As suggested before, rename the S/390-related source files (tdep and nat)
such that "-linux-" occurs in the file name, like with other GNU/Linux
targets. Since no other operating system is currently supported by GDB
on this architecture, this isn't strictly necessary. But the old names
sometimes caused GDB contributors to miss these files when performing a
change that affects all GNU/Linux targets. The latest such incident was
observed here:
https://sourceware.org/ml/gdb-patches/2013-09/msg00619.html
gdb/
2013-10-30 Andreas Arnez <arnez@linux.vnet.ibm.com>
* s390-tdep.h: Rename to...
* s390-linux-tdep.h: ...here.
* s390-tdep.c: Rename to...
* s390-linux-tdep.c: ...here. Adjust #include.
* s390-nat.c: Rename to...
* s390-linux-nat.c: ...here. Adjust #include.
* config/s390/s390.mh: Rename to...
* config/s390/linux.mh: ...here. Reflect rename s390-nat.o ->
s390-linux-nat.o.
* configure.host: Reflect host rename "s390" -> "linux".
* configure.tgt: Reflect rename s390-tdep.o -> s390-linux-tdep.o.
* Makefile.in (ALL_TARGET_OBS): Likewise.
(HFILES_NO_SRCDIR): Reflect rename s390-tdep.h ->
s390-linux-tdep.h.
(ALLDEPFILES): Reflect rename of .c files.
* arm-wince-tdep.c: Remove inclusion of "solib.h" and
"solib-target.h". Include "windows-tdep.h".
(arm_wince_init_abi): Call windows_init_abi. Remove call to
set_solib_ops and set_gdbarch_has_dos_based_file_system.
* configure.tgt (arm*-wince-pe | arm*-*-mingw32ce*): Append
windows-tdep.o to gdb_target_obs.
This brings in some standard functionality hitherdo missing from
the CRIS/CRISv32 port thanks to the new call to gdbarch_init_osabi,
as well as clearly showing that there is Linux support for this
platform by virtue of the existence of a cris-linux-tdep.c file.
2013-09-06 Ricard Wanderlof <ricardw@axis.com>
* Makefile.in (ALL_TARGET_OBS): Add cris-linux-tdep.o.
* configure.tgt: Add cris-linux-tdep.o and linux-tdep.o to
gdb_target_obs for cris target.
* cris-tdep.c (struct gdbarch_tdep): Move to cris-tdep.h.
(cris_gdbarch_init): Move calls to
set_gdbarch_fetch_tls_load_module_address and
set_solib_svr4_fetch_link_map_offsets to cris-linux-tdep.c.
Add call to gdbarch_init_osabi.
* cris-linux-tdep.c: New file.
* cris-tdep.h: New file.
Andrew Jenner <andrew@codesourcery.com>
Chung-Lin Tang <cltang@codesourcery.com>
Julian Brown <julian@codesourcery.com>
Based on the nios2-elf port from Altera Corporation.
gdb/
* Makefile.in (ALL_TARGET_OBS): Add nios2-tdep.o and
nios2-linux-tdep.o.
(HFILES_NO_SRCDIR): Add nios2-tdep.h.
(ALLDEPFILES): Add nios2-tdep.c and nios2-linux-tdep.c.
* configure.tgt: Add nios2*-*-linux* and nios2*-*-* targets.
* nios2-tdep.h: New.
* nios2-tdep.c: New.
* nios2-linux-tdep.c: New.
* features/Makefile (WHICH): Add nios2-linux.
(nios2-linux-expedite): Set.
* features/nios2-cpu.xml: New.
* features/nios2.xml: New.
* features/nios2-linux.xml: New.
* features/nios2.c: New (autogenerated).
* features/nios2-linux.c: New (autogenerated).
* regformats/nios2-linux.dat: New (autogenerated).
* NEWS (Changes since GDB 7.6): Add new Nios II targets
and commands.
gdb/doc/
* gdb.texinfo (Nios II): New section.
(Nios II Features): New section.
* Makefile.in (ALL_TARGET_OBS): Add ppc64-tdep.o.
(HFILES_NO_SRCDIR): Add ppc64-tdep.h.
(ALLDEPFILES): Add ppc64-tdep.c.
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
ppc64-tdep.o to gdb_target_obs.
