbsd-tdep.c:189: undefined reference to `svr4_lp64_fetch_link_map_offsets()'
binutils-gdb/gdb/aarch64-fbsd-tdep.c:189: undefined reference to `set_solib_svr4_fetch_link_map_offsets(gdbarch*, link_map_offsets* (*)())'
This patch fixed it.
gdb:
2017-09-21 Yao Qi <yao.qi@linaro.org>
* configure.tgt (aarch64*-*-freebsd*): Add fbsd-tdep.o solib-svr4.o
to gdb_target_obs.
Christophe Lyon told me that GDB build failed on i386-linux with
--enable-64-bit-bfd=yes, so I audit the gdb/configure.tgt again. I
find that i386-darwin has the same issue too. Additionally, GDB
for solaris target fails to build too. This patch fixes all of them.
gdb:
2017-09-15 Yao Qi <yao.qi@linaro.org>
* configure.tgt (i[34567]86-*-darwin*): Append amd64.o to
gdb_target_obs.
(i[34567]86-*-solaris2.1[0-9]* | x86_64-*-solaris2.1[0-9]*):
Likewise.
(i[34567]86-*-linux*): Likewise.
Support for collecting and supplying general purpose and floating point
register sets is provided along with signal frame unwinding.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS): Add aarch64-fbsd-tdep.o.
(ALLDEPFILES): Add aarch64-fbsd-tdep.c.
* NEWS: Mention new FreeBSD/aarch64 target.
* configure.tgt: Add aarch64*-*-freebsd*.
* aarch64-fbsd-tdep.c: New file.
* aarch64-fbsd-tdep.h: New file.
This patch fixes the build failure caused by 22916b0
(Convert the rest x86 target descriptions).
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* configure.tgt (gdb_target_obs): Add i386.o for x86_64-*
targets.
This patch changes amd64-linux target descriptions so that they can be
dynamically generated in both GDB and GDBserver.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (arch-amd64.o): New rule.
* configure.srv: Append arch-amd64.o.
* linux-amd64-ipa.c: Include common/x86-xstate.h.
(get_ipa_tdesc): Call amd64_linux_read_description.
(initialize_low_tracepoint): Don't call init_registers_x32_XXX
and init_registers_amd64_XXX.
* linux-x86-low.c (x86_linux_read_description): Call
amd64_linux_read_description.
(x86_get_ipa_tdesc_idx): Call amd64_get_ipa_tdesc_idx.
(initialize_low_arch): Don't call init_registers_x32_XXX and
init_registers_amd64_XXX.
* linux-x86-tdesc-selftest.c: Declare init_registers_amd64_XXX
and tdesc_amd64_XXX.
[__x86_64__] (amd64_tdesc_test): New function.
(initialize_low_tdesc) [__x86_64__]: Call init_registers_x32_XXX
and init_registers_amd64_XXX.
* linux-x86-tdesc.c: Include arch/amd64.h.
(xcr0_to_tdesc_idx): New function.
(i386_linux_read_description): New function.
(amd64_get_ipa_tdesc_idx): New function.
* linux-x86-tdesc.h (amd64_get_ipa_tdesc_idx): Declare.
(amd64_get_ipa_tdesc): Declare.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* amd64-linux-tdep.c: Include arch/amd64.h. Don't include
features/i386/*.c.
(amd64_linux_read_description): Call
amd64_create_target_description.
* arch/amd64.c: New file.
* arch/amd64.h: New file.
* configure.tgt (x86_64-*-linux*): Append amd64.o.
* Makefile.in (ALL_64_TARGET_OBS): Append amd64.o.
The code on creating i386-linux target descriptions are quite similar
between GDB and GDBserver, so this patch moves them into a shared file
arch/i386.c. I didn't name it as i386-linux.c, because I want to reuse it
to create other i386 non-linux target descriptions later.
gdb:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (ALL_TARGET_OBS): Add i386.o.
(SFILES): Add arch/i386.c.
(HFILES_NO_SRCDIR): Add arch/i386.h.
* arch/i386.c: New file.
* arch/i386.h: New file.
* arch/tdesc.h (allocate_target_description): Declare.
(set_tdesc_architecture): Declare.
(set_tdesc_osabi): Declare.
* configure.tgt (i[34567]86-*-linux*): Add i386.o.
* i386-linux-tdep.c: Don't include ../features/i386/32bit-XXX.c.
include arch/i386.h.
(i386_linux_read_description): Remove code and call
i386_create_target_description.
(set_tdesc_architecture): New function.
(set_tdesc_osabi): New function.
* target-descriptions.h (allocate_target_description): Remove.
gdb/gdbserver:
2017-09-05 Yao Qi <yao.qi@linaro.org>
* Makefile.in (arch-i386.o): New rule.
* configure.srv (i[34567]86-*-linux*): Add arch-i386.o.
(x86_64-*-linux*): Likewise.
* linux-x86-tdesc.c: Don't include ../features/i386/32bit-XXX.c,
include arch/i386.h.