* ppc64-tdep.h: New file.
* ppc64-tdep.c: New file.
(insn_d, insn_ds, insn_xfx, ppc64_desc_entry_point): Move from
ppc-linux-tdep.c to here.
(PPC64_STANDARD_LINKAGE1_LEN, PPC64_STANDARD_LINKAGE2_LEN)
(PPC64_STANDARD_LINKAGE2_LEN): Likewise and use ARRAY_SIZE macro.
(ppc64_standard_linkage1_target, ppc64_standard_linkage2_target)
(ppc64_standard_linkage3_target, ppc64_skip_trampoline_code): Move
from ppc-linux-tdep.c to here.
(ppc64_convert_from_func_ptr_addr): Rename from
ppc64_linux_convert_from_func_ptr_addr to
ppc64_convert_from_func_ptr_addr and move from ppc-linux-tdep.c to
here.
* rs6000-tdep.c:
(read_insn): Move from ppc-linux-tdep.c to here.
(insns_match_pattern, insn_d_field, insn_ds_field): Move
from ppc-linux-tdep.c to here and rename them with the ppc_ prefix.
* ppc-linux-tdep.c: Include ppc64-tdep.h.
Removed above functions.
(ppc_linux_init_abi): Adjust.
gdb/ChangeLog:
* defs.h (enum gdb_osabi): Add GDB_OSABI_LYNXOS178.
* osabi.c (gdb_osabi_names): Add entry for GDB_OSABI_LYNXOS178.
* xcoffread.c (xcoff_get_core_n_import_files): New function.
(xcoff_get_n_import_files): New function.
* xcoffread.h (xcoffread.h): Add declaration.
* rs6000-aix-tdep.c: #include "xcoffread.h".
(rs6000_aix_osabi_sniffer): Do not return GDB_OSABI_AIX for
XCOFF executables that do not depend on any shared library.
* rs6000-lynx178-tdep.c: New file.
* configure.tgt: Add powerpc-*-lynx*178 handling.
* Makefile.in (ALL_TARGET_OBS): Add rs6000-lynx178-tdep.o.
(ALLDEPFILES): Add rs6000-lynx178-tdep.c.
This appears to be an oversight, since this is done already for
sparc64-*-linux*, and essentially every other linux target.
gdb/
* configure.tgt (sparc-*-linux*): Set build_gdbserver to yes.
* configure.tgt (powerpc-*-linux*): Add glibc-tdep.o.
* ppc-linux-tdep.c: Include glibc-tdep.h.
(powerpc32_plt_stub, powerpc32_plt_stub_so): Add PLT stub templates.
(powerpc_linux_in_plt_stub): New function.
(powerpc_linux_in_dynsym_resolve_code): New function.
(ppc_skip_trampoline_code): New function.
(ppc_linux_init_abi): Use PPC specific functions rather than generic.
Use glibc_skip_solib_resolver.
* configure.tgt: Handle tic6x-*-*linux and tic6x-*-*.
* solib-dsbt.c: New file. Support DSBT shared object.
* tic6x-linux-tdep.c: New file.
* tic6x-tdep.c: New file.
* tic6x-tdep.h: New file.
Initial support for Blackfin processors. This supports the standard ABI.
Signed-off-by: Jie Zhang <jie.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gdb/ChangeLog (Jerome Guitton, Joel Brobecker):
* ravenscar-thread.c, ravenscar-thread.h, ravenscar-sparc-thread.c:
New files.
* configure.tgt (sparc-*-*): Add ravenscar-thread.o and
ravenscar-sparc-thread.o to gdb_target_obs.
This is a fairly simple patch that we have had for a while. LynxOS has
relatively few features, from a GDB perspective, and we've been using
a bareboard x86 debugger as our LynxOS cross-debugger. So here is a patch
that make x86-lynxos an alias of bareboard x86.
On the other end of things, I'm still working on gdbserver support
for LynxOS - I'm just lacking the time to make significant progress.
But this is in the works (in the meantime, we're using gdbserver from
gdb-6.8 which is derived work from LinuxWorks' patch).
I wasn't sure whether this would be interesting or not for the FSF tree,
but since it's simple and unintrusive, I am suggesting it now... Any
objection? I wasn't sure whether it warranted a NEWS entry either, since
it doesn't really add a new port, just an alias. I suggest the NEWS entry
when I'm finally done with the gdbserver port.
gdb/ChangeLog:
* configure.tgt: Treat x86-lynxos targets as x86 bareboard targets
in terms of configuration.
Joel Brobecker <brobecker@adacore.com>
* Makefile.in (HFILES_NO_SRCDIR): Remove shnbsd-tdep.h
* configure.tgt (sh*-*-linux*): Add corelow.o to gdb_target_obs.
* sh-linux-tdep.c: Include sh-tdep.h.
(REGSx16): New macro.
(gregs_table, fpregs_table): New variables.
(sh_linux_init_abi): Set core_gregmap and fpregmap.
* sh-tdep.c: Include regset.h.
(sh_corefile_supply_regset): New function.
(sh_corefile_collect_regset): New function.
(sh_corefile_gregset, sh_corefile_fpregset): New variables.
(sh_regset_from_core_section): New function.
(sh_gdbarch_init): Set up tdep value.
Call set_gdbarch_regset_from_core_section.
* sh-tdep.h (PC_REGNUM): New enum value.
(struct sh_corefile_regs): New type.
(sh_corefile_gregset): Export variable.
(sh_corefile_supply_regset): New prototype.
(sh_corefile_collect_regset): New prototype.
* shnbsd-tdep.c: Remove include of regcache.h, gdb_assert.h and
shnbsd-tdep.h.
(regmap): Use new definition using struct sh_corefile_regs.
(shnbsd_supply_gregset, shnbsd_collect_gregset): Delete.
(shnbsd_gregset): Delete.
(shnbsd_regset_from_core_section): Delete.
(shnbsd_supply_reg, shnbsd_fill_reg): Use new regset interface.
(shnbsd_init_abi): Set core_gregmap.
(shnbsd_supply_reg): Delete.
(shnbsd_fill_reg): Delete.
(SHNBSD_SIZEOF_GREGS): Move ...
* shnbsd-nat.c (SHNBSD_SIZEOF_GREGS): ... to here.
Remove include of shnbsd-tdep.h.
(shnbsd_fetch_inferior_registers): Replace shnbsd_supply_reg call
with sh_corefile_supply_regset.
(shnbsd_store_inferior_registers): Replace shnbsd_fill_reg call with
sh_corefile_collect_regset.
* shnbsd-tdep.h: Delete file.
* target.h (enum strata): New value arch_stratum.
* target.c (target_require_runnable): Skip arch_stratum targets.
* configure.tgt (powerpc-*-linux* | powerpc64-*-linux*): Add
solib-spu.o and spu-multiarch.o to gdb_target_obs.
* Makefile.in (ALL_TARGET_OBS): Add solib-spu.o and spu-multiarch.o.
(ALLDEPFILES): Add solib-spu.c and spu-multiarch.c.
* solib-spu.c: New file.
* solib-spu.h: New file.
* spu-multiarch.c: New file.
* spu-tdep.h (SPUADDR, SPUADDR_SPU, SPUADDR_ADDR): New macros.
* spu-tdep.c (struct gdbarch_tdep): New member id.
(spu_gdbarch_id): New function.
(spu_lslr): New function.
(spu_address_to_pointer): New function.
(spu_pointer_to_address): Support SPU ID address encoding. Use
spu_gdbarch_id and spu_lslr.
(spu_integer_to_address): Likewise.
(spu_frame_unwind_cache): Update for encoded addresses.
(spu_unwind_pc, spu_unwind_sp): Likewise.
(spu_read_pc, spu_write_pc): Likewise.
(spu_push_dummy_call): Likewise.
(spu_software_single_step): Likewise.
(spu_get_longjmp_target): Likewise.
(spu_overlay_update_osect): Likewise.
(spu_dis_asm_print_address): New function.
(gdb_print_insn_spu): Likewise.
(spu_gdbarch_init): Store SPU ID in tdep structure.
Install spu_address_to_pointer and gdb_print_insn_spu.
* ppc-linux-tdep.c: Include "observer.h", "auxv.h", "elf/common.h"
and "solib-spu.h".
(ppc_linux_entry_point_addr): New static variable.
(ppc_linux_inferior_created): New function.