(i386_linux_read_description): Remove code and call
i386_create_target_description.
* tdesc.c (allocate_target_description): New function.
* tdesc.h (set_tdesc_architecture): Remove declaration.
(set_tdesc_osabi): Likewise.
I posit that this makes them easier to find.
The other day while working on the wchar_t patch, I had a bit of
trouble finding the DJGPP/go32 tdep bits. My initial reaction was
looking for a go32-specific tdep file, but there's none.
Confirmed that a --host=i586-pc-msdosdjgpp GDB still builds
successfully and includes the i386-go32-tdep.o object.
Confirmed that an --enable-targets=all build of GDB on x86-64
GNU/Linux includes the DJGPP/go32 bits too.
gdb/ChangeLog:
2017-04-12 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Add i386-go32-tdep.o.
* configure.tgt: Handle i[34567]86-*-go32* and
i[34567]86-*-msdosdjgpp*.
* i386-tdep.c (i386_svr4_reg_to_regnum):
Make extern.
(i386_go32_init_abi, i386_coff_osabi_sniffer): Moved to
i386-go32-tdep.c.
(_initialize_i386_tdep): DJGPP bits moved to i386-go32-tdep.c.
* i386-go32-tdep.c: New file.
* i386-tdep.h (tdesc_i386_mmx, i386_svr4_reg_to_regnum): New
declarations.
The bsd-uthread target supports an old thread library ("libc_r") that
was last included in FreeBSD release 6.4 released in 2008. However,
this library has not been used as the default library since FreeBSD
5.0 (2003) and 4.11 (2005). Thread support for modern FreeBSD binaries
is provided via "normal" LWP support in core files and the native
FreeBSD target.
gdb/ChangeLog:
* amd64-fbsd-tdep.c: Remove "bsd-uthread.h" include.
(amd64fbsd_jmp_buf_reg_offset): Remove.
(amd64fbsd_supply_uthread): Remove function.
(amd64fbsd_collect_uthread): Remove function.
(amd64fbsd_init_abi): Don't set bsd-uthread callbacks.
* configure.tgt (i[34567]86-*-freebsd*): Remove bsd-uthread.o.
(x86_64-*-freebsd*): Remove bsd-uthread.o.
(fbsd-nat.c): Update comment.
* i386-fbsd-tdep.c: Remove "bsd-uthread.h" include.
(i386fbsd_jmp_buf_reg_offset): Remove.
(i386fbsd_supply_uthread): Remove function.
(i386fbsd_collect_uthread): Remove function.
(i386fbsd_init_abi): Don't set bsd-uthread callbacks.
FreeBSD last shipped a release for Alpha (6.3) in 2008.
This also removes support for GNU/kFreeBSD on Alpha.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-fbsd-tdep.o.
(ALLDEPFILES): Remove alpha-fbsd-tdep.c
* NEWS: Mention that support for FreeBSD/alpha was removed.
* alpha-fbsd-tdep.c: Delete file.
* config/alpha/fbsd.mh: Delete file.
* configure.host: Delete alpha*-*-freebsd* and
alpha*-*-kfreebsd*-gnu.
* configure.tgt: Delete alpha*-*-freebsd* and
alpha*-*-kfreebsd*-gnu.
This has been tested for the n64 and o32 ABIs. Signal frame unwinders for
both ABIs are provided. FreeBSD/mips requires custom linkmap offsets since
it contains an additional l_off member in 'struct link_map' that other
FreeBSD platforms do not have. Support for collecting and supplying
general purpose and floating point register sets are provided. Common
routines for working with native format register sets are exported for
use by the native target.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add mips-fbsd-tdep.o.
(ALLDEPFILES): Add mips-fbsd-tdep.c.
* NEWS: Mention new FreeBSD/mips target.
* configure.tgt: Add mips*-*-freebsd*.
* mips-fbsd-tdep.c: New file.
* mips-fbsd-tdep.h: New file.
gdb/doc/ChangeLog:
* gdb.texinfo (Contributors): Add SRI International and University
of Cambridge for FreeBSD/mips.
VxWorks support was removed in 2004.
commit e84ecc995d
Author: Andrew Cagney <cagney@redhat.com>
Date: Sat Nov 13 23:10:02 2004 +0000
2004-11-13 Andrew Cagney <cagney@gnu.org>
* configure.tgt: Delete i[34567]86-*-vxworks*, m68*-netx-*,
m68*-*-vxworks*, mips*-*-vxworks*, powerpc-*-vxworks*, and
sparc-*-vxworks*.
* NEWS: Mention that vxworks was deleted.
This patch adds *-*-vxworks* in a list of targets GDB doesn't
support.
gdb:
2016-10-20 Yao Qi <yao.qi@linaro.org>
* configure.tgt: Don't configure if target is *-*-vxworks*.
Add support for Newlib as an OS/ABI. The only thing that is specific to it
relatively to "generic" baremetal target is location of PC register in jump
buffer for longjump support.