(ppc_linux_displaced_step_location): Likewise.
(ppc_linux_init_abi): Enable Cell/B.E. support if supported
by the target.
(_initialize_ppc_linux_tdep): Attach to inferior_created observer.
* NEWS: Mention multi-architecture and Cell/B.E. debugging
capabilities.
testsuite/ChangeLog:
* gdb.xml/tdesc-regs.exp: Skip for SPU targets.
* i386-darwin-tdep.c (amd64_darwin_thread_state_reg_offset)
(amd64_darwin_thread_state_num_regs)
(amd64_darwin_sigcontext_addr, x86_darwin_init_abi_64): Moved to
amd64-darwin-tdep.c
(_initialize_i386_darwin_tdep): Remove 64 bits parts.
(darwin_dwarf_signal_frame_p): Make public.
* amd64-darwin-tdep.c: New file with most chunks from
i386-darwin-tdep.c
* i386-darwin-tdep.h: Add a prototype for darwin_dwarf_signal_frame_p.
(amd64_darwin_thread_state_reg_offset)
(amd64_darwin_thread_state_num_regs): Moved to amd64-darwin-tdep.h
* amd64-darwin-tdep.h: New file.
* i386-darwin-nat.c: Only includes amd64-nat.h and amd64-darwin-tdep.h
if BFD64 is defined.
(i386_darwin_fetch_inferior_registers): Add #ifdef BFD64/#endif around
64 bits parts.
(i386_darwin_store_inferior_registers): Ditto.
(darwin_set_sstep): Ditto.
(darwin_complete_target): Ditto.
(amd64_darwin_sstep_at_sigreturn): Ditto.
* configure.tgt: Create a separate entry for x86_64-*-darwin.
Add 64 bits support for i386-*-darwin if --enable-64-bit-bfd.
* Makefile.in (ALLDEPFILES): Add amd64-darwin-tdep.c, darwin-nat.c,
i386-darwin-tdep.c i386-darwin-nat.c
(ALL_64_TARGET_OBS): Add amd64-darwin-tdep.o
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add lm32 target.
* Makefile.in: Add lm32 dependencies.
* NEWS: Indicate lm32 is a new target.
* configure.tgt: Add lm32 targets.
* lm32-tdep.c: New file.
gdb/testsuite
2009-05-18 Jon Beniston <jon@beniston.com>
* gdb.asm/asm-source.exp: Add lm32 target.
include/gdb/
2009-05-18 Jon Beniston <jon@beniston.com>
* sim-lm32.h: New file.
sim/
2009-05-18 Jon Beniston <jon@beniston.com>
* MAINTAINERS: Add Jon Beniston as maintainer of lm32 sim.
* configure.ac: Add lm32 target.
* lm32: New directory.
sim/common
2009-05-18 Jon Beniston <jon@beniston.com>
* gennltvals.sh: Add lm32 target.
* nltvals.def: Add lm32 syscall definitions.
sim/lm32/
2009-05-18 Jon Beniston <jon@beniston.com>
* Makefile.in: New file.
* arch.c: New file.
* arch.h: New file.
* config.in: New file.
* configure: New file.
* configure.ac: New file.
* cpu.c: New file.
* cpu.h: New file.
* cpuall.h: New file.
* decode.c: New file.
* decode.h: New file.
* dv-lm32cpu.c: New file.
* dv-lm32timer.c: New file.
* dv-lm32uart.c: New file.
* lm32.c: New file.
* lm32-sim.h: New file.
* mloop.in: New file.
* model.c: New file.
* sem.c: New file.
* sem-switch.c: New file.
* sim-if.c: New file.
* sim-main.c: New file.
* tconfig.in: New file.
* traps.c: New file.
* user.c: New file.
* machoread.c (macho_symfile_read): Read minsymtab also from
shared libraries.
(macho_symfile_read): Try to read dwarf2 frame info from main
object file, but not from OSO files.
(macho_symfile_offsets): Update section names for latest BFD
changes.
* i386-darwin-tdep.c (i386_darwin_init_abi): Call set_solib_ops.
(x86_darwin_init_abi_64): Ditto.
* solib-darwin.c: New file.
* solib-darwin.h: New file.
* configure.tgt: Add solib.o solib-darwin.o for Darwin.