Sniffer uses .ivt section to decide if ELF file is for ARC Newlib or not.
gdb/ChangeLog:
* arc-newlib-tdep.c: New file.
* configure.tgt: Add newlib support for ARC.
ARC is a family of licensable processors developed by Synopsys.
This is an initial patch that doesn't yet support some of the features, that
are already available in Synopsys' fork of GDB, namely:
* longjmp support
* signal frame handling
* prologue analysis
* Linux targets support
* native Linux support
ARC cores are configurable and extensible, which means from debugger
perspective that some registers and debug capabilities are optional, therefore
it is up to the GDB stub to determine exact list of register available on
target and supply it to GDB via XML target descriptions. List of registers
that is known to GDB and is required is intentionally kept small to simplify
requirements to GDB stub and implementation of a GDB client.
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Add arc-tdep.o.
(HFILES_NO_SRCDIR): Add arc-tdep.h.
(ALLDEPFILES): Add arc-tdep.c.
* NEWS: Mention new ARC port.
* configure.tgt: Add ARC.
* arc-tdep.c: New file.
* arc-tdep.h: New file.
* features/Makefile (XMLTOC): Add arc-v2.xml and arc-arcompact.xml.
* features/arc-v2.xml: New file.
* features/arc-v2.c: New file (generated).
* features/arc-arcompact.xml: New file.
* features/arc-arcompact.c: New file (generated).
gdb/doc/ChangeLog:
* gdb.texinfo (Embedded Processors): Document ARC.
(Synopsys ARC): New section.
(Standard Target Features): Document ARC features.
(ARC Features): New section.
gdb/testsuite/ChangeLog:
* gdb.xml/tdesc-regs.exp: set core-regs for arc*-*-elf32.
This removes support for:
| target | source |
|-------------------+-----------------------|
| target m32rsdi | gdb/remote-m32r-sdi.c |
| target mips | gdb/remote-mips.c |
| target pmon | gdb/remote-mips.c |
| target ddb | gdb/remote-mips.c |
| target rockhopper | gdb/remote-mips.c |
| target lsi | gdb/remote-mips.c |
That is:
- Remote M32R debugging over SDI.
- Debugging boards using the MIPS remote debugging protocol
over a serial line, PMON, and a few variants.
These are the last non-"target remote" remote targets in the tree, if
you don't count "target sim".
Refs:
https://sourceware.org/ml/gdb/2016-03/msg00004.htmlhttps://sourceware.org/ml/gdb-patches/2016-03/msg00580.html
gdb/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* NEWS: Mention that support for "target m32rsdi", "target mips",
"target pmon", "target ddb", "target rockhopper", and "target lsi"
was removed.
* Makefile.in (ALL_TARGET_OBS): Remove remote-m32r-sdi.o and
remote-mips.o.
(ALLDEPFILES): Remove remote-m32r-sdi.c and remote-mips.c.
* configure.tgt: Remove all references to remote-m32r-sdi.o and
remote-mips.o.
* mips-tdep.c (deprecated_mips_set_processor_regs_hack): Delete
function.
* mips-tdep.h (deprecated_mips_set_processor_regs_hack): Delete
declaration.
* remote-m32r-sdi.c, remote-mips.c: Delete files.
* symfile.c (generic_load, generic_load): Remove comments.
gdb/doc/ChangeLog:
2016-03-31 Pedro Alves <palves@redhat.com>
* gdb.texinfo (M32R/SDI): Delete node.
(MIPS Embedded): Remove references to the MIPS remote debugging
protocol, PMON and variants, and the associated commands.
There has never been a GNU/sim port for the S+Core architecture.
It was added to support private code that has (and most likely
never will) see the light of day [1]. Punt this as we don't do
this for other people. If you want to maintain a proprietary
internal build, then that's not really our problem.
[1] https://sourceware.org/ml/gdb-patches/2009-03/msg00390.html
This patch teaches GDBServer how to software single step on ARM
linux by sharing code with GDB.
The arm_get_next_pcs function in GDB is now shared with GDBServer. So
that GDBServer can use the function to return the possible addresses of
the next PC.
A proper shared context was also needed so that we could share the code,
this context is described in the arm_get_next_pcs structure.
Testing :
No regressions, tested on ubuntu 14.04 ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in (ALL_TARGET_OBS): Append arm-get-next-pcs.o,
arm-linux.o.
(ALLDEPFILES): Append arm-get-next-pcs.c, arm-linux.c
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* arch/arm-get-next-pcs.c: New file.
* arch/arm-get-next-pcs.h: New file.
* arch/arm-linux.h: New file.
* arch/arm-linux.c: New file.
* arm.c: Include common-regcache.c.
(thumb_advance_itstate): Moved from arm-tdep.c.
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm.h (submask): Move macro from arm-tdep.h
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_advance_itstate): Moved declaration from arm-tdep.h
(arm_instruction_changes_pc): Likewise.
(thumb_instruction_changes_pc): Likewise.
(thumb2_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
* arm-linux-tdep.c: Include arch/arm.h, arch/arm-get-next-pcs.h
arch/arm-linux.h.
(arm_linux_get_next_pcs_ops): New struct.
(ARM_SIGCONTEXT_R0, ARM_UCONTEXT_SIGCONTEXT,
ARM_OLD_RT_SIGFRAME_SIGINFO, ARM_OLD_RT_SIGFRAME_UCONTEXT,
ARM_NEW_RT_SIGFRAME_UCONTEXT, ARM_NEW_SIGFRAME_MAGIC): Move stack
layout defines to arch/arm-linux.h.
(arm_linux_sigreturn_next_pc_offset): Move to arch/arm-linux.c.
(arm_linux_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.c: Include arch/arm-get-next-pcs.h.
(arm_get_next_pcs_ops): New struct.
(submask): Move macro to arm.h.
(bit): Likewise.
(bits): Likewise.
(sbits): Likewise.
(BranchDest): Likewise.
(thumb_instruction_changes_pc): Move to arm.c
(thumb2_instruction_changes_pc): Likewise.
(arm_instruction_changes_pc): Likewise.
(shifted_reg_val): Likewise.
(thumb_advance_itstate): Likewise.
(thumb_get_next_pc_raw): Move to arm-get-next-pcs.c.
(arm_get_next_pc_raw): Likewise.
(arm_get_next_pc): Likewise.
(thumb_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence_raw): Likewise.
(arm_deal_with_atomic_sequence): Likewise.
(arm_get_next_pcs_read_memory_unsigned_integer): New function.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_software_single_step): Adjust for arm_get_next_pcs
implementation.
* arm-tdep.h: (arm_get_next_pc): Remove declaration.
(arm_get_next_pcs_read_memory_unsigned_integer):
New declaration.
(arm_get_next_pcs_addr_bits_remove): Likewise.
(arm_get_next_pcs_syscall_next_pc): Likewise.
(arm_get_next_pcs_is_thumb): Likewise.
(arm_deal_with_atomic_sequence: Remove declaration.
* common/gdb_vecs.h: Add CORE_ADDR vector definition.
* configure.tgt (aarch64*-*-linux): Add arm-get-next-pcs.o,
arm-linux.o.
(arm*-wince-pe): Add arm-get-next-pcs.o.
(arm*-*-linux*): Add arm-get-next-pcs.o, arm-linux.o,
arm-get-next-pcs.o
(arm*-*-netbsd*,arm*-*-knetbsd*-gnu): Add arm-get-next-pcs.o.
(arm*-*-openbsd*): Likewise.
(arm*-*-symbianelf*): Likewise.
(arm*-*-*): Likewise.
* symtab.h: Move CORE_ADDR vector definition to gdb_vecs.h.
gdb/gdbserver/ChangeLog:
* Makefile.in (SFILES): Append arch/arm-linux.c,
arch/arm-get-next-pcs.c.
(arm-linux.o): New rule.
(arm-get-next-pcs.o): New rule.
* configure.srv (arm*-*-linux*): Add arm-get-next-pcs.o,
arm-linux.o.
* linux-aarch32-low.c (arm_abi_breakpoint): Remove macro. Moved
to linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): Make non-static.
* linux-aarch32-low.h (arm_abi_breakpoint): New macro. Moved
from linux-aarch32-low.c.
(arm_eabi_breakpoint, arm_breakpoint): Likewise.
(arm_breakpoint_len, thumb_breakpoint): Likewise.
(thumb_breakpoint_len, thumb2_breakpoint): Likewise.
(thumb2_breakpoint_len): Likewise.
(arm_is_thumb_mode): New declaration.
* linux-arm-low.c: Include arch/arm-linux.h
aarch/arm-get-next-pcs.h, sys/syscall.h.
(get_next_pcs_ops): New struct.
(get_next_pcs_addr_bits_remove): New function.
(get_next_pcs_is_thumb): New function.
(get_next_pcs_read_memory_unsigned_integer): Likewise.
(arm_sigreturn_next_pc): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
(arm_gdbserver_get_next_pcs): Likewise.
(struct linux_target_ops) <arm_gdbserver_get_next_pcs>:
Initialize.
* linux-low.h: Move CORE_ADDR vector definition to gdb_vecs.h.
* server.h: Include gdb_vecs.h.
gdb/ChangeLog:
PR/18376
* gdb/configure.tgt: Add linux-record.o to s390*-linux.
* gdb/s390-linux-tdep.c: #include "linux-record.h", "record-full.h"
(s390_linux_record_tdep): New static global variable.
(s390x_linux_record_tdep): New static global variable.
(s390_all_but_pc_registers_record): New function.
(s390_canonicalize_syscall): New function.
(s390_linux_syscall_record): New function.
(s390_linux_record_signal): New function.
(s390_record_calc_disp_common): New function.
(s390_record_calc_disp): New function.
(s390_record_calc_disp_vsce): New function.
(s390_record_calc_rl): New function.
(s390_record_gpr_g): New function.
(s390_record_gpr_h): New function.
(s390_record_vr): New function.