* config/i386/mingw64.mh, config/i386/nm-cygwin64.h: New files.
* configure.host, configure.tgt: Add handling for x86_64/windows.
* config/djgpp/fnchange.lst: Add entries for amd64-windows-nat.c
and amd64-windows-tdep.c.
* i386-cygwin-tdep.h: Delete.
* i386-cygwin-tdep.c: Include win32-tdep.h instead of
i386-cygwin-tdep.h.
(win32_xfer_shared_library): Delete. Moved to win32-tdep.c.
* win32-nat.c: Likewise.
* configure.tgt: Add win32-tdep.o to the list of target object
files for i386-cygwin and i386-mingw targets.
2008-11-27 Tristan Gingold <gingold@adacore.com>
* NEWS: Add entry for new native configuration: Darwin.
* configure.host: Add Darwin host.
* configure.tgt: Add Darwin target.
* defs.h (enum gdb_osabi): Add GDB_OSABI_DARWIN.
* osabi.c (gdb_osabi_names): Add name for Darwin abi.
* i386-darwin-nat.c: New file.
* i386-darwin-tdep.c: New file.
* machoread.c: New file.
* darwin-nat-info.c: New file.
* darwin-nat.c: New file.
* darwin-nat.h: New file.
* darwin.defs: New file.
* config/i386/darwin.mh: New file.
gdb/doc:
2008-11-27 Tristan Gingold <gingold@adacore.com>
* gdb.texinfo (Darwin): Document Darwin specific features.
comments.
(mips_linux_skip_resolver): Also use glibc_skip_solib_resolver.
(mips_linux_init_abi): Do not override skip_trampoline_code.
* configure.tgt (mips*-*-linux*): Add glibc-tdep.o.
* mips-tdep.c (mips32_scan_prologue): Stop scanning at branches.
(mips_stub_frame_sniffer): Use the stub frame sniffer for PIC stubs.
(mips_skip_mips16_trampoline_code): Rename from
mips_skip_trampoline_code.
(mips_skip_pic_trampoline_code, mips_skip_trampoline_code): New.
* infrun.c (handle_inferior_event): Do not pass zero to
in_solib_dynsym_resolve_code.
* Makefile.in (xtensa-tdep.o): Update dependencies.
* configure.tgt (xtensa*): Update dependencies.
* xtensa-tdep.c (arreg_number): Renamed from areg_number.
Local variable areg renamed to arreg.
(areg_number): New function.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_extract_return_value, xtensa_store_return_value): areg_number
replaced by arreg_number.
(xtensa_windowed_frame_cache, struct xtensa_frame_cache): New comments.
(xtensa_alloc_frame_cache): Initialize cache->wd.ws.
(xtensa_scan_prologue): New function.
(xtensa_frame_cache): New local fp_regnum. Handle separately the case,
when ENTRY instraction hasn't been executed yet. Get the frame pointer
value based on prologue analysis. Fix the bugs preventing WS and
AR4-AR7/A11 registers from getting right values for intermediate frames,
whose registers have been already spilled.
(xtensa_frame_prev_register): Fix WS register value. Use are_number
and arreg_number appropriately.
(xtensa_gdbarch_init): Set solib_svr4_fetch_link_map_offsets to
svr4_ilp32_fetch_link_map_offsets.
* NEWS (New native configurations): Xtensa GNU/Linux.
(New targets): Xtensa GNU/Linux.
* Makefile.in (ALL_TARGET_OBS): Add xtensa-linux-nat.o and
xtensa-linux-tdep.o
(ALLDEPFILES): Add xtensa-linux-tdep.c and xtensa-linux-nat.c
(xtensa-linux-nat.o, xtensa-linux-tdep.o): New dependencies.
* configure.tgt (xtensa*-*-linux*): New entry.
* xtensa-config.c (xtensa_tdep): New variable.
(xtensa_config_byte_order, xtensa_config_tdep): Removed.
(rmap): Change format based on new macro XTREG.
(XTENSA_CONFIG_INSTANTIATE): Use new macro defined in xtensa-tdep.h.
* xtensa-linux-nat.c: New.
* xtensa-linux-tdep.c: New.
* xtensa-xtregs.c: New.