(s390_process_record): New function.
(s390_init_linux_record_tdep): New function.
(s390_gdbarch_init): Fill record function slots.
gdb/testsuite/ChangeLog:
* gdb.reverse/s390-mvcle.c: New test.
* gdb.reverse/s390-mvcle.exp: New file.
* lib/gdb.exp: Enable reverse tests on s390*-linux.
ARM can have multiple breakpoint types based on the instruction set
it's currently in: arm, thumb or thumb2.
GDBServer needs to know what breakpoint is to be inserted at location
when inserting a breakpoint.
This is handled by the breakpoint_kind_from_pc and sw_breakpoint_from_kind
target ops introduced in a previous patch, this patch adds the
arm_breakpoint_kind_from_pc and arm_sw_breakpoint_from_kind implementation so
that the proper breakpoint type is returned based on the pc.
Also in order to share some code with GDB a new file called arm.c have been
introduced in arch/.
While this file does not contain much yet future patches will add more
to it thus the inclusion at this stage.
No regressions on Ubuntu 14.04 on ARMv7 and x86.
With gdbserver-{native,extended} / { -marm -mthumb }
gdb/ChangeLog:
* Makefile.in: Add arm.c/o.
* arch/arm.c: New file.
* arch/arm.h: (IS_THUMB_ADDR): Move macro from arm-tdep.c.
(MAKE_THUMB_ADDR): Likewise.
(UNMAKE_THUMB_ADDR): Likewise.
* arm-tdep.c (int thumb_insn_size): Move to arm.c.
(IS_THUMB_ADDR): Move to arm.h.
(MAKE_THUMB_ADDR): Likewise.
(UNMAKE_THUMB_ADDR): Likewise.
* configure.tgt: Add arm.o to all ARM configs.
gdb/gdbserver/ChangeLog:
* Makefile.in: Add arm.c/o.
* configure.srv: Likewise.
* linux-arm-low.c (arm_breakpoint_kinds): New enum.
(arm_breakpoint_kind_from_pc): New function.
(arm_sw_breakpoint_from_kind): Return proper kind.
(struct linux_target_ops) <breakpoint_kind_from_pc>: Initialize.
This patch moves the following functions into the arch/ common
directory, in new files arch/aarch64-insn.{h,c}. They are prefixed with
'aarch64_':
- aarch64_decode_adrp
- aarch64_decode_b
- aarch64_decode_cb
- aarch64_decode_tb
We will need them to implement fast tracepoints in GDBserver.
For consistency, this patch also adds the 'aarch64_' prefix to static
decoding functions that do not need to be shared right now.
V2:
make sure the formatting issues propagated
fix `gdbserver/configure.srv'.
gdb/ChangeLog:
* Makefile.in (ALL_64_TARGET_OBS): Add aarch64-insn.o.
(HFILES_NO_SRCDIR): Add arch/aarch64-insn.h.
(aarch64-insn.o): New rule.
* configure.tgt (aarch64*-*-elf): Add aarch64-insn.o.
(aarch64*-*-linux*): Likewise.
* arch/aarch64-insn.c: New file.
* arch/aarch64-insn.h: New file.
* aarch64-tdep.c: Include arch/aarch64-insn.h.
(aarch64_debug): Move to arch/aarch64-insn.c. Declare in
arch/aarch64-insn.h.
(decode_add_sub_imm): Rename to ...
(aarch64_decode_add_sub_imm): ... this.
(decode_adrp): Rename to ...
(aarch64_decode_adrp): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_b): Rename to ...
(aarch64_decode_b): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_bcond): Rename to ...
(aarch64_decode_bcond): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_br): Rename to ...
(aarch64_decode_br): ... this.
(decode_cb): Rename to ...
(aarch64_decode_cb): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(decode_eret): Rename to ...
(aarch64_decode_eret): ... this.
(decode_movz): Rename to ...
(aarch64_decode_movz): ... this.
(decode_orr_shifted_register_x): Rename to ...
(aarch64_decode_orr_shifted_register_x): ... this.
(decode_ret): Rename to ...
(aarch64_decode_ret): ... this.
(decode_stp_offset): Rename to ...
(aarch64_decode_stp_offset): ... this.
(decode_stp_offset_wb): Rename to ...
(aarch64_decode_stp_offset_wb): ... this.
(decode_stur): Rename to ...
(aarch64_decode_stur): ... this.
(decode_tb): Rename to ...
(aarch64_decode_tb): ... this. Move to arch/aarch64-insn.c.
Declare in arch/aarch64-insn.h.
(aarch64_analyze_prologue): Adjust calls to renamed functions.
gdb/gdbserver/ChangeLog:
* Makefile.in (aarch64-insn.o): New rule.
* configure.srv (aarch64*-*-linux*): Add aarch64-insn.o.
Ref: https://sourceware.org/ml/gdb/2015-07/msg00011.html
All of these targets use gdb/monitor.c, which has bit rotted
years ago (I'd guess around ~6), and nobody seems to
have noticed:
| target | source |
|----------------+----------------------|
| target dbug | gdb/dbug-rom.c |
| target picobug | gdb/microblaze-rom.c |
| target dink32 | gdb/dink32-rom.c |
| target m32r | gdb/m32r-rom.c |
| target mon2000 | gdb/m32r-rom.c |
| target ppcbug | gdb/ppcbug-rom.c |
This deletes them, along with finally removing monitor.c.
A manual update will be done separately.
gdb/ChangeLog:
2015-08-24 Pedro Alves <palves@redhat.com>
* NEWS: Mention removed support for the various ROM monitors.
* Makefile.in (ALL_TARGET_OBS): Remove dbug-rom.o, dink32-rom.o,
ppcbug-rom.o, m32r-rom.o, dsrec.o and monitor.o from gdb_target_obs.
* configure.tgt (h8300-*-*): Remove monitor.o and m32r-rom.o from
gdb_target_obs.
(m68*-*-*): Remove monitor.o dbug-rom.o and dsrec.o from
gdb_target_obs.
(microblaze*-linux-*): Remove microblaze-rom.o, monitor.o and
dsrec.o from gdb_target_obs.
(microblaze*-*-*): Remove microblaze-rom.o, monitor.o and dsrec.o
from gdb_target_obs.
(powerpc-*-lynx*178): Remove monitor.o and dsrec.o from
gdb_target_obs.
(powerpc*-*-*): Remove monitor.o, dsrec.o, ppcbug-rom.o and
dink32-rom.o from gdb_target_obs.
(sh*-*-linux*): Remove monitor.o and dsrec.o from gdb_target_obs.
(sh*): Remove monitor.o and dsrec.o from gdb_target_obs.
* dbug-rom.c, dink32-rom.c, dsrec.c, m32r-rom.c, microblaze-rom.c,
monitor.c, monitor.h, ppcbug-rom.c, srec.h: Delete files.
This patch is to let aarch64 GDB debug 32-bit arm program natively. In
each function for fetching and storing registers, GDB will check
gdbarch_bfd_arch_info (gdbarch)->bits_per_word, if it is 32, call
the corresponding aarch32 functions in aarch32-linux-nat.c, otherwise
fall back to aarch64 code to fetch and store registers.
aarch64_linux_read_description has to return the right target description,
but we don't have gdbarch available there, so GDB fetches auxv and gets
AT_PHENT, in order to determine whether the target is 32-bit or 64-bit.
I learned this trick from solib-svr4.c.
gdb:
2015-07-07 Yao Qi <yao.qi@linaro.org>
* aarch32-linux-nat.h (VFP_REGS_SIZE): New macro, moved from
arm-linux-nat.c.
* aarch64-linux-nat.c: Include aarch32-linux-nat.h and
elf/external.h.
(fetch_gregs_from_thread): Call aarch32_gp_regcache_supply
if target is 32-bit.
(store_gregs_to_thread): Call aarch32_gp_regcache_collect
if target is 32-bit.
(fetch_fpregs_from_thread): Call aarch32_vfp_regcache_supply
if target is 32-bit.
(store_fpregs_to_thread): Call aarch32_vfp_regcache_collect
if target is 32-bit.
(tdesc_arm_with_vfpv3, tdesc_arm_with_neon): Declare.
(aarch64_linux_read_description): Return the right target
description.
* arm-linux-nat.c (VFP_REGS_SIZE): Moved to aarch32-linux-nat.h.
* config/aarch64/linux.mh (NATDEPFILES): Add aarch32-linux-nat.o.
* configure.tgt (aarch64*-*-linux*): Add arm-tdep.o and
arm-linux-tdep.o
This patch adds the support of aarch64-linux process record and reverse
debugging. The implementation is similar to ARM's counterpart.
2015-05-26 Omair Javaid <omair.javaid@linaro.org>
Yao Qi <yao.qi@linaro.org>
* aarch64-linux-tdep.c: Include linux-record.h and
record-full.h.
(struct linux_record_tdep aarch64_linux_record_tdep): Declare.
(aarch64_syscall): New enum.
(aarch64_canonicalize_syscall): New function.
(aarch64_all_but_pc_registers_record): New function.
(aarch64_linux_syscall_record): New function.
(aarch64_linux_init_abi): Install AArch64 process record
handler. Update to handle syscall recording.
* aarch64-tdep.c: Include record.h and record-full.h.
(submask, bit, bits, REG_ALLOC, MEM_ALLOC): New macros.
(struct aarch64_mem_r): Define.
(aarch64_record_result): New enum.
(struct insn_decode_record): Define.
(insn_decode_record): New typedef.
(aarch64_record_data_proc_reg): New function.
(aarch64_record_data_proc_imm): New function.
(aarch64_record_branch_except_sys): New function.
(aarch64_record_load_store): New function.
(aarch64_record_data_proc_simd_fp): New function.
(aarch64_record_asimd_load_store): New function.
(aarch64_record_decode_insn_handler): New function.
(deallocate_reg_mem): New function.