* xtensa-tdep.h (xtensa_elf_gregset_t): Update.
(XTENSA_ELF_NGREG, XTREG, XTREG_END, XTENSA_GDBARCH_TDEP_INSTANTIATE)
(XCHAL_NUM_CONTEXTS, XCHAL_HAVE_EXCEPTIONS): New macros.
(xtensa_register_t): New field coprocessor.
(XTENSA_REGISTER_FLAGS_PRIVILEGED): Name spelling corrected.
* xtensa-tdep.c (xtensa_config_tdep, xtensa_config_byte_order): Removed.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write):
Update to handle privileged registers.
(xtensa_supply_gregset) Remove exccause and excvaddr registers.
(xtensa_push_dummy_call): Set windowstart register correctly.
(call0_analyze_prologue): Initialize xtensa_default_isa.
(xtensa_derive_tdep): New.
(xtensa_gdbarch_init): Get rid of xtensa_config_byte_order and
xtensa_config_tdep, use XCHAL_HAVE_BE and xtensa_tdep instead.
Call xtensa_derive_tdep().
* config/xtensa/linux.mh: New.
* regformats/reg-xtensa.dat: New.
* hppabsd-tdep.c (hppabsd_supply_gregset): Move to ...
(hppabsd_gregset): Move to ...
(hppabsd_regset_from_core_section): Rename
hppaobsd_regset_from_core_section and move to ...
(hppabsd_find_global_pointer): Update comment.
(hppabsd_init_abi): Make global. Do not register
hppabsd_regset_from_core_section.
(hppabsd_core_osabi_sniffer): Rename hppaobsd_core_osabi_sniffer and
move to ...
(_initialize_hppabsd_tdep): Move to ...
* hppaobsd-tdep.c: ... here. New file.
* hppnbsd-tdep.c: New file.
* hppnbsd-nat.c: New file.
* Makefile.in (ALL_TARGET_OBS): Add hppanbsd-tdep.o and hppaobsd-tdep.o.
(ALLDEPFILES): Add hppabsd-nat.c and hppabsd-tdep.c.
(hppabsd-nat.o, hppabsd-tdep.o): New dependencies.
(hppabsd-tdep.o, hppaobsd-tdep.o): Update dependencies.
* configure.host (hppa*-*-netbsd*): New entry.
* configure.tgt (hppa*-*-netbsd*): New entry.
(hppa*-*-openbsd*): Update.
* NEWS (New native configuration): Mention NetBSD/hppa.
(New targets): Mention NetBSD/hppa.
* configure.tgt (i[34567]86-*-mingw32*): Set gdb_target = mingw.
* win32-nat.c: Only include cygwin.h on Cygwin host. Don't
include procfs.h.
(cygwin_load_start, cygwin_load_end, cygwin_exceptions): Disable
if not building on Cygwin.
(win32_make_so, handle_output_debug_string, handle_exception)
(do_initial_win32_stuff): Wrap Cygwin specific code in __CYGWIN__.
(win32_attach): Only fallback to Cygwin pids if building on
Cygwin.
(win32_pid_to_exec_file): Disable Cygwin specific code, if not
building on Cygwin.
(win32_create_inferior): Disable starting the inferior through a
shell, environment var processing and tty handling if not building
on Cygwin.
(cygwin_pid_to_str): Rename to ...
(win32_pid_to_str): ... this.
(init_win32_ops): Update use of win32_pid_to_str. Disable "shell"
and "cygwin-exceptions" commands if not building on Cygwin.
Ulrich Weigand
Yao Qi
Ricard Wanderlof
Alan Modra
Ulrich Weigand
Kevin Buettner
Sandra Loosemore
Joel Brobecker
Jan Kratochvil
Corinna Vinschen
Jiong Wang
Anthony Green
Andreas Tobler
Marcus Shawcroft
Richard Henderson
Ralf Corsepius
Pedro Alves
David S. Miller
Tristan Gingold
Michael Eager
Joseph Myers
Mike Frysinger
Masaki Muranaka
Pierre Muller
Andrew Stubbs
Don Lee
Aleksandar Ristovski
Jon Beniston
Hui Zhu
Christopher Faylor
Daniel Jacobowitz
Maxim Grigoriev
Nick Hudson
Kazu Hirata