(aarch64_process_record): New function.
* aarch64-tdep.h (struct gdbarch_tdep) <aarch64_syscall_record>:
New field.
(aarch64_process_record): New extern declaration.
* configure.tgt: Add linux-record.o to gdb_target_obs.
* linux-record.h (struct linux_record_tdep) <arg7>: New field.
IIUC it is a pre-requisite for IPv6 support, some UNICes do not support
getaddrinfo required for IPv6. But coincidentally such UNICes are no longer
really supported by GDB. Therefore it was concluded we can remove all such
UNICes and then we can implement IPv6 easily with getaddrinfo.
In mail
Re: getaddrinfo available on all GDB hosts? [Re: [PATCH v2] Add IPv6 support for remote TCP connections]
Message-ID: <20140211034157.GG5485@adacore.com>
https://sourceware.org/ml/gdb-patches/2014-02/msg00333.html
Joel said:
So I chose HP-UX first for this patch.
gdb/ChangeLog
2014-10-16 Jan Kratochvil <jan.kratochvil@redhat.com>
Remove HPUX.
* Makefile.in (ALL_64_TARGET_OBS): Remove ia64-hpux-tdep.o.
(ALL_TARGET_OBS): Remove hppa-hpux-tdep.o, solib-som.o and solib-pa64.o.
(HFILES_NO_SRCDIR): Remove solib-som.h, inf-ttrace.h, solib-pa64.h and
ia64-hpux-tdep.h, solib-ia64-hpux.h.
(ALLDEPFILES): Remove hppa-hpux-tdep.c, hppa-hpux-nat.c,
ia64-hpux-nat.c, ia64-hpux-tdep.c, somread.c and solib-som.c.
* config/djgpp/fnchange.lst: Remove hppa-hpux-nat.c and
hppa-hpux-tdep.c.
* config/ia64/hpux.mh: Remove file.
* config/pa/hpux.mh: Remove file.
* configure: Rebuilt.
* configure.ac (dlgetmodinfo, somread.o): Remove.
* configure.host (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
(ia64-*-hpux*): Remove its float format exception.
* configure.tgt (hppa*-*-hpux*, ia64-*-hpux*): Make them obsolete.
* hppa-hpux-nat.c: Remove file.
* hppa-hpux-tdep.c: Remove file.
* hppa-tdep.c (struct hppa_unwind_info, struct hppa_objfile_private):
Move them here from hppa-tdep.h
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Make it static.
(hppa_frame_prev_register_helper): Remove HPPA_FLAGS_REGNUM exception.
* hppa-tdep.h (struct hppa_unwind_info, struct hppa_objfile_private):
Move them to hppa-tdep.c.
(hppa_objfile_priv_data, hppa_init_objfile_priv_data): Remove
declarations.
* ia64-hpux-nat.c: Remove file.
* ia64-hpux-tdep.c: Remove file.
* ia64-hpux-tdep.h: Remove file.
* inf-ttrace.c: Remove file.
* inf-ttrace.h: Remove file.
* solib-ia64-hpux.c: Remove file.
* solib-ia64-hpux.h: Remove file.
* solib-pa64.c: Remove file.
* solib-pa64.h: Remove file.
* solib-som.c: Remove file.
* solib-som.h: Remove file.
* somread.c: Remove file.
This patch is to add SDE OS ABI support in GDB, which has been used in
codesourcery gdb tree for some years.
gdb:
2014-12-19 Maciej W. Rozycki <macro@codesourcery.com>
Nigel Stephens <nigel@mips.com>
Chris Dearman <chris@mips.com>
Luis Machado <lgustavo@codesourcery.com>
* Makefile.in (ALL_TARGET_OBS): Add mips-sde-tdep.o.
(ALLDEPFILES): Add mips-sde-tdep.c.
* mips-sde-tdep.c: New file containg SDE specific code.
* configure.tgt (mips*-sde*-elf*): Add mips-sde-dep.o to
gdb_target_obs.
* defs.h (gdb_osabi): Add GDB_OSABI_SDE.
* osabi.c (gdb_osabi_names): Add SDE.
* NEWS: Mention the change.
This commit does most of the mechanical removal. IOW, the easy part.
procfs.c isn't touched beyond removing a couple obvious bits that are
guarded by a couple macros defined in config/alpha/nm-osf3.h. Going
beyond that for procfs.c & co would be a harder excision that
potentially affects Solaris.
Some comments in the generic alpha code ABIs that may still be
relevant and I wouldn't know what to do with them. That can always be
done on a separate pass, preferably by someone who can test on alpha.
A couple other spots have references to OSF/Tru64 and related files
being removed, but it felt like removing them would make things worse,
not better. We can revisit those when we next need to touch that
code.
I didn't remove a reference to osf in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=alpha-osf3 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration alpha-unknown-osf3 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `build-osf'
make: *** [all] Error 2
gdb/
2014-10-17 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_64_TARGET_OBS): Remove alpha-osf1-tdep.o.
(HFILES_NO_SRCDIR): Remove config/alpha/nm-osf3.h.
(ALLDEPFILES): Remove alpha-nat.c, alpha-osf1-tdep.c and
solib-osf.c.
* NEWS: Mention that support for alpha*-*-osf* has been removed.
* ada-lang.h [__alpha__ && __osf__]
(ADA_KNOWN_RUNTIME_FILE_NAME_PATTERNS): Delete.
* alpha-nat.c, alpha-osf1-tdep.c: Delete files.
* alpha-tdep.c (alpha_gdbarch_init): Remove reference to
GDB_OSABI_OSF1.
* config/alpha/alpha-osf3.mh, config/alpha/nm-osf3.h: Delete
files.
* config/djgpp/fnchange.lst (config/alpha/alpha-osf1.mh)
(config/alpha/alpha-osf2.mh, config/alpha/alpha-osf3.mh): Delete.
* configure: Regenerate.
* configure.ac: Remove references to osf.
* configure.host: Handle alpha*-*-osf* in the obsolete hosts
section. Remove all other references to osf.
* configure.tgt: Add alpha*-*-osf* to the obsolete targets section.
Remove all other references to osf.
* dec-thread.c: Delete file.
* defs.h (GDB_OSABI_OSF1): Delete.
* inferior.h (START_INFERIOR_TRAPS_EXPECTED): New unconditionally
defined.
* osabi.c (gdb_osabi_names): Delete "OSF/1".
* procfs.c (procfs_debug_inferior) [PROCFS_DONT_TRACE_FAULTS]:
Delete code.
(unconditionally_kill_inferior)
[PROCFS_NEED_CLEAR_CURSIG_FOR_KILL]: Delete code.
* solib-osf.c: Delete file.
gdb/testsuite/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.base/callfuncs.exp: emove references to osf.
* gdb.base/sigall.exp: Likewise.
* gdb.gdb/selftest.exp: Likewise.
* gdb.hp/gdb.base-hp/callfwmall.exp: Likewise.
* gdb.mi/non-stop.c: Likewise.
* gdb.mi/pthreads.c: Likewise.
* gdb.reverse/sigall-precsave.exp: Likewise.
* gdb.reverse/sigall-reverse.exp: Likewise.
* gdb.threads/pthreads.c: Likewise.
* gdb.threads/pthreads.exp: Likewise.
gdb/doc/
2014-10-17 Pedro Alves <palves@redhat.com>
* gdb.texinfo (Ada Tasks and Core Files): Delete mention of Tru64.
(SVR4 Process Information): Delete mention of OSF/1.
This does most of the mechanical removal. IOW, the easy part.
This doesn't touch procfs.c as that'd be a harder excision,
potentially affecting Solaris.
mips-tdep.c is left alone. E.g., I didn't delete the GDB_OSABI_IRIX
enum value, nor references to it in mips-tdep.c. Some comments
mentioning IRIX ABIs may still be relevant and I wouldn't know what to
do with them. in That can always be done on a separate pass,
preferably by someone who can test on MIPS.
I didn't remove a reference to IRIX in testsuite/lib/future.exp, as I
believe that code is imported from DejaGNU.
Built and tested on x86_64 Fedora 20, with --enable-targets=all.
Tested that building for --target=mips-sgi-irix6 on x86_64 Fedora 20
fails with:
checking for default auto-load directory... $debugdir:$datadir/auto-load
checking for default auto-load safe-path... $debugdir:$datadir/auto-load
*** Configuration mips-sgi-irix6 is obsolete.
*** Support has been REMOVED.
make[1]: *** [configure-gdb] Error 1
make[1]: Leaving directory `/home/pedro/gdb/mygit/build-irix'
make: *** [all] Error 2
gdb/
2014-10-10 Pedro Alves <palves@redhat.com>
* Makefile.in (ALL_TARGET_OBS): Remove mips-irix-tdep.o and solib-irix.o.
(ALLDEPFILES): Remove mips-irix-tdep.c and solib-irix.c.
(HFILES_NO_SRCDIR): Remove solib-irix.h.
* NEWS: Mention that support for mips-sgi-irix5* mips-sgi-irix6*
and been removed.
* config/mips/irix5.mh, config/mips/irix6.mh: Delete files.
* configure.ac: Remove references to IRIX.
* configure.host: Add *-*-irix* to the obsolete hosts section.
Remove all other references to irix.
* irix5-nat.c, mips-irix-tdep.c, solib-irix.c, solib-irix.h:
Delete files.
gdb/testsuite/
2014-10-10 Pedro Alves <palves@redhat.com>
* gdb.base/bigcore.exp: Remove references to IRIX.
* gdb.base/funcargs.exp: Likewise.
* gdb.base/interrupt.exp: Likewise.
* gdb.base/mips_pro.exp: Likewise.
* gdb.base/nodebug.exp: Likewise.
* gdb.base/setvar.exp: Likewise.
* lib/gdb.exp (gdb_compile_shlib): Remove mips-sgi-irix* case.